component
TRS3232EIPWR
Public Made by Adomby adom
Texas Instruments RS232 ICs, TSSOP-16. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+14−11@@ -32,13 +32,13 @@ "number": "1", "name": "C1+", "type": "passive",- "description": "Positive lead of charge-pump flying capacitor C1. Connect an external capacitor (0.1 \u00b5F at VCC = 3.3 V; 0.047 \u00b5F at VCC = 5 V) between C1+ and C1-."+ "description": "Positive lead of charge-pump flying capacitor C1. Connect an external capacitor (0.1 µF at VCC = 3.3 V; 0.047 µF at VCC = 5 V) between C1+ and C1-." }, { "number": "2", "name": "V+", "type": "power_out",- "description": "Positive charge-pump output for external storage capacitor only (typically +5.5 V). Requires a 0.1 \u00b5F or 0.33 \u00b5F capacitor to GND per operating conditions."+ "description": "Positive charge-pump output for external storage capacitor only (typically +5.5 V). Requires a 0.1 µF or 0.33 µF capacitor to GND per operating conditions." }, { "number": "3",@@ -50,7 +50,7 @@ "number": "4", "name": "C2+", "type": "passive",- "description": "Positive lead of charge-pump flying capacitor C2 (0.1 \u00b5F or 0.33 \u00b5F)."+ "description": "Positive lead of charge-pump flying capacitor C2 (0.1 µF or 0.33 µF)." }, { "number": "5",@@ -62,19 +62,19 @@ "number": "6", "name": "V-", "type": "power_out",- "description": "Negative charge-pump output for external storage capacitor only (typically -5.5 V). Requires a 0.1 \u00b5F or 0.33 \u00b5F capacitor to GND."+ "description": "Negative charge-pump output for external storage capacitor only (typically -5.5 V). Requires a 0.1 µF or 0.33 µF capacitor to GND." }, { "number": "7", "name": "DOUT2", "type": "output",- "description": "RS-232 line data output for channel 2 (to remote RS-232 system). Swings \u00b15 V nominal, drives 3-k\u03a9 load; \u00b115-kV IEC air-gap / \u00b18-kV IEC contact ESD protected."+ "description": "RS-232 line data output for channel 2 (to remote RS-232 system). Swings ±5 V nominal, drives 3-kΩ load; ±15-kV IEC air-gap / ±8-kV IEC contact ESD protected." }, { "number": "8", "name": "RIN2", "type": "input",- "description": "RS-232 line data input for channel 2 (from remote RS-232 system). Accepts \u00b125 V input; \u00b115-kV IEC air-gap / \u00b18-kV IEC contact ESD protected."+ "description": "RS-232 line data input for channel 2 (from remote RS-232 system). Accepts ±25 V input; ±15-kV IEC air-gap / ±8-kV IEC contact ESD protected." }, { "number": "9",@@ -86,7 +86,7 @@ "number": "10", "name": "DIN2", "type": "input",- "description": "Logic-level (CMOS) data input for channel 2 (from UART). VIH \u2265 2 V at VCC = 3.3 V, \u2265 2.4 V at VCC = 5 V; VIL \u2264 0.8 V."+ "description": "Logic-level (CMOS) data input for channel 2 (from UART). VIH ≥ 2 V at VCC = 3.3 V, ≥ 2.4 V at VCC = 5 V; VIL ≤ 0.8 V." }, { "number": "11",@@ -104,13 +104,13 @@ "number": "13", "name": "RIN1", "type": "input",- "description": "RS-232 line data input for channel 1 (from remote RS-232 system). \u00b115-kV IEC air-gap / \u00b18-kV IEC contact ESD protected."+ "description": "RS-232 line data input for channel 1 (from remote RS-232 system). ±15-kV IEC air-gap / ±8-kV IEC contact ESD protected." }, { "number": "14", "name": "DOUT1", "type": "output",- "description": "RS-232 line data output for channel 1 (to remote RS-232 system). \u00b115-kV IEC air-gap / \u00b18-kV IEC contact ESD protected."+ "description": "RS-232 line data output for channel 1 (to remote RS-232 system). ±15-kV IEC air-gap / ±8-kV IEC contact ESD protected." }, { "number": "15",@@ -122,7 +122,7 @@ "number": "16", "name": "VCC", "type": "power_in",- "description": "Supply voltage input, 3.0 V to 5.5 V. Bypass with a minimum 1-\u00b5F capacitor to GND to meet the specified IEC 61000-4-2 rating."+ "description": "Supply voltage input, 3.0 V to 5.5 V. Bypass with a minimum 1-µF capacitor to GND to meet the specified IEC 61000-4-2 rating." } ], "provenance": {@@ -264,5 +264,8 @@ "docs/trs3232eipwr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }