component
TS5A3159MDBVREP
Public Made by Adomby adom
Texas Instruments Analog Switches, Multiplexers, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTS5A3159MDBVREP
Texas Instruments · Analog Switches, Multiplexers · SOT-23-6
TS5A3159MDBVREP from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NO | passive | Normally open analog terminal rated for analog voltages from 0 V to V+, with absolute limits of -0.5 V to V+ + 0.5 V (limited to 5.5 V maximum). |
| 2 | GND | power_in | Digital ground reference for all device voltages; continuous current through V+ or GND is limited to ±100 mA. |
| 3 | NC | unconnected | Normally closed analog terminal with the same 0 V to V+ analog range as NO and a ±200 mA on-state switch current limit. |
| 4 | COM | passive | Common analog terminal that connects to NC or NO depending on the IN logic level, with on-state switch current limited to ±200 mA. |
| 5 | V+ | power_in | Positive supply operating from 1.65 V to 5.5 V, with absolute maximum supply voltage range of -0.5 V to 6.5 V. |
| 6 | IN | input | Digital control input: low connects NC to COM and high connects NO to COM, with VIH minimum 2.4 V and VIL maximum 0.8 V at 5 V supply, and inputs are 5-V tolerant (6.5 V absolute maximum). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Interface |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | V+ | -0.5 | 6.5 | V | All voltages with respect to ground | 2 | |
| Analog voltage range | VNO, VCOM | -0.5 | V | Max printed as V+ + 0.5 V; limited to 5.5 V maximum | 2 | ||
| Analog port diode current | I/OK | -50 | 50 | mA | VNO, VCOM < 0 or VNO, VCOM > V+ | 2 | |
| On-state switch current | INO, ICOM | -200 | 200 | mA | VNO, VCOM = 0 to V+ | 2 | |
| On-state peak switch current | -400 | 400 | mA | Pulse at 1-ms duration < 10% duty cycle | 2 | ||
| Digital input voltage range | VIN | -0.5 | 6.5 | V | 2 | ||
| Digital input clamp current | IIK | -50 | mA | VIN < 0; single printed value | 2 | ||
| Continuous current through V+ or GND | -100 | 100 | mA | 2 | |||
| Package thermal impedance | θJA | 165 | °C/W | Per JESD 51-7 | 2 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 2 | ||
| Peak ON-state resistance | rpeak | 1 | 1.5 | Ω | V+ = 4.5 V; 0≤VNO/VNC≤V+, switch ON, ICOM = -30 mA; TA = 25°C | 3 | |
| Peak ON-state resistance | rpeak | 1.5 | Ω | V+ = 4.5 V; 0≤VNO/VNC≤V+, switch ON, ICOM = -30 mA; full temperature range | 3 | ||
| ON-state resistance | ron | 0.75 | 1.1 | Ω | V+ = 4.5 V; VNO/VNC = 2.5 V, switch ON, ICOM = -30 mA; TA = 25°C | 3 | |
| ON-state resistance | ron | 1.3 | Ω | V+ = 4.5 V; VNO/VNC = 2.5 V, switch ON, ICOM = -30 mA; full temperature range | 3 | ||
| ON-state resistance flatness | ron(flat) | 0.15 | 0.233 | Ω | V+ = 4.5 V; 0≤VNO/VNC≤V+, switch ON, ICOM = -30 mA; TA = 25°C | 3 | |
| OFF leakage current | INC(OFF), INO(OFF) | -6 | 0.2 | 4 | nA | V+ = 5.5 V; VNC/VNO = 4.5 V, switch OFF, VCOM = 0; TA = 25°C | 3 |
| OFF leakage current | INC(OFF), INO(OFF) | -20 | 60 | nA | V+ = 5.5 V; VNC/VNO = 4.5 V, switch OFF, VCOM = 0; full temperature range | 3 | |
| ON leakage current NC/NO | INC(ON), INO(ON) | -6 | 2.8 | 4 | nA | V+ = 5.5 V; VNC/VNO = 4.5 V, switch ON, VCOM = open; TA = 25°C | 3 |
| ON leakage current NC/NO | INC(ON), INO(ON) | -40 | 70 | nA | V+ = 5.5 V; VNC/VNO = 4.5 V, switch ON, VCOM = open; full temperature range | 3 | |
| ON leakage current COM | ICOM(ON) | -4 | 0.47 | 7 | nA | V+ = 5.5 V; VNC/VNO = 4.5 V or open, switch ON, VCOM = 4.5 V; TA = 25°C | 3 |
| ON leakage current COM | ICOM(ON) | -40 | 80 | nA | V+ = 5.5 V; VNC/VNO = 4.5 V or open, switch ON, VCOM = 4.5 V; full temperature range | 3 | |
| Input logic high | VIH | 2.4 | 5.5 | V | V+ = 4.5 V to 5.5 V; full temperature range | 3 | |
| Input logic low | VIL | 0 | 0.8 | V | V+ = 4.5 V to 5.5 V; full temperature range | 3 | |
| Input leakage current | IIH, IIL | -1 | 1 | µA | VI = 5.5 V or 0; full temperature range | 3 | |
| Turn-on time | tON | 20 | 35 | ns | V+ = 4.5 V to 5.5 V; COM = V+, CL = 35 pF, RL = 50 Ω; TA = 25°C | 4 | |
| Turn-on time | tON | 40 | ns | V+ = 4.5 V to 5.5 V; COM = V+, CL = 35 pF, RL = 50 Ω; full temperature range | 4 | ||
| Turn-off time | tOFF | 15 | 20 | ns | V+ = 4.5 V to 5.5 V; COM = V+, CL = 35 pF, RL = 50 Ω; TA = 25°C | 4 | |
| Turn-off time | tOFF | 35 | ns | V+ = 4.5 V to 5.5 V; COM = V+, CL = 35 pF, RL = 50 Ω; full temperature range | 4 | ||
| Break-before-make time | tBBM | 1 | 12 | 14.5 | ns | V+ = 4.5 V to 5.5 V; NC = VNO = V+/2, CL = 35 pF, RL = 50 Ω; TA = 25°C | 4 |
| Break-before-make time | tBBM | 1 | ns | V+ = 4.5 V to 5.5 V; NC = VNO = V+/2, CL = 35 pF, RL = 50 Ω; full temperature range | 4 | ||
| Positive supply current | I+ | 0.1 | µA | VIN = V+ or GND, switch ON or OFF; full temperature range | 4 | ||
| Peak ON-state resistance | rpeak | 1.35 | 2.15 | Ω | V+ = 3 V; 0≤VNO/VNC≤V+, switch ON, ICOM = -24 mA; TA = 25°C | 5 | |
| Peak ON-state resistance | rpeak | 2.15 | Ω | V+ = 3 V; 0≤VNO/VNC≤V+, switch ON, ICOM = -24 mA; full temperature range | 5 | ||
| ON-state resistance | ron | 1.15 | 1.7 | Ω | V+ = 3 V; VNO/VNC = 2 V, switch ON, ICOM = -24 mA; TA = 25°C | 5 | |
| ON-state resistance | ron | 1.7 | Ω | V+ = 3 V; VNO/VNC = 2 V, switch ON, ICOM = -24 mA; full temperature range | 5 | ||
| Input logic high | VIH | 2 | 5.5 | V | V+ = 3 V to 3.6 V; full temperature range | 5 | |
| Input logic low | VIL | 0 | 0.6 | V | V+ = 3 V to 3.6 V; full temperature range | 5 | |
| Turn-on time | tON | 30 | 40 | ns | V+ = 3 V to 3.6 V; COM = V+, CL = 35 pF, RL = 50 Ω; TA = 25°C | 6 | |
| Turn-on time | tON | 55 | ns | V+ = 3 V to 3.6 V; COM = V+, CL = 35 pF, RL = 50 Ω; full temperature range | 6 | ||
| Turn-off time | tOFF | 20 | 25 | ns | V+ = 3 V to 3.6 V; COM = V+, CL = 35 pF, RL = 50 Ω; TA = 25°C | 6 | |
| Turn-off time | tOFF | 40 | ns | V+ = 3 V to 3.6 V; COM = V+, CL = 35 pF, RL = 50 Ω; full temperature range | 6 | ||
| Peak ON-state resistance | rpeak | 1.7 | 2.7 | Ω | V+ = 2.5 V; 0≤VNO/VNC≤V+, switch ON, ICOM = -8 mA; TA = 25°C | 7 | |
| Peak ON-state resistance | rpeak | 2.9 | Ω | V+ = 2.5 V; 0≤VNO/VNC≤V+, switch ON, ICOM = -8 mA; full temperature range | 7 | ||
| ON-state resistance | ron | 1.45 | 2.3 | Ω | V+ = 2.5 V; VNO/VNC = 1.8 V, switch ON, ICOM = -8 mA; TA = 25°C | 7 | |
| ON-state resistance | ron | 2.5 | Ω | V+ = 2.5 V; VNO/VNC = 1.8 V, switch ON, ICOM = -8 mA; full temperature range | 7 | ||
| Input logic high | VIH | 1.8 | 5.5 | V | V+ = 2.3 V to 2.7 V; full temperature range | 7 | |
| Input logic low | VIL | 0 | 0.6 | V | V+ = 2.3 V to 2.7 V; full temperature range | 7 | |
| Turn-on time | tON | 40 | 55 | ns | V+ = 2.3 V to 2.7 V; COM = V+, CL = 35 pF, RL = 50 Ω; TA = 25°C | 8 | |
| Turn-on time | tON | 70 | ns | V+ = 2.3 V to 2.7 V; COM = V+, CL = 35 pF, RL = 50 Ω; full temperature range | 8 | ||
| Turn-off time | tOFF | 30 | 40 | ns | V+ = 2.3 V to 2.7 V; COM = V+, CL = 35 pF, RL = 50 Ω; TA = 25°C | 8 | |
| Turn-off time | tOFF | 55 | ns | V+ = 2.3 V to 2.7 V; COM = V+, CL = 35 pF, RL = 50 Ω; full temperature range | 8 | ||
| Peak ON-state resistance | rpeak | 4 | 4.9 | Ω | V+ = 1.8 V; 0≤VNO/VNC≤V+, switch ON, ICOM = -2 mA; TA = 25°C | 9 | |
| ON-state resistance | ron | 1.7 | 3.2 | Ω | V+ = 1.8 V; VNO/VNC = 1.5 V, switch ON, ICOM = -2 mA; TA = 25°C | 9 | |
| ON-state resistance | ron | 4.2 | Ω | V+ = 1.8 V; VNO/VNC = 1.5 V, switch ON, ICOM = -2 mA; full temperature range | 9 | ||
| Input logic high | VIH | 1.5 | 5.5 | V | V+ = 1.65 V to 1.95 V; full temperature range | 9 | |
| Input logic low | VIL | 0 | 0.6 | V | V+ = 1.65 V to 1.95 V; full temperature range | 9 | |
| Turn-on time | tON | 65 | 70 | ns | V+ = 1.65 V to 1.95 V; COM = V+, CL = 35 pF, RL = 50 Ω; TA = 25°C | 10 | |
| Turn-on time | tON | 95 | ns | V+ = 1.65 V to 1.95 V; COM = V+, CL = 35 pF, RL = 50 Ω; full temperature range | 10 | ||
| Turn-off time | tOFF | 40 | 55 | ns | V+ = 1.65 V to 1.95 V; COM = V+, CL = 35 pF, RL = 50 Ω; TA = 25°C | 10 | |
| Turn-off time | tOFF | 70 | ns | V+ = 1.65 V to 1.95 V; COM = V+, CL = 35 pF, RL = 50 Ω; full temperature range | 10 |
CAD (KiCad official)
- Symbol:
TS5A3159MDBVREP - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
ts5a3159mdbvrep-etched.step/ts5a3159mdbvrep-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ts5a3159mdbvrep.step/ts5a3159mdbvrep.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (27 pp, sha256
c8e8eb14dc666d5c, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).