main
Ray
Publish 0.1.0
b9b2b7b
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314
{
"slug": "trs3243cdbr",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments RS232 ICs, SSOP-28-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"interface",
"trs3243cdbr",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"trs3243cdbr.kicad_sym",
"trs3243cdbr.kicad_mod",
"trs3243cdbr.glb",
"trs3243cdbr.step",
"trs3243cdbr.lbr",
"docs/hero.png",
"docs/trs3243cdbr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"trs3243cdbr-hero.glb",
"trs3243cdbr-hero.overlay.json"
],
"component": {
"mpn": "TRS3243CDBR",
"manufacturer": "Texas Instruments",
"package": "SSOP-28-208mil",
"pin_count": 28,
"category": "Interface",
"subcategory": "RS232 ICs",
"datasheet": "https://www.ti.com/cn/lit/gpn/trs3243",
"parts": {
"symbol": "trs3243cdbr.kicad_sym",
"footprint": "trs3243cdbr.kicad_mod",
"model_3d": "trs3243cdbr-hero.glb",
"model_3d_plain": "trs3243cdbr.glb",
"model_3d_step": "trs3243cdbr-etched.step",
"model_3d_step_plain": "trs3243cdbr.step",
"lbr": "trs3243cdbr.lbr"
},
"distributor_links": {
"lcsc": "C2671218",
"digikey": "296-25053-2-ND",
"mouser": "595-TRS3243CDBR"
},
"distributor_check": {
"checked_at": "2026-10-12T04:35:36Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-25053-2-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "595-TRS3243CDBR",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "C2+",
"type": "passive",
"description": "Positive terminal of the voltage-doubler charge-pump capacitor (C2), which the datasheet specifies as 0.1 µF at VCC = 3.3 V and 0.33 µF at VCC = 5 V."
},
{
"number": "2",
"name": "C2-",
"type": "passive",
"description": "Negative terminal of the voltage-doubler charge-pump capacitor (C2), which connects to the charge pump between C2+ and V-."
},
{
"number": "3",
"name": "V-",
"type": "power_out",
"description": "Negative charge-pump output voltage, generated and regulated by the internal charge pump and referenced to network GND."
},
{
"number": "4",
"name": "RIN1",
"type": "input",
"description": "RS-232 receiver input 1, which accepts ±25 V per the Recommended Operating Conditions and has an internal 5 kΩ load."
},
{
"number": "5",
"name": "RIN2",
"type": "input",
"description": "RS-232 receiver input 2, which accepts ±25 V per the Recommended Operating Conditions and also feeds the always-active ROUT2B output."
},
{
"number": "6",
"name": "RIN3",
"type": "input",
"description": "RS-232 receiver input 3, which accepts ±25 V per the Recommended Operating Conditions and has an internal 5 kΩ load."
},
{
"number": "7",
"name": "RIN4",
"type": "input",
"description": "RS-232 receiver input 4, which accepts ±25 V per the Recommended Operating Conditions and has an internal 5 kΩ load."
},
{
"number": "8",
"name": "RIN5",
"type": "input",
"description": "RS-232 receiver input 5, which accepts ±25 V per the Recommended Operating Conditions and has an internal 5 kΩ load."
},
{
"number": "9",
"name": "DOUT1",
"type": "output",
"description": "RS-232 driver output 1, which must stay within the ±13.2 V absolute maximum output voltage range and has a short-circuit current of ±35 to ±60 mA."
},
{
"number": "10",
"name": "DOUT2",
"type": "output",
"description": "RS-232 driver output 2, which must stay within the ±13.2 V absolute maximum output voltage range and has a short-circuit current of ±35 to ±60 mA."
},
{
"number": "11",
"name": "DOUT3",
"type": "output",
"description": "RS-232 driver output 3, which must stay within the ±13.2 V absolute maximum output voltage range and has a short-circuit current of ±35 to ±60 mA."
},
{
"number": "12",
"name": "DIN3",
"type": "input",
"description": "Driver logic input 3, which must be held at a valid low or high level (VIL max 0.8 V; VIH min 2 V at 3.3 V VCC or 2.4 V at 5 V VCC; input range 0 to 5.5 V)."
},
{
"number": "13",
"name": "DIN2",
"type": "input",
"description": "Driver logic input 2, which must be held at a valid low or high level (VIL max 0.8 V; VIH min 2 V at 3.3 V VCC or 2.4 V at 5 V VCC; input range 0 to 5.5 V)."
},
{
"number": "14",
"name": "DIN1",
"type": "input",
"description": "Driver logic input 1, which must be held at a valid low or high level (VIL max 0.8 V; VIH min 2 V at 3.3 V VCC or 2.4 V at 5 V VCC; input range 0 to 5.5 V)."
},
{
"number": "15",
"name": "ROUT5",
"type": "output",
"description": "Receiver logic output 5, which goes high impedance when FORCEOFF is low (powered off)."
},
{
"number": "16",
"name": "ROUT4",
"type": "output",
"description": "Receiver logic output 4, which goes high impedance when FORCEOFF is low (powered off)."
},
{
"number": "17",
"name": "ROUT3",
"type": "output",
"description": "Receiver logic output 3, which goes high impedance when FORCEOFF is low (powered off)."
},
{
"number": "18",
"name": "ROUT2",
"type": "output",
"description": "Receiver logic output 2, which goes high impedance when FORCEOFF is low (powered off)."
},
{
"number": "19",
"name": "ROUT1",
"type": "output",
"description": "Receiver logic output 1, which goes high impedance when FORCEOFF is low (powered off)."
},
{
"number": "20",
"name": "ROUT2B",
"type": "output",
"description": "Always-active noninverting receiver output of RIN2 that stays enabled while the device is powered down, allowing ring-indicator data transmission."
},
{
"number": "21",
"name": "INVALID",
"type": "output",
"description": "Invalid-data output that is high when any receiver input is a valid RS-232 level (above 2.7 V or below -2.7 V) and low when all receiver inputs are between -0.3 V and 0.3 V for more than 30 µs; it is always enabled."
},
{
"number": "22",
"name": "FORCEOFF",
"type": "input",
"description": "Automatic power-down control input; driving it low powers off all drivers and receivers except ROUT2B and INVALID, and it must be tied to a valid high or low logic level (VCC or GND)."
},
{
"number": "23",
"name": "FORCEON",
"type": "input",
"description": "Automatic power-down control input; driving it high overrides automatic power down and keeps the drivers active, and it must be tied to a valid high or low logic level (VCC or GND)."
},
{
"number": "24",
"name": "C1-",
"type": "passive",
"description": "Negative terminal of the voltage-doubler charge-pump capacitor (C1), connected between C1+ and this pin."
},
{
"number": "25",
"name": "GND",
"type": "power_in",
"description": "Device ground; all voltages on the device are referenced to network GND."
},
{
"number": "26",
"name": "VCC",
"type": "power_in",
"description": "Supply voltage input, which must be 3 V to 5.5 V (3.3 V nominal range 3 V to 3.6 V, 5 V nominal range 4.5 V to 5.5 V)."
},
{
"number": "27",
"name": "V+",
"type": "power_out",
"description": "Positive charge-pump output voltage, generated and regulated by the internal charge pump and referenced to network GND."
},
{
"number": "28",
"name": "C1+",
"type": "passive",
"description": "Positive terminal of the voltage-doubler charge-pump capacitor (C1), which the datasheet specifies as 0.1 µF at VCC = 3.3 V and 0.047 µF at VCC = 5 V."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The datasheet's pin-function table gives no type for ROUT2B (shown as '—'); type 'output' is inferre; The datasheet's pin-function table gives no type for V- and V+ (shown as '—'); 'power_out' is inferr; Charge-pump capacitor terminals have no type in the datasheet; 'passive' is used as the KiCad class "
],
"pages_sent": 26,
"cost_usd": 0.108,
"at": "2026-10-12T04:35:19"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/gpn/trs3243",
"pages": 26,
"sha256": "fe9a6533b614250b",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 28,
"described": 28,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "trs3243cdbr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
7.8,
10.2,
2.1
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "7aa76979ae41da44bded1ed74115012868f2f3f5a757faf32bb9df4f92c1e313",
"checked": "2026-10-12",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "trs3243cdbr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
7.8,
10.2,
2.1
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "b3020a1df5ede84fa6566a70983591b47ce30a63e0be060a681061cc095e29b2",
"checked": "2026-10-12",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}