Generated by kicad-footprint-generator · KiCad file format 20260206
TPT4032-SO3R
3PEAK · RS-485 / RS-422 ICs · SOP-16
TPT4032-SO3R from 3PEAK, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1B | input | Inverting RS422/RS485 differential bus input of receiver 1, accepting a -7 V to +12 V common-mode range with ±200 mV differential sensitivity. |
| 2 | 1A | input | Non-inverting RS422/RS485 differential bus input of receiver 1, accepting a -7 V to +12 V common-mode range with ±200 mV differential sensitivity. |
| 3 | 1R | output | Logic-level output of receiver 1, which goes to high impedance when the receiver is disabled by G/̄G. |
| 4 | G | input | Active-high receiver enable input for all four receivers, with VIH minimum 2.0 V and VIL maximum 0.8 V. |
| 5 | 2R | output | Logic-level output of receiver 2, which goes to high impedance when the receiver is disabled by G/̄G. |
| 6 | 2A | input | Non-inverting RS422/RS485 differential bus input of receiver 2, accepting a -7 V to +12 V common-mode range with ±200 mV differential sensitivity. |
| 7 | 2B | input | Inverting RS422/RS485 differential bus input of receiver 2, accepting a -7 V to +12 V common-mode range with ±200 mV differential sensitivity. |
| 8 | GND | power_in | Ground reference for the device. |
| 9 | 3B | input | Inverting RS422/RS485 differential bus input of receiver 3, accepting a -7 V to +12 V common-mode range with ±200 mV differential sensitivity. |
| 10 | 3A | input | Non-inverting RS422/RS485 differential bus input of receiver 3, accepting a -7 V to +12 V common-mode range with ±200 mV differential sensitivity. |
| 11 | 3R | output | Logic-level output of receiver 3, which goes to high impedance when the receiver is disabled by G/̄G. |
| 12 | /G | input | Active-low receiver enable input for all four receivers; the receivers are enabled when this pin is low, with VIH minimum 2.0 V and VIL maximum 0.8 V. |
| 13 | 4R | output | Logic-level output of receiver 4, which goes to high impedance when the receiver is disabled by G/̄G. |
| 14 | 4A | input | Non-inverting RS422/RS485 differential bus input of receiver 4, accepting a -7 V to +12 V common-mode range with ±200 mV differential sensitivity. |
| 15 | 4B | input | Inverting RS422/RS485 differential bus input of receiver 4, accepting a -7 V to +12 V common-mode range with ±200 mV differential sensitivity. |
| 16 | VCC | power_in | Supply pin; the datasheet specifies a 3.0 V to 5.5 V supply, with 5.0 V recommended for best performance at high data rates up to 50 Mbps. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | 3PEAK |
| Package | SOP-16 |
| Category | Interface |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 3 | 5.5 | V | 5 | ||
| High-level input voltage (receiver enable inputs) | VIH | 2 | V | 5 | |||
| Low-level input voltage (receiver enable inputs) | VIL | 0 | 0.8 | V | 5 | ||
| Common-mode input voltage | VCM | -7 | 12 | V | 5 | ||
| Operating ambient temperature | TA | -40 | 125 | °C | 5 | ||
| Supply voltage | VCC | -0.5 | 7 | V | 5 | ||
| Input voltage (G, /G) | VI | -0.3 | V | 5 | |||
| Common-mode input voltage | VCM | -10 | 15 | V | 5 | ||
| Output voltage | VO | -0.5 | V | 5 | |||
| Input or output clamp current | IIK, IOK | -20 | 20 | mA | 5 | ||
| Output current | IO | -20 | 20 | mA | 5 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Enable-input clamp voltage | VIK | -1.5 | -0.8 | V | 5.0V table: IO = 18 mA | 7 | |
| Logic input high voltage G, /G | VIH | 2 | V | 5.0V table: G, /G | 7 | ||
| Logic input low voltage G, /G | VIL | 0.8 | V | 5.0V table: G, /G | 7 | ||
| High-level output voltage | VOH | 3.8 | 4.89 | V | 5.0V table: IOH = -6mA, VID = +200mV | 7 | |
| Low-level output voltage | VOL | 0.11 | 0.4 | V | 5.0V table: IOL= 6mA, VID = -200mV | 7 | |
| Differential input high-threshold voltage, positive | VIT+ | 0.2 | V | 5.0V table: VI = -7 V to 12 V | 7 | ||
| Differential input low-threshold voltage, negative | VIT- | -0.2 | V | 5.0V table: VI = -7 V to 12 V | 7 | ||
| Input resistance | Rin | 96 | 176 | kΩ | 5.0V table: VI = -7V to 12V, one input to ground | 7 | |
| Line input current (VI=12V) | II (A/B) | 48 | 150 | uA | 5.0V table: VI=12V, other input at -7V to 12V | 7 | |
| Line input current (VI=-7V) | II (A/B) | 61 | 150 | uA | 5.0V table: VI=-7V, other input at -7V to 12V | 7 | |
| High level enable current | IH(G,/G) | 3.2 | 10 | uA | 5.0V table: VI=VCC | 7 | |
| Low level enable current | IL(G,/G) | -10 | -2.6 | uA | 5.0V table: VI=GND | 7 | |
| OFF state (high-impedance-state) output current | IOZ | -1 | 0 | 1 | uA | 5.0V table: Vo=0V or VCC | 7 |
| Short-circuit output current | IOS | -180 | -103 | mA | 5.0V table: VCC=MAX, Vo=0V, VID>=0.2V | 7 | |
| Quiescent supply current | ICC | 6.5 | 10 | mA | 5.0V table: G,/G=VCC or GND, 100 ohm line inputs resistor | 7 | |
| Propagation delay time, low-to-high-level output | tPLH | 16 | 30 | ns | 5.0V table: SW is open, see Figure 1, CL=15pF | 7 | |
| Propagation delay time, high-to-low-level output | tPHL | 19 | 30 | ns | 5.0V table: SW is open, see Figure 1, CL=15pF | 7 | |
| Pulse skew time (/tPLH, tPHL/) | tsk(p) | 3 | 7 | ns | 5.0V table: SW is open, see Figure 1 | 7 | |
| Differential output rise time | tr | 3.7 | 11 | ns | 5.0V table: SW is open, see Figure 1, CL=15pF | 7 | |
| Differential output fall time | tf | 2.2 | 11 | ns | 5.0V table: SW is open, see Figure 1, CL=15pF | 7 | |
| Output enable time to high level | tPZH | 10 | 40 | ns | 5.0V table: SW is closed, see Figure 3, CL=50pF | 7 | |
| Output enable time to low level | tPZL | 13 | 40 | ns | 5.0V table: SW is closed, see Figure 3, CL=50pF | 7 | |
| Output disable time from high level | tPHZ | 27 | 40 | ns | 5.0V table: SW is closed, see Figure 3, CL=50pF | 7 | |
| Output disable time from low level | tPLZ | 24 | 40 | ns | 5.0V table: SW is closed, see Figure 3, CL=50pF | 7 | |
| Enable-input clamp voltage | VIK | -1.5 | -0.8 | V | 3.3V table: IO = 18 mA | 8 | |
| Logic input high voltage G, /G | VIH | 2 | V | 3.3V table: G, /G | 8 | ||
| Logic input low voltage G, /G | VIL | 0.8 | V | 3.3V table: G, /G | 8 | ||
| High-level output voltage | VOH | 2.7 | 3.47 | V | 3.3V table: IOH = -6mA, VID = +200mV | 8 | |
| Low-level output voltage | VOL | 0.16 | 0.4 | V | 3.3V table: IOL= 6mA, VID = -200mV | 8 | |
| Differential input high-threshold voltage, positive | VIT+ | 0.2 | mV | 3.3V table: VI = -7 V to 12 V | 8 | ||
| Differential input low-threshold voltage, negative | VIT- | -0.2 | mV | 3.3V table: VI = -7 V to 12 V | 8 | ||
| Input resistance | Rin | 96 | 176 | kΩ | 3.3V table: VI = -7V to 12V, one input to ground | 8 | |
| Line input current (VI=12V) | II (A/B) | 50 | 150 | uA | 3.3V table: VI=12V, other input at -7V to 12V | 8 | |
| Line input current (VI=-7V) | II (A/B) | 54 | 150 | uA | 3.3V table: VI=-7V, other input at -7V to 12V | 8 | |
| High level enable current | IH(G,/G) | 2.1 | 5.5 | uA | 3.3V table: VI=VCC | 8 | |
| Low level enable current | IL(G,/G) | 2 | 5.5 | uA | 3.3V table: VI=GND | 8 | |
| OFF state (high-impedance-state) output current | IOZ | -1 | 0 | 1 | uA | 3.3V table: Vo=0V or VCC | 8 |
| Short-circuit output current | IOS | -85 | -58 | mA | 3.3V table: VCC=MAX, Vo=0V, VID>=0.2V | 8 | |
| Quiescent supply current | ICC | 6.2 | 8 | mA | 3.3V table: G,/G=VCC or GND, 100 ohm line inputs resistor | 8 | |
| Propagation delay time, low-to-high-level output | tPLH | 22 | 30 | ns | 3.3V table: SW is open, see Figure 1, CL=15pF | 9 | |
| Propagation delay time, high-to-low-level output | tPHL | 22 | 30 | ns | 3.3V table: SW is open, see Figure 1, CL=15pF | 9 | |
| Pulse skew time (/tPLH, tPHL/) | tsk(p) | 1.3 | 6 | ns | 3.3V table: SW is open, see Figure 1 | 9 | |
| Differential output rise time | tr | 3.3 | 11 | ns | 3.3V table: SW is open, see Figure 1, CL=15pF | 9 | |
| Differential output fall time | tf | 3.4 | 11 | ns | 3.3V table: SW is open, see Figure 1, CL=15pF | 9 | |
| Output enable time to high level | tPZH | 14 | 40 | ns | 3.3V table: SW is closed, see Figure 3, CL=50pF | 9 | |
| Output enable time to low level | tPZL | 13 | 40 | ns | 3.3V table: SW is closed, see Figure 3, CL=50pF | 9 | |
| Output disable time from high level | tPHZ | 27 | 40 | ns | 3.3V table: SW is closed, see Figure 3, CL=50pF | 9 | |
| Output disable time from low level | tPLZ | 24 | 40 | ns | 3.3V table: SW is closed, see Figure 3, CL=50pF | 9 |
CAD (KiCad official)
- Symbol:
TPT4032-SO3R - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files:
tpt4032-so3r-etched.step/tpt4032-so3r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tpt4032-so3r.step/tpt4032-so3r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: 3PEAK datasheet (18 pp, sha256
71817e57e07cd961, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).