main
Ray
Publish 0.1.0
58e9beb
TS3USB221ARSER
Texas Instruments · Analog Switches - Special Purpose · UQFN-10(1.5x2)
TS3USB221ARSER from Texas Instruments, in a UQFN-10(1.5x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1D+ | bidirectional | USB port 1 positive differential data terminal, a bidirectional high-speed switch I/O. |
| 2 | 1D- | bidirectional | USB port 1 negative differential data terminal, a bidirectional high-speed switch I/O. |
| 3 | 2D+ | bidirectional | USB port 2 positive differential data terminal, a bidirectional high-speed switch I/O. |
| 4 | 2D- | bidirectional | USB port 2 negative differential data terminal, a bidirectional high-speed switch I/O. |
| 5 | GND | power_in | Ground reference for the device. |
| 6 | OE | input | Bus-switch enable input; the device enters low-power mode when OE is disabled. |
| 7 | D- | bidirectional | Common USB port negative differential data terminal, a bidirectional high-speed switch I/O. |
| 8 | D+ | bidirectional | Common USB port positive differential data terminal, a bidirectional high-speed switch I/O. |
| 9 | S | input | Select input that chooses between USB port 1 and USB port 2 for the common port. |
| 10 | VCC | power_in | Supply voltage pin, operating from 2.3 V to 3.6 V per the recommended operating conditions. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | UQFN-10(1.5x2) |
| Category | Interface |
| Pins | 10 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -0.5 | 4.6 | V | 4 | ||
| Control input voltage | VS, VOE | -0.5 | 7 | V | 4 | ||
| Switch I/O voltage | VI/O | -0.5 | 7 | V | 4 | ||
| Control input clamp current | IIK | -50 | mA | VIN < 0 | 4 | ||
| I/O port clamp current | II/OK | -50 | mA | VI/O < 0 | 4 | ||
| ON-state switch current | II/O | -120 | 120 | mA | 4 | ||
| Continuous current through VCC or GND | -100 | 100 | mA | 4 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| ESD human-body model, all pins except I/O to GND | V(ESD) | -7000 | 7000 | V | HBM per ANSI/ESDA/JEDEC JS-001, all pins except I/O to GND | 4 | |
| ESD human-body model, I/O to GND | V(ESD) | -12000 | 12000 | V | HBM per ANSI/ESDA/JEDEC JS-001, I/O to GND | 4 | |
| ESD charged-device model, all pins | V(ESD) | -1000 | 1000 | V | CDM per ANSI/ESDA/JEDEC JS-002, all pins | 4 | |
| Supply voltage | VCC | 2.3 | 3.6 | V | 4 | ||
| Data input/output voltage | VI/O | 0 | 5.5 | V | 4 | ||
| Operating free-air temperature | TA | -40 | 85 | °C | 4 | ||
| Low-level control input voltage | VS, VOE | 0 | V | VCC = 2.3V to 2.7V | 4 | ||
| Input-source clamp voltage | VIK | -1.8 | V | VCC = 3.6V, 2.7V, II = -18 mA | 5 | ||
| Input leakage current, control inputs | IIN | -1 | 1 | μA | VCC = 3.6V, 2.7V, 0V, VIN = 0V to 3.6V | 5 | |
| Off-state leakage current | IOZ | -1 | 1 | μA | VCC = 3.6V, 2.7V, VO = 0V to 5.25V, VI = 0V, VIN = VCC or GND, Switch OFF | 5 | |
| Power-off leakage current | I(OFF) | -2 | 2 | μA | VCC = 0V, VI/O = 0V to 5.25V | 5 | |
| Power-off leakage current | I(OFF) | -1 | 1 | μA | VCC = 0V, VI/O = 0V to 2.7V | 5 | |
| Supply current | ICC | 30 | μA | VCC = 3.6V, 2.7V, VIN = VCC or GND, II/O = 0V, Switch ON or OFF | 5 | ||
| Supply current (low power mode) | ICC | 1 | μA | VCC = 3.6V, 2.7V, VIN = VCC or GND, Switch disabled, OE in high state | 5 | ||
| Supply-current change, control inputs | ΔICC | 20 | μA | VCC = 3.6V, one input at 1.8V, other inputs at VCC or GND | 5 | ||
| Supply-current change, control inputs | ΔICC | 0.5 | μA | VCC = 2.7V, one input at 1.8V, other inputs at VCC or GND | 5 | ||
| Input capacitance, control inputs | Cin | 1.5 | 2.5 | pF | VCC = 3.3V, 2.5V, VIN = VCC or 0V | 5 | |
| OFF capacitance | Cio(OFF) | 3.5 | 5 | pF | VCC = 3.3V, 2.5V, VI/O = VCC or 0V, Switch OFF | 5 | |
| ON capacitance | Cio(ON) | 6 | 7.5 | pF | VCC = 3.3V, 2.5V, VI/O = VCC or 0V, Switch ON | 5 | |
| ON-state resistance | RON | 3 | 6 | Ω | VCC = 3V, 2.3V, VI = 0V, IO = 30mA | 5 | |
| ON-state resistance | RON | 3.4 | 6 | Ω | VCC = 3V, 2.3V, VI = 2.4V, IO = -15mA | 5 | |
| Junction-to-ambient thermal resistance | RθJA | 204.8 | °C/W | RSE (UQFN) 10 pins | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 118.1 | °C/W | RSE (UQFN) 10 pins | 5 | ||
| Junction-to-board thermal resistance | RθJB | 121.5 | °C/W | RSE (UQFN) 10 pins | 5 | ||
| Junction-to-top characterization parameter | ψJT | 13.9 | °C/W | RSE (UQFN) 10 pins | 5 | ||
| Junction-to-board characterization parameter | ψJB | 121.2 | °C/W | RSE (UQFN) 10 pins | 5 | ||
| Crosstalk | XTALK | -40 | dB | VCC = 3.3V ±10%, RL = 50, f = 250MHz | 6 | ||
| OFF isolation | OIRR | -41 | dB | VCC = 3.3V ±10%, RL = 50, f = 250MHz | 6 | ||
| Bandwidth (-3 dB) | BW | 0.9 | GHz | VCC = 3.3V ±10%, RL = 50 | 6 | ||
| Crosstalk | XTALK | -39 | dB | VCC = 2.5V ±10%, RL = 50, f = 250MHz | 6 | ||
| OFF isolation | OIRR | -40 | dB | VCC = 2.5V ±10%, RL = 50, f = 250MHz | 6 | ||
| Bandwidth (3 dB) | BW | 0.9 | GHz | VCC = 2.5V ±10%, RL = 50 | 6 | ||
| Propagation delay | tpd | 0.25 | ns | VCC = 3.3V ±10% | 6 | ||
| Line enable time, S to D, nD | tON | 30 | ns | VCC = 3.3V ±10%, S to D, nD | 6 | ||
| Line enable time, OE to D, nD | tON | 17 | ns | VCC = 3.3V ±10%, OE to D, nD | 6 | ||
| Line disable time, S to D, nD | tOFF | 12 | ns | VCC = 3.3V ±10%, S to D, nD | 6 | ||
| Line disable time, OE to D, nD | tOFF | 10 | ns | VCC = 3.3V ±10%, OE to D, nD | 6 | ||
| Output skew between center port to any other port | tSK(O) | 0.1 | 0.2 | ns | VCC = 3.3V ±10% | 6 | |
| Skew between opposite transitions of the same output | tSK(P) | 0.1 | 0.2 | ns | VCC = 3.3V ±10% | 6 | |
| Line enable time, S to D, nD | tON | 50 | ns | VCC = 2.5V ±10%, S to D, nD | 6 | ||
| Line enable time, OE to D, nD | tON | 32 | ns | VCC = 2.5V ±10%, OE to D, nD | 6 | ||
| Line disable time, S to D, nD | tOFF | 23 | ns | VCC = 2.5V ±10%, S to D, nD | 6 | ||
| Line disable time, OE to D, nD | tOFF | 12 | ns | VCC = 2.5V ±10%, OE to D, nD | 6 |
CAD (Adom-generated)
- Symbol:
TS3USB221ARSER - Footprint:
Adom_Gen:Texas_Instruments_TS3_b59872 - 3D model: generated to fit the land (STEP)
- 3D model files:
ts3usb221arser-etched.step/ts3usb221arser-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ts3usb221arser.step/ts3usb221arser.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (27 pp, sha256
cccebf8c10df6051, retrieved 2026-11-18) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.
# TS3USB221ARSER
**Texas Instruments** · Analog Switches - Special Purpose · UQFN-10(1.5x2)
TS3USB221ARSER from Texas Instruments, in a UQFN-10(1.5x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1D+ | bidirectional | USB port 1 positive differential data terminal, a bidirectional high-speed switch I/O. |
| 2 | 1D- | bidirectional | USB port 1 negative differential data terminal, a bidirectional high-speed switch I/O. |
| 3 | 2D+ | bidirectional | USB port 2 positive differential data terminal, a bidirectional high-speed switch I/O. |
| 4 | 2D- | bidirectional | USB port 2 negative differential data terminal, a bidirectional high-speed switch I/O. |
| 5 | GND | power_in | Ground reference for the device. |
| 6 | OE | input | Bus-switch enable input; the device enters low-power mode when OE is disabled. |
| 7 | D- | bidirectional | Common USB port negative differential data terminal, a bidirectional high-speed switch I/O. |
| 8 | D+ | bidirectional | Common USB port positive differential data terminal, a bidirectional high-speed switch I/O. |
| 9 | S | input | Select input that chooses between USB port 1 and USB port 2 for the common port. |
| 10 | VCC | power_in | Supply voltage pin, operating from 2.3 V to 3.6 V per the recommended operating conditions. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | UQFN-10(1.5x2) |
| Category | Interface |
| Pins | 10 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -0.5 | | 4.6 | V | | 4 |
| Control input voltage | VS, VOE | -0.5 | | 7 | V | | 4 |
| Switch I/O voltage | VI/O | -0.5 | | 7 | V | | 4 |
| Control input clamp current | IIK | | | -50 | mA | VIN < 0 | 4 |
| I/O port clamp current | II/OK | | | -50 | mA | VI/O < 0 | 4 |
| ON-state switch current | II/O | -120 | | 120 | mA | | 4 |
| Continuous current through VCC or GND | | -100 | | 100 | mA | | 4 |
| Storage temperature range | Tstg | -65 | | 150 | °C | | 4 |
| ESD human-body model, all pins except I/O to GND | V(ESD) | -7000 | | 7000 | V | HBM per ANSI/ESDA/JEDEC JS-001, all pins except I/O to GND | 4 |
| ESD human-body model, I/O to GND | V(ESD) | -12000 | | 12000 | V | HBM per ANSI/ESDA/JEDEC JS-001, I/O to GND | 4 |
| ESD charged-device model, all pins | V(ESD) | -1000 | | 1000 | V | CDM per ANSI/ESDA/JEDEC JS-002, all pins | 4 |
| Supply voltage | VCC | 2.3 | | 3.6 | V | | 4 |
| Data input/output voltage | VI/O | 0 | | 5.5 | V | | 4 |
| Operating free-air temperature | TA | -40 | | 85 | °C | | 4 |
| Low-level control input voltage | VS, VOE | 0 | | | V | VCC = 2.3V to 2.7V | 4 |
| Input-source clamp voltage | VIK | -1.8 | | | V | VCC = 3.6V, 2.7V, II = -18 mA | 5 |
| Input leakage current, control inputs | IIN | -1 | | 1 | μA | VCC = 3.6V, 2.7V, 0V, VIN = 0V to 3.6V | 5 |
| Off-state leakage current | IOZ | -1 | | 1 | μA | VCC = 3.6V, 2.7V, VO = 0V to 5.25V, VI = 0V, VIN = VCC or GND, Switch OFF | 5 |
| Power-off leakage current | I(OFF) | -2 | | 2 | μA | VCC = 0V, VI/O = 0V to 5.25V | 5 |
| Power-off leakage current | I(OFF) | -1 | | 1 | μA | VCC = 0V, VI/O = 0V to 2.7V | 5 |
| Supply current | ICC | | | 30 | μA | VCC = 3.6V, 2.7V, VIN = VCC or GND, II/O = 0V, Switch ON or OFF | 5 |
| Supply current (low power mode) | ICC | | | 1 | μA | VCC = 3.6V, 2.7V, VIN = VCC or GND, Switch disabled, OE in high state | 5 |
| Supply-current change, control inputs | ΔICC | | | 20 | μA | VCC = 3.6V, one input at 1.8V, other inputs at VCC or GND | 5 |
| Supply-current change, control inputs | ΔICC | | | 0.5 | μA | VCC = 2.7V, one input at 1.8V, other inputs at VCC or GND | 5 |
| Input capacitance, control inputs | Cin | | 1.5 | 2.5 | pF | VCC = 3.3V, 2.5V, VIN = VCC or 0V | 5 |
| OFF capacitance | Cio(OFF) | | 3.5 | 5 | pF | VCC = 3.3V, 2.5V, VI/O = VCC or 0V, Switch OFF | 5 |
| ON capacitance | Cio(ON) | | 6 | 7.5 | pF | VCC = 3.3V, 2.5V, VI/O = VCC or 0V, Switch ON | 5 |
| ON-state resistance | RON | | 3 | 6 | Ω | VCC = 3V, 2.3V, VI = 0V, IO = 30mA | 5 |
| ON-state resistance | RON | | 3.4 | 6 | Ω | VCC = 3V, 2.3V, VI = 2.4V, IO = -15mA | 5 |
| Junction-to-ambient thermal resistance | RθJA | | 204.8 | | °C/W | RSE (UQFN) 10 pins | 5 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 118.1 | | °C/W | RSE (UQFN) 10 pins | 5 |
| Junction-to-board thermal resistance | RθJB | | 121.5 | | °C/W | RSE (UQFN) 10 pins | 5 |
| Junction-to-top characterization parameter | ψJT | | 13.9 | | °C/W | RSE (UQFN) 10 pins | 5 |
| Junction-to-board characterization parameter | ψJB | | 121.2 | | °C/W | RSE (UQFN) 10 pins | 5 |
| Crosstalk | XTALK | | -40 | | dB | VCC = 3.3V ±10%, RL = 50, f = 250MHz | 6 |
| OFF isolation | OIRR | | -41 | | dB | VCC = 3.3V ±10%, RL = 50, f = 250MHz | 6 |
| Bandwidth (-3 dB) | BW | | 0.9 | | GHz | VCC = 3.3V ±10%, RL = 50 | 6 |
| Crosstalk | XTALK | | -39 | | dB | VCC = 2.5V ±10%, RL = 50, f = 250MHz | 6 |
| OFF isolation | OIRR | | -40 | | dB | VCC = 2.5V ±10%, RL = 50, f = 250MHz | 6 |
| Bandwidth (3 dB) | BW | | 0.9 | | GHz | VCC = 2.5V ±10%, RL = 50 | 6 |
| Propagation delay | tpd | | 0.25 | | ns | VCC = 3.3V ±10% | 6 |
| Line enable time, S to D, nD | tON | | 30 | | ns | VCC = 3.3V ±10%, S to D, nD | 6 |
| Line enable time, OE to D, nD | tON | | 17 | | ns | VCC = 3.3V ±10%, OE to D, nD | 6 |
| Line disable time, S to D, nD | tOFF | | 12 | | ns | VCC = 3.3V ±10%, S to D, nD | 6 |
| Line disable time, OE to D, nD | tOFF | | 10 | | ns | VCC = 3.3V ±10%, OE to D, nD | 6 |
| Output skew between center port to any other port | tSK(O) | | 0.1 | 0.2 | ns | VCC = 3.3V ±10% | 6 |
| Skew between opposite transitions of the same output | tSK(P) | | 0.1 | 0.2 | ns | VCC = 3.3V ±10% | 6 |
| Line enable time, S to D, nD | tON | | 50 | | ns | VCC = 2.5V ±10%, S to D, nD | 6 |
| Line enable time, OE to D, nD | tON | | 32 | | ns | VCC = 2.5V ±10%, OE to D, nD | 6 |
| Line disable time, S to D, nD | tOFF | | 23 | | ns | VCC = 2.5V ±10%, S to D, nD | 6 |
| Line disable time, OE to D, nD | tOFF | | 12 | | ns | VCC = 2.5V ±10%, OE to D, nD | 6 |
## CAD (Adom-generated)
- Symbol: `TS3USB221ARSER`
- Footprint: `Adom_Gen:Texas_Instruments_TS3_b59872`
- 3D model: generated to fit the land (STEP)
- 3D model files: `ts3usb221arser-etched.step` / `ts3usb221arser-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ts3usb221arser.step` / `ts3usb221arser.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/ts3usb221a.pdf) (27 pp, sha256 `cccebf8c10df6051`, retrieved 2026-11-18)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.
[Datasheet PDF](docs/ts3usb221arser-datasheet.pdf)