main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs tps7b7702qpwprq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tps7b7702qpwprq1: viewers · Ray
package.json tps7b7702qpwprq1: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tps7b7702qpwprq1: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/tps7b7702qpwprq1 · Ray
tps7b7702qpwprq1-etched.fit.json tps7b7702qpwprq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps7b7702qpwprq1-etched.glb tps7b7702qpwprq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps7b7702qpwprq1-etched.step tps7b7702qpwprq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps7b7702qpwprq1.glb Publish 0.1.0 · Ray
tps7b7702qpwprq1.kicad_mod Publish 0.1.0 · Ray
tps7b7702qpwprq1.kicad_sym Publish 0.1.0 · Ray
tps7b7702qpwprq1.lbr Publish 0.1.0 · Ray
tps7b7702qpwprq1.step Publish 0.1.0 · Ray

TPS7B7702QPWPRQ1

Texas Instruments · Linear Voltage Regulators (LDO) · HTSSOP-16-EP

TPS7B7702QPWPRQ1 from Texas Instruments, in a HTSSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Input power-supply voltage, 4.5 to 40 V operating range with 45 V load-dump transient protection.
2 EN1 input Active-high enable input for OUT1 channel with internal pulldown; logic threshold VIL 0.7 V, VIH 2 V.
3 EN2 input Active-high enable input for OUT2 channel with internal pulldown; logic threshold VIL 0.7 V, VIH 2 V.
4 VCC power_out Internal 4.5 V regulator output with up to 15 mA current capability; bypass with 1 μF ceramic capacitor to GND.
5 SENSE1 output Channel 1 current-sense output proportional to OUT1 current with 1/198 ratio; connect resistor and 1 μF capacitor to GND.
6 SENSE2 output Channel 2 current-sense output proportional to OUT2 current with 1/198 ratio; connect resistor and 1 μF capacitor to GND.
7 SENSE_SEL input Current-sense channel selector for multiplexing; low selects CH1, high selects CH2; logic threshold VIL 0.7 V, VIH 2 V.
8 SENSE_EN input Current-sense multiplexer enable, active-low; disables sense output for zero current drain; logic threshold VIL 0.7 V, VIH 2 V.
9 ERR output Open-drain fault output asserts low for thermal shutdown, current limit, short-to-battery, or reverse-current fault conditions.
10 LIM1 output Channel 1 current-limit output pin; connect resistor to GND to program maximum output current from 50 to 300 mA.
11 LIM2 output Channel 2 current-limit output pin; connect resistor to GND to program maximum output current from 50 to 300 mA.
12 GND power_in Ground reference; includes exposed thermal PowerPAD for enhanced heat dissipation.
13 FB2 input Channel 2 feedback input for setting OUT2 voltage 1.5 to 20 V adjustable via external resistor divider, or to GND for switch mode.
14 OUT2 power_out Channel 2 regulated output voltage, 1.5 to 20 V adjustable, 0 to 300 mA maximum, minimum dropout 500 mV at 100 mA.
15 FB1 input Channel 1 feedback input for setting OUT1 voltage 1.5 to 20 V adjustable via external resistor divider, or to GND for switch mode.
16 OUT1 power_out Channel 1 regulated output voltage, 1.5 to 20 V adjustable, 0 to 300 mA maximum, minimum dropout 500 mV at 100 mA.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package HTSSOP-16-EP
Category Power Supply Chip
Pins 17

CAD (KiCad official)

  • Symbol: TPS7B7702QPWPRQ1
  • Footprint: Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm
  • 3D model: HTSSOP-16-EP (KiCad packages3D, STEP)
  • 3D model files: tps7b7702qpwprq1-etched.step / tps7b7702qpwprq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps7b7702qpwprq1.step / tps7b7702qpwprq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (28 pp, sha256 8ed0e756c0a0aedc, retrieved 2026-09-27, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF