3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTRS3221IPWR
Texas Instruments · RS232 ICs · TSSOP-16
TRS3221IPWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Low input enables the receiver ROUT output and high input sets ROUT to high impedance. |
| 2 | C1+ | passive | Positive terminal of the voltage-doubler charge-pump capacitor C1, which requires the capacitor values in Table 4. |
| 3 | V+ | power_out | 5.5-V supply generated by the charge pump, with a maximum magnitude of 7 V to GND. |
| 4 | C1- | passive | Negative terminal of the voltage-doubler charge-pump capacitor C1. |
| 5 | C2+ | passive | Positive terminal of the voltage-doubler charge-pump capacitor C2. |
| 6 | C2- | passive | Negative terminal of the voltage-doubler charge-pump capacitor C2. |
| 7 | V- | power_out | -5.5-V supply generated by the charge pump, with a maximum magnitude of 7 V to GND and a V+ to V- difference not exceeding 13 V. |
| 8 | RIN | input | RS-232 receiver input with an internal standard RS-232 load, rated ±25 V to GND and ESD protected to ±15 kV HBM. |
| 9 | ROUT | output | Receiver output, which goes to high impedance when EN is high and is driven high when RIN is open. |
| 10 | INVALID | output | Invalid status output that is low when all RIN inputs are unpowered (more than 30 µs) and high when a valid receiver input is present. |
| 11 | DIN | input | Driver input that must be held at a valid low or high logic level (0 to 5.5 V) and must not be left unconnected. |
| 12 | FORCEON | input | Automatic power-down control input that must be held at a valid low or high logic level and must not be left unconnected. |
| 13 | DOUT | output | RS-232 driver output rated ±13.2 V to GND and ESD protected to ±15 kV HBM. |
| 14 | GND | power_in | Ground reference for the device. |
| 15 | VCC | power_in | Supply voltage, 3 V to 5.5 V. |
| 16 | FORCEOFF | input | Automatic power-down control input that powers the driver off when low and must not be left unconnected. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | Interface |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
TRS3221IPWR - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
trs3221ipwr-etched.step/trs3221ipwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);trs3221ipwr.step/trs3221ipwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (26 pp, sha256
9b7f91bc979965ad, retrieved 2026-10-11, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).