component
TRS3227EIDB
Public Made by Adomby adom
Texas Instruments RS232 ICs, SSOP-16-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTRS3227EIDB
Texas Instruments · RS232 ICs · SSOP-16-208mil
TRS3227EIDB from Texas Instruments, in a SSOP-16-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | READY | output | Ready to transmit output, active high, enabled when V- goes below -3.5 V and the device is ready to transmit. |
| 2 | C1+ | passive | Positive terminal of voltage-doubler charge-pump capacitor. |
| 3 | V+ | power_out | Positive supply output voltage +2 × VCC generated by the charge pump. |
| 4 | C1− | passive | Negative terminal of voltage-doubler charge-pump capacitor. |
| 5 | C2+ | passive | Positive terminal of inverting charge-pump capacitor. |
| 6 | C2− | passive | Negative terminal of inverting charge-pump capacitor. |
| 7 | V− | power_out | Negative supply output voltage −2 × VCC generated by the charge pump. |
| 8 | RIN | input | RS-232 receiver input. |
| 9 | ROUT | output | CMOS receiver output. |
| 10 | INVALID | output | Valid signal detector output, active low; a logic high indicates that a valid RS-232 level is present on a receiver input. |
| 11 | DIN | input | CMOS driver input. |
| 12 | FORCEON | input | Force-on input, active high; drive high to override powerdown, keeping drivers and receivers on when FORCEOFF is high. |
| 13 | DOUT | output | RS-232 driver output. |
| 14 | GND | power_in | Ground. |
| 15 | VCC | power_in | 3 V to 5.5 V single-supply voltage input. |
| 16 | FORCEOFF | input | Force-off input, active low; drive low to shut down drivers, receivers, and charge pump, overriding auto-shutdown and FORCEON. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-16-208mil |
| Category | Interface |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
TRS3227EIDB - Footprint:
Package_SO:SSOP-16_5.3x6.2mm_P0.65mm - 3D model: SSOP-16-208mil (KiCad packages3D, STEP)
- 3D model files:
trs3227eidb-etched.step/trs3227eidb-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);trs3227eidb.step/trs3227eidb.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (18 pp, sha256
7db13a083d90c1a4, retrieved 2026-10-01, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).