main
Ray tps92515hvqdgqtq1: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) cb0fe48
{
  "schema_version": 1,
  "type": "component",
  "slug": "tps92515hvqdgqtq1",
  "title": "TPS92515HVQDGQTQ1",
  "brief": "Texas Instruments LED Drivers, MSOP-10-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "led drivers",
    "tps92515hvqdgqtq1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "TPS92515HVQDGQTQ1",
    "manufacturer": "Texas Instruments",
    "package": "MSOP-10-EP",
    "pin_count": 11,
    "category": "LED Drivers",
    "subcategory": "LED Drivers",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps92515-q1",
    "parts": {
      "symbol": "tps92515hvqdgqtq1.kicad_sym",
      "footprint": "tps92515hvqdgqtq1.kicad_mod",
      "model_3d": "tps92515hvqdgqtq1-etched.glb",
      "model_3d_plain": "tps92515hvqdgqtq1.glb",
      "model_3d_step": "tps92515hvqdgqtq1-etched.step",
      "model_3d_step_plain": "tps92515hvqdgqtq1.step",
      "lbr": "tps92515hvqdgqtq1.lbr"
    },
    "distributor_links": {
      "lcsc": "C213563",
      "digikey": "296-44740-2-ND",
      "mouser": "595-TPS92515HVQDGQTQ"
    },
    "distributor_check": {
      "checked_at": "2026-09-26T23:47:54Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-44740-2-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-TPS92515HVQDGQTQ",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "COFF",
        "type": "input",
        "description": "Input for OFF-time control; connect resistor from VLED and capacitor to GND to set OFF-time threshold to 1.0 V nominal."
      },
      {
        "number": "2",
        "name": "VCC",
        "type": "power_out",
        "description": "5-V regulated output from internal regulator; nominal 5.0 V, range 4.8 to 5.2 V with external load up to 500 µA; use 1 µF to 10 µF decoupling capacitor."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference; connect to circuit ground plane and thermal pad."
      },
      {
        "number": "4",
        "name": "BOOT",
        "type": "input",
        "description": "Gate drive supply input; connect ceramic capacitor between BOOT and SW, and diode from VCC to BOOT; UVLO threshold 2.0 to 3.5 V with 125 mV hysteresis; maximum 70.5 V to GND."
      },
      {
        "number": "5",
        "name": "SW",
        "type": "output",
        "description": "Internal N-channel FET source output; connect to output inductor; integrated FET RDS(on) 290 mΩ typical at 25°C, rising to 600 mΩ at 150°C; maximum 65 V to GND."
      },
      {
        "number": "6",
        "name": "DRN",
        "type": "input",
        "description": "Internal N-channel FET drain input; connect to CSN node for peak current detection; maximum 65 V to GND for TPS92515HV."
      },
      {
        "number": "7",
        "name": "CSN",
        "type": "input",
        "description": "Current sense negative input; connect current sense resistor from VIN to CSN for high-side peak current monitoring; threshold 224 to 251 mV at VIADJ = VCC, or 211.5 to 223.5 mV at VIADJ = 2.2 V."
      },
      {
        "number": "8",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply voltage and current sense positive; operating range 5.5 to 65 V for TPS92515HV; UVLO threshold 4.65 to 5.15 V falling with 150 to 225 mV hysteresis; maximum 65 V to GND."
      },
      {
        "number": "9",
        "name": "PWM",
        "type": "input",
        "description": "PWM dimming input and device enable; threshold 0.95 to 1.05 V rising with 50 to 150 mV hysteresis; includes 100 µA pulldown when low; connect to VCC if not used."
      },
      {
        "number": "10",
        "name": "IADJ",
        "type": "input",
        "description": "Analog current adjust input; sets peak current threshold via internal 10:1 divider with 2.4 V clamp; practical range 0.5 to 5.5 V with best accuracy at 2.2 V or lower."
      },
      {
        "number": "11",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Package thermal pad (PowerPAD) present per PAGE 3 and PAGE 37-40 package outline but does not have a",
          "exposed pad 11 added from the footprint"
        ],
        "pages_sent": 41,
        "cost_usd": 0.4445,
        "at": "2026-09-26T23:47:36"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps92515-q1",
        "pages": 41,
        "sha256": "b6e415ec88013b0b",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 11,
        "described": 11,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps92515hvqdgqtq1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3,
          0.95
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "18605eed706df7bb9674107abe7aa36e0ba163a09c21a2cee6c75cfa291b7937",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps92515hvqdgqtq1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3,
          0.95
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "1c9962af0b6d391f873c64fda83328dec0961a4afe68cac0f0c5f9df38a1759e",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "MSOP-10-EP",
      "Category": "LED Drivers",
      "Pins": "11"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "tps92515hvqdgqtq1"
  ],
  "discovery_pitch": "TPS92515HVQDGQTQ1 (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps92515hvqdgqtq1.kicad_sym",
    "tps92515hvqdgqtq1.kicad_mod",
    "tps92515hvqdgqtq1.glb",
    "tps92515hvqdgqtq1.step",
    "tps92515hvqdgqtq1.lbr",
    "docs/hero.png",
    "docs/tps92515hvqdgqtq1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  }
}