← Commit history

Initial commit: component/tps92691pwpr

Ray ·12e059c8d1 ·
2 files changed +267
README.mdadded+54
@@ -0,0 +1,54 @@+# TPS92691PWPR++**Texas Instruments** · LED Drivers · HTSSOP-16-EP++TPS92691PWPR from Texas Instruments, in a HTSSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VIN | power_in | Input supply for the internal VCC regulator; bypass with 100-nF capacitor to GND located close to the controller. |+| 2 | SS | bidirectional | Soft-start programming pin accepting capacitor to AGND for extended start-up time or shorted to GND to disable switching. |+| 3 | RT/SYNC | bidirectional | Oscillator frequency programming pin accepting resistor to AGND or external clock synchronization through 100-nF series capacitor. |+| 4 | PWM | input | PWM dimming input; driving below 2.3 V (typ) turns off switching and sets DDRV to ground; duty cycle controls average LED current. |+| 5 | COMP | bidirectional | Transconductance error amplifier output requiring compensation network connected to achieve desired closed-loop response. |+| 6 | IADJ | input | LED current reference input accepting 0 V to 2.25 V for analog dimming; connect to VCC via 100 kΩ resistor to set 2.42 V internal reference. |+| 7 | IMON | output | LED current report pin providing output voltage VIMON = 14 × ILED × RCS; bypass with 1-nF ceramic capacitor to AGND. |+| 8 | AGND | power_in | Analog ground return for internal voltage reference and analog circuit; connect to circuit ground GND to complete return path. |+| 9 | CSN | input | Current sense amplifier negative input (-); connect directly to negative node of LED current sense resistor RCS. |+| 10 | CSP | input | Current sense amplifier positive input (+); connect directly to positive node of LED current sense resistor RCS. |+| 11 | DDRV | output | Series dimming FET gate driver output capable of sinking and sourcing ±500 mA peak current; connect to low-side N-channel MOSFET or level-shifted P-channel MOSFET. |+| 12 | OVP | input | Hysteretic overvoltage protection input with 1.24 V threshold; connect resistor divider from output voltage to set OVP threshold and hysteresis. |+| 13 | PGND | power_in | Power ground connection pin for internal N-channel MOSFET gate drivers; connect to circuit ground GND to complete return path. |+| 14 | IS | input | Switch current sense input; connect to switch current sense resistor RIS in the source of the N-channel MOSFET with 525 mV limit threshold. |+| 15 | GATE | output | N-channel MOSFET gate driver output capable of sourcing/sinking ±500 mA peak current; connect to gate of external switching N-channel MOSFET. |+| 16 | VCC | power_in | VCC bias supply pin providing 7.5 V regulated output; locally decouple to PGND using 2.2-4.7 µF ceramic capacitor located close to controller. |+| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | HTSSOP-16-EP |+| Category | LED Drivers |+| Pins | 17 |++## CAD (KiCad official)++- Symbol: `TPS92691PWPR`+- Footprint: `Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm`+- 3D model: HTSSOP-16-EP (KiCad packages3D, STEP)+- 3D model files: `tps92691pwpr-etched.step` / `tps92691pwpr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps92691pwpr.step` / `tps92691pwpr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps92691) (46 pp, sha256 `fe3abc1c8fa38cad`, retrieved 2026-09-27, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps92691pwpr-datasheet.pdf)
page.jsonadded+213
@@ -0,0 +1,213 @@+{+  "slug": "tps92691pwpr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments LED Drivers, HTSSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "led drivers",+    "tps92691pwpr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tps92691pwpr.kicad_sym",+    "tps92691pwpr.kicad_mod",+    "tps92691pwpr.glb",+    "tps92691pwpr.step",+    "tps92691pwpr.lbr",+    "docs/hero.png",+    "docs/tps92691pwpr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TPS92691PWPR",+    "manufacturer": "Texas Instruments",+    "package": "HTSSOP-16-EP",+    "pin_count": 17,+    "category": "LED Drivers",+    "subcategory": "LED Drivers",+    "datasheet": "https://www.ti.com/cn/lit/gpn/tps92691",+    "parts": {+      "symbol": "tps92691pwpr.kicad_sym",+      "footprint": "tps92691pwpr.kicad_mod",+      "model_3d": "tps92691pwpr-etched.glb",+      "model_3d_plain": "tps92691pwpr.glb",+      "model_3d_step": "tps92691pwpr-etched.step",+      "model_3d_step_plain": "tps92691pwpr.step",+      "lbr": "tps92691pwpr.lbr"+    },+    "distributor_links": {+      "lcsc": "C138394",+      "digikey": "296-43371-2-ND",+      "mouser": "595-TPS92691PWPR"+    },+    "distributor_check": {+      "checked_at": "2026-09-27T09:18:59Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-43371-2-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "595-TPS92691PWPR",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "VIN",+        "type": "power_in",+        "description": "Input supply for the internal VCC regulator; bypass with 100-nF capacitor to GND located close to the controller."+      },+      {+        "number": "2",+        "name": "SS",+        "type": "bidirectional",+        "description": "Soft-start programming pin accepting capacitor to AGND for extended start-up time or shorted to GND to disable switching."+      },+      {+        "number": "3",+        "name": "RT/SYNC",+        "type": "bidirectional",+        "description": "Oscillator frequency programming pin accepting resistor to AGND or external clock synchronization through 100-nF series capacitor."+      },+      {+        "number": "4",+        "name": "PWM",+        "type": "input",+        "description": "PWM dimming input; driving below 2.3 V (typ) turns off switching and sets DDRV to ground; duty cycle controls average LED current."+      },+      {+        "number": "5",+        "name": "COMP",+        "type": "bidirectional",+        "description": "Transconductance error amplifier output requiring compensation network connected to achieve desired closed-loop response."+      },+      {+        "number": "6",+        "name": "IADJ",+        "type": "input",+        "description": "LED current reference input accepting 0 V to 2.25 V for analog dimming; connect to VCC via 100 kΩ resistor to set 2.42 V internal reference."+      },+      {+        "number": "7",+        "name": "IMON",+        "type": "output",+        "description": "LED current report pin providing output voltage VIMON = 14 × ILED × RCS; bypass with 1-nF ceramic capacitor to AGND."+      },+      {+        "number": "8",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground return for internal voltage reference and analog circuit; connect to circuit ground GND to complete return path."+      },+      {+        "number": "9",+        "name": "CSN",+        "type": "input",+        "description": "Current sense amplifier negative input (-); connect directly to negative node of LED current sense resistor RCS."+      },+      {+        "number": "10",+        "name": "CSP",+        "type": "input",+        "description": "Current sense amplifier positive input (+); connect directly to positive node of LED current sense resistor RCS."+      },+      {+        "number": "11",+        "name": "DDRV",+        "type": "output",+        "description": "Series dimming FET gate driver output capable of sinking and sourcing ±500 mA peak current; connect to low-side N-channel MOSFET or level-shifted P-channel MOSFET."+      },+      {+        "number": "12",+        "name": "OVP",+        "type": "input",+        "description": "Hysteretic overvoltage protection input with 1.24 V threshold; connect resistor divider from output voltage to set OVP threshold and hysteresis."+      },+      {+        "number": "13",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground connection pin for internal N-channel MOSFET gate drivers; connect to circuit ground GND to complete return path."+      },+      {+        "number": "14",+        "name": "IS",+        "type": "input",+        "description": "Switch current sense input; connect to switch current sense resistor RIS in the source of the N-channel MOSFET with 525 mV limit threshold."+      },+      {+        "number": "15",+        "name": "GATE",+        "type": "output",+        "description": "N-channel MOSFET gate driver output capable of sourcing/sinking ±500 mA peak current; connect to gate of external switching N-channel MOSFET."+      },+      {+        "number": "16",+        "name": "VCC",+        "type": "power_in",+        "description": "VCC bias supply pin providing 7.5 V regulated output; locally decouple to PGND using 2.2-4.7 µF ceramic capacitor located close to controller."+      },+      {+        "number": "17",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "exposed pad 17 added from the footprint",+          "dropped thermal pad ['EP'] absent from footprint"+        ],+        "pages_sent": 46,+        "cost_usd": 0.3867,+        "at": "2026-09-27T09:18:41"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/tps92691",+        "pages": 46,+        "sha256": "fe3abc1c8fa38cad",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 17,+        "described": 17,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file