component
TPS92020DR
Public Made by Adomby adom
Texas Instruments LED Drivers, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 17d ago |
| viewers | 17d ago |
| package.json | 17d ago |
| page.json | 17d ago |
| README.md | 17d ago |
| tps92020dr-etched.glb | 17d ago |
| tps92020dr-etched.step | 17d ago |
| tps92020dr-hero.glb | 17d ago |
| tps92020dr-hero.overlay.json | 17d ago |
| tps92020dr.glb | 17d ago |
| tps92020dr.kicad_mod | 17d ago |
| tps92020dr.kicad_sym | 17d ago |
| tps92020dr.lbr | 17d ago |
| tps92020dr.step | 17d ago |
TPS92020DR
Texas Instruments · LED Drivers · SOIC-8
TPS92020DR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DT | input | Sets the dead time of the high-side and low-side switch driving signals via a resistor to ground, referenced to the internal 2.25-V reference, and dead time is clamped to a minimum of 120 ns so any setting below 120 ns defaults to 120 ns. |
| 2 | RT | input | Current flowing out of this pin sets the switching frequency, where a resistor to ground sets the minimum frequency, a resistor in series with the opto-coupler transistor limits the maximum frequency, and the absolute maximum RT current range is -5 mA. |
| 3 | OC | input | Overcurrent protection pin: gate drivers are actively pulled low above 1 V, recover with soft start after falling below 0.6 V, and the device latches off when the voltage exceeds 2 V until VCC drops below UVLO. |
| 4 | SS | input | Sets the soft-start time with a capacitor to ground, and pulling this pin below 1 V disables the device for ON/OFF control. |
| 5 | GD2 | output | Low-side/high-side gate driver output connected to the gate driver transformer primary to drive the half bridge, rated for continuous gate drive current of ±25 mA as an absolute maximum. |
| 6 | GND | power_in | Ground reference for the device; all voltages on the device are specified with respect to GND. |
| 7 | VCC | power_in | Bias supply input that must be connected to a supply below 20 V, with the device enabled above 10.5 V, in UVLO below 9.5 V, and in VCC overvoltage protection above 20 V (absolute maximum VCC 22 V). |
| 8 | GD1 | output | High-side/low-side gate driver output connected to the gate driver transformer primary to drive the half bridge, rated for continuous gate drive current of ±25 mA as an absolute maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | LED Drivers |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
TPS92020DR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
tps92020dr-etched.step/tps92020dr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps92020dr.step/tps92020dr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (25 pp, sha256
2e93a1ceec5b63b6, retrieved 2026-10-09, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).