component
TS1854IDT
Public Made by Adomby adom
STMicroelectronics Operational Amplifier, SOIC-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTS1854IDT
STMicroelectronics · Operational Amplifier · SOIC-14
TS1854IDT from STMicroelectronics, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out1 | output | Output of amplifier 1, which swings rail-to-rail; the datasheet notes a maximum output current of approximately 48 mA independent of VCC, and short-circuits to VCC can cause excessive heating. |
| 2 | In1- | input | Inverting input of amplifier 1; the common-mode input range extends from VCC- - 0.2 V to VCC+ + 0.2 V, and the input voltage must stay within VCC- - 0.3 V to VCC+ + 0.3 V. |
| 3 | In1+ | input | Non-inverting input of amplifier 1; the common-mode input range extends from VCC- - 0.2 V to VCC+ + 0.2 V, and the input voltage must stay within VCC- - 0.3 V to VCC+ + 0.3 V. |
| 4 | VCC+ | power_in | Positive supply voltage, specified from 1.8 V to 6 V operating, with an absolute maximum of 7 V. |
| 5 | In2+ | input | Non-inverting input of amplifier 2; the common-mode input range extends from VCC- - 0.2 V to VCC+ + 0.2 V, and the input voltage must stay within VCC- - 0.3 V to VCC+ + 0.3 V. |
| 6 | In2- | input | Inverting input of amplifier 2; the common-mode input range extends from VCC- - 0.2 V to VCC+ + 0.2 V, and the input voltage must stay within VCC- - 0.3 V to VCC+ + 0.3 V. |
| 7 | Out2 | output | Output of amplifier 2, which swings rail-to-rail; the datasheet notes a maximum output current of approximately 48 mA independent of VCC, and short-circuits to VCC can cause excessive heating. |
| 8 | Out3 | output | Output of amplifier 3, which swings rail-to-rail; the datasheet notes a maximum output current of approximately 48 mA independent of VCC, and short-circuits to VCC can cause excessive heating. |
| 9 | In3- | input | Inverting input of amplifier 3; the common-mode input range extends from VCC- - 0.2 V to VCC+ + 0.2 V, and the input voltage must stay within VCC- - 0.3 V to VCC+ + 0.3 V. |
| 10 | In3+ | input | Non-inverting input of amplifier 3; the common-mode input range extends from VCC- - 0.2 V to VCC+ + 0.2 V, and the input voltage must stay within VCC- - 0.3 V to VCC+ + 0.3 V. |
| 11 | VCC- | power_in | Negative supply rail, which is 0 V in the datasheet's electrical characteristics test conditions. |
| 12 | In4+ | input | Non-inverting input of amplifier 4; the common-mode input range extends from VCC- - 0.2 V to VCC+ + 0.2 V, and the input voltage must stay within VCC- - 0.3 V to VCC+ + 0.3 V. |
| 13 | In4- | input | Inverting input of amplifier 4; the common-mode input range extends from VCC- - 0.2 V to VCC+ + 0.2 V, and the input voltage must stay within VCC- - 0.3 V to VCC+ + 0.3 V. |
| 14 | Out4 | output | Output of amplifier 4, which swings rail-to-rail; the datasheet notes a maximum output current of approximately 48 mA independent of VCC, and short-circuits to VCC can cause excessive heating. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOIC-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
CAD (KiCad official)
- Symbol:
TS1854IDT - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files:
ts1854idt-etched.step/ts1854idt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ts1854idt.step/ts1854idt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (24 pp, sha256
581493ad3b8af97a, retrieved 2026-10-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).