component
TRS3386ECPWR
Public Made by Adomby adom
Texas Instruments RS232 ICs, TSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 14h ago |
| viewers | 14h ago |
| package.json | 14h ago |
| page.json | 14h ago |
| README.md | 14h ago |
| trs3386ecpwr-etched.glb | 14h ago |
| trs3386ecpwr-etched.step | 14h ago |
| trs3386ecpwr-hero.glb | 14h ago |
| trs3386ecpwr-hero.overlay.json | 14h ago |
| trs3386ecpwr.glb | 14h ago |
| trs3386ecpwr.kicad_mod | 14h ago |
| trs3386ecpwr.kicad_sym | 14h ago |
| trs3386ecpwr.lbr | 14h ago |
| trs3386ecpwr.step | 14h ago |
TRS3386ECPWR
Texas Instruments · RS232 ICs · TSSOP-20
TRS3386ECPWR from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive terminal of voltage-doubler charge-pump capacitor for external 0.1 to 0.33 μF capacitor. |
| 2 | V+ | power_out | Positive charge-pump supply output nominally 5.5 V for RS-232 driver circuit. |
| 3 | C1− | passive | Negative terminal of voltage-doubler charge-pump capacitor. |
| 4 | C2+ | passive | Positive terminal of inverting charge-pump capacitor for external 0.1 to 0.33 μF capacitor. |
| 5 | C2− | passive | Negative terminal of inverting charge-pump capacitor. |
| 6 | V− | power_out | Negative charge-pump supply output nominally −5.5 V for RS-232 driver circuit. |
| 7 | DIN1 | input | Driver input for TTL/CMOS logic levels referenced to VL with 0.5 V hysteresis. |
| 8 | DIN2 | input | Driver input for TTL/CMOS logic levels referenced to VL with 0.5 V hysteresis. |
| 9 | DIN3 | input | Driver input for TTL/CMOS logic levels referenced to VL with 0.5 V hysteresis. |
| 10 | ROUT2 | output | Receiver output swinging from 0 to VL with maximum 0.15 μs propagation delay. |
| 11 | ROUT1 | output | Receiver output swinging from 0 to VL with maximum 0.15 μs propagation delay. |
| 12 | VL | power_in | Logic supply input from 2.25 V to VCC for all CMOS inputs and outputs. |
| 13 | RIN2 | input | RS-232 receiver input accepting ±25 V with 3 to 7 kΩ input resistance. |
| 14 | RIN1 | input | RS-232 receiver input accepting ±25 V with 3 to 7 kΩ input resistance. |
| 15 | DOUT3 | output | RS-232 driver output swinging ±5.4 V typical with 0.15 μs skew on 3 kΩ load. |
| 16 | DOUT2 | output | RS-232 driver output swinging ±5.4 V typical with 0.15 μs skew on 3 kΩ load. |
| 17 | DOUT1 | output | RS-232 driver output swinging ±5.4 V typical with 0.15 μs skew on 3 kΩ load. |
| 18 | GND | power_in | Ground reference for all signal and supply voltages. |
| 19 | VCC | power_in | Supply voltage input from 3 V to 5.5 V for charge pump and logic circuits. |
| 20 | PWRDWN | input | Powerdown control input; logic low enables 1 μA shutdown mode, high enables normal 0.3 to 1 mA operation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-20 |
| Category | Interface |
| Pins | 20 |
CAD (KiCad official)
- Symbol:
TRS3386ECPWR - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
trs3386ecpwr-etched.step/trs3386ecpwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);trs3386ecpwr.step/trs3386ecpwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (21 pp, sha256
27ac23532b1b85b6, retrieved 2026-10-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).