main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs tps92691pwpr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tps92691pwpr: viewers · Ray
package.json tps92691pwpr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tps92691pwpr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/tps92691pwpr · Ray
tps92691pwpr-etched.fit.json tps92691pwpr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps92691pwpr-etched.glb tps92691pwpr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps92691pwpr-etched.step tps92691pwpr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps92691pwpr.glb Publish 0.1.0 · Ray
tps92691pwpr.kicad_mod Publish 0.1.0 · Ray
tps92691pwpr.kicad_sym Publish 0.1.0 · Ray
tps92691pwpr.lbr Publish 0.1.0 · Ray
tps92691pwpr.step Publish 0.1.0 · Ray

TPS92691PWPR

Texas Instruments · LED Drivers · HTSSOP-16-EP

TPS92691PWPR from Texas Instruments, in a HTSSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Input supply for the internal VCC regulator; bypass with 100-nF capacitor to GND located close to the controller.
2 SS bidirectional Soft-start programming pin accepting capacitor to AGND for extended start-up time or shorted to GND to disable switching.
3 RT/SYNC bidirectional Oscillator frequency programming pin accepting resistor to AGND or external clock synchronization through 100-nF series capacitor.
4 PWM input PWM dimming input; driving below 2.3 V (typ) turns off switching and sets DDRV to ground; duty cycle controls average LED current.
5 COMP bidirectional Transconductance error amplifier output requiring compensation network connected to achieve desired closed-loop response.
6 IADJ input LED current reference input accepting 0 V to 2.25 V for analog dimming; connect to VCC via 100 kΩ resistor to set 2.42 V internal reference.
7 IMON output LED current report pin providing output voltage VIMON = 14 × ILED × RCS; bypass with 1-nF ceramic capacitor to AGND.
8 AGND power_in Analog ground return for internal voltage reference and analog circuit; connect to circuit ground GND to complete return path.
9 CSN input Current sense amplifier negative input (-); connect directly to negative node of LED current sense resistor RCS.
10 CSP input Current sense amplifier positive input (+); connect directly to positive node of LED current sense resistor RCS.
11 DDRV output Series dimming FET gate driver output capable of sinking and sourcing ±500 mA peak current; connect to low-side N-channel MOSFET or level-shifted P-channel MOSFET.
12 OVP input Hysteretic overvoltage protection input with 1.24 V threshold; connect resistor divider from output voltage to set OVP threshold and hysteresis.
13 PGND power_in Power ground connection pin for internal N-channel MOSFET gate drivers; connect to circuit ground GND to complete return path.
14 IS input Switch current sense input; connect to switch current sense resistor RIS in the source of the N-channel MOSFET with 525 mV limit threshold.
15 GATE output N-channel MOSFET gate driver output capable of sourcing/sinking ±500 mA peak current; connect to gate of external switching N-channel MOSFET.
16 VCC power_in VCC bias supply pin providing 7.5 V regulated output; locally decouple to PGND using 2.2-4.7 µF ceramic capacitor located close to controller.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package HTSSOP-16-EP
Category LED Drivers
Pins 17

CAD (KiCad official)

  • Symbol: TPS92691PWPR
  • Footprint: Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm
  • 3D model: HTSSOP-16-EP (KiCad packages3D, STEP)
  • 3D model files: tps92691pwpr-etched.step / tps92691pwpr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps92691pwpr.step / tps92691pwpr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (46 pp, sha256 fe3abc1c8fa38cad, retrieved 2026-09-27, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF