TPS92201AMDRVR

{
  "slug": "tps92201amdrvr",
  "version": "0.1.0",
  "type": "component",
  "description": "TI(德州仪器) , WSON-6-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "ic",
    "tps92201amdrvr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps92201amdrvr.kicad_sym",
    "tps92201amdrvr.kicad_mod",
    "tps92201amdrvr.glb",
    "tps92201amdrvr.step",
    "tps92201amdrvr.lbr",
    "docs/hero.png",
    "docs/tps92201amdrvr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps92201amdrvr-hero.glb",
    "tps92201amdrvr-hero.overlay.json",
    "tps92201amdrvr-etched.glb"
  ],
  "component": {
    "mpn": "TPS92201AMDRVR",
    "manufacturer": "TI(德州仪器)",
    "package": "WSON-6-EP(2x2)",
    "pin_count": 7,
    "category": "IC",
    "subcategory": "IC",
    "datasheet": "https://www.ti.com.cn/cn/lit/ds/symlink/tps92201a.pdf",
    "parts": {
      "symbol": "tps92201amdrvr.kicad_sym",
      "footprint": "tps92201amdrvr.kicad_mod",
      "model_3d": "tps92201amdrvr-hero.glb",
      "model_3d_plain": "tps92201amdrvr-etched.glb",
      "model_3d_step": "tps92201amdrvr-etched.step",
      "model_3d_step_plain": "tps92201amdrvr.step",
      "lbr": "tps92201amdrvr.lbr"
    },
    "distributor_links": {
      "lcsc": "C22427917",
      "digikey": "296-TPS92201AMDRVRTR-ND",
      "mouser": "595-TPS92201AMDRVR"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T00:53:38Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-TPS92201AMDRVRTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS92201AMDRVR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "PWM",
        "type": "input",
        "description": "PWM dimming input whose duty cycle sets the LED output current (1% to 100% duty, 20 kHz to 200 kHz PWM frequency), with a recommended voltage range of -0.1 V to 6 V and VIH/VIL thresholds of 1 V / 0.7 V."
      },
      {
        "number": "2",
        "name": "EN",
        "type": "input",
        "description": "Device enable input: logic high enables the device and logic low disables it into shutdown; it must be terminated and must not be left floating, with a recommended range of -0.1 V to 6 V."
      },
      {
        "number": "3",
        "name": "VIN",
        "type": "power_in",
        "description": "Power supply input, 2.5 V to 5.5 V recommended operating range, with an absolute maximum of 6 V."
      },
      {
        "number": "4",
        "name": "SW",
        "type": "power_out",
        "description": "Switch node connecting the internal FET switch to the inductor terminal; DC range is -0.3 V to VIN + 0.3 V and 10 ns transients are limited to -3 V to 9 V."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Power ground for the device."
      },
      {
        "number": "6",
        "name": "FB",
        "type": "input",
        "description": "Feedback pin of the internal control loop; an external resistor from this pin to GND sets the LED current (ILED = VFB / RSENSE, with VFB typically 100 mV), with an absolute maximum of 5.5 V."
      },
      {
        "number": "7",
        "name": "Thermal pad (EP)",
        "type": "passive",
        "description": "Exposed thermal pad that must be soldered to the printed circuit board for thermal and mechanical performance."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The exposed thermal pad is shown as pin 7 only in the package outline drawing (page 24) and is not i; The datasheet lists SW as 'PWR'; power_out was chosen as the KiCad class for the switch node, which ; The datasheet labels PWM, EN and FB as 'I' (input) without a more specific KiCad class; 'input' was "
        ],
        "pages_sent": 30,
        "cost_usd": 0.1036,
        "at": "2026-10-18T00:51:56"
      },
      "datasheet": {
        "url": "https://www.ti.com.cn/cn/lit/ds/symlink/tps92201a.pdf",
        "pages": 30,
        "sha256": "dca839c3a941fa2e",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 7,
        "described": 7,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps92201amdrvr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.0,
          1.98,
          0.82
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "a159a524ab16d3406353a16f8c20b59f5679eea26e2d41174628288b5b9da702",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps92201amdrvr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.0,
          1.98,
          0.82
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c5304c500ba485b675d495fcdc9601a2f40ee82407cc43d6057d0533259beb02",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}