Loads on click. Unloads only if this page sits in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

PCB Footprint

Open full view ↗
Loads on click. Unloads only if this page sits in the background.
Loads on click. Unloads only if this page sits in the background.
Download PDF
Contents

README

markdown

TPSY6288CAAC

TECH PUBLIC · Power Distribution Switches · SOT-23-5

TPSY6288CAAC from TECH PUBLIC, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VOUT power_out Output Voltage Pin; output follows VIN when enabled; discharged to GND through an internal resistor when ENB is high or EN is low.
2 GND power_in Ground reference pin.
3 OCB output Open-drain Fault Flag Output; goes low after a 12 ms deglitch when a current-limit or over-temperature condition is detected; requires external pull-up resistor.
4 EN input Enable Input; logic-high (≥1.3 V) enables the device, logic-low (<0.8 V) disables it; pin must not be left floating; compatible with TTL and CMOS levels.
5 VIN power_in Power Supply Input; connect to external DC supply in the range 2.5 V to 5.5 V.

Key specifications

Parameter Value
Manufacturer TECH PUBLIC
Package SOT-23-5
Category Power Management (PMIC)
Pins 5

CAD (KiCad official)

  • Symbol: TPSY6288CAAC
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: tpsy6288caac-etched.step / tpsy6288caac-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tpsy6288caac.step / tpsy6288caac.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TECH PUBLIC datasheet (8 pp, sha256 4f1d9a80784fa375, retrieved 2026-09-22, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-sonnet-4-6 (vision), consensus claude-opus-4-7 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF