component
TQP3M9037
Public Made by Adomby adom
Qorvo RF Amplifiers, DFN-8-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTQP3M9037
Qorvo · RF Amplifiers · DFN-8-EP(2x2)
TQP3M9037 from Qorvo, in a DFN-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No electrical connection; provide grounded land pads for PCB mounting integrity. |
| 2 | RF In | input | RF input pin; a DC block is required. |
| 3 | NC | unconnected | No electrical connection; provide grounded land pads for PCB mounting integrity. |
| 4 | NC | unconnected | No electrical connection; provide grounded land pads for PCB mounting integrity. |
| 5 | NC | unconnected | No electrical connection; provide grounded land pads for PCB mounting integrity. |
| 6 | Shut Down | input | A high voltage turns off the device; if the pin is not connected or is below 1 V the device operates in its normal ON state (VPD off-state 2.5 V min to 3.3 V typ, on-state 0 to 0.4 V, and VPD low limit 0 to 0.1 V and high limit 0.55 V min referenced to VDD per the datasheet limits). |
| 7 | RF Out / DCBias | output | RF output pin; DC bias must also be injected through an RF bias choke/inductor for operation. |
| 8 | NC | unconnected | No electrical connection; provide grounded land pads for PCB mounting integrity. |
| 9 | GND | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Qorvo |
| Package | DFN-8-EP(2x2) |
| Category | RF And Wireless |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage Temperature | -65 | 150 | °C | 2 | |||
| Supply Voltage (VDD) | VDD | 7 | V | 2 | |||
| RF Input Power, CW | 22 | dBm | 50Ω, T=25°C | 2 | |||
| Supply Voltage (VDD) | VDD | 3 | 4.2 | 5.25 | V | 2 | |
| Case Temperature | TCASE | -40 | 105 | °C | 2 | ||
| Junction Temperature | Tj | 190 | °C | for >106 hours MTTF | 2 | ||
| Operational Frequency Range | 700 | 6000 | MHz | 2 | |||
| Gain | 18.5 | 20 | 21.5 | dB | 2 | ||
| Input Return Loss | 10 | dB | 2 | ||||
| Output Return Loss | 11 | dB | 2 | ||||
| Noise Figure | 0.4 | 0.65 | dB | 2 | |||
| Output P1dB | 20 | dBm | 2 | ||||
| Output IP3 | 32 | 35 | dBm | Pout=+5 dBm/tone, Δf=1 MHz | 2 | ||
| Power Shutdown Control, On state | VPD | 0 | 0.4 | V | 2 | ||
| Power Shutdown Control, Off state (Power down) | VPD | 2.5 | 3.3 | V | 2 | ||
| Current IDD, On state | IDD | 40 | 70 | 90 | mA | 2 | |
| Current IDD, Off state (Power down) | IDD | 3 | 4 | mA | 2 | ||
| Shutdown pin current | ISD | 140 | µA | VPD ≥ +2.5 V | 2 | ||
| VPD Low-level voltage limit (Vlow) | VPD | 0 | 0.1 | V | 2 | ||
| VPD High-level voltage limit (Vhigh) | VPD | 0.55 | V | 2 | |||
| Switching Speed, Rise time (10% to 90%) | 116 | ns | 2 | ||||
| Switching Speed, Fall time (90% to 10%) | 340 | ns | 2 | ||||
| Thermal Resistance, channel to case | θjc | 53.4 | °C/W | channel to case | 2 |
CAD (KiCad official)
- Symbol:
TQP3M9037 - Footprint:
Package_DFN_QFN:DFN-8-1EP_2x2mm_P0.5mm_EP0.6x1.2mm - 3D model: DFN-8-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
tqp3m9037-etched.step/tqp3m9037-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tqp3m9037.step/tqp3m9037.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Qorvo datasheet (16 pp, sha256
8abd961d464bf5d1, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).