main
Ray
Publish 0.1.0
156359b
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387
{
"slug": "trsf3243eirhbr",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments RS232 ICs, VQFN-32(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"interface",
"trsf3243eirhbr",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"trsf3243eirhbr.kicad_sym",
"trsf3243eirhbr.kicad_mod",
"trsf3243eirhbr.glb",
"trsf3243eirhbr.step",
"trsf3243eirhbr.lbr",
"docs/hero.png",
"docs/trsf3243eirhbr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"trsf3243eirhbr-hero.glb",
"trsf3243eirhbr-hero.overlay.json",
"trsf3243eirhbr-etched.glb"
],
"component": {
"mpn": "TRSF3243EIRHBR",
"manufacturer": "Texas Instruments",
"package": "VQFN-32(5x5)",
"pin_count": 33,
"category": "Interface",
"subcategory": "RS232 ICs",
"datasheet": "https://www.ti.com/lit/ds/symlink/trsf3243e.pdf",
"parts": {
"symbol": "trsf3243eirhbr.kicad_sym",
"footprint": "trsf3243eirhbr.kicad_mod",
"model_3d": "trsf3243eirhbr-hero.glb",
"model_3d_plain": "trsf3243eirhbr-etched.glb",
"model_3d_step": "trsf3243eirhbr-etched.step",
"model_3d_step_plain": "trsf3243eirhbr.step",
"lbr": "trsf3243eirhbr.lbr"
},
"distributor_links": {
"lcsc": "C3198300",
"digikey": "296-TRSF3243EIRHBRTR-ND",
"mouser": "595-TRSF3243EIRHBR"
},
"distributor_check": {
"checked_at": "2026-11-11T11:15:38Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-TRSF3243EIRHBRTR-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "595-TRSF3243EIRHBR",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "RIN1",
"type": "input",
"description": "RS-232 receiver input 1, rated for receiver input voltage of -25 V to 25 V."
},
{
"number": "2",
"name": "RIN2",
"type": "input",
"description": "RS-232 receiver input 2, rated for receiver input voltage of -25 V to 25 V."
},
{
"number": "3",
"name": "RIN3",
"type": "input",
"description": "RS-232 receiver input 3, rated for receiver input voltage of -25 V to 25 V."
},
{
"number": "4",
"name": "RIN4",
"type": "input",
"description": "RS-232 receiver input 4, rated for receiver input voltage of -25 V to 25 V."
},
{
"number": "5",
"name": "RIN5",
"type": "input",
"description": "RS-232 receiver input 5, rated for receiver input voltage of -25 V to 25 V."
},
{
"number": "6",
"name": "DOUT1",
"type": "output",
"description": "RS-232 driver output 1, with output voltage range of -13.2 V to 13.2 V."
},
{
"number": "7",
"name": "DOUT2",
"type": "output",
"description": "RS-232 driver output 2, with output voltage range of -13.2 V to 13.2 V."
},
{
"number": "8",
"name": "DOUT3",
"type": "output",
"description": "RS-232 driver output 3, with output voltage range of -13.2 V to 13.2 V."
},
{
"number": "9",
"name": "NC",
"type": "unconnected",
"description": "No internal connection."
},
{
"number": "10",
"name": "DIN3",
"type": "input",
"description": "Driver logic input 3, with VIH minimum of 2.4 V at VCC = 5 V (2 V at VCC = 3.3 V), VIL maximum of 0.8 V, and input range up to 5.5 V."
},
{
"number": "11",
"name": "DIN2",
"type": "input",
"description": "Driver logic input 2, with VIH minimum of 2.4 V at VCC = 5 V (2 V at VCC = 3.3 V), VIL maximum of 0.8 V, and input range up to 5.5 V."
},
{
"number": "12",
"name": "DIN1",
"type": "input",
"description": "Driver logic input 1, with VIH minimum of 2.4 V at VCC = 5 V (2 V at VCC = 3.3 V), VIL maximum of 0.8 V, and input range up to 5.5 V."
},
{
"number": "13",
"name": "ROUT5",
"type": "output",
"description": "Receiver logic output 5, with VOH minimum of VCC - 0.6 V at -1 mA and VOL maximum of 0.4 V at 1.6 mA."
},
{
"number": "14",
"name": "ROUT4",
"type": "output",
"description": "Receiver logic output 4, with VOH minimum of VCC - 0.6 V at -1 mA and VOL maximum of 0.4 V at 1.6 mA."
},
{
"number": "15",
"name": "ROUT3",
"type": "output",
"description": "Receiver logic output 3, with VOH minimum of VCC - 0.6 V at -1 mA and VOL maximum of 0.4 V at 1.6 mA."
},
{
"number": "16",
"name": "NC",
"type": "unconnected",
"description": "No internal connection."
},
{
"number": "17",
"name": "ROUT2",
"type": "output",
"description": "Receiver logic output 2, with VOH minimum of VCC - 0.6 V at -1 mA and VOL maximum of 0.4 V at 1.6 mA."
},
{
"number": "18",
"name": "ROUT1",
"type": "output",
"description": "Receiver logic output 1, with VOH minimum of VCC - 0.6 V at -1 mA and VOL maximum of 0.4 V at 1.6 mA."
},
{
"number": "19",
"name": "ROUT2B",
"type": "output",
"description": "Always-active non-inverting receiver output that remains operational when the device is powered down, for ring-indicator use."
},
{
"number": "20",
"name": "INVALID",
"type": "output",
"description": "Invalid output that is high when any receiver input is greater than 2.7 V or less than -2.7 V (valid RS-232 signal) and low when all receiver inputs stay between -0.3 V and 0.3 V for more than 30 µs."
},
{
"number": "21",
"name": "FORCEOFF",
"type": "input",
"description": "Auto-powerdown control input; driving it low powers off drivers and receivers (except ROUT2B) and reduces supply current to 1 µA."
},
{
"number": "22",
"name": "FORCEON",
"type": "input",
"description": "Auto-powerdown control input; with FORCEOFF high, FORCEON low enables auto-powerdown and FORCEON high disables it."
},
{
"number": "23",
"name": "C1-",
"type": "passive",
"description": "Negative terminal of the charge-pump capacitor C1 (0.1 µF at VCC = 3.3 V, 0.047 µF at VCC = 5 V per Table 8-1 / Table 6.4 notes)."
},
{
"number": "24",
"name": "GND",
"type": "power_in",
"description": "Ground reference for the device, with all voltages referenced to network GND."
},
{
"number": "25",
"name": "NC",
"type": "unconnected",
"description": "No internal connection."
},
{
"number": "26",
"name": "VCC",
"type": "power_in",
"description": "Supply voltage input; must be between 3 V and 5.5 V."
},
{
"number": "27",
"name": "V+",
"type": "power_out",
"description": "Positive charge-pump rail generated by the device; absolute maximum range -0.3 V to 7 V and must be bypassed with a ceramic capacitor."
},
{
"number": "28",
"name": "C1+",
"type": "passive",
"description": "Positive terminal of the charge-pump capacitor C1."
},
{
"number": "29",
"name": "C2+",
"type": "passive",
"description": "Positive terminal of the charge-pump capacitor C2 (0.33 µF at VCC = 5 V, 0.1 µF at VCC = 3.3 V per Table 8-1)."
},
{
"number": "30",
"name": "C2-",
"type": "passive",
"description": "Negative terminal of the charge-pump capacitor C2 (0.33 µF at VCC = 5 V, 0.1 µF at VCC = 3.3 V per Table 8-1)."
},
{
"number": "31",
"name": "V-",
"type": "power_out",
"description": "Negative charge-pump rail generated by the device; absolute maximum of -7 V and must be bypassed with a ceramic capacitor."
},
{
"number": "32",
"name": "NC",
"type": "unconnected",
"description": "No internal connection."
},
{
"number": "33",
"name": "PAD",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Pinout taken from Table 5-2 and Figure 5-2 (RHB VQFN, 32 pin). The TI package addendum on page 19 li; The exposed thermal pad (drawn as pin 33 in Figure 5-2 and the package/land-pattern drawings, pages ; Pin descriptions for INVALID, FORCEOFF and FORCEON combine Table 5-2 with the operating-mode text an",
"exposed pad 33 added from the footprint"
],
"pages_sent": 28,
"cost_usd": 0.1152,
"at": "2026-11-11T11:15:25"
},
"datasheet": {
"url": "https://www.ti.com/lit/ds/symlink/trsf3243e.pdf",
"pages": 28,
"sha256": "64c7ae29e9dfc78a",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 33,
"described": 33,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "trsf3243eirhbr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5.0,
5.0,
0.875
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "5fa713ea46b36980895812ed853577889b7cb06d275041a39b99bc0be305dc79",
"checked": "2026-11-11",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "trsf3243eirhbr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5.0,
5.0,
0.875
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "290db252c402b9af68c6dfb8c1d966f6392f13aabc3f3d45d180bbaf3d3d349c",
"checked": "2026-11-11",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "RHB0032E",
"source_page": 24,
"D": {
"nom_mm": 5.0,
"range_mm": [
4.9,
5.1
]
},
"E1": {
"nom_mm": 5.0,
"range_mm": [
4.9,
5.1
]
},
"e": {
"nom_mm": 0.5,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 1.0,
"range_mm": [
null,
1.0
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "trsf3243eirhbr.step",
"verdict": "PASS",
"reasons": [
"height within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}