main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs trsf3221eirgtr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers trsf3221eirgtr: viewers · Ray
package.json trsf3221eirgtr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json trsf3221eirgtr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/trsf3221eirgtr · Ray
trsf3221eirgtr-etched.fit.json trsf3221eirgtr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
trsf3221eirgtr-etched.glb trsf3221eirgtr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
trsf3221eirgtr-etched.step trsf3221eirgtr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
trsf3221eirgtr.glb Publish 0.1.0 · Ray
trsf3221eirgtr.kicad_mod Publish 0.1.0 · Ray
trsf3221eirgtr.kicad_sym Publish 0.1.0 · Ray
trsf3221eirgtr.lbr Publish 0.1.0 · Ray
trsf3221eirgtr.step Publish 0.1.0 · Ray

TRSF3221EIRGTR

Texas Instruments · RS232 ICs · VQFN-16(3x3)

TRSF3221EIRGTR from Texas Instruments, in a VQFN-16(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 C1- passive Negative lead of C1 capacitor; connects to external 0.1µF capacitor for 3.3V operation or 0.047µF for 5V operation.
2 C2+ passive Positive lead of C2 capacitor; connects to external 0.1µF capacitor for 3.3V operation or 0.33µF for 5V operation.
3 C2- passive Negative lead of C2 capacitor; connects to external 0.1µF capacitor for 3.3V operation or 0.33µF for 5V operation.
4 V- power_out Negative charge pump output for storage capacitor only; generates approximately -5.5V supply for external capacitor.
5 RIN input RS232 line data input from remote RS232 system; accepts RS-232 voltage levels from -25V to +25V.
6 ROUT output Logic data output to UART; high-level output voltage is VCC - 0.1V, low-level output voltage is 0.4V at 1.6mA load.
7 INVALID output Invalid output pin indicating receiver signal validity; outputs high when RIN input has valid RS-232 level or low when RIN input is unpowered.
8 DIN input Logic data input from UART; accepts 0V to VCC logic levels, or up to 5.5V when powered from 3.3V supply.
9 FORCEON input Automatic power-down control input; when low with FORCEOFF high, enables auto-powerdown mode to reduce supply current.
10 DOUT output RS232 line data output to remote RS232 system; outputs ±5V to ±5.4V at 3kΩ load impedance with slew rate 24V/µs to 150V/µs.
11 GND power_in Ground; electrical reference point for all signals, connect to system ground plane.
12 VCC power_in Supply voltage input; connect to external 3V to 5.5V power supply with 0.1µF bypass capacitor for bypass.
13 FORCEOFF input Automatic power-down control input; when high with FORCEON low, enables auto-powerdown mode to reduce supply current to 1µA.
14 EN input Receiver output enable input; low input enables receiver ROUT output, high input sets ROUT to high impedance.
15 V+ power_out Positive charge pump output for storage capacitor only; generates approximately +5.5V supply for external capacitor.
16 C1+ passive Positive lead of C1 capacitor; connects to external 0.1µF capacitor for 3.3V operation or 0.047µF for 5V operation.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-16(3x3)
Category Interface
Pins 17

CAD (KiCad official)

  • Symbol: TRSF3221EIRGTR
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: VQFN-16(3x3) (KiCad packages3D, STEP)
  • 3D model files: trsf3221eirgtr-etched.step / trsf3221eirgtr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); trsf3221eirgtr.step / trsf3221eirgtr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (37 pp, sha256 7b871526ac20c19b, retrieved 2026-09-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF