main
Ray
Publish 0.1.0
c12342d
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476
{
"slug": "tps92661qphprq1",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments LED Drivers, TQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"display modules - led drivers - display drivers",
"tps92661qphprq1",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"tps92661qphprq1.kicad_sym",
"tps92661qphprq1.kicad_mod",
"tps92661qphprq1.glb",
"tps92661qphprq1.step",
"tps92661qphprq1.lbr",
"docs/hero.png",
"docs/tps92661qphprq1-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"tps92661qphprq1-hero.glb",
"tps92661qphprq1-hero.overlay.json",
"tps92661qphprq1-etched.glb"
],
"component": {
"mpn": "TPS92661QPHPRQ1",
"manufacturer": "Texas Instruments",
"package": "TQFP-48(7x7)",
"pin_count": 48,
"category": "Display Modules / LED Drivers / Display Drivers",
"subcategory": "LED Drivers",
"datasheet": "https://www.ti.com/cn/lit/gpn/tps92661-q1",
"parts": {
"symbol": "tps92661qphprq1.kicad_sym",
"footprint": "tps92661qphprq1.kicad_mod",
"model_3d": "tps92661qphprq1-hero.glb",
"model_3d_plain": "tps92661qphprq1-etched.glb",
"model_3d_step": "tps92661qphprq1-etched.step",
"model_3d_step_plain": "tps92661qphprq1.step",
"lbr": "tps92661qphprq1.lbr"
},
"distributor_links": {
"lcsc": "C702357",
"digikey": "296-41008-2-ND",
"mouser": "595-TPS92661QPHPRQ1"
},
"distributor_check": {
"checked_at": "2026-10-29T02:00:37Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-41008-2-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "595-TPS92661QPHPRQ1",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "CPP",
"type": "power_out",
"description": "Charge pump output that must be bypassed to LED12 with a ceramic capacitor of at least 0.1 µF, and it supplies the gate drive for the internal floating switches (CPP to GND rated -0.3 V to 67 V)."
},
{
"number": "2",
"name": "NC",
"type": "unconnected",
"description": "No connection."
},
{
"number": "3",
"name": "GND",
"type": "power_in",
"description": "Device system ground; all GND pins must be tied to system ground for proper operation."
},
{
"number": "4",
"name": "EN",
"type": "input",
"description": "Active-high enable; the device is in reset when EN is low, and it may be tied to VCC or VIN for enable at power-up (VIH 1.9 V min, VIL 0.8 V max)."
},
{
"number": "5",
"name": "GND",
"type": "power_in",
"description": "Device system ground; all GND pins must be tied to system ground for proper operation."
},
{
"number": "6",
"name": "SYNC",
"type": "bidirectional",
"description": "Synchronization pin that resets the internal PWM counter when driven high and may be left unconnected, since it is internally pulled down; only one device should drive it."
},
{
"number": "7",
"name": "GND",
"type": "power_in",
"description": "Device system ground; all GND pins must be tied to system ground for proper operation."
},
{
"number": "8",
"name": "CLK",
"type": "input",
"description": "Externally provided primary system clock for the UART and PWM hardware, rated up to 16 MHz with a 40% to 60% duty cycle."
},
{
"number": "9",
"name": "GND",
"type": "power_in",
"description": "Device system ground; all GND pins must be tied to system ground for proper operation."
},
{
"number": "10",
"name": "TX",
"type": "bidirectional",
"description": "UART transmit output (tri-state) that requires a 100 kΩ pull-up resistor to avoid false start conditions at the microcontroller."
},
{
"number": "11",
"name": "GND",
"type": "power_in",
"description": "Device system ground; all GND pins must be tied to system ground for proper operation."
},
{
"number": "12",
"name": "RX",
"type": "bidirectional",
"description": "UART receive input, a feed-through pin that operates at CLK/16 bit rate and connects to the MCU TX output and the next device's RX pin."
},
{
"number": "13",
"name": "VCC",
"type": "power_out",
"description": "Output of the on-board 3.3 V LDO that requires a ceramic output capacitor of 0.1 µF or greater; tie to VIN for 5 V microcontroller systems."
},
{
"number": "14",
"name": "VIN",
"type": "power_in",
"description": "5 V primary power supply input (4.5 V to 5.5 V) that should be bypassed with a ceramic capacitor of at least 0.1 µF."
},
{
"number": "15",
"name": "ADR1",
"type": "input",
"description": "Second bit of the device address, to be tied to VIN or GND."
},
{
"number": "16",
"name": "ADR2",
"type": "input",
"description": "Most significant bit of the device address, to be tied to VIN or GND."
},
{
"number": "17",
"name": "NC",
"type": "unconnected",
"description": "No connection."
},
{
"number": "18",
"name": "NC",
"type": "unconnected",
"description": "No connection."
},
{
"number": "19",
"name": "NC",
"type": "unconnected",
"description": "No connection."
},
{
"number": "20",
"name": "NC",
"type": "unconnected",
"description": "No connection."
},
{
"number": "21",
"name": "NC",
"type": "unconnected",
"description": "No connection."
},
{
"number": "22",
"name": "ADR0",
"type": "input",
"description": "Least significant bit of the device address, to be tied to VIN or GND."
},
{
"number": "23",
"name": "VIN",
"type": "power_in",
"description": "5 V primary power supply input (4.5 V to 5.5 V) that should be bypassed with a ceramic capacitor of at least 0.1 µF."
},
{
"number": "24",
"name": "GND",
"type": "power_in",
"description": "Device system ground; all GND pins must be tied to system ground for proper operation."
},
{
"number": "25",
"name": "RX",
"type": "bidirectional",
"description": "UART receive input, a feed-through pin that operates at CLK/16 bit rate and connects to the MCU TX output and the next device's RX pin."
},
{
"number": "26",
"name": "GND",
"type": "power_in",
"description": "Device system ground; all GND pins must be tied to system ground for proper operation."
},
{
"number": "27",
"name": "TX",
"type": "bidirectional",
"description": "UART transmit output (tri-state) that requires a 100 kΩ pull-up resistor to avoid false start conditions at the microcontroller."
},
{
"number": "28",
"name": "GND",
"type": "power_in",
"description": "Device system ground; all GND pins must be tied to system ground for proper operation."
},
{
"number": "29",
"name": "CLK",
"type": "input",
"description": "Externally provided primary system clock for the UART and PWM hardware, rated up to 16 MHz with a 40% to 60% duty cycle."
},
{
"number": "30",
"name": "GND",
"type": "power_in",
"description": "Device system ground; all GND pins must be tied to system ground for proper operation."
},
{
"number": "31",
"name": "SYNC",
"type": "bidirectional",
"description": "Synchronization pin that resets the internal PWM counter when driven high and may be left unconnected, since it is internally pulled down; only one device should drive it."
},
{
"number": "32",
"name": "GND",
"type": "power_in",
"description": "Device system ground; all GND pins must be tied to system ground for proper operation."
},
{
"number": "33",
"name": "EN",
"type": "input",
"description": "Active-high enable; the device is in reset when EN is low, and it may be tied to VCC or VIN for enable at power-up (VIH 1.9 V min, VIL 0.8 V max)."
},
{
"number": "34",
"name": "GND",
"type": "power_in",
"description": "Device system ground; all GND pins must be tied to system ground for proper operation."
},
{
"number": "35",
"name": "NC",
"type": "unconnected",
"description": "No connection."
},
{
"number": "36",
"name": "LED0",
"type": "output",
"description": "LED bypass switch output connected to the cathode of LED1 (LEDx to GND rated -0.3 V to 60 V)."
},
{
"number": "37",
"name": "LED1",
"type": "output",
"description": "LED bypass switch output connected to the anode of LED1 and the cathode of LED2 (LEDx to LED(x-1) rated -0.3 V to 7 V)."
},
{
"number": "38",
"name": "LED2",
"type": "output",
"description": "LED bypass switch output connected to the anode of LED2 and the cathode of LED3 (LEDx to LED(x-1) rated -0.3 V to 7 V)."
},
{
"number": "39",
"name": "LED3",
"type": "output",
"description": "LED bypass switch output connected to the anode of LED3 and the cathode of LED4 (LEDx to LED(x-1) rated -0.3 V to 7 V)."
},
{
"number": "40",
"name": "LED4",
"type": "output",
"description": "LED bypass switch output connected to the anode of LED4 and the cathode of LED5 (LEDx to LED(x-1) rated -0.3 V to 7 V)."
},
{
"number": "41",
"name": "LED5",
"type": "output",
"description": "LED bypass switch output connected to the anode of LED5 and the cathode of LED6 (LEDx to LED(x-1) rated -0.3 V to 7 V)."
},
{
"number": "42",
"name": "LED6",
"type": "output",
"description": "LED bypass switch output connected to the anode of LED6 and the cathode of LED7 (LEDx to LED(x-1) rated -0.3 V to 7 V)."
},
{
"number": "43",
"name": "LED7",
"type": "output",
"description": "LED bypass switch output connected to the anode of LED7 and the cathode of LED8 (LEDx to LED(x-1) rated -0.3 V to 7 V)."
},
{
"number": "44",
"name": "LED8",
"type": "output",
"description": "LED bypass switch output connected to the anode of LED8 and the cathode of LED9 (LEDx to LED(x-1) rated -0.3 V to 7 V)."
},
{
"number": "45",
"name": "LED9",
"type": "output",
"description": "LED bypass switch output connected to the anode of LED9 and the cathode of LED10 (LEDx to LED(x-1) rated -0.3 V to 7 V)."
},
{
"number": "46",
"name": "LED10",
"type": "output",
"description": "LED bypass switch output connected to the anode of LED10 and the cathode of LED11 (LEDx to LED(x-1) rated -0.3 V to 7 V)."
},
{
"number": "47",
"name": "LED11",
"type": "output",
"description": "LED bypass switch output connected to the anode of LED11 and the cathode of LED12 (LEDx to LED(x-1) rated -0.3 V to 7 V)."
},
{
"number": "48",
"name": "LED12",
"type": "output",
"description": "LED bypass switch output connected to the anode of LED12 (LEDx to GND rated -0.3 V to 60 V)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The Thermal Pad (exposed pad) is not a numbered pin in the datasheet; it is to be connected to syste; CPP is marked 'I' in the datasheet pin table but is described as the charge-pump output, so it was c; Pin descriptions are condensed to one sentence each and draw on absolute maximum and recommended ope"
],
"pages_sent": 12,
"cost_usd": 0.0938,
"at": "2026-10-29T02:00:20"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/gpn/tps92661-q1",
"pages": 53,
"sha256": "01209eeb0a7e6f85",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 48,
"described": 48,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "tps92661qphprq1.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
9.0,
9.0,
1.1
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "14ca7676e4932e92f0eca0c6d56ce3018cd28a2531204a70ab7bbacb3eeb3cf5",
"checked": "2026-10-29",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "tps92661qphprq1-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
9.0,
9.0,
1.1
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "d28c588557898a03c62d436a652c19bc88aa3a92ea47f833d88ffd6080100b2b",
"checked": "2026-10-29",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "PHP",
"source_page": 49,
"D": {
"nom_mm": 7.0,
"range_mm": [
null,
null
]
},
"E1": {
"nom_mm": 7.0,
"range_mm": [
null,
null
]
},
"e": {
"nom_mm": 0.5,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 1.2,
"range_mm": [
null,
1.2
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "tps92661qphprq1.step",
"verdict": "PASS",
"reasons": [
"height within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}