3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTRSF3232EIPW
Texas Instruments · RS232 ICs · TSSOP-16
TRSF3232EIPW from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive lead of the C1 charge-pump capacitor, connected to C1- through the external capacitor selected from Table 8-1. |
| 2 | V+ | power_out | Positive charge-pump output, for the storage capacitor only. |
| 3 | C1- | passive | Negative lead of the C1 charge-pump capacitor. |
| 4 | C2+ | passive | Positive lead of the C2 charge-pump capacitor. |
| 5 | C2- | passive | Negative lead of the C2 charge-pump capacitor. |
| 6 | V- | power_out | Negative charge-pump output, for the storage capacitor only. |
| 7 | DOUT2 | output | RS-232 line data output to the remote RS-232 system, rated ±15 kV HBM and IEC 61000-4-2 air-gap ESD and ±8 kV IEC contact ESD. |
| 8 | RIN2 | input | RS-232 line data input from the remote RS-232 system, with receiver input voltage range of −25 V to 25 V. |
| 9 | ROUT2 | output | Logic data output to the UART. |
| 10 | DIN2 | input | Logic data input from the UART, which must be held at a valid high or low level, with input range 0 V to 5.5 V and VIL of 0.8 V maximum. |
| 11 | DIN1 | input | Logic data input from the UART, which must be held at a valid high or low level, with input range 0 V to 5.5 V and VIL of 0.8 V maximum. |
| 12 | ROUT1 | output | Logic data output to the UART. |
| 13 | RIN1 | input | RS-232 line data input from the remote RS-232 system, with receiver input voltage range of −25 V to 25 V. |
| 14 | DOUT1 | output | RS-232 line data output to the remote RS-232 system, rated ±15 kV HBM and IEC 61000-4-2 air-gap ESD and ±8 kV IEC contact ESD. |
| 15 | GND | power_in | Ground reference for the device (labelled GRD in the Table 4-1 pin function list). |
| 16 | VCC | power_in | Supply voltage, connect to an external 3 V to 5.5 V power supply. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | Interface |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply current | ICC | 0.3 | 1 | mA | No load, VCC = 3.3 V or 5 V | 5 | |
| Supply voltage range | VCC | -0.3 | 6 | V | 4 | ||
| Positive-output supply voltage range | V+ | -0.3 | 7 | V | 4 | ||
| Negative-output supply voltage range | V- | 0.3 | -7 | V | 4 | ||
| Supply voltage difference | V+, V- | 13 | V | 4 | |||
| Input voltage range, drivers | VI | -0.3 | 6 | V | Drivers | 4 | |
| Input voltage range, receivers | VI | -25 | 25 | V | Receivers | 4 | |
| Output voltage range, drivers | VO | -13.2 | 13.2 | V | Drivers | 4 | |
| Operating virtual junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage | 3 | 3.3 | 3.6 | V | VCC = 3.3 V | 5 | |
| Supply voltage | 4.5 | 5 | 5.5 | V | VCC = 5 V | 5 | |
| Driver high-level input voltage DIN | VIH | 2 | V | VCC = 3.3 V | 5 | ||
| Driver high-level input voltage DIN | VIH | 2.4 | V | VCC = 5 V | 5 | ||
| Driver low-level input voltage DIN | VIL | 0.8 | V | 5 | |||
| Driver input voltage DIN | VI | 0 | 5.5 | V | 5 | ||
| Receiver input voltage | -25 | 25 | V | 5 | |||
| Operating free-air temperature | TA | -40 | 85 | °C | TRSF3232EI | 5 | |
| Junction-to-ambient thermal resistance | RθJA | 108.2 | °C/W | PW (TSSOP), 16 pins | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 39 | °C/W | PW (TSSOP), 16 pins | 5 | ||
| Junction-to-board thermal resistance | RθJB | 54.4 | °C/W | PW (TSSOP), 16 pins | 5 | ||
| Junction-to-top characterization parameter | ψJT | 3.3 | °C/W | PW (TSSOP), 16 pins | 5 | ||
| Junction-to-board characterization parameter | ψJB | 53.8 | °C/W | PW (TSSOP), 16 pins | 5 | ||
| Driver high-level output voltage | VOH | 5 | 5.5 | V | DOUT at RL = 3 kΩ to GND, DIN = GND | 6 | |
| Driver low-level output voltage | VOL | -5 | -5.4 | V | DOUT at RL = 3 kΩ to GND, DIN = VCC | 6 | |
| High-level input current | IIH | -1 | 0.01 | 1 | μA | VI = VCC | 6 |
| Low-level input current | IIL | -1 | 0.01 | 1 | μA | VI at GND | 6 |
| Short-circuit output current | IOS | -60 | 35 | 60 | mA | VCC = 3.6 V, VO = 0 V | 6 |
| Short-circuit output current, D, DB, DW, PW packages | IOS | -90 | 35 | 90 | mA | VCC = 5.5 V, VO = 0 V | 6 |
| Output resistance | ro | 300 | Ω | VCC, V+, and V- = 0 V, VO = ±2 V | 6 | ||
| Receiver low-level output voltage | VOL | 0.4 | V | IOL = 1.6 mA | 6 | ||
| Receiver positive-going input threshold voltage | VIT+ | 1.5 | 2.4 | V | VCC = 3.3 V | 6 | |
| Receiver positive-going input threshold voltage | VIT+ | 1.8 | 2.4 | V | VCC = 5 V | 6 | |
| Receiver negative-going input threshold voltage | VIT- | 0.6 | 1.2 | V | VCC = 3.3 V | 6 | |
| Receiver negative-going input threshold voltage | VIT- | 0.8 | 1.5 | V | VCC = 5 V | 6 | |
| Input resistance | ri | 3 | 5 | 7 | kΩ | VI = ±3 V to ±25 V | 6 |
| Maximum data rate | 1000 | kbit/s | RL = 3 kΩ, one DOUT switching, CL = 250 pF, VCC = 3 V to 4.5 V | 7 | |||
| Driver pulse skew, D, DB, DW, PW packages | tsk(p) | 300 | ns | CL = 150 pF to 2500 pF, RL = 3 kΩ to 7 kΩ | 7 | ||
| Driver slew rate, transition region | SR(tr) | 14 | 150 | V/μs | RL = 3 kΩ to 7 kΩ, CL = 150 pF to 1000 pF, VCC = 3.3 V | 7 | |
| Receiver propagation delay, low- to high-level output, D, DB, DW, PW packages | tPLH | 300 | ns | CL = 150 pF | 7 | ||
| Receiver propagation delay, high- to low-level output, D, DB, DW, PW packages | tPHL | 300 | ns | CL = 150 pF | 7 | ||
| Receiver pulse skew, D, DB, DW, PW packages | tsk(p) | 300 | ns | 7 |
CAD (KiCad official)
- Symbol:
TRSF3232EIPW - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
trsf3232eipw-etched.step/trsf3232eipw-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);trsf3232eipw.step/trsf3232eipw.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (40 pp, sha256
22bc4b3b0748d4ba, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).