Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS7B8150DGNR

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · HVSSOP-8

TPS7B8150DGNR from Texas Instruments, in a HVSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Unregulated input power supply pin, 3V to 40V operating range with 45V transient tolerance for 200ms and 2.7V UVLO threshold with 200mV hysteresis.
2 EN input Enable input control pin, logic high ≥2V enables regulator, logic low <0.7V disables to shutdown mode, with 10nA input current.
3 NC unconnected Not internally connected, do not connect to biased voltage, tie to ground or leave floating.
4 GND power_in Ground reference, connect thermal pad to large-area GND plane for improved thermal performance.
5 GND power_in Ground reference.
6 GND power_in Ground reference.
7 NC unconnected Not internally connected.
8 OUT output Regulated output voltage pin, 3.3V or 5V fixed output, 0-150mA output current capability, ±1.5% line and load regulation, requires 1-200µF output capacitor with 0.001-5Ω ESR.
9 Thermal Pad passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package HVSSOP-8
Category Power Management (PMIC)
Pins 9

CAD (KiCad official)

  • Symbol: TPS7B8150DGNR
  • Footprint: Package_SO:HVSSOP-8-1EP_3x3mm_P0.65mm_EP1.57x1.89mm
  • 3D model: HVSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.0 mm nominal HVSSOP height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: tps7b8150dgnr-etched.step / tps7b8150dgnr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps7b8150dgnr.step / tps7b8150dgnr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (29 pp, sha256 3c4e3f35d1fd9569, retrieved 2026-10-01, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF