component
TS880ILT
Public Made by Adomby adom
STMicroelectronics Comparators, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTS880ILT
STMicroelectronics · Comparators · SOT-23-5
TS880ILT from STMicroelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Open-drain comparator output; the datasheet gives an output voltage range of 0 to 5.5 V (VOUT) in Table 2. |
| 2 | VCC- | power_in | Negative supply rail; all voltages are referenced to VCC-, and VCC is defined as VCC+ minus VCC- with a 0.9 V to 5.5 V operating range. |
| 3 | IN+ | input | Non-inverting input with rail-to-rail capability; the common-mode range is (VCC-) - 0.2 V to (VCC+) + 0.2 V, and the input current must be limited by a series resistor when the input voltage is beyond the supply. |
| 4 | IN- | input | Inverting input with rail-to-rail capability; the common-mode range is (VCC-) - 0.2 V to (VCC+) + 0.2 V, and the input current must be limited by a series resistor when the input voltage is beyond the supply. |
| 5 | VCC+ | power_in | Positive supply rail, 0.9 V to 5.5 V operating (absolute maximum supply voltage 6 V); input and output voltages must not exceed the supply rails by more than 0.3 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
TS880ILT - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
ts880ilt-etched.step/ts880ilt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ts880ilt.step/ts880ilt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (31 pp, sha256
ff960c01a2ad505d, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).