component
TS5V330CDR
Public Made by Adomby adom
Texas Instruments Analog Switches, Multiplexers, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTS5V330CDR
Texas Instruments · Analog Switches, Multiplexers · SOIC-16
TS5V330CDR from Texas Instruments, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | input | Select input that chooses S1 (IN low) or S2 (IN high) as the port connected to D; logic high is 2 V to 5.5 V and logic low is 0 V to 0.8 V. |
| 2 | S1A | bidirectional | Analog video I/O S1 of channel A, connected to DA when EN is low and IN is low. |
| 3 | S2A | bidirectional | Analog video I/O S2 of channel A, connected to DA when EN is low and IN is high. |
| 4 | DA | bidirectional | Analog video I/O D port of channel A, with analog voltage range 0 to VCC. |
| 5 | S1B | bidirectional | Analog video I/O S1 of channel B, connected to DB when EN is low and IN is low. |
| 6 | S2B | bidirectional | Analog video I/O S2 of channel B, connected to DB when EN is low and IN is high. |
| 7 | DB | bidirectional | Analog video I/O D port of channel B, with analog voltage range 0 to VCC. |
| 8 | GND | power_in | Ground. |
| 9 | DC | bidirectional | Analog video I/O D port of channel C, with analog voltage range 0 to VCC. |
| 10 | S2C | bidirectional | Analog video I/O S2 of channel C, connected to DC when EN is low and IN is high. |
| 11 | S1C | bidirectional | Analog video I/O S1 of channel C, connected to DC when EN is low and IN is low. |
| 12 | DD | bidirectional | Analog video I/O D port of channel D, with analog voltage range 0 to VCC. |
| 13 | S2D | bidirectional | Analog video I/O S2 of channel D, connected to DD when EN is low and IN is high. |
| 14 | S1D | bidirectional | Analog video I/O S1 of channel D, connected to DD when EN is low and IN is low. |
| 15 | EN | input | Switch-enable input, active low (0 V to 0.8 V enables); high (2 V to 5.5 V) gives high impedance between D and S, and it should be tied to VCC through a pullup resistor for power up/down. |
| 16 | VCC | power_in | Supply voltage, 4.5 V to 5.5 V per features (recommended operating conditions table lists 4 V to 5.5 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16 |
| Category | Interface |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
TS5V330CDR - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files:
ts5v330cdr-etched.step/ts5v330cdr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ts5v330cdr.step/ts5v330cdr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (22 pp, sha256
8a253736c91e760b, retrieved 2026-10-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).