component
TPS7A9101DSKR
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SON-10-EP(2.5x2.5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 2d ago |
| viewers | 2d ago |
| package.json | 2d ago |
| page.json | 2d ago |
| README.md | 2d ago |
| tps7a9101dskr-etched.glb | 2d ago |
| tps7a9101dskr-etched.step | 2d ago |
| tps7a9101dskr-hero.glb | 2d ago |
| tps7a9101dskr-hero.overlay.json | 2d ago |
| tps7a9101dskr.glb | 2d ago |
| tps7a9101dskr.kicad_mod | 2d ago |
| tps7a9101dskr.kicad_sym | 2d ago |
| tps7a9101dskr.lbr | 2d ago |
| tps7a9101dskr.step | 2d ago |
TPS7A9101DSKR
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SON-10-EP(2.5x2.5)
TPS7A9101DSKR from Texas Instruments, in a SON-10-EP(2.5x2.5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Regulated output with maximum voltage VIN + 0.3V; requires ≥10µF capacitor to GND for stability. |
| 2 | OUT | output | Regulated output with maximum voltage VIN + 0.3V; requires ≥10µF capacitor to GND for stability. |
| 3 | FB | input | Feedback input (maximum 3.6V) serving as control loop error amplifier input to set device output voltage. |
| 4 | GND | power_in | Device ground connected to thermal pad. |
| 5 | PG | tri_state | Open-drain power good indicator output (maximum 7.0V, 5mA sink current) requiring 10kΩ to 100kΩ external pullup resistor. |
| 6 | SS_CTRL | input | Soft start control input (0 to VIN + 0.3V) connected to GND or IN to change NR/SS capacitor charging current; must connect to GND if capacitor not used to avoid output overshoot. |
| 7 | EN | input | Enable input (0 to 7.0V) enabling regulator when VEN ≥ VIH(EN) and disabling when VEN ≤ VIL(EN); must connect to IN if enable function not used. |
| 8 | NR/SS | input | Noise reduction input (0 to 3.6V) for external capacitor connection to filter internal bandgap noise and set output ramp rate to limit inrush current. |
| 9 | IN | power_in | Input power supply (operating range 1.4V to 6.5V, maximum 7.0V) requiring ≥10µF ceramic input capacitor. |
| 10 | IN | power_in | Input power supply (operating range 1.4V to 6.5V, maximum 7.0V) requiring ≥10µF ceramic input capacitor. |
| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SON-10-EP(2.5x2.5) |
| Category | Power Management (PMIC) |
| Pins | 11 |
CAD (KiCad official)
- Symbol:
TPS7A9101DSKR - Footprint:
Package_SON:WSON-10-1EP_2.5x2.5mm_P0.5mm_EP1.2x2mm - 3D model: SON-10-EP(2.5x2.5) (KiCad packages3D, STEP)
- 3D model files:
tps7a9101dskr-etched.step/tps7a9101dskr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps7a9101dskr.step/tps7a9101dskr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (35 pp, sha256
85aef68997137e55, retrieved 2026-10-03, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).