# TS5V330DBQR

**Texas Instruments** · Analog Switches, Multiplexers · SSOP-16

TS5V330DBQR from Texas Instruments, in a SSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | input | Select input that picks S1 (low) or S2 (high) for the D port; VIH 2 V min, VIL 0.8 V max, tolerates up to 5.5 V. |
| 2 | S1A | bidirectional | Analog video I/O S1 of channel A, connected to DA when EN is low and IN is low; analog range 0 V to VCC. |
| 3 | S2A | bidirectional | Analog video I/O S2 of channel A, connected to DA when EN is low and IN is high; analog range 0 V to VCC. |
| 4 | DA | bidirectional | Analog video I/O common D port of channel A, connected to S1A or S2A as selected by IN. |
| 5 | S1B | bidirectional | Analog video I/O S1 of channel B, connected to DB when EN is low and IN is low; analog range 0 V to VCC. |
| 6 | S2B | bidirectional | Analog video I/O S2 of channel B, connected to DB when EN is low and IN is high; analog range 0 V to VCC. |
| 7 | DB | bidirectional | Analog video I/O common D port of channel B, connected to S1B or S2B as selected by IN. |
| 8 | GND | power_in | Ground; unused control inputs must be held at VCC or GND. |
| 9 | DC | bidirectional | Analog video I/O common D port of channel C, connected to S1C or S2C as selected by IN. |
| 10 | S2C | bidirectional | Analog video I/O S2 of channel C, connected to DC when EN is low and IN is high; analog range 0 V to VCC. |
| 11 | S1C | bidirectional | Analog video I/O S1 of channel C, connected to DC when EN is low and IN is low; analog range 0 V to VCC. |
| 12 | DD | bidirectional | Analog video I/O common D port of channel D, connected to S1D or S2D as selected by IN. |
| 13 | S2D | bidirectional | Analog video I/O S2 of channel D, connected to DD when EN is low and IN is high; analog range 0 V to VCC. |
| 14 | S1D | bidirectional | Analog video I/O S1 of channel D, connected to DD when EN is low and IN is low; analog range 0 V to VCC. |
| 15 | EN | input | Switch-enable input, active low; high gives high impedance between D and S ports, and should be tied to VCC through a pullup resistor to ensure high-Z during power up or down. |
| 16 | VCC | power_in | Supply voltage, 4.5 V to 5.5 V in the features list (recommended conditions table lists 4 V min to 5.5 V); absolute maximum 7 V. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-16 |
| Category | Interface |
| Pins | 16 |

## CAD (KiCad official)

- Symbol: `TS5V330DBQR`
- Footprint: `Package_SO:SSOP-16_5.3x6.2mm_P0.65mm`
- 3D model: SSOP-16 (KiCad packages3D, STEP)
- 3D model files: `ts5v330dbqr-etched.step` / `ts5v330dbqr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ts5v330dbqr.step` / `ts5v330dbqr.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ts5v330) (29 pp, sha256 `7df0085f50f3e57e`, retrieved 2026-10-03, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/ts5v330dbqr-datasheet.pdf)