main
Ray Set visibility: public 44741b6
{
  "schema_version": 1,
  "type": "component",
  "slug": "trs3243cdbr",
  "title": "TRS3243CDBR",
  "brief": "Texas Instruments RS232 ICs, SSOP-28-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "interface",
    "trs3243cdbr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "TRS3243CDBR",
    "manufacturer": "Texas Instruments",
    "package": "SSOP-28-208mil",
    "pin_count": 28,
    "category": "Interface",
    "subcategory": "RS232 ICs",
    "datasheet": "https://www.ti.com/cn/lit/gpn/trs3243",
    "parts": {
      "symbol": "trs3243cdbr.kicad_sym",
      "footprint": "trs3243cdbr.kicad_mod",
      "model_3d": "trs3243cdbr-hero.glb",
      "model_3d_plain": "trs3243cdbr.glb",
      "model_3d_step": "trs3243cdbr-etched.step",
      "model_3d_step_plain": "trs3243cdbr.step",
      "lbr": "trs3243cdbr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2671218",
      "digikey": "296-25053-2-ND",
      "mouser": "595-TRS3243CDBR"
    },
    "distributor_check": {
      "checked_at": "2026-10-12T04:35:36Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-25053-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TRS3243CDBR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "C2+",
        "type": "passive",
        "description": "Positive terminal of the voltage-doubler charge-pump capacitor (C2), which the datasheet specifies as 0.1 µF at VCC = 3.3 V and 0.33 µF at VCC = 5 V."
      },
      {
        "number": "2",
        "name": "C2-",
        "type": "passive",
        "description": "Negative terminal of the voltage-doubler charge-pump capacitor (C2), which connects to the charge pump between C2+ and V-."
      },
      {
        "number": "3",
        "name": "V-",
        "type": "power_out",
        "description": "Negative charge-pump output voltage, generated and regulated by the internal charge pump and referenced to network GND."
      },
      {
        "number": "4",
        "name": "RIN1",
        "type": "input",
        "description": "RS-232 receiver input 1, which accepts ±25 V per the Recommended Operating Conditions and has an internal 5 kΩ load."
      },
      {
        "number": "5",
        "name": "RIN2",
        "type": "input",
        "description": "RS-232 receiver input 2, which accepts ±25 V per the Recommended Operating Conditions and also feeds the always-active ROUT2B output."
      },
      {
        "number": "6",
        "name": "RIN3",
        "type": "input",
        "description": "RS-232 receiver input 3, which accepts ±25 V per the Recommended Operating Conditions and has an internal 5 kΩ load."
      },
      {
        "number": "7",
        "name": "RIN4",
        "type": "input",
        "description": "RS-232 receiver input 4, which accepts ±25 V per the Recommended Operating Conditions and has an internal 5 kΩ load."
      },
      {
        "number": "8",
        "name": "RIN5",
        "type": "input",
        "description": "RS-232 receiver input 5, which accepts ±25 V per the Recommended Operating Conditions and has an internal 5 kΩ load."
      },
      {
        "number": "9",
        "name": "DOUT1",
        "type": "output",
        "description": "RS-232 driver output 1, which must stay within the ±13.2 V absolute maximum output voltage range and has a short-circuit current of ±35 to ±60 mA."
      },
      {
        "number": "10",
        "name": "DOUT2",
        "type": "output",
        "description": "RS-232 driver output 2, which must stay within the ±13.2 V absolute maximum output voltage range and has a short-circuit current of ±35 to ±60 mA."
      },
      {
        "number": "11",
        "name": "DOUT3",
        "type": "output",
        "description": "RS-232 driver output 3, which must stay within the ±13.2 V absolute maximum output voltage range and has a short-circuit current of ±35 to ±60 mA."
      },
      {
        "number": "12",
        "name": "DIN3",
        "type": "input",
        "description": "Driver logic input 3, which must be held at a valid low or high level (VIL max 0.8 V; VIH min 2 V at 3.3 V VCC or 2.4 V at 5 V VCC; input range 0 to 5.5 V)."
      },
      {
        "number": "13",
        "name": "DIN2",
        "type": "input",
        "description": "Driver logic input 2, which must be held at a valid low or high level (VIL max 0.8 V; VIH min 2 V at 3.3 V VCC or 2.4 V at 5 V VCC; input range 0 to 5.5 V)."
      },
      {
        "number": "14",
        "name": "DIN1",
        "type": "input",
        "description": "Driver logic input 1, which must be held at a valid low or high level (VIL max 0.8 V; VIH min 2 V at 3.3 V VCC or 2.4 V at 5 V VCC; input range 0 to 5.5 V)."
