component
TS3702IDT
Public Made by Adomby adom
STMicroelectronics Comparators, SO-8. Pinout reviewed by a person against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTS3702IDT
STMicroelectronics · Comparators · SO-8
TS3702IDT from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Inverting Input 2 | input | Inverting (negative) input of the second comparator; operates within common-mode input voltage range of 0 to VCC+-1.5V with 1pA typical input bias current. |
| 2 | Output 2 | output | Push-pull CMOS output of the second comparator; requires no external pull-up resistor with VOH minimum 4.3V and VOL maximum 375mV at 5V supply. |
| 3 | Non-inverting Input 2 | input | Non-inverting (positive) input of the second comparator; operates within common-mode input voltage range of 0 to VCC+-1.5V with 1pA typical input bias current. |
| 4 | V- | power_in | Negative supply voltage terminal (ground for single supply operation); device supports single supply 2.7V to 16V or dual supplies ±1.35V to ±8V. |
| 5 | Inverting Input 1 | input | Inverting (negative) input of the first comparator; operates within common-mode input voltage range of 0 to VCC+-1.5V with 1pA typical input bias current. |
| 6 | Non-inverting Input 1 | input | Non-inverting (positive) input of the first comparator; operates within common-mode input voltage range of 0 to VCC+-1.5V with 1pA typical input bias current. |
| 7 | Output 1 | output | Push-pull CMOS output of the first comparator; requires no external pull-up resistor with VOH minimum 4.3V and VOL maximum 375mV at 5V supply. |
| 8 | VCC+ | power_in | Positive supply voltage terminal; device supports single supply 2.7V to 16V or dual supplies ±1.35V to ±8V with typical quiescent current of 9μA per comparator. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
TS3702IDT - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
ts3702idt-etched.step/ts3702idt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ts3702idt.step/ts3702idt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (11 pp, sha256
5872e93da1c1d847, retrieved 2026-09-29, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).