3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownTS117
Littelfuse/IXYS · Solid State Relays (MOS Output) · SOP-8
TS117 from Littelfuse/IXYS, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | +LED (Relay) | input | Anode of the relay-section infrared LED, which needs 2 mA max to activate and 0.4 mA min to deactivate the relay (50 mA continuous max, 5 V reverse max). |
| 2 | -LED (Relay) | input | Cathode of the relay-section infrared LED, returned to the drive source (input control current 50 mA max, 1 A peak for 10 ms). |
| 3 | Collector (Phototransistor) | passive | Collector of the detector phototransistor, with 20 V min blocking voltage (BVCEO at IC=10 µA). |
| 4 | Emitter (Phototransistor) | passive | Emitter of the detector phototransistor, which has a 33% min current transfer ratio at IF=6 mA, VCE=0.5 V. |
| 5 | LED (Phototransistor) +/- | input | Detector-section LED terminal, polarity-agnostic (pairs with pin 6), for AC or DC sensing with 100 mA max input control current. |
| 6 | LED (Phototransistor) -/+ | input | Detector-section LED terminal, polarity-agnostic (pairs with pin 5), for AC or DC sensing with 100 mA max input control current. |
| 7 | Load (Relay) | passive | MOSFET output terminal of the normally open relay, rated 350 VP blocking and 120 mA continuous load current. |
| 8 | Load (Relay) | passive | MOSFET output terminal of the normally open relay, rated 350 VP blocking and 120 mA continuous load current, with 35 Ω max on-resistance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Littelfuse/IXYS |
| Package | SOP-8 |
| Category | Optoisolators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Load Current Continuous | IL | 120 | mArms / mADC | Continuous | 2 | ||
| Load Current Peak | ILPK | -350 | 350 | mAP | t=10ms | 2 | |
| On-Resistance | RON | 23 | 35 | Ω | IL=120mA | 2 | |
| Off-State Leakage Current | ILEAK | 1 | A | VL=350V | 2 | ||
| Turn-On Time | ton | 3 | ms | IF=5mA, VL=10V | 2 | ||
| Turn-Off Time | toff | 3 | ms | 2 | |||
| Output Capacitance | COUT | 25 | pF | VL=50V, f=1MHz | 2 | ||
| Input Control Current to Activate | IF | 2 | mA | IL=120mA | 2 | ||
| Input Control Current to Deactivate | IF | 0.4 | 0.7 | mA | 2 | ||
| Input Voltage Drop (Relay LED) | VF | 0.9 | 1.2 | 1.4 | V | IF=5mA | 2 |
| Reverse Input Current | IR | 10 | A | VR=5V | 2 | ||
| Phototransistor Blocking Voltage | BVCEO | 20 | 50 | V | IC=10A | 2 | |
| Phototransistor Dark Current | ICEO | 50 | 500 | nA | VCE=5V, IF=0mA | 2 | |
| Saturation Voltage | VSAT | 0.3 | 0.5 | V | IC=2mA, IF=16mA | 2 | |
| Current Transfer Ratio | CTR | 33 | 100 | % | IF=6mA, VCE=0.5V | 2 | |
| Input Control Current (Detector) | IF | 2 | 6 | mA | IC=2mA, VCE=0.5V | 2 | |
| Input Voltage Drop (Detector LED) | VF | 0.9 | 1.2 | 1.4 | V | IF=5mA | 2 |
| Input Current (Detector Must be Off) | IF | 5 | 25 | A | IC=1A, VCE=5V | 2 | |
| Isolation, Input to Output | VI/O | 3750 | Vrms | 2 | |||
| Blocking Voltage | 350 | VP | 2 | ||||
| Input Power Dissipation | 150 | mW | Derate linearly 1.33 mW/°C | 2 | |||
| Input Control Current, Relay | 50 | mA | 2 | ||||
| Input Control Current, Relay Peak | 1 | A | Peak (10ms) | 2 | |||
| Input Control Current, Detector | 100 | mA | 2 | ||||
| Reverse Input Voltage | 5 | V | 2 | ||||
| Total Power Dissipation | 800 | mW | Derate linearly 6.67 mW/°C | 2 | |||
| Isolation Voltage, Input to Output | 3750 | Vrms | 2 | ||||
| Operational Temperature | -40 | 85 | °C | 2 | |||
| Storage Temperature | -40 | 125 | °C | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PC | its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all o | 6 |
CAD (KiCad official)
- Symbol:
TS117 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
ts117-etched.step/ts117-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ts117.step/ts117.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Littelfuse/IXYS datasheet (8 pp, sha256
b7cea3bd9aee8bd0, retrieved 2026-11-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).