      },
      {
        "number": "15",
        "name": "ROUT5",
        "type": "output",
        "description": "Receiver logic output 5, which goes high impedance when FORCEOFF is low (powered off)."
      },
      {
        "number": "16",
        "name": "ROUT4",
        "type": "output",
        "description": "Receiver logic output 4, which goes high impedance when FORCEOFF is low (powered off)."
      },
      {
        "number": "17",
        "name": "ROUT3",
        "type": "output",
        "description": "Receiver logic output 3, which goes high impedance when FORCEOFF is low (powered off)."
      },
      {
        "number": "18",
        "name": "ROUT2",
        "type": "output",
        "description": "Receiver logic output 2, which goes high impedance when FORCEOFF is low (powered off)."
      },
      {
        "number": "19",
        "name": "ROUT1",
        "type": "output",
        "description": "Receiver logic output 1, which goes high impedance when FORCEOFF is low (powered off)."
      },
      {
        "number": "20",
        "name": "ROUT2B",
        "type": "output",
        "description": "Always-active noninverting receiver output of RIN2 that stays enabled while the device is powered down, allowing ring-indicator data transmission."
      },
      {
        "number": "21",
        "name": "INVALID",
        "type": "output",
        "description": "Invalid-data output that is high when any receiver input is a valid RS-232 level (above 2.7 V or below -2.7 V) and low when all receiver inputs are between -0.3 V and 0.3 V for more than 30 µs; it is always enabled."
      },
      {
        "number": "22",
        "name": "FORCEOFF",
        "type": "input",
        "description": "Automatic power-down control input; driving it low powers off all drivers and receivers except ROUT2B and INVALID, and it must be tied to a valid high or low logic level (VCC or GND)."
      },
      {
        "number": "23",
        "name": "FORCEON",
        "type": "input",
        "description": "Automatic power-down control input; driving it high overrides automatic power down and keeps the drivers active, and it must be tied to a valid high or low logic level (VCC or GND)."
      },
      {
        "number": "24",
        "name": "C1-",
        "type": "passive",
        "description": "Negative terminal of the voltage-doubler charge-pump capacitor (C1), connected between C1+ and this pin."
      },
      {
        "number": "25",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground; all voltages on the device are referenced to network GND."
      },
      {
        "number": "26",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage input, which must be 3 V to 5.5 V (3.3 V nominal range 3 V to 3.6 V, 5 V nominal range 4.5 V to 5.5 V)."
      },
      {
        "number": "27",
        "name": "V+",
        "type": "power_out",
        "description": "Positive charge-pump output voltage, generated and regulated by the internal charge pump and referenced to network GND."
      },
      {
        "number": "28",
        "name": "C1+",
        "type": "passive",
        "description": "Positive terminal of the voltage-doubler charge-pump capacitor (C1), which the datasheet specifies as 0.1 µF at VCC = 3.3 V and 0.047 µF at VCC = 5 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet's pin-function table gives no type for ROUT2B (shown as '—'); type 'output' is inferre; The datasheet's pin-function table gives no type for V- and V+ (shown as '—'); 'power_out' is inferr; Charge-pump capacitor terminals have no type in the datasheet; 'passive' is used as the KiCad class "
        ],
        "pages_sent": 26,
        "cost_usd": 0.108,
        "at": "2026-10-12T04:35:19"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/trs3243",
        "pages": 26,
        "sha256": "fe9a6533b614250b",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 28,
        "described": 28,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "trs3243cdbr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          10.2,
          2.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "7aa76979ae41da44bded1ed74115012868f2f3f5a757faf32bb9df4f92c1e313",
        "checked": "2026-10-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "trs3243cdbr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          10.2,
          2.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "b3020a1df5ede84fa6566a70983591b47ce30a63e0be060a681061cc095e29b2",
        "checked": "2026-10-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "SSOP-28-208mil",
      "Category": "Interface",
      "Pins": "28"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "trs3243cdbr"
  ],
  "discovery_pitch": "TRS3243CDBR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "trs3243cdbr.kicad_sym",
    "trs3243cdbr.kicad_mod",
    "trs3243cdbr.glb",
    "trs3243cdbr.step",
    "trs3243cdbr.lbr",
    "docs/hero.png",
    "docs/trs3243cdbr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "trs3243cdbr-hero.glb",
    "trs3243cdbr-hero.overlay.json"
  ],
  "visibility": {
    "public": true
  }
}