component

TPS92511DDAR

Public Made by Adom

by adom

Texas Instruments LED Drivers, SO-8-EP. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentled-drvtps92511ddar
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs tps92511ddar: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
package.json Publish 0.2.0 · Ray
pads.json footprint: the shipped SOIC-8 has no thermal pad, but the symbol and the datasheet both show 9 pads. TI DDA PowerPAD pa… · Ray
page.json tps92511ddar: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md tps92511ddar: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray
tps92511ddar-etched.fit.json tps92511ddar: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps92511ddar-etched.glb tps92511ddar: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps92511ddar-etched.step tps92511ddar: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps92511ddar.glb 3D: replace the model to match the corrected TI_SO-PowerPAD-8 footprint. The page shipped the plain SOIC-8 body, not th… · Ray
tps92511ddar.kicad_mod footprint: the shipped SOIC-8 has no thermal pad, but the symbol and the datasheet both show 9 pads. TI DDA PowerPAD pa… · Ray
tps92511ddar.kicad_sym Publish 0.1.0 · Ray
tps92511ddar.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect an… · Ray
tps92511ddar.step 3D: replace the model to match the corrected TI_SO-PowerPAD-8 footprint. The page shipped the plain SOIC-8 body, not th… · Ray

TPS92511DDAR

Texas Instruments · LED Drivers · SO-8-EP

TPS92511DDAR from Texas Instruments, in a SO-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC power_out Internal regulator output, typically regulated to 5.4 V. Connect a capacitor larger than 1 µF between VCC and GND.
2 PGND power_in Power Ground. Must be connected to the GND pin for normal operation. The PGND and GND pins are not internally shorted.
3 IADJ input Average LED current setting. An external resistor R_IADJ connecting IADJ to ground programs the average LED current. IADJ pin voltage is typically 1.25 V.
4 GND power_in Analog Signal Ground.
5 FS input Switching frequency setting. An external resistor R_FS connecting FS to ground programs the switching frequency from 50 kHz to 500 kHz (e.g. 500 kHz typical at R_FS = 20 kΩ).
6 DIM input PWM Dimming Control. Apply a logic-level PWM signal to dim the LED string. Internally pulled up. Upper threshold typ 1.0 V, lower threshold typ 0.44 V.
7 LX output Integrated MOSFET drain. Internally connected to the drain of the integrated low-side N-channel MOSFET. Connect to the output inductor and anode of the Schottky diode. R_DS(on) typ 1.4 Ω.
8 VIN power_in Input voltage supply pin to the device. Input voltage range 4.5 V to 65 V (67 V transient).
9 Thermal Pad power_in Thermal connection pad. Connect to a ground plane for heat dissipation.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SO-8-EP
Category LED-drv
Pins 9

Ordering variants

Same part, different packaging or reel option.

  • TPS92511DDAR

CAD (KiCad official)

  • Symbol: TPS92511DDAR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SO-8-EP (KiCad packages3D, STEP)
  • 3D model files: tps92511ddar-etched.step / tps92511ddar-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps92511ddar.step / tps92511ddar.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
tps92511ddar.step 123 KB You want the bare part, or you mark your own boards.
tps92511ddar-etched.step 2.3 MB You want the part with TPS92511DDAR already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 581 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (31 pp, sha256 d5e24ca64833ee45, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF