main
Ray
ts331ilt: specified limits as data (metadata.characteristics, 60 rows from the datasheet)
53ddf52
TS331ILT
STMicroelectronics · Comparators · SOT-23-5
TS331ILT from STMicroelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Open-drain output; output saturation voltage VOL = 30 mV max at ISINK = 1 mA (VCC+ = 1.8 V), output leakage current IOH = 10 nA max at VOUT = VCC+; maximum sink current ISINK = 20 mA typ at VOUT = 1.5 V (VCC+ = 1.8 V). |
| 2 | VCC- | power_in | Negative supply rail / ground reference; supply differential (VCC+) − (VCC−) must be 1.6 V to 5.0 V; all voltage values in the datasheet are referenced to this pin. |
| 3 | IN+ | input | Non-inverting comparator input; rail-to-rail common-mode range (VCC−) − 0.2 V to (VCC+) + 0.2 V at 25 °C, (VCC−) to (VCC+) over full temperature range; input bias current 40 nA max at 25 °C. |
| 4 | IN- | input | Inverting comparator input; rail-to-rail common-mode range (VCC−) − 0.2 V to (VCC+) + 0.2 V at 25 °C, (VCC−) to (VCC+) over full temperature range; input offset voltage VIO = 5 mV max at 25 °C. |
| 5 | VCC+ | power_in | Positive supply; operating range 1.6 V to 5.0 V; quiescent supply current ICC = 26 μA max (no load, output low, VCC+ = 1.8 V, 25 °C), 30 μA max over −40 °C to +125 °C. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VIO | 0.5 | 5 | mV | VCC+ = +1.8 V, VCC- = 0 V, Tamb = +25°C | 6 | |
| Input offset voltage over temperature | VIO | 6 | mV | VCC+ = +1.8 V, VCC- = 0 V, -40 °C < Tamb < +125 °C | 6 | ||
| Input offset voltage drift | ΔVio/ΔT | 4.5 | μV/°C | VCC+ = +1.8 V, VCC- = 0 V, -40 °C < Tamb < +125 °C | 6 | ||
| Input bias current | IIB | 25 | 40 | nA | VCC+ = +1.8 V, VCC- = 0 V, Tamb = +25°C | 6 | |
| Input bias current over temperature | IIB | 100 | nA | VCC+ = +1.8 V, VCC- = 0 V, -40 °C < Tamb < +125 °C | 6 | ||
| Input offset current | IIO | 1 | 10 | nA | VCC+ = +1.8 V, VCC- = 0 V, Tamb = +25°C | 6 | |
| Input offset current over temperature | IIO | 100 | nA | VCC+ = +1.8 V, VCC- = 0 V, -40 °C < Tamb < +125 °C | 6 | ||
| Supply current, output low | ICC | 20 | 26 | μA | VCC+ = +1.8 V, VCC- = 0 V; No load, output low, VICM = 0 V; Tamb = +25°C | 6 | |
| Supply current, output low, over temperature | ICC | 30 | μA | VCC+ = +1.8 V, VCC- = 0 V; No load, output low, VICM = 0 V; -40 °C < Tamb < +125 °C | 6 | ||
| Supply current, output high | ICC | 22 | 29 | μA | VCC+ = +1.8 V, VCC- = 0 V; No load, output high, VICM = 0 V; Tamb = +25°C | 6 | |
| Supply current, output high, over temperature | ICC | 33 | μA | VCC+ = +1.8 V, VCC- = 0 V; No load, output high, VICM = 0 V; -40 °C < Tamb < +125 °C | 6 | ||
| Output current leakage | IOH | 1 | 10 | nA | VCC+ = +1.8 V, VCC- = 0 V; VOUT = VCC+; Tamb = +25°C | 6 | |
| Output current leakage over temperature | IOH | 500 | nA | VCC+ = +1.8 V, VCC- = 0 V; VOUT = VCC+; -40 °C < Tamb < +125 °C | 6 | ||
| Output voltage low | VOL | 24 | 30 | mV | VCC+ = +1.8 V, VCC- = 0 V; ISINK = 1 mA; Tamb = +25°C | 6 | |
| Output voltage low over temperature | VOL | 50 | mV | VCC+ = +1.8 V, VCC- = 0 V; ISINK = 1 mA; -40 °C < Tamb < +125 °C | 6 | ||
| Output sink current | ISINK | 20 | 22 | mA | VCC+ = +1.8 V, VCC- = 0 V; VOUT = 1.5 V; Tamb = +25°C | 6 | |
| Output sink current over temperature | ISINK | 15 | mA | VCC+ = +1.8 V, VCC- = 0 V; VOUT = 1.5 V; -40 °C < Tamb < +125 °C | 6 | ||
| Common mode rejection ratio | CMRR | 50 | 68 | dB | VCC+ = +1.8 V, VCC- = 0 V; 0 < VICM < 1.8 V | 6 | |
| Propagation delay high to low, 10 mV overdrive | TPHL | 300 | ns | VICM = 0 V, RL = 5.1 kΩ, CL = 50 pF, overdrive = 10 mV; VCC+ = +1.8 V | 6 | ||
| Propagation delay high to low, 100 mV overdrive | TPHL | 210 | 310 | ns | VICM = 0 V, RL = 5.1 kΩ, CL = 50 pF, overdrive = 100 mV; VCC+ = +1.8 V | 6 | |
| Propagation delay low to high, 10 mV overdrive | TPLH | 540 | ns | VICM = 0 V, RL = 5.1 kΩ, CL = 50 pF, overdrive = 10 mV; VCC+ = +1.8 V | 6 | ||
| Propagation delay low to high, 100 mV overdrive | TPLH | 420 | 620 | ns | VICM = 0 V, RL = 5.1 kΩ, CL = 50 pF, overdrive = 100 mV; VCC+ = +1.8 V | 6 | |
| Input offset voltage | VIO | 0.5 | 5 | mV | VCC+ = +5 V, VCC- = 0 V, Tamb = +25°C | 8 | |
| Input offset voltage over temperature | VIO | 6 | mV | VCC+ = +5 V, VCC- = 0 V, -40 °C < Tamb < +125 °C | 8 | ||
| Input offset voltage drift | ΔVio/ΔT | 1.3 | μV/°C | VCC+ = +5 V, VCC- = 0 V, -40 °C < Tamb < +125 °C | 8 | ||
| Input bias current | IIB | 30 | 40 | nA | VCC+ = +5 V, VCC- = 0 V, Tamb = +25°C | 8 | |
| Input bias current over temperature | IIB | 100 | nA | VCC+ = +5 V, VCC- = 0 V, -40 °C < Tamb < +125 °C | 8 | ||
| Input offset current | IIO | 1 | 10 | nA | VCC+ = +5 V, VCC- = 0 V, Tamb = +25°C | 8 | |
| Input offset current over temperature | IIO | 100 | nA | VCC+ = +5 V, VCC- = 0 V, -40 °C < Tamb < +125 °C | 8 | ||
| Supply current, output low | ICC | 23 | 30 | μA | VCC+ = +5 V, VCC- = 0 V; No load, output low, VICM = 0 V; Tamb = +25°C | 8 | |
| Supply current, output low, over temperature | ICC | 34 | μA | VCC+ = +5 V, VCC- = 0 V; No load, output low, VICM = 0 V; -40 °C < Tamb < +125 °C | 8 | ||
| Supply current, output high | ICC | 26 | 34 | μA | VCC+ = +5 V, VCC- = 0 V; No load, output high, VICM = 0 V; Tamb = +25°C | 8 | |
| Supply current, output high, over temperature | ICC | 38 | μA | VCC+ = +5 V, VCC- = 0 V; No load, output high, VICM = 0 V; -40 °C < Tamb < +125 °C | 8 | ||
| Output current leakage | IOH | 1 | 10 | nA | VCC+ = +5 V, VCC- = 0 V; VOUT = VCC+; Tamb = +25°C | 8 | |
| Output current leakage over temperature | IOH | 600 | nA | VCC+ = +5 V, VCC- = 0 V; VOUT = VCC+; -40 °C < Tamb < +125 °C | 8 | ||
| Output voltage low | VOL | 48 | 60 | mV | VCC+ = +5 V, VCC- = 0 V; ISINK = 4 mA; Tamb = +25°C | 8 | |
| Output voltage low over temperature | VOL | 80 | mV | VCC+ = +5 V, VCC- = 0 V; ISINK = 4 mA; -40 °C < Tamb < +125 °C | 8 | ||
| Output sink current | ISINK | 82 | 93 | mA | VCC+ = +5 V, VCC- = 0 V; VOUT = 1.5 V; Tamb = +25°C | 8 | |
| Output sink current over temperature | ISINK | 60 | mA | VCC+ = +5 V, VCC- = 0 V; VOUT = 1.5 V; -40 °C < Tamb < +125 °C | 8 | ||
| Voltage gain | AV | 40 | 100 | V/mV | VCC+ = +5 V, VCC- = 0 V | 8 | |
| Common mode rejection ratio | CMRR | 60 | 79 | dB | VCC+ = +5 V, VCC- = 0 V; 0 < VICM < 5 V; Tamb = +25°C | 8 | |
| Common mode rejection ratio over temperature | CMRR | 58 | dB | VCC+ = +5 V, VCC- = 0 V; 0 < VICM < 5 V; -40 °C < Tamb < +125 °C | 8 | ||
| Supply voltage rejection | SVR | 56 | 75 | dB | VCC+ = +5 V, VCC- = 0 V; ΔVCC = 1.8 to 5 V; Tamb = +25°C | 8 | |
| Supply voltage rejection over temperature | SVR | 56 | dB | VCC+ = +5 V, VCC- = 0 V; ΔVCC = 1.8 to 5 V; -40 °C < Tamb < +125 °C | 8 | ||
| Propagation delay high to low, 10 mV overdrive | TPHL | 380 | ns | VICM = 0 V, RL = 5.1 kΩ, CL = 50 pF, overdrive = 10 mV; VCC+ = +5 V | 8 | ||
| Propagation delay high to low, 100 mV overdrive | TPHL | 270 | 430 | ns | VICM = 0 V, RL = 5.1 kΩ, CL = 50 pF, overdrive = 100 mV; VCC+ = +5 V | 8 | |
| Propagation delay low to high, 10 mV overdrive | TPLH | 570 | ns | VICM = 0 V, RL = 5.1 kΩ, CL = 50 pF, overdrive = 10 mV; VCC+ = +5 V | 8 | ||
| Propagation delay low to high, 100 mV overdrive | TPLH | 450 | 720 | ns | VICM = 0 V, RL = 5.1 kΩ, CL = 50 pF, overdrive = 100 mV; VCC+ = +5 V | 8 | |
| Supply voltage | VCC | 5.5 | V | 4 | |||
| Differential input voltage | VID | -5.5 | 5.5 | V | 4 | ||
| Output voltage | Vout | 5.5 | V | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Junction temperature | Tj | 150 | °C | 4 | |||
| ESD human body model | 2000 | V | HBM, JESD22-A114F | 4 | |||
| ESD machine model | 200 | V | MM, JESD22-A115A | 4 | |||
| ESD charged device model | 1500 | V | CDM, ANSI/ESD STM5.3.1 | 4 | |||
| Operating temperature range | Toper | -40 | 125 | °C | 5 | ||
| Supply voltage (VCC+ - VCC-) | VCC | 1.6 | 5 | V | -40°C < Tamb < +125°C | 5 | |
| Thermal resistance junction to ambient, SOT23-5 | Rthja | 250 | °C/W | SOT23-5 package; values stated as typical | 4 | ||
| Thermal resistance junction to case, SOT23-5 | Rthjc | 81 | °C/W | SOT23-5 package | 4 |
CAD (KiCad official)
- Symbol:
TS331ILT - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
ts331ilt-etched.step/ts331ilt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ts331ilt.step/ts331ilt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (27 pp, sha256
0619a5861cfbab12, retrieved 2026-09-26, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TS331ILT
**STMicroelectronics** · Comparators · SOT-23-5
TS331ILT from STMicroelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Open-drain output; output saturation voltage VOL = 30 mV max at ISINK = 1 mA (VCC+ = 1.8 V), output leakage current IOH = 10 nA max at VOUT = VCC+; maximum sink current ISINK = 20 mA typ at VOUT = 1.5 V (VCC+ = 1.8 V). |
| 2 | VCC- | power_in | Negative supply rail / ground reference; supply differential (VCC+) − (VCC−) must be 1.6 V to 5.0 V; all voltage values in the datasheet are referenced to this pin. |
| 3 | IN+ | input | Non-inverting comparator input; rail-to-rail common-mode range (VCC−) − 0.2 V to (VCC+) + 0.2 V at 25 °C, (VCC−) to (VCC+) over full temperature range; input bias current 40 nA max at 25 °C. |
| 4 | IN- | input | Inverting comparator input; rail-to-rail common-mode range (VCC−) − 0.2 V to (VCC+) + 0.2 V at 25 °C, (VCC−) to (VCC+) over full temperature range; input offset voltage VIO = 5 mV max at 25 °C. |
| 5 | VCC+ | power_in | Positive supply; operating range 1.6 V to 5.0 V; quiescent supply current ICC = 26 μA max (no load, output low, VCC+ = 1.8 V, 25 °C), 30 μA max over −40 °C to +125 °C. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VIO | | 0.5 | 5 | mV | VCC+ = +1.8 V, VCC- = 0 V, Tamb = +25°C | 6 |
| Input offset voltage over temperature | VIO | | | 6 | mV | VCC+ = +1.8 V, VCC- = 0 V, -40 °C < Tamb < +125 °C | 6 |
| Input offset voltage drift | ΔVio/ΔT | | | 4.5 | μV/°C | VCC+ = +1.8 V, VCC- = 0 V, -40 °C < Tamb < +125 °C | 6 |
| Input bias current | IIB | | 25 | 40 | nA | VCC+ = +1.8 V, VCC- = 0 V, Tamb = +25°C | 6 |
| Input bias current over temperature | IIB | | | 100 | nA | VCC+ = +1.8 V, VCC- = 0 V, -40 °C < Tamb < +125 °C | 6 |
| Input offset current | IIO | | 1 | 10 | nA | VCC+ = +1.8 V, VCC- = 0 V, Tamb = +25°C | 6 |
| Input offset current over temperature | IIO | | | 100 | nA | VCC+ = +1.8 V, VCC- = 0 V, -40 °C < Tamb < +125 °C | 6 |
| Supply current, output low | ICC | | 20 | 26 | μA | VCC+ = +1.8 V, VCC- = 0 V; No load, output low, VICM = 0 V; Tamb = +25°C | 6 |
| Supply current, output low, over temperature | ICC | | | 30 | μA | VCC+ = +1.8 V, VCC- = 0 V; No load, output low, VICM = 0 V; -40 °C < Tamb < +125 °C | 6 |
| Supply current, output high | ICC | | 22 | 29 | μA | VCC+ = +1.8 V, VCC- = 0 V; No load, output high, VICM = 0 V; Tamb = +25°C | 6 |
| Supply current, output high, over temperature | ICC | | | 33 | μA | VCC+ = +1.8 V, VCC- = 0 V; No load, output high, VICM = 0 V; -40 °C < Tamb < +125 °C | 6 |
| Output current leakage | IOH | | 1 | 10 | nA | VCC+ = +1.8 V, VCC- = 0 V; VOUT = VCC+; Tamb = +25°C | 6 |
| Output current leakage over temperature | IOH | | | 500 | nA | VCC+ = +1.8 V, VCC- = 0 V; VOUT = VCC+; -40 °C < Tamb < +125 °C | 6 |
| Output voltage low | VOL | | 24 | 30 | mV | VCC+ = +1.8 V, VCC- = 0 V; ISINK = 1 mA; Tamb = +25°C | 6 |
| Output voltage low over temperature | VOL | | | 50 | mV | VCC+ = +1.8 V, VCC- = 0 V; ISINK = 1 mA; -40 °C < Tamb < +125 °C | 6 |
| Output sink current | ISINK | 20 | 22 | | mA | VCC+ = +1.8 V, VCC- = 0 V; VOUT = 1.5 V; Tamb = +25°C | 6 |
| Output sink current over temperature | ISINK | 15 | | | mA | VCC+ = +1.8 V, VCC- = 0 V; VOUT = 1.5 V; -40 °C < Tamb < +125 °C | 6 |
| Common mode rejection ratio | CMRR | 50 | 68 | | dB | VCC+ = +1.8 V, VCC- = 0 V; 0 < VICM < 1.8 V | 6 |
| Propagation delay high to low, 10 mV overdrive | TPHL | | | 300 | ns | VICM = 0 V, RL = 5.1 kΩ, CL = 50 pF, overdrive = 10 mV; VCC+ = +1.8 V | 6 |
| Propagation delay high to low, 100 mV overdrive | TPHL | | 210 | 310 | ns | VICM = 0 V, RL = 5.1 kΩ, CL = 50 pF, overdrive = 100 mV; VCC+ = +1.8 V | 6 |
| Propagation delay low to high, 10 mV overdrive | TPLH | | | 540 | ns | VICM = 0 V, RL = 5.1 kΩ, CL = 50 pF, overdrive = 10 mV; VCC+ = +1.8 V | 6 |
| Propagation delay low to high, 100 mV overdrive | TPLH | | 420 | 620 | ns | VICM = 0 V, RL = 5.1 kΩ, CL = 50 pF, overdrive = 100 mV; VCC+ = +1.8 V | 6 |
| Input offset voltage | VIO | | 0.5 | 5 | mV | VCC+ = +5 V, VCC- = 0 V, Tamb = +25°C | 8 |
| Input offset voltage over temperature | VIO | | | 6 | mV | VCC+ = +5 V, VCC- = 0 V, -40 °C < Tamb < +125 °C | 8 |
| Input offset voltage drift | ΔVio/ΔT | | | 1.3 | μV/°C | VCC+ = +5 V, VCC- = 0 V, -40 °C < Tamb < +125 °C | 8 |
| Input bias current | IIB | | 30 | 40 | nA | VCC+ = +5 V, VCC- = 0 V, Tamb = +25°C | 8 |
| Input bias current over temperature | IIB | | | 100 | nA | VCC+ = +5 V, VCC- = 0 V, -40 °C < Tamb < +125 °C | 8 |
| Input offset current | IIO | | 1 | 10 | nA | VCC+ = +5 V, VCC- = 0 V, Tamb = +25°C | 8 |
| Input offset current over temperature | IIO | | | 100 | nA | VCC+ = +5 V, VCC- = 0 V, -40 °C < Tamb < +125 °C | 8 |
| Supply current, output low | ICC | | 23 | 30 | μA | VCC+ = +5 V, VCC- = 0 V; No load, output low, VICM = 0 V; Tamb = +25°C | 8 |
| Supply current, output low, over temperature | ICC | | | 34 | μA | VCC+ = +5 V, VCC- = 0 V; No load, output low, VICM = 0 V; -40 °C < Tamb < +125 °C | 8 |
| Supply current, output high | ICC | | 26 | 34 | μA | VCC+ = +5 V, VCC- = 0 V; No load, output high, VICM = 0 V; Tamb = +25°C | 8 |
| Supply current, output high, over temperature | ICC | | | 38 | μA | VCC+ = +5 V, VCC- = 0 V; No load, output high, VICM = 0 V; -40 °C < Tamb < +125 °C | 8 |
| Output current leakage | IOH | | 1 | 10 | nA | VCC+ = +5 V, VCC- = 0 V; VOUT = VCC+; Tamb = +25°C | 8 |
| Output current leakage over temperature | IOH | | | 600 | nA | VCC+ = +5 V, VCC- = 0 V; VOUT = VCC+; -40 °C < Tamb < +125 °C | 8 |
| Output voltage low | VOL | | 48 | 60 | mV | VCC+ = +5 V, VCC- = 0 V; ISINK = 4 mA; Tamb = +25°C | 8 |
| Output voltage low over temperature | VOL | | | 80 | mV | VCC+ = +5 V, VCC- = 0 V; ISINK = 4 mA; -40 °C < Tamb < +125 °C | 8 |
| Output sink current | ISINK | 82 | 93 | | mA | VCC+ = +5 V, VCC- = 0 V; VOUT = 1.5 V; Tamb = +25°C | 8 |
| Output sink current over temperature | ISINK | 60 | | | mA | VCC+ = +5 V, VCC- = 0 V; VOUT = 1.5 V; -40 °C < Tamb < +125 °C | 8 |
| Voltage gain | AV | 40 | 100 | | V/mV | VCC+ = +5 V, VCC- = 0 V | 8 |
| Common mode rejection ratio | CMRR | 60 | 79 | | dB | VCC+ = +5 V, VCC- = 0 V; 0 < VICM < 5 V; Tamb = +25°C | 8 |
| Common mode rejection ratio over temperature | CMRR | 58 | | | dB | VCC+ = +5 V, VCC- = 0 V; 0 < VICM < 5 V; -40 °C < Tamb < +125 °C | 8 |
| Supply voltage rejection | SVR | 56 | 75 | | dB | VCC+ = +5 V, VCC- = 0 V; ΔVCC = 1.8 to 5 V; Tamb = +25°C | 8 |
| Supply voltage rejection over temperature | SVR | 56 | | | dB | VCC+ = +5 V, VCC- = 0 V; ΔVCC = 1.8 to 5 V; -40 °C < Tamb < +125 °C | 8 |
| Propagation delay high to low, 10 mV overdrive | TPHL | | | 380 | ns | VICM = 0 V, RL = 5.1 kΩ, CL = 50 pF, overdrive = 10 mV; VCC+ = +5 V | 8 |
| Propagation delay high to low, 100 mV overdrive | TPHL | | 270 | 430 | ns | VICM = 0 V, RL = 5.1 kΩ, CL = 50 pF, overdrive = 100 mV; VCC+ = +5 V | 8 |
| Propagation delay low to high, 10 mV overdrive | TPLH | | | 570 | ns | VICM = 0 V, RL = 5.1 kΩ, CL = 50 pF, overdrive = 10 mV; VCC+ = +5 V | 8 |
| Propagation delay low to high, 100 mV overdrive | TPLH | | 450 | 720 | ns | VICM = 0 V, RL = 5.1 kΩ, CL = 50 pF, overdrive = 100 mV; VCC+ = +5 V | 8 |
| Supply voltage | VCC | | | 5.5 | V | | 4 |
| Differential input voltage | VID | -5.5 | | 5.5 | V | | 4 |
| Output voltage | Vout | | | 5.5 | V | | 4 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |
| Junction temperature | Tj | | | 150 | °C | | 4 |
| ESD human body model | | | | 2000 | V | HBM, JESD22-A114F | 4 |
| ESD machine model | | | | 200 | V | MM, JESD22-A115A | 4 |
| ESD charged device model | | | | 1500 | V | CDM, ANSI/ESD STM5.3.1 | 4 |
| Operating temperature range | Toper | -40 | | 125 | °C | | 5 |
| Supply voltage (VCC+ - VCC-) | VCC | 1.6 | | 5 | V | -40°C < Tamb < +125°C | 5 |
| Thermal resistance junction to ambient, SOT23-5 | Rthja | | 250 | | °C/W | SOT23-5 package; values stated as typical | 4 |
| Thermal resistance junction to case, SOT23-5 | Rthjc | | 81 | | °C/W | SOT23-5 package | 4 |
## CAD (KiCad official)
- Symbol: `TS331ILT`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `ts331ilt-etched.step` / `ts331ilt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ts331ilt.step` / `ts331ilt.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586200213756760064) (27 pp, sha256 `0619a5861cfbab12`, retrieved 2026-09-26, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ts331ilt-datasheet.pdf)