TPS92515HVDGQR

{
  "schema_version": 1,
  "type": "component",
  "slug": "tps92515hvdgqr",
  "title": "TPS92515HVDGQR",
  "brief": "Texas Instruments LED Drivers, MSOP-10-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "led drivers",
    "tps92515hvdgqr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "TPS92515HVDGQR",
    "manufacturer": "Texas Instruments",
    "package": "MSOP-10-EP",
    "pin_count": 11,
    "category": "LED Drivers",
    "subcategory": "LED Drivers",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps92515-q1",
    "parts": {
      "symbol": "tps92515hvdgqr.kicad_sym",
      "footprint": "tps92515hvdgqr.kicad_mod",
      "model_3d": "tps92515hvdgqr-etched.glb",
      "model_3d_plain": "tps92515hvdgqr.glb",
      "model_3d_step": "tps92515hvdgqr-etched.step",
      "model_3d_step_plain": "tps92515hvdgqr.step",
      "lbr": "tps92515hvdgqr.lbr"
    },
    "distributor_links": {
      "lcsc": "C213553"
    },
    "pins": [
      {
        "number": "1",
        "name": "COFF",
        "type": "input",
        "description": "OFF-timer input; connect resistor from output voltage and capacitor to GND to set OFF-time, threshold voltage 0.95 V to 1.05 V."
      },
      {
        "number": "2",
        "name": "VCC",
        "type": "power_out",
        "description": "5-V regulated regulator output (4.8 V to 5.2 V nominal) with up to 500 µA external load capability; use decoupling capacitor to ground."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground reference and connection point for thermal pad dissipation."
      },
      {
        "number": "4",
        "name": "BOOT",
        "type": "input",
        "description": "Bootstrap supply input; connect ceramic capacitor between BOOT and SW, and external diode from VCC to power high-side gate driver, absolute maximum −0.3 V to 70.5 V."
      },
      {
        "number": "5",
        "name": "SW",
        "type": "output",
        "description": "Switching node output; internal FET source terminal connects to output inductor and floats between ground and VIN."
      },
      {
        "number": "6",
        "name": "DRN",
        "type": "input",
        "description": "Internal FET drain input; must connect to CSN node for proper high-side current sensing."
      },
      {
        "number": "7",
        "name": "CSN",
        "type": "input",
        "description": "Current sense negative input; connect sense resistor from VIN to CSN with peak voltage threshold of 224 mV to 251 mV (at VIADJ = VCC)."
      },
      {
        "number": "8",
        "name": "VIN",
        "type": "power_in",
        "description": "Input power supply (5.5 V to 65 V for TPS92515HV) and positive terminal for high-side current sense measurement."
      },
      {
        "number": "9",
        "name": "PWM",
        "type": "input",
        "description": "PWM dimming input with rising threshold 0.95 V to 1.05 V; enables pulse-width modulation of output current, tie to VCC if not used, 100 µA pull-down when low."
      },
      {
        "number": "10",
        "name": "IADJ",
        "type": "input",
        "description": "Analog output current adjust input (−0.3 V to 5.5 V) with internal 10:1 divider and 2.4 V clamp; sets peak current threshold, use 2.2 V or lower for optimum accuracy."
      },
      {
        "number": "11",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: User provided package hint as MSOP-10-EP, but datasheet specifies HVSSOP (DGQ) 10-Pin with PowerPAD;",
          "exposed pad 11 added from the footprint",
          "dropped thermal pad ['EP'] absent from footprint"
        ],
        "pages_sent": 41,
        "cost_usd": 0.4368,
        "at": "2026-09-23T20:46:42"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps92515-q1",
        "pages": 41,
        "sha256": "b6e415ec88013b0b",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 11,
        "described": 11,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    }
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "MSOP-10-EP",
      "Category": "LED Drivers",
      "Pins": "11"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "tps92515hvdgqr"
  ],
  "discovery_pitch": "TPS92515HVDGQR (Texas Instruments) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps92515hvdgqr.kicad_sym",
    "tps92515hvdgqr.kicad_mod",
    "tps92515hvdgqr.glb",
    "tps92515hvdgqr.step",
    "tps92515hvdgqr.lbr",
    "docs/hero.png",
    "docs/tps92515hvdgqr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-25T12:49:22.263Z"
}