component
TS3USB3200RSVR
Public Made by Adomby adom
Texas Instruments Analog Switches, Multiplexers, UQFN-16(1.8x2.6). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTS3USB3200RSVR
Texas Instruments · Analog Switches, Multiplexers · UQFN-16(1.8x2.6)
TS3USB3200RSVR from Texas Instruments, in a UQFN-16(1.8x2.6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference. |
| 2 | D+ | bidirectional | Data Signal Path differential positive, selectively routed to USB+ or MHL+ via SPDT switch based on SEL1/SEL2 configuration. |
| 3 | D- | bidirectional | Data Signal Path differential negative, selectively routed to USB- or MHL- via SPDT switch based on SEL1/SEL2 configuration. |
| 4 | PSEL | input | Power Source Select Line with 6-MΩ weak pulldown to GND; selects VCC (low) or VBUS (high) as device power source when both supplies are present. |
| 5 | SEL1 | input | Control Input Select Line 1 with 6-MΩ weak pulldown to GND, 1.8V compatible; determines D+/D- routing with SEL2. |
| 6 | USB- | bidirectional | USB Data Signal Path differential negative for USB 2.0 High-Speed (480 Mbps), 5.5GHz bandwidth, 4.6Ω typical Ron. |
| 7 | USB+ | bidirectional | USB Data Signal Path differential positive for USB 2.0 High-Speed (480 Mbps), 5.5GHz bandwidth, 4.6Ω typical Ron. |
| 8 | GND | power_in | Ground reference. |
| 9 | SEL2 | input | Control Input Select Line 2 with 6-MΩ weak pulldown to GND, 1.8V compatible; determines signal routing configuration with SEL1. |
| 10 | MHL- | bidirectional | MHL Data Signal Path differential negative for MHL/MyDP, 5.5GHz bandwidth, 5.7Ω typical Ron. |
| 11 | MHL+ | bidirectional | MHL Data Signal Path differential positive for MHL/MyDP, 5.5GHz bandwidth, 5.7Ω typical Ron. |
| 12 | ID_USB | bidirectional | ID Signal Path for USB identification, selectively routed to ID_COM based on SEL1/SEL2 configuration. |
| 13 | ID_MHL | bidirectional | ID Signal Path for MHL identification, selectively routed to ID_COM based on SEL1/SEL2 configuration. |
| 14 | ID_COM | bidirectional | ID Common Signal Path that connects to either ID_USB or ID_MHL based on SEL1/SEL2 configuration. |
| 15 | VBUS | power_in | Alternative Device Power pin, 4.3V to 5.5V supply range, selectable via PSEL when both VCC and VBUS are present. |
| 16 | VCC | power_in | Power supply pin, 2.7V to 4.3V supply range, primary power source with 40µA typical quiescent current. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | UQFN-16(1.8x2.6) |
| Category | Interface |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
TS3USB3200RSVR - Footprint:
Package_DFN_QFN:UQFN-16_1.8x2.6mm_P0.4mm - 3D model: UQFN-16(1.8x2.6), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.55 mm nominal UFQFPN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
ts3usb3200rsvr-etched.step/ts3usb3200rsvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ts3usb3200rsvr.step/ts3usb3200rsvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (24 pp, sha256
903b782724da86a1, retrieved 2026-10-01, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).