component
TS5V330CDBQR
Public Made by Adomby adom
Texas Instruments Analog Switches, Multiplexers, SSOP-16-150mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTS5V330CDBQR
Texas Instruments · Analog Switches, Multiplexers · SSOP-16-150mil
TS5V330CDBQR from Texas Instruments, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | input | Select input that chooses S1 or S2 as the data path for the D port (low selects S1, high selects S2); VIH 2 V min, VIL 0.8 V max. |
| 2 | S1A | bidirectional | Analog video I/O S1 for channel A, connected to DA when EN is low and IN is low. |
| 3 | S2A | bidirectional | Analog video I/O S2 for channel A, connected to DA when EN is low and IN is high. |
| 4 | DA | bidirectional | Analog video I/O D port of channel A, with analog voltage range 0 to VCC. |
| 5 | S1B | bidirectional | Analog video I/O S1 for channel B, connected to DB when EN is low and IN is low. |
| 6 | S2B | bidirectional | Analog video I/O S2 for channel B, connected to DB when EN is low and IN is high. |
| 7 | DB | bidirectional | Analog video I/O D port of channel B, with analog voltage range 0 to VCC. |
| 8 | GND | power_in | Ground. |
| 9 | DC | bidirectional | Analog video I/O D port of channel C, with analog voltage range 0 to VCC. |
| 10 | S2C | bidirectional | Analog video I/O S2 for channel C, connected to DC when EN is low and IN is high. |
| 11 | S1C | bidirectional | Analog video I/O S1 for channel C, connected to DC when EN is low and IN is low. |
| 12 | DD | bidirectional | Analog video I/O D port of channel D, with analog voltage range 0 to VCC. |
| 13 | S2D | bidirectional | Analog video I/O S2 for channel D, connected to DD when EN is low and IN is high. |
| 14 | S1D | bidirectional | Analog video I/O S1 for channel D, connected to DD when EN is low and IN is low. |
| 15 | EN | input | Switch-enable input; low enables the switch, high gives a high-impedance state between D and S ports, and it should be tied to VCC through a pullup resistor to keep high impedance during power up or down. |
| 16 | VCC | power_in | Supply voltage, 4.5 V to 5.5 V operating range in the features (recommended conditions table lists 4 V min to 5.5 V max). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-16-150mil |
| Category | Interface |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
TS5V330CDBQR - Footprint:
Package_SO:SSOP-16_5.3x6.2mm_P0.65mm - 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
- 3D model files:
ts5v330cdbqr-etched.step/ts5v330cdbqr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ts5v330cdbqr.step/ts5v330cdbqr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (22 pp, sha256
8a253736c91e760b, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).