main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs tps7b6925qdcyrq1: hero re-rendered with the chip (after the 10-30 render outage) · Ray
viewers tps7b6925qdcyrq1: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
tps7b6925qdcyrq1-etched.glb Publish 0.1.0 · Ray
tps7b6925qdcyrq1-etched.step tps7b6925qdcyrq1: factory component page (tier=mfr) · Ray
tps7b6925qdcyrq1-hero.glb tps7b6925qdcyrq1: hero GLB from the etched model (keeps the MPN mark) · Ray
tps7b6925qdcyrq1-hero.overlay.json Publish 0.1.0 · Ray
tps7b6925qdcyrq1.glb Publish 0.1.0 · Ray
tps7b6925qdcyrq1.kicad_mod Publish 0.1.0 · Ray
tps7b6925qdcyrq1.kicad_sym Publish 0.1.0 · Ray
tps7b6925qdcyrq1.lbr Publish 0.1.0 · Ray
tps7b6925qdcyrq1.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 4 pins · Ray

TPS7B6925QDCYRQ1

Texas Instruments · Linear Voltage Regulators (LDO) · SOT-223-4

TPS7B6925QDCYRQ1 from Texas Instruments, in a SOT-223-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Input power-supply voltage; the pin is high-voltage tolerant, operates over 4 V to 40 V (45 V transient for 200 ms), and a capacitor above 0.1 µF is recommended close to this pin.
2 GND power_in Ground reference; all voltages are specified with respect to the GND terminal.
3 OUT power_out Regulated output voltage (2.5 V for the TPS7B6925-Q1) delivering up to 150 mA, requiring an output capacitor of 2.2 µF to 100 µF with ESR up to 2 Ω.
4 GND power_in Ground reference; the datasheet lists this pin as a second GND terminal for the SOT-223 package.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-223-4
Category Power Supply Chip
Pins 4

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage (fixed 2.5-V output) VI 4 40 V Fixed 2.5-V output, IO = 1 mA 5
Quiescent current (fixed 2.5-V version) IQ 15 25 µA Fixed 2.5-V and 3.3-V version, VI = 4 to 40 V 5
Undervoltage detection, ramp VI down until output turns OFF VIN(UVLO) 3 V Ramp VI down until the output turns OFF 5
Regulated output voltage tolerance (fixed 2.5-V version) VO -3 3 % Fixed 2.5-V version, VI = 4 to 40 V, IO = 1 to 150 mA 5
Line regulation ΔVO(ΔVI) 10 mV VI = 6 to 40 V, IO = 10 mA 5
Load regulation ΔVO(ΔIL) 20 mV IO = 1 to 150 mA 5
Dropout voltage (fixed 2.5-V version, IO = 50 mA) VDROP 1.575 V Fixed 2.5-V version, VI, VO, IO = 50 mA 5
Dropout voltage (fixed 2.5-V version, IO = 100 mA) VDROP 1.575 V Fixed 2.5-V version, VI, VO, IO = 100 mA 5
Output current IO 0 150 mA VO in regulation 5
Output current-limit IOCL 150 500 mA OUT short to ground 5
Unregulated input voltage -0.3 45 V 4
Regulated output voltage -0.3 7 V 4
Operating junction temperature range TJ -40 150 °C 4
Storage temperature Tstg -65 150 °C 4
Unregulated input voltage (recommended) VI 4 40 V 4
Output voltage (recommended) VO 0 5.5 V 4
Output capacitor requirements CO 2.2 100 µF Effective capacitance value 4
Output ESR requirements ESRCO 0.001 2 Ω Relevant ESR value at f = 10 kHz 4
Operating junction temperature range (recommended) TJ -40 150 °C 4
Undervoltage detection, ramp VI up until output turns on VIN(UVLO) 3.65 V Ramp VI up until the output turns on 5
Power supply ripple rejection PSRR 60 dB Vrip = 0.5 Vpp, Load = 10 mA, f = 100 Hz, CO = 2.2 µF 5
Junction shutdown temperature Tsd 175 °C 5
Hysteresis of thermal shutdown Thys 25 °C 5
Junction-to-ambient thermal resistance (DCY, 4 pins) RθJA 64.2 °C/W JEDEC high-K board, JESD 51-7, 2s2p four layer board with 2-oz copper 4
Junction-to-case (top) thermal resistance (DCY, 4 pins) RθJC(top) 46.8 °C/W JEDEC high-K board, JESD 51-7 4
Junction-to-board thermal resistance (DCY, 4 pins) RθJB 13.3 °C/W JEDEC high-K board, JESD 51-7 4
Junction-to-top characterization parameter (DCY, 4 pins) ψJT 6.3 °C/W JEDEC high-K board, JESD 51-7 4
Junction-to-board characterization parameter (DCY, 4 pins) ψJB 13.2 °C/W JEDEC high-K board, JESD 51-7 4

CAD (KiCad official)

  • Symbol: TPS7B6925QDCYRQ1
  • Footprint: Package_TO_SOT_SMD:SOT-223
  • 3D model: SOT-223-4 (KiCad packages3D, STEP)
  • 3D model files: tps7b6925qdcyrq1-etched.step / tps7b6925qdcyrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps7b6925qdcyrq1.step / tps7b6925qdcyrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (26 pp, sha256 91652020d6cc8bc6, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF