component
TPS92513HVDGQR
Public Made by Adomby adom
Texas Instruments LED Drivers, HVSSOP-10-EP-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+48@@ -0,0 +1,48 @@+# TPS92513HVDGQR++**Texas Instruments** · LED Drivers · HVSSOP-10-EP-0.5mm++TPS92513HVDGQR from Texas Instruments, in a HVSSOP-10-EP-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | BOOT | output | A bootstrap capacitor is required between BOOT and PH, and the output is forced to switch off if the capacitor voltage is below the minimum required by the output device. |+| 2 | VIN | power_in | Input supply voltage with operating range of 4.5V to 42V for TPS92513 or 4.5V to 60V for the HV version. |+| 3 | UVLO | input | Adjustable undervoltage lockout pin set with a resistor divider from VIN. |+| 4 | PDIM | input | PWM dimming input pin where the duty cycle of the PWM signal linearly controls the average output current of the converter. |+| 5 | RT/CLK | input | Resistor timing and external clock input where an internal amplifier holds this pin at a fixed voltage for frequency programming, or becomes a high impedance clock input to the internal PLL when pulled above the PLL upper threshold. |+| 6 | IADJ | input | Analog current adjust input pin with voltage range of 180 mV to 1.8 V that sets the ISENSE pin voltage equal to the IADJ pin voltage divided by 6. |+| 7 | ISENSE | input | Inverting node of the transconductance error amplifier. |+| 8 | COMP | output | Error amplifier output and input to the output switch current comparator; connect frequency compensation components to this pin. |+| 9 | GND | power_in | Ground. |+| 10 | PH | output | Source of the internal high-side MOSFET. |+| 11 | PowerPAD | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | HVSSOP-10-EP-0.5mm |+| Category | LED Drivers |+| Pins | 11 |++## CAD (KiCad official)++- Symbol: `TPS92513HVDGQR`+- Footprint: `Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm`+- 3D model: HVSSOP-10-EP-0.5mm (KiCad packages3D, STEP)+- 3D model files: `tps92513hvdgqr-etched.step` / `tps92513hvdgqr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps92513hvdgqr.step` / `tps92513hvdgqr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps92513hv) (29 pp, sha256 `d5fcbe22d6bc890f`, retrieved 2026-10-03, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps92513hvdgqr-datasheet.pdf)
page.jsonadded+179@@ -0,0 +1,179 @@+{+ "slug": "tps92513hvdgqr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments LED Drivers, HVSSOP-10-EP-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "led drivers",+ "tps92513hvdgqr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps92513hvdgqr.kicad_sym",+ "tps92513hvdgqr.kicad_mod",+ "tps92513hvdgqr.glb",+ "tps92513hvdgqr.step",+ "tps92513hvdgqr.lbr",+ "docs/hero.png",+ "docs/tps92513hvdgqr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tps92513hvdgqr-hero.glb",+ "tps92513hvdgqr-hero.overlay.json"+ ],+ "component": {+ "mpn": "TPS92513HVDGQR",+ "manufacturer": "Texas Instruments",+ "package": "HVSSOP-10-EP-0.5mm",+ "pin_count": 11,+ "category": "LED Drivers",+ "subcategory": "LED Drivers",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps92513hv",+ "parts": {+ "symbol": "tps92513hvdgqr.kicad_sym",+ "footprint": "tps92513hvdgqr.kicad_mod",+ "model_3d": "tps92513hvdgqr-hero.glb",+ "model_3d_plain": "tps92513hvdgqr.glb",+ "model_3d_step": "tps92513hvdgqr-etched.step",+ "model_3d_step_plain": "tps92513hvdgqr.step",+ "lbr": "tps92513hvdgqr.lbr"+ },+ "distributor_links": {+ "lcsc": 213571,+ "digikey": "296-47304-2-ND",+ "mouser": "595-TPS92513HVDGQR"+ },+ "distributor_check": {+ "checked_at": "2026-10-03T04:18:11Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-47304-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TPS92513HVDGQR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "BOOT",+ "type": "output",+ "description": "A bootstrap capacitor is required between BOOT and PH, and the output is forced to switch off if the capacitor voltage is below the minimum required by the output device."+ },+ {+ "number": "2",+ "name": "VIN",+ "type": "power_in",+ "description": "Input supply voltage with operating range of 4.5V to 42V for TPS92513 or 4.5V to 60V for the HV version."+ },+ {+ "number": "3",+ "name": "UVLO",+ "type": "input",+ "description": "Adjustable undervoltage lockout pin set with a resistor divider from VIN."+ },+ {+ "number": "4",+ "name": "PDIM",+ "type": "input",+ "description": "PWM dimming input pin where the duty cycle of the PWM signal linearly controls the average output current of the converter."+ },+ {+ "number": "5",+ "name": "RT/CLK",+ "type": "input",+ "description": "Resistor timing and external clock input where an internal amplifier holds this pin at a fixed voltage for frequency programming, or becomes a high impedance clock input to the internal PLL when pulled above the PLL upper threshold."+ },+ {+ "number": "6",+ "name": "IADJ",+ "type": "input",+ "description": "Analog current adjust input pin with voltage range of 180 mV to 1.8 V that sets the ISENSE pin voltage equal to the IADJ pin voltage divided by 6."+ },+ {+ "number": "7",+ "name": "ISENSE",+ "type": "input",+ "description": "Inverting node of the transconductance error amplifier."+ },+ {+ "number": "8",+ "name": "COMP",+ "type": "output",+ "description": "Error amplifier output and input to the output switch current comparator; connect frequency compensation components to this pin."+ },+ {+ "number": "9",+ "name": "GND",+ "type": "power_in",+ "description": "Ground."+ },+ {+ "number": "10",+ "name": "PH",+ "type": "output",+ "description": "Source of the internal high-side MOSFET."+ },+ {+ "number": "11",+ "name": "PowerPAD",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "exposed pad 11 added from the footprint",+ "dropped thermal pad ['EP'] absent from footprint"+ ],+ "pages_sent": 7,+ "cost_usd": 0.1025,+ "at": "2026-10-03T04:17:50"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps92513hv",+ "pages": 29,+ "sha256": "d5fcbe22d6bc890f",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 11,+ "described": 11,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}