component
TS5V330CDBQR
Public Made by Adomby adom
Texas Instruments Analog Switches, Multiplexers, SSOP-16-150mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+52@@ -0,0 +1,52 @@+# TS5V330CDBQR++**Texas Instruments** · Analog Switches, Multiplexers · SSOP-16-150mil++TS5V330CDBQR from Texas Instruments, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | IN | input | Select input that chooses S1 or S2 as the data path for the D port (low selects S1, high selects S2); VIH 2 V min, VIL 0.8 V max. |+| 2 | S1A | bidirectional | Analog video I/O S1 for channel A, connected to DA when EN is low and IN is low. |+| 3 | S2A | bidirectional | Analog video I/O S2 for channel A, connected to DA when EN is low and IN is high. |+| 4 | DA | bidirectional | Analog video I/O D port of channel A, with analog voltage range 0 to VCC. |+| 5 | S1B | bidirectional | Analog video I/O S1 for channel B, connected to DB when EN is low and IN is low. |+| 6 | S2B | bidirectional | Analog video I/O S2 for channel B, connected to DB when EN is low and IN is high. |+| 7 | DB | bidirectional | Analog video I/O D port of channel B, with analog voltage range 0 to VCC. |+| 8 | GND | power_in | Ground. |+| 9 | DC | bidirectional | Analog video I/O D port of channel C, with analog voltage range 0 to VCC. |+| 10 | S2C | bidirectional | Analog video I/O S2 for channel C, connected to DC when EN is low and IN is high. |+| 11 | S1C | bidirectional | Analog video I/O S1 for channel C, connected to DC when EN is low and IN is low. |+| 12 | DD | bidirectional | Analog video I/O D port of channel D, with analog voltage range 0 to VCC. |+| 13 | S2D | bidirectional | Analog video I/O S2 for channel D, connected to DD when EN is low and IN is high. |+| 14 | S1D | bidirectional | Analog video I/O S1 for channel D, connected to DD when EN is low and IN is low. |+| 15 | EN | input | Switch-enable input; low enables the switch, high gives a high-impedance state between D and S ports, and it should be tied to VCC through a pullup resistor to keep high impedance during power up or down. |+| 16 | VCC | power_in | Supply voltage, 4.5 V to 5.5 V operating range in the features (recommended conditions table lists 4 V min to 5.5 V max). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SSOP-16-150mil |+| Category | Interface |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `TS5V330CDBQR`+- Footprint: `Package_SO:SSOP-16_5.3x6.2mm_P0.65mm`+- 3D model: SSOP-16-150mil (KiCad packages3D, STEP)+- 3D model files: `ts5v330cdbqr-etched.step` / `ts5v330cdbqr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ts5v330cdbqr.step` / `ts5v330cdbqr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ts5v330c) (22 pp, sha256 `8a253736c91e760b`, retrieved 2026-10-08, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ts5v330cdbqr-datasheet.pdf)
page.jsonadded+248@@ -0,0 +1,248 @@+{+ "slug": "ts5v330cdbqr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Analog Switches, Multiplexers, SSOP-16-150mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "interface",+ "ts5v330cdbqr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ts5v330cdbqr.kicad_sym",+ "ts5v330cdbqr.kicad_mod",+ "ts5v330cdbqr.glb",+ "ts5v330cdbqr.step",+ "ts5v330cdbqr.lbr",+ "docs/hero.png",+ "docs/ts5v330cdbqr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "ts5v330cdbqr-hero.glb",+ "ts5v330cdbqr-hero.overlay.json"+ ],+ "component": {+ "mpn": "TS5V330CDBQR",+ "manufacturer": "Texas Instruments",+ "package": "SSOP-16-150mil",+ "pin_count": 16,+ "category": "Interface",+ "subcategory": "Analog Switches, Multiplexers",+ "datasheet": "https://www.ti.com/cn/lit/gpn/ts5v330c",+ "parts": {+ "symbol": "ts5v330cdbqr.kicad_sym",+ "footprint": "ts5v330cdbqr.kicad_mod",+ "model_3d": "ts5v330cdbqr-hero.glb",+ "model_3d_plain": "ts5v330cdbqr.glb",+ "model_3d_step": "ts5v330cdbqr-etched.step",+ "model_3d_step_plain": "ts5v330cdbqr.step",+ "lbr": "ts5v330cdbqr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2865834",+ "digikey": "296-25417-2-ND",+ "mouser": "595-TS5V330CDBQR"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T01:44:03Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-25417-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TS5V330CDBQR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "IN",+ "type": "input",+ "description": "Select input that chooses S1 or S2 as the data path for the D port (low selects S1, high selects S2); VIH 2 V min, VIL 0.8 V max."+ },+ {+ "number": "2",+ "name": "S1A",+ "type": "bidirectional",+ "description": "Analog video I/O S1 for channel A, connected to DA when EN is low and IN is low."+ },+ {+ "number": "3",+ "name": "S2A",+ "type": "bidirectional",+ "description": "Analog video I/O S2 for channel A, connected to DA when EN is low and IN is high."+ },+ {+ "number": "4",+ "name": "DA",+ "type": "bidirectional",+ "description": "Analog video I/O D port of channel A, with analog voltage range 0 to VCC."+ },+ {+ "number": "5",+ "name": "S1B",+ "type": "bidirectional",+ "description": "Analog video I/O S1 for channel B, connected to DB when EN is low and IN is low."+ },+ {+ "number": "6",+ "name": "S2B",+ "type": "bidirectional",+ "description": "Analog video I/O S2 for channel B, connected to DB when EN is low and IN is high."+ },+ {+ "number": "7",+ "name": "DB",+ "type": "bidirectional",+ "description": "Analog video I/O D port of channel B, with analog voltage range 0 to VCC."+ },+ {+ "number": "8",+ "name": "GND",+ "type": "power_in",+ "description": "Ground."+ },+ {+ "number": "9",+ "name": "DC",+ "type": "bidirectional",+ "description": "Analog video I/O D port of channel C, with analog voltage range 0 to VCC."+ },+ {+ "number": "10",+ "name": "S2C",+ "type": "bidirectional",+ "description": "Analog video I/O S2 for channel C, connected to DC when EN is low and IN is high."+ },+ {+ "number": "11",+ "name": "S1C",+ "type": "bidirectional",+ "description": "Analog video I/O S1 for channel C, connected to DC when EN is low and IN is low."+ },+ {+ "number": "12",+ "name": "DD",+ "type": "bidirectional",+ "description": "Analog video I/O D port of channel D, with analog voltage range 0 to VCC."+ },+ {+ "number": "13",+ "name": "S2D",+ "type": "bidirectional",+ "description": "Analog video I/O S2 for channel D, connected to DD when EN is low and IN is high."+ },+ {+ "number": "14",+ "name": "S1D",+ "type": "bidirectional",+ "description": "Analog video I/O S1 for channel D, connected to DD when EN is low and IN is low."+ },+ {+ "number": "15",+ "name": "EN",+ "type": "input",+ "description": "Switch-enable input; low enables the switch, high gives a high-impedance state between D and S ports, and it should be tied to VCC through a pullup resistor to keep high impedance during power up or down."+ },+ {+ "number": "16",+ "name": "VCC",+ "type": "power_in",+ "description": "Supply voltage, 4.5 V to 5.5 V operating range in the features (recommended conditions table lists 4 V min to 5.5 V max)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The top-view pin numbers were recovered from scrambled text extraction of the page 1 diagram and the; The datasheet gives a supply range of 4.5 V to 5.5 V in the Features list, but 4 V to 5.5 V in Recom; Analog switch pins S1x, S2x and Dx are typed bidirectional because the datasheet describes bidirecti"+ ],+ "pages_sent": 22,+ "cost_usd": 0.0928,+ "at": "2026-10-08T01:43:43"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/ts5v330c",+ "pages": 22,+ "sha256": "8a253736c91e760b",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 16,+ "described": 16,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "ts5v330cdbqr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 7.8,+ 6.2,+ 2.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "d0e11e46aeca5dbaa5c4bb538f3f4899761267cabdeba6486325ae9e979c03ef",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ts5v330cdbqr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 7.8,+ 6.2,+ 2.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "aabcac808cc0cb9e980d0dc080be6a194a305f391c30a1cd98dca512b74c4a3e",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}