TPS92515QDGQTQ1

{
  "slug": "tps92515qdgqtq1",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments LED Drivers, MSOP-10-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "led drivers",
    "tps92515qdgqtq1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps92515qdgqtq1.kicad_sym",
    "tps92515qdgqtq1.kicad_mod",
    "tps92515qdgqtq1.glb",
    "tps92515qdgqtq1.step",
    "tps92515qdgqtq1.lbr",
    "docs/hero.png",
    "docs/tps92515qdgqtq1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps92515qdgqtq1-hero.glb",
    "tps92515qdgqtq1-hero.overlay.json"
  ],
  "component": {
    "mpn": "TPS92515QDGQTQ1",
    "manufacturer": "Texas Instruments",
    "package": "MSOP-10-EP",
    "pin_count": 11,
    "category": "LED Drivers",
    "subcategory": "LED Drivers",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps92515-q1",
    "parts": {
      "symbol": "tps92515qdgqtq1.kicad_sym",
      "footprint": "tps92515qdgqtq1.kicad_mod",
      "model_3d": "tps92515qdgqtq1-hero.glb",
      "model_3d_plain": "tps92515qdgqtq1.glb",
      "model_3d_step": "tps92515qdgqtq1-etched.step",
      "model_3d_step_plain": "tps92515qdgqtq1.step",
      "lbr": "tps92515qdgqtq1.lbr"
    },
    "distributor_links": {
      "lcsc": "C213557",
      "digikey": "296-44741-2-ND",
      "mouser": "595-TPS92515QDGQTQ1"
    },
    "distributor_check": {
      "checked_at": "2026-10-08T18:26:26Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-44741-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS92515QDGQTQ1",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "COFF",
        "type": "input",
        "description": "Connect a resistor from VOUT and a capacitor to GND to set the OFF-time."
      },
      {
        "number": "2",
        "name": "VCC",
        "type": "power_out",
        "description": "5-V regulator output; use a decoupling capacitor from VCC to ground (see the VCC capacitor selection section)."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "4",
        "name": "BOOT",
        "type": "input",
        "description": "Connect a ceramic capacitor between BOOT and SW and a diode from VCC to BOOT to power the high-side FET drive circuitry."
      },
      {
        "number": "5",
        "name": "SW",
        "type": "output",
        "description": "Internal FET source; connect to the output inductor."
      },
      {
        "number": "6",
        "name": "DRN",
        "type": "input",
        "description": "Internal FET drain; connect to the CSN node."
      },
      {
        "number": "7",
        "name": "CSN",
        "type": "input",
        "description": "Current sense negative input; connect the current sense resistor from VIN to CSN for high-side current sense control."
      },
      {
        "number": "8",
        "name": "VIN",
        "type": "power_in",
        "description": "Connect to input voltage (recommended operating VIN is 5.5 V to 42 V for TPS92515x and 5.5 V to 65 V for TPS92515HVx); VIN is also the current sense positive input."
      },
      {
        "number": "9",
        "name": "PWM",
        "type": "input",
        "description": "PWM dimming input; output current is PWM dimmed from the maximum analog controlled level, and it should be connected to VCC if not used."
      },
      {
        "number": "10",
        "name": "IADJ",
        "type": "input",
        "description": "Output current adjust; connect to an external divider or reference, or tie to VCC, with the internal clamp at 2.4 V."
      },
      {
        "number": "11",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The thermal pad (labelled PAD on the drawing) is not a numbered pin in the datasheet, so it is not l; The pin table is shared by the whole TPS92515 family (TPS92515, -Q1, HV, HV-Q1) and the DGQ package.; Pin 1 description refers to 'VOUT', which does not appear as a pin name in the pin table. It is copi",
          "exposed pad 11 added from the footprint"
        ],
        "pages_sent": 12,
        "cost_usd": 0.076,
        "at": "2026-10-08T18:26:06"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps92515-q1",
        "pages": 41,
        "sha256": "b6e415ec88013b0b",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 11,
        "described": 11,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps92515qdgqtq1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "18605eed706df7bb9674107abe7aa36e0ba163a09c21a2cee6c75cfa291b7937",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps92515qdgqtq1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "da89c512626fd9849b2e7ed3aefec14f87ccae7254586efae16194f493704fa5",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}