TQL9092

{
  "slug": "tql9092",
  "version": "0.1.0",
  "type": "component",
  "description": "Qorvo Low Noise Amplifiers (LNA) - RF, DFN-8-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "rf and wireless",
    "tql9092",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tql9092.kicad_sym",
    "tql9092.kicad_mod",
    "tql9092.glb",
    "tql9092.step",
    "tql9092.lbr",
    "docs/hero.png",
    "docs/tql9092-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tql9092-hero.glb",
    "tql9092-hero.overlay.json",
    "tql9092-etched.glb"
  ],
  "component": {
    "mpn": "TQL9092",
    "manufacturer": "Qorvo",
    "package": "DFN-8-EP(2x2)",
    "pin_count": 9,
    "category": "RF And Wireless",
    "subcategory": "Low Noise Amplifiers (LNA) - RF",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588893559638937600",
    "parts": {
      "symbol": "tql9092.kicad_sym",
      "footprint": "tql9092.kicad_mod",
      "model_3d": "tql9092-hero.glb",
      "model_3d_plain": "tql9092-etched.glb",
      "model_3d_step": "tql9092-etched.step",
      "model_3d_step_plain": "tql9092.step",
      "lbr": "tql9092.lbr"
    },
    "distributor_links": {
      "lcsc": "C415716"
    },
    "distributor_check": {
      "checked_at": "2026-10-17T22:45:31Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "Vbias",
        "type": "input",
        "description": "Sets the Icq bias point for the device (bias resistor R4 to this pin is used to set current, e.g. 5.1K gives about 65 mA at VDD=5 V)."
      },
      {
        "number": "2",
        "name": "RF In",
        "type": "input",
        "description": "RF input pin, and a DC block is required on this pin."
      },
      {
        "number": "3",
        "name": "NC",
        "type": "unconnected",
        "description": "No electrical connection; provide grounded land pads for PCB mounting integrity."
      },
      {
        "number": "4",
        "name": "NC",
        "type": "unconnected",
        "description": "No electrical connection; provide grounded land pads for PCB mounting integrity."
      },
      {
        "number": "5",
        "name": "NC",
        "type": "unconnected",
        "description": "No electrical connection; provide grounded land pads for PCB mounting integrity."
      },
      {
        "number": "6",
        "name": "Shut Down",
        "type": "input",
        "description": "A voltage above 1.17 V turns the device off; pulling the pin to ground or driving it below 0.63 V keeps the LNA in the ON state."
      },
      {
        "number": "7",
        "name": "RF Out / DCBias",
        "type": "output",
        "description": "RF output pin, and DC bias must also be injected through an RF bias choke/inductor for operation."
      },
      {
        "number": "8",
        "name": "NC",
        "type": "unconnected",
        "description": "No electrical connection; provide grounded land pads for PCB mounting integrity."
      },
      {
        "number": "9",
        "name": "GND",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Datasheet lists these as 'No Connect or GND' (page 1) and as 'No electrical connection' with grounde; The backside paddle is not numbered on the package; 'EP' is a label I assigned. The datasheet calls ; Vbias is typed as input, but the datasheet describes it as a bias-setting pin via an external resist",
          "exposed pad 9 added from the footprint",
          "dropped thermal pad ['EP'] absent from footprint"
        ],
        "pages_sent": 9,
        "cost_usd": 0.0625,
        "at": "2026-10-17T22:43:15"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588893559638937600",
        "pages": 9,
        "sha256": "a4aeb8b029caabdb",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tql9092.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.0,
          1.98,
          0.92
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "914cd301aa2efff54a7c18fe40fe21c25b277d6109b6cb10afb266387128ddd0",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tql9092-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.0,
          1.98,
          0.92
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f4763d05ffe6087f317d97918384f4d730b6b4c1c66baa05b8ef5589ee314798",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}