component
TPS7A91
Public Made by Adomby adom
TI low-noise, high-PSRR LDO, VSON-10. 1 A, adjustable, programmable soft-start, fast transient. Datasheet-verified.
← Commit history
tps7a91: backfill missing artifacts (etch, variants)
3 files changed
+22550−10
diff truncated
README.md+2@@ -35,6 +35,8 @@ Low-noise linear regulator for supplying sensitive analog and RF rails, deliveri ## Ordering variants +Same part, different packaging or reel option.+ - `TPS7A9101DRBR (VSON-10)` - `TPS7A9101DSKR (VSON-10, alt)`
page.json+21−10@@ -36,19 +36,19 @@ "number": "1", "name": "OUT", "type": "power_out",- "description": "Regulated output. Tie to pin 2 (both are OUT). A 10 \u00b5F or greater capacitor must be connected from this pin to GND for stability. Output range 0.8 V to 5.2 V, up to 1 A."+ "description": "Regulated output. Tie to pin 2 (both are OUT). A 10 µF or greater capacitor must be connected from this pin to GND for stability. Output range 0.8 V to 5.2 V, up to 1 A." }, { "number": "2", "name": "OUT", "type": "power_out",- "description": "Regulated output (paralleled with pin 1). Requires a 10 \u00b5F or greater output capacitor to GND for loop stability."+ "description": "Regulated output (paralleled with pin 1). Requires a 10 µF or greater output capacitor to GND for loop stability." }, { "number": "3", "name": "FB", "type": "input",- "description": "Feedback pin. Input to the control-loop error amplifier; regulated to VREF = 0.8 V. Used with an external resistor divider from OUT to GND to set VOUT (VOUT = 0.8 V \u00d7 (1 + R1/R2))."+ "description": "Feedback pin. Input to the control-loop error amplifier; regulated to VREF = 0.8 V. Used with an external resistor divider from OUT to GND to set VOUT (VOUT = 0.8 V × (1 + R1/R2))." }, { "number": "4",@@ -60,37 +60,37 @@ "number": "5", "name": "PG", "type": "output",- "description": "Open-drain power-good indicator for the LDO output. Requires a 10 k\u03a9 to 100 k\u03a9 external pull-up resistor. PG asserts low when VOUT falls below ~88.9% of nominal. May be left floating or tied to GND if unused."+ "description": "Open-drain power-good indicator for the LDO output. Requires a 10 kΩ to 100 kΩ external pull-up resistor. PG asserts low when VOUT falls below ~88.9% of nominal. May be left floating or tied to GND if unused." }, { "number": "6", "name": "SS_CTRL", "type": "input",- "description": "Soft-start control pin. Tie to GND or IN to select the NR/SS capacitor charging current (typ 6.2 \u00b5A). If no CNR/SS capacitor is used, SS_CTRL must be tied to GND to avoid output overshoot."+ "description": "Soft-start control pin. Tie to GND or IN to select the NR/SS capacitor charging current (typ 6.2 µA). If no CNR/SS capacitor is used, SS_CTRL must be tied to GND to avoid output overshoot." }, { "number": "7", "name": "EN", "type": "input",- "description": "Enable input. LDO is enabled when VEN \u2265 VIH(EN) (typ 1.1 V, max 6.5 V) and disabled when VEN \u2264 VIL(EN) (max 0.4 V). Must be tied to IN if the enable function is not used; do not float."+ "description": "Enable input. LDO is enabled when VEN ≥ VIH(EN) (typ 1.1 V, max 6.5 V) and disabled when VEN ≤ VIL(EN) (max 0.4 V). Must be tied to IN if the enable function is not used; do not float." }, { "number": "8", "name": "NR/SS", "type": "passive",- "description": "Noise-reduction / soft-start pin. Connect an external capacitor (0-10 \u00b5F) to bypass the internal band-gap reference; reduces output noise to very low levels and, together with SS_CTRL, sets the output ramp rate to limit inrush current."+ "description": "Noise-reduction / soft-start pin. Connect an external capacitor (0-10 µF) to bypass the internal band-gap reference; reduces output noise to very low levels and, together with SS_CTRL, sets the output ramp rate to limit inrush current." }, { "number": "9", "name": "IN", "type": "power_in",- "description": "Input supply pin (paralleled with pin 10). Input range 1.4 V to 6.5 V. A 10 \u00b5F or greater input capacitor is required close to the pin."+ "description": "Input supply pin (paralleled with pin 10). Input range 1.4 V to 6.5 V. A 10 µF or greater input capacitor is required close to the pin." }, { "number": "10", "name": "IN", "type": "power_in",- "description": "Input supply pin (paralleled with pin 9). Input range 1.4 V to 6.5 V; 10 \u00b5F or greater bypass capacitor required."+ "description": "Input supply pin (paralleled with pin 9). Input range 1.4 V to 6.5 V; 10 µF or greater bypass capacitor required." }, { "number": "11",@@ -166,6 +166,17 @@ "docs/hero.png", "docs/tps7a91-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "tps7a91-etched.step"+ ],+ "variants": [+ {+ "mpn": "TPS7A9101DRBR (VSON-10)",+ "kind": "packaging"+ },+ {+ "mpn": "TPS7A9101DSKR (VSON-10, alt)",+ "kind": "packaging"+ } ] }
tps7a91-etched.stepadded+22527@@ -0,0 +1,27489 @@+ISO-10303-21;+HEADER;+FILE_DESCRIPTION(('Open CASCADE Model'),'2;1');+FILE_NAME('Open CASCADE Shape Model','2026-09-04T02:09:52',('Author'),(+ 'Open CASCADE'),'Open CASCADE STEP processor 7.9','Open CASCADE 7.9'+ ,'Unknown');+FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));+ENDSEC;+DATA;+#1 = APPLICATION_PROTOCOL_DEFINITION('international standard',+ 'automotive_design',2000,#2);+#2 = APPLICATION_CONTEXT(+ 'core data for automotive mechanical design processes');+#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10);+#4 = PRODUCT_DEFINITION_SHAPE('','',#5);+#5 = PRODUCT_DEFINITION('design','',#6,#9);+#6 = PRODUCT_DEFINITION_FORMATION('','',#7);+#7 = PRODUCT('part','part','',(#8));+#8 = PRODUCT_CONTEXT('',#2,'mechanical');+#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#10 = SHAPE_REPRESENTATION('',(#11,#15,#19),#23);+#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14);+#12 = CARTESIAN_POINT('',(0.,0.,0.));+#13 = DIRECTION('',(0.,0.,1.));+#14 = DIRECTION('',(1.,0.,-0.));+#15 = AXIS2_PLACEMENT_3D('',#16,#17,#18);+#16 = CARTESIAN_POINT('',(0.,0.,0.));+#17 = DIRECTION('',(0.,0.,1.));+#18 = DIRECTION('',(1.,0.,-0.));+#19 = AXIS2_PLACEMENT_3D('',#20,#21,#22);+#20 = CARTESIAN_POINT('',(0.,0.,0.));+#21 = DIRECTION('',(0.,0.,1.));+#22 = DIRECTION('',(1.,0.,-0.));+#23 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#27)) GLOBAL_UNIT_ASSIGNED_CONTEXT(+(#24,#25,#26)) REPRESENTATION_CONTEXT('Context #1',+ '3D Context with UNIT and UNCERTAINTY') );+#24 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#25 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#26 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#27 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(5.E-07),#24,+ 'distance_accuracy_value','confusion accuracy');+#28 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));+#29 = SHAPE_DEFINITION_REPRESENTATION(#30,#36);+#30 = PRODUCT_DEFINITION_SHAPE('','',#31);+#31 = PRODUCT_DEFINITION('design','',#32,#35);+#32 = PRODUCT_DEFINITION_FORMATION('','',#33);+#33 = PRODUCT('body','body','',(#34));+#34 = PRODUCT_CONTEXT('',#2,'mechanical');+#35 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#36 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#37),#14425);+#37 = MANIFOLD_SOLID_BREP('',#38);+#38 = CLOSED_SHELL('',(#39,#159,#263,#312,#1618,#1645,#1672,#1679,#2120,+ #2169,#2583,#2688,#2738,#2811,#2916,#2966,#3039,#3144,#3194,#3267,+ #3372,#3422,#3495,#3600,#3650,#3723,#3750,#3855,#3905,#3978,#4083,+ #4133,#4206,#4311,#4361,#4434,#4539,#4589,#4662,#4767,#4817,#4890,+ #7746,#7773,#7800,#7827,#7854,#7881,#7908,#7935,#7962,#7989,#8016,+ #8043,#8050,#8077,#8084,#8111,#8118,#8145,#8152,#8179,#8186,#8213,+ #8220,#8247,#8254,#8281,#8288,#8315,#8322,#8349,#8356,#8411,#8487,+ #8536,#8585,#8634,#8683,#8732,#8781,#8808,#8884,#8933,#8982,#9031,+ #9080,#9129,#9178,#9227,#9254,#9330,#9379,#9428,#9477,#9526,#9575,+ #9624,#9673,#9722,#9771,#9820,#9869,#9918,#9967,#10016,#10065,#10114+ ,#10163,#10212,#10261,#10310,#10359,#10408,#10457,#10506,#10555,+ #10604,#10631,#10707,#10756,#10805,#10854,#10903,#10952,#10979,+ #11055,#11104,#11153,#11202,#11251,#11300,#11349,#11376,#11452,+ #11501,#11550,#11599,#11648,#11697,#11746,#11795,#11844,#11893,+ #11942,#11991,#12040,#12089,#12138,#12187,#12214,#12290,#12339,+ #12388,#12437,#12486,#12535,#12584,#12633,#12682,#12731,#12758,+ #12762,#12773,#12991,#13022,#13032,#13129,#13391,#13405,#13479,+ #13526,#13573,#13628,#13683,#13738,#13771,#13845,#13892,#13917,+ #14008,#14063,#14118,#14182,#14246,#14301,#14356,#14398,#14408,+ #14414));+#39 = ADVANCED_FACE('',(#40),#54,.F.);+#40 = FACE_BOUND('',#41,.F.);+#41 = EDGE_LOOP('',(#42,#77,#105,#133));+#42 = ORIENTED_EDGE('',*,*,#43,.F.);+#43 = EDGE_CURVE('',#44,#46,#48,.T.);+#44 = VERTEX_POINT('',#45);+#45 = CARTESIAN_POINT('',(-0.6,0.75,0.));+#46 = VERTEX_POINT('',#47);+#47 = CARTESIAN_POINT('',(-0.6,-1.,0.));+#48 = SURFACE_CURVE('',#49,(#53,#65),.PCURVE_S1.);+#49 = LINE('',#50,#51);+#50 = CARTESIAN_POINT('',(-0.6,0.75,0.));+#51 = VECTOR('',#52,1.);+#52 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#53 = PCURVE('',#54,#59);+#54 = PLANE('',#55);+#55 = AXIS2_PLACEMENT_3D('',#56,#57,#58);+#56 = CARTESIAN_POINT('',(-0.6,0.75,0.));+#57 = DIRECTION('',(1.,-2.22044604925E-16,0.));+#58 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#59 = DEFINITIONAL_REPRESENTATION('',(#60),#64);+#60 = LINE('',#61,#62);+#61 = CARTESIAN_POINT('',(0.,0.));+#62 = VECTOR('',#63,1.);+#63 = DIRECTION('',(1.,0.));+#64 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#65 = PCURVE('',#66,#71);+#66 = PLANE('',#67);+#67 = AXIS2_PLACEMENT_3D('',#68,#69,#70);+#68 = CARTESIAN_POINT('',(1.612077696815E-02,-2.548803428634E-02,0.));+#69 = DIRECTION('',(0.,0.,1.));+#70 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#71 = DEFINITIONAL_REPRESENTATION('',(#72),#76);+#72 = LINE('',#73,#74);+#73 = CARTESIAN_POINT('',(-0.775488034286,-0.616120776968));+#74 = VECTOR('',#75,1.);+#75 = DIRECTION('',(1.,0.));+#76 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#77 = ORIENTED_EDGE('',*,*,#78,.T.);+#78 = EDGE_CURVE('',#44,#79,#81,.T.);+#79 = VERTEX_POINT('',#80);+#80 = CARTESIAN_POINT('',(-0.6,0.75,2.E-02));+#81 = SURFACE_CURVE('',#82,(#86,#93),.PCURVE_S1.);+#82 = LINE('',#83,#84);+#83 = CARTESIAN_POINT('',(-0.6,0.75,0.));+#84 = VECTOR('',#85,1.);+#85 = DIRECTION('',(0.,0.,1.));+#86 = PCURVE('',#54,#87);+#87 = DEFINITIONAL_REPRESENTATION('',(#88),#92);+#88 = LINE('',#89,#90);+#89 = CARTESIAN_POINT('',(0.,0.));+#90 = VECTOR('',#91,1.);+#91 = DIRECTION('',(0.,-1.));+#92 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#93 = PCURVE('',#94,#99);+#94 = PLANE('',#95);+#95 = AXIS2_PLACEMENT_3D('',#96,#97,#98);+#96 = CARTESIAN_POINT('',(-0.35,1.,0.));+#97 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#98 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#99 = DEFINITIONAL_REPRESENTATION('',(#100),#104);+#100 = LINE('',#101,#102);+#101 = CARTESIAN_POINT('',(0.353553390593,0.));+#102 = VECTOR('',#103,1.);+#103 = DIRECTION('',(0.,-1.));+#104 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#105 = ORIENTED_EDGE('',*,*,#106,.F.);+#106 = EDGE_CURVE('',#107,#79,#109,.T.);+#107 = VERTEX_POINT('',#108);+#108 = CARTESIAN_POINT('',(-0.6,-1.,2.E-02));+#109 = SURFACE_CURVE('',#110,(#114,#121),.PCURVE_S1.);+#110 = LINE('',#111,#112);+#111 = CARTESIAN_POINT('',(-0.6,1.12,2.E-02));+#112 = VECTOR('',#113,1.);+#113 = DIRECTION('',(2.22044604925E-16,1.,0.));+#114 = PCURVE('',#54,#115);+#115 = DEFINITIONAL_REPRESENTATION('',(#116),#120);+#116 = LINE('',#117,#118);+#117 = CARTESIAN_POINT('',(-0.37,-2.E-02));+#118 = VECTOR('',#119,1.);+#119 = DIRECTION('',(-1.,0.));+#120 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#121 = PCURVE('',#122,#127);+#122 = PLANE('',#123);+#123 = AXIS2_PLACEMENT_3D('',#124,#125,#126);+#124 = CARTESIAN_POINT('',(-1.49,1.49,2.E-02));+#125 = DIRECTION('',(0.,0.,1.));+#126 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#127 = DEFINITIONAL_REPRESENTATION('',(#128),#132);+#128 = LINE('',#129,#130);+#129 = CARTESIAN_POINT('',(0.37,0.89));+#130 = VECTOR('',#131,1.);+#131 = DIRECTION('',(-1.,0.));+#132 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#133 = ORIENTED_EDGE('',*,*,#134,.F.);+#134 = EDGE_CURVE('',#46,#107,#135,.T.);+#135 = SURFACE_CURVE('',#136,(#140,#147),.PCURVE_S1.);+#136 = LINE('',#137,#138);+#137 = CARTESIAN_POINT('',(-0.6,-1.,0.));+#138 = VECTOR('',#139,1.);+#139 = DIRECTION('',(0.,0.,1.));+#140 = PCURVE('',#54,#141);+#141 = DEFINITIONAL_REPRESENTATION('',(#142),#146);+#142 = LINE('',#143,#144);+#143 = CARTESIAN_POINT('',(1.75,0.));+#144 = VECTOR('',#145,1.);+#145 = DIRECTION('',(0.,-1.));+#146 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#147 = PCURVE('',#148,#153);+#148 = PLANE('',#149);+#149 = AXIS2_PLACEMENT_3D('',#150,#151,#152);+#150 = CARTESIAN_POINT('',(-0.6,-1.,0.));+#151 = DIRECTION('',(2.22044604925E-16,1.,0.));+#152 = DIRECTION('',(1.,-2.22044604925E-16,0.));+#153 = DEFINITIONAL_REPRESENTATION('',(#154),#158);+#154 = LINE('',#155,#156);+#155 = CARTESIAN_POINT('',(0.,0.));+#156 = VECTOR('',#157,1.);+#157 = DIRECTION('',(0.,-1.));+#158 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#159 = ADVANCED_FACE('',(#160),#66,.F.);+#160 = FACE_BOUND('',#161,.F.);+#161 = EDGE_LOOP('',(#162,#163,#186,#214,#242));+#162 = ORIENTED_EDGE('',*,*,#43,.T.);+#163 = ORIENTED_EDGE('',*,*,#164,.T.);+#164 = EDGE_CURVE('',#46,#165,#167,.T.);+#165 = VERTEX_POINT('',#166);+#166 = CARTESIAN_POINT('',(0.6,-1.,0.));+#167 = SURFACE_CURVE('',#168,(#172,#179),.PCURVE_S1.);+#168 = LINE('',#169,#170);+#169 = CARTESIAN_POINT('',(-0.6,-1.,0.));+#170 = VECTOR('',#171,1.);+#171 = DIRECTION('',(1.,-2.22044604925E-16,0.));+#172 = PCURVE('',#66,#173);+#173 = DEFINITIONAL_REPRESENTATION('',(#174),#178);+#174 = LINE('',#175,#176);+#175 = CARTESIAN_POINT('',(0.974511965714,-0.616120776968));+#176 = VECTOR('',#177,1.);+#177 = DIRECTION('',(0.,1.));+#178 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#179 = PCURVE('',#148,#180);+#180 = DEFINITIONAL_REPRESENTATION('',(#181),#185);+#181 = LINE('',#182,#183);+#182 = CARTESIAN_POINT('',(0.,0.));+#183 = VECTOR('',#184,1.);+#184 = DIRECTION('',(1.,0.));+#185 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#186 = ORIENTED_EDGE('',*,*,#187,.T.);+#187 = EDGE_CURVE('',#165,#188,#190,.T.);+#188 = VERTEX_POINT('',#189);+#189 = CARTESIAN_POINT('',(0.6,1.,0.));+#190 = SURFACE_CURVE('',#191,(#195,#202),.PCURVE_S1.);+#191 = LINE('',#192,#193);+#192 = CARTESIAN_POINT('',(0.6,-1.,0.));+#193 = VECTOR('',#194,1.);+#194 = DIRECTION('',(2.22044604925E-16,1.,0.));+#195 = PCURVE('',#66,#196);+#196 = DEFINITIONAL_REPRESENTATION('',(#197),#201);+#197 = LINE('',#198,#199);+#198 = CARTESIAN_POINT('',(0.974511965714,0.583879223032));+#199 = VECTOR('',#200,1.);+#200 = DIRECTION('',(-1.,0.));+#201 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#202 = PCURVE('',#203,#208);+#203 = PLANE('',#204);+#204 = AXIS2_PLACEMENT_3D('',#205,#206,#207);+#205 = CARTESIAN_POINT('',(0.6,-1.,0.));+#206 = DIRECTION('',(-1.,2.22044604925E-16,0.));+#207 = DIRECTION('',(2.22044604925E-16,1.,0.));+#208 = DEFINITIONAL_REPRESENTATION('',(#209),#213);+#209 = LINE('',#210,#211);+#210 = CARTESIAN_POINT('',(0.,0.));+#211 = VECTOR('',#212,1.);+#212 = DIRECTION('',(1.,0.));+#213 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#214 = ORIENTED_EDGE('',*,*,#215,.T.);+#215 = EDGE_CURVE('',#188,#216,#218,.T.);+#216 = VERTEX_POINT('',#217);+#217 = CARTESIAN_POINT('',(-0.35,1.,0.));+#218 = SURFACE_CURVE('',#219,(#223,#230),.PCURVE_S1.);+#219 = LINE('',#220,#221);+#220 = CARTESIAN_POINT('',(0.6,1.,0.));+#221 = VECTOR('',#222,1.);+#222 = DIRECTION('',(-1.,2.22044604925E-16,0.));+#223 = PCURVE('',#66,#224);+#224 = DEFINITIONAL_REPRESENTATION('',(#225),#229);+#225 = LINE('',#226,#227);+#226 = CARTESIAN_POINT('',(-1.025488034286,0.583879223032));+#227 = VECTOR('',#228,1.);+#228 = DIRECTION('',(0.,-1.));+#229 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#230 = PCURVE('',#231,#236);+#231 = PLANE('',#232);+#232 = AXIS2_PLACEMENT_3D('',#233,#234,#235);+#233 = CARTESIAN_POINT('',(0.6,1.,0.));+#234 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#235 = DIRECTION('',(-1.,2.22044604925E-16,0.));+#236 = DEFINITIONAL_REPRESENTATION('',(#237),#241);+#237 = LINE('',#238,#239);+#238 = CARTESIAN_POINT('',(0.,0.));+#239 = VECTOR('',#240,1.);+#240 = DIRECTION('',(1.,0.));+#241 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#242 = ORIENTED_EDGE('',*,*,#243,.T.);+#243 = EDGE_CURVE('',#216,#44,#244,.T.);+#244 = SURFACE_CURVE('',#245,(#249,#256),.PCURVE_S1.);+#245 = LINE('',#246,#247);+#246 = CARTESIAN_POINT('',(-0.35,1.,0.));+#247 = VECTOR('',#248,1.);+#248 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#249 = PCURVE('',#66,#250);+#250 = DEFINITIONAL_REPRESENTATION('',(#251),#255);+#251 = LINE('',#252,#253);+#252 = CARTESIAN_POINT('',(-1.025488034286,-0.366120776968));+#253 = VECTOR('',#254,1.);+#254 = DIRECTION('',(0.707106781187,-0.707106781187));+#255 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#256 = PCURVE('',#94,#257);+#257 = DEFINITIONAL_REPRESENTATION('',(#258),#262);+#258 = LINE('',#259,#260);+#259 = CARTESIAN_POINT('',(0.,0.));+#260 = VECTOR('',#261,1.);+#261 = DIRECTION('',(1.,0.));+#262 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#263 = ADVANCED_FACE('',(#264),#94,.F.);+#264 = FACE_BOUND('',#265,.F.);+#265 = EDGE_LOOP('',(#266,#267,#290,#311));+#266 = ORIENTED_EDGE('',*,*,#243,.F.);+#267 = ORIENTED_EDGE('',*,*,#268,.T.);+#268 = EDGE_CURVE('',#216,#269,#271,.T.);+#269 = VERTEX_POINT('',#270);+#270 = CARTESIAN_POINT('',(-0.35,1.,2.E-02));+#271 = SURFACE_CURVE('',#272,(#276,#283),.PCURVE_S1.);+#272 = LINE('',#273,#274);+#273 = CARTESIAN_POINT('',(-0.35,1.,0.));+#274 = VECTOR('',#275,1.);+#275 = DIRECTION('',(0.,0.,1.));+#276 = PCURVE('',#94,#277);+#277 = DEFINITIONAL_REPRESENTATION('',(#278),#282);+#278 = LINE('',#279,#280);+#279 = CARTESIAN_POINT('',(0.,0.));+#280 = VECTOR('',#281,1.);+#281 = DIRECTION('',(0.,-1.));+#282 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#283 = PCURVE('',#231,#284);+#284 = DEFINITIONAL_REPRESENTATION('',(#285),#289);+#285 = LINE('',#286,#287);+#286 = CARTESIAN_POINT('',(0.95,0.));+#287 = VECTOR('',#288,1.);+#288 = DIRECTION('',(0.,-1.));+#289 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#290 = ORIENTED_EDGE('',*,*,#291,.F.);+#291 = EDGE_CURVE('',#79,#269,#292,.T.);+#292 = SURFACE_CURVE('',#293,(#297,#304),.PCURVE_S1.);+#293 = LINE('',#294,#295);+#294 = CARTESIAN_POINT('',(-0.5125,0.8375,2.E-02));+#295 = VECTOR('',#296,1.);+#296 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#297 = PCURVE('',#94,#298);+#298 = DEFINITIONAL_REPRESENTATION('',(#299),#303);+#299 = LINE('',#300,#301);+#300 = CARTESIAN_POINT('',(0.229809703886,-2.E-02));+#301 = VECTOR('',#302,1.);+#302 = DIRECTION('',(-1.,0.));+#303 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#304 = PCURVE('',#122,#305);+#305 = DEFINITIONAL_REPRESENTATION('',(#306),#310);+#306 = LINE('',#307,#308);+#307 = CARTESIAN_POINT('',(0.6525,0.9775));+#308 = VECTOR('',#309,1.);+#309 = DIRECTION('',(-0.707106781187,0.707106781187));+#310 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#311 = ORIENTED_EDGE('',*,*,#78,.F.);+#312 = ADVANCED_FACE('',(#313,#1547),#122,.F.);+#313 = FACE_BOUND('',#314,.F.);+#314 = EDGE_LOOP('',(#315,#345,#373,#401,#429,#462,#490,#513,#541,#574,+ #602,#625,#653,#686,#714,#737,#765,#798,#826,#849,#877,#910,#938,+ #961,#989,#1012,#1040,#1073,#1101,#1124,#1152,#1185,#1213,#1236,+ #1264,#1297,#1325,#1348,#1376,#1409,#1437,#1460,#1488,#1521));+#315 = ORIENTED_EDGE('',*,*,#316,.F.);+#316 = EDGE_CURVE('',#317,#319,#321,.T.);+#317 = VERTEX_POINT('',#318);+#318 = CARTESIAN_POINT('',(1.49,1.49,2.E-02));+#319 = VERTEX_POINT('',#320);+#320 = CARTESIAN_POINT('',(1.49,1.125,2.E-02));+#321 = SURFACE_CURVE('',#322,(#326,#333),.PCURVE_S1.);+#322 = LINE('',#323,#324);+#323 = CARTESIAN_POINT('',(1.49,1.49,2.E-02));+#324 = VECTOR('',#325,1.);+#325 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#326 = PCURVE('',#122,#327);+#327 = DEFINITIONAL_REPRESENTATION('',(#328),#332);+#328 = LINE('',#329,#330);+#329 = CARTESIAN_POINT('',(-6.616929226765E-16,2.98));+#330 = VECTOR('',#331,1.);+#331 = DIRECTION('',(1.,0.));+#332 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#333 = PCURVE('',#334,#339);+#334 = PLANE('',#335);+#335 = AXIS2_PLACEMENT_3D('',#336,#337,#338);+#336 = CARTESIAN_POINT('',(1.49,1.49,2.E-02));+#337 = DIRECTION('',(1.,-2.22044604925E-16,0.));+#338 = DIRECTION('',(0.,0.,1.));+#339 = DEFINITIONAL_REPRESENTATION('',(#340),#344);+#340 = LINE('',#341,#342);+#341 = CARTESIAN_POINT('',(0.,0.));+#342 = VECTOR('',#343,1.);+#343 = DIRECTION('',(0.,1.));+#344 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#345 = ORIENTED_EDGE('',*,*,#346,.F.);+#346 = EDGE_CURVE('',#347,#317,#349,.T.);+#347 = VERTEX_POINT('',#348);+#348 = CARTESIAN_POINT('',(-1.49,1.49,2.E-02));+#349 = SURFACE_CURVE('',#350,(#354,#361),.PCURVE_S1.);+#350 = LINE('',#351,#352);+#351 = CARTESIAN_POINT('',(-1.49,1.49,2.E-02));+#352 = VECTOR('',#353,1.);+#353 = DIRECTION('',(1.,-2.22044604925E-16,0.));+#354 = PCURVE('',#122,#355);+#355 = DEFINITIONAL_REPRESENTATION('',(#356),#360);+#356 = LINE('',#357,#358);+#357 = CARTESIAN_POINT('',(0.,0.));+#358 = VECTOR('',#359,1.);+#359 = DIRECTION('',(0.,1.));+#360 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#361 = PCURVE('',#362,#367);+#362 = PLANE('',#363);+#363 = AXIS2_PLACEMENT_3D('',#364,#365,#366);+#364 = CARTESIAN_POINT('',(-1.49,1.49,2.E-02));+#365 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#366 = DIRECTION('',(0.,0.,1.));+#367 = DEFINITIONAL_REPRESENTATION('',(#368),#372);+#368 = LINE('',#369,#370);+#369 = CARTESIAN_POINT('',(0.,0.));+#370 = VECTOR('',#371,1.);+#371 = DIRECTION('',(0.,-1.));+#372 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#373 = ORIENTED_EDGE('',*,*,#374,.T.);+#374 = EDGE_CURVE('',#347,#375,#377,.T.);+#375 = VERTEX_POINT('',#376);+#376 = CARTESIAN_POINT('',(-1.49,1.125,2.E-02));+#377 = SURFACE_CURVE('',#378,(#382,#389),.PCURVE_S1.);+#378 = LINE('',#379,#380);+#379 = CARTESIAN_POINT('',(-1.49,1.49,2.E-02));+#380 = VECTOR('',#381,1.);+#381 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#382 = PCURVE('',#122,#383);+#383 = DEFINITIONAL_REPRESENTATION('',(#384),#388);+#384 = LINE('',#385,#386);+#385 = CARTESIAN_POINT('',(0.,0.));+#386 = VECTOR('',#387,1.);+#387 = DIRECTION('',(1.,0.));+#388 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#389 = PCURVE('',#390,#395);+#390 = PLANE('',#391);+#391 = AXIS2_PLACEMENT_3D('',#392,#393,#394);+#392 = CARTESIAN_POINT('',(-1.49,1.49,2.E-02));+#393 = DIRECTION('',(1.,-2.22044604925E-16,0.));+#394 = DIRECTION('',(0.,0.,1.));+#395 = DEFINITIONAL_REPRESENTATION('',(#396),#400);+#396 = LINE('',#397,#398);+#397 = CARTESIAN_POINT('',(0.,0.));+#398 = VECTOR('',#399,1.);+#399 = DIRECTION('',(0.,1.));+#400 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#401 = ORIENTED_EDGE('',*,*,#402,.T.);+#402 = EDGE_CURVE('',#375,#403,#405,.T.);+#403 = VERTEX_POINT('',#404);+#404 = CARTESIAN_POINT('',(-1.225,1.125,2.E-02));+#405 = SURFACE_CURVE('',#406,(#410,#417),.PCURVE_S1.);+#406 = LINE('',#407,#408);+#407 = CARTESIAN_POINT('',(-1.3575,1.125,2.E-02));+#408 = VECTOR('',#409,1.);+#409 = DIRECTION('',(1.,-4.669739647545E-16,0.));+#410 = PCURVE('',#122,#411);+#411 = DEFINITIONAL_REPRESENTATION('',(#412),#416);+#412 = LINE('',#413,#414);+#413 = CARTESIAN_POINT('',(0.365,0.1325));+#414 = VECTOR('',#415,1.);+#415 = DIRECTION('',(2.449293598295E-16,1.));+#416 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#417 = PCURVE('',#418,#423);+#418 = PLANE('',#419);+#419 = AXIS2_PLACEMENT_3D('',#420,#421,#422);+#420 = CARTESIAN_POINT('',(-1.225,1.125,0.));+#421 = DIRECTION('',(-4.669739647545E-16,-1.,0.));+#422 = DIRECTION('',(-1.,4.669739647545E-16,0.));+#423 = DEFINITIONAL_REPRESENTATION('',(#424),#428);+#424 = LINE('',#425,#426);+#425 = CARTESIAN_POINT('',(0.1325,-2.E-02));+#426 = VECTOR('',#427,1.);+#427 = DIRECTION('',(-1.,-0.));+#428 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#429 = ORIENTED_EDGE('',*,*,#430,.T.);+#430 = EDGE_CURVE('',#403,#431,#433,.T.);+#431 = VERTEX_POINT('',#432);+#432 = CARTESIAN_POINT('',(-1.225,0.875,2.E-02));+#433 = SURFACE_CURVE('',#434,(#439,#450),.PCURVE_S1.);+#434 = CIRCLE('',#435,0.125);+#435 = AXIS2_PLACEMENT_3D('',#436,#437,#438);+#436 = CARTESIAN_POINT('',(-1.225,1.,2.E-02));+#437 = DIRECTION('',(-0.,0.,-1.));+#438 = DIRECTION('',(-4.669739647545E-16,-1.,0.));+#439 = PCURVE('',#122,#440);+#440 = DEFINITIONAL_REPRESENTATION('',(#441),#449);+#441 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#442,#443,#444,#445,#446,#447+,#448),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(+ -2.094395102393,0.,2.094395102393,4.188790204786,6.28318530718,+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#442 = CARTESIAN_POINT('',(0.615,0.265));+#443 = CARTESIAN_POINT('',(0.615,4.849364905389E-02));+#444 = CARTESIAN_POINT('',(0.4275,0.156746824527));+#445 = CARTESIAN_POINT('',(0.24,0.265));+#446 = CARTESIAN_POINT('',(0.4275,0.373253175473));+#447 = CARTESIAN_POINT('',(0.615,0.481506350946));+#448 = CARTESIAN_POINT('',(0.615,0.265));+#449 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#450 = PCURVE('',#451,#456);+#451 = CYLINDRICAL_SURFACE('',#452,0.125);+#452 = AXIS2_PLACEMENT_3D('',#453,#454,#455);+#453 = CARTESIAN_POINT('',(-1.225,1.,0.));+#454 = DIRECTION('',(0.,0.,-1.));+#455 = DIRECTION('',(-4.669739647545E-16,-1.,-0.));+#456 = DEFINITIONAL_REPRESENTATION('',(#457),#461);+#457 = LINE('',#458,#459);+#458 = CARTESIAN_POINT('',(-4.138911435803E-13,-2.E-02));+#459 = VECTOR('',#460,1.);+#460 = DIRECTION('',(1.,-0.));+#461 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#462 = ORIENTED_EDGE('',*,*,#463,.T.);+#463 = EDGE_CURVE('',#431,#464,#466,.T.);+#464 = VERTEX_POINT('',#465);+#465 = CARTESIAN_POINT('',(-1.49,0.875,2.E-02));+#466 = SURFACE_CURVE('',#467,(#471,#478),.PCURVE_S1.);+#467 = LINE('',#468,#469);+#468 = CARTESIAN_POINT('',(-1.495,0.875,2.E-02));+#469 = VECTOR('',#470,1.);+#470 = DIRECTION('',(-1.,4.669739647545E-16,0.));+#471 = PCURVE('',#122,#472);+#472 = DEFINITIONAL_REPRESENTATION('',(#473),#477);+#473 = LINE('',#474,#475);+#474 = CARTESIAN_POINT('',(0.615,-5.E-03));+#475 = VECTOR('',#476,1.);+#476 = DIRECTION('',(-2.449293598295E-16,-1.));+#477 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#478 = PCURVE('',#479,#484);+#479 = PLANE('',#480);+#480 = AXIS2_PLACEMENT_3D('',#481,#482,#483);+#481 = CARTESIAN_POINT('',(-1.5,0.875,0.));+#482 = DIRECTION('',(4.669739647545E-16,1.,0.));+#483 = DIRECTION('',(1.,-4.669739647545E-16,0.));+#484 = DEFINITIONAL_REPRESENTATION('',(#485),#489);+#485 = LINE('',#486,#487);+#486 = CARTESIAN_POINT('',(5.E-03,-2.E-02));+#487 = VECTOR('',#488,1.);+#488 = DIRECTION('',(-1.,0.));+#489 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#490 = ORIENTED_EDGE('',*,*,#491,.T.);+#491 = EDGE_CURVE('',#464,#492,#494,.T.);+#492 = VERTEX_POINT('',#493);+#493 = CARTESIAN_POINT('',(-1.49,0.625,2.E-02));+#494 = SURFACE_CURVE('',#495,(#499,#506),.PCURVE_S1.);+#495 = LINE('',#496,#497);+#496 = CARTESIAN_POINT('',(-1.49,1.49,2.E-02));+#497 = VECTOR('',#498,1.);+#498 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#499 = PCURVE('',#122,#500);+#500 = DEFINITIONAL_REPRESENTATION('',(#501),#505);+#501 = LINE('',#502,#503);+#502 = CARTESIAN_POINT('',(0.,0.));+#503 = VECTOR('',#504,1.);+#504 = DIRECTION('',(1.,0.));+#505 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#506 = PCURVE('',#390,#507);+#507 = DEFINITIONAL_REPRESENTATION('',(#508),#512);+#508 = LINE('',#509,#510);+#509 = CARTESIAN_POINT('',(0.,0.));+#510 = VECTOR('',#511,1.);+#511 = DIRECTION('',(0.,1.));+#512 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#513 = ORIENTED_EDGE('',*,*,#514,.T.);+#514 = EDGE_CURVE('',#492,#515,#517,.T.);+#515 = VERTEX_POINT('',#516);+#516 = CARTESIAN_POINT('',(-1.225,0.625,2.E-02));+#517 = SURFACE_CURVE('',#518,(#522,#529),.PCURVE_S1.);+#518 = LINE('',#519,#520);+#519 = CARTESIAN_POINT('',(-1.3575,0.625,2.E-02));+#520 = VECTOR('',#521,1.);+#521 = DIRECTION('',(1.,-4.669739647545E-16,0.));+#522 = PCURVE('',#122,#523);+#523 = DEFINITIONAL_REPRESENTATION('',(#524),#528);+#524 = LINE('',#525,#526);+#525 = CARTESIAN_POINT('',(0.865,0.1325));+#526 = VECTOR('',#527,1.);+#527 = DIRECTION('',(2.449293598295E-16,1.));+#528 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#529 = PCURVE('',#530,#535);+#530 = PLANE('',#531);+#531 = AXIS2_PLACEMENT_3D('',#532,#533,#534);+#532 = CARTESIAN_POINT('',(-1.225,0.625,0.));+#533 = DIRECTION('',(-4.669739647545E-16,-1.,0.));+#534 = DIRECTION('',(-1.,4.669739647545E-16,0.));+#535 = DEFINITIONAL_REPRESENTATION('',(#536),#540);+#536 = LINE('',#537,#538);+#537 = CARTESIAN_POINT('',(0.1325,-2.E-02));+#538 = VECTOR('',#539,1.);+#539 = DIRECTION('',(-1.,-0.));+#540 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#541 = ORIENTED_EDGE('',*,*,#542,.T.);+#542 = EDGE_CURVE('',#515,#543,#545,.T.);+#543 = VERTEX_POINT('',#544);+#544 = CARTESIAN_POINT('',(-1.225,0.375,2.E-02));+#545 = SURFACE_CURVE('',#546,(#551,#562),.PCURVE_S1.);+#546 = CIRCLE('',#547,0.125);+#547 = AXIS2_PLACEMENT_3D('',#548,#549,#550);+#548 = CARTESIAN_POINT('',(-1.225,0.5,2.E-02));+#549 = DIRECTION('',(-0.,0.,-1.));+#550 = DIRECTION('',(-4.669739647545E-16,-1.,0.));+#551 = PCURVE('',#122,#552);+#552 = DEFINITIONAL_REPRESENTATION('',(#553),#561);+#553 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#554,#555,#556,#557,#558,#559+,#560),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(+ -2.094395102393,0.,2.094395102393,4.188790204786,6.28318530718,+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#554 = CARTESIAN_POINT('',(1.115,0.265));+#555 = CARTESIAN_POINT('',(1.115,4.849364905389E-02));+#556 = CARTESIAN_POINT('',(0.9275,0.156746824527));+#557 = CARTESIAN_POINT('',(0.74,0.265));+#558 = CARTESIAN_POINT('',(0.9275,0.373253175473));+#559 = CARTESIAN_POINT('',(1.115,0.481506350946));+#560 = CARTESIAN_POINT('',(1.115,0.265));+#561 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#562 = PCURVE('',#563,#568);+#563 = CYLINDRICAL_SURFACE('',#564,0.125);+#564 = AXIS2_PLACEMENT_3D('',#565,#566,#567);+#565 = CARTESIAN_POINT('',(-1.225,0.5,0.));+#566 = DIRECTION('',(0.,0.,-1.));+#567 = DIRECTION('',(-4.669739647545E-16,-1.,-0.));+#568 = DEFINITIONAL_REPRESENTATION('',(#569),#573);+#569 = LINE('',#570,#571);+#570 = CARTESIAN_POINT('',(-4.138911435803E-13,-2.E-02));+#571 = VECTOR('',#572,1.);+#572 = DIRECTION('',(1.,-0.));+#573 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#574 = ORIENTED_EDGE('',*,*,#575,.T.);+#575 = EDGE_CURVE('',#543,#576,#578,.T.);+#576 = VERTEX_POINT('',#577);+#577 = CARTESIAN_POINT('',(-1.49,0.375,2.E-02));+#578 = SURFACE_CURVE('',#579,(#583,#590),.PCURVE_S1.);+#579 = LINE('',#580,#581);+#580 = CARTESIAN_POINT('',(-1.495,0.375,2.E-02));+#581 = VECTOR('',#582,1.);+#582 = DIRECTION('',(-1.,4.669739647545E-16,0.));+#583 = PCURVE('',#122,#584);+#584 = DEFINITIONAL_REPRESENTATION('',(#585),#589);+#585 = LINE('',#586,#587);+#586 = CARTESIAN_POINT('',(1.115,-5.E-03));+#587 = VECTOR('',#588,1.);+#588 = DIRECTION('',(-2.449293598295E-16,-1.));+#589 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#590 = PCURVE('',#591,#596);+#591 = PLANE('',#592);+#592 = AXIS2_PLACEMENT_3D('',#593,#594,#595);+#593 = CARTESIAN_POINT('',(-1.5,0.375,0.));+#594 = DIRECTION('',(4.669739647545E-16,1.,0.));+#595 = DIRECTION('',(1.,-4.669739647545E-16,0.));+#596 = DEFINITIONAL_REPRESENTATION('',(#597),#601);+#597 = LINE('',#598,#599);+#598 = CARTESIAN_POINT('',(5.E-03,-2.E-02));+#599 = VECTOR('',#600,1.);+#600 = DIRECTION('',(-1.,0.));+#601 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#602 = ORIENTED_EDGE('',*,*,#603,.T.);+#603 = EDGE_CURVE('',#576,#604,#606,.T.);+#604 = VERTEX_POINT('',#605);+#605 = CARTESIAN_POINT('',(-1.49,0.125,2.E-02));+#606 = SURFACE_CURVE('',#607,(#611,#618),.PCURVE_S1.);+#607 = LINE('',#608,#609);+#608 = CARTESIAN_POINT('',(-1.49,1.49,2.E-02));+#609 = VECTOR('',#610,1.);+#610 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#611 = PCURVE('',#122,#612);+#612 = DEFINITIONAL_REPRESENTATION('',(#613),#617);+#613 = LINE('',#614,#615);+#614 = CARTESIAN_POINT('',(0.,0.));+#615 = VECTOR('',#616,1.);+#616 = DIRECTION('',(1.,0.));+#617 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#618 = PCURVE('',#390,#619);+#619 = DEFINITIONAL_REPRESENTATION('',(#620),#624);+#620 = LINE('',#621,#622);+#621 = CARTESIAN_POINT('',(0.,0.));+#622 = VECTOR('',#623,1.);+#623 = DIRECTION('',(0.,1.));+#624 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#625 = ORIENTED_EDGE('',*,*,#626,.T.);+#626 = EDGE_CURVE('',#604,#627,#629,.T.);+#627 = VERTEX_POINT('',#628);+#628 = CARTESIAN_POINT('',(-1.225,0.125,2.E-02));+#629 = SURFACE_CURVE('',#630,(#634,#641),.PCURVE_S1.);+#630 = LINE('',#631,#632);+#631 = CARTESIAN_POINT('',(-1.3575,0.125,2.E-02));+#632 = VECTOR('',#633,1.);+#633 = DIRECTION('',(1.,-4.669739647545E-16,0.));+#634 = PCURVE('',#122,#635);+#635 = DEFINITIONAL_REPRESENTATION('',(#636),#640);+#636 = LINE('',#637,#638);+#637 = CARTESIAN_POINT('',(1.365,0.1325));+#638 = VECTOR('',#639,1.);+#639 = DIRECTION('',(2.449293598295E-16,1.));+#640 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#641 = PCURVE('',#642,#647);+#642 = PLANE('',#643);+#643 = AXIS2_PLACEMENT_3D('',#644,#645,#646);+#644 = CARTESIAN_POINT('',(-1.225,0.125,0.));+#645 = DIRECTION('',(-4.669739647545E-16,-1.,0.));+#646 = DIRECTION('',(-1.,4.669739647545E-16,0.));+#647 = DEFINITIONAL_REPRESENTATION('',(#648),#652);+#648 = LINE('',#649,#650);+#649 = CARTESIAN_POINT('',(0.1325,-2.E-02));+#650 = VECTOR('',#651,1.);+#651 = DIRECTION('',(-1.,-0.));+#652 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#653 = ORIENTED_EDGE('',*,*,#654,.T.);+#654 = EDGE_CURVE('',#627,#655,#657,.T.);+#655 = VERTEX_POINT('',#656);+#656 = CARTESIAN_POINT('',(-1.225,-0.125,2.E-02));+#657 = SURFACE_CURVE('',#658,(#663,#674),.PCURVE_S1.);+#658 = CIRCLE('',#659,0.125);+#659 = AXIS2_PLACEMENT_3D('',#660,#661,#662);+#660 = CARTESIAN_POINT('',(-1.225,4.662936703426E-16,2.E-02));+#661 = DIRECTION('',(-0.,0.,-1.));+#662 = DIRECTION('',(-4.669739647545E-16,-1.,0.));+#663 = PCURVE('',#122,#664);+#664 = DEFINITIONAL_REPRESENTATION('',(#665),#673);+#665 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#666,#667,#668,#669,#670,#671+,#672),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(+ -2.094395102393,0.,2.094395102393,4.188790204786,6.28318530718,+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#666 = CARTESIAN_POINT('',(1.615,0.265));+#667 = CARTESIAN_POINT('',(1.615,4.849364905389E-02));+#668 = CARTESIAN_POINT('',(1.4275,0.156746824527));+#669 = CARTESIAN_POINT('',(1.24,0.265));+#670 = CARTESIAN_POINT('',(1.4275,0.373253175473));+#671 = CARTESIAN_POINT('',(1.615,0.481506350946));+#672 = CARTESIAN_POINT('',(1.615,0.265));+#673 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#674 = PCURVE('',#675,#680);+#675 = CYLINDRICAL_SURFACE('',#676,0.125);+#676 = AXIS2_PLACEMENT_3D('',#677,#678,#679);+#677 = CARTESIAN_POINT('',(-1.225,4.440892098501E-16,0.));+#678 = DIRECTION('',(0.,0.,-1.));+#679 = DIRECTION('',(-4.669739647545E-16,-1.,-0.));+#680 = DEFINITIONAL_REPRESENTATION('',(#681),#685);+#681 = LINE('',#682,#683);+#682 = CARTESIAN_POINT('',(-4.138911435803E-13,-2.E-02));+#683 = VECTOR('',#684,1.);+#684 = DIRECTION('',(1.,-0.));+#685 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#686 = ORIENTED_EDGE('',*,*,#687,.T.);+#687 = EDGE_CURVE('',#655,#688,#690,.T.);+#688 = VERTEX_POINT('',#689);+#689 = CARTESIAN_POINT('',(-1.49,-0.125,2.E-02));+#690 = SURFACE_CURVE('',#691,(#695,#702),.PCURVE_S1.);+#691 = LINE('',#692,#693);+#692 = CARTESIAN_POINT('',(-1.495,-0.125,2.E-02));+#693 = VECTOR('',#694,1.);+#694 = DIRECTION('',(-1.,4.669739647545E-16,0.));+#695 = PCURVE('',#122,#696);+#696 = DEFINITIONAL_REPRESENTATION('',(#697),#701);+#697 = LINE('',#698,#699);+#698 = CARTESIAN_POINT('',(1.615,-5.E-03));+#699 = VECTOR('',#700,1.);+#700 = DIRECTION('',(-2.449293598295E-16,-1.));+#701 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#702 = PCURVE('',#703,#708);+#703 = PLANE('',#704);+#704 = AXIS2_PLACEMENT_3D('',#705,#706,#707);+#705 = CARTESIAN_POINT('',(-1.5,-0.125,0.));+#706 = DIRECTION('',(4.669739647545E-16,1.,0.));+#707 = DIRECTION('',(1.,-4.669739647545E-16,0.));+#708 = DEFINITIONAL_REPRESENTATION('',(#709),#713);+#709 = LINE('',#710,#711);+#710 = CARTESIAN_POINT('',(5.E-03,-2.E-02));+#711 = VECTOR('',#712,1.);+#712 = DIRECTION('',(-1.,0.));+#713 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#714 = ORIENTED_EDGE('',*,*,#715,.T.);+#715 = EDGE_CURVE('',#688,#716,#718,.T.);+#716 = VERTEX_POINT('',#717);+#717 = CARTESIAN_POINT('',(-1.49,-0.375,2.E-02));+#718 = SURFACE_CURVE('',#719,(#723,#730),.PCURVE_S1.);+#719 = LINE('',#720,#721);+#720 = CARTESIAN_POINT('',(-1.49,1.49,2.E-02));+#721 = VECTOR('',#722,1.);+#722 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#723 = PCURVE('',#122,#724);+#724 = DEFINITIONAL_REPRESENTATION('',(#725),#729);+#725 = LINE('',#726,#727);+#726 = CARTESIAN_POINT('',(0.,0.));+#727 = VECTOR('',#728,1.);+#728 = DIRECTION('',(1.,0.));+#729 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#730 = PCURVE('',#390,#731);+#731 = DEFINITIONAL_REPRESENTATION('',(#732),#736);+#732 = LINE('',#733,#734);+#733 = CARTESIAN_POINT('',(0.,0.));+#734 = VECTOR('',#735,1.);+#735 = DIRECTION('',(0.,1.));+#736 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#737 = ORIENTED_EDGE('',*,*,#738,.T.);+#738 = EDGE_CURVE('',#716,#739,#741,.T.);+#739 = VERTEX_POINT('',#740);+#740 = CARTESIAN_POINT('',(-1.225,-0.375,2.E-02));+#741 = SURFACE_CURVE('',#742,(#746,#753),.PCURVE_S1.);+#742 = LINE('',#743,#744);+#743 = CARTESIAN_POINT('',(-1.3575,-0.375,2.E-02));+#744 = VECTOR('',#745,1.);+#745 = DIRECTION('',(1.,-4.669739647545E-16,0.));+#746 = PCURVE('',#122,#747);+#747 = DEFINITIONAL_REPRESENTATION('',(#748),#752);+#748 = LINE('',#749,#750);+#749 = CARTESIAN_POINT('',(1.865,0.1325));+#750 = VECTOR('',#751,1.);+#751 = DIRECTION('',(2.449293598295E-16,1.));+#752 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#753 = PCURVE('',#754,#759);+#754 = PLANE('',#755);+#755 = AXIS2_PLACEMENT_3D('',#756,#757,#758);+#756 = CARTESIAN_POINT('',(-1.225,-0.375,0.));+#757 = DIRECTION('',(-4.669739647545E-16,-1.,0.));+#758 = DIRECTION('',(-1.,4.669739647545E-16,0.));+#759 = DEFINITIONAL_REPRESENTATION('',(#760),#764);+#760 = LINE('',#761,#762);+#761 = CARTESIAN_POINT('',(0.1325,-2.E-02));+#762 = VECTOR('',#763,1.);+#763 = DIRECTION('',(-1.,-0.));+#764 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#765 = ORIENTED_EDGE('',*,*,#766,.T.);+#766 = EDGE_CURVE('',#739,#767,#769,.T.);+#767 = VERTEX_POINT('',#768);+#768 = CARTESIAN_POINT('',(-1.225,-0.625,2.E-02));+#769 = SURFACE_CURVE('',#770,(#775,#786),.PCURVE_S1.);+#770 = CIRCLE('',#771,0.125);+#771 = AXIS2_PLACEMENT_3D('',#772,#773,#774);+#772 = CARTESIAN_POINT('',(-1.225,-0.5,2.E-02));+#773 = DIRECTION('',(-0.,0.,-1.));+#774 = DIRECTION('',(-4.669739647545E-16,-1.,0.));+#775 = PCURVE('',#122,#776);+#776 = DEFINITIONAL_REPRESENTATION('',(#777),#785);+#777 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#778,#779,#780,#781,#782,#783+,#784),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(+ -2.094395102393,0.,2.094395102393,4.188790204786,6.28318530718,+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#778 = CARTESIAN_POINT('',(2.115,0.265));+#779 = CARTESIAN_POINT('',(2.115,4.849364905389E-02));+#780 = CARTESIAN_POINT('',(1.9275,0.156746824527));+#781 = CARTESIAN_POINT('',(1.74,0.265));+#782 = CARTESIAN_POINT('',(1.9275,0.373253175473));+#783 = CARTESIAN_POINT('',(2.115,0.481506350946));+#784 = CARTESIAN_POINT('',(2.115,0.265));+#785 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#786 = PCURVE('',#787,#792);+#787 = CYLINDRICAL_SURFACE('',#788,0.125);+#788 = AXIS2_PLACEMENT_3D('',#789,#790,#791);+#789 = CARTESIAN_POINT('',(-1.225,-0.5,0.));+#790 = DIRECTION('',(0.,0.,-1.));+#791 = DIRECTION('',(-4.669739647545E-16,-1.,-0.));+#792 = DEFINITIONAL_REPRESENTATION('',(#793),#797);+#793 = LINE('',#794,#795);+#794 = CARTESIAN_POINT('',(-4.138911435803E-13,-2.E-02));+#795 = VECTOR('',#796,1.);+#796 = DIRECTION('',(1.,-0.));+#797 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#798 = ORIENTED_EDGE('',*,*,#799,.T.);+#799 = EDGE_CURVE('',#767,#800,#802,.T.);+#800 = VERTEX_POINT('',#801);+#801 = CARTESIAN_POINT('',(-1.49,-0.625,2.E-02));+#802 = SURFACE_CURVE('',#803,(#807,#814),.PCURVE_S1.);+#803 = LINE('',#804,#805);+#804 = CARTESIAN_POINT('',(-1.495,-0.625,2.E-02));+#805 = VECTOR('',#806,1.);+#806 = DIRECTION('',(-1.,4.669739647545E-16,0.));+#807 = PCURVE('',#122,#808);+#808 = DEFINITIONAL_REPRESENTATION('',(#809),#813);+#809 = LINE('',#810,#811);+#810 = CARTESIAN_POINT('',(2.115,-5.E-03));+#811 = VECTOR('',#812,1.);+#812 = DIRECTION('',(-2.449293598295E-16,-1.));+#813 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#814 = PCURVE('',#815,#820);+#815 = PLANE('',#816);+#816 = AXIS2_PLACEMENT_3D('',#817,#818,#819);+#817 = CARTESIAN_POINT('',(-1.5,-0.625,0.));+#818 = DIRECTION('',(4.669739647545E-16,1.,0.));+#819 = DIRECTION('',(1.,-4.669739647545E-16,0.));+#820 = DEFINITIONAL_REPRESENTATION('',(#821),#825);+#821 = LINE('',#822,#823);+#822 = CARTESIAN_POINT('',(5.E-03,-2.E-02));+#823 = VECTOR('',#824,1.);+#824 = DIRECTION('',(-1.,0.));+#825 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#826 = ORIENTED_EDGE('',*,*,#827,.T.);+#827 = EDGE_CURVE('',#800,#828,#830,.T.);+#828 = VERTEX_POINT('',#829);+#829 = CARTESIAN_POINT('',(-1.49,-0.875,2.E-02));+#830 = SURFACE_CURVE('',#831,(#835,#842),.PCURVE_S1.);+#831 = LINE('',#832,#833);+#832 = CARTESIAN_POINT('',(-1.49,1.49,2.E-02));+#833 = VECTOR('',#834,1.);+#834 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#835 = PCURVE('',#122,#836);+#836 = DEFINITIONAL_REPRESENTATION('',(#837),#841);+#837 = LINE('',#838,#839);+#838 = CARTESIAN_POINT('',(0.,0.));+#839 = VECTOR('',#840,1.);+#840 = DIRECTION('',(1.,0.));+#841 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#842 = PCURVE('',#390,#843);+#843 = DEFINITIONAL_REPRESENTATION('',(#844),#848);+#844 = LINE('',#845,#846);+#845 = CARTESIAN_POINT('',(0.,0.));+#846 = VECTOR('',#847,1.);+#847 = DIRECTION('',(0.,1.));+#848 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#849 = ORIENTED_EDGE('',*,*,#850,.T.);+#850 = EDGE_CURVE('',#828,#851,#853,.T.);+#851 = VERTEX_POINT('',#852);+#852 = CARTESIAN_POINT('',(-1.225,-0.875,2.E-02));+#853 = SURFACE_CURVE('',#854,(#858,#865),.PCURVE_S1.);+#854 = LINE('',#855,#856);+#855 = CARTESIAN_POINT('',(-1.3575,-0.875,2.E-02));+#856 = VECTOR('',#857,1.);+#857 = DIRECTION('',(1.,-4.669739647545E-16,0.));+#858 = PCURVE('',#122,#859);+#859 = DEFINITIONAL_REPRESENTATION('',(#860),#864);+#860 = LINE('',#861,#862);+#861 = CARTESIAN_POINT('',(2.365,0.1325));+#862 = VECTOR('',#863,1.);+#863 = DIRECTION('',(2.449293598295E-16,1.));+#864 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#865 = PCURVE('',#866,#871);+#866 = PLANE('',#867);+#867 = AXIS2_PLACEMENT_3D('',#868,#869,#870);+#868 = CARTESIAN_POINT('',(-1.225,-0.875,0.));+#869 = DIRECTION('',(-4.669739647545E-16,-1.,0.));+#870 = DIRECTION('',(-1.,4.669739647545E-16,0.));+#871 = DEFINITIONAL_REPRESENTATION('',(#872),#876);+#872 = LINE('',#873,#874);+#873 = CARTESIAN_POINT('',(0.1325,-2.E-02));+#874 = VECTOR('',#875,1.);+#875 = DIRECTION('',(-1.,-0.));+#876 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#877 = ORIENTED_EDGE('',*,*,#878,.T.);+#878 = EDGE_CURVE('',#851,#879,#881,.T.);+#879 = VERTEX_POINT('',#880);+#880 = CARTESIAN_POINT('',(-1.225,-1.125,2.E-02));+#881 = SURFACE_CURVE('',#882,(#887,#898),.PCURVE_S1.);+#882 = CIRCLE('',#883,0.125);+#883 = AXIS2_PLACEMENT_3D('',#884,#885,#886);+#884 = CARTESIAN_POINT('',(-1.225,-1.,2.E-02));+#885 = DIRECTION('',(-0.,0.,-1.));+#886 = DIRECTION('',(-4.669739647545E-16,-1.,0.));+#887 = PCURVE('',#122,#888);+#888 = DEFINITIONAL_REPRESENTATION('',(#889),#897);+#889 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#890,#891,#892,#893,#894,#895+,#896),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(+ -2.094395102393,0.,2.094395102393,4.188790204786,6.28318530718,+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#890 = CARTESIAN_POINT('',(2.615,0.265));+#891 = CARTESIAN_POINT('',(2.615,4.849364905389E-02));+#892 = CARTESIAN_POINT('',(2.4275,0.156746824527));+#893 = CARTESIAN_POINT('',(2.24,0.265));+#894 = CARTESIAN_POINT('',(2.4275,0.373253175473));+#895 = CARTESIAN_POINT('',(2.615,0.481506350946));+#896 = CARTESIAN_POINT('',(2.615,0.265));+#897 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#898 = PCURVE('',#899,#904);+#899 = CYLINDRICAL_SURFACE('',#900,0.125);+#900 = AXIS2_PLACEMENT_3D('',#901,#902,#903);+#901 = CARTESIAN_POINT('',(-1.225,-1.,0.));+#902 = DIRECTION('',(0.,0.,-1.));+#903 = DIRECTION('',(-4.669739647545E-16,-1.,-0.));+#904 = DEFINITIONAL_REPRESENTATION('',(#905),#909);+#905 = LINE('',#906,#907);+#906 = CARTESIAN_POINT('',(-4.138911435803E-13,-2.E-02));+#907 = VECTOR('',#908,1.);+#908 = DIRECTION('',(1.,-0.));+#909 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#910 = ORIENTED_EDGE('',*,*,#911,.T.);+#911 = EDGE_CURVE('',#879,#912,#914,.T.);+#912 = VERTEX_POINT('',#913);+#913 = CARTESIAN_POINT('',(-1.49,-1.125,2.E-02));+#914 = SURFACE_CURVE('',#915,(#919,#926),.PCURVE_S1.);+#915 = LINE('',#916,#917);+#916 = CARTESIAN_POINT('',(-1.495,-1.125,2.E-02));+#917 = VECTOR('',#918,1.);+#918 = DIRECTION('',(-1.,4.669739647545E-16,0.));+#919 = PCURVE('',#122,#920);+#920 = DEFINITIONAL_REPRESENTATION('',(#921),#925);+#921 = LINE('',#922,#923);+#922 = CARTESIAN_POINT('',(2.615,-5.E-03));+#923 = VECTOR('',#924,1.);+#924 = DIRECTION('',(-2.449293598295E-16,-1.));+#925 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#926 = PCURVE('',#927,#932);+#927 = PLANE('',#928);+#928 = AXIS2_PLACEMENT_3D('',#929,#930,#931);+#929 = CARTESIAN_POINT('',(-1.5,-1.125,0.));+#930 = DIRECTION('',(4.669739647545E-16,1.,0.));+#931 = DIRECTION('',(1.,-4.669739647545E-16,0.));+#932 = DEFINITIONAL_REPRESENTATION('',(#933),#937);+#933 = LINE('',#934,#935);+#934 = CARTESIAN_POINT('',(5.E-03,-2.E-02));+#935 = VECTOR('',#936,1.);+#936 = DIRECTION('',(-1.,0.));+#937 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#938 = ORIENTED_EDGE('',*,*,#939,.T.);+#939 = EDGE_CURVE('',#912,#940,#942,.T.);+#940 = VERTEX_POINT('',#941);+#941 = CARTESIAN_POINT('',(-1.49,-1.49,2.E-02));+#942 = SURFACE_CURVE('',#943,(#947,#954),.PCURVE_S1.);+#943 = LINE('',#944,#945);+#944 = CARTESIAN_POINT('',(-1.49,1.49,2.E-02));+#945 = VECTOR('',#946,1.);+#946 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#947 = PCURVE('',#122,#948);+#948 = DEFINITIONAL_REPRESENTATION('',(#949),#953);+#949 = LINE('',#950,#951);+#950 = CARTESIAN_POINT('',(0.,0.));+#951 = VECTOR('',#952,1.);+#952 = DIRECTION('',(1.,0.));+#953 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#954 = PCURVE('',#390,#955);+#955 = DEFINITIONAL_REPRESENTATION('',(#956),#960);+#956 = LINE('',#957,#958);+#957 = CARTESIAN_POINT('',(0.,0.));+#958 = VECTOR('',#959,1.);+#959 = DIRECTION('',(0.,1.));+#960 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#961 = ORIENTED_EDGE('',*,*,#962,.T.);+#962 = EDGE_CURVE('',#940,#963,#965,.T.);+#963 = VERTEX_POINT('',#964);+#964 = CARTESIAN_POINT('',(1.49,-1.49,2.E-02));+#965 = SURFACE_CURVE('',#966,(#970,#977),.PCURVE_S1.);+#966 = LINE('',#967,#968);+#967 = CARTESIAN_POINT('',(-1.49,-1.49,2.E-02));+#968 = VECTOR('',#969,1.);+#969 = DIRECTION('',(1.,-2.22044604925E-16,0.));+#970 = PCURVE('',#122,#971);+#971 = DEFINITIONAL_REPRESENTATION('',(#972),#976);+#972 = LINE('',#973,#974);+#973 = CARTESIAN_POINT('',(2.98,6.616929226765E-16));+#974 = VECTOR('',#975,1.);+#975 = DIRECTION('',(0.,1.));+#976 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#977 = PCURVE('',#978,#983);+#978 = PLANE('',#979);+#979 = AXIS2_PLACEMENT_3D('',#980,#981,#982);+#980 = CARTESIAN_POINT('',(-1.49,-1.49,2.E-02));+#981 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#982 = DIRECTION('',(0.,0.,1.));+#983 = DEFINITIONAL_REPRESENTATION('',(#984),#988);+#984 = LINE('',#985,#986);+#985 = CARTESIAN_POINT('',(0.,0.));+#986 = VECTOR('',#987,1.);+#987 = DIRECTION('',(0.,-1.));+#988 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#989 = ORIENTED_EDGE('',*,*,#990,.F.);+#990 = EDGE_CURVE('',#991,#963,#993,.T.);+#991 = VERTEX_POINT('',#992);+#992 = CARTESIAN_POINT('',(1.49,-1.125,2.E-02));+#993 = SURFACE_CURVE('',#994,(#998,#1005),.PCURVE_S1.);+#994 = LINE('',#995,#996);+#995 = CARTESIAN_POINT('',(1.49,1.49,2.E-02));+#996 = VECTOR('',#997,1.);+#997 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#998 = PCURVE('',#122,#999);+#999 = DEFINITIONAL_REPRESENTATION('',(#1000),#1004);+#1000 = LINE('',#1001,#1002);+#1001 = CARTESIAN_POINT('',(-6.616929226765E-16,2.98));+#1002 = VECTOR('',#1003,1.);+#1003 = DIRECTION('',(1.,0.));+#1004 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1005 = PCURVE('',#334,#1006);+#1006 = DEFINITIONAL_REPRESENTATION('',(#1007),#1011);+#1007 = LINE('',#1008,#1009);+#1008 = CARTESIAN_POINT('',(0.,0.));+#1009 = VECTOR('',#1010,1.);+#1010 = DIRECTION('',(0.,1.));+#1011 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1012 = ORIENTED_EDGE('',*,*,#1013,.T.);+#1013 = EDGE_CURVE('',#991,#1014,#1016,.T.);+#1014 = VERTEX_POINT('',#1015);+#1015 = CARTESIAN_POINT('',(1.225,-1.125,2.E-02));+#1016 = SURFACE_CURVE('',#1017,(#1021,#1028),.PCURVE_S1.);+#1017 = LINE('',#1018,#1019);+#1018 = CARTESIAN_POINT('',(-0.1325,-1.125,2.E-02));+#1019 = VECTOR('',#1020,1.);+#1020 = DIRECTION('',(-1.,3.445092848398E-16,0.));+#1021 = PCURVE('',#122,#1022);+#1022 = DEFINITIONAL_REPRESENTATION('',(#1023),#1027);+#1023 = LINE('',#1024,#1025);+#1024 = CARTESIAN_POINT('',(2.615,1.3575));+#1025 = VECTOR('',#1026,1.);+#1026 = DIRECTION('',(-1.224646799148E-16,-1.));+#1027 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1028 = PCURVE('',#1029,#1034);+#1029 = PLANE('',#1030);+#1030 = AXIS2_PLACEMENT_3D('',#1031,#1032,#1033);+#1031 = CARTESIAN_POINT('',(1.225,-1.125,0.));+#1032 = DIRECTION('',(3.445092848398E-16,1.,0.));+#1033 = DIRECTION('',(1.,-3.445092848398E-16,0.));+#1034 = DEFINITIONAL_REPRESENTATION('',(#1035),#1039);+#1035 = LINE('',#1036,#1037);+#1036 = CARTESIAN_POINT('',(-1.3575,-2.E-02));+#1037 = VECTOR('',#1038,1.);+#1038 = DIRECTION('',(-1.,0.));+#1039 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1040 = ORIENTED_EDGE('',*,*,#1041,.T.);+#1041 = EDGE_CURVE('',#1014,#1042,#1044,.T.);+#1042 = VERTEX_POINT('',#1043);+#1043 = CARTESIAN_POINT('',(1.225,-0.875,2.E-02));+#1044 = SURFACE_CURVE('',#1045,(#1050,#1061),.PCURVE_S1.);+#1045 = CIRCLE('',#1046,0.125);+#1046 = AXIS2_PLACEMENT_3D('',#1047,#1048,#1049);+#1047 = CARTESIAN_POINT('',(1.225,-1.,2.E-02));+#1048 = DIRECTION('',(0.,0.,-1.));+#1049 = DIRECTION('',(3.445092848398E-16,1.,0.));+#1050 = PCURVE('',#122,#1051);+#1051 = DEFINITIONAL_REPRESENTATION('',(#1052),#1060);+#1052 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1053,#1054,#1055,#1056,+#1057,#1058,#1059),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#1053 = CARTESIAN_POINT('',(2.365,2.715));+#1054 = CARTESIAN_POINT('',(2.365,2.931506350946));+#1055 = CARTESIAN_POINT('',(2.5525,2.823253175473));+#1056 = CARTESIAN_POINT('',(2.74,2.715));+#1057 = CARTESIAN_POINT('',(2.5525,2.606746824527));+#1058 = CARTESIAN_POINT('',(2.365,2.498493649054));+#1059 = CARTESIAN_POINT('',(2.365,2.715));+#1060 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1061 = PCURVE('',#1062,#1067);+#1062 = CYLINDRICAL_SURFACE('',#1063,0.125);+#1063 = AXIS2_PLACEMENT_3D('',#1064,#1065,#1066);+#1064 = CARTESIAN_POINT('',(1.225,-1.,0.));+#1065 = DIRECTION('',(0.,-0.,-1.));+#1066 = DIRECTION('',(3.445092848398E-16,1.,0.));+#1067 = DEFINITIONAL_REPRESENTATION('',(#1068),#1072);+#1068 = LINE('',#1069,#1070);+#1069 = CARTESIAN_POINT('',(-4.138911435803E-13,-2.E-02));+#1070 = VECTOR('',#1071,1.);+#1071 = DIRECTION('',(1.,-0.));+#1072 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1073 = ORIENTED_EDGE('',*,*,#1074,.T.);+#1074 = EDGE_CURVE('',#1042,#1075,#1077,.T.);+#1075 = VERTEX_POINT('',#1076);+#1076 = CARTESIAN_POINT('',(1.49,-0.875,2.E-02));+#1077 = SURFACE_CURVE('',#1078,(#1082,#1089),.PCURVE_S1.);+#1078 = LINE('',#1079,#1080);+#1079 = CARTESIAN_POINT('',(5.E-03,-0.875,2.E-02));+#1080 = VECTOR('',#1081,1.);+#1081 = DIRECTION('',(1.,-3.445092848398E-16,0.));+#1082 = PCURVE('',#122,#1083);+#1083 = DEFINITIONAL_REPRESENTATION('',(#1084),#1088);+#1084 = LINE('',#1085,#1086);+#1085 = CARTESIAN_POINT('',(2.365,1.495));+#1086 = VECTOR('',#1087,1.);+#1087 = DIRECTION('',(1.224646799148E-16,1.));+#1088 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1089 = PCURVE('',#1090,#1095);+#1090 = PLANE('',#1091);+#1091 = AXIS2_PLACEMENT_3D('',#1092,#1093,#1094);+#1092 = CARTESIAN_POINT('',(1.5,-0.875,0.));+#1093 = DIRECTION('',(-3.445092848398E-16,-1.,0.));+#1094 = DIRECTION('',(-1.,3.445092848398E-16,0.));+#1095 = DEFINITIONAL_REPRESENTATION('',(#1096),#1100);+#1096 = LINE('',#1097,#1098);+#1097 = CARTESIAN_POINT('',(1.495,-2.E-02));+#1098 = VECTOR('',#1099,1.);+#1099 = DIRECTION('',(-1.,-0.));+#1100 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1101 = ORIENTED_EDGE('',*,*,#1102,.F.);+#1102 = EDGE_CURVE('',#1103,#1075,#1105,.T.);+#1103 = VERTEX_POINT('',#1104);+#1104 = CARTESIAN_POINT('',(1.49,-0.625,2.E-02));+#1105 = SURFACE_CURVE('',#1106,(#1110,#1117),.PCURVE_S1.);+#1106 = LINE('',#1107,#1108);+#1107 = CARTESIAN_POINT('',(1.49,1.49,2.E-02));+#1108 = VECTOR('',#1109,1.);+#1109 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#1110 = PCURVE('',#122,#1111);+#1111 = DEFINITIONAL_REPRESENTATION('',(#1112),#1116);+#1112 = LINE('',#1113,#1114);+#1113 = CARTESIAN_POINT('',(-6.616929226765E-16,2.98));+#1114 = VECTOR('',#1115,1.);+#1115 = DIRECTION('',(1.,0.));+#1116 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1117 = PCURVE('',#334,#1118);+#1118 = DEFINITIONAL_REPRESENTATION('',(#1119),#1123);+#1119 = LINE('',#1120,#1121);+#1120 = CARTESIAN_POINT('',(0.,0.));+#1121 = VECTOR('',#1122,1.);+#1122 = DIRECTION('',(0.,1.));+#1123 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1124 = ORIENTED_EDGE('',*,*,#1125,.T.);+#1125 = EDGE_CURVE('',#1103,#1126,#1128,.T.);+#1126 = VERTEX_POINT('',#1127);+#1127 = CARTESIAN_POINT('',(1.225,-0.625,2.E-02));+#1128 = SURFACE_CURVE('',#1129,(#1133,#1140),.PCURVE_S1.);+#1129 = LINE('',#1130,#1131);+#1130 = CARTESIAN_POINT('',(-0.1325,-0.625,2.E-02));+#1131 = VECTOR('',#1132,1.);+#1132 = DIRECTION('',(-1.,3.445092848398E-16,0.));+#1133 = PCURVE('',#122,#1134);+#1134 = DEFINITIONAL_REPRESENTATION('',(#1135),#1139);+#1135 = LINE('',#1136,#1137);+#1136 = CARTESIAN_POINT('',(2.115,1.3575));+#1137 = VECTOR('',#1138,1.);+#1138 = DIRECTION('',(-1.224646799148E-16,-1.));+#1139 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1140 = PCURVE('',#1141,#1146);+#1141 = PLANE('',#1142);+#1142 = AXIS2_PLACEMENT_3D('',#1143,#1144,#1145);+#1143 = CARTESIAN_POINT('',(1.225,-0.625,0.));+#1144 = DIRECTION('',(3.445092848398E-16,1.,0.));+#1145 = DIRECTION('',(1.,-3.445092848398E-16,0.));+#1146 = DEFINITIONAL_REPRESENTATION('',(#1147),#1151);+#1147 = LINE('',#1148,#1149);+#1148 = CARTESIAN_POINT('',(-1.3575,-2.E-02));+#1149 = VECTOR('',#1150,1.);+#1150 = DIRECTION('',(-1.,0.));+#1151 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1152 = ORIENTED_EDGE('',*,*,#1153,.T.);+#1153 = EDGE_CURVE('',#1126,#1154,#1156,.T.);+#1154 = VERTEX_POINT('',#1155);+#1155 = CARTESIAN_POINT('',(1.225,-0.375,2.E-02));+#1156 = SURFACE_CURVE('',#1157,(#1162,#1173),.PCURVE_S1.);+#1157 = CIRCLE('',#1158,0.125);+#1158 = AXIS2_PLACEMENT_3D('',#1159,#1160,#1161);+#1159 = CARTESIAN_POINT('',(1.225,-0.5,2.E-02));+#1160 = DIRECTION('',(0.,0.,-1.));+#1161 = DIRECTION('',(3.445092848398E-16,1.,0.));+#1162 = PCURVE('',#122,#1163);+#1163 = DEFINITIONAL_REPRESENTATION('',(#1164),#1172);+#1164 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1165,#1166,#1167,#1168,+#1169,#1170,#1171),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#1165 = CARTESIAN_POINT('',(1.865,2.715));+#1166 = CARTESIAN_POINT('',(1.865,2.931506350946));+#1167 = CARTESIAN_POINT('',(2.0525,2.823253175473));+#1168 = CARTESIAN_POINT('',(2.24,2.715));+#1169 = CARTESIAN_POINT('',(2.0525,2.606746824527));+#1170 = CARTESIAN_POINT('',(1.865,2.498493649054));+#1171 = CARTESIAN_POINT('',(1.865,2.715));+#1172 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1173 = PCURVE('',#1174,#1179);+#1174 = CYLINDRICAL_SURFACE('',#1175,0.125);+#1175 = AXIS2_PLACEMENT_3D('',#1176,#1177,#1178);+#1176 = CARTESIAN_POINT('',(1.225,-0.5,0.));+#1177 = DIRECTION('',(0.,-0.,-1.));+#1178 = DIRECTION('',(3.445092848398E-16,1.,0.));+#1179 = DEFINITIONAL_REPRESENTATION('',(#1180),#1184);+#1180 = LINE('',#1181,#1182);+#1181 = CARTESIAN_POINT('',(-4.138911435803E-13,-2.E-02));+#1182 = VECTOR('',#1183,1.);+#1183 = DIRECTION('',(1.,-0.));+#1184 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1185 = ORIENTED_EDGE('',*,*,#1186,.T.);+#1186 = EDGE_CURVE('',#1154,#1187,#1189,.T.);+#1187 = VERTEX_POINT('',#1188);+#1188 = CARTESIAN_POINT('',(1.49,-0.375,2.E-02));+#1189 = SURFACE_CURVE('',#1190,(#1194,#1201),.PCURVE_S1.);+#1190 = LINE('',#1191,#1192);+#1191 = CARTESIAN_POINT('',(5.E-03,-0.375,2.E-02));+#1192 = VECTOR('',#1193,1.);+#1193 = DIRECTION('',(1.,-3.445092848398E-16,0.));+#1194 = PCURVE('',#122,#1195);+#1195 = DEFINITIONAL_REPRESENTATION('',(#1196),#1200);+#1196 = LINE('',#1197,#1198);+#1197 = CARTESIAN_POINT('',(1.865,1.495));+#1198 = VECTOR('',#1199,1.);+#1199 = DIRECTION('',(1.224646799148E-16,1.));+#1200 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1201 = PCURVE('',#1202,#1207);+#1202 = PLANE('',#1203);+#1203 = AXIS2_PLACEMENT_3D('',#1204,#1205,#1206);+#1204 = CARTESIAN_POINT('',(1.5,-0.375,0.));+#1205 = DIRECTION('',(-3.445092848398E-16,-1.,0.));+#1206 = DIRECTION('',(-1.,3.445092848398E-16,0.));+#1207 = DEFINITIONAL_REPRESENTATION('',(#1208),#1212);+#1208 = LINE('',#1209,#1210);+#1209 = CARTESIAN_POINT('',(1.495,-2.E-02));+#1210 = VECTOR('',#1211,1.);+#1211 = DIRECTION('',(-1.,-0.));+#1212 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1213 = ORIENTED_EDGE('',*,*,#1214,.F.);+#1214 = EDGE_CURVE('',#1215,#1187,#1217,.T.);+#1215 = VERTEX_POINT('',#1216);+#1216 = CARTESIAN_POINT('',(1.49,-0.125,2.E-02));+#1217 = SURFACE_CURVE('',#1218,(#1222,#1229),.PCURVE_S1.);+#1218 = LINE('',#1219,#1220);+#1219 = CARTESIAN_POINT('',(1.49,1.49,2.E-02));+#1220 = VECTOR('',#1221,1.);+#1221 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#1222 = PCURVE('',#122,#1223);+#1223 = DEFINITIONAL_REPRESENTATION('',(#1224),#1228);+#1224 = LINE('',#1225,#1226);+#1225 = CARTESIAN_POINT('',(-6.616929226765E-16,2.98));+#1226 = VECTOR('',#1227,1.);+#1227 = DIRECTION('',(1.,0.));+#1228 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1229 = PCURVE('',#334,#1230);+#1230 = DEFINITIONAL_REPRESENTATION('',(#1231),#1235);+#1231 = LINE('',#1232,#1233);+#1232 = CARTESIAN_POINT('',(0.,0.));+#1233 = VECTOR('',#1234,1.);+#1234 = DIRECTION('',(0.,1.));+#1235 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1236 = ORIENTED_EDGE('',*,*,#1237,.T.);+#1237 = EDGE_CURVE('',#1215,#1238,#1240,.T.);+#1238 = VERTEX_POINT('',#1239);+#1239 = CARTESIAN_POINT('',(1.225,-0.125,2.E-02));+#1240 = SURFACE_CURVE('',#1241,(#1245,#1252),.PCURVE_S1.);+#1241 = LINE('',#1242,#1243);+#1242 = CARTESIAN_POINT('',(-0.1325,-0.125,2.E-02));+#1243 = VECTOR('',#1244,1.);+#1244 = DIRECTION('',(-1.,3.445092848398E-16,0.));+#1245 = PCURVE('',#122,#1246);+#1246 = DEFINITIONAL_REPRESENTATION('',(#1247),#1251);+#1247 = LINE('',#1248,#1249);+#1248 = CARTESIAN_POINT('',(1.615,1.3575));+#1249 = VECTOR('',#1250,1.);+#1250 = DIRECTION('',(-1.224646799148E-16,-1.));+#1251 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1252 = PCURVE('',#1253,#1258);+#1253 = PLANE('',#1254);+#1254 = AXIS2_PLACEMENT_3D('',#1255,#1256,#1257);+#1255 = CARTESIAN_POINT('',(1.225,-0.125,0.));+#1256 = DIRECTION('',(3.445092848398E-16,1.,0.));+#1257 = DIRECTION('',(1.,-3.445092848398E-16,0.));+#1258 = DEFINITIONAL_REPRESENTATION('',(#1259),#1263);+#1259 = LINE('',#1260,#1261);+#1260 = CARTESIAN_POINT('',(-1.3575,-2.E-02));+#1261 = VECTOR('',#1262,1.);+#1262 = DIRECTION('',(-1.,0.));+#1263 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1264 = ORIENTED_EDGE('',*,*,#1265,.T.);+#1265 = EDGE_CURVE('',#1238,#1266,#1268,.T.);+#1266 = VERTEX_POINT('',#1267);+#1267 = CARTESIAN_POINT('',(1.225,0.125,2.E-02));+#1268 = SURFACE_CURVE('',#1269,(#1274,#1285),.PCURVE_S1.);+#1269 = CIRCLE('',#1270,0.125);+#1270 = AXIS2_PLACEMENT_3D('',#1271,#1272,#1273);+#1271 = CARTESIAN_POINT('',(1.225,-2.720046410332E-16,2.E-02));+#1272 = DIRECTION('',(0.,0.,-1.));+#1273 = DIRECTION('',(3.445092848398E-16,1.,0.));+#1274 = PCURVE('',#122,#1275);+#1275 = DEFINITIONAL_REPRESENTATION('',(#1276),#1284);+#1276 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1277,#1278,#1279,#1280,+#1281,#1282,#1283),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#1277 = CARTESIAN_POINT('',(1.365,2.715));+#1278 = CARTESIAN_POINT('',(1.365,2.931506350946));+#1279 = CARTESIAN_POINT('',(1.5525,2.823253175473));+#1280 = CARTESIAN_POINT('',(1.74,2.715));+#1281 = CARTESIAN_POINT('',(1.5525,2.606746824527));+#1282 = CARTESIAN_POINT('',(1.365,2.498493649054));+#1283 = CARTESIAN_POINT('',(1.365,2.715));+#1284 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1285 = PCURVE('',#1286,#1291);+#1286 = CYLINDRICAL_SURFACE('',#1287,0.125);+#1287 = AXIS2_PLACEMENT_3D('',#1288,#1289,#1290);+#1288 = CARTESIAN_POINT('',(1.225,-2.775557561563E-16,0.));+#1289 = DIRECTION('',(0.,-0.,-1.));+#1290 = DIRECTION('',(3.445092848398E-16,1.,0.));+#1291 = DEFINITIONAL_REPRESENTATION('',(#1292),#1296);+#1292 = LINE('',#1293,#1294);+#1293 = CARTESIAN_POINT('',(-4.138911435803E-13,-2.E-02));+#1294 = VECTOR('',#1295,1.);+#1295 = DIRECTION('',(1.,-0.));+#1296 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1297 = ORIENTED_EDGE('',*,*,#1298,.T.);+#1298 = EDGE_CURVE('',#1266,#1299,#1301,.T.);+#1299 = VERTEX_POINT('',#1300);+#1300 = CARTESIAN_POINT('',(1.49,0.125,2.E-02));+#1301 = SURFACE_CURVE('',#1302,(#1306,#1313),.PCURVE_S1.);+#1302 = LINE('',#1303,#1304);+#1303 = CARTESIAN_POINT('',(5.E-03,0.125,2.E-02));+#1304 = VECTOR('',#1305,1.);+#1305 = DIRECTION('',(1.,-3.445092848398E-16,0.));+#1306 = PCURVE('',#122,#1307);+#1307 = DEFINITIONAL_REPRESENTATION('',(#1308),#1312);+#1308 = LINE('',#1309,#1310);+#1309 = CARTESIAN_POINT('',(1.365,1.495));+#1310 = VECTOR('',#1311,1.);+#1311 = DIRECTION('',(1.224646799148E-16,1.));+#1312 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1313 = PCURVE('',#1314,#1319);+#1314 = PLANE('',#1315);+#1315 = AXIS2_PLACEMENT_3D('',#1316,#1317,#1318);+#1316 = CARTESIAN_POINT('',(1.5,0.125,0.));+#1317 = DIRECTION('',(-3.445092848398E-16,-1.,0.));+#1318 = DIRECTION('',(-1.,3.445092848398E-16,0.));+#1319 = DEFINITIONAL_REPRESENTATION('',(#1320),#1324);+#1320 = LINE('',#1321,#1322);+#1321 = CARTESIAN_POINT('',(1.495,-2.E-02));+#1322 = VECTOR('',#1323,1.);+#1323 = DIRECTION('',(-1.,-0.));+#1324 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1325 = ORIENTED_EDGE('',*,*,#1326,.F.);+#1326 = EDGE_CURVE('',#1327,#1299,#1329,.T.);+#1327 = VERTEX_POINT('',#1328);+#1328 = CARTESIAN_POINT('',(1.49,0.375,2.E-02));+#1329 = SURFACE_CURVE('',#1330,(#1334,#1341),.PCURVE_S1.);+#1330 = LINE('',#1331,#1332);+#1331 = CARTESIAN_POINT('',(1.49,1.49,2.E-02));+#1332 = VECTOR('',#1333,1.);+#1333 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#1334 = PCURVE('',#122,#1335);+#1335 = DEFINITIONAL_REPRESENTATION('',(#1336),#1340);+#1336 = LINE('',#1337,#1338);+#1337 = CARTESIAN_POINT('',(-6.616929226765E-16,2.98));+#1338 = VECTOR('',#1339,1.);+#1339 = DIRECTION('',(1.,0.));+#1340 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1341 = PCURVE('',#334,#1342);+#1342 = DEFINITIONAL_REPRESENTATION('',(#1343),#1347);+#1343 = LINE('',#1344,#1345);+#1344 = CARTESIAN_POINT('',(0.,0.));+#1345 = VECTOR('',#1346,1.);+#1346 = DIRECTION('',(0.,1.));+#1347 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1348 = ORIENTED_EDGE('',*,*,#1349,.T.);+#1349 = EDGE_CURVE('',#1327,#1350,#1352,.T.);+#1350 = VERTEX_POINT('',#1351);+#1351 = CARTESIAN_POINT('',(1.225,0.375,2.E-02));+#1352 = SURFACE_CURVE('',#1353,(#1357,#1364),.PCURVE_S1.);+#1353 = LINE('',#1354,#1355);+#1354 = CARTESIAN_POINT('',(-0.1325,0.375,2.E-02));+#1355 = VECTOR('',#1356,1.);+#1356 = DIRECTION('',(-1.,3.445092848398E-16,0.));+#1357 = PCURVE('',#122,#1358);+#1358 = DEFINITIONAL_REPRESENTATION('',(#1359),#1363);+#1359 = LINE('',#1360,#1361);+#1360 = CARTESIAN_POINT('',(1.115,1.3575));+#1361 = VECTOR('',#1362,1.);+#1362 = DIRECTION('',(-1.224646799148E-16,-1.));+#1363 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1364 = PCURVE('',#1365,#1370);+#1365 = PLANE('',#1366);+#1366 = AXIS2_PLACEMENT_3D('',#1367,#1368,#1369);+#1367 = CARTESIAN_POINT('',(1.225,0.375,0.));+#1368 = DIRECTION('',(3.445092848398E-16,1.,0.));+#1369 = DIRECTION('',(1.,-3.445092848398E-16,0.));+#1370 = DEFINITIONAL_REPRESENTATION('',(#1371),#1375);+#1371 = LINE('',#1372,#1373);+#1372 = CARTESIAN_POINT('',(-1.3575,-2.E-02));+#1373 = VECTOR('',#1374,1.);+#1374 = DIRECTION('',(-1.,0.));+#1375 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1376 = ORIENTED_EDGE('',*,*,#1377,.T.);+#1377 = EDGE_CURVE('',#1350,#1378,#1380,.T.);+#1378 = VERTEX_POINT('',#1379);+#1379 = CARTESIAN_POINT('',(1.225,0.625,2.E-02));+#1380 = SURFACE_CURVE('',#1381,(#1386,#1397),.PCURVE_S1.);+#1381 = CIRCLE('',#1382,0.125);+#1382 = AXIS2_PLACEMENT_3D('',#1383,#1384,#1385);+#1383 = CARTESIAN_POINT('',(1.225,0.5,2.E-02));+#1384 = DIRECTION('',(0.,0.,-1.));+#1385 = DIRECTION('',(3.445092848398E-16,1.,0.));+#1386 = PCURVE('',#122,#1387);+#1387 = DEFINITIONAL_REPRESENTATION('',(#1388),#1396);+#1388 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1389,#1390,#1391,#1392,+#1393,#1394,#1395),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#1389 = CARTESIAN_POINT('',(0.865,2.715));+#1390 = CARTESIAN_POINT('',(0.865,2.931506350946));+#1391 = CARTESIAN_POINT('',(1.0525,2.823253175473));+#1392 = CARTESIAN_POINT('',(1.24,2.715));+#1393 = CARTESIAN_POINT('',(1.0525,2.606746824527));+#1394 = CARTESIAN_POINT('',(0.865,2.498493649054));+#1395 = CARTESIAN_POINT('',(0.865,2.715));+#1396 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1397 = PCURVE('',#1398,#1403);+#1398 = CYLINDRICAL_SURFACE('',#1399,0.125);+#1399 = AXIS2_PLACEMENT_3D('',#1400,#1401,#1402);+#1400 = CARTESIAN_POINT('',(1.225,0.5,0.));+#1401 = DIRECTION('',(0.,-0.,-1.));+#1402 = DIRECTION('',(3.445092848398E-16,1.,0.));+#1403 = DEFINITIONAL_REPRESENTATION('',(#1404),#1408);+#1404 = LINE('',#1405,#1406);+#1405 = CARTESIAN_POINT('',(-4.138911435803E-13,-2.E-02));+#1406 = VECTOR('',#1407,1.);+#1407 = DIRECTION('',(1.,-0.));+#1408 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1409 = ORIENTED_EDGE('',*,*,#1410,.T.);+#1410 = EDGE_CURVE('',#1378,#1411,#1413,.T.);+#1411 = VERTEX_POINT('',#1412);+#1412 = CARTESIAN_POINT('',(1.49,0.625,2.E-02));+#1413 = SURFACE_CURVE('',#1414,(#1418,#1425),.PCURVE_S1.);+#1414 = LINE('',#1415,#1416);+#1415 = CARTESIAN_POINT('',(5.E-03,0.625,2.E-02));+#1416 = VECTOR('',#1417,1.);+#1417 = DIRECTION('',(1.,-3.445092848398E-16,0.));+#1418 = PCURVE('',#122,#1419);+#1419 = DEFINITIONAL_REPRESENTATION('',(#1420),#1424);+#1420 = LINE('',#1421,#1422);+#1421 = CARTESIAN_POINT('',(0.865,1.495));+#1422 = VECTOR('',#1423,1.);+#1423 = DIRECTION('',(1.224646799148E-16,1.));+#1424 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1425 = PCURVE('',#1426,#1431);+#1426 = PLANE('',#1427);+#1427 = AXIS2_PLACEMENT_3D('',#1428,#1429,#1430);+#1428 = CARTESIAN_POINT('',(1.5,0.625,0.));+#1429 = DIRECTION('',(-3.445092848398E-16,-1.,0.));+#1430 = DIRECTION('',(-1.,3.445092848398E-16,0.));+#1431 = DEFINITIONAL_REPRESENTATION('',(#1432),#1436);+#1432 = LINE('',#1433,#1434);+#1433 = CARTESIAN_POINT('',(1.495,-2.E-02));+#1434 = VECTOR('',#1435,1.);+#1435 = DIRECTION('',(-1.,-0.));+#1436 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1437 = ORIENTED_EDGE('',*,*,#1438,.F.);+#1438 = EDGE_CURVE('',#1439,#1411,#1441,.T.);+#1439 = VERTEX_POINT('',#1440);+#1440 = CARTESIAN_POINT('',(1.49,0.875,2.E-02));+#1441 = SURFACE_CURVE('',#1442,(#1446,#1453),.PCURVE_S1.);+#1442 = LINE('',#1443,#1444);+#1443 = CARTESIAN_POINT('',(1.49,1.49,2.E-02));+#1444 = VECTOR('',#1445,1.);+#1445 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#1446 = PCURVE('',#122,#1447);+#1447 = DEFINITIONAL_REPRESENTATION('',(#1448),#1452);+#1448 = LINE('',#1449,#1450);+#1449 = CARTESIAN_POINT('',(-6.616929226765E-16,2.98));+#1450 = VECTOR('',#1451,1.);+#1451 = DIRECTION('',(1.,0.));+#1452 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1453 = PCURVE('',#334,#1454);+#1454 = DEFINITIONAL_REPRESENTATION('',(#1455),#1459);+#1455 = LINE('',#1456,#1457);+#1456 = CARTESIAN_POINT('',(0.,0.));+#1457 = VECTOR('',#1458,1.);+#1458 = DIRECTION('',(0.,1.));+#1459 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1460 = ORIENTED_EDGE('',*,*,#1461,.T.);+#1461 = EDGE_CURVE('',#1439,#1462,#1464,.T.);+#1462 = VERTEX_POINT('',#1463);+#1463 = CARTESIAN_POINT('',(1.225,0.875,2.E-02));+#1464 = SURFACE_CURVE('',#1465,(#1469,#1476),.PCURVE_S1.);+#1465 = LINE('',#1466,#1467);+#1466 = CARTESIAN_POINT('',(-0.1325,0.875,2.E-02));+#1467 = VECTOR('',#1468,1.);+#1468 = DIRECTION('',(-1.,3.445092848398E-16,0.));+#1469 = PCURVE('',#122,#1470);+#1470 = DEFINITIONAL_REPRESENTATION('',(#1471),#1475);+#1471 = LINE('',#1472,#1473);+#1472 = CARTESIAN_POINT('',(0.615,1.3575));+#1473 = VECTOR('',#1474,1.);+#1474 = DIRECTION('',(-1.224646799148E-16,-1.));+#1475 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1476 = PCURVE('',#1477,#1482);+#1477 = PLANE('',#1478);+#1478 = AXIS2_PLACEMENT_3D('',#1479,#1480,#1481);+#1479 = CARTESIAN_POINT('',(1.225,0.875,0.));+#1480 = DIRECTION('',(3.445092848398E-16,1.,0.));+#1481 = DIRECTION('',(1.,-3.445092848398E-16,0.));+#1482 = DEFINITIONAL_REPRESENTATION('',(#1483),#1487);+#1483 = LINE('',#1484,#1485);+#1484 = CARTESIAN_POINT('',(-1.3575,-2.E-02));+#1485 = VECTOR('',#1486,1.);+#1486 = DIRECTION('',(-1.,0.));+#1487 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1488 = ORIENTED_EDGE('',*,*,#1489,.T.);+#1489 = EDGE_CURVE('',#1462,#1490,#1492,.T.);+#1490 = VERTEX_POINT('',#1491);+#1491 = CARTESIAN_POINT('',(1.225,1.125,2.E-02));+#1492 = SURFACE_CURVE('',#1493,(#1498,#1509),.PCURVE_S1.);+#1493 = CIRCLE('',#1494,0.125);+#1494 = AXIS2_PLACEMENT_3D('',#1495,#1496,#1497);+#1495 = CARTESIAN_POINT('',(1.225,1.,2.E-02));+#1496 = DIRECTION('',(0.,0.,-1.));+#1497 = DIRECTION('',(3.445092848398E-16,1.,0.));+#1498 = PCURVE('',#122,#1499);+#1499 = DEFINITIONAL_REPRESENTATION('',(#1500),#1508);+#1500 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1501,#1502,#1503,#1504,+#1505,#1506,#1507),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#1501 = CARTESIAN_POINT('',(0.365,2.715));+#1502 = CARTESIAN_POINT('',(0.365,2.931506350946));+#1503 = CARTESIAN_POINT('',(0.5525,2.823253175473));+#1504 = CARTESIAN_POINT('',(0.74,2.715));+#1505 = CARTESIAN_POINT('',(0.5525,2.606746824527));+#1506 = CARTESIAN_POINT('',(0.365,2.498493649054));+#1507 = CARTESIAN_POINT('',(0.365,2.715));+#1508 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1509 = PCURVE('',#1510,#1515);+#1510 = CYLINDRICAL_SURFACE('',#1511,0.125);+#1511 = AXIS2_PLACEMENT_3D('',#1512,#1513,#1514);+#1512 = CARTESIAN_POINT('',(1.225,1.,0.));+#1513 = DIRECTION('',(0.,-0.,-1.));+#1514 = DIRECTION('',(3.445092848398E-16,1.,0.));+#1515 = DEFINITIONAL_REPRESENTATION('',(#1516),#1520);+#1516 = LINE('',#1517,#1518);+#1517 = CARTESIAN_POINT('',(-4.138911435803E-13,-2.E-02));+#1518 = VECTOR('',#1519,1.);+#1519 = DIRECTION('',(1.,-0.));+#1520 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1521 = ORIENTED_EDGE('',*,*,#1522,.T.);+#1522 = EDGE_CURVE('',#1490,#319,#1523,.T.);+#1523 = SURFACE_CURVE('',#1524,(#1528,#1535),.PCURVE_S1.);+#1524 = LINE('',#1525,#1526);+#1525 = CARTESIAN_POINT('',(5.E-03,1.125,2.E-02));+#1526 = VECTOR('',#1527,1.);+#1527 = DIRECTION('',(1.,-3.445092848398E-16,0.));+#1528 = PCURVE('',#122,#1529);+#1529 = DEFINITIONAL_REPRESENTATION('',(#1530),#1534);+#1530 = LINE('',#1531,#1532);+#1531 = CARTESIAN_POINT('',(0.365,1.495));+#1532 = VECTOR('',#1533,1.);+#1533 = DIRECTION('',(1.224646799148E-16,1.));+#1534 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1535 = PCURVE('',#1536,#1541);+#1536 = PLANE('',#1537);+#1537 = AXIS2_PLACEMENT_3D('',#1538,#1539,#1540);+#1538 = CARTESIAN_POINT('',(1.5,1.125,0.));+#1539 = DIRECTION('',(-3.445092848398E-16,-1.,0.));+#1540 = DIRECTION('',(-1.,3.445092848398E-16,0.));+#1541 = DEFINITIONAL_REPRESENTATION('',(#1542),#1546);+#1542 = LINE('',#1543,#1544);+#1543 = CARTESIAN_POINT('',(1.495,-2.E-02));+#1544 = VECTOR('',#1545,1.);+#1545 = DIRECTION('',(-1.,-0.));+#1546 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1547 = FACE_BOUND('',#1548,.F.);+#1548 = EDGE_LOOP('',(#1549,#1572,#1573,#1574,#1597));+#1549 = ORIENTED_EDGE('',*,*,#1550,.T.);+#1550 = EDGE_CURVE('',#1551,#107,#1553,.T.);+#1551 = VERTEX_POINT('',#1552);+#1552 = CARTESIAN_POINT('',(0.6,-1.,2.E-02));+#1553 = SURFACE_CURVE('',#1554,(#1558,#1565),.PCURVE_S1.);+#1554 = LINE('',#1555,#1556);+#1555 = CARTESIAN_POINT('',(-1.045,-1.,2.E-02));+#1556 = VECTOR('',#1557,1.);+#1557 = DIRECTION('',(-1.,2.22044604925E-16,0.));+#1558 = PCURVE('',#122,#1559);+#1559 = DEFINITIONAL_REPRESENTATION('',(#1560),#1564);+#1560 = LINE('',#1561,#1562);+#1561 = CARTESIAN_POINT('',(2.49,0.445));+#1562 = VECTOR('',#1563,1.);+#1563 = DIRECTION('',(0.,-1.));+#1564 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1565 = PCURVE('',#148,#1566);+#1566 = DEFINITIONAL_REPRESENTATION('',(#1567),#1571);+#1567 = LINE('',#1568,#1569);+#1568 = CARTESIAN_POINT('',(-0.445,-2.E-02));+#1569 = VECTOR('',#1570,1.);+#1570 = DIRECTION('',(-1.,0.));+#1571 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1572 = ORIENTED_EDGE('',*,*,#106,.T.);+#1573 = ORIENTED_EDGE('',*,*,#291,.T.);+#1574 = ORIENTED_EDGE('',*,*,#1575,.T.);+#1575 = EDGE_CURVE('',#269,#1576,#1578,.T.);+#1576 = VERTEX_POINT('',#1577);+#1577 = CARTESIAN_POINT('',(0.6,1.,2.E-02));+#1578 = SURFACE_CURVE('',#1579,(#1583,#1590),.PCURVE_S1.);+#1579 = LINE('',#1580,#1581);+#1580 = CARTESIAN_POINT('',(-0.445,1.,2.E-02));+#1581 = VECTOR('',#1582,1.);+#1582 = DIRECTION('',(1.,-2.22044604925E-16,0.));+#1583 = PCURVE('',#122,#1584);+#1584 = DEFINITIONAL_REPRESENTATION('',(#1585),#1589);+#1585 = LINE('',#1586,#1587);+#1586 = CARTESIAN_POINT('',(0.49,1.045));+#1587 = VECTOR('',#1588,1.);+#1588 = DIRECTION('',(0.,1.));+#1589 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1590 = PCURVE('',#231,#1591);+#1591 = DEFINITIONAL_REPRESENTATION('',(#1592),#1596);+#1592 = LINE('',#1593,#1594);+#1593 = CARTESIAN_POINT('',(1.045,-2.E-02));+#1594 = VECTOR('',#1595,1.);+#1595 = DIRECTION('',(-1.,-0.));+#1596 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1597 = ORIENTED_EDGE('',*,*,#1598,.T.);+#1598 = EDGE_CURVE('',#1576,#1551,#1599,.T.);+#1599 = SURFACE_CURVE('',#1600,(#1604,#1611),.PCURVE_S1.);+#1600 = LINE('',#1601,#1602);+#1601 = CARTESIAN_POINT('',(0.6,0.245,2.E-02));+#1602 = VECTOR('',#1603,1.);+#1603 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#1604 = PCURVE('',#122,#1605);+#1605 = DEFINITIONAL_REPRESENTATION('',(#1606),#1610);+#1606 = LINE('',#1607,#1608);+#1607 = CARTESIAN_POINT('',(1.245,2.09));+#1608 = VECTOR('',#1609,1.);+#1609 = DIRECTION('',(1.,0.));+#1610 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1611 = PCURVE('',#203,#1612);+#1612 = DEFINITIONAL_REPRESENTATION('',(#1613),#1617);+#1613 = LINE('',#1614,#1615);+#1614 = CARTESIAN_POINT('',(1.245,-2.E-02));+#1615 = VECTOR('',#1616,1.);+#1616 = DIRECTION('',(-1.,-0.));+#1617 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1618 = ADVANCED_FACE('',(#1619),#148,.F.);+#1619 = FACE_BOUND('',#1620,.F.);+#1620 = EDGE_LOOP('',(#1621,#1622,#1623,#1624));+#1621 = ORIENTED_EDGE('',*,*,#164,.F.);+#1622 = ORIENTED_EDGE('',*,*,#134,.T.);+#1623 = ORIENTED_EDGE('',*,*,#1550,.F.);+#1624 = ORIENTED_EDGE('',*,*,#1625,.F.);+#1625 = EDGE_CURVE('',#165,#1551,#1626,.T.);+#1626 = SURFACE_CURVE('',#1627,(#1631,#1638),.PCURVE_S1.);+#1627 = LINE('',#1628,#1629);+#1628 = CARTESIAN_POINT('',(0.6,-1.,0.));+#1629 = VECTOR('',#1630,1.);+#1630 = DIRECTION('',(0.,0.,1.));+#1631 = PCURVE('',#148,#1632);+#1632 = DEFINITIONAL_REPRESENTATION('',(#1633),#1637);+#1633 = LINE('',#1634,#1635);+#1634 = CARTESIAN_POINT('',(1.2,0.));+#1635 = VECTOR('',#1636,1.);+#1636 = DIRECTION('',(0.,-1.));+#1637 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1638 = PCURVE('',#203,#1639);+#1639 = DEFINITIONAL_REPRESENTATION('',(#1640),#1644);+#1640 = LINE('',#1641,#1642);+#1641 = CARTESIAN_POINT('',(0.,0.));+#1642 = VECTOR('',#1643,1.);+#1643 = DIRECTION('',(0.,-1.));+#1644 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1645 = ADVANCED_FACE('',(#1646),#203,.F.);+#1646 = FACE_BOUND('',#1647,.F.);+#1647 = EDGE_LOOP('',(#1648,#1649,#1650,#1651));+#1648 = ORIENTED_EDGE('',*,*,#187,.F.);+#1649 = ORIENTED_EDGE('',*,*,#1625,.T.);+#1650 = ORIENTED_EDGE('',*,*,#1598,.F.);+#1651 = ORIENTED_EDGE('',*,*,#1652,.F.);+#1652 = EDGE_CURVE('',#188,#1576,#1653,.T.);+#1653 = SURFACE_CURVE('',#1654,(#1658,#1665),.PCURVE_S1.);+#1654 = LINE('',#1655,#1656);+#1655 = CARTESIAN_POINT('',(0.6,1.,0.));+#1656 = VECTOR('',#1657,1.);+#1657 = DIRECTION('',(0.,0.,1.));+#1658 = PCURVE('',#203,#1659);+#1659 = DEFINITIONAL_REPRESENTATION('',(#1660),#1664);+#1660 = LINE('',#1661,#1662);+#1661 = CARTESIAN_POINT('',(2.,0.));+#1662 = VECTOR('',#1663,1.);+#1663 = DIRECTION('',(0.,-1.));+#1664 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1665 = PCURVE('',#231,#1666);+#1666 = DEFINITIONAL_REPRESENTATION('',(#1667),#1671);+#1667 = LINE('',#1668,#1669);+#1668 = CARTESIAN_POINT('',(0.,0.));+#1669 = VECTOR('',#1670,1.);+#1670 = DIRECTION('',(0.,-1.));+#1671 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1672 = ADVANCED_FACE('',(#1673),#231,.F.);+#1673 = FACE_BOUND('',#1674,.F.);+#1674 = EDGE_LOOP('',(#1675,#1676,#1677,#1678));+#1675 = ORIENTED_EDGE('',*,*,#215,.F.);+#1676 = ORIENTED_EDGE('',*,*,#1652,.T.);+#1677 = ORIENTED_EDGE('',*,*,#1575,.F.);+#1678 = ORIENTED_EDGE('',*,*,#268,.F.);+#1679 = ADVANCED_FACE('',(#1680),#334,.T.);+#1680 = FACE_BOUND('',#1681,.T.);+#1681 = EDGE_LOOP('',(#1682,#1683,#1706,#1734,#1755,#1756,#1779,#1807,+ #1828,#1829,#1852,#1880,#1901,#1902,#1925,#1953,#1974,#1975,#1998,+ #2026,#2047,#2048,#2071,#2099));+#1682 = ORIENTED_EDGE('',*,*,#316,.F.);+#1683 = ORIENTED_EDGE('',*,*,#1684,.T.);+#1684 = EDGE_CURVE('',#317,#1685,#1687,.T.);+#1685 = VERTEX_POINT('',#1686);+#1686 = CARTESIAN_POINT('',(1.49,1.49,1.02));+#1687 = SURFACE_CURVE('',#1688,(#1692,#1699),.PCURVE_S1.);+#1688 = LINE('',#1689,#1690);+#1689 = CARTESIAN_POINT('',(1.49,1.49,2.E-02));+#1690 = VECTOR('',#1691,1.);+#1691 = DIRECTION('',(0.,0.,1.));+#1692 = PCURVE('',#334,#1693);+#1693 = DEFINITIONAL_REPRESENTATION('',(#1694),#1698);+#1694 = LINE('',#1695,#1696);+#1695 = CARTESIAN_POINT('',(0.,0.));+#1696 = VECTOR('',#1697,1.);+#1697 = DIRECTION('',(1.,0.));+#1698 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1699 = PCURVE('',#362,#1700);+#1700 = DEFINITIONAL_REPRESENTATION('',(#1701),#1705);+#1701 = LINE('',#1702,#1703);+#1702 = CARTESIAN_POINT('',(0.,-2.98));+#1703 = VECTOR('',#1704,1.);+#1704 = DIRECTION('',(1.,0.));+#1705 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1706 = ORIENTED_EDGE('',*,*,#1707,.T.);+#1707 = EDGE_CURVE('',#1685,#1708,#1710,.T.);+#1708 = VERTEX_POINT('',#1709);+#1709 = CARTESIAN_POINT('',(1.49,-1.49,1.02));+#1710 = SURFACE_CURVE('',#1711,(#1715,#1722),.PCURVE_S1.);+#1711 = LINE('',#1712,#1713);+#1712 = CARTESIAN_POINT('',(1.49,1.49,1.02));+#1713 = VECTOR('',#1714,1.);+#1714 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#1715 = PCURVE('',#334,#1716);+#1716 = DEFINITIONAL_REPRESENTATION('',(#1717),#1721);+#1717 = LINE('',#1718,#1719);+#1718 = CARTESIAN_POINT('',(1.,0.));+#1719 = VECTOR('',#1720,1.);+#1720 = DIRECTION('',(0.,1.));+#1721 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1722 = PCURVE('',#1723,#1728);+#1723 = PLANE('',#1724);+#1724 = AXIS2_PLACEMENT_3D('',#1725,#1726,#1727);+#1725 = CARTESIAN_POINT('',(-1.49,1.49,1.02));+#1726 = DIRECTION('',(0.,0.,1.));+#1727 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#1728 = DEFINITIONAL_REPRESENTATION('',(#1729),#1733);+#1729 = LINE('',#1730,#1731);+#1730 = CARTESIAN_POINT('',(-6.616929226765E-16,2.98));+#1731 = VECTOR('',#1732,1.);+#1732 = DIRECTION('',(1.,0.));+#1733 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1734 = ORIENTED_EDGE('',*,*,#1735,.F.);+#1735 = EDGE_CURVE('',#963,#1708,#1736,.T.);+#1736 = SURFACE_CURVE('',#1737,(#1741,#1748),.PCURVE_S1.);+#1737 = LINE('',#1738,#1739);+#1738 = CARTESIAN_POINT('',(1.49,-1.49,2.E-02));+#1739 = VECTOR('',#1740,1.);+#1740 = DIRECTION('',(0.,0.,1.));+#1741 = PCURVE('',#334,#1742);+#1742 = DEFINITIONAL_REPRESENTATION('',(#1743),#1747);+#1743 = LINE('',#1744,#1745);+#1744 = CARTESIAN_POINT('',(0.,2.98));+#1745 = VECTOR('',#1746,1.);+#1746 = DIRECTION('',(1.,0.));+#1747 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1748 = PCURVE('',#978,#1749);+#1749 = DEFINITIONAL_REPRESENTATION('',(#1750),#1754);+#1750 = LINE('',#1751,#1752);+#1751 = CARTESIAN_POINT('',(0.,-2.98));+#1752 = VECTOR('',#1753,1.);+#1753 = DIRECTION('',(1.,0.));+#1754 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1755 = ORIENTED_EDGE('',*,*,#990,.F.);+#1756 = ORIENTED_EDGE('',*,*,#1757,.T.);+#1757 = EDGE_CURVE('',#991,#1758,#1760,.T.);+#1758 = VERTEX_POINT('',#1759);+#1759 = CARTESIAN_POINT('',(1.49,-1.125,0.2));+#1760 = SURFACE_CURVE('',#1761,(#1765,#1772),.PCURVE_S1.);+#1761 = LINE('',#1762,#1763);+#1762 = CARTESIAN_POINT('',(1.49,-1.125,1.E-02));+#1763 = VECTOR('',#1764,1.);+#1764 = DIRECTION('',(0.,0.,1.));+#1765 = PCURVE('',#334,#1766);+#1766 = DEFINITIONAL_REPRESENTATION('',(#1767),#1771);+#1767 = LINE('',#1768,#1769);+#1768 = CARTESIAN_POINT('',(-1.E-02,2.615));+#1769 = VECTOR('',#1770,1.);+#1770 = DIRECTION('',(1.,0.));+#1771 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1772 = PCURVE('',#1029,#1773);+#1773 = DEFINITIONAL_REPRESENTATION('',(#1774),#1778);+#1774 = LINE('',#1775,#1776);+#1775 = CARTESIAN_POINT('',(0.265,-1.E-02));+#1776 = VECTOR('',#1777,1.);+#1777 = DIRECTION('',(0.,-1.));+#1778 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1779 = ORIENTED_EDGE('',*,*,#1780,.F.);+#1780 = EDGE_CURVE('',#1781,#1758,#1783,.T.);+#1781 = VERTEX_POINT('',#1782);+#1782 = CARTESIAN_POINT('',(1.49,-0.875,0.2));+#1783 = SURFACE_CURVE('',#1784,(#1788,#1795),.PCURVE_S1.);+#1784 = LINE('',#1785,#1786);+#1785 = CARTESIAN_POINT('',(1.49,0.245,0.2));+#1786 = VECTOR('',#1787,1.);+#1787 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#1788 = PCURVE('',#334,#1789);+#1789 = DEFINITIONAL_REPRESENTATION('',(#1790),#1794);+#1790 = LINE('',#1791,#1792);+#1791 = CARTESIAN_POINT('',(0.18,1.245));+#1792 = VECTOR('',#1793,1.);+#1793 = DIRECTION('',(0.,1.));+#1794 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1795 = PCURVE('',#1796,#1801);+#1796 = PLANE('',#1797);+#1797 = AXIS2_PLACEMENT_3D('',#1798,#1799,#1800);+#1798 = CARTESIAN_POINT('',(1.324839749899,-1.,0.2));+#1799 = DIRECTION('',(0.,0.,1.));+#1800 = DIRECTION('',(3.445092848398E-16,1.,-0.));+#1801 = DEFINITIONAL_REPRESENTATION('',(#1802),#1806);+#1802 = LINE('',#1803,#1804);+#1803 = CARTESIAN_POINT('',(1.245,-0.165160250101));+#1804 = VECTOR('',#1805,1.);+#1805 = DIRECTION('',(-1.,-1.224646799148E-16));+#1806 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1807 = ORIENTED_EDGE('',*,*,#1808,.T.);+#1808 = EDGE_CURVE('',#1781,#1075,#1809,.T.);+#1809 = SURFACE_CURVE('',#1810,(#1814,#1821),.PCURVE_S1.);+#1810 = LINE('',#1811,#1812);+#1811 = CARTESIAN_POINT('',(1.49,-0.875,1.E-02));+#1812 = VECTOR('',#1813,1.);+#1813 = DIRECTION('',(0.,-0.,-1.));+#1814 = PCURVE('',#334,#1815);+#1815 = DEFINITIONAL_REPRESENTATION('',(#1816),#1820);+#1816 = LINE('',#1817,#1818);+#1817 = CARTESIAN_POINT('',(-1.E-02,2.365));+#1818 = VECTOR('',#1819,1.);+#1819 = DIRECTION('',(-1.,-0.));+#1820 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1821 = PCURVE('',#1090,#1822);+#1822 = DEFINITIONAL_REPRESENTATION('',(#1823),#1827);+#1823 = LINE('',#1824,#1825);+#1824 = CARTESIAN_POINT('',(1.E-02,-1.E-02));+#1825 = VECTOR('',#1826,1.);+#1826 = DIRECTION('',(0.,1.));+#1827 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1828 = ORIENTED_EDGE('',*,*,#1102,.F.);+#1829 = ORIENTED_EDGE('',*,*,#1830,.T.);+#1830 = EDGE_CURVE('',#1103,#1831,#1833,.T.);+#1831 = VERTEX_POINT('',#1832);+#1832 = CARTESIAN_POINT('',(1.49,-0.625,0.2));+#1833 = SURFACE_CURVE('',#1834,(#1838,#1845),.PCURVE_S1.);+#1834 = LINE('',#1835,#1836);+#1835 = CARTESIAN_POINT('',(1.49,-0.625,1.E-02));+#1836 = VECTOR('',#1837,1.);+#1837 = DIRECTION('',(0.,0.,1.));+#1838 = PCURVE('',#334,#1839);+#1839 = DEFINITIONAL_REPRESENTATION('',(#1840),#1844);+#1840 = LINE('',#1841,#1842);+#1841 = CARTESIAN_POINT('',(-1.E-02,2.115));+#1842 = VECTOR('',#1843,1.);+#1843 = DIRECTION('',(1.,0.));+#1844 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1845 = PCURVE('',#1141,#1846);+#1846 = DEFINITIONAL_REPRESENTATION('',(#1847),#1851);+#1847 = LINE('',#1848,#1849);+#1848 = CARTESIAN_POINT('',(0.265,-1.E-02));+#1849 = VECTOR('',#1850,1.);+#1850 = DIRECTION('',(0.,-1.));+#1851 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1852 = ORIENTED_EDGE('',*,*,#1853,.F.);+#1853 = EDGE_CURVE('',#1854,#1831,#1856,.T.);+#1854 = VERTEX_POINT('',#1855);+#1855 = CARTESIAN_POINT('',(1.49,-0.375,0.2));+#1856 = SURFACE_CURVE('',#1857,(#1861,#1868),.PCURVE_S1.);+#1857 = LINE('',#1858,#1859);+#1858 = CARTESIAN_POINT('',(1.49,0.495,0.2));+#1859 = VECTOR('',#1860,1.);+#1860 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#1861 = PCURVE('',#334,#1862);+#1862 = DEFINITIONAL_REPRESENTATION('',(#1863),#1867);+#1863 = LINE('',#1864,#1865);+#1864 = CARTESIAN_POINT('',(0.18,0.995));+#1865 = VECTOR('',#1866,1.);+#1866 = DIRECTION('',(0.,1.));+#1867 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1868 = PCURVE('',#1869,#1874);+#1869 = PLANE('',#1870);+#1870 = AXIS2_PLACEMENT_3D('',#1871,#1872,#1873);+#1871 = CARTESIAN_POINT('',(1.324839749899,-0.5,0.2));+#1872 = DIRECTION('',(0.,0.,1.));+#1873 = DIRECTION('',(3.445092848398E-16,1.,-0.));+#1874 = DEFINITIONAL_REPRESENTATION('',(#1875),#1879);+#1875 = LINE('',#1876,#1877);+#1876 = CARTESIAN_POINT('',(0.995,-0.165160250101));+#1877 = VECTOR('',#1878,1.);+#1878 = DIRECTION('',(-1.,-1.224646799148E-16));+#1879 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1880 = ORIENTED_EDGE('',*,*,#1881,.T.);+#1881 = EDGE_CURVE('',#1854,#1187,#1882,.T.);+#1882 = SURFACE_CURVE('',#1883,(#1887,#1894),.PCURVE_S1.);+#1883 = LINE('',#1884,#1885);+#1884 = CARTESIAN_POINT('',(1.49,-0.375,1.E-02));+#1885 = VECTOR('',#1886,1.);+#1886 = DIRECTION('',(0.,-0.,-1.));+#1887 = PCURVE('',#334,#1888);+#1888 = DEFINITIONAL_REPRESENTATION('',(#1889),#1893);+#1889 = LINE('',#1890,#1891);+#1890 = CARTESIAN_POINT('',(-1.E-02,1.865));+#1891 = VECTOR('',#1892,1.);+#1892 = DIRECTION('',(-1.,-0.));+#1893 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1894 = PCURVE('',#1202,#1895);+#1895 = DEFINITIONAL_REPRESENTATION('',(#1896),#1900);+#1896 = LINE('',#1897,#1898);+#1897 = CARTESIAN_POINT('',(1.E-02,-1.E-02));+#1898 = VECTOR('',#1899,1.);+#1899 = DIRECTION('',(0.,1.));+#1900 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1901 = ORIENTED_EDGE('',*,*,#1214,.F.);+#1902 = ORIENTED_EDGE('',*,*,#1903,.T.);+#1903 = EDGE_CURVE('',#1215,#1904,#1906,.T.);+#1904 = VERTEX_POINT('',#1905);+#1905 = CARTESIAN_POINT('',(1.49,-0.125,0.2));+#1906 = SURFACE_CURVE('',#1907,(#1911,#1918),.PCURVE_S1.);+#1907 = LINE('',#1908,#1909);+#1908 = CARTESIAN_POINT('',(1.49,-0.125,1.E-02));+#1909 = VECTOR('',#1910,1.);+#1910 = DIRECTION('',(0.,0.,1.));+#1911 = PCURVE('',#334,#1912);+#1912 = DEFINITIONAL_REPRESENTATION('',(#1913),#1917);+#1913 = LINE('',#1914,#1915);+#1914 = CARTESIAN_POINT('',(-1.E-02,1.615));+#1915 = VECTOR('',#1916,1.);+#1916 = DIRECTION('',(1.,0.));+#1917 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1918 = PCURVE('',#1253,#1919);+#1919 = DEFINITIONAL_REPRESENTATION('',(#1920),#1924);+#1920 = LINE('',#1921,#1922);+#1921 = CARTESIAN_POINT('',(0.265,-1.E-02));+#1922 = VECTOR('',#1923,1.);+#1923 = DIRECTION('',(0.,-1.));+#1924 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1925 = ORIENTED_EDGE('',*,*,#1926,.F.);+#1926 = EDGE_CURVE('',#1927,#1904,#1929,.T.);+#1927 = VERTEX_POINT('',#1928);+#1928 = CARTESIAN_POINT('',(1.49,0.125,0.2));+#1929 = SURFACE_CURVE('',#1930,(#1934,#1941),.PCURVE_S1.);+#1930 = LINE('',#1931,#1932);+#1931 = CARTESIAN_POINT('',(1.49,0.745,0.2));+#1932 = VECTOR('',#1933,1.);+#1933 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#1934 = PCURVE('',#334,#1935);+#1935 = DEFINITIONAL_REPRESENTATION('',(#1936),#1940);+#1936 = LINE('',#1937,#1938);+#1937 = CARTESIAN_POINT('',(0.18,0.745));+#1938 = VECTOR('',#1939,1.);+#1939 = DIRECTION('',(0.,1.));+#1940 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1941 = PCURVE('',#1942,#1947);+#1942 = PLANE('',#1943);+#1943 = AXIS2_PLACEMENT_3D('',#1944,#1945,#1946);+#1944 = CARTESIAN_POINT('',(1.324839749899,-3.053113317719E-16,0.2));+#1945 = DIRECTION('',(0.,0.,1.));+#1946 = DIRECTION('',(3.445092848398E-16,1.,-0.));+#1947 = DEFINITIONAL_REPRESENTATION('',(#1948),#1952);+#1948 = LINE('',#1949,#1950);+#1949 = CARTESIAN_POINT('',(0.745,-0.165160250101));+#1950 = VECTOR('',#1951,1.);+#1951 = DIRECTION('',(-1.,-1.224646799148E-16));+#1952 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1953 = ORIENTED_EDGE('',*,*,#1954,.T.);+#1954 = EDGE_CURVE('',#1927,#1299,#1955,.T.);+#1955 = SURFACE_CURVE('',#1956,(#1960,#1967),.PCURVE_S1.);+#1956 = LINE('',#1957,#1958);+#1957 = CARTESIAN_POINT('',(1.49,0.125,1.E-02));+#1958 = VECTOR('',#1959,1.);+#1959 = DIRECTION('',(0.,-0.,-1.));+#1960 = PCURVE('',#334,#1961);+#1961 = DEFINITIONAL_REPRESENTATION('',(#1962),#1966);+#1962 = LINE('',#1963,#1964);+#1963 = CARTESIAN_POINT('',(-1.E-02,1.365));+#1964 = VECTOR('',#1965,1.);+#1965 = DIRECTION('',(-1.,-0.));+#1966 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1967 = PCURVE('',#1314,#1968);+#1968 = DEFINITIONAL_REPRESENTATION('',(#1969),#1973);+#1969 = LINE('',#1970,#1971);+#1970 = CARTESIAN_POINT('',(1.E-02,-1.E-02));+#1971 = VECTOR('',#1972,1.);+#1972 = DIRECTION('',(0.,1.));+#1973 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1974 = ORIENTED_EDGE('',*,*,#1326,.F.);+#1975 = ORIENTED_EDGE('',*,*,#1976,.T.);+#1976 = EDGE_CURVE('',#1327,#1977,#1979,.T.);+#1977 = VERTEX_POINT('',#1978);+#1978 = CARTESIAN_POINT('',(1.49,0.375,0.2));+#1979 = SURFACE_CURVE('',#1980,(#1984,#1991),.PCURVE_S1.);+#1980 = LINE('',#1981,#1982);+#1981 = CARTESIAN_POINT('',(1.49,0.375,1.E-02));+#1982 = VECTOR('',#1983,1.);+#1983 = DIRECTION('',(0.,0.,1.));+#1984 = PCURVE('',#334,#1985);+#1985 = DEFINITIONAL_REPRESENTATION('',(#1986),#1990);+#1986 = LINE('',#1987,#1988);+#1987 = CARTESIAN_POINT('',(-1.E-02,1.115));+#1988 = VECTOR('',#1989,1.);+#1989 = DIRECTION('',(1.,0.));+#1990 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1991 = PCURVE('',#1365,#1992);+#1992 = DEFINITIONAL_REPRESENTATION('',(#1993),#1997);+#1993 = LINE('',#1994,#1995);+#1994 = CARTESIAN_POINT('',(0.265,-1.E-02));+#1995 = VECTOR('',#1996,1.);+#1996 = DIRECTION('',(0.,-1.));+#1997 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1998 = ORIENTED_EDGE('',*,*,#1999,.F.);+#1999 = EDGE_CURVE('',#2000,#1977,#2002,.T.);+#2000 = VERTEX_POINT('',#2001);+#2001 = CARTESIAN_POINT('',(1.49,0.625,0.2));+#2002 = SURFACE_CURVE('',#2003,(#2007,#2014),.PCURVE_S1.);+#2003 = LINE('',#2004,#2005);+#2004 = CARTESIAN_POINT('',(1.49,0.995,0.2));+#2005 = VECTOR('',#2006,1.);+#2006 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#2007 = PCURVE('',#334,#2008);+#2008 = DEFINITIONAL_REPRESENTATION('',(#2009),#2013);+#2009 = LINE('',#2010,#2011);+#2010 = CARTESIAN_POINT('',(0.18,0.495));+#2011 = VECTOR('',#2012,1.);+#2012 = DIRECTION('',(0.,1.));+#2013 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2014 = PCURVE('',#2015,#2020);+#2015 = PLANE('',#2016);+#2016 = AXIS2_PLACEMENT_3D('',#2017,#2018,#2019);+#2017 = CARTESIAN_POINT('',(1.324839749899,0.5,0.2));+#2018 = DIRECTION('',(0.,0.,1.));+#2019 = DIRECTION('',(3.445092848398E-16,1.,-0.));+#2020 = DEFINITIONAL_REPRESENTATION('',(#2021),#2025);+#2021 = LINE('',#2022,#2023);+#2022 = CARTESIAN_POINT('',(0.495,-0.165160250101));+#2023 = VECTOR('',#2024,1.);+#2024 = DIRECTION('',(-1.,-1.224646799148E-16));+#2025 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2026 = ORIENTED_EDGE('',*,*,#2027,.T.);+#2027 = EDGE_CURVE('',#2000,#1411,#2028,.T.);+#2028 = SURFACE_CURVE('',#2029,(#2033,#2040),.PCURVE_S1.);+#2029 = LINE('',#2030,#2031);+#2030 = CARTESIAN_POINT('',(1.49,0.625,1.E-02));+#2031 = VECTOR('',#2032,1.);+#2032 = DIRECTION('',(0.,-0.,-1.));+#2033 = PCURVE('',#334,#2034);+#2034 = DEFINITIONAL_REPRESENTATION('',(#2035),#2039);+#2035 = LINE('',#2036,#2037);+#2036 = CARTESIAN_POINT('',(-1.E-02,0.865));+#2037 = VECTOR('',#2038,1.);+#2038 = DIRECTION('',(-1.,-0.));+#2039 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2040 = PCURVE('',#1426,#2041);+#2041 = DEFINITIONAL_REPRESENTATION('',(#2042),#2046);+#2042 = LINE('',#2043,#2044);+#2043 = CARTESIAN_POINT('',(1.E-02,-1.E-02));+#2044 = VECTOR('',#2045,1.);+#2045 = DIRECTION('',(0.,1.));+#2046 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2047 = ORIENTED_EDGE('',*,*,#1438,.F.);+#2048 = ORIENTED_EDGE('',*,*,#2049,.T.);+#2049 = EDGE_CURVE('',#1439,#2050,#2052,.T.);+#2050 = VERTEX_POINT('',#2051);+#2051 = CARTESIAN_POINT('',(1.49,0.875,0.2));+#2052 = SURFACE_CURVE('',#2053,(#2057,#2064),.PCURVE_S1.);+#2053 = LINE('',#2054,#2055);+#2054 = CARTESIAN_POINT('',(1.49,0.875,1.E-02));+#2055 = VECTOR('',#2056,1.);+#2056 = DIRECTION('',(0.,0.,1.));+#2057 = PCURVE('',#334,#2058);+#2058 = DEFINITIONAL_REPRESENTATION('',(#2059),#2063);+#2059 = LINE('',#2060,#2061);+#2060 = CARTESIAN_POINT('',(-1.E-02,0.615));+#2061 = VECTOR('',#2062,1.);+#2062 = DIRECTION('',(1.,0.));+#2063 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2064 = PCURVE('',#1477,#2065);+#2065 = DEFINITIONAL_REPRESENTATION('',(#2066),#2070);+#2066 = LINE('',#2067,#2068);+#2067 = CARTESIAN_POINT('',(0.265,-1.E-02));+#2068 = VECTOR('',#2069,1.);+#2069 = DIRECTION('',(0.,-1.));+#2070 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2071 = ORIENTED_EDGE('',*,*,#2072,.F.);+#2072 = EDGE_CURVE('',#2073,#2050,#2075,.T.);+#2073 = VERTEX_POINT('',#2074);+#2074 = CARTESIAN_POINT('',(1.49,1.125,0.2));+#2075 = SURFACE_CURVE('',#2076,(#2080,#2087),.PCURVE_S1.);+#2076 = LINE('',#2077,#2078);+#2077 = CARTESIAN_POINT('',(1.49,1.245,0.2));+#2078 = VECTOR('',#2079,1.);+#2079 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#2080 = PCURVE('',#334,#2081);+#2081 = DEFINITIONAL_REPRESENTATION('',(#2082),#2086);+#2082 = LINE('',#2083,#2084);+#2083 = CARTESIAN_POINT('',(0.18,0.245));+#2084 = VECTOR('',#2085,1.);+#2085 = DIRECTION('',(0.,1.));+#2086 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2087 = PCURVE('',#2088,#2093);+#2088 = PLANE('',#2089);+#2089 = AXIS2_PLACEMENT_3D('',#2090,#2091,#2092);+#2090 = CARTESIAN_POINT('',(1.324839749899,1.,0.2));+#2091 = DIRECTION('',(0.,0.,1.));+#2092 = DIRECTION('',(3.445092848398E-16,1.,-0.));+#2093 = DEFINITIONAL_REPRESENTATION('',(#2094),#2098);+#2094 = LINE('',#2095,#2096);+#2095 = CARTESIAN_POINT('',(0.245,-0.165160250101));+#2096 = VECTOR('',#2097,1.);+#2097 = DIRECTION('',(-1.,-1.224646799148E-16));+#2098 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2099 = ORIENTED_EDGE('',*,*,#2100,.T.);+#2100 = EDGE_CURVE('',#2073,#319,#2101,.T.);+#2101 = SURFACE_CURVE('',#2102,(#2106,#2113),.PCURVE_S1.);+#2102 = LINE('',#2103,#2104);+#2103 = CARTESIAN_POINT('',(1.49,1.125,1.E-02));+#2104 = VECTOR('',#2105,1.);+#2105 = DIRECTION('',(0.,-0.,-1.));+#2106 = PCURVE('',#334,#2107);+#2107 = DEFINITIONAL_REPRESENTATION('',(#2108),#2112);+#2108 = LINE('',#2109,#2110);+#2109 = CARTESIAN_POINT('',(-1.E-02,0.365));+#2110 = VECTOR('',#2111,1.);+#2111 = DIRECTION('',(-1.,-0.));+#2112 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2113 = PCURVE('',#1536,#2114);+#2114 = DEFINITIONAL_REPRESENTATION('',(#2115),#2119);+#2115 = LINE('',#2116,#2117);+#2116 = CARTESIAN_POINT('',(1.E-02,-1.E-02));+#2117 = VECTOR('',#2118,1.);+#2118 = DIRECTION('',(0.,1.));+#2119 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2120 = ADVANCED_FACE('',(#2121),#362,.F.);+#2121 = FACE_BOUND('',#2122,.F.);+#2122 = EDGE_LOOP('',(#2123,#2146,#2147,#2148));+#2123 = ORIENTED_EDGE('',*,*,#2124,.F.);+#2124 = EDGE_CURVE('',#347,#2125,#2127,.T.);+#2125 = VERTEX_POINT('',#2126);+#2126 = CARTESIAN_POINT('',(-1.49,1.49,1.02));+#2127 = SURFACE_CURVE('',#2128,(#2132,#2139),.PCURVE_S1.);+#2128 = LINE('',#2129,#2130);+#2129 = CARTESIAN_POINT('',(-1.49,1.49,2.E-02));+#2130 = VECTOR('',#2131,1.);+#2131 = DIRECTION('',(0.,0.,1.));+#2132 = PCURVE('',#362,#2133);+#2133 = DEFINITIONAL_REPRESENTATION('',(#2134),#2138);+#2134 = LINE('',#2135,#2136);+#2135 = CARTESIAN_POINT('',(0.,0.));+#2136 = VECTOR('',#2137,1.);+#2137 = DIRECTION('',(1.,0.));+#2138 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2139 = PCURVE('',#390,#2140);+#2140 = DEFINITIONAL_REPRESENTATION('',(#2141),#2145);+#2141 = LINE('',#2142,#2143);+#2142 = CARTESIAN_POINT('',(0.,0.));+#2143 = VECTOR('',#2144,1.);+#2144 = DIRECTION('',(1.,0.));+#2145 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2146 = ORIENTED_EDGE('',*,*,#346,.T.);+#2147 = ORIENTED_EDGE('',*,*,#1684,.T.);+#2148 = ORIENTED_EDGE('',*,*,#2149,.F.);+#2149 = EDGE_CURVE('',#2125,#1685,#2150,.T.);+#2150 = SURFACE_CURVE('',#2151,(#2155,#2162),.PCURVE_S1.);+#2151 = LINE('',#2152,#2153);+#2152 = CARTESIAN_POINT('',(-1.49,1.49,1.02));+#2153 = VECTOR('',#2154,1.);+#2154 = DIRECTION('',(1.,-2.22044604925E-16,0.));+#2155 = PCURVE('',#362,#2156);+#2156 = DEFINITIONAL_REPRESENTATION('',(#2157),#2161);+#2157 = LINE('',#2158,#2159);+#2158 = CARTESIAN_POINT('',(1.,0.));+#2159 = VECTOR('',#2160,1.);+#2160 = DIRECTION('',(0.,-1.));+#2161 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2162 = PCURVE('',#1723,#2163);+#2163 = DEFINITIONAL_REPRESENTATION('',(#2164),#2168);+#2164 = LINE('',#2165,#2166);+#2165 = CARTESIAN_POINT('',(0.,0.));+#2166 = VECTOR('',#2167,1.);+#2167 = DIRECTION('',(0.,1.));+#2168 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2169 = ADVANCED_FACE('',(#2170),#390,.F.);+#2170 = FACE_BOUND('',#2171,.F.);+#2171 = EDGE_LOOP('',(#2172,#2173,#2174,#2197,#2218,#2219,#2242,#2270,+ #2291,#2292,#2315,#2343,#2364,#2365,#2388,#2416,#2437,#2438,#2461,+ #2489,#2510,#2511,#2534,#2562));+#2172 = ORIENTED_EDGE('',*,*,#374,.F.);+#2173 = ORIENTED_EDGE('',*,*,#2124,.T.);+#2174 = ORIENTED_EDGE('',*,*,#2175,.T.);+#2175 = EDGE_CURVE('',#2125,#2176,#2178,.T.);+#2176 = VERTEX_POINT('',#2177);+#2177 = CARTESIAN_POINT('',(-1.49,-1.49,1.02));+#2178 = SURFACE_CURVE('',#2179,(#2183,#2190),.PCURVE_S1.);+#2179 = LINE('',#2180,#2181);+#2180 = CARTESIAN_POINT('',(-1.49,1.49,1.02));+#2181 = VECTOR('',#2182,1.);+#2182 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#2183 = PCURVE('',#390,#2184);+#2184 = DEFINITIONAL_REPRESENTATION('',(#2185),#2189);+#2185 = LINE('',#2186,#2187);+#2186 = CARTESIAN_POINT('',(1.,0.));+#2187 = VECTOR('',#2188,1.);+#2188 = DIRECTION('',(0.,1.));+#2189 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2190 = PCURVE('',#1723,#2191);+#2191 = DEFINITIONAL_REPRESENTATION('',(#2192),#2196);+#2192 = LINE('',#2193,#2194);+#2193 = CARTESIAN_POINT('',(0.,0.));+#2194 = VECTOR('',#2195,1.);+#2195 = DIRECTION('',(1.,0.));+#2196 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2197 = ORIENTED_EDGE('',*,*,#2198,.F.);+#2198 = EDGE_CURVE('',#940,#2176,#2199,.T.);+#2199 = SURFACE_CURVE('',#2200,(#2204,#2211),.PCURVE_S1.);+#2200 = LINE('',#2201,#2202);+#2201 = CARTESIAN_POINT('',(-1.49,-1.49,2.E-02));+#2202 = VECTOR('',#2203,1.);+#2203 = DIRECTION('',(0.,0.,1.));+#2204 = PCURVE('',#390,#2205);+#2205 = DEFINITIONAL_REPRESENTATION('',(#2206),#2210);+#2206 = LINE('',#2207,#2208);+#2207 = CARTESIAN_POINT('',(0.,2.98));+#2208 = VECTOR('',#2209,1.);+#2209 = DIRECTION('',(1.,0.));+#2210 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2211 = PCURVE('',#978,#2212);+#2212 = DEFINITIONAL_REPRESENTATION('',(#2213),#2217);+#2213 = LINE('',#2214,#2215);+#2214 = CARTESIAN_POINT('',(0.,0.));+#2215 = VECTOR('',#2216,1.);+#2216 = DIRECTION('',(1.,0.));+#2217 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2218 = ORIENTED_EDGE('',*,*,#939,.F.);+#2219 = ORIENTED_EDGE('',*,*,#2220,.T.);+#2220 = EDGE_CURVE('',#912,#2221,#2223,.T.);+#2221 = VERTEX_POINT('',#2222);+#2222 = CARTESIAN_POINT('',(-1.49,-1.125,0.2));+#2223 = SURFACE_CURVE('',#2224,(#2228,#2235),.PCURVE_S1.);+#2224 = LINE('',#2225,#2226);+#2225 = CARTESIAN_POINT('',(-1.49,-1.125,1.E-02));+#2226 = VECTOR('',#2227,1.);+#2227 = DIRECTION('',(0.,0.,1.));+#2228 = PCURVE('',#390,#2229);+#2229 = DEFINITIONAL_REPRESENTATION('',(#2230),#2234);+#2230 = LINE('',#2231,#2232);+#2231 = CARTESIAN_POINT('',(-1.E-02,2.615));+#2232 = VECTOR('',#2233,1.);+#2233 = DIRECTION('',(1.,0.));+#2234 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2235 = PCURVE('',#927,#2236);+#2236 = DEFINITIONAL_REPRESENTATION('',(#2237),#2241);+#2237 = LINE('',#2238,#2239);+#2238 = CARTESIAN_POINT('',(1.E-02,-1.E-02));+#2239 = VECTOR('',#2240,1.);+#2240 = DIRECTION('',(0.,-1.));+#2241 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2242 = ORIENTED_EDGE('',*,*,#2243,.F.);+#2243 = EDGE_CURVE('',#2244,#2221,#2246,.T.);+#2244 = VERTEX_POINT('',#2245);+#2245 = CARTESIAN_POINT('',(-1.49,-0.875,0.2));+#2246 = SURFACE_CURVE('',#2247,(#2251,#2258),.PCURVE_S1.);+#2247 = LINE('',#2248,#2249);+#2248 = CARTESIAN_POINT('',(-1.49,0.245,0.2));+#2249 = VECTOR('',#2250,1.);+#2250 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#2251 = PCURVE('',#390,#2252);+#2252 = DEFINITIONAL_REPRESENTATION('',(#2253),#2257);+#2253 = LINE('',#2254,#2255);+#2254 = CARTESIAN_POINT('',(0.18,1.245));+#2255 = VECTOR('',#2256,1.);+#2256 = DIRECTION('',(0.,1.));+#2257 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2258 = PCURVE('',#2259,#2264);+#2259 = PLANE('',#2260);+#2260 = AXIS2_PLACEMENT_3D('',#2261,#2262,#2263);+#2261 = CARTESIAN_POINT('',(-1.324839749899,-1.,0.2));+#2262 = DIRECTION('',(0.,0.,1.));+#2263 = DIRECTION('',(-4.669739647545E-16,-1.,0.));+#2264 = DEFINITIONAL_REPRESENTATION('',(#2265),#2269);+#2265 = LINE('',#2266,#2267);+#2266 = CARTESIAN_POINT('',(-1.245,-0.165160250101));+#2267 = VECTOR('',#2268,1.);+#2268 = DIRECTION('',(1.,2.449293598295E-16));+#2269 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2270 = ORIENTED_EDGE('',*,*,#2271,.T.);+#2271 = EDGE_CURVE('',#2244,#828,#2272,.T.);+#2272 = SURFACE_CURVE('',#2273,(#2277,#2284),.PCURVE_S1.);+#2273 = LINE('',#2274,#2275);+#2274 = CARTESIAN_POINT('',(-1.49,-0.875,1.E-02));+#2275 = VECTOR('',#2276,1.);+#2276 = DIRECTION('',(0.,-0.,-1.));+#2277 = PCURVE('',#390,#2278);+#2278 = DEFINITIONAL_REPRESENTATION('',(#2279),#2283);+#2279 = LINE('',#2280,#2281);+#2280 = CARTESIAN_POINT('',(-1.E-02,2.365));+#2281 = VECTOR('',#2282,1.);+#2282 = DIRECTION('',(-1.,-0.));+#2283 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2284 = PCURVE('',#866,#2285);+#2285 = DEFINITIONAL_REPRESENTATION('',(#2286),#2290);+#2286 = LINE('',#2287,#2288);+#2287 = CARTESIAN_POINT('',(0.265,-1.E-02));+#2288 = VECTOR('',#2289,1.);+#2289 = DIRECTION('',(0.,1.));+#2290 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2291 = ORIENTED_EDGE('',*,*,#827,.F.);+#2292 = ORIENTED_EDGE('',*,*,#2293,.T.);+#2293 = EDGE_CURVE('',#800,#2294,#2296,.T.);+#2294 = VERTEX_POINT('',#2295);+#2295 = CARTESIAN_POINT('',(-1.49,-0.625,0.2));+#2296 = SURFACE_CURVE('',#2297,(#2301,#2308),.PCURVE_S1.);+#2297 = LINE('',#2298,#2299);+#2298 = CARTESIAN_POINT('',(-1.49,-0.625,1.E-02));+#2299 = VECTOR('',#2300,1.);+#2300 = DIRECTION('',(0.,0.,1.));+#2301 = PCURVE('',#390,#2302);+#2302 = DEFINITIONAL_REPRESENTATION('',(#2303),#2307);+#2303 = LINE('',#2304,#2305);+#2304 = CARTESIAN_POINT('',(-1.E-02,2.115));+#2305 = VECTOR('',#2306,1.);+#2306 = DIRECTION('',(1.,0.));+#2307 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2308 = PCURVE('',#815,#2309);+#2309 = DEFINITIONAL_REPRESENTATION('',(#2310),#2314);+#2310 = LINE('',#2311,#2312);+#2311 = CARTESIAN_POINT('',(1.E-02,-1.E-02));+#2312 = VECTOR('',#2313,1.);+#2313 = DIRECTION('',(0.,-1.));+#2314 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2315 = ORIENTED_EDGE('',*,*,#2316,.F.);+#2316 = EDGE_CURVE('',#2317,#2294,#2319,.T.);+#2317 = VERTEX_POINT('',#2318);+#2318 = CARTESIAN_POINT('',(-1.49,-0.375,0.2));+#2319 = SURFACE_CURVE('',#2320,(#2324,#2331),.PCURVE_S1.);+#2320 = LINE('',#2321,#2322);+#2321 = CARTESIAN_POINT('',(-1.49,0.495,0.2));+#2322 = VECTOR('',#2323,1.);+#2323 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#2324 = PCURVE('',#390,#2325);+#2325 = DEFINITIONAL_REPRESENTATION('',(#2326),#2330);+#2326 = LINE('',#2327,#2328);+#2327 = CARTESIAN_POINT('',(0.18,0.995));+#2328 = VECTOR('',#2329,1.);+#2329 = DIRECTION('',(0.,1.));+#2330 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2331 = PCURVE('',#2332,#2337);+#2332 = PLANE('',#2333);+#2333 = AXIS2_PLACEMENT_3D('',#2334,#2335,#2336);+#2334 = CARTESIAN_POINT('',(-1.324839749899,-0.5,0.2));+#2335 = DIRECTION('',(0.,0.,1.));+#2336 = DIRECTION('',(-4.669739647545E-16,-1.,0.));+#2337 = DEFINITIONAL_REPRESENTATION('',(#2338),#2342);+#2338 = LINE('',#2339,#2340);+#2339 = CARTESIAN_POINT('',(-0.995,-0.165160250101));+#2340 = VECTOR('',#2341,1.);+#2341 = DIRECTION('',(1.,2.449293598295E-16));+#2342 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2343 = ORIENTED_EDGE('',*,*,#2344,.T.);+#2344 = EDGE_CURVE('',#2317,#716,#2345,.T.);+#2345 = SURFACE_CURVE('',#2346,(#2350,#2357),.PCURVE_S1.);+#2346 = LINE('',#2347,#2348);+#2347 = CARTESIAN_POINT('',(-1.49,-0.375,1.E-02));+#2348 = VECTOR('',#2349,1.);+#2349 = DIRECTION('',(0.,-0.,-1.));+#2350 = PCURVE('',#390,#2351);+#2351 = DEFINITIONAL_REPRESENTATION('',(#2352),#2356);+#2352 = LINE('',#2353,#2354);+#2353 = CARTESIAN_POINT('',(-1.E-02,1.865));+#2354 = VECTOR('',#2355,1.);+#2355 = DIRECTION('',(-1.,-0.));+#2356 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2357 = PCURVE('',#754,#2358);+#2358 = DEFINITIONAL_REPRESENTATION('',(#2359),#2363);+#2359 = LINE('',#2360,#2361);+#2360 = CARTESIAN_POINT('',(0.265,-1.E-02));+#2361 = VECTOR('',#2362,1.);+#2362 = DIRECTION('',(0.,1.));+#2363 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2364 = ORIENTED_EDGE('',*,*,#715,.F.);+#2365 = ORIENTED_EDGE('',*,*,#2366,.T.);+#2366 = EDGE_CURVE('',#688,#2367,#2369,.T.);+#2367 = VERTEX_POINT('',#2368);+#2368 = CARTESIAN_POINT('',(-1.49,-0.125,0.2));+#2369 = SURFACE_CURVE('',#2370,(#2374,#2381),.PCURVE_S1.);+#2370 = LINE('',#2371,#2372);+#2371 = CARTESIAN_POINT('',(-1.49,-0.125,1.E-02));+#2372 = VECTOR('',#2373,1.);+#2373 = DIRECTION('',(0.,0.,1.));+#2374 = PCURVE('',#390,#2375);+#2375 = DEFINITIONAL_REPRESENTATION('',(#2376),#2380);+#2376 = LINE('',#2377,#2378);+#2377 = CARTESIAN_POINT('',(-1.E-02,1.615));+#2378 = VECTOR('',#2379,1.);+#2379 = DIRECTION('',(1.,0.));+#2380 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2381 = PCURVE('',#703,#2382);+#2382 = DEFINITIONAL_REPRESENTATION('',(#2383),#2387);+#2383 = LINE('',#2384,#2385);+#2384 = CARTESIAN_POINT('',(1.E-02,-1.E-02));+#2385 = VECTOR('',#2386,1.);+#2386 = DIRECTION('',(0.,-1.));+#2387 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2388 = ORIENTED_EDGE('',*,*,#2389,.F.);+#2389 = EDGE_CURVE('',#2390,#2367,#2392,.T.);+#2390 = VERTEX_POINT('',#2391);+#2391 = CARTESIAN_POINT('',(-1.49,0.125,0.2));+#2392 = SURFACE_CURVE('',#2393,(#2397,#2404),.PCURVE_S1.);+#2393 = LINE('',#2394,#2395);+#2394 = CARTESIAN_POINT('',(-1.49,0.745,0.2));+#2395 = VECTOR('',#2396,1.);+#2396 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#2397 = PCURVE('',#390,#2398);+#2398 = DEFINITIONAL_REPRESENTATION('',(#2399),#2403);+#2399 = LINE('',#2400,#2401);+#2400 = CARTESIAN_POINT('',(0.18,0.745));+#2401 = VECTOR('',#2402,1.);+#2402 = DIRECTION('',(0.,1.));+#2403 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2404 = PCURVE('',#2405,#2410);+#2405 = PLANE('',#2406);+#2406 = AXIS2_PLACEMENT_3D('',#2407,#2408,#2409);+#2407 = CARTESIAN_POINT('',(-1.324839749899,4.996003610813E-16,0.2));+#2408 = DIRECTION('',(0.,0.,1.));+#2409 = DIRECTION('',(-4.669739647545E-16,-1.,0.));+#2410 = DEFINITIONAL_REPRESENTATION('',(#2411),#2415);+#2411 = LINE('',#2412,#2413);+#2412 = CARTESIAN_POINT('',(-0.745,-0.165160250101));+#2413 = VECTOR('',#2414,1.);+#2414 = DIRECTION('',(1.,2.449293598295E-16));+#2415 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2416 = ORIENTED_EDGE('',*,*,#2417,.T.);+#2417 = EDGE_CURVE('',#2390,#604,#2418,.T.);+#2418 = SURFACE_CURVE('',#2419,(#2423,#2430),.PCURVE_S1.);+#2419 = LINE('',#2420,#2421);+#2420 = CARTESIAN_POINT('',(-1.49,0.125,1.E-02));+#2421 = VECTOR('',#2422,1.);+#2422 = DIRECTION('',(0.,-0.,-1.));+#2423 = PCURVE('',#390,#2424);+#2424 = DEFINITIONAL_REPRESENTATION('',(#2425),#2429);+#2425 = LINE('',#2426,#2427);+#2426 = CARTESIAN_POINT('',(-1.E-02,1.365));+#2427 = VECTOR('',#2428,1.);+#2428 = DIRECTION('',(-1.,-0.));+#2429 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2430 = PCURVE('',#642,#2431);+#2431 = DEFINITIONAL_REPRESENTATION('',(#2432),#2436);+#2432 = LINE('',#2433,#2434);+#2433 = CARTESIAN_POINT('',(0.265,-1.E-02));+#2434 = VECTOR('',#2435,1.);+#2435 = DIRECTION('',(0.,1.));+#2436 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2437 = ORIENTED_EDGE('',*,*,#603,.F.);+#2438 = ORIENTED_EDGE('',*,*,#2439,.T.);+#2439 = EDGE_CURVE('',#576,#2440,#2442,.T.);+#2440 = VERTEX_POINT('',#2441);+#2441 = CARTESIAN_POINT('',(-1.49,0.375,0.2));+#2442 = SURFACE_CURVE('',#2443,(#2447,#2454),.PCURVE_S1.);+#2443 = LINE('',#2444,#2445);+#2444 = CARTESIAN_POINT('',(-1.49,0.375,1.E-02));+#2445 = VECTOR('',#2446,1.);+#2446 = DIRECTION('',(0.,0.,1.));+#2447 = PCURVE('',#390,#2448);+#2448 = DEFINITIONAL_REPRESENTATION('',(#2449),#2453);+#2449 = LINE('',#2450,#2451);+#2450 = CARTESIAN_POINT('',(-1.E-02,1.115));+#2451 = VECTOR('',#2452,1.);+#2452 = DIRECTION('',(1.,0.));+#2453 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2454 = PCURVE('',#591,#2455);+#2455 = DEFINITIONAL_REPRESENTATION('',(#2456),#2460);+#2456 = LINE('',#2457,#2458);+#2457 = CARTESIAN_POINT('',(1.E-02,-1.E-02));+#2458 = VECTOR('',#2459,1.);+#2459 = DIRECTION('',(0.,-1.));+#2460 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2461 = ORIENTED_EDGE('',*,*,#2462,.F.);+#2462 = EDGE_CURVE('',#2463,#2440,#2465,.T.);+#2463 = VERTEX_POINT('',#2464);+#2464 = CARTESIAN_POINT('',(-1.49,0.625,0.2));+#2465 = SURFACE_CURVE('',#2466,(#2470,#2477),.PCURVE_S1.);+#2466 = LINE('',#2467,#2468);+#2467 = CARTESIAN_POINT('',(-1.49,0.995,0.2));+#2468 = VECTOR('',#2469,1.);+#2469 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#2470 = PCURVE('',#390,#2471);+#2471 = DEFINITIONAL_REPRESENTATION('',(#2472),#2476);+#2472 = LINE('',#2473,#2474);+#2473 = CARTESIAN_POINT('',(0.18,0.495));+#2474 = VECTOR('',#2475,1.);+#2475 = DIRECTION('',(0.,1.));+#2476 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2477 = PCURVE('',#2478,#2483);+#2478 = PLANE('',#2479);+#2479 = AXIS2_PLACEMENT_3D('',#2480,#2481,#2482);+#2480 = CARTESIAN_POINT('',(-1.324839749899,0.5,0.2));+#2481 = DIRECTION('',(0.,0.,1.));+#2482 = DIRECTION('',(-4.669739647545E-16,-1.,0.));+#2483 = DEFINITIONAL_REPRESENTATION('',(#2484),#2488);+#2484 = LINE('',#2485,#2486);+#2485 = CARTESIAN_POINT('',(-0.495,-0.165160250101));+#2486 = VECTOR('',#2487,1.);+#2487 = DIRECTION('',(1.,2.449293598295E-16));+#2488 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2489 = ORIENTED_EDGE('',*,*,#2490,.T.);+#2490 = EDGE_CURVE('',#2463,#492,#2491,.T.);+#2491 = SURFACE_CURVE('',#2492,(#2496,#2503),.PCURVE_S1.);+#2492 = LINE('',#2493,#2494);+#2493 = CARTESIAN_POINT('',(-1.49,0.625,1.E-02));+#2494 = VECTOR('',#2495,1.);+#2495 = DIRECTION('',(0.,-0.,-1.));+#2496 = PCURVE('',#390,#2497);+#2497 = DEFINITIONAL_REPRESENTATION('',(#2498),#2502);+#2498 = LINE('',#2499,#2500);+#2499 = CARTESIAN_POINT('',(-1.E-02,0.865));+#2500 = VECTOR('',#2501,1.);+#2501 = DIRECTION('',(-1.,-0.));+#2502 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2503 = PCURVE('',#530,#2504);+#2504 = DEFINITIONAL_REPRESENTATION('',(#2505),#2509);+#2505 = LINE('',#2506,#2507);+#2506 = CARTESIAN_POINT('',(0.265,-1.E-02));+#2507 = VECTOR('',#2508,1.);+#2508 = DIRECTION('',(0.,1.));+#2509 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2510 = ORIENTED_EDGE('',*,*,#491,.F.);+#2511 = ORIENTED_EDGE('',*,*,#2512,.T.);+#2512 = EDGE_CURVE('',#464,#2513,#2515,.T.);+#2513 = VERTEX_POINT('',#2514);+#2514 = CARTESIAN_POINT('',(-1.49,0.875,0.2));+#2515 = SURFACE_CURVE('',#2516,(#2520,#2527),.PCURVE_S1.);+#2516 = LINE('',#2517,#2518);+#2517 = CARTESIAN_POINT('',(-1.49,0.875,1.E-02));+#2518 = VECTOR('',#2519,1.);+#2519 = DIRECTION('',(0.,0.,1.));+#2520 = PCURVE('',#390,#2521);+#2521 = DEFINITIONAL_REPRESENTATION('',(#2522),#2526);+#2522 = LINE('',#2523,#2524);+#2523 = CARTESIAN_POINT('',(-1.E-02,0.615));+#2524 = VECTOR('',#2525,1.);+#2525 = DIRECTION('',(1.,0.));+#2526 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2527 = PCURVE('',#479,#2528);+#2528 = DEFINITIONAL_REPRESENTATION('',(#2529),#2533);+#2529 = LINE('',#2530,#2531);+#2530 = CARTESIAN_POINT('',(1.E-02,-1.E-02));+#2531 = VECTOR('',#2532,1.);+#2532 = DIRECTION('',(0.,-1.));+#2533 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2534 = ORIENTED_EDGE('',*,*,#2535,.F.);+#2535 = EDGE_CURVE('',#2536,#2513,#2538,.T.);+#2536 = VERTEX_POINT('',#2537);+#2537 = CARTESIAN_POINT('',(-1.49,1.125,0.2));+#2538 = SURFACE_CURVE('',#2539,(#2543,#2550),.PCURVE_S1.);+#2539 = LINE('',#2540,#2541);+#2540 = CARTESIAN_POINT('',(-1.49,1.245,0.2));+#2541 = VECTOR('',#2542,1.);+#2542 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#2543 = PCURVE('',#390,#2544);+#2544 = DEFINITIONAL_REPRESENTATION('',(#2545),#2549);+#2545 = LINE('',#2546,#2547);+#2546 = CARTESIAN_POINT('',(0.18,0.245));+#2547 = VECTOR('',#2548,1.);+#2548 = DIRECTION('',(0.,1.));+#2549 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2550 = PCURVE('',#2551,#2556);+#2551 = PLANE('',#2552);+#2552 = AXIS2_PLACEMENT_3D('',#2553,#2554,#2555);+#2553 = CARTESIAN_POINT('',(-1.324839749899,1.,0.2));+#2554 = DIRECTION('',(0.,0.,1.));+#2555 = DIRECTION('',(-4.669739647545E-16,-1.,0.));+#2556 = DEFINITIONAL_REPRESENTATION('',(#2557),#2561);+#2557 = LINE('',#2558,#2559);+#2558 = CARTESIAN_POINT('',(-0.245,-0.165160250101));+#2559 = VECTOR('',#2560,1.);+#2560 = DIRECTION('',(1.,2.449293598295E-16));+#2561 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2562 = ORIENTED_EDGE('',*,*,#2563,.T.);+#2563 = EDGE_CURVE('',#2536,#375,#2564,.T.);+#2564 = SURFACE_CURVE('',#2565,(#2569,#2576),.PCURVE_S1.);+#2565 = LINE('',#2566,#2567);+#2566 = CARTESIAN_POINT('',(-1.49,1.125,1.E-02));+#2567 = VECTOR('',#2568,1.);+#2568 = DIRECTION('',(0.,-0.,-1.));+#2569 = PCURVE('',#390,#2570);+#2570 = DEFINITIONAL_REPRESENTATION('',(#2571),#2575);+#2571 = LINE('',#2572,#2573);+#2572 = CARTESIAN_POINT('',(-1.E-02,0.365));+#2573 = VECTOR('',#2574,1.);+#2574 = DIRECTION('',(-1.,-0.));+#2575 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2576 = PCURVE('',#418,#2577);+#2577 = DEFINITIONAL_REPRESENTATION('',(#2578),#2582);+#2578 = LINE('',#2579,#2580);+#2579 = CARTESIAN_POINT('',(0.265,-1.E-02));+#2580 = VECTOR('',#2581,1.);+#2581 = DIRECTION('',(0.,1.));+#2582 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2583 = ADVANCED_FACE('',(#2584),#418,.F.);+#2584 = FACE_BOUND('',#2585,.F.);+#2585 = EDGE_LOOP('',(#2586,#2616,#2637,#2638,#2639,#2662));+#2586 = ORIENTED_EDGE('',*,*,#2587,.F.);+#2587 = EDGE_CURVE('',#2588,#2590,#2592,.T.);+#2588 = VERTEX_POINT('',#2589);+#2589 = CARTESIAN_POINT('',(-1.225,1.125,0.));+#2590 = VERTEX_POINT('',#2591);+#2591 = CARTESIAN_POINT('',(-1.5,1.125,0.));+#2592 = SURFACE_CURVE('',#2593,(#2597,#2604),.PCURVE_S1.);+#2593 = LINE('',#2594,#2595);+#2594 = CARTESIAN_POINT('',(-1.225,1.125,0.));+#2595 = VECTOR('',#2596,1.);+#2596 = DIRECTION('',(-1.,4.669739647545E-16,0.));+#2597 = PCURVE('',#418,#2598);+#2598 = DEFINITIONAL_REPRESENTATION('',(#2599),#2603);+#2599 = LINE('',#2600,#2601);+#2600 = CARTESIAN_POINT('',(0.,0.));+#2601 = VECTOR('',#2602,1.);+#2602 = DIRECTION('',(1.,0.));+#2603 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2604 = PCURVE('',#2605,#2610);+#2605 = PLANE('',#2606);+#2606 = AXIS2_PLACEMENT_3D('',#2607,#2608,#2609);+#2607 = CARTESIAN_POINT('',(-1.324839749899,1.,0.));+#2608 = DIRECTION('',(0.,0.,1.));+#2609 = DIRECTION('',(-4.669739647545E-16,-1.,0.));+#2610 = DEFINITIONAL_REPRESENTATION('',(#2611),#2615);+#2611 = LINE('',#2612,#2613);+#2612 = CARTESIAN_POINT('',(-0.125,9.9839749899E-02));+#2613 = VECTOR('',#2614,1.);+#2614 = DIRECTION('',(0.,-1.));+#2615 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2616 = ORIENTED_EDGE('',*,*,#2617,.T.);+#2617 = EDGE_CURVE('',#2588,#403,#2618,.T.);+#2618 = SURFACE_CURVE('',#2619,(#2623,#2630),.PCURVE_S1.);+#2619 = LINE('',#2620,#2621);+#2620 = CARTESIAN_POINT('',(-1.225,1.125,0.));+#2621 = VECTOR('',#2622,1.);+#2622 = DIRECTION('',(0.,0.,1.));+#2623 = PCURVE('',#418,#2624);+#2624 = DEFINITIONAL_REPRESENTATION('',(#2625),#2629);+#2625 = LINE('',#2626,#2627);+#2626 = CARTESIAN_POINT('',(0.,0.));+#2627 = VECTOR('',#2628,1.);+#2628 = DIRECTION('',(0.,-1.));+#2629 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2630 = PCURVE('',#451,#2631);+#2631 = DEFINITIONAL_REPRESENTATION('',(#2632),#2636);+#2632 = LINE('',#2633,#2634);+#2633 = CARTESIAN_POINT('',(3.14159265359,0.));+#2634 = VECTOR('',#2635,1.);+#2635 = DIRECTION('',(-0.,-1.));+#2636 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2637 = ORIENTED_EDGE('',*,*,#402,.F.);+#2638 = ORIENTED_EDGE('',*,*,#2563,.F.);+#2639 = ORIENTED_EDGE('',*,*,#2640,.T.);+#2640 = EDGE_CURVE('',#2536,#2641,#2643,.T.);+#2641 = VERTEX_POINT('',#2642);+#2642 = CARTESIAN_POINT('',(-1.5,1.125,0.2));+#2643 = SURFACE_CURVE('',#2644,(#2648,#2655),.PCURVE_S1.);+#2644 = LINE('',#2645,#2646);+#2645 = CARTESIAN_POINT('',(-1.225,1.125,0.2));+#2646 = VECTOR('',#2647,1.);+#2647 = DIRECTION('',(-1.,4.669739647545E-16,0.));+#2648 = PCURVE('',#418,#2649);+#2649 = DEFINITIONAL_REPRESENTATION('',(#2650),#2654);+#2650 = LINE('',#2651,#2652);+#2651 = CARTESIAN_POINT('',(0.,-0.2));+#2652 = VECTOR('',#2653,1.);+#2653 = DIRECTION('',(1.,0.));+#2654 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2655 = PCURVE('',#2551,#2656);+#2656 = DEFINITIONAL_REPRESENTATION('',(#2657),#2661);+#2657 = LINE('',#2658,#2659);+#2658 = CARTESIAN_POINT('',(-0.125,9.9839749899E-02));+#2659 = VECTOR('',#2660,1.);+#2660 = DIRECTION('',(0.,-1.));+#2661 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2662 = ORIENTED_EDGE('',*,*,#2663,.F.);+#2663 = EDGE_CURVE('',#2590,#2641,#2664,.T.);+#2664 = SURFACE_CURVE('',#2665,(#2669,#2676),.PCURVE_S1.);+#2665 = LINE('',#2666,#2667);+#2666 = CARTESIAN_POINT('',(-1.5,1.125,0.));+#2667 = VECTOR('',#2668,1.);+#2668 = DIRECTION('',(0.,0.,1.));+#2669 = PCURVE('',#418,#2670);+#2670 = DEFINITIONAL_REPRESENTATION('',(#2671),#2675);+#2671 = LINE('',#2672,#2673);+#2672 = CARTESIAN_POINT('',(0.275,0.));+#2673 = VECTOR('',#2674,1.);+#2674 = DIRECTION('',(0.,-1.));+#2675 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2676 = PCURVE('',#2677,#2682);+#2677 = PLANE('',#2678);+#2678 = AXIS2_PLACEMENT_3D('',#2679,#2680,#2681);+#2679 = CARTESIAN_POINT('',(-1.5,1.125,0.));+#2680 = DIRECTION('',(1.,-4.669739647545E-16,0.));+#2681 = DIRECTION('',(-4.669739647545E-16,-1.,0.));+#2682 = DEFINITIONAL_REPRESENTATION('',(#2683),#2687);+#2683 = LINE('',#2684,#2685);+#2684 = CARTESIAN_POINT('',(0.,0.));+#2685 = VECTOR('',#2686,1.);+#2686 = DIRECTION('',(0.,-1.));+#2687 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2688 = ADVANCED_FACE('',(#2689),#451,.T.);+#2689 = FACE_BOUND('',#2690,.T.);+#2690 = EDGE_LOOP('',(#2691,#2692,#2693,#2716));+#2691 = ORIENTED_EDGE('',*,*,#2617,.T.);+#2692 = ORIENTED_EDGE('',*,*,#430,.T.);+#2693 = ORIENTED_EDGE('',*,*,#2694,.F.);+#2694 = EDGE_CURVE('',#2695,#431,#2697,.T.);+#2695 = VERTEX_POINT('',#2696);+#2696 = CARTESIAN_POINT('',(-1.225,0.875,0.));+#2697 = SURFACE_CURVE('',#2698,(#2702,#2709),.PCURVE_S1.);+#2698 = LINE('',#2699,#2700);+#2699 = CARTESIAN_POINT('',(-1.225,0.875,0.));+#2700 = VECTOR('',#2701,1.);+#2701 = DIRECTION('',(0.,0.,1.));+#2702 = PCURVE('',#451,#2703);+#2703 = DEFINITIONAL_REPRESENTATION('',(#2704),#2708);+#2704 = LINE('',#2705,#2706);+#2705 = CARTESIAN_POINT('',(6.28318530718,0.));+#2706 = VECTOR('',#2707,1.);+#2707 = DIRECTION('',(-0.,-1.));+#2708 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2709 = PCURVE('',#479,#2710);+#2710 = DEFINITIONAL_REPRESENTATION('',(#2711),#2715);+#2711 = LINE('',#2712,#2713);+#2712 = CARTESIAN_POINT('',(0.275,0.));+#2713 = VECTOR('',#2714,1.);+#2714 = DIRECTION('',(0.,-1.));+#2715 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2716 = ORIENTED_EDGE('',*,*,#2717,.T.);+#2717 = EDGE_CURVE('',#2695,#2588,#2718,.T.);+#2718 = SURFACE_CURVE('',#2719,(#2724,#2731),.PCURVE_S1.);+#2719 = CIRCLE('',#2720,0.125);+#2720 = AXIS2_PLACEMENT_3D('',#2721,#2722,#2723);+#2721 = CARTESIAN_POINT('',(-1.225,1.,0.));+#2722 = DIRECTION('',(0.,0.,1.));+#2723 = DIRECTION('',(-4.669739647545E-16,-1.,0.));+#2724 = PCURVE('',#451,#2725);+#2725 = DEFINITIONAL_REPRESENTATION('',(#2726),#2730);+#2726 = LINE('',#2727,#2728);+#2727 = CARTESIAN_POINT('',(6.28318530718,0.));+#2728 = VECTOR('',#2729,1.);+#2729 = DIRECTION('',(-1.,0.));+#2730 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2731 = PCURVE('',#2605,#2732);+#2732 = DEFINITIONAL_REPRESENTATION('',(#2733),#2737);+#2733 = CIRCLE('',#2734,0.125);+#2734 = AXIS2_PLACEMENT_2D('',#2735,#2736);+#2735 = CARTESIAN_POINT('',(-4.662256385043E-17,9.9839749899E-02));+#2736 = DIRECTION('',(1.,0.));+#2737 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2738 = ADVANCED_FACE('',(#2739),#479,.F.);+#2739 = FACE_BOUND('',#2740,.F.);+#2740 = EDGE_LOOP('',(#2741,#2764,#2787,#2808,#2809,#2810));+#2741 = ORIENTED_EDGE('',*,*,#2742,.F.);+#2742 = EDGE_CURVE('',#2743,#2695,#2745,.T.);+#2743 = VERTEX_POINT('',#2744);+#2744 = CARTESIAN_POINT('',(-1.5,0.875,0.));+#2745 = SURFACE_CURVE('',#2746,(#2750,#2757),.PCURVE_S1.);+#2746 = LINE('',#2747,#2748);+#2747 = CARTESIAN_POINT('',(-1.5,0.875,0.));+#2748 = VECTOR('',#2749,1.);+#2749 = DIRECTION('',(1.,-4.669739647545E-16,0.));+#2750 = PCURVE('',#479,#2751);+#2751 = DEFINITIONAL_REPRESENTATION('',(#2752),#2756);+#2752 = LINE('',#2753,#2754);+#2753 = CARTESIAN_POINT('',(0.,0.));+#2754 = VECTOR('',#2755,1.);+#2755 = DIRECTION('',(1.,0.));+#2756 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2757 = PCURVE('',#2605,#2758);+#2758 = DEFINITIONAL_REPRESENTATION('',(#2759),#2763);+#2759 = LINE('',#2760,#2761);+#2760 = CARTESIAN_POINT('',(0.125,-0.175160250101));+#2761 = VECTOR('',#2762,1.);+#2762 = DIRECTION('',(0.,1.));+#2763 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2764 = ORIENTED_EDGE('',*,*,#2765,.T.);+#2765 = EDGE_CURVE('',#2743,#2766,#2768,.T.);+#2766 = VERTEX_POINT('',#2767);+#2767 = CARTESIAN_POINT('',(-1.5,0.875,0.2));+#2768 = SURFACE_CURVE('',#2769,(#2773,#2780),.PCURVE_S1.);+#2769 = LINE('',#2770,#2771);+#2770 = CARTESIAN_POINT('',(-1.5,0.875,0.));+#2771 = VECTOR('',#2772,1.);+#2772 = DIRECTION('',(0.,0.,1.));+#2773 = PCURVE('',#479,#2774);+#2774 = DEFINITIONAL_REPRESENTATION('',(#2775),#2779);+#2775 = LINE('',#2776,#2777);+#2776 = CARTESIAN_POINT('',(0.,0.));+#2777 = VECTOR('',#2778,1.);+#2778 = DIRECTION('',(0.,-1.));+#2779 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2780 = PCURVE('',#2677,#2781);+#2781 = DEFINITIONAL_REPRESENTATION('',(#2782),#2786);+#2782 = LINE('',#2783,#2784);+#2783 = CARTESIAN_POINT('',(0.25,0.));+#2784 = VECTOR('',#2785,1.);+#2785 = DIRECTION('',(0.,-1.));+#2786 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2787 = ORIENTED_EDGE('',*,*,#2788,.T.);+#2788 = EDGE_CURVE('',#2766,#2513,#2789,.T.);+#2789 = SURFACE_CURVE('',#2790,(#2794,#2801),.PCURVE_S1.);+#2790 = LINE('',#2791,#2792);+#2791 = CARTESIAN_POINT('',(-1.5,0.875,0.2));+#2792 = VECTOR('',#2793,1.);+#2793 = DIRECTION('',(1.,-4.669739647545E-16,0.));+#2794 = PCURVE('',#479,#2795);+#2795 = DEFINITIONAL_REPRESENTATION('',(#2796),#2800);+#2796 = LINE('',#2797,#2798);+#2797 = CARTESIAN_POINT('',(0.,-0.2));+#2798 = VECTOR('',#2799,1.);+#2799 = DIRECTION('',(1.,0.));+#2800 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2801 = PCURVE('',#2551,#2802);+#2802 = DEFINITIONAL_REPRESENTATION('',(#2803),#2807);+#2803 = LINE('',#2804,#2805);+#2804 = CARTESIAN_POINT('',(0.125,-0.175160250101));+#2805 = VECTOR('',#2806,1.);+#2806 = DIRECTION('',(0.,1.));+#2807 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2808 = ORIENTED_EDGE('',*,*,#2512,.F.);+#2809 = ORIENTED_EDGE('',*,*,#463,.F.);+#2810 = ORIENTED_EDGE('',*,*,#2694,.F.);+#2811 = ADVANCED_FACE('',(#2812),#530,.F.);+#2812 = FACE_BOUND('',#2813,.F.);+#2813 = EDGE_LOOP('',(#2814,#2844,#2865,#2866,#2867,#2890));+#2814 = ORIENTED_EDGE('',*,*,#2815,.F.);+#2815 = EDGE_CURVE('',#2816,#2818,#2820,.T.);+#2816 = VERTEX_POINT('',#2817);+#2817 = CARTESIAN_POINT('',(-1.225,0.625,0.));+#2818 = VERTEX_POINT('',#2819);+#2819 = CARTESIAN_POINT('',(-1.5,0.625,0.));+#2820 = SURFACE_CURVE('',#2821,(#2825,#2832),.PCURVE_S1.);+#2821 = LINE('',#2822,#2823);+#2822 = CARTESIAN_POINT('',(-1.225,0.625,0.));+#2823 = VECTOR('',#2824,1.);+#2824 = DIRECTION('',(-1.,4.669739647545E-16,0.));+#2825 = PCURVE('',#530,#2826);+#2826 = DEFINITIONAL_REPRESENTATION('',(#2827),#2831);+#2827 = LINE('',#2828,#2829);+#2828 = CARTESIAN_POINT('',(0.,0.));+#2829 = VECTOR('',#2830,1.);+#2830 = DIRECTION('',(1.,0.));+#2831 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2832 = PCURVE('',#2833,#2838);+#2833 = PLANE('',#2834);+#2834 = AXIS2_PLACEMENT_3D('',#2835,#2836,#2837);+#2835 = CARTESIAN_POINT('',(-1.324839749899,0.5,0.));+#2836 = DIRECTION('',(0.,0.,1.));+#2837 = DIRECTION('',(-4.669739647545E-16,-1.,0.));+#2838 = DEFINITIONAL_REPRESENTATION('',(#2839),#2843);+#2839 = LINE('',#2840,#2841);+#2840 = CARTESIAN_POINT('',(-0.125,9.9839749899E-02));+#2841 = VECTOR('',#2842,1.);+#2842 = DIRECTION('',(0.,-1.));+#2843 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2844 = ORIENTED_EDGE('',*,*,#2845,.T.);+#2845 = EDGE_CURVE('',#2816,#515,#2846,.T.);+#2846 = SURFACE_CURVE('',#2847,(#2851,#2858),.PCURVE_S1.);+#2847 = LINE('',#2848,#2849);+#2848 = CARTESIAN_POINT('',(-1.225,0.625,0.));+#2849 = VECTOR('',#2850,1.);+#2850 = DIRECTION('',(0.,0.,1.));+#2851 = PCURVE('',#530,#2852);+#2852 = DEFINITIONAL_REPRESENTATION('',(#2853),#2857);+#2853 = LINE('',#2854,#2855);+#2854 = CARTESIAN_POINT('',(0.,0.));+#2855 = VECTOR('',#2856,1.);+#2856 = DIRECTION('',(0.,-1.));+#2857 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2858 = PCURVE('',#563,#2859);+#2859 = DEFINITIONAL_REPRESENTATION('',(#2860),#2864);+#2860 = LINE('',#2861,#2862);+#2861 = CARTESIAN_POINT('',(3.14159265359,0.));+#2862 = VECTOR('',#2863,1.);+#2863 = DIRECTION('',(-0.,-1.));+#2864 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2865 = ORIENTED_EDGE('',*,*,#514,.F.);+#2866 = ORIENTED_EDGE('',*,*,#2490,.F.);+#2867 = ORIENTED_EDGE('',*,*,#2868,.T.);+#2868 = EDGE_CURVE('',#2463,#2869,#2871,.T.);+#2869 = VERTEX_POINT('',#2870);+#2870 = CARTESIAN_POINT('',(-1.5,0.625,0.2));+#2871 = SURFACE_CURVE('',#2872,(#2876,#2883),.PCURVE_S1.);+#2872 = LINE('',#2873,#2874);+#2873 = CARTESIAN_POINT('',(-1.225,0.625,0.2));+#2874 = VECTOR('',#2875,1.);+#2875 = DIRECTION('',(-1.,4.669739647545E-16,0.));+#2876 = PCURVE('',#530,#2877);+#2877 = DEFINITIONAL_REPRESENTATION('',(#2878),#2882);+#2878 = LINE('',#2879,#2880);+#2879 = CARTESIAN_POINT('',(0.,-0.2));+#2880 = VECTOR('',#2881,1.);+#2881 = DIRECTION('',(1.,0.));+#2882 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2883 = PCURVE('',#2478,#2884);+#2884 = DEFINITIONAL_REPRESENTATION('',(#2885),#2889);+#2885 = LINE('',#2886,#2887);+#2886 = CARTESIAN_POINT('',(-0.125,9.9839749899E-02));+#2887 = VECTOR('',#2888,1.);+#2888 = DIRECTION('',(0.,-1.));+#2889 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2890 = ORIENTED_EDGE('',*,*,#2891,.F.);+#2891 = EDGE_CURVE('',#2818,#2869,#2892,.T.);+#2892 = SURFACE_CURVE('',#2893,(#2897,#2904),.PCURVE_S1.);+#2893 = LINE('',#2894,#2895);+#2894 = CARTESIAN_POINT('',(-1.5,0.625,0.));+#2895 = VECTOR('',#2896,1.);+#2896 = DIRECTION('',(0.,0.,1.));+#2897 = PCURVE('',#530,#2898);+#2898 = DEFINITIONAL_REPRESENTATION('',(#2899),#2903);+#2899 = LINE('',#2900,#2901);+#2900 = CARTESIAN_POINT('',(0.275,0.));+#2901 = VECTOR('',#2902,1.);+#2902 = DIRECTION('',(0.,-1.));+#2903 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2904 = PCURVE('',#2905,#2910);+#2905 = PLANE('',#2906);+#2906 = AXIS2_PLACEMENT_3D('',#2907,#2908,#2909);+#2907 = CARTESIAN_POINT('',(-1.5,0.625,0.));+#2908 = DIRECTION('',(1.,-4.669739647545E-16,0.));+#2909 = DIRECTION('',(-4.669739647545E-16,-1.,0.));+#2910 = DEFINITIONAL_REPRESENTATION('',(#2911),#2915);+#2911 = LINE('',#2912,#2913);+#2912 = CARTESIAN_POINT('',(0.,0.));+#2913 = VECTOR('',#2914,1.);+#2914 = DIRECTION('',(0.,-1.));+#2915 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2916 = ADVANCED_FACE('',(#2917),#563,.T.);+#2917 = FACE_BOUND('',#2918,.T.);+#2918 = EDGE_LOOP('',(#2919,#2920,#2921,#2944));+#2919 = ORIENTED_EDGE('',*,*,#2845,.T.);+#2920 = ORIENTED_EDGE('',*,*,#542,.T.);+#2921 = ORIENTED_EDGE('',*,*,#2922,.F.);+#2922 = EDGE_CURVE('',#2923,#543,#2925,.T.);+#2923 = VERTEX_POINT('',#2924);+#2924 = CARTESIAN_POINT('',(-1.225,0.375,0.));+#2925 = SURFACE_CURVE('',#2926,(#2930,#2937),.PCURVE_S1.);+#2926 = LINE('',#2927,#2928);+#2927 = CARTESIAN_POINT('',(-1.225,0.375,0.));+#2928 = VECTOR('',#2929,1.);+#2929 = DIRECTION('',(0.,0.,1.));+#2930 = PCURVE('',#563,#2931);+#2931 = DEFINITIONAL_REPRESENTATION('',(#2932),#2936);+#2932 = LINE('',#2933,#2934);+#2933 = CARTESIAN_POINT('',(6.28318530718,0.));+#2934 = VECTOR('',#2935,1.);+#2935 = DIRECTION('',(-0.,-1.));+#2936 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2937 = PCURVE('',#591,#2938);+#2938 = DEFINITIONAL_REPRESENTATION('',(#2939),#2943);+#2939 = LINE('',#2940,#2941);+#2940 = CARTESIAN_POINT('',(0.275,0.));+#2941 = VECTOR('',#2942,1.);+#2942 = DIRECTION('',(0.,-1.));+#2943 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2944 = ORIENTED_EDGE('',*,*,#2945,.T.);+#2945 = EDGE_CURVE('',#2923,#2816,#2946,.T.);+#2946 = SURFACE_CURVE('',#2947,(#2952,#2959),.PCURVE_S1.);+#2947 = CIRCLE('',#2948,0.125);+#2948 = AXIS2_PLACEMENT_3D('',#2949,#2950,#2951);+#2949 = CARTESIAN_POINT('',(-1.225,0.5,0.));+#2950 = DIRECTION('',(0.,0.,1.));+#2951 = DIRECTION('',(-4.669739647545E-16,-1.,0.));+#2952 = PCURVE('',#563,#2953);+#2953 = DEFINITIONAL_REPRESENTATION('',(#2954),#2958);+#2954 = LINE('',#2955,#2956);+#2955 = CARTESIAN_POINT('',(6.28318530718,0.));+#2956 = VECTOR('',#2957,1.);+#2957 = DIRECTION('',(-1.,0.));+#2958 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2959 = PCURVE('',#2833,#2960);+#2960 = DEFINITIONAL_REPRESENTATION('',(#2961),#2965);+#2961 = CIRCLE('',#2962,0.125);+#2962 = AXIS2_PLACEMENT_2D('',#2963,#2964);+#2963 = CARTESIAN_POINT('',(-4.662256385043E-17,9.9839749899E-02));+#2964 = DIRECTION('',(1.,0.));+#2965 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2966 = ADVANCED_FACE('',(#2967),#591,.F.);+#2967 = FACE_BOUND('',#2968,.F.);+#2968 = EDGE_LOOP('',(#2969,#2992,#3015,#3036,#3037,#3038));+#2969 = ORIENTED_EDGE('',*,*,#2970,.F.);+#2970 = EDGE_CURVE('',#2971,#2923,#2973,.T.);+#2971 = VERTEX_POINT('',#2972);+#2972 = CARTESIAN_POINT('',(-1.5,0.375,0.));+#2973 = SURFACE_CURVE('',#2974,(#2978,#2985),.PCURVE_S1.);+#2974 = LINE('',#2975,#2976);+#2975 = CARTESIAN_POINT('',(-1.5,0.375,0.));+#2976 = VECTOR('',#2977,1.);+#2977 = DIRECTION('',(1.,-4.669739647545E-16,0.));+#2978 = PCURVE('',#591,#2979);+#2979 = DEFINITIONAL_REPRESENTATION('',(#2980),#2984);+#2980 = LINE('',#2981,#2982);+#2981 = CARTESIAN_POINT('',(0.,0.));+#2982 = VECTOR('',#2983,1.);+#2983 = DIRECTION('',(1.,0.));+#2984 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2985 = PCURVE('',#2833,#2986);+#2986 = DEFINITIONAL_REPRESENTATION('',(#2987),#2991);+#2987 = LINE('',#2988,#2989);+#2988 = CARTESIAN_POINT('',(0.125,-0.175160250101));+#2989 = VECTOR('',#2990,1.);+#2990 = DIRECTION('',(0.,1.));+#2991 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2992 = ORIENTED_EDGE('',*,*,#2993,.T.);+#2993 = EDGE_CURVE('',#2971,#2994,#2996,.T.);+#2994 = VERTEX_POINT('',#2995);+#2995 = CARTESIAN_POINT('',(-1.5,0.375,0.2));+#2996 = SURFACE_CURVE('',#2997,(#3001,#3008),.PCURVE_S1.);+#2997 = LINE('',#2998,#2999);+#2998 = CARTESIAN_POINT('',(-1.5,0.375,0.));+#2999 = VECTOR('',#3000,1.);+#3000 = DIRECTION('',(0.,0.,1.));+#3001 = PCURVE('',#591,#3002);+#3002 = DEFINITIONAL_REPRESENTATION('',(#3003),#3007);+#3003 = LINE('',#3004,#3005);+#3004 = CARTESIAN_POINT('',(0.,0.));+#3005 = VECTOR('',#3006,1.);+#3006 = DIRECTION('',(0.,-1.));+#3007 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3008 = PCURVE('',#2905,#3009);+#3009 = DEFINITIONAL_REPRESENTATION('',(#3010),#3014);+#3010 = LINE('',#3011,#3012);+#3011 = CARTESIAN_POINT('',(0.25,0.));+#3012 = VECTOR('',#3013,1.);+#3013 = DIRECTION('',(0.,-1.));+#3014 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3015 = ORIENTED_EDGE('',*,*,#3016,.T.);+#3016 = EDGE_CURVE('',#2994,#2440,#3017,.T.);+#3017 = SURFACE_CURVE('',#3018,(#3022,#3029),.PCURVE_S1.);+#3018 = LINE('',#3019,#3020);+#3019 = CARTESIAN_POINT('',(-1.5,0.375,0.2));+#3020 = VECTOR('',#3021,1.);+#3021 = DIRECTION('',(1.,-4.669739647545E-16,0.));+#3022 = PCURVE('',#591,#3023);+#3023 = DEFINITIONAL_REPRESENTATION('',(#3024),#3028);+#3024 = LINE('',#3025,#3026);+#3025 = CARTESIAN_POINT('',(0.,-0.2));+#3026 = VECTOR('',#3027,1.);+#3027 = DIRECTION('',(1.,0.));+#3028 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3029 = PCURVE('',#2478,#3030);+#3030 = DEFINITIONAL_REPRESENTATION('',(#3031),#3035);+#3031 = LINE('',#3032,#3033);+#3032 = CARTESIAN_POINT('',(0.125,-0.175160250101));+#3033 = VECTOR('',#3034,1.);+#3034 = DIRECTION('',(0.,1.));+#3035 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3036 = ORIENTED_EDGE('',*,*,#2439,.F.);+#3037 = ORIENTED_EDGE('',*,*,#575,.F.);+#3038 = ORIENTED_EDGE('',*,*,#2922,.F.);+#3039 = ADVANCED_FACE('',(#3040),#642,.F.);+#3040 = FACE_BOUND('',#3041,.F.);+#3041 = EDGE_LOOP('',(#3042,#3072,#3093,#3094,#3095,#3118));+#3042 = ORIENTED_EDGE('',*,*,#3043,.F.);+#3043 = EDGE_CURVE('',#3044,#3046,#3048,.T.);+#3044 = VERTEX_POINT('',#3045);+#3045 = CARTESIAN_POINT('',(-1.225,0.125,0.));+#3046 = VERTEX_POINT('',#3047);+#3047 = CARTESIAN_POINT('',(-1.5,0.125,0.));+#3048 = SURFACE_CURVE('',#3049,(#3053,#3060),.PCURVE_S1.);+#3049 = LINE('',#3050,#3051);+#3050 = CARTESIAN_POINT('',(-1.225,0.125,0.));+#3051 = VECTOR('',#3052,1.);+#3052 = DIRECTION('',(-1.,4.669739647545E-16,0.));+#3053 = PCURVE('',#642,#3054);+#3054 = DEFINITIONAL_REPRESENTATION('',(#3055),#3059);+#3055 = LINE('',#3056,#3057);+#3056 = CARTESIAN_POINT('',(0.,0.));+#3057 = VECTOR('',#3058,1.);+#3058 = DIRECTION('',(1.,0.));+#3059 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3060 = PCURVE('',#3061,#3066);+#3061 = PLANE('',#3062);+#3062 = AXIS2_PLACEMENT_3D('',#3063,#3064,#3065);+#3063 = CARTESIAN_POINT('',(-1.324839749899,4.996003610813E-16,0.));+#3064 = DIRECTION('',(0.,0.,1.));+#3065 = DIRECTION('',(-4.669739647545E-16,-1.,0.));+#3066 = DEFINITIONAL_REPRESENTATION('',(#3067),#3071);+#3067 = LINE('',#3068,#3069);+#3068 = CARTESIAN_POINT('',(-0.125,9.9839749899E-02));+#3069 = VECTOR('',#3070,1.);+#3070 = DIRECTION('',(0.,-1.));+#3071 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3072 = ORIENTED_EDGE('',*,*,#3073,.T.);+#3073 = EDGE_CURVE('',#3044,#627,#3074,.T.);+#3074 = SURFACE_CURVE('',#3075,(#3079,#3086),.PCURVE_S1.);+#3075 = LINE('',#3076,#3077);+#3076 = CARTESIAN_POINT('',(-1.225,0.125,0.));+#3077 = VECTOR('',#3078,1.);+#3078 = DIRECTION('',(0.,0.,1.));+#3079 = PCURVE('',#642,#3080);+#3080 = DEFINITIONAL_REPRESENTATION('',(#3081),#3085);+#3081 = LINE('',#3082,#3083);+#3082 = CARTESIAN_POINT('',(0.,0.));+#3083 = VECTOR('',#3084,1.);+#3084 = DIRECTION('',(0.,-1.));+#3085 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3086 = PCURVE('',#675,#3087);+#3087 = DEFINITIONAL_REPRESENTATION('',(#3088),#3092);+#3088 = LINE('',#3089,#3090);+#3089 = CARTESIAN_POINT('',(3.14159265359,0.));+#3090 = VECTOR('',#3091,1.);+#3091 = DIRECTION('',(-0.,-1.));+#3092 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3093 = ORIENTED_EDGE('',*,*,#626,.F.);+#3094 = ORIENTED_EDGE('',*,*,#2417,.F.);+#3095 = ORIENTED_EDGE('',*,*,#3096,.T.);+#3096 = EDGE_CURVE('',#2390,#3097,#3099,.T.);+#3097 = VERTEX_POINT('',#3098);+#3098 = CARTESIAN_POINT('',(-1.5,0.125,0.2));+#3099 = SURFACE_CURVE('',#3100,(#3104,#3111),.PCURVE_S1.);+#3100 = LINE('',#3101,#3102);+#3101 = CARTESIAN_POINT('',(-1.225,0.125,0.2));+#3102 = VECTOR('',#3103,1.);+#3103 = DIRECTION('',(-1.,4.669739647545E-16,0.));+#3104 = PCURVE('',#642,#3105);+#3105 = DEFINITIONAL_REPRESENTATION('',(#3106),#3110);+#3106 = LINE('',#3107,#3108);+#3107 = CARTESIAN_POINT('',(0.,-0.2));+#3108 = VECTOR('',#3109,1.);+#3109 = DIRECTION('',(1.,0.));+#3110 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3111 = PCURVE('',#2405,#3112);+#3112 = DEFINITIONAL_REPRESENTATION('',(#3113),#3117);+#3113 = LINE('',#3114,#3115);+#3114 = CARTESIAN_POINT('',(-0.125,9.9839749899E-02));+#3115 = VECTOR('',#3116,1.);+#3116 = DIRECTION('',(0.,-1.));+#3117 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3118 = ORIENTED_EDGE('',*,*,#3119,.F.);+#3119 = EDGE_CURVE('',#3046,#3097,#3120,.T.);+#3120 = SURFACE_CURVE('',#3121,(#3125,#3132),.PCURVE_S1.);+#3121 = LINE('',#3122,#3123);+#3122 = CARTESIAN_POINT('',(-1.5,0.125,0.));+#3123 = VECTOR('',#3124,1.);+#3124 = DIRECTION('',(0.,0.,1.));+#3125 = PCURVE('',#642,#3126);+#3126 = DEFINITIONAL_REPRESENTATION('',(#3127),#3131);+#3127 = LINE('',#3128,#3129);+#3128 = CARTESIAN_POINT('',(0.275,0.));+#3129 = VECTOR('',#3130,1.);+#3130 = DIRECTION('',(0.,-1.));+#3131 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3132 = PCURVE('',#3133,#3138);+#3133 = PLANE('',#3134);+#3134 = AXIS2_PLACEMENT_3D('',#3135,#3136,#3137);+#3135 = CARTESIAN_POINT('',(-1.5,0.125,0.));+#3136 = DIRECTION('',(1.,-4.669739647545E-16,0.));+#3137 = DIRECTION('',(-4.669739647545E-16,-1.,0.));+#3138 = DEFINITIONAL_REPRESENTATION('',(#3139),#3143);+#3139 = LINE('',#3140,#3141);+#3140 = CARTESIAN_POINT('',(0.,0.));+#3141 = VECTOR('',#3142,1.);+#3142 = DIRECTION('',(0.,-1.));+#3143 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3144 = ADVANCED_FACE('',(#3145),#675,.T.);+#3145 = FACE_BOUND('',#3146,.T.);+#3146 = EDGE_LOOP('',(#3147,#3148,#3149,#3172));+#3147 = ORIENTED_EDGE('',*,*,#3073,.T.);+#3148 = ORIENTED_EDGE('',*,*,#654,.T.);+#3149 = ORIENTED_EDGE('',*,*,#3150,.F.);+#3150 = EDGE_CURVE('',#3151,#655,#3153,.T.);+#3151 = VERTEX_POINT('',#3152);+#3152 = CARTESIAN_POINT('',(-1.225,-0.125,0.));+#3153 = SURFACE_CURVE('',#3154,(#3158,#3165),.PCURVE_S1.);+#3154 = LINE('',#3155,#3156);+#3155 = CARTESIAN_POINT('',(-1.225,-0.125,0.));+#3156 = VECTOR('',#3157,1.);+#3157 = DIRECTION('',(0.,0.,1.));+#3158 = PCURVE('',#675,#3159);+#3159 = DEFINITIONAL_REPRESENTATION('',(#3160),#3164);+#3160 = LINE('',#3161,#3162);+#3161 = CARTESIAN_POINT('',(6.28318530718,0.));+#3162 = VECTOR('',#3163,1.);+#3163 = DIRECTION('',(-0.,-1.));+#3164 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3165 = PCURVE('',#703,#3166);+#3166 = DEFINITIONAL_REPRESENTATION('',(#3167),#3171);+#3167 = LINE('',#3168,#3169);+#3168 = CARTESIAN_POINT('',(0.275,0.));+#3169 = VECTOR('',#3170,1.);+#3170 = DIRECTION('',(0.,-1.));+#3171 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3172 = ORIENTED_EDGE('',*,*,#3173,.T.);+#3173 = EDGE_CURVE('',#3151,#3044,#3174,.T.);+#3174 = SURFACE_CURVE('',#3175,(#3180,#3187),.PCURVE_S1.);+#3175 = CIRCLE('',#3176,0.125);+#3176 = AXIS2_PLACEMENT_3D('',#3177,#3178,#3179);+#3177 = CARTESIAN_POINT('',(-1.225,4.440892098501E-16,0.));+#3178 = DIRECTION('',(0.,0.,1.));+#3179 = DIRECTION('',(-4.669739647545E-16,-1.,0.));+#3180 = PCURVE('',#675,#3181);+#3181 = DEFINITIONAL_REPRESENTATION('',(#3182),#3186);+#3182 = LINE('',#3183,#3184);+#3183 = CARTESIAN_POINT('',(6.28318530718,0.));+#3184 = VECTOR('',#3185,1.);+#3185 = DIRECTION('',(-1.,0.));+#3186 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3187 = PCURVE('',#3061,#3188);+#3188 = DEFINITIONAL_REPRESENTATION('',(#3189),#3193);+#3189 = CIRCLE('',#3190,0.125);+#3190 = AXIS2_PLACEMENT_2D('',#3191,#3192);+#3191 = CARTESIAN_POINT('',(8.888587380766E-18,9.9839749899E-02));+#3192 = DIRECTION('',(1.,0.));+#3193 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3194 = ADVANCED_FACE('',(#3195),#703,.F.);+#3195 = FACE_BOUND('',#3196,.F.);+#3196 = EDGE_LOOP('',(#3197,#3220,#3243,#3264,#3265,#3266));+#3197 = ORIENTED_EDGE('',*,*,#3198,.F.);+#3198 = EDGE_CURVE('',#3199,#3151,#3201,.T.);+#3199 = VERTEX_POINT('',#3200);+#3200 = CARTESIAN_POINT('',(-1.5,-0.125,0.));+#3201 = SURFACE_CURVE('',#3202,(#3206,#3213),.PCURVE_S1.);+#3202 = LINE('',#3203,#3204);+#3203 = CARTESIAN_POINT('',(-1.5,-0.125,0.));+#3204 = VECTOR('',#3205,1.);+#3205 = DIRECTION('',(1.,-4.669739647545E-16,0.));+#3206 = PCURVE('',#703,#3207);+#3207 = DEFINITIONAL_REPRESENTATION('',(#3208),#3212);+#3208 = LINE('',#3209,#3210);+#3209 = CARTESIAN_POINT('',(0.,0.));+#3210 = VECTOR('',#3211,1.);+#3211 = DIRECTION('',(1.,0.));+#3212 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3213 = PCURVE('',#3061,#3214);+#3214 = DEFINITIONAL_REPRESENTATION('',(#3215),#3219);+#3215 = LINE('',#3216,#3217);+#3216 = CARTESIAN_POINT('',(0.125,-0.175160250101));+#3217 = VECTOR('',#3218,1.);+#3218 = DIRECTION('',(0.,1.));+#3219 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3220 = ORIENTED_EDGE('',*,*,#3221,.T.);+#3221 = EDGE_CURVE('',#3199,#3222,#3224,.T.);+#3222 = VERTEX_POINT('',#3223);+#3223 = CARTESIAN_POINT('',(-1.5,-0.125,0.2));+#3224 = SURFACE_CURVE('',#3225,(#3229,#3236),.PCURVE_S1.);+#3225 = LINE('',#3226,#3227);+#3226 = CARTESIAN_POINT('',(-1.5,-0.125,0.));+#3227 = VECTOR('',#3228,1.);+#3228 = DIRECTION('',(0.,0.,1.));+#3229 = PCURVE('',#703,#3230);+#3230 = DEFINITIONAL_REPRESENTATION('',(#3231),#3235);+#3231 = LINE('',#3232,#3233);+#3232 = CARTESIAN_POINT('',(0.,0.));+#3233 = VECTOR('',#3234,1.);+#3234 = DIRECTION('',(0.,-1.));+#3235 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3236 = PCURVE('',#3133,#3237);+#3237 = DEFINITIONAL_REPRESENTATION('',(#3238),#3242);+#3238 = LINE('',#3239,#3240);+#3239 = CARTESIAN_POINT('',(0.25,0.));+#3240 = VECTOR('',#3241,1.);+#3241 = DIRECTION('',(0.,-1.));+#3242 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3243 = ORIENTED_EDGE('',*,*,#3244,.T.);+#3244 = EDGE_CURVE('',#3222,#2367,#3245,.T.);+#3245 = SURFACE_CURVE('',#3246,(#3250,#3257),.PCURVE_S1.);+#3246 = LINE('',#3247,#3248);+#3247 = CARTESIAN_POINT('',(-1.5,-0.125,0.2));+#3248 = VECTOR('',#3249,1.);+#3249 = DIRECTION('',(1.,-4.669739647545E-16,0.));+#3250 = PCURVE('',#703,#3251);+#3251 = DEFINITIONAL_REPRESENTATION('',(#3252),#3256);+#3252 = LINE('',#3253,#3254);+#3253 = CARTESIAN_POINT('',(0.,-0.2));+#3254 = VECTOR('',#3255,1.);+#3255 = DIRECTION('',(1.,0.));+#3256 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3257 = PCURVE('',#2405,#3258);+#3258 = DEFINITIONAL_REPRESENTATION('',(#3259),#3263);+#3259 = LINE('',#3260,#3261);+#3260 = CARTESIAN_POINT('',(0.125,-0.175160250101));+#3261 = VECTOR('',#3262,1.);+#3262 = DIRECTION('',(0.,1.));+#3263 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3264 = ORIENTED_EDGE('',*,*,#2366,.F.);+#3265 = ORIENTED_EDGE('',*,*,#687,.F.);+#3266 = ORIENTED_EDGE('',*,*,#3150,.F.);+#3267 = ADVANCED_FACE('',(#3268),#754,.F.);+#3268 = FACE_BOUND('',#3269,.F.);+#3269 = EDGE_LOOP('',(#3270,#3300,#3321,#3322,#3323,#3346));+#3270 = ORIENTED_EDGE('',*,*,#3271,.F.);+#3271 = EDGE_CURVE('',#3272,#3274,#3276,.T.);+#3272 = VERTEX_POINT('',#3273);+#3273 = CARTESIAN_POINT('',(-1.225,-0.375,0.));+#3274 = VERTEX_POINT('',#3275);+#3275 = CARTESIAN_POINT('',(-1.5,-0.375,0.));+#3276 = SURFACE_CURVE('',#3277,(#3281,#3288),.PCURVE_S1.);+#3277 = LINE('',#3278,#3279);+#3278 = CARTESIAN_POINT('',(-1.225,-0.375,0.));+#3279 = VECTOR('',#3280,1.);+#3280 = DIRECTION('',(-1.,4.669739647545E-16,0.));+#3281 = PCURVE('',#754,#3282);+#3282 = DEFINITIONAL_REPRESENTATION('',(#3283),#3287);+#3283 = LINE('',#3284,#3285);+#3284 = CARTESIAN_POINT('',(0.,0.));+#3285 = VECTOR('',#3286,1.);+#3286 = DIRECTION('',(1.,0.));+#3287 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3288 = PCURVE('',#3289,#3294);+#3289 = PLANE('',#3290);+#3290 = AXIS2_PLACEMENT_3D('',#3291,#3292,#3293);+#3291 = CARTESIAN_POINT('',(-1.324839749899,-0.5,0.));+#3292 = DIRECTION('',(0.,0.,1.));+#3293 = DIRECTION('',(-4.669739647545E-16,-1.,0.));+#3294 = DEFINITIONAL_REPRESENTATION('',(#3295),#3299);+#3295 = LINE('',#3296,#3297);+#3296 = CARTESIAN_POINT('',(-0.125,9.9839749899E-02));+#3297 = VECTOR('',#3298,1.);+#3298 = DIRECTION('',(0.,-1.));+#3299 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3300 = ORIENTED_EDGE('',*,*,#3301,.T.);+#3301 = EDGE_CURVE('',#3272,#739,#3302,.T.);+#3302 = SURFACE_CURVE('',#3303,(#3307,#3314),.PCURVE_S1.);+#3303 = LINE('',#3304,#3305);+#3304 = CARTESIAN_POINT('',(-1.225,-0.375,0.));+#3305 = VECTOR('',#3306,1.);+#3306 = DIRECTION('',(0.,0.,1.));+#3307 = PCURVE('',#754,#3308);+#3308 = DEFINITIONAL_REPRESENTATION('',(#3309),#3313);+#3309 = LINE('',#3310,#3311);+#3310 = CARTESIAN_POINT('',(0.,0.));+#3311 = VECTOR('',#3312,1.);+#3312 = DIRECTION('',(0.,-1.));+#3313 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3314 = PCURVE('',#787,#3315);+#3315 = DEFINITIONAL_REPRESENTATION('',(#3316),#3320);+#3316 = LINE('',#3317,#3318);+#3317 = CARTESIAN_POINT('',(3.14159265359,0.));+#3318 = VECTOR('',#3319,1.);+#3319 = DIRECTION('',(-0.,-1.));+#3320 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3321 = ORIENTED_EDGE('',*,*,#738,.F.);+#3322 = ORIENTED_EDGE('',*,*,#2344,.F.);+#3323 = ORIENTED_EDGE('',*,*,#3324,.T.);+#3324 = EDGE_CURVE('',#2317,#3325,#3327,.T.);+#3325 = VERTEX_POINT('',#3326);+#3326 = CARTESIAN_POINT('',(-1.5,-0.375,0.2));+#3327 = SURFACE_CURVE('',#3328,(#3332,#3339),.PCURVE_S1.);+#3328 = LINE('',#3329,#3330);+#3329 = CARTESIAN_POINT('',(-1.225,-0.375,0.2));+#3330 = VECTOR('',#3331,1.);+#3331 = DIRECTION('',(-1.,4.669739647545E-16,0.));+#3332 = PCURVE('',#754,#3333);+#3333 = DEFINITIONAL_REPRESENTATION('',(#3334),#3338);+#3334 = LINE('',#3335,#3336);+#3335 = CARTESIAN_POINT('',(0.,-0.2));+#3336 = VECTOR('',#3337,1.);+#3337 = DIRECTION('',(1.,0.));+#3338 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3339 = PCURVE('',#2332,#3340);+#3340 = DEFINITIONAL_REPRESENTATION('',(#3341),#3345);+#3341 = LINE('',#3342,#3343);+#3342 = CARTESIAN_POINT('',(-0.125,9.9839749899E-02));+#3343 = VECTOR('',#3344,1.);+#3344 = DIRECTION('',(0.,-1.));+#3345 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3346 = ORIENTED_EDGE('',*,*,#3347,.F.);+#3347 = EDGE_CURVE('',#3274,#3325,#3348,.T.);+#3348 = SURFACE_CURVE('',#3349,(#3353,#3360),.PCURVE_S1.);+#3349 = LINE('',#3350,#3351);+#3350 = CARTESIAN_POINT('',(-1.5,-0.375,0.));+#3351 = VECTOR('',#3352,1.);+#3352 = DIRECTION('',(0.,0.,1.));+#3353 = PCURVE('',#754,#3354);+#3354 = DEFINITIONAL_REPRESENTATION('',(#3355),#3359);+#3355 = LINE('',#3356,#3357);+#3356 = CARTESIAN_POINT('',(0.275,0.));+#3357 = VECTOR('',#3358,1.);+#3358 = DIRECTION('',(0.,-1.));+#3359 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3360 = PCURVE('',#3361,#3366);+#3361 = PLANE('',#3362);+#3362 = AXIS2_PLACEMENT_3D('',#3363,#3364,#3365);+#3363 = CARTESIAN_POINT('',(-1.5,-0.375,0.));+#3364 = DIRECTION('',(1.,-4.669739647545E-16,0.));+#3365 = DIRECTION('',(-4.669739647545E-16,-1.,0.));+#3366 = DEFINITIONAL_REPRESENTATION('',(#3367),#3371);+#3367 = LINE('',#3368,#3369);+#3368 = CARTESIAN_POINT('',(0.,0.));+#3369 = VECTOR('',#3370,1.);+#3370 = DIRECTION('',(0.,-1.));+#3371 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3372 = ADVANCED_FACE('',(#3373),#787,.T.);+#3373 = FACE_BOUND('',#3374,.T.);+#3374 = EDGE_LOOP('',(#3375,#3376,#3377,#3400));+#3375 = ORIENTED_EDGE('',*,*,#3301,.T.);+#3376 = ORIENTED_EDGE('',*,*,#766,.T.);+#3377 = ORIENTED_EDGE('',*,*,#3378,.F.);+#3378 = EDGE_CURVE('',#3379,#767,#3381,.T.);+#3379 = VERTEX_POINT('',#3380);+#3380 = CARTESIAN_POINT('',(-1.225,-0.625,0.));+#3381 = SURFACE_CURVE('',#3382,(#3386,#3393),.PCURVE_S1.);+#3382 = LINE('',#3383,#3384);+#3383 = CARTESIAN_POINT('',(-1.225,-0.625,0.));+#3384 = VECTOR('',#3385,1.);+#3385 = DIRECTION('',(0.,0.,1.));+#3386 = PCURVE('',#787,#3387);+#3387 = DEFINITIONAL_REPRESENTATION('',(#3388),#3392);+#3388 = LINE('',#3389,#3390);+#3389 = CARTESIAN_POINT('',(6.28318530718,0.));+#3390 = VECTOR('',#3391,1.);+#3391 = DIRECTION('',(-0.,-1.));+#3392 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3393 = PCURVE('',#815,#3394);+#3394 = DEFINITIONAL_REPRESENTATION('',(#3395),#3399);+#3395 = LINE('',#3396,#3397);+#3396 = CARTESIAN_POINT('',(0.275,0.));+#3397 = VECTOR('',#3398,1.);+#3398 = DIRECTION('',(0.,-1.));+#3399 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3400 = ORIENTED_EDGE('',*,*,#3401,.T.);+#3401 = EDGE_CURVE('',#3379,#3272,#3402,.T.);+#3402 = SURFACE_CURVE('',#3403,(#3408,#3415),.PCURVE_S1.);+#3403 = CIRCLE('',#3404,0.125);+#3404 = AXIS2_PLACEMENT_3D('',#3405,#3406,#3407);+#3405 = CARTESIAN_POINT('',(-1.225,-0.5,0.));+#3406 = DIRECTION('',(0.,0.,1.));+#3407 = DIRECTION('',(-4.669739647545E-16,-1.,0.));+#3408 = PCURVE('',#787,#3409);+#3409 = DEFINITIONAL_REPRESENTATION('',(#3410),#3414);+#3410 = LINE('',#3411,#3412);+#3411 = CARTESIAN_POINT('',(6.28318530718,0.));+#3412 = VECTOR('',#3413,1.);+#3413 = DIRECTION('',(-1.,0.));+#3414 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3415 = PCURVE('',#3289,#3416);+#3416 = DEFINITIONAL_REPRESENTATION('',(#3417),#3421);+#3417 = CIRCLE('',#3418,0.125);+#3418 = AXIS2_PLACEMENT_2D('',#3419,#3420);+#3419 = CARTESIAN_POINT('',(-4.662256385043E-17,9.9839749899E-02));+#3420 = DIRECTION('',(1.,0.));+#3421 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3422 = ADVANCED_FACE('',(#3423),#815,.F.);+#3423 = FACE_BOUND('',#3424,.F.);+#3424 = EDGE_LOOP('',(#3425,#3448,#3471,#3492,#3493,#3494));+#3425 = ORIENTED_EDGE('',*,*,#3426,.F.);+#3426 = EDGE_CURVE('',#3427,#3379,#3429,.T.);+#3427 = VERTEX_POINT('',#3428);+#3428 = CARTESIAN_POINT('',(-1.5,-0.625,0.));+#3429 = SURFACE_CURVE('',#3430,(#3434,#3441),.PCURVE_S1.);+#3430 = LINE('',#3431,#3432);+#3431 = CARTESIAN_POINT('',(-1.5,-0.625,0.));+#3432 = VECTOR('',#3433,1.);+#3433 = DIRECTION('',(1.,-4.669739647545E-16,0.));+#3434 = PCURVE('',#815,#3435);+#3435 = DEFINITIONAL_REPRESENTATION('',(#3436),#3440);+#3436 = LINE('',#3437,#3438);+#3437 = CARTESIAN_POINT('',(0.,0.));+#3438 = VECTOR('',#3439,1.);+#3439 = DIRECTION('',(1.,0.));+#3440 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3441 = PCURVE('',#3289,#3442);+#3442 = DEFINITIONAL_REPRESENTATION('',(#3443),#3447);+#3443 = LINE('',#3444,#3445);+#3444 = CARTESIAN_POINT('',(0.125,-0.175160250101));+#3445 = VECTOR('',#3446,1.);+#3446 = DIRECTION('',(0.,1.));+#3447 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3448 = ORIENTED_EDGE('',*,*,#3449,.T.);+#3449 = EDGE_CURVE('',#3427,#3450,#3452,.T.);+#3450 = VERTEX_POINT('',#3451);+#3451 = CARTESIAN_POINT('',(-1.5,-0.625,0.2));+#3452 = SURFACE_CURVE('',#3453,(#3457,#3464),.PCURVE_S1.);+#3453 = LINE('',#3454,#3455);+#3454 = CARTESIAN_POINT('',(-1.5,-0.625,0.));+#3455 = VECTOR('',#3456,1.);+#3456 = DIRECTION('',(0.,0.,1.));+#3457 = PCURVE('',#815,#3458);+#3458 = DEFINITIONAL_REPRESENTATION('',(#3459),#3463);+#3459 = LINE('',#3460,#3461);+#3460 = CARTESIAN_POINT('',(0.,0.));+#3461 = VECTOR('',#3462,1.);+#3462 = DIRECTION('',(0.,-1.));+#3463 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3464 = PCURVE('',#3361,#3465);+#3465 = DEFINITIONAL_REPRESENTATION('',(#3466),#3470);+#3466 = LINE('',#3467,#3468);+#3467 = CARTESIAN_POINT('',(0.25,0.));+#3468 = VECTOR('',#3469,1.);+#3469 = DIRECTION('',(0.,-1.));+#3470 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3471 = ORIENTED_EDGE('',*,*,#3472,.T.);+#3472 = EDGE_CURVE('',#3450,#2294,#3473,.T.);+#3473 = SURFACE_CURVE('',#3474,(#3478,#3485),.PCURVE_S1.);+#3474 = LINE('',#3475,#3476);+#3475 = CARTESIAN_POINT('',(-1.5,-0.625,0.2));+#3476 = VECTOR('',#3477,1.);+#3477 = DIRECTION('',(1.,-4.669739647545E-16,0.));+#3478 = PCURVE('',#815,#3479);+#3479 = DEFINITIONAL_REPRESENTATION('',(#3480),#3484);+#3480 = LINE('',#3481,#3482);+#3481 = CARTESIAN_POINT('',(0.,-0.2));+#3482 = VECTOR('',#3483,1.);+#3483 = DIRECTION('',(1.,0.));+#3484 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3485 = PCURVE('',#2332,#3486);+#3486 = DEFINITIONAL_REPRESENTATION('',(#3487),#3491);+#3487 = LINE('',#3488,#3489);+#3488 = CARTESIAN_POINT('',(0.125,-0.175160250101));+#3489 = VECTOR('',#3490,1.);+#3490 = DIRECTION('',(0.,1.));+#3491 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3492 = ORIENTED_EDGE('',*,*,#2293,.F.);+#3493 = ORIENTED_EDGE('',*,*,#799,.F.);+#3494 = ORIENTED_EDGE('',*,*,#3378,.F.);+#3495 = ADVANCED_FACE('',(#3496),#866,.F.);+#3496 = FACE_BOUND('',#3497,.F.);+#3497 = EDGE_LOOP('',(#3498,#3528,#3549,#3550,#3551,#3574));+#3498 = ORIENTED_EDGE('',*,*,#3499,.F.);+#3499 = EDGE_CURVE('',#3500,#3502,#3504,.T.);+#3500 = VERTEX_POINT('',#3501);+#3501 = CARTESIAN_POINT('',(-1.225,-0.875,0.));+#3502 = VERTEX_POINT('',#3503);+#3503 = CARTESIAN_POINT('',(-1.5,-0.875,0.));+#3504 = SURFACE_CURVE('',#3505,(#3509,#3516),.PCURVE_S1.);+#3505 = LINE('',#3506,#3507);+#3506 = CARTESIAN_POINT('',(-1.225,-0.875,0.));+#3507 = VECTOR('',#3508,1.);+#3508 = DIRECTION('',(-1.,4.669739647545E-16,0.));+#3509 = PCURVE('',#866,#3510);+#3510 = DEFINITIONAL_REPRESENTATION('',(#3511),#3515);+#3511 = LINE('',#3512,#3513);+#3512 = CARTESIAN_POINT('',(0.,0.));+#3513 = VECTOR('',#3514,1.);+#3514 = DIRECTION('',(1.,0.));+#3515 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3516 = PCURVE('',#3517,#3522);+#3517 = PLANE('',#3518);+#3518 = AXIS2_PLACEMENT_3D('',#3519,#3520,#3521);+#3519 = CARTESIAN_POINT('',(-1.324839749899,-1.,0.));+#3520 = DIRECTION('',(0.,0.,1.));+#3521 = DIRECTION('',(-4.669739647545E-16,-1.,0.));+#3522 = DEFINITIONAL_REPRESENTATION('',(#3523),#3527);+#3523 = LINE('',#3524,#3525);+#3524 = CARTESIAN_POINT('',(-0.125,9.9839749899E-02));+#3525 = VECTOR('',#3526,1.);+#3526 = DIRECTION('',(0.,-1.));+#3527 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3528 = ORIENTED_EDGE('',*,*,#3529,.T.);+#3529 = EDGE_CURVE('',#3500,#851,#3530,.T.);+#3530 = SURFACE_CURVE('',#3531,(#3535,#3542),.PCURVE_S1.);+#3531 = LINE('',#3532,#3533);+#3532 = CARTESIAN_POINT('',(-1.225,-0.875,0.));+#3533 = VECTOR('',#3534,1.);+#3534 = DIRECTION('',(0.,0.,1.));+#3535 = PCURVE('',#866,#3536);+#3536 = DEFINITIONAL_REPRESENTATION('',(#3537),#3541);+#3537 = LINE('',#3538,#3539);+#3538 = CARTESIAN_POINT('',(0.,0.));+#3539 = VECTOR('',#3540,1.);+#3540 = DIRECTION('',(0.,-1.));+#3541 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3542 = PCURVE('',#899,#3543);+#3543 = DEFINITIONAL_REPRESENTATION('',(#3544),#3548);+#3544 = LINE('',#3545,#3546);+#3545 = CARTESIAN_POINT('',(3.14159265359,0.));+#3546 = VECTOR('',#3547,1.);+#3547 = DIRECTION('',(-0.,-1.));+#3548 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3549 = ORIENTED_EDGE('',*,*,#850,.F.);+#3550 = ORIENTED_EDGE('',*,*,#2271,.F.);+#3551 = ORIENTED_EDGE('',*,*,#3552,.T.);+#3552 = EDGE_CURVE('',#2244,#3553,#3555,.T.);+#3553 = VERTEX_POINT('',#3554);+#3554 = CARTESIAN_POINT('',(-1.5,-0.875,0.2));+#3555 = SURFACE_CURVE('',#3556,(#3560,#3567),.PCURVE_S1.);+#3556 = LINE('',#3557,#3558);+#3557 = CARTESIAN_POINT('',(-1.225,-0.875,0.2));+#3558 = VECTOR('',#3559,1.);+#3559 = DIRECTION('',(-1.,4.669739647545E-16,0.));+#3560 = PCURVE('',#866,#3561);+#3561 = DEFINITIONAL_REPRESENTATION('',(#3562),#3566);+#3562 = LINE('',#3563,#3564);+#3563 = CARTESIAN_POINT('',(0.,-0.2));+#3564 = VECTOR('',#3565,1.);+#3565 = DIRECTION('',(1.,0.));+#3566 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3567 = PCURVE('',#2259,#3568);+#3568 = DEFINITIONAL_REPRESENTATION('',(#3569),#3573);+#3569 = LINE('',#3570,#3571);+#3570 = CARTESIAN_POINT('',(-0.125,9.9839749899E-02));+#3571 = VECTOR('',#3572,1.);+#3572 = DIRECTION('',(0.,-1.));+#3573 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3574 = ORIENTED_EDGE('',*,*,#3575,.F.);+#3575 = EDGE_CURVE('',#3502,#3553,#3576,.T.);+#3576 = SURFACE_CURVE('',#3577,(#3581,#3588),.PCURVE_S1.);+#3577 = LINE('',#3578,#3579);+#3578 = CARTESIAN_POINT('',(-1.5,-0.875,0.));+#3579 = VECTOR('',#3580,1.);+#3580 = DIRECTION('',(0.,0.,1.));+#3581 = PCURVE('',#866,#3582);+#3582 = DEFINITIONAL_REPRESENTATION('',(#3583),#3587);+#3583 = LINE('',#3584,#3585);+#3584 = CARTESIAN_POINT('',(0.275,0.));+#3585 = VECTOR('',#3586,1.);+#3586 = DIRECTION('',(0.,-1.));+#3587 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3588 = PCURVE('',#3589,#3594);+#3589 = PLANE('',#3590);+#3590 = AXIS2_PLACEMENT_3D('',#3591,#3592,#3593);+#3591 = CARTESIAN_POINT('',(-1.5,-0.875,0.));+#3592 = DIRECTION('',(1.,-4.669739647545E-16,0.));+#3593 = DIRECTION('',(-4.669739647545E-16,-1.,0.));+#3594 = DEFINITIONAL_REPRESENTATION('',(#3595),#3599);+#3595 = LINE('',#3596,#3597);+#3596 = CARTESIAN_POINT('',(0.,0.));+#3597 = VECTOR('',#3598,1.);+#3598 = DIRECTION('',(0.,-1.));+#3599 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3600 = ADVANCED_FACE('',(#3601),#899,.T.);+#3601 = FACE_BOUND('',#3602,.T.);+#3602 = EDGE_LOOP('',(#3603,#3604,#3605,#3628));+#3603 = ORIENTED_EDGE('',*,*,#3529,.T.);+#3604 = ORIENTED_EDGE('',*,*,#878,.T.);+#3605 = ORIENTED_EDGE('',*,*,#3606,.F.);+#3606 = EDGE_CURVE('',#3607,#879,#3609,.T.);+#3607 = VERTEX_POINT('',#3608);+#3608 = CARTESIAN_POINT('',(-1.225,-1.125,0.));+#3609 = SURFACE_CURVE('',#3610,(#3614,#3621),.PCURVE_S1.);+#3610 = LINE('',#3611,#3612);+#3611 = CARTESIAN_POINT('',(-1.225,-1.125,0.));+#3612 = VECTOR('',#3613,1.);+#3613 = DIRECTION('',(0.,0.,1.));+#3614 = PCURVE('',#899,#3615);+#3615 = DEFINITIONAL_REPRESENTATION('',(#3616),#3620);+#3616 = LINE('',#3617,#3618);+#3617 = CARTESIAN_POINT('',(6.28318530718,0.));+#3618 = VECTOR('',#3619,1.);+#3619 = DIRECTION('',(-0.,-1.));+#3620 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3621 = PCURVE('',#927,#3622);+#3622 = DEFINITIONAL_REPRESENTATION('',(#3623),#3627);+#3623 = LINE('',#3624,#3625);+#3624 = CARTESIAN_POINT('',(0.275,0.));+#3625 = VECTOR('',#3626,1.);+#3626 = DIRECTION('',(0.,-1.));+#3627 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3628 = ORIENTED_EDGE('',*,*,#3629,.T.);+#3629 = EDGE_CURVE('',#3607,#3500,#3630,.T.);+#3630 = SURFACE_CURVE('',#3631,(#3636,#3643),.PCURVE_S1.);+#3631 = CIRCLE('',#3632,0.125);+#3632 = AXIS2_PLACEMENT_3D('',#3633,#3634,#3635);+#3633 = CARTESIAN_POINT('',(-1.225,-1.,0.));+#3634 = DIRECTION('',(0.,0.,1.));+#3635 = DIRECTION('',(-4.669739647545E-16,-1.,0.));+#3636 = PCURVE('',#899,#3637);+#3637 = DEFINITIONAL_REPRESENTATION('',(#3638),#3642);+#3638 = LINE('',#3639,#3640);+#3639 = CARTESIAN_POINT('',(6.28318530718,0.));+#3640 = VECTOR('',#3641,1.);+#3641 = DIRECTION('',(-1.,0.));+#3642 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3643 = PCURVE('',#3517,#3644);+#3644 = DEFINITIONAL_REPRESENTATION('',(#3645),#3649);+#3645 = CIRCLE('',#3646,0.125);+#3646 = AXIS2_PLACEMENT_2D('',#3647,#3648);+#3647 = CARTESIAN_POINT('',(-4.662256385043E-17,9.9839749899E-02));+#3648 = DIRECTION('',(1.,0.));+#3649 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3650 = ADVANCED_FACE('',(#3651),#927,.F.);+#3651 = FACE_BOUND('',#3652,.F.);+#3652 = EDGE_LOOP('',(#3653,#3676,#3699,#3720,#3721,#3722));+#3653 = ORIENTED_EDGE('',*,*,#3654,.F.);+#3654 = EDGE_CURVE('',#3655,#3607,#3657,.T.);+#3655 = VERTEX_POINT('',#3656);+#3656 = CARTESIAN_POINT('',(-1.5,-1.125,0.));+#3657 = SURFACE_CURVE('',#3658,(#3662,#3669),.PCURVE_S1.);+#3658 = LINE('',#3659,#3660);+#3659 = CARTESIAN_POINT('',(-1.5,-1.125,0.));+#3660 = VECTOR('',#3661,1.);+#3661 = DIRECTION('',(1.,-4.669739647545E-16,0.));+#3662 = PCURVE('',#927,#3663);+#3663 = DEFINITIONAL_REPRESENTATION('',(#3664),#3668);+#3664 = LINE('',#3665,#3666);+#3665 = CARTESIAN_POINT('',(0.,0.));+#3666 = VECTOR('',#3667,1.);+#3667 = DIRECTION('',(1.,0.));+#3668 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3669 = PCURVE('',#3517,#3670);+#3670 = DEFINITIONAL_REPRESENTATION('',(#3671),#3675);+#3671 = LINE('',#3672,#3673);+#3672 = CARTESIAN_POINT('',(0.125,-0.175160250101));+#3673 = VECTOR('',#3674,1.);+#3674 = DIRECTION('',(0.,1.));+#3675 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3676 = ORIENTED_EDGE('',*,*,#3677,.T.);+#3677 = EDGE_CURVE('',#3655,#3678,#3680,.T.);+#3678 = VERTEX_POINT('',#3679);+#3679 = CARTESIAN_POINT('',(-1.5,-1.125,0.2));+#3680 = SURFACE_CURVE('',#3681,(#3685,#3692),.PCURVE_S1.);+#3681 = LINE('',#3682,#3683);+#3682 = CARTESIAN_POINT('',(-1.5,-1.125,0.));+#3683 = VECTOR('',#3684,1.);+#3684 = DIRECTION('',(0.,0.,1.));+#3685 = PCURVE('',#927,#3686);+#3686 = DEFINITIONAL_REPRESENTATION('',(#3687),#3691);+#3687 = LINE('',#3688,#3689);+#3688 = CARTESIAN_POINT('',(0.,0.));+#3689 = VECTOR('',#3690,1.);+#3690 = DIRECTION('',(0.,-1.));+#3691 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3692 = PCURVE('',#3589,#3693);+#3693 = DEFINITIONAL_REPRESENTATION('',(#3694),#3698);+#3694 = LINE('',#3695,#3696);+#3695 = CARTESIAN_POINT('',(0.25,0.));+#3696 = VECTOR('',#3697,1.);+#3697 = DIRECTION('',(0.,-1.));+#3698 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3699 = ORIENTED_EDGE('',*,*,#3700,.T.);+#3700 = EDGE_CURVE('',#3678,#2221,#3701,.T.);+#3701 = SURFACE_CURVE('',#3702,(#3706,#3713),.PCURVE_S1.);+#3702 = LINE('',#3703,#3704);+#3703 = CARTESIAN_POINT('',(-1.5,-1.125,0.2));+#3704 = VECTOR('',#3705,1.);+#3705 = DIRECTION('',(1.,-4.669739647545E-16,0.));+#3706 = PCURVE('',#927,#3707);+#3707 = DEFINITIONAL_REPRESENTATION('',(#3708),#3712);+#3708 = LINE('',#3709,#3710);+#3709 = CARTESIAN_POINT('',(0.,-0.2));+#3710 = VECTOR('',#3711,1.);+#3711 = DIRECTION('',(1.,0.));+#3712 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3713 = PCURVE('',#2259,#3714);+#3714 = DEFINITIONAL_REPRESENTATION('',(#3715),#3719);+#3715 = LINE('',#3716,#3717);+#3716 = CARTESIAN_POINT('',(0.125,-0.175160250101));+#3717 = VECTOR('',#3718,1.);+#3718 = DIRECTION('',(0.,1.));+#3719 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3720 = ORIENTED_EDGE('',*,*,#2220,.F.);+#3721 = ORIENTED_EDGE('',*,*,#911,.F.);+#3722 = ORIENTED_EDGE('',*,*,#3606,.F.);+#3723 = ADVANCED_FACE('',(#3724),#978,.T.);+#3724 = FACE_BOUND('',#3725,.T.);+#3725 = EDGE_LOOP('',(#3726,#3727,#3728,#3729));+#3726 = ORIENTED_EDGE('',*,*,#2198,.F.);+#3727 = ORIENTED_EDGE('',*,*,#962,.T.);+#3728 = ORIENTED_EDGE('',*,*,#1735,.T.);+#3729 = ORIENTED_EDGE('',*,*,#3730,.F.);+#3730 = EDGE_CURVE('',#2176,#1708,#3731,.T.);+#3731 = SURFACE_CURVE('',#3732,(#3736,#3743),.PCURVE_S1.);+#3732 = LINE('',#3733,#3734);+#3733 = CARTESIAN_POINT('',(-1.49,-1.49,1.02));+#3734 = VECTOR('',#3735,1.);+#3735 = DIRECTION('',(1.,-2.22044604925E-16,0.));+#3736 = PCURVE('',#978,#3737);+#3737 = DEFINITIONAL_REPRESENTATION('',(#3738),#3742);+#3738 = LINE('',#3739,#3740);+#3739 = CARTESIAN_POINT('',(1.,0.));+#3740 = VECTOR('',#3741,1.);+#3741 = DIRECTION('',(0.,-1.));+#3742 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3743 = PCURVE('',#1723,#3744);+#3744 = DEFINITIONAL_REPRESENTATION('',(#3745),#3749);+#3745 = LINE('',#3746,#3747);+#3746 = CARTESIAN_POINT('',(2.98,6.616929226765E-16));+#3747 = VECTOR('',#3748,1.);+#3748 = DIRECTION('',(0.,1.));+#3749 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3750 = ADVANCED_FACE('',(#3751),#1029,.F.);+#3751 = FACE_BOUND('',#3752,.F.);+#3752 = EDGE_LOOP('',(#3753,#3783,#3804,#3805,#3806,#3829));+#3753 = ORIENTED_EDGE('',*,*,#3754,.F.);+#3754 = EDGE_CURVE('',#3755,#3757,#3759,.T.);+#3755 = VERTEX_POINT('',#3756);+#3756 = CARTESIAN_POINT('',(1.225,-1.125,0.));+#3757 = VERTEX_POINT('',#3758);+#3758 = CARTESIAN_POINT('',(1.5,-1.125,0.));+#3759 = SURFACE_CURVE('',#3760,(#3764,#3771),.PCURVE_S1.);+#3760 = LINE('',#3761,#3762);+#3761 = CARTESIAN_POINT('',(1.225,-1.125,0.));+#3762 = VECTOR('',#3763,1.);+#3763 = DIRECTION('',(1.,-3.445092848398E-16,0.));+#3764 = PCURVE('',#1029,#3765);+#3765 = DEFINITIONAL_REPRESENTATION('',(#3766),#3770);+#3766 = LINE('',#3767,#3768);+#3767 = CARTESIAN_POINT('',(0.,0.));+#3768 = VECTOR('',#3769,1.);+#3769 = DIRECTION('',(1.,0.));+#3770 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3771 = PCURVE('',#3772,#3777);+#3772 = PLANE('',#3773);+#3773 = AXIS2_PLACEMENT_3D('',#3774,#3775,#3776);+#3774 = CARTESIAN_POINT('',(1.324839749899,-1.,0.));+#3775 = DIRECTION('',(0.,0.,1.));+#3776 = DIRECTION('',(3.445092848398E-16,1.,-0.));+#3777 = DEFINITIONAL_REPRESENTATION('',(#3778),#3782);+#3778 = LINE('',#3779,#3780);+#3779 = CARTESIAN_POINT('',(-0.125,9.9839749899E-02));+#3780 = VECTOR('',#3781,1.);+#3781 = DIRECTION('',(0.,-1.));+#3782 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3783 = ORIENTED_EDGE('',*,*,#3784,.T.);+#3784 = EDGE_CURVE('',#3755,#1014,#3785,.T.);+#3785 = SURFACE_CURVE('',#3786,(#3790,#3797),.PCURVE_S1.);+#3786 = LINE('',#3787,#3788);+#3787 = CARTESIAN_POINT('',(1.225,-1.125,0.));+#3788 = VECTOR('',#3789,1.);+#3789 = DIRECTION('',(0.,0.,1.));+#3790 = PCURVE('',#1029,#3791);+#3791 = DEFINITIONAL_REPRESENTATION('',(#3792),#3796);+#3792 = LINE('',#3793,#3794);+#3793 = CARTESIAN_POINT('',(0.,0.));+#3794 = VECTOR('',#3795,1.);+#3795 = DIRECTION('',(0.,-1.));+#3796 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3797 = PCURVE('',#1062,#3798);+#3798 = DEFINITIONAL_REPRESENTATION('',(#3799),#3803);+#3799 = LINE('',#3800,#3801);+#3800 = CARTESIAN_POINT('',(3.14159265359,0.));+#3801 = VECTOR('',#3802,1.);+#3802 = DIRECTION('',(-0.,-1.));+#3803 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3804 = ORIENTED_EDGE('',*,*,#1013,.F.);+#3805 = ORIENTED_EDGE('',*,*,#1757,.T.);+#3806 = ORIENTED_EDGE('',*,*,#3807,.T.);+#3807 = EDGE_CURVE('',#1758,#3808,#3810,.T.);+#3808 = VERTEX_POINT('',#3809);+#3809 = CARTESIAN_POINT('',(1.5,-1.125,0.2));+#3810 = SURFACE_CURVE('',#3811,(#3815,#3822),.PCURVE_S1.);+#3811 = LINE('',#3812,#3813);+#3812 = CARTESIAN_POINT('',(1.225,-1.125,0.2));+#3813 = VECTOR('',#3814,1.);+#3814 = DIRECTION('',(1.,-3.445092848398E-16,0.));+#3815 = PCURVE('',#1029,#3816);+#3816 = DEFINITIONAL_REPRESENTATION('',(#3817),#3821);+#3817 = LINE('',#3818,#3819);+#3818 = CARTESIAN_POINT('',(0.,-0.2));+#3819 = VECTOR('',#3820,1.);+#3820 = DIRECTION('',(1.,0.));+#3821 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3822 = PCURVE('',#1796,#3823);+#3823 = DEFINITIONAL_REPRESENTATION('',(#3824),#3828);+#3824 = LINE('',#3825,#3826);+#3825 = CARTESIAN_POINT('',(-0.125,9.9839749899E-02));+#3826 = VECTOR('',#3827,1.);+#3827 = DIRECTION('',(0.,-1.));+#3828 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3829 = ORIENTED_EDGE('',*,*,#3830,.F.);+#3830 = EDGE_CURVE('',#3757,#3808,#3831,.T.);+#3831 = SURFACE_CURVE('',#3832,(#3836,#3843),.PCURVE_S1.);+#3832 = LINE('',#3833,#3834);+#3833 = CARTESIAN_POINT('',(1.5,-1.125,0.));+#3834 = VECTOR('',#3835,1.);+#3835 = DIRECTION('',(0.,0.,1.));+#3836 = PCURVE('',#1029,#3837);+#3837 = DEFINITIONAL_REPRESENTATION('',(#3838),#3842);+#3838 = LINE('',#3839,#3840);+#3839 = CARTESIAN_POINT('',(0.275,0.));+#3840 = VECTOR('',#3841,1.);+#3841 = DIRECTION('',(0.,-1.));+#3842 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3843 = PCURVE('',#3844,#3849);+#3844 = PLANE('',#3845);+#3845 = AXIS2_PLACEMENT_3D('',#3846,#3847,#3848);+#3846 = CARTESIAN_POINT('',(1.5,-1.125,0.));+#3847 = DIRECTION('',(-1.,3.445092848398E-16,0.));+#3848 = DIRECTION('',(3.445092848398E-16,1.,0.));+#3849 = DEFINITIONAL_REPRESENTATION('',(#3850),#3854);+#3850 = LINE('',#3851,#3852);+#3851 = CARTESIAN_POINT('',(0.,0.));+#3852 = VECTOR('',#3853,1.);+#3853 = DIRECTION('',(0.,-1.));+#3854 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3855 = ADVANCED_FACE('',(#3856),#1062,.T.);+#3856 = FACE_BOUND('',#3857,.T.);+#3857 = EDGE_LOOP('',(#3858,#3859,#3860,#3883));+#3858 = ORIENTED_EDGE('',*,*,#3784,.T.);+#3859 = ORIENTED_EDGE('',*,*,#1041,.T.);+#3860 = ORIENTED_EDGE('',*,*,#3861,.F.);+#3861 = EDGE_CURVE('',#3862,#1042,#3864,.T.);+#3862 = VERTEX_POINT('',#3863);+#3863 = CARTESIAN_POINT('',(1.225,-0.875,0.));+#3864 = SURFACE_CURVE('',#3865,(#3869,#3876),.PCURVE_S1.);+#3865 = LINE('',#3866,#3867);+#3866 = CARTESIAN_POINT('',(1.225,-0.875,0.));+#3867 = VECTOR('',#3868,1.);+#3868 = DIRECTION('',(0.,0.,1.));+#3869 = PCURVE('',#1062,#3870);+#3870 = DEFINITIONAL_REPRESENTATION('',(#3871),#3875);+#3871 = LINE('',#3872,#3873);+#3872 = CARTESIAN_POINT('',(6.28318530718,0.));+#3873 = VECTOR('',#3874,1.);+#3874 = DIRECTION('',(-0.,-1.));+#3875 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3876 = PCURVE('',#1090,#3877);+#3877 = DEFINITIONAL_REPRESENTATION('',(#3878),#3882);+#3878 = LINE('',#3879,#3880);+#3879 = CARTESIAN_POINT('',(0.275,0.));+#3880 = VECTOR('',#3881,1.);+#3881 = DIRECTION('',(0.,-1.));+#3882 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3883 = ORIENTED_EDGE('',*,*,#3884,.T.);+#3884 = EDGE_CURVE('',#3862,#3755,#3885,.T.);+#3885 = SURFACE_CURVE('',#3886,(#3891,#3898),.PCURVE_S1.);+#3886 = CIRCLE('',#3887,0.125);+#3887 = AXIS2_PLACEMENT_3D('',#3888,#3889,#3890);+#3888 = CARTESIAN_POINT('',(1.225,-1.,0.));+#3889 = DIRECTION('',(0.,-0.,1.));+#3890 = DIRECTION('',(3.445092848398E-16,1.,0.));+#3891 = PCURVE('',#1062,#3892);+#3892 = DEFINITIONAL_REPRESENTATION('',(#3893),#3897);+#3893 = LINE('',#3894,#3895);+#3894 = CARTESIAN_POINT('',(6.28318530718,0.));+#3895 = VECTOR('',#3896,1.);+#3896 = DIRECTION('',(-1.,0.));+#3897 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3898 = PCURVE('',#3772,#3899);+#3899 = DEFINITIONAL_REPRESENTATION('',(#3900),#3904);+#3900 = CIRCLE('',#3901,0.125);+#3901 = AXIS2_PLACEMENT_2D('',#3902,#3903);+#3902 = CARTESIAN_POINT('',(-3.439572083629E-17,9.9839749899E-02));+#3903 = DIRECTION('',(1.,0.));+#3904 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3905 = ADVANCED_FACE('',(#3906),#1090,.F.);+#3906 = FACE_BOUND('',#3907,.F.);+#3907 = EDGE_LOOP('',(#3908,#3931,#3954,#3975,#3976,#3977));+#3908 = ORIENTED_EDGE('',*,*,#3909,.F.);+#3909 = EDGE_CURVE('',#3910,#3862,#3912,.T.);+#3910 = VERTEX_POINT('',#3911);+#3911 = CARTESIAN_POINT('',(1.5,-0.875,0.));+#3912 = SURFACE_CURVE('',#3913,(#3917,#3924),.PCURVE_S1.);+#3913 = LINE('',#3914,#3915);+#3914 = CARTESIAN_POINT('',(1.5,-0.875,0.));+#3915 = VECTOR('',#3916,1.);+#3916 = DIRECTION('',(-1.,3.445092848398E-16,0.));+#3917 = PCURVE('',#1090,#3918);+#3918 = DEFINITIONAL_REPRESENTATION('',(#3919),#3923);+#3919 = LINE('',#3920,#3921);+#3920 = CARTESIAN_POINT('',(0.,0.));+#3921 = VECTOR('',#3922,1.);+#3922 = DIRECTION('',(1.,0.));+#3923 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3924 = PCURVE('',#3772,#3925);+#3925 = DEFINITIONAL_REPRESENTATION('',(#3926),#3930);+#3926 = LINE('',#3927,#3928);+#3927 = CARTESIAN_POINT('',(0.125,-0.175160250101));+#3928 = VECTOR('',#3929,1.);+#3929 = DIRECTION('',(0.,1.));+#3930 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3931 = ORIENTED_EDGE('',*,*,#3932,.T.);+#3932 = EDGE_CURVE('',#3910,#3933,#3935,.T.);+#3933 = VERTEX_POINT('',#3934);+#3934 = CARTESIAN_POINT('',(1.5,-0.875,0.2));+#3935 = SURFACE_CURVE('',#3936,(#3940,#3947),.PCURVE_S1.);+#3936 = LINE('',#3937,#3938);+#3937 = CARTESIAN_POINT('',(1.5,-0.875,0.));+#3938 = VECTOR('',#3939,1.);+#3939 = DIRECTION('',(0.,0.,1.));+#3940 = PCURVE('',#1090,#3941);+#3941 = DEFINITIONAL_REPRESENTATION('',(#3942),#3946);+#3942 = LINE('',#3943,#3944);+#3943 = CARTESIAN_POINT('',(0.,0.));+#3944 = VECTOR('',#3945,1.);+#3945 = DIRECTION('',(0.,-1.));+#3946 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3947 = PCURVE('',#3844,#3948);+#3948 = DEFINITIONAL_REPRESENTATION('',(#3949),#3953);+#3949 = LINE('',#3950,#3951);+#3950 = CARTESIAN_POINT('',(0.25,0.));+#3951 = VECTOR('',#3952,1.);+#3952 = DIRECTION('',(0.,-1.));+#3953 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3954 = ORIENTED_EDGE('',*,*,#3955,.T.);+#3955 = EDGE_CURVE('',#3933,#1781,#3956,.T.);+#3956 = SURFACE_CURVE('',#3957,(#3961,#3968),.PCURVE_S1.);+#3957 = LINE('',#3958,#3959);+#3958 = CARTESIAN_POINT('',(1.5,-0.875,0.2));+#3959 = VECTOR('',#3960,1.);+#3960 = DIRECTION('',(-1.,3.445092848398E-16,0.));+#3961 = PCURVE('',#1090,#3962);+#3962 = DEFINITIONAL_REPRESENTATION('',(#3963),#3967);+#3963 = LINE('',#3964,#3965);+#3964 = CARTESIAN_POINT('',(0.,-0.2));+#3965 = VECTOR('',#3966,1.);+#3966 = DIRECTION('',(1.,0.));+#3967 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3968 = PCURVE('',#1796,#3969);+#3969 = DEFINITIONAL_REPRESENTATION('',(#3970),#3974);+#3970 = LINE('',#3971,#3972);+#3971 = CARTESIAN_POINT('',(0.125,-0.175160250101));+#3972 = VECTOR('',#3973,1.);+#3973 = DIRECTION('',(0.,1.));+#3974 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3975 = ORIENTED_EDGE('',*,*,#1808,.T.);+#3976 = ORIENTED_EDGE('',*,*,#1074,.F.);+#3977 = ORIENTED_EDGE('',*,*,#3861,.F.);+#3978 = ADVANCED_FACE('',(#3979),#1141,.F.);+#3979 = FACE_BOUND('',#3980,.F.);+#3980 = EDGE_LOOP('',(#3981,#4011,#4032,#4033,#4034,#4057));+#3981 = ORIENTED_EDGE('',*,*,#3982,.F.);+#3982 = EDGE_CURVE('',#3983,#3985,#3987,.T.);+#3983 = VERTEX_POINT('',#3984);+#3984 = CARTESIAN_POINT('',(1.225,-0.625,0.));+#3985 = VERTEX_POINT('',#3986);+#3986 = CARTESIAN_POINT('',(1.5,-0.625,0.));+#3987 = SURFACE_CURVE('',#3988,(#3992,#3999),.PCURVE_S1.);+#3988 = LINE('',#3989,#3990);+#3989 = CARTESIAN_POINT('',(1.225,-0.625,0.));+#3990 = VECTOR('',#3991,1.);+#3991 = DIRECTION('',(1.,-3.445092848398E-16,0.));+#3992 = PCURVE('',#1141,#3993);+#3993 = DEFINITIONAL_REPRESENTATION('',(#3994),#3998);+#3994 = LINE('',#3995,#3996);+#3995 = CARTESIAN_POINT('',(0.,0.));+#3996 = VECTOR('',#3997,1.);+#3997 = DIRECTION('',(1.,0.));+#3998 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3999 = PCURVE('',#4000,#4005);+#4000 = PLANE('',#4001);+#4001 = AXIS2_PLACEMENT_3D('',#4002,#4003,#4004);+#4002 = CARTESIAN_POINT('',(1.324839749899,-0.5,0.));+#4003 = DIRECTION('',(0.,0.,1.));+#4004 = DIRECTION('',(3.445092848398E-16,1.,-0.));+#4005 = DEFINITIONAL_REPRESENTATION('',(#4006),#4010);+#4006 = LINE('',#4007,#4008);+#4007 = CARTESIAN_POINT('',(-0.125,9.9839749899E-02));+#4008 = VECTOR('',#4009,1.);+#4009 = DIRECTION('',(0.,-1.));+#4010 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4011 = ORIENTED_EDGE('',*,*,#4012,.T.);+#4012 = EDGE_CURVE('',#3983,#1126,#4013,.T.);+#4013 = SURFACE_CURVE('',#4014,(#4018,#4025),.PCURVE_S1.);+#4014 = LINE('',#4015,#4016);+#4015 = CARTESIAN_POINT('',(1.225,-0.625,0.));+#4016 = VECTOR('',#4017,1.);+#4017 = DIRECTION('',(0.,0.,1.));+#4018 = PCURVE('',#1141,#4019);+#4019 = DEFINITIONAL_REPRESENTATION('',(#4020),#4024);+#4020 = LINE('',#4021,#4022);+#4021 = CARTESIAN_POINT('',(0.,0.));+#4022 = VECTOR('',#4023,1.);+#4023 = DIRECTION('',(0.,-1.));+#4024 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4025 = PCURVE('',#1174,#4026);+#4026 = DEFINITIONAL_REPRESENTATION('',(#4027),#4031);+#4027 = LINE('',#4028,#4029);+#4028 = CARTESIAN_POINT('',(3.14159265359,0.));+#4029 = VECTOR('',#4030,1.);+#4030 = DIRECTION('',(-0.,-1.));+#4031 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4032 = ORIENTED_EDGE('',*,*,#1125,.F.);+#4033 = ORIENTED_EDGE('',*,*,#1830,.T.);+#4034 = ORIENTED_EDGE('',*,*,#4035,.T.);+#4035 = EDGE_CURVE('',#1831,#4036,#4038,.T.);+#4036 = VERTEX_POINT('',#4037);+#4037 = CARTESIAN_POINT('',(1.5,-0.625,0.2));+#4038 = SURFACE_CURVE('',#4039,(#4043,#4050),.PCURVE_S1.);+#4039 = LINE('',#4040,#4041);+#4040 = CARTESIAN_POINT('',(1.225,-0.625,0.2));+#4041 = VECTOR('',#4042,1.);+#4042 = DIRECTION('',(1.,-3.445092848398E-16,0.));+#4043 = PCURVE('',#1141,#4044);+#4044 = DEFINITIONAL_REPRESENTATION('',(#4045),#4049);+#4045 = LINE('',#4046,#4047);+#4046 = CARTESIAN_POINT('',(0.,-0.2));+#4047 = VECTOR('',#4048,1.);+#4048 = DIRECTION('',(1.,0.));+#4049 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4050 = PCURVE('',#1869,#4051);+#4051 = DEFINITIONAL_REPRESENTATION('',(#4052),#4056);+#4052 = LINE('',#4053,#4054);+#4053 = CARTESIAN_POINT('',(-0.125,9.9839749899E-02));+#4054 = VECTOR('',#4055,1.);+#4055 = DIRECTION('',(0.,-1.));+#4056 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4057 = ORIENTED_EDGE('',*,*,#4058,.F.);+#4058 = EDGE_CURVE('',#3985,#4036,#4059,.T.);+#4059 = SURFACE_CURVE('',#4060,(#4064,#4071),.PCURVE_S1.);+#4060 = LINE('',#4061,#4062);+#4061 = CARTESIAN_POINT('',(1.5,-0.625,0.));+#4062 = VECTOR('',#4063,1.);+#4063 = DIRECTION('',(0.,0.,1.));+#4064 = PCURVE('',#1141,#4065);+#4065 = DEFINITIONAL_REPRESENTATION('',(#4066),#4070);+#4066 = LINE('',#4067,#4068);+#4067 = CARTESIAN_POINT('',(0.275,0.));+#4068 = VECTOR('',#4069,1.);+#4069 = DIRECTION('',(0.,-1.));+#4070 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4071 = PCURVE('',#4072,#4077);+#4072 = PLANE('',#4073);+#4073 = AXIS2_PLACEMENT_3D('',#4074,#4075,#4076);+#4074 = CARTESIAN_POINT('',(1.5,-0.625,0.));+#4075 = DIRECTION('',(-1.,3.445092848398E-16,0.));+#4076 = DIRECTION('',(3.445092848398E-16,1.,0.));+#4077 = DEFINITIONAL_REPRESENTATION('',(#4078),#4082);+#4078 = LINE('',#4079,#4080);+#4079 = CARTESIAN_POINT('',(0.,0.));+#4080 = VECTOR('',#4081,1.);+#4081 = DIRECTION('',(0.,-1.));+#4082 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4083 = ADVANCED_FACE('',(#4084),#1174,.T.);+#4084 = FACE_BOUND('',#4085,.T.);+#4085 = EDGE_LOOP('',(#4086,#4087,#4088,#4111));+#4086 = ORIENTED_EDGE('',*,*,#4012,.T.);+#4087 = ORIENTED_EDGE('',*,*,#1153,.T.);+#4088 = ORIENTED_EDGE('',*,*,#4089,.F.);+#4089 = EDGE_CURVE('',#4090,#1154,#4092,.T.);+#4090 = VERTEX_POINT('',#4091);+#4091 = CARTESIAN_POINT('',(1.225,-0.375,0.));+#4092 = SURFACE_CURVE('',#4093,(#4097,#4104),.PCURVE_S1.);+#4093 = LINE('',#4094,#4095);+#4094 = CARTESIAN_POINT('',(1.225,-0.375,0.));+#4095 = VECTOR('',#4096,1.);+#4096 = DIRECTION('',(0.,0.,1.));+#4097 = PCURVE('',#1174,#4098);+#4098 = DEFINITIONAL_REPRESENTATION('',(#4099),#4103);+#4099 = LINE('',#4100,#4101);+#4100 = CARTESIAN_POINT('',(6.28318530718,0.));+#4101 = VECTOR('',#4102,1.);+#4102 = DIRECTION('',(-0.,-1.));+#4103 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4104 = PCURVE('',#1202,#4105);+#4105 = DEFINITIONAL_REPRESENTATION('',(#4106),#4110);+#4106 = LINE('',#4107,#4108);+#4107 = CARTESIAN_POINT('',(0.275,0.));+#4108 = VECTOR('',#4109,1.);+#4109 = DIRECTION('',(0.,-1.));+#4110 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4111 = ORIENTED_EDGE('',*,*,#4112,.T.);+#4112 = EDGE_CURVE('',#4090,#3983,#4113,.T.);+#4113 = SURFACE_CURVE('',#4114,(#4119,#4126),.PCURVE_S1.);+#4114 = CIRCLE('',#4115,0.125);+#4115 = AXIS2_PLACEMENT_3D('',#4116,#4117,#4118);+#4116 = CARTESIAN_POINT('',(1.225,-0.5,0.));+#4117 = DIRECTION('',(0.,-0.,1.));+#4118 = DIRECTION('',(3.445092848398E-16,1.,0.));+#4119 = PCURVE('',#1174,#4120);+#4120 = DEFINITIONAL_REPRESENTATION('',(#4121),#4125);+#4121 = LINE('',#4122,#4123);+#4122 = CARTESIAN_POINT('',(6.28318530718,0.));+#4123 = VECTOR('',#4124,1.);+#4124 = DIRECTION('',(-1.,0.));+#4125 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4126 = PCURVE('',#4000,#4127);+#4127 = DEFINITIONAL_REPRESENTATION('',(#4128),#4132);+#4128 = CIRCLE('',#4129,0.125);+#4129 = AXIS2_PLACEMENT_2D('',#4130,#4131);+#4130 = CARTESIAN_POINT('',(-3.439572083629E-17,9.9839749899E-02));+#4131 = DIRECTION('',(1.,0.));+#4132 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4133 = ADVANCED_FACE('',(#4134),#1202,.F.);+#4134 = FACE_BOUND('',#4135,.F.);+#4135 = EDGE_LOOP('',(#4136,#4159,#4182,#4203,#4204,#4205));+#4136 = ORIENTED_EDGE('',*,*,#4137,.F.);+#4137 = EDGE_CURVE('',#4138,#4090,#4140,.T.);+#4138 = VERTEX_POINT('',#4139);+#4139 = CARTESIAN_POINT('',(1.5,-0.375,0.));+#4140 = SURFACE_CURVE('',#4141,(#4145,#4152),.PCURVE_S1.);+#4141 = LINE('',#4142,#4143);+#4142 = CARTESIAN_POINT('',(1.5,-0.375,0.));+#4143 = VECTOR('',#4144,1.);+#4144 = DIRECTION('',(-1.,3.445092848398E-16,0.));+#4145 = PCURVE('',#1202,#4146);+#4146 = DEFINITIONAL_REPRESENTATION('',(#4147),#4151);+#4147 = LINE('',#4148,#4149);+#4148 = CARTESIAN_POINT('',(0.,0.));+#4149 = VECTOR('',#4150,1.);+#4150 = DIRECTION('',(1.,0.));+#4151 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4152 = PCURVE('',#4000,#4153);+#4153 = DEFINITIONAL_REPRESENTATION('',(#4154),#4158);+#4154 = LINE('',#4155,#4156);+#4155 = CARTESIAN_POINT('',(0.125,-0.175160250101));+#4156 = VECTOR('',#4157,1.);+#4157 = DIRECTION('',(0.,1.));+#4158 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4159 = ORIENTED_EDGE('',*,*,#4160,.T.);+#4160 = EDGE_CURVE('',#4138,#4161,#4163,.T.);+#4161 = VERTEX_POINT('',#4162);+#4162 = CARTESIAN_POINT('',(1.5,-0.375,0.2));+#4163 = SURFACE_CURVE('',#4164,(#4168,#4175),.PCURVE_S1.);+#4164 = LINE('',#4165,#4166);+#4165 = CARTESIAN_POINT('',(1.5,-0.375,0.));+#4166 = VECTOR('',#4167,1.);+#4167 = DIRECTION('',(0.,0.,1.));+#4168 = PCURVE('',#1202,#4169);+#4169 = DEFINITIONAL_REPRESENTATION('',(#4170),#4174);+#4170 = LINE('',#4171,#4172);+#4171 = CARTESIAN_POINT('',(0.,0.));+#4172 = VECTOR('',#4173,1.);+#4173 = DIRECTION('',(0.,-1.));+#4174 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4175 = PCURVE('',#4072,#4176);+#4176 = DEFINITIONAL_REPRESENTATION('',(#4177),#4181);+#4177 = LINE('',#4178,#4179);+#4178 = CARTESIAN_POINT('',(0.25,0.));+#4179 = VECTOR('',#4180,1.);+#4180 = DIRECTION('',(0.,-1.));+#4181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4182 = ORIENTED_EDGE('',*,*,#4183,.T.);+#4183 = EDGE_CURVE('',#4161,#1854,#4184,.T.);+#4184 = SURFACE_CURVE('',#4185,(#4189,#4196),.PCURVE_S1.);+#4185 = LINE('',#4186,#4187);+#4186 = CARTESIAN_POINT('',(1.5,-0.375,0.2));+#4187 = VECTOR('',#4188,1.);+#4188 = DIRECTION('',(-1.,3.445092848398E-16,0.));+#4189 = PCURVE('',#1202,#4190);+#4190 = DEFINITIONAL_REPRESENTATION('',(#4191),#4195);+#4191 = LINE('',#4192,#4193);+#4192 = CARTESIAN_POINT('',(0.,-0.2));+#4193 = VECTOR('',#4194,1.);+#4194 = DIRECTION('',(1.,0.));+#4195 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4196 = PCURVE('',#1869,#4197);+#4197 = DEFINITIONAL_REPRESENTATION('',(#4198),#4202);+#4198 = LINE('',#4199,#4200);+#4199 = CARTESIAN_POINT('',(0.125,-0.175160250101));+#4200 = VECTOR('',#4201,1.);+#4201 = DIRECTION('',(0.,1.));+#4202 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4203 = ORIENTED_EDGE('',*,*,#1881,.T.);+#4204 = ORIENTED_EDGE('',*,*,#1186,.F.);+#4205 = ORIENTED_EDGE('',*,*,#4089,.F.);+#4206 = ADVANCED_FACE('',(#4207),#1253,.F.);+#4207 = FACE_BOUND('',#4208,.F.);+#4208 = EDGE_LOOP('',(#4209,#4239,#4260,#4261,#4262,#4285));+#4209 = ORIENTED_EDGE('',*,*,#4210,.F.);+#4210 = EDGE_CURVE('',#4211,#4213,#4215,.T.);+#4211 = VERTEX_POINT('',#4212);+#4212 = CARTESIAN_POINT('',(1.225,-0.125,0.));+#4213 = VERTEX_POINT('',#4214);+#4214 = CARTESIAN_POINT('',(1.5,-0.125,0.));+#4215 = SURFACE_CURVE('',#4216,(#4220,#4227),.PCURVE_S1.);+#4216 = LINE('',#4217,#4218);+#4217 = CARTESIAN_POINT('',(1.225,-0.125,0.));+#4218 = VECTOR('',#4219,1.);+#4219 = DIRECTION('',(1.,-3.445092848398E-16,0.));+#4220 = PCURVE('',#1253,#4221);+#4221 = DEFINITIONAL_REPRESENTATION('',(#4222),#4226);+#4222 = LINE('',#4223,#4224);+#4223 = CARTESIAN_POINT('',(0.,0.));+#4224 = VECTOR('',#4225,1.);+#4225 = DIRECTION('',(1.,0.));+#4226 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4227 = PCURVE('',#4228,#4233);+#4228 = PLANE('',#4229);+#4229 = AXIS2_PLACEMENT_3D('',#4230,#4231,#4232);+#4230 = CARTESIAN_POINT('',(1.324839749899,-3.053113317719E-16,0.));+#4231 = DIRECTION('',(0.,0.,1.));+#4232 = DIRECTION('',(3.445092848398E-16,1.,-0.));+#4233 = DEFINITIONAL_REPRESENTATION('',(#4234),#4238);+#4234 = LINE('',#4235,#4236);+#4235 = CARTESIAN_POINT('',(-0.125,9.9839749899E-02));+#4236 = VECTOR('',#4237,1.);+#4237 = DIRECTION('',(0.,-1.));+#4238 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4239 = ORIENTED_EDGE('',*,*,#4240,.T.);+#4240 = EDGE_CURVE('',#4211,#1238,#4241,.T.);+#4241 = SURFACE_CURVE('',#4242,(#4246,#4253),.PCURVE_S1.);+#4242 = LINE('',#4243,#4244);+#4243 = CARTESIAN_POINT('',(1.225,-0.125,0.));+#4244 = VECTOR('',#4245,1.);+#4245 = DIRECTION('',(0.,0.,1.));+#4246 = PCURVE('',#1253,#4247);+#4247 = DEFINITIONAL_REPRESENTATION('',(#4248),#4252);+#4248 = LINE('',#4249,#4250);+#4249 = CARTESIAN_POINT('',(0.,0.));+#4250 = VECTOR('',#4251,1.);+#4251 = DIRECTION('',(0.,-1.));+#4252 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4253 = PCURVE('',#1286,#4254);+#4254 = DEFINITIONAL_REPRESENTATION('',(#4255),#4259);+#4255 = LINE('',#4256,#4257);+#4256 = CARTESIAN_POINT('',(3.14159265359,0.));+#4257 = VECTOR('',#4258,1.);+#4258 = DIRECTION('',(-0.,-1.));+#4259 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4260 = ORIENTED_EDGE('',*,*,#1237,.F.);+#4261 = ORIENTED_EDGE('',*,*,#1903,.T.);+#4262 = ORIENTED_EDGE('',*,*,#4263,.T.);+#4263 = EDGE_CURVE('',#1904,#4264,#4266,.T.);+#4264 = VERTEX_POINT('',#4265);+#4265 = CARTESIAN_POINT('',(1.5,-0.125,0.2));+#4266 = SURFACE_CURVE('',#4267,(#4271,#4278),.PCURVE_S1.);+#4267 = LINE('',#4268,#4269);+#4268 = CARTESIAN_POINT('',(1.225,-0.125,0.2));+#4269 = VECTOR('',#4270,1.);+#4270 = DIRECTION('',(1.,-3.445092848398E-16,0.));+#4271 = PCURVE('',#1253,#4272);+#4272 = DEFINITIONAL_REPRESENTATION('',(#4273),#4277);+#4273 = LINE('',#4274,#4275);+#4274 = CARTESIAN_POINT('',(0.,-0.2));+#4275 = VECTOR('',#4276,1.);+#4276 = DIRECTION('',(1.,0.));+#4277 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4278 = PCURVE('',#1942,#4279);+#4279 = DEFINITIONAL_REPRESENTATION('',(#4280),#4284);+#4280 = LINE('',#4281,#4282);+#4281 = CARTESIAN_POINT('',(-0.125,9.9839749899E-02));+#4282 = VECTOR('',#4283,1.);+#4283 = DIRECTION('',(0.,-1.));+#4284 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4285 = ORIENTED_EDGE('',*,*,#4286,.F.);+#4286 = EDGE_CURVE('',#4213,#4264,#4287,.T.);+#4287 = SURFACE_CURVE('',#4288,(#4292,#4299),.PCURVE_S1.);+#4288 = LINE('',#4289,#4290);+#4289 = CARTESIAN_POINT('',(1.5,-0.125,0.));+#4290 = VECTOR('',#4291,1.);+#4291 = DIRECTION('',(0.,0.,1.));+#4292 = PCURVE('',#1253,#4293);+#4293 = DEFINITIONAL_REPRESENTATION('',(#4294),#4298);+#4294 = LINE('',#4295,#4296);+#4295 = CARTESIAN_POINT('',(0.275,0.));+#4296 = VECTOR('',#4297,1.);+#4297 = DIRECTION('',(0.,-1.));+#4298 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4299 = PCURVE('',#4300,#4305);+#4300 = PLANE('',#4301);+#4301 = AXIS2_PLACEMENT_3D('',#4302,#4303,#4304);+#4302 = CARTESIAN_POINT('',(1.5,-0.125,0.));+#4303 = DIRECTION('',(-1.,3.445092848398E-16,0.));+#4304 = DIRECTION('',(3.445092848398E-16,1.,0.));+#4305 = DEFINITIONAL_REPRESENTATION('',(#4306),#4310);+#4306 = LINE('',#4307,#4308);+#4307 = CARTESIAN_POINT('',(0.,0.));+#4308 = VECTOR('',#4309,1.);+#4309 = DIRECTION('',(0.,-1.));+#4310 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4311 = ADVANCED_FACE('',(#4312),#1286,.T.);+#4312 = FACE_BOUND('',#4313,.T.);+#4313 = EDGE_LOOP('',(#4314,#4315,#4316,#4339));+#4314 = ORIENTED_EDGE('',*,*,#4240,.T.);+#4315 = ORIENTED_EDGE('',*,*,#1265,.T.);+#4316 = ORIENTED_EDGE('',*,*,#4317,.F.);+#4317 = EDGE_CURVE('',#4318,#1266,#4320,.T.);+#4318 = VERTEX_POINT('',#4319);+#4319 = CARTESIAN_POINT('',(1.225,0.125,0.));+#4320 = SURFACE_CURVE('',#4321,(#4325,#4332),.PCURVE_S1.);+#4321 = LINE('',#4322,#4323);+#4322 = CARTESIAN_POINT('',(1.225,0.125,0.));+#4323 = VECTOR('',#4324,1.);+#4324 = DIRECTION('',(0.,0.,1.));+#4325 = PCURVE('',#1286,#4326);+#4326 = DEFINITIONAL_REPRESENTATION('',(#4327),#4331);+#4327 = LINE('',#4328,#4329);+#4328 = CARTESIAN_POINT('',(6.28318530718,0.));+#4329 = VECTOR('',#4330,1.);+#4330 = DIRECTION('',(-0.,-1.));+#4331 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4332 = PCURVE('',#1314,#4333);+#4333 = DEFINITIONAL_REPRESENTATION('',(#4334),#4338);+#4334 = LINE('',#4335,#4336);+#4335 = CARTESIAN_POINT('',(0.275,0.));+#4336 = VECTOR('',#4337,1.);+#4337 = DIRECTION('',(0.,-1.));+#4338 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4339 = ORIENTED_EDGE('',*,*,#4340,.T.);+#4340 = EDGE_CURVE('',#4318,#4211,#4341,.T.);+#4341 = SURFACE_CURVE('',#4342,(#4347,#4354),.PCURVE_S1.);+#4342 = CIRCLE('',#4343,0.125);+#4343 = AXIS2_PLACEMENT_3D('',#4344,#4345,#4346);+#4344 = CARTESIAN_POINT('',(1.225,-2.775557561563E-16,0.));+#4345 = DIRECTION('',(0.,-0.,1.));+#4346 = DIRECTION('',(3.445092848398E-16,1.,0.));+#4347 = PCURVE('',#1286,#4348);+#4348 = DEFINITIONAL_REPRESENTATION('',(#4349),#4353);+#4349 = LINE('',#4350,#4351);+#4350 = CARTESIAN_POINT('',(6.28318530718,0.));+#4351 = VECTOR('',#4352,1.);+#4352 = DIRECTION('',(-1.,0.));+#4353 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4354 = PCURVE('',#4228,#4355);+#4355 = DEFINITIONAL_REPRESENTATION('',(#4356),#4360);+#4356 = CIRCLE('',#4357,0.125);+#4357 = AXIS2_PLACEMENT_2D('',#4358,#4359);+#4358 = CARTESIAN_POINT('',(-6.640145220689E-18,9.9839749899E-02));+#4359 = DIRECTION('',(1.,0.));+#4360 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4361 = ADVANCED_FACE('',(#4362),#1314,.F.);+#4362 = FACE_BOUND('',#4363,.F.);+#4363 = EDGE_LOOP('',(#4364,#4387,#4410,#4431,#4432,#4433));+#4364 = ORIENTED_EDGE('',*,*,#4365,.F.);+#4365 = EDGE_CURVE('',#4366,#4318,#4368,.T.);+#4366 = VERTEX_POINT('',#4367);+#4367 = CARTESIAN_POINT('',(1.5,0.125,0.));+#4368 = SURFACE_CURVE('',#4369,(#4373,#4380),.PCURVE_S1.);+#4369 = LINE('',#4370,#4371);+#4370 = CARTESIAN_POINT('',(1.5,0.125,0.));+#4371 = VECTOR('',#4372,1.);+#4372 = DIRECTION('',(-1.,3.445092848398E-16,0.));+#4373 = PCURVE('',#1314,#4374);+#4374 = DEFINITIONAL_REPRESENTATION('',(#4375),#4379);+#4375 = LINE('',#4376,#4377);+#4376 = CARTESIAN_POINT('',(0.,0.));+#4377 = VECTOR('',#4378,1.);+#4378 = DIRECTION('',(1.,0.));+#4379 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4380 = PCURVE('',#4228,#4381);+#4381 = DEFINITIONAL_REPRESENTATION('',(#4382),#4386);+#4382 = LINE('',#4383,#4384);+#4383 = CARTESIAN_POINT('',(0.125,-0.175160250101));+#4384 = VECTOR('',#4385,1.);+#4385 = DIRECTION('',(0.,1.));+#4386 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4387 = ORIENTED_EDGE('',*,*,#4388,.T.);+#4388 = EDGE_CURVE('',#4366,#4389,#4391,.T.);+#4389 = VERTEX_POINT('',#4390);+#4390 = CARTESIAN_POINT('',(1.5,0.125,0.2));+#4391 = SURFACE_CURVE('',#4392,(#4396,#4403),.PCURVE_S1.);+#4392 = LINE('',#4393,#4394);+#4393 = CARTESIAN_POINT('',(1.5,0.125,0.));+#4394 = VECTOR('',#4395,1.);+#4395 = DIRECTION('',(0.,0.,1.));+#4396 = PCURVE('',#1314,#4397);+#4397 = DEFINITIONAL_REPRESENTATION('',(#4398),#4402);+#4398 = LINE('',#4399,#4400);+#4399 = CARTESIAN_POINT('',(0.,0.));+#4400 = VECTOR('',#4401,1.);+#4401 = DIRECTION('',(0.,-1.));+#4402 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4403 = PCURVE('',#4300,#4404);+#4404 = DEFINITIONAL_REPRESENTATION('',(#4405),#4409);+#4405 = LINE('',#4406,#4407);+#4406 = CARTESIAN_POINT('',(0.25,0.));+#4407 = VECTOR('',#4408,1.);+#4408 = DIRECTION('',(0.,-1.));+#4409 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4410 = ORIENTED_EDGE('',*,*,#4411,.T.);+#4411 = EDGE_CURVE('',#4389,#1927,#4412,.T.);+#4412 = SURFACE_CURVE('',#4413,(#4417,#4424),.PCURVE_S1.);+#4413 = LINE('',#4414,#4415);+#4414 = CARTESIAN_POINT('',(1.5,0.125,0.2));+#4415 = VECTOR('',#4416,1.);+#4416 = DIRECTION('',(-1.,3.445092848398E-16,0.));+#4417 = PCURVE('',#1314,#4418);+#4418 = DEFINITIONAL_REPRESENTATION('',(#4419),#4423);+#4419 = LINE('',#4420,#4421);+#4420 = CARTESIAN_POINT('',(0.,-0.2));+#4421 = VECTOR('',#4422,1.);+#4422 = DIRECTION('',(1.,0.));+#4423 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4424 = PCURVE('',#1942,#4425);+#4425 = DEFINITIONAL_REPRESENTATION('',(#4426),#4430);+#4426 = LINE('',#4427,#4428);+#4427 = CARTESIAN_POINT('',(0.125,-0.175160250101));+#4428 = VECTOR('',#4429,1.);+#4429 = DIRECTION('',(0.,1.));+#4430 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4431 = ORIENTED_EDGE('',*,*,#1954,.T.);+#4432 = ORIENTED_EDGE('',*,*,#1298,.F.);+#4433 = ORIENTED_EDGE('',*,*,#4317,.F.);+#4434 = ADVANCED_FACE('',(#4435),#1365,.F.);+#4435 = FACE_BOUND('',#4436,.F.);+#4436 = EDGE_LOOP('',(#4437,#4467,#4488,#4489,#4490,#4513));+#4437 = ORIENTED_EDGE('',*,*,#4438,.F.);+#4438 = EDGE_CURVE('',#4439,#4441,#4443,.T.);+#4439 = VERTEX_POINT('',#4440);+#4440 = CARTESIAN_POINT('',(1.225,0.375,0.));+#4441 = VERTEX_POINT('',#4442);+#4442 = CARTESIAN_POINT('',(1.5,0.375,0.));+#4443 = SURFACE_CURVE('',#4444,(#4448,#4455),.PCURVE_S1.);+#4444 = LINE('',#4445,#4446);+#4445 = CARTESIAN_POINT('',(1.225,0.375,0.));+#4446 = VECTOR('',#4447,1.);+#4447 = DIRECTION('',(1.,-3.445092848398E-16,0.));+#4448 = PCURVE('',#1365,#4449);+#4449 = DEFINITIONAL_REPRESENTATION('',(#4450),#4454);+#4450 = LINE('',#4451,#4452);+#4451 = CARTESIAN_POINT('',(0.,0.));+#4452 = VECTOR('',#4453,1.);+#4453 = DIRECTION('',(1.,0.));+#4454 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4455 = PCURVE('',#4456,#4461);+#4456 = PLANE('',#4457);+#4457 = AXIS2_PLACEMENT_3D('',#4458,#4459,#4460);+#4458 = CARTESIAN_POINT('',(1.324839749899,0.5,0.));+#4459 = DIRECTION('',(0.,0.,1.));+#4460 = DIRECTION('',(3.445092848398E-16,1.,-0.));+#4461 = DEFINITIONAL_REPRESENTATION('',(#4462),#4466);+#4462 = LINE('',#4463,#4464);+#4463 = CARTESIAN_POINT('',(-0.125,9.9839749899E-02));+#4464 = VECTOR('',#4465,1.);+#4465 = DIRECTION('',(0.,-1.));+#4466 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4467 = ORIENTED_EDGE('',*,*,#4468,.T.);+#4468 = EDGE_CURVE('',#4439,#1350,#4469,.T.);+#4469 = SURFACE_CURVE('',#4470,(#4474,#4481),.PCURVE_S1.);+#4470 = LINE('',#4471,#4472);+#4471 = CARTESIAN_POINT('',(1.225,0.375,0.));+#4472 = VECTOR('',#4473,1.);+#4473 = DIRECTION('',(0.,0.,1.));+#4474 = PCURVE('',#1365,#4475);+#4475 = DEFINITIONAL_REPRESENTATION('',(#4476),#4480);+#4476 = LINE('',#4477,#4478);+#4477 = CARTESIAN_POINT('',(0.,0.));+#4478 = VECTOR('',#4479,1.);+#4479 = DIRECTION('',(0.,-1.));+#4480 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4481 = PCURVE('',#1398,#4482);+#4482 = DEFINITIONAL_REPRESENTATION('',(#4483),#4487);+#4483 = LINE('',#4484,#4485);+#4484 = CARTESIAN_POINT('',(3.14159265359,0.));+#4485 = VECTOR('',#4486,1.);+#4486 = DIRECTION('',(-0.,-1.));+#4487 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4488 = ORIENTED_EDGE('',*,*,#1349,.F.);+#4489 = ORIENTED_EDGE('',*,*,#1976,.T.);+#4490 = ORIENTED_EDGE('',*,*,#4491,.T.);+#4491 = EDGE_CURVE('',#1977,#4492,#4494,.T.);+#4492 = VERTEX_POINT('',#4493);+#4493 = CARTESIAN_POINT('',(1.5,0.375,0.2));+#4494 = SURFACE_CURVE('',#4495,(#4499,#4506),.PCURVE_S1.);+#4495 = LINE('',#4496,#4497);+#4496 = CARTESIAN_POINT('',(1.225,0.375,0.2));+#4497 = VECTOR('',#4498,1.);+#4498 = DIRECTION('',(1.,-3.445092848398E-16,0.));+#4499 = PCURVE('',#1365,#4500);+#4500 = DEFINITIONAL_REPRESENTATION('',(#4501),#4505);+#4501 = LINE('',#4502,#4503);+#4502 = CARTESIAN_POINT('',(0.,-0.2));+#4503 = VECTOR('',#4504,1.);+#4504 = DIRECTION('',(1.,0.));+#4505 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4506 = PCURVE('',#2015,#4507);+#4507 = DEFINITIONAL_REPRESENTATION('',(#4508),#4512);+#4508 = LINE('',#4509,#4510);+#4509 = CARTESIAN_POINT('',(-0.125,9.9839749899E-02));+#4510 = VECTOR('',#4511,1.);+#4511 = DIRECTION('',(0.,-1.));+#4512 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4513 = ORIENTED_EDGE('',*,*,#4514,.F.);+#4514 = EDGE_CURVE('',#4441,#4492,#4515,.T.);+#4515 = SURFACE_CURVE('',#4516,(#4520,#4527),.PCURVE_S1.);+#4516 = LINE('',#4517,#4518);+#4517 = CARTESIAN_POINT('',(1.5,0.375,0.));+#4518 = VECTOR('',#4519,1.);+#4519 = DIRECTION('',(0.,0.,1.));+#4520 = PCURVE('',#1365,#4521);+#4521 = DEFINITIONAL_REPRESENTATION('',(#4522),#4526);+#4522 = LINE('',#4523,#4524);+#4523 = CARTESIAN_POINT('',(0.275,0.));+#4524 = VECTOR('',#4525,1.);+#4525 = DIRECTION('',(0.,-1.));+#4526 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4527 = PCURVE('',#4528,#4533);+#4528 = PLANE('',#4529);+#4529 = AXIS2_PLACEMENT_3D('',#4530,#4531,#4532);+#4530 = CARTESIAN_POINT('',(1.5,0.375,0.));+#4531 = DIRECTION('',(-1.,3.445092848398E-16,0.));+#4532 = DIRECTION('',(3.445092848398E-16,1.,0.));+#4533 = DEFINITIONAL_REPRESENTATION('',(#4534),#4538);+#4534 = LINE('',#4535,#4536);+#4535 = CARTESIAN_POINT('',(0.,0.));+#4536 = VECTOR('',#4537,1.);+#4537 = DIRECTION('',(0.,-1.));+#4538 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4539 = ADVANCED_FACE('',(#4540),#1398,.T.);+#4540 = FACE_BOUND('',#4541,.T.);+#4541 = EDGE_LOOP('',(#4542,#4543,#4544,#4567));+#4542 = ORIENTED_EDGE('',*,*,#4468,.T.);+#4543 = ORIENTED_EDGE('',*,*,#1377,.T.);+#4544 = ORIENTED_EDGE('',*,*,#4545,.F.);+#4545 = EDGE_CURVE('',#4546,#1378,#4548,.T.);+#4546 = VERTEX_POINT('',#4547);+#4547 = CARTESIAN_POINT('',(1.225,0.625,0.));+#4548 = SURFACE_CURVE('',#4549,(#4553,#4560),.PCURVE_S1.);+#4549 = LINE('',#4550,#4551);+#4550 = CARTESIAN_POINT('',(1.225,0.625,0.));+#4551 = VECTOR('',#4552,1.);+#4552 = DIRECTION('',(0.,0.,1.));+#4553 = PCURVE('',#1398,#4554);+#4554 = DEFINITIONAL_REPRESENTATION('',(#4555),#4559);+#4555 = LINE('',#4556,#4557);+#4556 = CARTESIAN_POINT('',(6.28318530718,0.));+#4557 = VECTOR('',#4558,1.);+#4558 = DIRECTION('',(-0.,-1.));+#4559 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4560 = PCURVE('',#1426,#4561);+#4561 = DEFINITIONAL_REPRESENTATION('',(#4562),#4566);+#4562 = LINE('',#4563,#4564);+#4563 = CARTESIAN_POINT('',(0.275,0.));+#4564 = VECTOR('',#4565,1.);+#4565 = DIRECTION('',(0.,-1.));+#4566 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4567 = ORIENTED_EDGE('',*,*,#4568,.T.);+#4568 = EDGE_CURVE('',#4546,#4439,#4569,.T.);+#4569 = SURFACE_CURVE('',#4570,(#4575,#4582),.PCURVE_S1.);+#4570 = CIRCLE('',#4571,0.125);+#4571 = AXIS2_PLACEMENT_3D('',#4572,#4573,#4574);+#4572 = CARTESIAN_POINT('',(1.225,0.5,0.));+#4573 = DIRECTION('',(0.,-0.,1.));+#4574 = DIRECTION('',(3.445092848398E-16,1.,0.));+#4575 = PCURVE('',#1398,#4576);+#4576 = DEFINITIONAL_REPRESENTATION('',(#4577),#4581);+#4577 = LINE('',#4578,#4579);+#4578 = CARTESIAN_POINT('',(6.28318530718,0.));+#4579 = VECTOR('',#4580,1.);+#4580 = DIRECTION('',(-1.,0.));+#4581 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4582 = PCURVE('',#4456,#4583);+#4583 = DEFINITIONAL_REPRESENTATION('',(#4584),#4588);+#4584 = CIRCLE('',#4585,0.125);+#4585 = AXIS2_PLACEMENT_2D('',#4586,#4587);+#4586 = CARTESIAN_POINT('',(-3.439572083629E-17,9.9839749899E-02));+#4587 = DIRECTION('',(1.,0.));+#4588 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4589 = ADVANCED_FACE('',(#4590),#1426,.F.);+#4590 = FACE_BOUND('',#4591,.F.);+#4591 = EDGE_LOOP('',(#4592,#4615,#4638,#4659,#4660,#4661));+#4592 = ORIENTED_EDGE('',*,*,#4593,.F.);+#4593 = EDGE_CURVE('',#4594,#4546,#4596,.T.);+#4594 = VERTEX_POINT('',#4595);+#4595 = CARTESIAN_POINT('',(1.5,0.625,0.));+#4596 = SURFACE_CURVE('',#4597,(#4601,#4608),.PCURVE_S1.);+#4597 = LINE('',#4598,#4599);+#4598 = CARTESIAN_POINT('',(1.5,0.625,0.));+#4599 = VECTOR('',#4600,1.);+#4600 = DIRECTION('',(-1.,3.445092848398E-16,0.));+#4601 = PCURVE('',#1426,#4602);+#4602 = DEFINITIONAL_REPRESENTATION('',(#4603),#4607);+#4603 = LINE('',#4604,#4605);+#4604 = CARTESIAN_POINT('',(0.,0.));+#4605 = VECTOR('',#4606,1.);+#4606 = DIRECTION('',(1.,0.));+#4607 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4608 = PCURVE('',#4456,#4609);+#4609 = DEFINITIONAL_REPRESENTATION('',(#4610),#4614);+#4610 = LINE('',#4611,#4612);+#4611 = CARTESIAN_POINT('',(0.125,-0.175160250101));+#4612 = VECTOR('',#4613,1.);+#4613 = DIRECTION('',(0.,1.));+#4614 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4615 = ORIENTED_EDGE('',*,*,#4616,.T.);+#4616 = EDGE_CURVE('',#4594,#4617,#4619,.T.);+#4617 = VERTEX_POINT('',#4618);+#4618 = CARTESIAN_POINT('',(1.5,0.625,0.2));+#4619 = SURFACE_CURVE('',#4620,(#4624,#4631),.PCURVE_S1.);+#4620 = LINE('',#4621,#4622);+#4621 = CARTESIAN_POINT('',(1.5,0.625,0.));+#4622 = VECTOR('',#4623,1.);+#4623 = DIRECTION('',(0.,0.,1.));+#4624 = PCURVE('',#1426,#4625);+#4625 = DEFINITIONAL_REPRESENTATION('',(#4626),#4630);+#4626 = LINE('',#4627,#4628);+#4627 = CARTESIAN_POINT('',(0.,0.));+#4628 = VECTOR('',#4629,1.);+#4629 = DIRECTION('',(0.,-1.));+#4630 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4631 = PCURVE('',#4528,#4632);+#4632 = DEFINITIONAL_REPRESENTATION('',(#4633),#4637);+#4633 = LINE('',#4634,#4635);+#4634 = CARTESIAN_POINT('',(0.25,0.));+#4635 = VECTOR('',#4636,1.);+#4636 = DIRECTION('',(0.,-1.));+#4637 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4638 = ORIENTED_EDGE('',*,*,#4639,.T.);+#4639 = EDGE_CURVE('',#4617,#2000,#4640,.T.);+#4640 = SURFACE_CURVE('',#4641,(#4645,#4652),.PCURVE_S1.);+#4641 = LINE('',#4642,#4643);+#4642 = CARTESIAN_POINT('',(1.5,0.625,0.2));+#4643 = VECTOR('',#4644,1.);+#4644 = DIRECTION('',(-1.,3.445092848398E-16,0.));+#4645 = PCURVE('',#1426,#4646);+#4646 = DEFINITIONAL_REPRESENTATION('',(#4647),#4651);+#4647 = LINE('',#4648,#4649);+#4648 = CARTESIAN_POINT('',(0.,-0.2));+#4649 = VECTOR('',#4650,1.);+#4650 = DIRECTION('',(1.,0.));+#4651 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4652 = PCURVE('',#2015,#4653);+#4653 = DEFINITIONAL_REPRESENTATION('',(#4654),#4658);+#4654 = LINE('',#4655,#4656);+#4655 = CARTESIAN_POINT('',(0.125,-0.175160250101));+#4656 = VECTOR('',#4657,1.);+#4657 = DIRECTION('',(0.,1.));+#4658 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4659 = ORIENTED_EDGE('',*,*,#2027,.T.);+#4660 = ORIENTED_EDGE('',*,*,#1410,.F.);+#4661 = ORIENTED_EDGE('',*,*,#4545,.F.);+#4662 = ADVANCED_FACE('',(#4663),#1477,.F.);+#4663 = FACE_BOUND('',#4664,.F.);+#4664 = EDGE_LOOP('',(#4665,#4695,#4716,#4717,#4718,#4741));+#4665 = ORIENTED_EDGE('',*,*,#4666,.F.);+#4666 = EDGE_CURVE('',#4667,#4669,#4671,.T.);+#4667 = VERTEX_POINT('',#4668);+#4668 = CARTESIAN_POINT('',(1.225,0.875,0.));+#4669 = VERTEX_POINT('',#4670);+#4670 = CARTESIAN_POINT('',(1.5,0.875,0.));+#4671 = SURFACE_CURVE('',#4672,(#4676,#4683),.PCURVE_S1.);+#4672 = LINE('',#4673,#4674);+#4673 = CARTESIAN_POINT('',(1.225,0.875,0.));+#4674 = VECTOR('',#4675,1.);+#4675 = DIRECTION('',(1.,-3.445092848398E-16,0.));+#4676 = PCURVE('',#1477,#4677);+#4677 = DEFINITIONAL_REPRESENTATION('',(#4678),#4682);+#4678 = LINE('',#4679,#4680);+#4679 = CARTESIAN_POINT('',(0.,0.));+#4680 = VECTOR('',#4681,1.);+#4681 = DIRECTION('',(1.,0.));+#4682 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4683 = PCURVE('',#4684,#4689);+#4684 = PLANE('',#4685);+#4685 = AXIS2_PLACEMENT_3D('',#4686,#4687,#4688);+#4686 = CARTESIAN_POINT('',(1.324839749899,1.,0.));+#4687 = DIRECTION('',(0.,0.,1.));+#4688 = DIRECTION('',(3.445092848398E-16,1.,-0.));+#4689 = DEFINITIONAL_REPRESENTATION('',(#4690),#4694);+#4690 = LINE('',#4691,#4692);+#4691 = CARTESIAN_POINT('',(-0.125,9.9839749899E-02));+#4692 = VECTOR('',#4693,1.);+#4693 = DIRECTION('',(0.,-1.));+#4694 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4695 = ORIENTED_EDGE('',*,*,#4696,.T.);+#4696 = EDGE_CURVE('',#4667,#1462,#4697,.T.);+#4697 = SURFACE_CURVE('',#4698,(#4702,#4709),.PCURVE_S1.);+#4698 = LINE('',#4699,#4700);+#4699 = CARTESIAN_POINT('',(1.225,0.875,0.));+#4700 = VECTOR('',#4701,1.);+#4701 = DIRECTION('',(0.,0.,1.));+#4702 = PCURVE('',#1477,#4703);+#4703 = DEFINITIONAL_REPRESENTATION('',(#4704),#4708);+#4704 = LINE('',#4705,#4706);+#4705 = CARTESIAN_POINT('',(0.,0.));+#4706 = VECTOR('',#4707,1.);+#4707 = DIRECTION('',(0.,-1.));+#4708 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4709 = PCURVE('',#1510,#4710);+#4710 = DEFINITIONAL_REPRESENTATION('',(#4711),#4715);+#4711 = LINE('',#4712,#4713);+#4712 = CARTESIAN_POINT('',(3.14159265359,0.));+#4713 = VECTOR('',#4714,1.);+#4714 = DIRECTION('',(-0.,-1.));+#4715 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4716 = ORIENTED_EDGE('',*,*,#1461,.F.);+#4717 = ORIENTED_EDGE('',*,*,#2049,.T.);+#4718 = ORIENTED_EDGE('',*,*,#4719,.T.);+#4719 = EDGE_CURVE('',#2050,#4720,#4722,.T.);+#4720 = VERTEX_POINT('',#4721);+#4721 = CARTESIAN_POINT('',(1.5,0.875,0.2));+#4722 = SURFACE_CURVE('',#4723,(#4727,#4734),.PCURVE_S1.);+#4723 = LINE('',#4724,#4725);+#4724 = CARTESIAN_POINT('',(1.225,0.875,0.2));+#4725 = VECTOR('',#4726,1.);+#4726 = DIRECTION('',(1.,-3.445092848398E-16,0.));+#4727 = PCURVE('',#1477,#4728);+#4728 = DEFINITIONAL_REPRESENTATION('',(#4729),#4733);+#4729 = LINE('',#4730,#4731);+#4730 = CARTESIAN_POINT('',(0.,-0.2));+#4731 = VECTOR('',#4732,1.);+#4732 = DIRECTION('',(1.,0.));+#4733 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4734 = PCURVE('',#2088,#4735);+#4735 = DEFINITIONAL_REPRESENTATION('',(#4736),#4740);+#4736 = LINE('',#4737,#4738);+#4737 = CARTESIAN_POINT('',(-0.125,9.9839749899E-02));+#4738 = VECTOR('',#4739,1.);+#4739 = DIRECTION('',(0.,-1.));+#4740 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4741 = ORIENTED_EDGE('',*,*,#4742,.F.);+#4742 = EDGE_CURVE('',#4669,#4720,#4743,.T.);+#4743 = SURFACE_CURVE('',#4744,(#4748,#4755),.PCURVE_S1.);+#4744 = LINE('',#4745,#4746);+#4745 = CARTESIAN_POINT('',(1.5,0.875,0.));+#4746 = VECTOR('',#4747,1.);+#4747 = DIRECTION('',(0.,0.,1.));+#4748 = PCURVE('',#1477,#4749);+#4749 = DEFINITIONAL_REPRESENTATION('',(#4750),#4754);+#4750 = LINE('',#4751,#4752);+#4751 = CARTESIAN_POINT('',(0.275,0.));+#4752 = VECTOR('',#4753,1.);+#4753 = DIRECTION('',(0.,-1.));+#4754 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4755 = PCURVE('',#4756,#4761);+#4756 = PLANE('',#4757);+#4757 = AXIS2_PLACEMENT_3D('',#4758,#4759,#4760);+#4758 = CARTESIAN_POINT('',(1.5,0.875,0.));+#4759 = DIRECTION('',(-1.,3.445092848398E-16,0.));+#4760 = DIRECTION('',(3.445092848398E-16,1.,0.));+#4761 = DEFINITIONAL_REPRESENTATION('',(#4762),#4766);+#4762 = LINE('',#4763,#4764);+#4763 = CARTESIAN_POINT('',(0.,0.));+#4764 = VECTOR('',#4765,1.);+#4765 = DIRECTION('',(0.,-1.));+#4766 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4767 = ADVANCED_FACE('',(#4768),#1510,.T.);+#4768 = FACE_BOUND('',#4769,.T.);+#4769 = EDGE_LOOP('',(#4770,#4771,#4772,#4795));+#4770 = ORIENTED_EDGE('',*,*,#4696,.T.);+#4771 = ORIENTED_EDGE('',*,*,#1489,.T.);+#4772 = ORIENTED_EDGE('',*,*,#4773,.F.);+#4773 = EDGE_CURVE('',#4774,#1490,#4776,.T.);+#4774 = VERTEX_POINT('',#4775);+#4775 = CARTESIAN_POINT('',(1.225,1.125,0.));+#4776 = SURFACE_CURVE('',#4777,(#4781,#4788),.PCURVE_S1.);+#4777 = LINE('',#4778,#4779);+#4778 = CARTESIAN_POINT('',(1.225,1.125,0.));+#4779 = VECTOR('',#4780,1.);+#4780 = DIRECTION('',(0.,0.,1.));+#4781 = PCURVE('',#1510,#4782);+#4782 = DEFINITIONAL_REPRESENTATION('',(#4783),#4787);+#4783 = LINE('',#4784,#4785);+#4784 = CARTESIAN_POINT('',(6.28318530718,0.));+#4785 = VECTOR('',#4786,1.);+#4786 = DIRECTION('',(-0.,-1.));+#4787 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4788 = PCURVE('',#1536,#4789);+#4789 = DEFINITIONAL_REPRESENTATION('',(#4790),#4794);+#4790 = LINE('',#4791,#4792);+#4791 = CARTESIAN_POINT('',(0.275,0.));+#4792 = VECTOR('',#4793,1.);+#4793 = DIRECTION('',(0.,-1.));+#4794 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4795 = ORIENTED_EDGE('',*,*,#4796,.T.);+#4796 = EDGE_CURVE('',#4774,#4667,#4797,.T.);+#4797 = SURFACE_CURVE('',#4798,(#4803,#4810),.PCURVE_S1.);+#4798 = CIRCLE('',#4799,0.125);+#4799 = AXIS2_PLACEMENT_3D('',#4800,#4801,#4802);+#4800 = CARTESIAN_POINT('',(1.225,1.,0.));+#4801 = DIRECTION('',(0.,-0.,1.));+#4802 = DIRECTION('',(3.445092848398E-16,1.,0.));+#4803 = PCURVE('',#1510,#4804);+#4804 = DEFINITIONAL_REPRESENTATION('',(#4805),#4809);+#4805 = LINE('',#4806,#4807);+#4806 = CARTESIAN_POINT('',(6.28318530718,0.));+#4807 = VECTOR('',#4808,1.);+#4808 = DIRECTION('',(-1.,0.));+#4809 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4810 = PCURVE('',#4684,#4811);+#4811 = DEFINITIONAL_REPRESENTATION('',(#4812),#4816);+#4812 = CIRCLE('',#4813,0.125);+#4813 = AXIS2_PLACEMENT_2D('',#4814,#4815);+#4814 = CARTESIAN_POINT('',(-3.439572083629E-17,9.9839749899E-02));+#4815 = DIRECTION('',(1.,0.));+#4816 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4817 = ADVANCED_FACE('',(#4818),#1536,.F.);+#4818 = FACE_BOUND('',#4819,.F.);+#4819 = EDGE_LOOP('',(#4820,#4843,#4866,#4887,#4888,#4889));+#4820 = ORIENTED_EDGE('',*,*,#4821,.F.);+#4821 = EDGE_CURVE('',#4822,#4774,#4824,.T.);+#4822 = VERTEX_POINT('',#4823);+#4823 = CARTESIAN_POINT('',(1.5,1.125,0.));+#4824 = SURFACE_CURVE('',#4825,(#4829,#4836),.PCURVE_S1.);+#4825 = LINE('',#4826,#4827);+#4826 = CARTESIAN_POINT('',(1.5,1.125,0.));+#4827 = VECTOR('',#4828,1.);+#4828 = DIRECTION('',(-1.,3.445092848398E-16,0.));+#4829 = PCURVE('',#1536,#4830);+#4830 = DEFINITIONAL_REPRESENTATION('',(#4831),#4835);+#4831 = LINE('',#4832,#4833);+#4832 = CARTESIAN_POINT('',(0.,0.));+#4833 = VECTOR('',#4834,1.);+#4834 = DIRECTION('',(1.,0.));+#4835 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4836 = PCURVE('',#4684,#4837);+#4837 = DEFINITIONAL_REPRESENTATION('',(#4838),#4842);+#4838 = LINE('',#4839,#4840);+#4839 = CARTESIAN_POINT('',(0.125,-0.175160250101));+#4840 = VECTOR('',#4841,1.);+#4841 = DIRECTION('',(0.,1.));+#4842 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4843 = ORIENTED_EDGE('',*,*,#4844,.T.);+#4844 = EDGE_CURVE('',#4822,#4845,#4847,.T.);+#4845 = VERTEX_POINT('',#4846);+#4846 = CARTESIAN_POINT('',(1.5,1.125,0.2));+#4847 = SURFACE_CURVE('',#4848,(#4852,#4859),.PCURVE_S1.);+#4848 = LINE('',#4849,#4850);+#4849 = CARTESIAN_POINT('',(1.5,1.125,0.));+#4850 = VECTOR('',#4851,1.);+#4851 = DIRECTION('',(0.,0.,1.));+#4852 = PCURVE('',#1536,#4853);+#4853 = DEFINITIONAL_REPRESENTATION('',(#4854),#4858);+#4854 = LINE('',#4855,#4856);+#4855 = CARTESIAN_POINT('',(0.,0.));+#4856 = VECTOR('',#4857,1.);+#4857 = DIRECTION('',(0.,-1.));+#4858 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4859 = PCURVE('',#4756,#4860);+#4860 = DEFINITIONAL_REPRESENTATION('',(#4861),#4865);+#4861 = LINE('',#4862,#4863);+#4862 = CARTESIAN_POINT('',(0.25,0.));+#4863 = VECTOR('',#4864,1.);+#4864 = DIRECTION('',(0.,-1.));+#4865 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4866 = ORIENTED_EDGE('',*,*,#4867,.T.);+#4867 = EDGE_CURVE('',#4845,#2073,#4868,.T.);+#4868 = SURFACE_CURVE('',#4869,(#4873,#4880),.PCURVE_S1.);+#4869 = LINE('',#4870,#4871);+#4870 = CARTESIAN_POINT('',(1.5,1.125,0.2));+#4871 = VECTOR('',#4872,1.);+#4872 = DIRECTION('',(-1.,3.445092848398E-16,0.));+#4873 = PCURVE('',#1536,#4874);+#4874 = DEFINITIONAL_REPRESENTATION('',(#4875),#4879);+#4875 = LINE('',#4876,#4877);+#4876 = CARTESIAN_POINT('',(0.,-0.2));+#4877 = VECTOR('',#4878,1.);+#4878 = DIRECTION('',(1.,0.));+#4879 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4880 = PCURVE('',#2088,#4881);+#4881 = DEFINITIONAL_REPRESENTATION('',(#4882),#4886);+#4882 = LINE('',#4883,#4884);+#4883 = CARTESIAN_POINT('',(0.125,-0.175160250101));+#4884 = VECTOR('',#4885,1.);+#4885 = DIRECTION('',(0.,1.));+#4886 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4887 = ORIENTED_EDGE('',*,*,#2100,.T.);+#4888 = ORIENTED_EDGE('',*,*,#1522,.F.);+#4889 = ORIENTED_EDGE('',*,*,#4773,.F.);+#4890 = ADVANCED_FACE('',(#4891,#4897,#4932,#5142,#5418,#6415,#6599,+ #6809,#7458),#1723,.T.);+#4891 = FACE_BOUND('',#4892,.T.);+#4892 = EDGE_LOOP('',(#4893,#4894,#4895,#4896));+#4893 = ORIENTED_EDGE('',*,*,#2149,.F.);+#4894 = ORIENTED_EDGE('',*,*,#2175,.T.);+#4895 = ORIENTED_EDGE('',*,*,#3730,.T.);+#4896 = ORIENTED_EDGE('',*,*,#1707,.F.);+#4897 = FACE_BOUND('',#4898,.T.);+#4898 = EDGE_LOOP('',(#4899));+#4899 = ORIENTED_EDGE('',*,*,#4900,.T.);+#4900 = EDGE_CURVE('',#4901,#4901,#4903,.T.);+#4901 = VERTEX_POINT('',#4902);+#4902 = CARTESIAN_POINT('',(-1.05,0.875,1.02));+#4903 = SURFACE_CURVE('',#4904,(#4909,#4920),.PCURVE_S1.);+#4904 = CIRCLE('',#4905,0.175);+#4905 = AXIS2_PLACEMENT_3D('',#4906,#4907,#4908);+#4906 = CARTESIAN_POINT('',(-1.05,1.05,1.02));+#4907 = DIRECTION('',(-0.,0.,-1.));+#4908 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#4909 = PCURVE('',#1723,#4910);+#4910 = DEFINITIONAL_REPRESENTATION('',(#4911),#4919);+#4911 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#4912,#4913,#4914,#4915,+#4916,#4917,#4918),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#4912 = CARTESIAN_POINT('',(0.615,0.44));+#4913 = CARTESIAN_POINT('',(0.615,0.136891108675));+#4914 = CARTESIAN_POINT('',(0.3525,0.288445554338));+#4915 = CARTESIAN_POINT('',(9.E-02,0.44));+#4916 = CARTESIAN_POINT('',(0.3525,0.591554445662));+#4917 = CARTESIAN_POINT('',(0.615,0.743108891325));+#4918 = CARTESIAN_POINT('',(0.615,0.44));+#4919 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4920 = PCURVE('',#4921,#4926);+#4921 = CYLINDRICAL_SURFACE('',#4922,0.175);+#4922 = AXIS2_PLACEMENT_3D('',#4923,#4924,#4925);+#4923 = CARTESIAN_POINT('',(-1.05,1.05,1.04));+#4924 = DIRECTION('',(0.,0.,-1.));+#4925 = DIRECTION('',(-2.22044604925E-16,-1.,-0.));+#4926 = DEFINITIONAL_REPRESENTATION('',(#4927),#4931);+#4927 = LINE('',#4928,#4929);+#4928 = CARTESIAN_POINT('',(-4.138911435803E-13,2.E-02));+#4929 = VECTOR('',#4930,1.);+#4930 = DIRECTION('',(1.,-0.));+#4931 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4932 = FACE_BOUND('',#4933,.T.);+#4933 = EDGE_LOOP('',(#4934,#4962,#4988,#5014,#5040,#5066,#5092,#5118));+#4934 = ORIENTED_EDGE('',*,*,#4935,.T.);+#4935 = EDGE_CURVE('',#4936,#4938,#4940,.T.);+#4936 = VERTEX_POINT('',#4937);+#4937 = CARTESIAN_POINT('',(-0.723979317801,0.116995210193,1.02));+#4938 = VERTEX_POINT('',#4939);+#4939 = CARTESIAN_POINT('',(-0.813345365978,0.116995210193,1.02));+#4940 = SURFACE_CURVE('',#4941,(#4945,#4951),.PCURVE_S1.);+#4941 = LINE('',#4942,#4943);+#4942 = CARTESIAN_POINT('',(-1.106989658901,0.116995210193,1.02));+#4943 = VECTOR('',#4944,1.);+#4944 = DIRECTION('',(-1.,0.,0.));+#4945 = PCURVE('',#1723,#4946);+#4946 = DEFINITIONAL_REPRESENTATION('',(#4947),#4950);+#4947 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4948,#4949),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.383010341099,-0.293644292922),.PIECEWISE_BEZIER_KNOTS.);+#4948 = CARTESIAN_POINT('',(1.373004789807,0.766020682199));+#4949 = CARTESIAN_POINT('',(1.373004789807,0.676654634022));+#4950 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4951 = PCURVE('',#4952,#4957);+#4952 = PLANE('',#4953);+#4953 = AXIS2_PLACEMENT_3D('',#4954,#4955,#4956);+#4954 = CARTESIAN_POINT('',(-0.723979317801,0.116995210193,1.07));+#4955 = DIRECTION('',(0.,1.,0.));+#4956 = DIRECTION('',(-1.,0.,0.));+#4957 = DEFINITIONAL_REPRESENTATION('',(#4958),#4961);+#4958 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4959,#4960),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.383010341099,-0.293644292922),.PIECEWISE_BEZIER_KNOTS.);+#4959 = CARTESIAN_POINT('',(0.,-5.E-02));+#4960 = CARTESIAN_POINT('',(8.936604817708E-02,-5.E-02));+#4961 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4962 = ORIENTED_EDGE('',*,*,#4963,.T.);+#4963 = EDGE_CURVE('',#4938,#4964,#4966,.T.);+#4964 = VERTEX_POINT('',#4965);+#4965 = CARTESIAN_POINT('',(-0.813345365978,0.149388020833,1.02));+#4966 = SURFACE_CURVE('',#4967,(#4971,#4977),.PCURVE_S1.);+#4967 = LINE('',#4968,#4969);+#4968 = CARTESIAN_POINT('',(-0.813345365978,0.803497605097,1.02));+#4969 = VECTOR('',#4970,1.);+#4970 = DIRECTION('',(0.,1.,0.));+#4971 = PCURVE('',#1723,#4972);+#4972 = DEFINITIONAL_REPRESENTATION('',(#4973),#4976);+#4973 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4974,#4975),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.686502394903,-0.654109584263),.PIECEWISE_BEZIER_KNOTS.);+#4974 = CARTESIAN_POINT('',(1.373004789807,0.676654634022));+#4975 = CARTESIAN_POINT('',(1.340611979167,0.676654634022));+#4976 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4977 = PCURVE('',#4978,#4983);+#4978 = PLANE('',#4979);+#4979 = AXIS2_PLACEMENT_3D('',#4980,#4981,#4982);+#4980 = CARTESIAN_POINT('',(-0.813345365978,0.116995210193,1.07));+#4981 = DIRECTION('',(1.,0.,0.));+#4982 = DIRECTION('',(0.,1.,0.));+#4983 = DEFINITIONAL_REPRESENTATION('',(#4984),#4987);+#4984 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4985,#4986),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.686502394903,-0.654109584263),.PIECEWISE_BEZIER_KNOTS.);+#4985 = CARTESIAN_POINT('',(0.,-5.E-02));+#4986 = CARTESIAN_POINT('',(3.239281063988E-02,-5.E-02));+#4987 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4988 = ORIENTED_EDGE('',*,*,#4989,.T.);+#4989 = EDGE_CURVE('',#4964,#4990,#4992,.T.);+#4990 = VERTEX_POINT('',#4991);+#4991 = CARTESIAN_POINT('',(-0.596313534691,0.149388020833,1.02));+#4992 = SURFACE_CURVE('',#4993,(#4997,#5003),.PCURVE_S1.);+#4993 = LINE('',#4994,#4995);+#4994 = CARTESIAN_POINT('',(-1.151672682989,0.149388020833,1.02));+#4995 = VECTOR('',#4996,1.);+#4996 = DIRECTION('',(1.,0.,-0.));+#4997 = PCURVE('',#1723,#4998);+#4998 = DEFINITIONAL_REPRESENTATION('',(#4999),#5002);+#4999 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5000,#5001),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.338327317011,0.555359148298),.PIECEWISE_BEZIER_KNOTS.);+#5000 = CARTESIAN_POINT('',(1.340611979167,0.676654634022));+#5001 = CARTESIAN_POINT('',(1.340611979167,0.893686465309));+#5002 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5003 = PCURVE('',#5004,#5009);+#5004 = PLANE('',#5005);+#5005 = AXIS2_PLACEMENT_3D('',#5006,#5007,#5008);+#5006 = CARTESIAN_POINT('',(-0.813345365978,0.149388020833,1.07));+#5007 = DIRECTION('',(0.,-1.,0.));+#5008 = DIRECTION('',(1.,0.,0.));+#5009 = DEFINITIONAL_REPRESENTATION('',(#5010),#5013);+#5010 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5011,#5012),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.338327317011,0.555359148298),.PIECEWISE_BEZIER_KNOTS.);+#5011 = CARTESIAN_POINT('',(0.,-5.E-02));+#5012 = CARTESIAN_POINT('',(0.217031831287,-5.E-02));+#5013 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5014 = ORIENTED_EDGE('',*,*,#5015,.T.);+#5015 = EDGE_CURVE('',#4990,#5016,#5018,.T.);+#5016 = VERTEX_POINT('',#5017);+#5017 = CARTESIAN_POINT('',(-0.596313534691,0.116995210193,1.02));+#5018 = SURFACE_CURVE('',#5019,(#5023,#5029),.PCURVE_S1.);+#5019 = LINE('',#5020,#5021);+#5020 = CARTESIAN_POINT('',(-0.596313534691,0.819694010417,1.02));+#5021 = VECTOR('',#5022,1.);+#5022 = DIRECTION('',(0.,-1.,0.));+#5023 = PCURVE('',#1723,#5024);+#5024 = DEFINITIONAL_REPRESENTATION('',(#5025),#5028);+#5025 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5026,#5027),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.670305989583,0.702698800223),.PIECEWISE_BEZIER_KNOTS.);+#5026 = CARTESIAN_POINT('',(1.340611979167,0.893686465309));+#5027 = CARTESIAN_POINT('',(1.373004789807,0.893686465309));+#5028 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5029 = PCURVE('',#5030,#5035);+#5030 = PLANE('',#5031);+#5031 = AXIS2_PLACEMENT_3D('',#5032,#5033,#5034);+#5032 = CARTESIAN_POINT('',(-0.596313534691,0.149388020833,1.07));+#5033 = DIRECTION('',(-1.,0.,0.));+#5034 = DIRECTION('',(0.,-1.,0.));+#5035 = DEFINITIONAL_REPRESENTATION('',(#5036),#5039);+#5036 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5037,#5038),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.670305989583,0.702698800223),.PIECEWISE_BEZIER_KNOTS.);+#5037 = CARTESIAN_POINT('',(0.,-5.E-02));+#5038 = CARTESIAN_POINT('',(3.239281063988E-02,-5.E-02));+#5039 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5040 = ORIENTED_EDGE('',*,*,#5041,.T.);+#5041 = EDGE_CURVE('',#5016,#5042,#5044,.T.);+#5042 = VERTEX_POINT('',#5043);+#5043 = CARTESIAN_POINT('',(-0.685298490978,0.116995210193,1.02));+#5044 = SURFACE_CURVE('',#5045,(#5049,#5055),.PCURVE_S1.);+#5045 = LINE('',#5046,#5047);+#5046 = CARTESIAN_POINT('',(-1.043156767346,0.116995210193,1.02));+#5047 = VECTOR('',#5048,1.);+#5048 = DIRECTION('',(-1.,0.,0.));+#5049 = PCURVE('',#1723,#5050);+#5050 = DEFINITIONAL_REPRESENTATION('',(#5051),#5054);+#5051 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5052,#5053),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.446843232654,-0.357858276367),.PIECEWISE_BEZIER_KNOTS.);+#5052 = CARTESIAN_POINT('',(1.373004789807,0.893686465309));+#5053 = CARTESIAN_POINT('',(1.373004789807,0.804701509022));+#5054 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5055 = PCURVE('',#5056,#5061);+#5056 = PLANE('',#5057);+#5057 = AXIS2_PLACEMENT_3D('',#5058,#5059,#5060);+#5058 = CARTESIAN_POINT('',(-0.596313534691,0.116995210193,1.07));+#5059 = DIRECTION('',(0.,1.,0.));+#5060 = DIRECTION('',(-1.,0.,0.));+#5061 = DEFINITIONAL_REPRESENTATION('',(#5062),#5065);+#5062 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5063,#5064),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.446843232654,-0.357858276367),.PIECEWISE_BEZIER_KNOTS.);+#5063 = CARTESIAN_POINT('',(0.,-5.E-02));+#5064 = CARTESIAN_POINT('',(8.89849562872E-02,-5.E-02));+#5065 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5066 = ORIENTED_EDGE('',*,*,#5067,.T.);+#5067 = EDGE_CURVE('',#5042,#5068,#5070,.T.);+#5068 = VERTEX_POINT('',#5069);+#5069 = CARTESIAN_POINT('',(-0.685298490978,-0.135097074963,1.02));+#5070 = SURFACE_CURVE('',#5071,(#5075,#5081),.PCURVE_S1.);+#5071 = LINE('',#5072,#5073);+#5072 = CARTESIAN_POINT('',(-0.685298490978,0.803497605097,1.02));+#5073 = VECTOR('',#5074,1.);+#5074 = DIRECTION('',(0.,-1.,0.));+#5075 = PCURVE('',#1723,#5076);+#5076 = DEFINITIONAL_REPRESENTATION('',(#5077),#5080);+#5077 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5078,#5079),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.686502394903,0.93859468006),.PIECEWISE_BEZIER_KNOTS.);+#5078 = CARTESIAN_POINT('',(1.373004789807,0.804701509022));+#5079 = CARTESIAN_POINT('',(1.625097074963,0.804701509022));+#5080 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5081 = PCURVE('',#5082,#5087);+#5082 = PLANE('',#5083);+#5083 = AXIS2_PLACEMENT_3D('',#5084,#5085,#5086);+#5084 = CARTESIAN_POINT('',(-0.685298490978,0.116995210193,1.07));+#5085 = DIRECTION('',(-1.,0.,0.));+#5086 = DIRECTION('',(0.,-1.,0.));+#5087 = DEFINITIONAL_REPRESENTATION('',(#5088),#5091);+#5088 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5089,#5090),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.686502394903,0.93859468006),.PIECEWISE_BEZIER_KNOTS.);+#5089 = CARTESIAN_POINT('',(0.,-5.E-02));+#5090 = CARTESIAN_POINT('',(0.252092285156,-5.E-02));+#5091 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5092 = ORIENTED_EDGE('',*,*,#5093,.T.);+#5093 = EDGE_CURVE('',#5068,#5094,#5096,.T.);+#5094 = VERTEX_POINT('',#5095);+#5095 = CARTESIAN_POINT('',(-0.723979317801,-0.135097074963,1.02));+#5096 = SURFACE_CURVE('',#5097,(#5101,#5107),.PCURVE_S1.);+#5097 = LINE('',#5098,#5099);+#5098 = CARTESIAN_POINT('',(-1.087649245489,-0.135097074963,1.02));+#5099 = VECTOR('',#5100,1.);+#5100 = DIRECTION('',(-1.,0.,0.));+#5101 = PCURVE('',#1723,#5102);+#5102 = DEFINITIONAL_REPRESENTATION('',(#5103),#5106);+#5103 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5104,#5105),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.402350754511,-0.363669927688),.PIECEWISE_BEZIER_KNOTS.);+#5104 = CARTESIAN_POINT('',(1.625097074963,0.804701509022));+#5105 = CARTESIAN_POINT('',(1.625097074963,0.766020682199));+#5106 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5107 = PCURVE('',#5108,#5113);+#5108 = PLANE('',#5109);+#5109 = AXIS2_PLACEMENT_3D('',#5110,#5111,#5112);+#5110 = CARTESIAN_POINT('',(-0.685298490978,-0.135097074963,1.07));+#5111 = DIRECTION('',(0.,1.,0.));+#5112 = DIRECTION('',(-1.,0.,0.));+#5113 = DEFINITIONAL_REPRESENTATION('',(#5114),#5117);+#5114 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5115,#5116),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.402350754511,-0.363669927688),.PIECEWISE_BEZIER_KNOTS.);+#5115 = CARTESIAN_POINT('',(0.,-5.E-02));+#5116 = CARTESIAN_POINT('',(3.868082682292E-02,-5.E-02));+#5117 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5118 = ORIENTED_EDGE('',*,*,#5119,.T.);+#5119 = EDGE_CURVE('',#5094,#4936,#5120,.T.);+#5120 = SURFACE_CURVE('',#5121,(#5125,#5131),.PCURVE_S1.);+#5121 = LINE('',#5122,#5123);+#5122 = CARTESIAN_POINT('',(-0.723979317801,0.677451462519,1.02));+#5123 = VECTOR('',#5124,1.);+#5124 = DIRECTION('',(0.,1.,0.));+#5125 = PCURVE('',#1723,#5126);+#5126 = DEFINITIONAL_REPRESENTATION('',(#5127),#5130);+#5127 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5128,#5129),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.812548537481,-0.560456252325),.PIECEWISE_BEZIER_KNOTS.);+#5128 = CARTESIAN_POINT('',(1.625097074963,0.766020682199));+#5129 = CARTESIAN_POINT('',(1.373004789807,0.766020682199));+#5130 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5131 = PCURVE('',#5132,#5137);+#5132 = PLANE('',#5133);+#5133 = AXIS2_PLACEMENT_3D('',#5134,#5135,#5136);+#5134 = CARTESIAN_POINT('',(-0.723979317801,-0.135097074963,1.07));+#5135 = DIRECTION('',(1.,0.,0.));+#5136 = DIRECTION('',(0.,1.,0.));+#5137 = DEFINITIONAL_REPRESENTATION('',(#5138),#5141);+#5138 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5139,#5140),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.812548537481,-0.560456252325),.PIECEWISE_BEZIER_KNOTS.);+#5139 = CARTESIAN_POINT('',(0.,-5.E-02));+#5140 = CARTESIAN_POINT('',(0.252092285156,-5.E-02));+#5141 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5142 = FACE_BOUND('',#5143,.T.);+#5143 = EDGE_LOOP('',(#5144,#5172,#5198,#5224,#5260,#5296,#5332,#5368,+ #5394));+#5144 = ORIENTED_EDGE('',*,*,#5145,.T.);+#5145 = EDGE_CURVE('',#5146,#5148,#5150,.T.);+#5146 = VERTEX_POINT('',#5147);+#5147 = CARTESIAN_POINT('',(-0.511330043248,-0.135097074963,1.02));+#5148 = VERTEX_POINT('',#5149);+#5149 = CARTESIAN_POINT('',(-0.549820324126,-0.135097074963,1.02));+#5150 = SURFACE_CURVE('',#5151,(#5155,#5161),.PCURVE_S1.);+#5151 = LINE('',#5152,#5153);+#5152 = CARTESIAN_POINT('',(-1.000665021624,-0.135097074963,1.02));+#5153 = VECTOR('',#5154,1.);+#5154 = DIRECTION('',(-1.,0.,0.));+#5155 = PCURVE('',#1723,#5156);+#5156 = DEFINITIONAL_REPRESENTATION('',(#5157),#5160);+#5157 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5158,#5159),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.489334978376,-0.450844697498),.PIECEWISE_BEZIER_KNOTS.);+#5158 = CARTESIAN_POINT('',(1.625097074963,0.978669956752));+#5159 = CARTESIAN_POINT('',(1.625097074963,0.940179675874));+#5160 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5161 = PCURVE('',#5162,#5167);+#5162 = PLANE('',#5163);+#5163 = AXIS2_PLACEMENT_3D('',#5164,#5165,#5166);+#5164 = CARTESIAN_POINT('',(-0.511330043248,-0.135097074963,1.07));+#5165 = DIRECTION('',(0.,1.,0.));+#5166 = DIRECTION('',(-1.,0.,0.));+#5167 = DEFINITIONAL_REPRESENTATION('',(#5168),#5171);+#5168 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5169,#5170),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.489334978376,-0.450844697498),.PIECEWISE_BEZIER_KNOTS.);+#5169 = CARTESIAN_POINT('',(0.,-5.E-02));+#5170 = CARTESIAN_POINT('',(3.849028087798E-02,-5.E-02));+#5171 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5172 = ORIENTED_EDGE('',*,*,#5173,.T.);+#5173 = EDGE_CURVE('',#5148,#5174,#5176,.T.);+#5174 = VERTEX_POINT('',#5175);+#5175 = CARTESIAN_POINT('',(-0.549820324126,0.149388020833,1.02));+#5176 = SURFACE_CURVE('',#5177,(#5181,#5187),.PCURVE_S1.);+#5177 = LINE('',#5178,#5179);+#5178 = CARTESIAN_POINT('',(-0.549820324126,0.677451462519,1.02));+#5179 = VECTOR('',#5180,1.);+#5180 = DIRECTION('',(0.,1.,0.));+#5181 = PCURVE('',#1723,#5182);+#5182 = DEFINITIONAL_REPRESENTATION('',(#5183),#5186);+#5183 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5184,#5185),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.812548537481,-0.528063441685),.PIECEWISE_BEZIER_KNOTS.);+#5184 = CARTESIAN_POINT('',(1.625097074963,0.940179675874));+#5185 = CARTESIAN_POINT('',(1.340611979167,0.940179675874));+#5186 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5187 = PCURVE('',#5188,#5193);+#5188 = PLANE('',#5189);+#5189 = AXIS2_PLACEMENT_3D('',#5190,#5191,#5192);+#5190 = CARTESIAN_POINT('',(-0.549820324126,-0.135097074963,1.07));+#5191 = DIRECTION('',(1.,0.,0.));+#5192 = DIRECTION('',(0.,1.,0.));+#5193 = DEFINITIONAL_REPRESENTATION('',(#5194),#5197);+#5194 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5195,#5196),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.812548537481,-0.528063441685),.PIECEWISE_BEZIER_KNOTS.);+#5195 = CARTESIAN_POINT('',(0.,-5.E-02));+#5196 = CARTESIAN_POINT('',(0.284485095796,-5.E-02));+#5197 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5198 = ORIENTED_EDGE('',*,*,#5199,.T.);+#5199 = EDGE_CURVE('',#5174,#5200,#5202,.T.);+#5200 = VERTEX_POINT('',#5201);+#5201 = CARTESIAN_POINT('',(-0.466742292132,0.149388020833,1.02));+#5202 = SURFACE_CURVE('',#5203,(#5207,#5213),.PCURVE_S1.);+#5203 = LINE('',#5204,#5205);+#5204 = CARTESIAN_POINT('',(-1.019910162063,0.149388020833,1.02));+#5205 = VECTOR('',#5206,1.);+#5206 = DIRECTION('',(1.,0.,-0.));+#5207 = PCURVE('',#1723,#5208);+#5208 = DEFINITIONAL_REPRESENTATION('',(#5209),#5212);+#5209 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5210,#5211),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.470089837937,0.553167869931),.PIECEWISE_BEZIER_KNOTS.);+#5210 = CARTESIAN_POINT('',(1.340611979167,0.940179675874));+#5211 = CARTESIAN_POINT('',(1.340611979167,1.023257707868));+#5212 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5213 = PCURVE('',#5214,#5219);+#5214 = PLANE('',#5215);+#5215 = AXIS2_PLACEMENT_3D('',#5216,#5217,#5218);+#5216 = CARTESIAN_POINT('',(-0.549820324126,0.149388020833,1.07));+#5217 = DIRECTION('',(0.,-1.,0.));+#5218 = DIRECTION('',(1.,0.,0.));+#5219 = DEFINITIONAL_REPRESENTATION('',(#5220),#5223);+#5220 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5221,#5222),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.470089837937,0.553167869931),.PIECEWISE_BEZIER_KNOTS.);+#5221 = CARTESIAN_POINT('',(0.,-5.E-02));+#5222 = CARTESIAN_POINT('',(8.307803199405E-02,-5.E-02));+#5223 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5224 = ORIENTED_EDGE('',*,*,#5225,.F.);+#5225 = EDGE_CURVE('',#5226,#5200,#5228,.T.);+#5226 = VERTEX_POINT('',#5227);+#5227 = CARTESIAN_POINT('',(-0.394525378999,0.127761056083,1.02));+#5228 = SURFACE_CURVE('',#5229,(#5235,#5244),.PCURVE_S1.);+#5229 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5230,#5231,#5232,#5233,#5234),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5230 = CARTESIAN_POINT('',(-0.394525378999,0.127761056083,1.02));+#5231 = CARTESIAN_POINT('',(-0.406826159207,0.138583835568,1.02));+#5232 = CARTESIAN_POINT('',(-0.422974640237,0.145794484505,1.02));+#5233 = CARTESIAN_POINT('',(-0.442960209776,0.149388020833,1.02));+#5234 = CARTESIAN_POINT('',(-0.466742292132,0.149388020833,1.02));+#5235 = PCURVE('',#1723,#5236);+#5236 = DEFINITIONAL_REPRESENTATION('',(#5237),#5243);+#5237 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5238,#5239,#5240,#5241,#5242),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5238 = CARTESIAN_POINT('',(1.362238943917,1.095474621001));+#5239 = CARTESIAN_POINT('',(1.351416164432,1.083173840793));+#5240 = CARTESIAN_POINT('',(1.344205515495,1.067025359763));+#5241 = CARTESIAN_POINT('',(1.340611979167,1.047039790224));+#5242 = CARTESIAN_POINT('',(1.340611979167,1.023257707868));+#5243 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5244 = PCURVE('',#5245,#5252);+#5245 = SURFACE_OF_LINEAR_EXTRUSION('',#5246,#5250);+#5246 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5247,#5248,#5249),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5247 = CARTESIAN_POINT('',(-0.466742292132,0.149388020833,1.07));+#5248 = CARTESIAN_POINT('',(-0.419105805897,0.149388020833,1.07));+#5249 = CARTESIAN_POINT('',(-0.394525378999,0.127761056083,1.07));+#5250 = VECTOR('',#5251,1.);+#5251 = DIRECTION('',(0.,0.,1.));+#5252 = DEFINITIONAL_REPRESENTATION('',(#5253),#5259);+#5253 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5254,#5255,#5256,#5257,#5258),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5254 = CARTESIAN_POINT('',(1.,-5.E-02));+#5255 = CARTESIAN_POINT('',(0.749785057447,-5.E-02));+#5256 = CARTESIAN_POINT('',(0.499602828975,-5.E-02));+#5257 = CARTESIAN_POINT('',(0.249620450994,-5.E-02));+#5258 = CARTESIAN_POINT('',(0.,-5.E-02));+#5259 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5260 = ORIENTED_EDGE('',*,*,#5261,.F.);+#5261 = EDGE_CURVE('',#5262,#5226,#5264,.T.);+#5262 = VERTEX_POINT('',#5263);+#5263 = CARTESIAN_POINT('',(-0.369944952102,6.440452938988E-02,1.02));+#5264 = SURFACE_CURVE('',#5265,(#5271,#5280),.PCURVE_S1.);+#5265 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5266,#5267,#5268,#5269,#5270),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5266 = CARTESIAN_POINT('',(-0.369944952102,6.440452938988E-02,1.02));+#5267 = CARTESIAN_POINT('',(-0.369944952102,8.524845988913E-02,1.02));+#5268 = CARTESIAN_POINT('',(-0.374033492142,0.102771809693,1.02));+#5269 = CARTESIAN_POINT('',(-0.382231089811,0.116943987688,1.02));+#5270 = CARTESIAN_POINT('',(-0.394525378999,0.127761056083,1.02));+#5271 = PCURVE('',#1723,#5272);+#5272 = DEFINITIONAL_REPRESENTATION('',(#5273),#5279);+#5273 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5274,#5275,#5276,#5277,#5278),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5274 = CARTESIAN_POINT('',(1.42559547061,1.120055047898));+#5275 = CARTESIAN_POINT('',(1.404751540111,1.120055047898));+#5276 = CARTESIAN_POINT('',(1.387228190307,1.115966507858));+#5277 = CARTESIAN_POINT('',(1.373056012312,1.107768910189));+#5278 = CARTESIAN_POINT('',(1.362238943917,1.095474621001));+#5279 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5280 = PCURVE('',#5281,#5288);+#5281 = SURFACE_OF_LINEAR_EXTRUSION('',#5282,#5286);+#5282 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5283,#5284,#5285),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5283 = CARTESIAN_POINT('',(-0.394525378999,0.127761056083,1.07));+#5284 = CARTESIAN_POINT('',(-0.369944952102,0.106134091332,1.07));+#5285 = CARTESIAN_POINT('',(-0.369944952102,6.440452938988E-02,1.07));+#5286 = VECTOR('',#5287,1.);+#5287 = DIRECTION('',(0.,0.,1.));+#5288 = DEFINITIONAL_REPRESENTATION('',(#5289),#5295);+#5289 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5290,#5291,#5292,#5293,#5294),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5290 = CARTESIAN_POINT('',(1.,-5.E-02));+#5291 = CARTESIAN_POINT('',(0.750249828548,-5.E-02));+#5292 = CARTESIAN_POINT('',(0.500222302313,-5.E-02));+#5293 = CARTESIAN_POINT('',(0.250082906201,-5.E-02));+#5294 = CARTESIAN_POINT('',(0.,-5.E-02));+#5295 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5296 = ORIENTED_EDGE('',*,*,#5297,.F.);+#5297 = EDGE_CURVE('',#5298,#5262,#5300,.T.);+#5298 = VERTEX_POINT('',#5299);+#5299 = CARTESIAN_POINT('',(-0.394430106027,7.621837797616E-04,1.02));+#5300 = SURFACE_CURVE('',#5301,(#5307,#5316),.PCURVE_S1.);+#5301 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5302,#5303,#5304,#5305,#5306),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5302 = CARTESIAN_POINT('',(-0.394430106027,7.621837797616E-04,1.02));+#5303 = CARTESIAN_POINT('',(-0.382183032431,1.153198390693E-02,1.02));+#5304 = CARTESIAN_POINT('',(-0.374017275098,2.573638987988E-02,1.02));+#5305 = CARTESIAN_POINT('',(-0.369944952102,4.337119613923E-02,1.02));+#5306 = CARTESIAN_POINT('',(-0.369944952102,6.440452938988E-02,1.02));+#5307 = PCURVE('',#1723,#5308);+#5308 = DEFINITIONAL_REPRESENTATION('',(#5309),#5315);+#5309 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5310,#5311,#5312,#5313,#5314),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5310 = CARTESIAN_POINT('',(1.48923781622,1.095569893973));+#5311 = CARTESIAN_POINT('',(1.478468016093,1.107816967569));+#5312 = CARTESIAN_POINT('',(1.46426361012,1.115982724902));+#5313 = CARTESIAN_POINT('',(1.446628803861,1.120055047898));+#5314 = CARTESIAN_POINT('',(1.42559547061,1.120055047898));+#5315 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5316 = PCURVE('',#5317,#5324);+#5317 = SURFACE_OF_LINEAR_EXTRUSION('',#5318,#5322);+#5318 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5319,#5320,#5321),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5319 = CARTESIAN_POINT('',(-0.369944952102,6.440452938988E-02,1.07));+#5320 = CARTESIAN_POINT('',(-0.369944952102,2.229387555804E-02,1.07));+#5321 = CARTESIAN_POINT('',(-0.394430106027,7.621837797616E-04,1.07));+#5322 = VECTOR('',#5323,1.);+#5323 = DIRECTION('',(0.,0.,1.));+#5324 = DEFINITIONAL_REPRESENTATION('',(#5325),#5331);+#5325 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5326,#5327,#5328,#5329,#5330),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5326 = CARTESIAN_POINT('',(1.,-5.E-02));+#5327 = CARTESIAN_POINT('',(0.749908176327,-5.E-02));+#5328 = CARTESIAN_POINT('',(0.499764174509,-5.E-02));+#5329 = CARTESIAN_POINT('',(0.249738858658,-5.E-02));+#5330 = CARTESIAN_POINT('',(0.,-5.E-02));+#5331 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5332 = ORIENTED_EDGE('',*,*,#5333,.F.);+#5333 = EDGE_CURVE('',#5334,#5298,#5336,.T.);+#5334 = VERTEX_POINT('',#5335);+#5335 = CARTESIAN_POINT('',(-0.466742292132,-2.076950799851E-02,1.02));+#5336 = SURFACE_CURVE('',#5337,(#5343,#5352),.PCURVE_S1.);+#5337 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5338,#5339,#5340,#5341,#5342),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5338 = CARTESIAN_POINT('',(-0.466742292132,-2.076950799851E-02,1.02));+#5339 = CARTESIAN_POINT('',(-0.44286579178,-2.076950799851E-02,1.02));+#5340 = CARTESIAN_POINT('',(-0.422832361698,-1.719201577651E-02,1.02));+#5341 = CARTESIAN_POINT('',(-0.406683500429,-1.001317472209E-02,1.02));+#5342 = CARTESIAN_POINT('',(-0.394430106027,7.621837797616E-04,1.02));+#5343 = PCURVE('',#1723,#5344);+#5344 = DEFINITIONAL_REPRESENTATION('',(#5345),#5351);+#5345 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5346,#5347,#5348,#5349,#5350),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5346 = CARTESIAN_POINT('',(1.510769507999,1.023257707868));+#5347 = CARTESIAN_POINT('',(1.510769507999,1.04713420822));+#5348 = CARTESIAN_POINT('',(1.507192015777,1.067167638302));+#5349 = CARTESIAN_POINT('',(1.500013174722,1.083316499571));+#5350 = CARTESIAN_POINT('',(1.48923781622,1.095569893973));+#5351 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5352 = PCURVE('',#5353,#5360);+#5353 = SURFACE_OF_LINEAR_EXTRUSION('',#5354,#5358);+#5354 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5355,#5356,#5357),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5355 = CARTESIAN_POINT('',(-0.394430106027,7.621837797616E-04,1.07));+#5356 = CARTESIAN_POINT('',(-0.418915259952,-2.076950799851E-02,1.07));+#5357 = CARTESIAN_POINT('',(-0.466742292132,-2.076950799851E-02,1.07));+#5358 = VECTOR('',#5359,1.);+#5359 = DIRECTION('',(0.,0.,1.));+#5360 = DEFINITIONAL_REPRESENTATION('',(#5361),#5367);+#5361 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5362,#5363,#5364,#5365,#5366),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5362 = CARTESIAN_POINT('',(1.,-5.E-02));+#5363 = CARTESIAN_POINT('',(0.750386975067,-5.E-02));+#5364 = CARTESIAN_POINT('',(0.500406118701,-5.E-02));+#5365 = CARTESIAN_POINT('',(0.25022089794,-5.E-02));+#5366 = CARTESIAN_POINT('',(0.,-5.E-02));+#5367 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5368 = ORIENTED_EDGE('',*,*,#5369,.T.);+#5369 = EDGE_CURVE('',#5334,#5370,#5372,.T.);+#5370 = VERTEX_POINT('',#5371);+#5371 = CARTESIAN_POINT('',(-0.511330043248,-2.076950799851E-02,1.02));+#5372 = SURFACE_CURVE('',#5373,(#5377,#5383),.PCURVE_S1.);+#5373 = LINE('',#5374,#5375);+#5374 = CARTESIAN_POINT('',(-0.978371146066,-2.076950799851E-02,1.02));+#5375 = VECTOR('',#5376,1.);+#5376 = DIRECTION('',(-1.,0.,0.));+#5377 = PCURVE('',#1723,#5378);+#5378 = DEFINITIONAL_REPRESENTATION('',(#5379),#5382);+#5379 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5380,#5381),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.511628853934,-0.467041102818),.PIECEWISE_BEZIER_KNOTS.);+#5380 = CARTESIAN_POINT('',(1.510769507999,1.023257707868));+#5381 = CARTESIAN_POINT('',(1.510769507999,0.978669956752));+#5382 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5383 = PCURVE('',#5384,#5389);+#5384 = PLANE('',#5385);+#5385 = AXIS2_PLACEMENT_3D('',#5386,#5387,#5388);+#5386 = CARTESIAN_POINT('',(-0.466742292132,-2.076950799851E-02,1.07));+#5387 = DIRECTION('',(0.,1.,0.));+#5388 = DIRECTION('',(-1.,0.,0.));+#5389 = DEFINITIONAL_REPRESENTATION('',(#5390),#5393);+#5390 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5391,#5392),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.511628853934,-0.467041102818),.PIECEWISE_BEZIER_KNOTS.);+#5391 = CARTESIAN_POINT('',(0.,-5.E-02));+#5392 = CARTESIAN_POINT('',(4.458775111607E-02,-5.E-02));+#5393 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5394 = ORIENTED_EDGE('',*,*,#5395,.T.);+#5395 = EDGE_CURVE('',#5370,#5146,#5396,.T.);+#5396 = SURFACE_CURVE('',#5397,(#5401,#5407),.PCURVE_S1.);+#5397 = LINE('',#5398,#5399);+#5398 = CARTESIAN_POINT('',(-0.511330043248,0.734615246001,1.02));+#5399 = VECTOR('',#5400,1.);+#5400 = DIRECTION('',(0.,-1.,0.));+#5401 = PCURVE('',#1723,#5402);+#5402 = DEFINITIONAL_REPRESENTATION('',(#5403),#5406);+#5403 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5404,#5405),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.755384753999,0.869712320964),.PIECEWISE_BEZIER_KNOTS.);+#5404 = CARTESIAN_POINT('',(1.510769507999,0.978669956752));+#5405 = CARTESIAN_POINT('',(1.625097074963,0.978669956752));+#5406 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5407 = PCURVE('',#5408,#5413);+#5408 = PLANE('',#5409);+#5409 = AXIS2_PLACEMENT_3D('',#5410,#5411,#5412);+#5410 = CARTESIAN_POINT('',(-0.511330043248,-2.076950799851E-02,1.07));+#5411 = DIRECTION('',(-1.,0.,0.));+#5412 = DIRECTION('',(0.,-1.,0.));+#5413 = DEFINITIONAL_REPRESENTATION('',(#5414),#5417);+#5414 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5415,#5416),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.755384753999,0.869712320964),.PIECEWISE_BEZIER_KNOTS.);+#5415 = CARTESIAN_POINT('',(0.,-5.E-02));+#5416 = CARTESIAN_POINT('',(0.114327566964,-5.E-02));+#5417 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5418 = FACE_BOUND('',#5419,.T.);+#5419 = EDGE_LOOP('',(#5420,#5458,#5484,#5520,#5556,#5592,#5637,#5673,+ #5709,#5735,#5771,#5807,#5852,#5888,#5924,#5960,#5986,#6022,#6058,+ #6094,#6130,#6166,#6202,#6228,#6264,#6300,#6345,#6381));+#5420 = ORIENTED_EDGE('',*,*,#5421,.F.);+#5421 = EDGE_CURVE('',#5422,#5424,#5426,.T.);+#5422 = VERTEX_POINT('',#5423);+#5423 = CARTESIAN_POINT('',(-0.159582228888,0.139670177641,1.02));+#5424 = VERTEX_POINT('',#5425);+#5425 = CARTESIAN_POINT('',(-0.197691417876,0.15081711542,1.02));+#5426 = SURFACE_CURVE('',#5427,(#5433,#5442),.PCURVE_S1.);+#5427 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5428,#5429,#5430,#5431,#5432),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5428 = CARTESIAN_POINT('',(-0.159582228888,0.139670177641,1.02));+#5429 = CARTESIAN_POINT('',(-0.169584694187,0.143385379038,1.02));+#5430 = CARTESIAN_POINT('',(-0.179270533885,0.146481779283,1.02));+#5431 = CARTESIAN_POINT('',(-0.188639507396,0.14895909169,1.02));+#5432 = CARTESIAN_POINT('',(-0.197691417876,0.15081711542,1.02));+#5433 = PCURVE('',#1723,#5434);+#5434 = DEFINITIONAL_REPRESENTATION('',(#5435),#5441);+#5435 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5436,#5437,#5438,#5439,#5440),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5436 = CARTESIAN_POINT('',(1.350329822359,1.330417771112));+#5437 = CARTESIAN_POINT('',(1.346614620962,1.320415305813));+#5438 = CARTESIAN_POINT('',(1.343518220717,1.310729466115));+#5439 = CARTESIAN_POINT('',(1.34104090831,1.301360492604));+#5440 = CARTESIAN_POINT('',(1.33918288458,1.292308582124));+#5441 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5442 = PCURVE('',#5443,#5450);+#5443 = SURFACE_OF_LINEAR_EXTRUSION('',#5444,#5448);+#5444 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5445,#5446,#5447),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5445 = CARTESIAN_POINT('',(-0.197691417876,0.15081711542,1.07));+#5446 = CARTESIAN_POINT('',(-0.179589553106,0.147101469494,1.07));+#5447 = CARTESIAN_POINT('',(-0.159582228888,0.139670177641,1.07));+#5448 = VECTOR('',#5449,1.);+#5449 = DIRECTION('',(0.,0.,1.));+#5450 = DEFINITIONAL_REPRESENTATION('',(#5451),#5457);+#5451 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5452,#5453,#5454,#5455,#5456),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5452 = CARTESIAN_POINT('',(1.,-5.E-02));+#5453 = CARTESIAN_POINT('',(0.750029909309,-5.E-02));+#5454 = CARTESIAN_POINT('',(0.500037951917,-5.E-02));+#5455 = CARTESIAN_POINT('',(0.250027016404,-5.E-02));+#5456 = CARTESIAN_POINT('',(0.,-5.E-02));+#5457 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5458 = ORIENTED_EDGE('',*,*,#5459,.T.);+#5459 = EDGE_CURVE('',#5422,#5460,#5462,.T.);+#5460 = VERTEX_POINT('',#5461);+#5461 = CARTESIAN_POINT('',(-0.159582228888,0.100608258929,1.02));+#5462 = SURFACE_CURVE('',#5463,(#5467,#5473),.PCURVE_S1.);+#5463 = LINE('',#5464,#5465);+#5464 = CARTESIAN_POINT('',(-0.159582228888,0.814835088821,1.02));+#5465 = VECTOR('',#5466,1.);+#5466 = DIRECTION('',(0.,-1.,0.));+#5467 = PCURVE('',#1723,#5468);+#5468 = DEFINITIONAL_REPRESENTATION('',(#5469),#5472);+#5469 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5470,#5471),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.675164911179,0.714226829892),.PIECEWISE_BEZIER_KNOTS.);+#5470 = CARTESIAN_POINT('',(1.350329822359,1.330417771112));+#5471 = CARTESIAN_POINT('',(1.389391741071,1.330417771112));+#5472 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5473 = PCURVE('',#5474,#5479);+#5474 = PLANE('',#5475);+#5475 = AXIS2_PLACEMENT_3D('',#5476,#5477,#5478);+#5476 = CARTESIAN_POINT('',(-0.159582228888,0.139670177641,1.07));+#5477 = DIRECTION('',(-1.,0.,0.));+#5478 = DIRECTION('',(0.,-1.,0.));+#5479 = DEFINITIONAL_REPRESENTATION('',(#5480),#5483);+#5480 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5481,#5482),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.675164911179,0.714226829892),.PIECEWISE_BEZIER_KNOTS.);+#5481 = CARTESIAN_POINT('',(0.,-5.E-02));+#5482 = CARTESIAN_POINT('',(3.90619187128E-02,-5.E-02));+#5483 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5484 = ORIENTED_EDGE('',*,*,#5485,.F.);+#5485 = EDGE_CURVE('',#5486,#5460,#5488,.T.);+#5486 = VERTEX_POINT('',#5487);+#5487 = CARTESIAN_POINT('',(-0.194737955729,0.117566848028,1.02));+#5488 = SURFACE_CURVE('',#5489,(#5495,#5504),.PCURVE_S1.);+#5489 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5490,#5491,#5492,#5493,#5494),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5490 = CARTESIAN_POINT('',(-0.194737955729,0.117566848028,1.02));+#5491 = CARTESIAN_POINT('',(-0.185924500183,0.114708430013,1.02));+#5492 = CARTESIAN_POINT('',(-0.177127277011,0.110929006276,1.02));+#5493 = CARTESIAN_POINT('',(-0.168346462559,0.106228800088,1.02));+#5494 = CARTESIAN_POINT('',(-0.159582228888,0.100608258929,1.02));+#5495 = PCURVE('',#1723,#5496);+#5496 = DEFINITIONAL_REPRESENTATION('',(#5497),#5503);+#5497 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5498,#5499,#5500,#5501,#5502),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5498 = CARTESIAN_POINT('',(1.372433151972,1.295262044271));+#5499 = CARTESIAN_POINT('',(1.375291569987,1.304075499817));+#5500 = CARTESIAN_POINT('',(1.379070993724,1.312872722989));+#5501 = CARTESIAN_POINT('',(1.383771199912,1.321653537441));+#5502 = CARTESIAN_POINT('',(1.389391741071,1.330417771112));+#5503 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5504 = PCURVE('',#5505,#5512);+#5505 = SURFACE_OF_LINEAR_EXTRUSION('',#5506,#5510);+#5506 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5507,#5508,#5509),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5507 = CARTESIAN_POINT('',(-0.159582228888,0.100608258929,1.07));+#5508 = CARTESIAN_POINT('',(-0.177112455822,0.11185046968,1.07));+#5509 = CARTESIAN_POINT('',(-0.194737955729,0.117566848028,1.07));+#5510 = VECTOR('',#5511,1.);+#5511 = DIRECTION('',(0.,0.,1.));+#5512 = DEFINITIONAL_REPRESENTATION('',(#5513),#5519);+#5513 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5514,#5515,#5516,#5517,#5518),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5514 = CARTESIAN_POINT('',(1.,-5.E-02));+#5515 = CARTESIAN_POINT('',(0.749979983755,-5.E-02));+#5516 = CARTESIAN_POINT('',(0.499969924751,-5.E-02));+#5517 = CARTESIAN_POINT('',(0.249974906324,-5.E-02));+#5518 = CARTESIAN_POINT('',(0.,-5.E-02));+#5519 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5520 = ORIENTED_EDGE('',*,*,#5521,.F.);+#5521 = EDGE_CURVE('',#5522,#5486,#5524,.T.);+#5522 = VERTEX_POINT('',#5523);+#5523 = CARTESIAN_POINT('',(-0.230274774461,0.123283226376,1.02));+#5524 = SURFACE_CURVE('',#5525,(#5531,#5540),.PCURVE_S1.);+#5525 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5526,#5527,#5528,#5529,#5530),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5526 = CARTESIAN_POINT('',(-0.230274774461,0.123283226376,1.02));+#5527 = CARTESIAN_POINT('',(-0.221319011296,0.123283226376,1.02));+#5528 = CARTESIAN_POINT('',(-0.21241082466,0.122330474573,1.02));+#5529 = CARTESIAN_POINT('',(-0.203550411386,0.120424941755,1.02));+#5530 = CARTESIAN_POINT('',(-0.194737955729,0.117566848028,1.02));+#5531 = PCURVE('',#1723,#5532);+#5532 = DEFINITIONAL_REPRESENTATION('',(#5533),#5539);+#5533 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5534,#5535,#5536,#5537,#5538),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5534 = CARTESIAN_POINT('',(1.366716773624,1.259725225539));+#5535 = CARTESIAN_POINT('',(1.366716773624,1.268680988704));+#5536 = CARTESIAN_POINT('',(1.367669525427,1.27758917534));+#5537 = CARTESIAN_POINT('',(1.369575058245,1.286449588614));+#5538 = CARTESIAN_POINT('',(1.372433151972,1.295262044271));+#5539 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5540 = PCURVE('',#5541,#5548);+#5541 = SURFACE_OF_LINEAR_EXTRUSION('',#5542,#5546);+#5542 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5543,#5544,#5545),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5543 = CARTESIAN_POINT('',(-0.194737955729,0.117566848028,1.07));+#5544 = CARTESIAN_POINT('',(-0.212363455636,0.123283226376,1.07));+#5545 = CARTESIAN_POINT('',(-0.230274774461,0.123283226376,1.07));+#5546 = VECTOR('',#5547,1.);+#5547 = DIRECTION('',(0.,0.,1.));+#5548 = DEFINITIONAL_REPRESENTATION('',(#5549),#5555);+#5549 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5550,#5551,#5552,#5553,#5554),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5550 = CARTESIAN_POINT('',(1.,-5.E-02));+#5551 = CARTESIAN_POINT('',(0.749997103713,-5.E-02));+#5552 = CARTESIAN_POINT('',(0.499992502881,-5.E-02));+#5553 = CARTESIAN_POINT('',(0.249991651398,-5.E-02));+#5554 = CARTESIAN_POINT('',(0.,-5.E-02));+#5555 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5556 = ORIENTED_EDGE('',*,*,#5557,.F.);+#5557 = EDGE_CURVE('',#5558,#5522,#5560,.T.);+#5558 = VERTEX_POINT('',#5559);+#5559 = CARTESIAN_POINT('',(-0.273338158017,0.110611921038,1.02));+#5560 = SURFACE_CURVE('',#5561,(#5567,#5576),.PCURVE_S1.);+#5561 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5562,#5563,#5564,#5565,#5566),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5562 = CARTESIAN_POINT('',(-0.273338158017,0.110611921038,1.02));+#5563 = CARTESIAN_POINT('',(-0.265428649031,0.116949057756,1.02));+#5564 = CARTESIAN_POINT('',(-0.255612999629,0.121173149363,1.02));+#5565 = CARTESIAN_POINT('',(-0.243892982339,0.123283226376,1.02));+#5566 = CARTESIAN_POINT('',(-0.230274774461,0.123283226376,1.02));+#5567 = PCURVE('',#1723,#5568);+#5568 = DEFINITIONAL_REPRESENTATION('',(#5569),#5575);+#5569 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5570,#5571,#5572,#5573,#5574),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5570 = CARTESIAN_POINT('',(1.379388078962,1.216661841983));+#5571 = CARTESIAN_POINT('',(1.373050942244,1.224571350969));+#5572 = CARTESIAN_POINT('',(1.368826850637,1.234387000371));+#5573 = CARTESIAN_POINT('',(1.366716773624,1.246107017661));+#5574 = CARTESIAN_POINT('',(1.366716773624,1.259725225539));+#5575 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5576 = PCURVE('',#5577,#5584);+#5577 = SURFACE_OF_LINEAR_EXTRUSION('',#5578,#5582);+#5578 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5579,#5580,#5581),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5579 = CARTESIAN_POINT('',(-0.230274774461,0.123283226376,1.07));+#5580 = CARTESIAN_POINT('',(-0.257522844587,0.123283226376,1.07));+#5581 = CARTESIAN_POINT('',(-0.273338158017,0.110611921038,1.07));+#5582 = VECTOR('',#5583,1.);+#5583 = DIRECTION('',(0.,0.,1.));+#5584 = DEFINITIONAL_REPRESENTATION('',(#5585),#5591);+#5585 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5586,#5587,#5588,#5589,#5590),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5586 = CARTESIAN_POINT('',(1.,-5.E-02));+#5587 = CARTESIAN_POINT('',(0.74994144059,-5.E-02));+#5588 = CARTESIAN_POINT('',(0.499889605497,-5.E-02));+#5589 = CARTESIAN_POINT('',(0.249893071608,-5.E-02));+#5590 = CARTESIAN_POINT('',(0.,-5.E-02));+#5591 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5592 = ORIENTED_EDGE('',*,*,#5593,.F.);+#5593 = EDGE_CURVE('',#5594,#5558,#5596,.T.);+#5594 = VERTEX_POINT('',#5595);+#5595 = CARTESIAN_POINT('',(-0.289153471447,7.640892392113E-02,1.02));+#5596 = SURFACE_CURVE('',#5597,(#5606,#5618),.PCURVE_S1.);+#5597 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5598,#5599,#5600,#5601,#5602,+ #5603,#5604,#5605),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.582008491742,+ 1.),.UNSPECIFIED.);+#5598 = CARTESIAN_POINT('',(-0.289153471447,7.640892392113E-02,1.02));+#5599 = CARTESIAN_POINT('',(-0.289153471447,8.26737214208E-02,1.02));+#5600 = CARTESIAN_POINT('',(-0.288260897341,8.843938803118E-02,1.02));+#5601 = CARTESIAN_POINT('',(-0.2864751553,9.370512767044E-02,1.02));+#5602 = CARTESIAN_POINT('',(-0.281872627816,0.101893083709,1.02));+#5603 = CARTESIAN_POINT('',(-0.279488222869,0.105057538589,1.02));+#5604 = CARTESIAN_POINT('',(-0.27664330453,0.107963821723,1.02));+#5605 = CARTESIAN_POINT('',(-0.273338158017,0.110611921038,1.02));+#5606 = PCURVE('',#1723,#5607);+#5607 = DEFINITIONAL_REPRESENTATION('',(#5608),#5617);+#5608 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5609,#5610,#5611,#5612,#5613,+ #5614,#5615,#5616),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.582008491742,+ 1.),.UNSPECIFIED.);+#5609 = CARTESIAN_POINT('',(1.413591076079,1.200846528553));+#5610 = CARTESIAN_POINT('',(1.407326278579,1.200846528553));+#5611 = CARTESIAN_POINT('',(1.401560611969,1.201739102659));+#5612 = CARTESIAN_POINT('',(1.39629487233,1.2035248447));+#5613 = CARTESIAN_POINT('',(1.388106916291,1.208127372184));+#5614 = CARTESIAN_POINT('',(1.384942461411,1.210511777131));+#5615 = CARTESIAN_POINT('',(1.382036178277,1.21335669547));+#5616 = CARTESIAN_POINT('',(1.379388078962,1.216661841983));+#5617 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5618 = PCURVE('',#5619,#5626);+#5619 = SURFACE_OF_LINEAR_EXTRUSION('',#5620,#5624);+#5620 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5621,#5622,#5623),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5621 = CARTESIAN_POINT('',(-0.273338158017,0.110611921038,1.07));+#5622 = CARTESIAN_POINT('',(-0.289153471447,9.79406156994E-02,1.07));+#5623 = CARTESIAN_POINT('',(-0.289153471447,7.640892392113E-02,1.07));+#5624 = VECTOR('',#5625,1.);+#5625 = DIRECTION('',(0.,0.,1.));+#5626 = DEFINITIONAL_REPRESENTATION('',(#5627),#5636);+#5627 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5628,#5629,#5630,#5631,#5632,+ #5633,#5634,#5635),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.582008491742,+ 1.),.UNSPECIFIED.);+#5628 = CARTESIAN_POINT('',(1.,-5.E-02));+#5629 = CARTESIAN_POINT('',(0.854521475503,-5.E-02));+#5630 = CARTESIAN_POINT('',(0.709021455061,-5.E-02));+#5631 = CARTESIAN_POINT('',(0.563510699421,-5.E-02));+#5632 = CARTESIAN_POINT('',(0.313495963407,-5.E-02));+#5633 = CARTESIAN_POINT('',(0.208991954782,-5.E-02));+#5634 = CARTESIAN_POINT('',(0.104491970003,-5.E-02));+#5635 = CARTESIAN_POINT('',(0.,-5.E-02));+#5636 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5637 = ORIENTED_EDGE('',*,*,#5638,.F.);+#5638 = EDGE_CURVE('',#5639,#5594,#5641,.T.);+#5639 = VERTEX_POINT('',#5640);+#5640 = CARTESIAN_POINT('',(-0.278768717448,4.763648623512E-02,1.02));+#5641 = SURFACE_CURVE('',#5642,(#5648,#5657),.PCURVE_S1.);+#5642 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5643,#5644,#5645,#5646,#5647),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5643 = CARTESIAN_POINT('',(-0.278768717448,4.763648623512E-02,1.02));+#5644 = CARTESIAN_POINT('',(-0.283961546526,5.259111214491E-02,1.02));+#5645 = CARTESIAN_POINT('',(-0.287423413989,5.903873436614E-02,1.02));+#5646 = CARTESIAN_POINT('',(-0.289153471447,6.697890154274E-02,1.02));+#5647 = CARTESIAN_POINT('',(-0.289153471447,7.640892392113E-02,1.02));+#5648 = PCURVE('',#1723,#5649);+#5649 = DEFINITIONAL_REPRESENTATION('',(#5650),#5656);+#5650 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5651,#5652,#5653,#5654,#5655),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5651 = CARTESIAN_POINT('',(1.442363513765,1.211231282552));+#5652 = CARTESIAN_POINT('',(1.437408887855,1.206038453474));+#5653 = CARTESIAN_POINT('',(1.430961265634,1.202576586011));+#5654 = CARTESIAN_POINT('',(1.423021098457,1.200846528553));+#5655 = CARTESIAN_POINT('',(1.413591076079,1.200846528553));+#5656 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5657 = PCURVE('',#5658,#5665);+#5658 = SURFACE_OF_LINEAR_EXTRUSION('',#5659,#5663);+#5659 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5660,#5661,#5662),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5660 = CARTESIAN_POINT('',(-0.289153471447,7.640892392113E-02,1.07));+#5661 = CARTESIAN_POINT('',(-0.289153471447,5.754487537202E-02,1.07));+#5662 = CARTESIAN_POINT('',(-0.278768717448,4.763648623512E-02,1.07));+#5663 = VECTOR('',#5664,1.);+#5664 = DIRECTION('',(0.,0.,1.));+#5665 = DEFINITIONAL_REPRESENTATION('',(#5666),#5672);+#5666 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5667,#5668,#5669,#5670,#5671),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5667 = CARTESIAN_POINT('',(1.,-5.E-02));+#5668 = CARTESIAN_POINT('',(0.749978233528,-5.E-02));+#5669 = CARTESIAN_POINT('',(0.49995009456,-5.E-02));+#5670 = CARTESIAN_POINT('',(0.249946938852,-5.E-02));+#5671 = CARTESIAN_POINT('',(0.,-5.E-02));+#5672 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5673 = ORIENTED_EDGE('',*,*,#5674,.F.);+#5674 = EDGE_CURVE('',#5675,#5639,#5677,.T.);+#5675 = VERTEX_POINT('',#5676);+#5676 = CARTESIAN_POINT('',(-0.239992617653,3.10589890253E-02,1.02));+#5677 = SURFACE_CURVE('',#5678,(#5684,#5693),.PCURVE_S1.);+#5678 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5679,#5680,#5681,#5682,#5683),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5679 = CARTESIAN_POINT('',(-0.239992617653,3.10589890253E-02,1.02));+#5680 = CARTESIAN_POINT('',(-0.254177588313,3.43910291133E-02,1.02));+#5681 = CARTESIAN_POINT('',(-0.265375210535,3.826430164901E-02,1.02));+#5682 = CARTESIAN_POINT('',(-0.273573576641,4.267965463907E-02,1.02));+#5683 = CARTESIAN_POINT('',(-0.278768717448,4.763648623512E-02,1.02));+#5684 = PCURVE('',#1723,#5685);+#5685 = DEFINITIONAL_REPRESENTATION('',(#5686),#5692);+#5686 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5687,#5688,#5689,#5690,#5691),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5687 = CARTESIAN_POINT('',(1.458941010975,1.250007382347));+#5688 = CARTESIAN_POINT('',(1.455608970887,1.235822411687));+#5689 = CARTESIAN_POINT('',(1.451735698351,1.224624789465));+#5690 = CARTESIAN_POINT('',(1.447320345361,1.216426423359));+#5691 = CARTESIAN_POINT('',(1.442363513765,1.211231282552));+#5692 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5693 = PCURVE('',#5694,#5701);+#5694 = SURFACE_OF_LINEAR_EXTRUSION('',#5695,#5699);+#5695 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5696,#5697,#5698),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5696 = CARTESIAN_POINT('',(-0.278768717448,4.763648623512E-02,1.07));+#5697 = CARTESIAN_POINT('',(-0.268383963449,3.772809709821E-02,1.07));+#5698 = CARTESIAN_POINT('',(-0.239992617653,3.10589890253E-02,1.07));+#5699 = VECTOR('',#5700,1.);+#5700 = DIRECTION('',(0.,0.,1.));+#5701 = DEFINITIONAL_REPRESENTATION('',(#5702),#5708);+#5702 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5703,#5704,#5705,#5706,#5707),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5703 = CARTESIAN_POINT('',(1.,-5.E-02));+#5704 = CARTESIAN_POINT('',(0.750188477112,-5.E-02));+#5705 = CARTESIAN_POINT('',(0.500214519062,-5.E-02));+#5706 = CARTESIAN_POINT('',(0.25013307045,-5.E-02));+#5707 = CARTESIAN_POINT('',(0.,-5.E-02));+#5708 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5709 = ORIENTED_EDGE('',*,*,#5710,.T.);+#5710 = EDGE_CURVE('',#5675,#5711,#5713,.T.);+#5711 = VERTEX_POINT('',#5712);+#5712 = CARTESIAN_POINT('',(-0.219794747489,2.648588634673E-02,1.02));+#5713 = SURFACE_CURVE('',#5714,(#5718,#5724),.PCURVE_S1.);+#5714 = LINE('',#5715,#5716);+#5715 = CARTESIAN_POINT('',(-0.991627771732,0.201240533345,1.02));+#5716 = VECTOR('',#5717,1.);+#5717 = DIRECTION('',(0.975313298974,-0.220825652598,0.));+#5718 = PCURVE('',#1723,#5719);+#5719 = DEFINITIONAL_REPRESENTATION('',(#5720),#5723);+#5720 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5721,#5722),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.770660212334,0.791369322099),.PIECEWISE_BEZIER_KNOTS.);+#5721 = CARTESIAN_POINT('',(1.458941010975,1.250007382347));+#5722 = CARTESIAN_POINT('',(1.463514113653,1.270205252511));+#5723 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5724 = PCURVE('',#5725,#5730);+#5725 = PLANE('',#5726);+#5726 = AXIS2_PLACEMENT_3D('',#5727,#5728,#5729);+#5727 = CARTESIAN_POINT('',(-0.239992617653,3.10589890253E-02,1.07));+#5728 = DIRECTION('',(-0.220825652598,-0.975313298974,0.));+#5729 = DIRECTION('',(0.975313298974,-0.220825652598,0.));+#5730 = DEFINITIONAL_REPRESENTATION('',(#5731),#5734);+#5731 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5732,#5733),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.770660212334,0.791369322099),.PIECEWISE_BEZIER_KNOTS.);+#5732 = CARTESIAN_POINT('',(0.,-5.E-02));+#5733 = CARTESIAN_POINT('',(2.070910976498E-02,-5.E-02));+#5734 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5735 = ORIENTED_EDGE('',*,*,#5736,.F.);+#5736 = EDGE_CURVE('',#5737,#5711,#5739,.T.);+#5737 = VERTEX_POINT('',#5738);+#5738 = CARTESIAN_POINT('',(-0.161487688337,-2.858189174107E-03,1.02));+#5739 = SURFACE_CURVE('',#5740,(#5746,#5755),.PCURVE_S1.);+#5740 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5741,#5742,#5743,#5744,#5745),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5741 = CARTESIAN_POINT('',(-0.161487688337,-2.858189174108E-03,1.02));+#5742 = CARTESIAN_POINT('',(-0.170640803605,7.153030650355E-03,1.02));+#5743 = CARTESIAN_POINT('',(-0.183417537516,1.538068255959E-02,1.02));+#5744 = CARTESIAN_POINT('',(-0.199810268245,2.18228411898E-02,1.02));+#5745 = CARTESIAN_POINT('',(-0.219794747489,2.648588634673E-02,1.02));+#5746 = PCURVE('',#1723,#5747);+#5747 = DEFINITIONAL_REPRESENTATION('',(#5748),#5754);+#5748 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5749,#5750,#5751,#5752,#5753),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5749 = CARTESIAN_POINT('',(1.492858189174,1.328512311663));+#5750 = CARTESIAN_POINT('',(1.48284696935,1.319359196395));+#5751 = CARTESIAN_POINT('',(1.47461931744,1.306582462484));+#5752 = CARTESIAN_POINT('',(1.46817715881,1.290189731755));+#5753 = CARTESIAN_POINT('',(1.463514113653,1.270205252511));+#5754 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5755 = PCURVE('',#5756,#5763);+#5756 = SURFACE_OF_LINEAR_EXTRUSION('',#5757,#5761);+#5757 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5758,#5759,#5760),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5758 = CARTESIAN_POINT('',(-0.219794747489,2.648588634673E-02,1.07));+#5759 = CARTESIAN_POINT('',(-0.179780099051,1.714913504464E-02,1.07));+#5760 = CARTESIAN_POINT('',(-0.161487688337,-2.858189174107E-03,1.07));+#5761 = VECTOR('',#5762,1.);+#5762 = DIRECTION('',(0.,0.,1.));+#5763 = DEFINITIONAL_REPRESENTATION('',(#5764),#5770);+#5764 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5765,#5766,#5767,#5768,#5769),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5765 = CARTESIAN_POINT('',(1.,-5.E-02));+#5766 = CARTESIAN_POINT('',(0.74981112629,-5.E-02));+#5767 = CARTESIAN_POINT('',(0.499683383094,-5.E-02));+#5768 = CARTESIAN_POINT('',(0.249714542353,-5.E-02));+#5769 = CARTESIAN_POINT('',(0.,-5.E-02));+#5770 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5771 = ORIENTED_EDGE('',*,*,#5772,.F.);+#5772 = EDGE_CURVE('',#5773,#5737,#5775,.T.);+#5773 = VERTEX_POINT('',#5774);+#5774 = CARTESIAN_POINT('',(-0.143195277623,-5.735432942708E-02,1.02));+#5775 = SURFACE_CURVE('',#5776,(#5782,#5791),.PCURVE_S1.);+#5776 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5777,#5778,#5779,#5780,#5781),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5777 = CARTESIAN_POINT('',(-0.143195277623,-5.735432942708E-02,1.02));+#5778 = CARTESIAN_POINT('',(-0.143195277623,-4.012084202238E-02,1.02));+#5779 = CARTESIAN_POINT('',(-0.146240148712,-2.528645838634E-02,1.02));+#5780 = CARTESIAN_POINT('',(-0.152338993251,-1.286457442398E-02,1.02));+#5781 = CARTESIAN_POINT('',(-0.161487688337,-2.858189174108E-03,1.02));+#5782 = PCURVE('',#1723,#5783);+#5783 = DEFINITIONAL_REPRESENTATION('',(#5784),#5790);+#5784 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5785,#5786,#5787,#5788,#5789),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5785 = CARTESIAN_POINT('',(1.547354329427,1.346804722377));+#5786 = CARTESIAN_POINT('',(1.530120842022,1.346804722377));+#5787 = CARTESIAN_POINT('',(1.515286458386,1.343759851288));+#5788 = CARTESIAN_POINT('',(1.502864574424,1.337661006749));+#5789 = CARTESIAN_POINT('',(1.492858189174,1.328512311663));+#5790 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5791 = PCURVE('',#5792,#5799);+#5792 = SURFACE_OF_LINEAR_EXTRUSION('',#5793,#5797);+#5793 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5794,#5795,#5796),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5794 = CARTESIAN_POINT('',(-0.161487688337,-2.858189174107E-03,1.07));+#5795 = CARTESIAN_POINT('',(-0.143195277623,-2.286551339286E-02,1.07));+#5796 = CARTESIAN_POINT('',(-0.143195277623,-5.735432942708E-02,1.07));+#5797 = VECTOR('',#5798,1.);+#5798 = DIRECTION('',(0.,0.,1.));+#5799 = DEFINITIONAL_REPRESENTATION('',(#5800),#5806);+#5800 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5801,#5802,#5803,#5804,#5805),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5801 = CARTESIAN_POINT('',(1.,-5.E-02));+#5802 = CARTESIAN_POINT('',(0.750158321068,-5.E-02));+#5803 = CARTESIAN_POINT('',(0.500151093157,-5.E-02));+#5804 = CARTESIAN_POINT('',(0.250068053591,-5.E-02));+#5805 = CARTESIAN_POINT('',(0.,-5.E-02));+#5806 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5807 = ORIENTED_EDGE('',*,*,#5808,.F.);+#5808 = EDGE_CURVE('',#5809,#5773,#5811,.T.);+#5809 = VERTEX_POINT('',#5810);+#5810 = CARTESIAN_POINT('',(-0.168347342355,-0.119281761533,1.02));+#5811 = SURFACE_CURVE('',#5812,(#5821,#5833),.PCURVE_S1.);+#5812 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5813,#5814,#5815,#5816,#5817,+ #5818,#5819,#5820),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.221935848941,+ 1.),.UNSPECIFIED.);+#5813 = CARTESIAN_POINT('',(-0.168347342355,-0.119281761533,1.02));+#5814 = CARTESIAN_POINT('',(-0.165555645461,-0.116913049017,1.02));+#5815 = CARTESIAN_POINT('',(-0.162970338071,-0.114386122649,1.02));+#5816 = CARTESIAN_POINT('',(-0.160591572536,-0.111701013574,1.02));+#5817 = CARTESIAN_POINT('',(-0.150804273305,-9.88901121059E-02,1.02));+#5818 = CARTESIAN_POINT('',(-0.145728542532,-8.697937841774E-02,1.02));+#5819 = CARTESIAN_POINT('',(-0.143195277623,-7.312967312328E-02,1.02));+#5820 = CARTESIAN_POINT('',(-0.143195277623,-5.735432942708E-02,1.02));+#5821 = PCURVE('',#1723,#5822);+#5822 = DEFINITIONAL_REPRESENTATION('',(#5823),#5832);+#5823 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5824,#5825,#5826,#5827,#5828,+ #5829,#5830,#5831),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.221935848941,+ 1.),.UNSPECIFIED.);+#5824 = CARTESIAN_POINT('',(1.609281761533,1.321652657645));+#5825 = CARTESIAN_POINT('',(1.606913049017,1.324444354539));+#5826 = CARTESIAN_POINT('',(1.604386122649,1.327029661929));+#5827 = CARTESIAN_POINT('',(1.601701013574,1.329408427464));+#5828 = CARTESIAN_POINT('',(1.588890112106,1.339195726695));+#5829 = CARTESIAN_POINT('',(1.576979378418,1.344271457468));+#5830 = CARTESIAN_POINT('',(1.563129673123,1.346804722377));+#5831 = CARTESIAN_POINT('',(1.547354329427,1.346804722377));+#5832 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5833 = PCURVE('',#5834,#5841);+#5834 = SURFACE_OF_LINEAR_EXTRUSION('',#5835,#5839);+#5835 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5836,#5837,#5838),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5836 = CARTESIAN_POINT('',(-0.143195277623,-5.735432942708E-02,1.07));+#5837 = CARTESIAN_POINT('',(-0.143195277623,-9.794061569941E-02,1.07));+#5838 = CARTESIAN_POINT('',(-0.168347342355,-0.119281761533,1.07));+#5839 = VECTOR('',#5840,1.);+#5840 = DIRECTION('',(0.,0.,1.));+#5841 = DEFINITIONAL_REPRESENTATION('',(#5842),#5851);+#5842 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5843,#5844,#5845,#5846,#5847,+ #5848,#5849,#5850),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.221935848941,+ 1.),.UNSPECIFIED.);+#5843 = CARTESIAN_POINT('',(1.,-5.E-02));+#5844 = CARTESIAN_POINT('',(0.944503623789,-5.E-02));+#5845 = CARTESIAN_POINT('',(0.889003618146,-5.E-02));+#5846 = CARTESIAN_POINT('',(0.833501802852,-5.E-02));+#5847 = CARTESIAN_POINT('',(0.583421416485,-5.E-02));+#5848 = CARTESIAN_POINT('',(0.388842924212,-5.E-02));+#5849 = CARTESIAN_POINT('',(0.194343276327,-5.E-02));+#5850 = CARTESIAN_POINT('',(0.,-5.E-02));+#5851 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5852 = ORIENTED_EDGE('',*,*,#5853,.F.);+#5853 = EDGE_CURVE('',#5854,#5809,#5856,.T.);+#5854 = VERTEX_POINT('',#5855);+#5855 = CARTESIAN_POINT('',(-0.241516985212,-0.140622907366,1.02));+#5856 = SURFACE_CURVE('',#5857,(#5863,#5872),.PCURVE_S1.);+#5857 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5858,#5859,#5860,#5861,#5862),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5858 = CARTESIAN_POINT('',(-0.241516985212,-0.140622907366,1.02));+#5859 = CARTESIAN_POINT('',(-0.217544957715,-0.140622907366,1.02));+#5860 = CARTESIAN_POINT('',(-0.197337425691,-0.137076954783,1.02));+#5861 = CARTESIAN_POINT('',(-0.180934528234,-0.129961798037,1.02));+#5862 = CARTESIAN_POINT('',(-0.168347342355,-0.119281761533,1.02));+#5863 = PCURVE('',#1723,#5864);+#5864 = DEFINITIONAL_REPRESENTATION('',(#5865),#5871);+#5865 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5866,#5867,#5868,#5869,#5870),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5866 = CARTESIAN_POINT('',(1.630622907366,1.248483014788));+#5867 = CARTESIAN_POINT('',(1.630622907366,1.272455042285));+#5868 = CARTESIAN_POINT('',(1.627076954783,1.292662574309));+#5869 = CARTESIAN_POINT('',(1.619961798037,1.309065471766));+#5870 = CARTESIAN_POINT('',(1.609281761533,1.321652657645));+#5871 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5872 = PCURVE('',#5873,#5880);+#5873 = SURFACE_OF_LINEAR_EXTRUSION('',#5874,#5878);+#5874 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5875,#5876,#5877),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5875 = CARTESIAN_POINT('',(-0.168347342355,-0.119281761533,1.07));+#5876 = CARTESIAN_POINT('',(-0.193499407087,-0.140622907366,1.07));+#5877 = CARTESIAN_POINT('',(-0.241516985212,-0.140622907366,1.07));+#5878 = VECTOR('',#5879,1.);+#5879 = DIRECTION('',(0.,0.,1.));+#5880 = DEFINITIONAL_REPRESENTATION('',(#5881),#5887);+#5881 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5882,#5883,#5884,#5885,#5886),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5882 = CARTESIAN_POINT('',(1.,-5.E-02));+#5883 = CARTESIAN_POINT('',(0.750382792789,-5.E-02));+#5884 = CARTESIAN_POINT('',(0.500403848916,-5.E-02));+#5885 = CARTESIAN_POINT('',(0.250221721627,-5.E-02));+#5886 = CARTESIAN_POINT('',(0.,-5.E-02));+#5887 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5888 = ORIENTED_EDGE('',*,*,#5889,.F.);+#5889 = EDGE_CURVE('',#5890,#5854,#5892,.T.);+#5890 = VERTEX_POINT('',#5891);+#5891 = CARTESIAN_POINT('',(-0.281722179594,-0.136335623605,1.02));+#5892 = SURFACE_CURVE('',#5893,(#5899,#5908),.PCURVE_S1.);+#5893 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5894,#5895,#5896,#5897,#5898),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5894 = CARTESIAN_POINT('',(-0.281722179594,-0.136335623605,1.02));+#5895 = CARTESIAN_POINT('',(-0.271623568958,-0.138479196617,1.02));+#5896 = CARTESIAN_POINT('',(-0.261556415139,-0.139908331674,1.02));+#5897 = CARTESIAN_POINT('',(-0.251520846099,-0.140622907366,1.02));+#5898 = CARTESIAN_POINT('',(-0.241516985212,-0.140622907366,1.02));+#5899 = PCURVE('',#1723,#5900);+#5900 = DEFINITIONAL_REPRESENTATION('',(#5901),#5907);+#5901 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5902,#5903,#5904,#5905,#5906),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5902 = CARTESIAN_POINT('',(1.626335623605,1.208277820406));+#5903 = CARTESIAN_POINT('',(1.628479196617,1.218376431042));+#5904 = CARTESIAN_POINT('',(1.629908331674,1.228443584861));+#5905 = CARTESIAN_POINT('',(1.630622907366,1.238479153901));+#5906 = CARTESIAN_POINT('',(1.630622907366,1.248483014788));+#5907 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5908 = PCURVE('',#5909,#5916);+#5909 = SURFACE_OF_LINEAR_EXTRUSION('',#5910,#5914);+#5910 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5911,#5912,#5913),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5911 = CARTESIAN_POINT('',(-0.241516985212,-0.140622907366,1.07));+#5912 = CARTESIAN_POINT('',(-0.261524309431,-0.140622907366,1.07));+#5913 = CARTESIAN_POINT('',(-0.281722179594,-0.136335623605,1.07));+#5914 = VECTOR('',#5915,1.);+#5915 = DIRECTION('',(0.,0.,1.));+#5916 = DEFINITIONAL_REPRESENTATION('',(#5917),#5923);+#5917 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5918,#5919,#5920,#5921,#5922),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5918 = CARTESIAN_POINT('',(1.,-5.E-02));+#5919 = CARTESIAN_POINT('',(0.750008031664,-5.E-02));+#5920 = CARTESIAN_POINT('',(0.500008666549,-5.E-02));+#5921 = CARTESIAN_POINT('',(0.250004967621,-5.E-02));+#5922 = CARTESIAN_POINT('',(0.,-5.E-02));+#5923 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5924 = ORIENTED_EDGE('',*,*,#5925,.F.);+#5925 = EDGE_CURVE('',#5926,#5890,#5928,.T.);+#5926 = VERTEX_POINT('',#5927);+#5927 = CARTESIAN_POINT('',(-0.322308465867,-0.123473772321,1.02));+#5928 = SURFACE_CURVE('',#5929,(#5935,#5944),.PCURVE_S1.);+#5929 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5930,#5931,#5932,#5933,#5934),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5930 = CARTESIAN_POINT('',(-0.322308465867,-0.123473772321,1.02));+#5931 = CARTESIAN_POINT('',(-0.312114960023,-0.12776076076,1.02));+#5932 = CARTESIAN_POINT('',(-0.301952656135,-0.131333532214,1.02));+#5933 = CARTESIAN_POINT('',(-0.29182168666,-0.134191860313,1.02));+#5934 = CARTESIAN_POINT('',(-0.281722179594,-0.136335623605,1.02));+#5935 = PCURVE('',#1723,#5936);+#5936 = DEFINITIONAL_REPRESENTATION('',(#5937),#5943);+#5937 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5938,#5939,#5940,#5941,#5942),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5938 = CARTESIAN_POINT('',(1.613473772321,1.167691534133));+#5939 = CARTESIAN_POINT('',(1.61776076076,1.177885039977));+#5940 = CARTESIAN_POINT('',(1.621333532214,1.188047343865));+#5941 = CARTESIAN_POINT('',(1.624191860313,1.19817831334));+#5942 = CARTESIAN_POINT('',(1.626335623605,1.208277820406));+#5943 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5944 = PCURVE('',#5945,#5952);+#5945 = SURFACE_OF_LINEAR_EXTRUSION('',#5946,#5950);+#5946 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5947,#5948,#5949),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5947 = CARTESIAN_POINT('',(-0.281722179594,-0.136335623605,1.07));+#5948 = CARTESIAN_POINT('',(-0.301920049758,-0.132048339844,1.07));+#5949 = CARTESIAN_POINT('',(-0.322308465867,-0.123473772321,1.07));+#5950 = VECTOR('',#5951,1.);+#5951 = DIRECTION('',(0.,0.,1.));+#5952 = DEFINITIONAL_REPRESENTATION('',(#5953),#5959);+#5953 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5954,#5955,#5956,#5957,#5958),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5954 = CARTESIAN_POINT('',(1.,-5.E-02));+#5955 = CARTESIAN_POINT('',(0.750017220819,-5.E-02));+#5956 = CARTESIAN_POINT('',(0.500020921055,-5.E-02));+#5957 = CARTESIAN_POINT('',(0.250014159494,-5.E-02));+#5958 = CARTESIAN_POINT('',(0.,-5.E-02));+#5959 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5960 = ORIENTED_EDGE('',*,*,#5961,.T.);+#5961 = EDGE_CURVE('',#5926,#5962,#5964,.T.);+#5962 = VERTEX_POINT('',#5963);+#5963 = CARTESIAN_POINT('',(-0.322308465867,-8.250639415923E-02,1.02));+#5964 = SURFACE_CURVE('',#5965,(#5969,#5975),.PCURVE_S1.);+#5965 = LINE('',#5966,#5967);+#5966 = CARTESIAN_POINT('',(-0.322308465867,0.683263113839,1.02));+#5967 = VECTOR('',#5968,1.);+#5968 = DIRECTION('',(0.,1.,0.));+#5969 = PCURVE('',#1723,#5970);+#5970 = DEFINITIONAL_REPRESENTATION('',(#5971),#5974);+#5971 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5972,#5973),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.806736886161,-0.765769507999),.PIECEWISE_BEZIER_KNOTS.);+#5972 = CARTESIAN_POINT('',(1.613473772321,1.167691534133));+#5973 = CARTESIAN_POINT('',(1.572506394159,1.167691534133));+#5974 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5975 = PCURVE('',#5976,#5981);+#5976 = PLANE('',#5977);+#5977 = AXIS2_PLACEMENT_3D('',#5978,#5979,#5980);+#5978 = CARTESIAN_POINT('',(-0.322308465867,-0.123473772321,1.07));+#5979 = DIRECTION('',(1.,0.,0.));+#5980 = DIRECTION('',(0.,1.,0.));+#5981 = DEFINITIONAL_REPRESENTATION('',(#5982),#5985);+#5982 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5983,#5984),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.806736886161,-0.765769507999),.PIECEWISE_BEZIER_KNOTS.);+#5983 = CARTESIAN_POINT('',(0.,-5.E-02));+#5984 = CARTESIAN_POINT('',(4.09673781622E-02,-5.E-02));+#5985 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5986 = ORIENTED_EDGE('',*,*,#5987,.F.);+#5987 = EDGE_CURVE('',#5988,#5962,#5990,.T.);+#5988 = VERTEX_POINT('',#5989);+#5989 = CARTESIAN_POINT('',(-0.280864722842,-0.102894810268,1.02));+#5990 = SURFACE_CURVE('',#5991,(#5997,#6006),.PCURVE_S1.);+#5991 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5992,#5993,#5994,#5995,#5996),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5992 = CARTESIAN_POINT('',(-0.280864722842,-0.102894810268,1.02));+#5993 = CARTESIAN_POINT('',(-0.290632443687,-9.965478579248E-02,1.02));+#5994 = CARTESIAN_POINT('',(-0.300796086476,-9.517605236993E-02,1.02));+#5995 = CARTESIAN_POINT('',(-0.311355030542,-8.945944440871E-02,1.02));+#5996 = CARTESIAN_POINT('',(-0.322308465867,-8.250639415923E-02,1.02));+#5997 = PCURVE('',#1723,#5998);+#5998 = DEFINITIONAL_REPRESENTATION('',(#5999),#6005);+#5999 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6000,#6001,#6002,#6003,#6004),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6000 = CARTESIAN_POINT('',(1.592894810268,1.209135277158));+#6001 = CARTESIAN_POINT('',(1.589654785792,1.199367556313));+#6002 = CARTESIAN_POINT('',(1.58517605237,1.189203913524));+#6003 = CARTESIAN_POINT('',(1.579459444409,1.178644969458));+#6004 = CARTESIAN_POINT('',(1.572506394159,1.167691534133));+#6005 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6006 = PCURVE('',#6007,#6014);+#6007 = SURFACE_OF_LINEAR_EXTRUSION('',#6008,#6012);+#6008 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6009,#6010,#6011),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6009 = CARTESIAN_POINT('',(-0.322308465867,-8.250639415923E-02,1.07));+#6010 = CARTESIAN_POINT('',(-0.300395682199,-9.641624813988E-02,1.07));+#6011 = CARTESIAN_POINT('',(-0.280864722842,-0.102894810268,1.07));+#6012 = VECTOR('',#6013,1.);+#6013 = DIRECTION('',(0.,0.,1.));+#6014 = DEFINITIONAL_REPRESENTATION('',(#6015),#6021);+#6015 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6016,#6017,#6018,#6019,#6020),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6016 = CARTESIAN_POINT('',(1.,-5.E-02));+#6017 = CARTESIAN_POINT('',(0.749942625279,-5.E-02));+#6018 = CARTESIAN_POINT('',(0.499916765488,-5.E-02));+#6019 = CARTESIAN_POINT('',(0.249932539161,-5.E-02));+#6020 = CARTESIAN_POINT('',(0.,-5.E-02));+#6021 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6022 = ORIENTED_EDGE('',*,*,#6023,.F.);+#6023 = EDGE_CURVE('',#6024,#5988,#6026,.T.);+#6024 = VERTEX_POINT('',#6025);+#6025 = CARTESIAN_POINT('',(-0.241516985212,-0.109373372396,1.02));+#6026 = SURFACE_CURVE('',#6027,(#6033,#6042),.PCURVE_S1.);+#6027 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6028,#6029,#6030,#6031,#6032),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6028 = CARTESIAN_POINT('',(-0.241516985212,-0.109373372396,1.02));+#6029 = CARTESIAN_POINT('',(-0.251425539629,-0.109373372396,1.02));+#6030 = CARTESIAN_POINT('',(-0.261286530696,-0.108293576012,1.02));+#6031 = CARTESIAN_POINT('',(-0.271099679378,-0.106133946637,1.02));+#6032 = CARTESIAN_POINT('',(-0.280864722842,-0.102894810268,1.02));+#6033 = PCURVE('',#1723,#6034);+#6034 = DEFINITIONAL_REPRESENTATION('',(#6035),#6041);+#6035 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6036,#6037,#6038,#6039,#6040),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6036 = CARTESIAN_POINT('',(1.599373372396,1.248483014788));+#6037 = CARTESIAN_POINT('',(1.599373372396,1.238574460371));+#6038 = CARTESIAN_POINT('',(1.598293576012,1.228713469304));+#6039 = CARTESIAN_POINT('',(1.596133946637,1.218900320622));+#6040 = CARTESIAN_POINT('',(1.592894810268,1.209135277158));+#6041 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6042 = PCURVE('',#6043,#6050);+#6043 = SURFACE_OF_LINEAR_EXTRUSION('',#6044,#6048);+#6044 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6045,#6046,#6047),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6045 = CARTESIAN_POINT('',(-0.280864722842,-0.102894810268,1.07));+#6046 = CARTESIAN_POINT('',(-0.261333763486,-0.109373372396,1.07));+#6047 = CARTESIAN_POINT('',(-0.241516985212,-0.109373372396,1.07));+#6048 = VECTOR('',#6049,1.);+#6049 = DIRECTION('',(0.,0.,1.));+#6050 = DEFINITIONAL_REPRESENTATION('',(#6051),#6057);+#6051 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6052,#6053,#6054,#6055,#6056),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6052 = CARTESIAN_POINT('',(1.,-5.E-02));+#6053 = CARTESIAN_POINT('',(0.749995829787,-5.E-02));+#6054 = CARTESIAN_POINT('',(0.499989774166,-5.E-02));+#6055 = CARTESIAN_POINT('',(0.249988832761,-5.E-02));+#6056 = CARTESIAN_POINT('',(0.,-5.E-02));+#6057 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6058 = ORIENTED_EDGE('',*,*,#6059,.F.);+#6059 = EDGE_CURVE('',#6060,#6024,#6062,.T.);+#6060 = VERTEX_POINT('',#6061);+#6061 = CARTESIAN_POINT('',(-0.196167050316,-9.632097516741E-02,1.02));+#6062 = SURFACE_CURVE('',#6063,(#6069,#6078),.PCURVE_S1.);+#6063 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6064,#6065,#6066,#6067,#6068),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6064 = CARTESIAN_POINT('',(-0.196167050316,-9.632097516741E-02,1.02));+#6065 = CARTESIAN_POINT('',(-0.204267713775,-0.102849156896,1.02));+#6066 = CARTESIAN_POINT('',(-0.214528786889,-0.107200272677,1.02));+#6067 = CARTESIAN_POINT('',(-0.226947922499,-0.109373372396,1.02));+#6068 = CARTESIAN_POINT('',(-0.241516985212,-0.109373372396,1.02));+#6069 = PCURVE('',#1723,#6070);+#6070 = DEFINITIONAL_REPRESENTATION('',(#6071),#6077);+#6071 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6072,#6073,#6074,#6075,#6076),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6072 = CARTESIAN_POINT('',(1.586320975167,1.293832949684));+#6073 = CARTESIAN_POINT('',(1.592849156896,1.285732286225));+#6074 = CARTESIAN_POINT('',(1.597200272677,1.275471213111));+#6075 = CARTESIAN_POINT('',(1.599373372396,1.263052077501));+#6076 = CARTESIAN_POINT('',(1.599373372396,1.248483014788));+#6077 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6078 = PCURVE('',#6079,#6086);+#6079 = SURFACE_OF_LINEAR_EXTRUSION('',#6080,#6084);+#6080 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6081,#6082,#6083),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6081 = CARTESIAN_POINT('',(-0.241516985212,-0.109373372396,1.07));+#6082 = CARTESIAN_POINT('',(-0.212363455636,-0.109373372396,1.07));+#6083 = CARTESIAN_POINT('',(-0.196167050316,-9.632097516741E-02,1.07));+#6084 = VECTOR('',#6085,1.);+#6085 = DIRECTION('',(0.,0.,1.));+#6086 = DEFINITIONAL_REPRESENTATION('',(#6087),#6093);+#6087 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6088,#6089,#6090,#6091,#6092),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6088 = CARTESIAN_POINT('',(1.,-5.E-02));+#6089 = CARTESIAN_POINT('',(0.749924032565,-5.E-02));+#6090 = CARTESIAN_POINT('',(0.499861190459,-5.E-02));+#6091 = CARTESIAN_POINT('',(0.249867904937,-5.E-02));+#6092 = CARTESIAN_POINT('',(0.,-5.E-02));+#6093 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6094 = ORIENTED_EDGE('',*,*,#6095,.F.);+#6095 = EDGE_CURVE('',#6096,#6060,#6098,.T.);+#6096 = VERTEX_POINT('',#6097);+#6097 = CARTESIAN_POINT('',(-0.179970644996,-5.983142671131E-02,1.02));+#6098 = SURFACE_CURVE('',#6099,(#6105,#6114),.PCURVE_S1.);+#6099 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6100,#6101,#6102,#6103,#6104),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6100 = CARTESIAN_POINT('',(-0.179970644996,-5.983142671131E-02,1.02));+#6101 = CARTESIAN_POINT('',(-0.179970644996,-7.154719542337E-02,1.02));+#6102 = CARTESIAN_POINT('',(-0.182668752269,-8.153679536749E-02,1.02));+#6103 = CARTESIAN_POINT('',(-0.188068902636,-8.979482086053E-02,1.02));+#6104 = CARTESIAN_POINT('',(-0.196167050316,-9.632097516741E-02,1.02));+#6105 = PCURVE('',#1723,#6106);+#6106 = DEFINITIONAL_REPRESENTATION('',(#6107),#6113);+#6107 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6108,#6109,#6110,#6111,#6112),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6108 = CARTESIAN_POINT('',(1.549831426711,1.310029355004));+#6109 = CARTESIAN_POINT('',(1.561547195423,1.310029355004));+#6110 = CARTESIAN_POINT('',(1.571536795367,1.307331247731));+#6111 = CARTESIAN_POINT('',(1.579794820861,1.301931097364));+#6112 = CARTESIAN_POINT('',(1.586320975167,1.293832949684));+#6113 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6114 = PCURVE('',#6115,#6122);+#6115 = SURFACE_OF_LINEAR_EXTRUSION('',#6116,#6120);+#6116 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6117,#6118,#6119),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6117 = CARTESIAN_POINT('',(-0.196167050316,-9.632097516741E-02,1.07));+#6118 = CARTESIAN_POINT('',(-0.179970644996,-8.326857793899E-02,1.07));+#6119 = CARTESIAN_POINT('',(-0.179970644996,-5.983142671131E-02,1.07));+#6120 = VECTOR('',#6121,1.);+#6121 = DIRECTION('',(0.,0.,1.));+#6122 = DEFINITIONAL_REPRESENTATION('',(#6123),#6129);+#6123 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6124,#6125,#6126,#6127,#6128),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6124 = CARTESIAN_POINT('',(1.,-5.E-02));+#6125 = CARTESIAN_POINT('',(0.750059881462,-5.E-02));+#6126 = CARTESIAN_POINT('',(0.500038820265,-5.E-02));+#6127 = CARTESIAN_POINT('',(0.249998302713,-5.E-02));+#6128 = CARTESIAN_POINT('',(0.,-5.E-02));+#6129 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6130 = ORIENTED_EDGE('',*,*,#6131,.F.);+#6131 = EDGE_CURVE('',#6132,#6096,#6134,.T.);+#6132 = VERTEX_POINT('',#6133);+#6133 = CARTESIAN_POINT('',(-0.191117582775,-2.724807012649E-02,1.02));+#6134 = SURFACE_CURVE('',#6135,(#6141,#6150),.PCURVE_S1.);+#6135 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6136,#6137,#6138,#6139,#6140),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6136 = CARTESIAN_POINT('',(-0.191117582775,-2.724807012649E-02,1.02));+#6137 = CARTESIAN_POINT('',(-0.185543393593,-3.286990195125E-02,1.02));+#6138 = CARTESIAN_POINT('',(-0.18182742817,-4.017540559042E-02,1.02));+#6139 = CARTESIAN_POINT('',(-0.179970644996,-4.91638390138E-02,1.02));+#6140 = CARTESIAN_POINT('',(-0.179970644996,-5.983142671131E-02,1.02));+#6141 = PCURVE('',#1723,#6142);+#6142 = DEFINITIONAL_REPRESENTATION('',(#6143),#6149);+#6143 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6144,#6145,#6146,#6147,#6148),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6144 = CARTESIAN_POINT('',(1.517248070126,1.298882417225));+#6145 = CARTESIAN_POINT('',(1.522869901951,1.304456606407));+#6146 = CARTESIAN_POINT('',(1.53017540559,1.30817257183));+#6147 = CARTESIAN_POINT('',(1.539163839014,1.310029355004));+#6148 = CARTESIAN_POINT('',(1.549831426711,1.310029355004));+#6149 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6150 = PCURVE('',#6151,#6158);+#6151 = SURFACE_OF_LINEAR_EXTRUSION('',#6152,#6156);+#6152 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6153,#6154,#6155),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6153 = CARTESIAN_POINT('',(-0.179970644996,-5.983142671131E-02,1.07));+#6154 = CARTESIAN_POINT('',(-0.179970644996,-3.849028087798E-02,1.07));+#6155 = CARTESIAN_POINT('',(-0.191117582775,-2.724807012649E-02,1.07));+#6156 = VECTOR('',#6157,1.);+#6157 = DIRECTION('',(0.,0.,1.));+#6158 = DEFINITIONAL_REPRESENTATION('',(#6159),#6165);+#6159 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6160,#6161,#6162,#6163,#6164),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6160 = CARTESIAN_POINT('',(1.,-5.E-02));+#6161 = CARTESIAN_POINT('',(0.749967691007,-5.E-02));+#6162 = CARTESIAN_POINT('',(0.499931800818,-5.E-02));+#6163 = CARTESIAN_POINT('',(0.249930059539,-5.E-02));+#6164 = CARTESIAN_POINT('',(0.,-5.E-02));+#6165 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6166 = ORIENTED_EDGE('',*,*,#6167,.F.);+#6167 = EDGE_CURVE('',#6168,#6132,#6170,.T.);+#6168 = VERTEX_POINT('',#6169);+#6169 = CARTESIAN_POINT('',(-0.229893682571,-9.908389136905E-03,1.02));+#6170 = SURFACE_CURVE('',#6171,(#6177,#6186),.PCURVE_S1.);+#6171 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6172,#6173,#6174,#6175,#6176),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6172 = CARTESIAN_POINT('',(-0.229893682571,-9.908389136905E-03,1.02));+#6173 = CARTESIAN_POINT('',(-0.216088046306,-1.295515024364E-02,1.02));+#6174 = CARTESIAN_POINT('',(-0.205018112679,-1.685997350956E-02,1.02));+#6175 = CARTESIAN_POINT('',(-0.196693559246,-2.162443573753E-02,1.02));+#6176 = CARTESIAN_POINT('',(-0.191117582775,-2.724807012649E-02,1.02));+#6177 = PCURVE('',#1723,#6178);+#6178 = DEFINITIONAL_REPRESENTATION('',(#6179),#6185);+#6179 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6180,#6181,#6182,#6183,#6184),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6180 = CARTESIAN_POINT('',(1.499908389137,1.260106317429));+#6181 = CARTESIAN_POINT('',(1.502955150244,1.273911953694));+#6182 = CARTESIAN_POINT('',(1.50685997351,1.284981887321));+#6183 = CARTESIAN_POINT('',(1.511624435738,1.293306440754));+#6184 = CARTESIAN_POINT('',(1.517248070126,1.298882417225));+#6185 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6186 = PCURVE('',#6187,#6194);+#6187 = SURFACE_OF_LINEAR_EXTRUSION('',#6188,#6192);+#6188 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6189,#6190,#6191),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6189 = CARTESIAN_POINT('',(-0.191117582775,-2.724807012649E-02,1.07));+#6190 = CARTESIAN_POINT('',(-0.202264520554,-1.6005859375E-02,1.07));+#6191 = CARTESIAN_POINT('',(-0.229893682571,-9.908389136905E-03,1.07));+#6192 = VECTOR('',#6193,1.);+#6193 = DIRECTION('',(0.,0.,1.));+#6194 = DEFINITIONAL_REPRESENTATION('',(#6195),#6201);+#6195 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6196,#6197,#6198,#6199,#6200),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6196 = CARTESIAN_POINT('',(1.,-5.E-02));+#6197 = CARTESIAN_POINT('',(0.750161871419,-5.E-02));+#6198 = CARTESIAN_POINT('',(0.500183017094,-5.E-02));+#6199 = CARTESIAN_POINT('',(0.250112478465,-5.E-02));+#6200 = CARTESIAN_POINT('',(0.,-5.E-02));+#6201 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6202 = ORIENTED_EDGE('',*,*,#6203,.T.);+#6203 = EDGE_CURVE('',#6168,#6204,#6206,.T.);+#6204 = VERTEX_POINT('',#6205);+#6205 = CARTESIAN_POINT('',(-0.250472644624,-5.144740513393E-03,1.02));+#6206 = SURFACE_CURVE('',#6207,(#6211,#6217),.PCURVE_S1.);+#6207 = LINE('',#6208,#6209);+#6208 = CARTESIAN_POINT('',(-0.992674736243,0.166661299213,1.02));+#6209 = VECTOR('',#6210,1.);+#6210 = DIRECTION('',(-0.97423893818,0.225518272727,0.));+#6211 = PCURVE('',#1723,#6212);+#6212 = DEFINITIONAL_REPRESENTATION('',(#6213),#6216);+#6213 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6214,#6215),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.782950694927,-0.761827578977),.PIECEWISE_BEZIER_KNOTS.);+#6214 = CARTESIAN_POINT('',(1.499908389137,1.260106317429));+#6215 = CARTESIAN_POINT('',(1.495144740513,1.239527355376));+#6216 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6217 = PCURVE('',#6218,#6223);+#6218 = PLANE('',#6219);+#6219 = AXIS2_PLACEMENT_3D('',#6220,#6221,#6222);+#6220 = CARTESIAN_POINT('',(-0.229893682571,-9.908389136905E-03,1.07));+#6221 = DIRECTION('',(0.225518272727,0.97423893818,0.));+#6222 = DIRECTION('',(-0.97423893818,0.225518272727,0.));+#6223 = DEFINITIONAL_REPRESENTATION('',(#6224),#6227);+#6224 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6225,#6226),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.782950694927,-0.761827578977),.PIECEWISE_BEZIER_KNOTS.);+#6225 = CARTESIAN_POINT('',(0.,-5.E-02));+#6226 = CARTESIAN_POINT('',(2.112311594937E-02,-5.E-02));+#6227 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6228 = ORIENTED_EDGE('',*,*,#6229,.F.);+#6229 = EDGE_CURVE('',#6230,#6204,#6232,.T.);+#6230 = VERTEX_POINT('',#6231);+#6231 = CARTESIAN_POINT('',(-0.308017519996,2.191278366815E-02,1.02));+#6232 = SURFACE_CURVE('',#6233,(#6239,#6248),.PCURVE_S1.);+#6233 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6234,#6235,#6236,#6237,#6238),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6234 = CARTESIAN_POINT('',(-0.308017519996,2.191278366815E-02,1.02));+#6235 = CARTESIAN_POINT('',(-0.299054564386,1.285447746609E-02,1.02));+#6236 = CARTESIAN_POINT('',(-0.286467988867,5.325720166274E-03,1.02));+#6237 = CARTESIAN_POINT('',(-0.270266022866,-6.721983145006E-04,1.02));+#6238 = CARTESIAN_POINT('',(-0.250472644624,-5.144740513393E-03,1.02));+#6239 = PCURVE('',#1723,#6240);+#6240 = DEFINITIONAL_REPRESENTATION('',(#6241),#6247);+#6241 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6242,#6243,#6244,#6245,#6246),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6242 = CARTESIAN_POINT('',(1.468087216332,1.181982480004));+#6243 = CARTESIAN_POINT('',(1.477145522534,1.190945435614));+#6244 = CARTESIAN_POINT('',(1.484674279834,1.203532011133));+#6245 = CARTESIAN_POINT('',(1.490672198315,1.219733977134));+#6246 = CARTESIAN_POINT('',(1.495144740513,1.239527355376));+#6247 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6248 = PCURVE('',#6249,#6256);+#6249 = SURFACE_OF_LINEAR_EXTRUSION('',#6250,#6254);+#6250 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6251,#6252,#6253),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6251 = CARTESIAN_POINT('',(-0.250472644624,-5.144740513393E-03,1.07));+#6252 = CARTESIAN_POINT('',(-0.290106201172,3.810918898809E-03,1.07));+#6253 = CARTESIAN_POINT('',(-0.308017519996,2.191278366815E-02,1.07));+#6254 = VECTOR('',#6255,1.);+#6255 = DIRECTION('',(0.,0.,1.));+#6256 = DEFINITIONAL_REPRESENTATION('',(#6257),#6263);+#6257 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6258,#6259,#6260,#6261,#6262),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6258 = CARTESIAN_POINT('',(1.,-5.E-02));+#6259 = CARTESIAN_POINT('',(0.749796324371,-5.E-02));+#6260 = CARTESIAN_POINT('',(0.499667018625,-5.E-02));+#6261 = CARTESIAN_POINT('',(0.249704795205,-5.E-02));+#6262 = CARTESIAN_POINT('',(0.,-5.E-02));+#6263 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6264 = ORIENTED_EDGE('',*,*,#6265,.F.);+#6265 = EDGE_CURVE('',#6266,#6230,#6268,.T.);+#6266 = VERTEX_POINT('',#6267);+#6267 = CARTESIAN_POINT('',(-0.325928838821,7.050199962798E-02,1.02));+#6268 = SURFACE_CURVE('',#6269,(#6275,#6284),.PCURVE_S1.);+#6269 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6270,#6271,#6272,#6273,#6274),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6270 = CARTESIAN_POINT('',(-0.325928838821,7.050199962798E-02,1.02));+#6271 = CARTESIAN_POINT('',(-0.325928838821,5.526499428582E-02,1.02));+#6272 = CARTESIAN_POINT('',(-0.322946233,4.208278659888E-02,1.02));+#6273 = CARTESIAN_POINT('',(-0.316974276842,3.096482516132E-02,1.02));+#6274 = CARTESIAN_POINT('',(-0.308017519996,2.191278366815E-02,1.02));+#6275 = PCURVE('',#1723,#6276);+#6276 = DEFINITIONAL_REPRESENTATION('',(#6277),#6283);+#6277 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6278,#6279,#6280,#6281,#6282),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6278 = CARTESIAN_POINT('',(1.419498000372,1.164071161179));+#6279 = CARTESIAN_POINT('',(1.434735005714,1.164071161179));+#6280 = CARTESIAN_POINT('',(1.447917213401,1.167053767));+#6281 = CARTESIAN_POINT('',(1.459035174839,1.173025723158));+#6282 = CARTESIAN_POINT('',(1.468087216332,1.181982480004));+#6283 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6284 = PCURVE('',#6285,#6292);+#6285 = SURFACE_OF_LINEAR_EXTRUSION('',#6286,#6290);+#6286 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6287,#6288,#6289),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6287 = CARTESIAN_POINT('',(-0.308017519996,2.191278366815E-02,1.07));+#6288 = CARTESIAN_POINT('',(-0.325928838821,4.00146484375E-02,1.07));+#6289 = CARTESIAN_POINT('',(-0.325928838821,7.050199962798E-02,1.07));+#6290 = VECTOR('',#6291,1.);+#6291 = DIRECTION('',(0.,0.,1.));+#6292 = DEFINITIONAL_REPRESENTATION('',(#6293),#6299);+#6293 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6294,#6295,#6296,#6297,#6298),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6294 = CARTESIAN_POINT('',(1.,-5.E-02));+#6295 = CARTESIAN_POINT('',(0.750109393779,-5.E-02));+#6296 = CARTESIAN_POINT('',(0.500093448035,-5.E-02));+#6297 = CARTESIAN_POINT('',(0.2500306352,-5.E-02));+#6298 = CARTESIAN_POINT('',(0.,-5.E-02));+#6299 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6300 = ORIENTED_EDGE('',*,*,#6301,.F.);+#6301 = EDGE_CURVE('',#6302,#6266,#6304,.T.);+#6302 = VERTEX_POINT('',#6303);+#6303 = CARTESIAN_POINT('',(-0.300300409226,0.131571974981,1.02));+#6304 = SURFACE_CURVE('',#6305,(#6314,#6326),.PCURVE_S1.);+#6305 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6306,#6307,#6308,#6309,#6310,+ #6311,#6312,#6313),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.34795969933,+ 1.),.UNSPECIFIED.);+#6306 = CARTESIAN_POINT('',(-0.300300409226,0.131571974981,1.02));+#6307 = CARTESIAN_POINT('',(-0.304759118985,0.127577368841,1.02));+#6308 = CARTESIAN_POINT('',(-0.308701328528,0.12327652472,1.02));+#6309 = CARTESIAN_POINT('',(-0.312126388524,0.118669530332,1.02));+#6310 = CARTESIAN_POINT('',(-0.320482822813,0.104550668804,1.02));+#6311 = CARTESIAN_POINT('',(-0.324114860088,9.427078612134E-02,1.02));+#6312 = CARTESIAN_POINT('',(-0.325928838821,8.291939727661E-02,1.02));+#6313 = CARTESIAN_POINT('',(-0.325928838821,7.050199962798E-02,1.02));+#6314 = PCURVE('',#1723,#6315);+#6315 = DEFINITIONAL_REPRESENTATION('',(#6316),#6325);+#6316 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6317,#6318,#6319,#6320,#6321,+ #6322,#6323,#6324),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.34795969933,+ 1.),.UNSPECIFIED.);+#6317 = CARTESIAN_POINT('',(1.358428025019,1.189699590774));+#6318 = CARTESIAN_POINT('',(1.362422631159,1.185240881015));+#6319 = CARTESIAN_POINT('',(1.36672347528,1.181298671472));+#6320 = CARTESIAN_POINT('',(1.371330469668,1.177873611476));+#6321 = CARTESIAN_POINT('',(1.385449331196,1.169517177187));+#6322 = CARTESIAN_POINT('',(1.395729213879,1.165885139912));+#6323 = CARTESIAN_POINT('',(1.407080602723,1.164071161179));+#6324 = CARTESIAN_POINT('',(1.419498000372,1.164071161179));+#6325 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6326 = PCURVE('',#6327,#6334);+#6327 = SURFACE_OF_LINEAR_EXTRUSION('',#6328,#6332);+#6328 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6329,#6330,#6331),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6329 = CARTESIAN_POINT('',(-0.325928838821,7.050199962798E-02,1.07));+#6330 = CARTESIAN_POINT('',(-0.325928838821,0.108611188616,1.07));+#6331 = CARTESIAN_POINT('',(-0.300300409226,0.131571974981,1.07));+#6332 = VECTOR('',#6333,1.);+#6333 = DIRECTION('',(0.,0.,1.));+#6334 = DEFINITIONAL_REPRESENTATION('',(#6335),#6344);+#6335 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6336,#6337,#6338,#6339,#6340,+ #6341,#6342,#6343),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.34795969933,+ 1.),.UNSPECIFIED.);+#6336 = CARTESIAN_POINT('',(1.,-5.E-02));+#6337 = CARTESIAN_POINT('',(0.913012427422,-5.E-02));+#6338 = CARTESIAN_POINT('',(0.826012442728,-5.E-02));+#6339 = CARTESIAN_POINT('',(0.739006232353,-5.E-02));+#6340 = CARTESIAN_POINT('',(0.488959366234,-5.E-02));+#6341 = CARTESIAN_POINT('',(0.325918632692,-5.E-02));+#6342 = CARTESIAN_POINT('',(0.162918681535,-5.E-02));+#6343 = CARTESIAN_POINT('',(0.,-5.E-02));+#6344 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6345 = ORIENTED_EDGE('',*,*,#6346,.F.);+#6346 = EDGE_CURVE('',#6347,#6302,#6349,.T.);+#6347 = VERTEX_POINT('',#6348);+#6348 = CARTESIAN_POINT('',(-0.23218023391,0.154532761347,1.02));+#6349 = SURFACE_CURVE('',#6350,(#6356,#6365),.PCURVE_S1.);+#6350 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6351,#6352,#6353,#6354,#6355),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6351 = CARTESIAN_POINT('',(-0.23218023391,0.154532761347,1.02));+#6352 = CARTESIAN_POINT('',(-0.25340727825,0.154532761347,1.02));+#6353 = CARTESIAN_POINT('',(-0.271848885575,0.150712753118,1.02));+#6354 = CARTESIAN_POINT('',(-0.287481720557,0.143056376354,1.02));+#6355 = CARTESIAN_POINT('',(-0.300300409226,0.131571974981,1.02));+#6356 = PCURVE('',#1723,#6357);+#6357 = DEFINITIONAL_REPRESENTATION('',(#6358),#6364);+#6358 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6359,#6360,#6361,#6362,#6363),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6359 = CARTESIAN_POINT('',(1.335467238653,1.25781976609));+#6360 = CARTESIAN_POINT('',(1.335467238653,1.23659272175));+#6361 = CARTESIAN_POINT('',(1.339287246882,1.218151114425));+#6362 = CARTESIAN_POINT('',(1.346943623646,1.202518279443));+#6363 = CARTESIAN_POINT('',(1.358428025019,1.189699590774));+#6364 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6365 = PCURVE('',#6366,#6373);+#6366 = SURFACE_OF_LINEAR_EXTRUSION('',#6367,#6371);+#6367 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6368,#6369,#6370),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6368 = CARTESIAN_POINT('',(-0.300300409226,0.131571974981,1.07));+#6369 = CARTESIAN_POINT('',(-0.274671979632,0.154532761347,1.07));+#6370 = CARTESIAN_POINT('',(-0.23218023391,0.154532761347,1.07));+#6371 = VECTOR('',#6372,1.);+#6372 = DIRECTION('',(0.,0.,1.));+#6373 = DEFINITIONAL_REPRESENTATION('',(#6374),#6380);+#6374 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6375,#6376,#6377,#6378,#6379),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6375 = CARTESIAN_POINT('',(1.,-5.E-02));+#6376 = CARTESIAN_POINT('',(0.750221555041,-5.E-02));+#6377 = CARTESIAN_POINT('',(0.500206250025,-5.E-02));+#6378 = CARTESIAN_POINT('',(0.250087283384,-5.E-02));+#6379 = CARTESIAN_POINT('',(0.,-5.E-02));+#6380 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6381 = ORIENTED_EDGE('',*,*,#6382,.F.);+#6382 = EDGE_CURVE('',#5424,#6347,#6383,.T.);+#6383 = SURFACE_CURVE('',#6384,(#6390,#6399),.PCURVE_S1.);+#6384 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6385,#6386,#6387,#6388,#6389),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6385 = CARTESIAN_POINT('',(-0.197691417876,0.15081711542,1.02));+#6386 = CARTESIAN_POINT('',(-0.206741640391,0.152674792673,1.02));+#6387 = CARTESIAN_POINT('',(-0.215506629237,0.153913403673,1.02));+#6388 = CARTESIAN_POINT('',(-0.22398620691,0.154532761347,1.02));+#6389 = CARTESIAN_POINT('',(-0.23218023391,0.154532761347,1.02));+#6390 = PCURVE('',#1723,#6391);+#6391 = DEFINITIONAL_REPRESENTATION('',(#6392),#6398);+#6392 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6393,#6394,#6395,#6396,#6397),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6393 = CARTESIAN_POINT('',(1.33918288458,1.292308582124));+#6394 = CARTESIAN_POINT('',(1.337325207327,1.283258359609));+#6395 = CARTESIAN_POINT('',(1.336086596327,1.274493370763));+#6396 = CARTESIAN_POINT('',(1.335467238653,1.26601379309));+#6397 = CARTESIAN_POINT('',(1.335467238653,1.25781976609));+#6398 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6399 = PCURVE('',#6400,#6407);+#6400 = SURFACE_OF_LINEAR_EXTRUSION('',#6401,#6405);+#6401 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6402,#6403,#6404),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6402 = CARTESIAN_POINT('',(-0.23218023391,0.154532761347,1.07));+#6403 = CARTESIAN_POINT('',(-0.215793282645,0.154532761347,1.07));+#6404 = CARTESIAN_POINT('',(-0.197691417876,0.15081711542,1.07));+#6405 = VECTOR('',#6406,1.);+#6406 = DIRECTION('',(0.,0.,1.));+#6407 = DEFINITIONAL_REPRESENTATION('',(#6408),#6414);+#6408 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6409,#6410,#6411,#6412,#6413),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6409 = CARTESIAN_POINT('',(1.,-5.E-02));+#6410 = CARTESIAN_POINT('',(0.750019607636,-5.E-02));+#6411 = CARTESIAN_POINT('',(0.500024288237,-5.E-02));+#6412 = CARTESIAN_POINT('',(0.250016823382,-5.E-02));+#6413 = CARTESIAN_POINT('',(0.,-5.E-02));+#6414 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6415 = FACE_BOUND('',#6416,.T.);+#6416 = EDGE_LOOP('',(#6417,#6445,#6471,#6497,#6523,#6549,#6575));+#6417 = ORIENTED_EDGE('',*,*,#6418,.T.);+#6418 = EDGE_CURVE('',#6419,#6421,#6423,.T.);+#6419 = VERTEX_POINT('',#6420);+#6420 = CARTESIAN_POINT('',(4.525466192336E-02,0.116995210193,1.02));+#6421 = VERTEX_POINT('',#6422);+#6422 = CARTESIAN_POINT('',(-9.098568870908E-02,0.116995210193,1.02));+#6423 = SURFACE_CURVE('',#6424,(#6428,#6434),.PCURVE_S1.);+#6424 = LINE('',#6425,#6426);+#6425 = CARTESIAN_POINT('',(-0.722372669038,0.116995210193,1.02));+#6426 = VECTOR('',#6427,1.);+#6427 = DIRECTION('',(-1.,0.,0.));+#6428 = PCURVE('',#1723,#6429);+#6429 = DEFINITIONAL_REPRESENTATION('',(#6430),#6433);+#6430 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6431,#6432),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.767627330962,-0.631386980329),.PIECEWISE_BEZIER_KNOTS.);+#6431 = CARTESIAN_POINT('',(1.373004789807,1.535254661923));+#6432 = CARTESIAN_POINT('',(1.373004789807,1.399014311291));+#6433 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6434 = PCURVE('',#6435,#6440);+#6435 = PLANE('',#6436);+#6436 = AXIS2_PLACEMENT_3D('',#6437,#6438,#6439);+#6437 = CARTESIAN_POINT('',(4.525466192336E-02,0.116995210193,1.07));+#6438 = DIRECTION('',(0.,1.,0.));+#6439 = DIRECTION('',(-1.,0.,0.));+#6440 = DEFINITIONAL_REPRESENTATION('',(#6441),#6444);+#6441 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6442,#6443),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.767627330962,-0.631386980329),.PIECEWISE_BEZIER_KNOTS.);+#6442 = CARTESIAN_POINT('',(0.,-5.E-02));+#6443 = CARTESIAN_POINT('',(0.136240350632,-5.E-02));+#6444 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6445 = ORIENTED_EDGE('',*,*,#6446,.T.);+#6446 = EDGE_CURVE('',#6421,#6447,#6449,.T.);+#6447 = VERTEX_POINT('',#6448);+#6448 = CARTESIAN_POINT('',(-9.098568870908E-02,0.149388020833,1.02));+#6449 = SURFACE_CURVE('',#6450,(#6454,#6460),.PCURVE_S1.);+#6450 = LINE('',#6451,#6452);+#6451 = CARTESIAN_POINT('',(-9.098568870908E-02,0.803497605097,1.02));+#6452 = VECTOR('',#6453,1.);+#6453 = DIRECTION('',(0.,1.,0.));+#6454 = PCURVE('',#1723,#6455);+#6455 = DEFINITIONAL_REPRESENTATION('',(#6456),#6459);+#6456 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6457,#6458),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.686502394903,-0.654109584263),.PIECEWISE_BEZIER_KNOTS.);+#6457 = CARTESIAN_POINT('',(1.373004789807,1.399014311291));+#6458 = CARTESIAN_POINT('',(1.340611979167,1.399014311291));+#6459 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6460 = PCURVE('',#6461,#6466);+#6461 = PLANE('',#6462);+#6462 = AXIS2_PLACEMENT_3D('',#6463,#6464,#6465);+#6463 = CARTESIAN_POINT('',(-9.098568870908E-02,0.116995210193,1.07));+#6464 = DIRECTION('',(1.,0.,0.));+#6465 = DIRECTION('',(0.,1.,0.));+#6466 = DEFINITIONAL_REPRESENTATION('',(#6467),#6470);+#6467 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6468,#6469),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.686502394903,-0.654109584263),.PIECEWISE_BEZIER_KNOTS.);+#6468 = CARTESIAN_POINT('',(0.,-5.E-02));+#6469 = CARTESIAN_POINT('',(3.239281063988E-02,-5.E-02));+#6470 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6471 = ORIENTED_EDGE('',*,*,#6472,.T.);+#6472 = EDGE_CURVE('',#6447,#6473,#6475,.T.);+#6473 = VERTEX_POINT('',#6474);+#6474 = CARTESIAN_POINT('',(8.812749953497E-02,0.149388020833,1.02));+#6475 = SURFACE_CURVE('',#6476,(#6480,#6486),.PCURVE_S1.);+#6476 = LINE('',#6477,#6478);+#6477 = CARTESIAN_POINT('',(-0.790492844355,0.149388020833,1.02));+#6478 = VECTOR('',#6479,1.);+#6479 = DIRECTION('',(1.,0.,-0.));+#6480 = PCURVE('',#1723,#6481);+#6481 = DEFINITIONAL_REPRESENTATION('',(#6482),#6485);+#6482 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6483,#6484),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.699507155645,0.87862034389),.PIECEWISE_BEZIER_KNOTS.);+#6483 = CARTESIAN_POINT('',(1.340611979167,1.399014311291));+#6484 = CARTESIAN_POINT('',(1.340611979167,1.578127499535));+#6485 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6486 = PCURVE('',#6487,#6492);+#6487 = PLANE('',#6488);+#6488 = AXIS2_PLACEMENT_3D('',#6489,#6490,#6491);+#6489 = CARTESIAN_POINT('',(-9.098568870908E-02,0.149388020833,1.07));+#6490 = DIRECTION('',(0.,-1.,0.));+#6491 = DIRECTION('',(1.,0.,0.));+#6492 = DEFINITIONAL_REPRESENTATION('',(#6493),#6496);+#6493 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6494,#6495),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.699507155645,0.87862034389),.PIECEWISE_BEZIER_KNOTS.);+#6494 = CARTESIAN_POINT('',(0.,-5.E-02));+#6495 = CARTESIAN_POINT('',(0.179113188244,-5.E-02));+#6496 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6497 = ORIENTED_EDGE('',*,*,#6498,.T.);+#6498 = EDGE_CURVE('',#6473,#6499,#6501,.T.);+#6499 = VERTEX_POINT('',#6500);+#6500 = CARTESIAN_POINT('',(8.812749953497E-02,0.133001069568,1.02));+#6501 = SURFACE_CURVE('',#6502,(#6506,#6512),.PCURVE_S1.);+#6502 = LINE('',#6503,#6504);+#6503 = CARTESIAN_POINT('',(8.812749953497E-02,0.819694010417,1.02));+#6504 = VECTOR('',#6505,1.);+#6505 = DIRECTION('',(0.,-1.,0.));+#6506 = PCURVE('',#1723,#6507);+#6507 = DEFINITIONAL_REPRESENTATION('',(#6508),#6511);+#6508 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6509,#6510),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.670305989583,0.686692940848),.PIECEWISE_BEZIER_KNOTS.);+#6509 = CARTESIAN_POINT('',(1.340611979167,1.578127499535));+#6510 = CARTESIAN_POINT('',(1.356998930432,1.578127499535));+#6511 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6512 = PCURVE('',#6513,#6518);+#6513 = PLANE('',#6514);+#6514 = AXIS2_PLACEMENT_3D('',#6515,#6516,#6517);+#6515 = CARTESIAN_POINT('',(8.812749953497E-02,0.149388020833,1.07));+#6516 = DIRECTION('',(-1.,0.,0.));+#6517 = DIRECTION('',(0.,-1.,0.));+#6518 = DEFINITIONAL_REPRESENTATION('',(#6519),#6522);+#6519 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6520,#6521),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.670305989583,0.686692940848),.PIECEWISE_BEZIER_KNOTS.);+#6520 = CARTESIAN_POINT('',(0.,-5.E-02));+#6521 = CARTESIAN_POINT('',(1.638695126488E-02,-5.E-02));+#6522 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6523 = ORIENTED_EDGE('',*,*,#6524,.T.);+#6524 = EDGE_CURVE('',#6499,#6525,#6527,.T.);+#6525 = VERTEX_POINT('',#6526);+#6526 = CARTESIAN_POINT('',(-1.362403506324E-02,-0.135097074963,1.02));+#6527 = SURFACE_CURVE('',#6528,(#6532,#6538),.PCURVE_S1.);+#6528 = LINE('',#6529,#6530);+#6529 = CARTESIAN_POINT('',(0.213867317562,0.464304297967,1.02));+#6530 = VECTOR('',#6531,1.);+#6531 = DIRECTION('',(-0.354834508557,-0.934929126478,0.));+#6532 = PCURVE('',#1723,#6533);+#6533 = DEFINITIONAL_REPRESENTATION('',(#6534),#6537);+#6534 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6535,#6536),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.354361864461,0.641119584312),.PIECEWISE_BEZIER_KNOTS.);+#6535 = CARTESIAN_POINT('',(1.356998930432,1.578127499535));+#6536 = CARTESIAN_POINT('',(1.625097074963,1.476375964937));+#6537 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6538 = PCURVE('',#6539,#6544);+#6539 = PLANE('',#6540);+#6540 = AXIS2_PLACEMENT_3D('',#6541,#6542,#6543);+#6541 = CARTESIAN_POINT('',(8.812749953497E-02,0.133001069568,1.07));+#6542 = DIRECTION('',(-0.934929126478,0.354834508557,0.));+#6543 = DIRECTION('',(-0.354834508557,-0.934929126478,0.));+#6544 = DEFINITIONAL_REPRESENTATION('',(#6545),#6548);+#6545 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6546,#6547),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.354361864461,0.641119584312),.PIECEWISE_BEZIER_KNOTS.);+#6546 = CARTESIAN_POINT('',(0.,-5.E-02));+#6547 = CARTESIAN_POINT('',(0.286757719851,-5.E-02));+#6548 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6549 = ORIENTED_EDGE('',*,*,#6550,.T.);+#6550 = EDGE_CURVE('',#6525,#6551,#6553,.T.);+#6551 = VERTEX_POINT('',#6552);+#6552 = CARTESIAN_POINT('',(-5.382922944568E-02,-0.135097074963,1.02));+#6553 = SURFACE_CURVE('',#6554,(#6558,#6564),.PCURVE_S1.);+#6554 = LINE('',#6555,#6556);+#6555 = CARTESIAN_POINT('',(-0.751812017532,-0.135097074963,1.02));+#6556 = VECTOR('',#6557,1.);+#6557 = DIRECTION('',(-1.,0.,0.));+#6558 = PCURVE('',#1723,#6559);+#6559 = DEFINITIONAL_REPRESENTATION('',(#6560),#6563);+#6560 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6561,#6562),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.738187982468,-0.697982788086),.PIECEWISE_BEZIER_KNOTS.);+#6561 = CARTESIAN_POINT('',(1.625097074963,1.476375964937));+#6562 = CARTESIAN_POINT('',(1.625097074963,1.436170770554));+#6563 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6564 = PCURVE('',#6565,#6570);+#6565 = PLANE('',#6566);+#6566 = AXIS2_PLACEMENT_3D('',#6567,#6568,#6569);+#6567 = CARTESIAN_POINT('',(-1.362403506324E-02,-0.135097074963,1.07));+#6568 = DIRECTION('',(0.,1.,0.));+#6569 = DIRECTION('',(-1.,0.,0.));+#6570 = DEFINITIONAL_REPRESENTATION('',(#6571),#6574);+#6571 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6572,#6573),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.738187982468,-0.697982788086),.PIECEWISE_BEZIER_KNOTS.);+#6572 = CARTESIAN_POINT('',(0.,-5.E-02));+#6573 = CARTESIAN_POINT('',(4.020519438244E-02,-5.E-02));+#6574 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6575 = ORIENTED_EDGE('',*,*,#6576,.T.);+#6576 = EDGE_CURVE('',#6551,#6419,#6577,.T.);+#6577 = SURFACE_CURVE('',#6578,(#6582,#6588),.PCURVE_S1.);+#6578 = LINE('',#6579,#6580);+#6579 = CARTESIAN_POINT('',(0.12671482355,0.324248659872,1.02));+#6580 = VECTOR('',#6581,1.);+#6581 = DIRECTION('',(0.365804721382,0.93069162767,-0.));+#6582 = PCURVE('',#1723,#6583);+#6583 = DEFINITIONAL_REPRESENTATION('',(#6584),#6587);+#6584 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6585,#6586),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.49355309662,-0.222687562149),.PIECEWISE_BEZIER_KNOTS.);+#6585 = CARTESIAN_POINT('',(1.625097074963,1.436170770554));+#6586 = CARTESIAN_POINT('',(1.373004789807,1.535254661923));+#6587 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6588 = PCURVE('',#6589,#6594);+#6589 = PLANE('',#6590);+#6590 = AXIS2_PLACEMENT_3D('',#6591,#6592,#6593);+#6591 = CARTESIAN_POINT('',(-5.382922944568E-02,-0.135097074963,1.07));+#6592 = DIRECTION('',(0.93069162767,-0.365804721382,0.));+#6593 = DIRECTION('',(0.365804721382,0.93069162767,0.));+#6594 = DEFINITIONAL_REPRESENTATION('',(#6595),#6598);+#6595 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6596,#6597),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.49355309662,-0.222687562149),.PIECEWISE_BEZIER_KNOTS.);+#6596 = CARTESIAN_POINT('',(0.,-5.E-02));+#6597 = CARTESIAN_POINT('',(0.270865534471,-5.E-02));+#6598 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6599 = FACE_BOUND('',#6600,.T.);+#6600 = EDGE_LOOP('',(#6601,#6629,#6655,#6681,#6707,#6733,#6759,#6785));+#6601 = ORIENTED_EDGE('',*,*,#6602,.T.);+#6602 = EDGE_CURVE('',#6603,#6605,#6607,.T.);+#6603 = VERTEX_POINT('',#6604);+#6604 = CARTESIAN_POINT('',(0.164345877511,-0.135097074963,1.02));+#6605 = VERTEX_POINT('',#6606);+#6606 = CARTESIAN_POINT('',(0.124521775019,-0.135097074963,1.02));+#6607 = SURFACE_CURVE('',#6608,(#6612,#6618),.PCURVE_S1.);+#6608 = LINE('',#6609,#6610);+#6609 = CARTESIAN_POINT('',(-0.662827061244,-0.135097074963,1.02));+#6610 = VECTOR('',#6611,1.);+#6611 = DIRECTION('',(-1.,0.,0.));+#6612 = PCURVE('',#1723,#6613);+#6613 = DEFINITIONAL_REPRESENTATION('',(#6614),#6617);+#6614 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6615,#6616),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.827172938756,-0.787348836263),.PIECEWISE_BEZIER_KNOTS.);+#6615 = CARTESIAN_POINT('',(1.625097074963,1.654345877511));+#6616 = CARTESIAN_POINT('',(1.625097074963,1.614521775019));+#6617 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6618 = PCURVE('',#6619,#6624);+#6619 = PLANE('',#6620);+#6620 = AXIS2_PLACEMENT_3D('',#6621,#6622,#6623);+#6621 = CARTESIAN_POINT('',(0.164345877511,-0.135097074963,1.07));+#6622 = DIRECTION('',(0.,1.,0.));+#6623 = DIRECTION('',(-1.,0.,0.));+#6624 = DEFINITIONAL_REPRESENTATION('',(#6625),#6628);+#6625 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6626,#6627),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.827172938756,-0.787348836263),.PIECEWISE_BEZIER_KNOTS.);+#6626 = CARTESIAN_POINT('',(0.,-5.E-02));+#6627 = CARTESIAN_POINT('',(3.982410249256E-02,-5.E-02));+#6628 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6629 = ORIENTED_EDGE('',*,*,#6630,.T.);+#6630 = EDGE_CURVE('',#6605,#6631,#6633,.T.);+#6631 = VERTEX_POINT('',#6632);+#6632 = CARTESIAN_POINT('',(0.211601271856,0.149388020833,1.02));+#6633 = SURFACE_CURVE('',#6634,(#6638,#6644),.PCURVE_S1.);+#6634 = LINE('',#6635,#6636);+#6635 = CARTESIAN_POINT('',(0.282775750606,0.381912083794,1.02));+#6636 = VECTOR('',#6637,1.);+#6637 = DIRECTION('',(0.292690370589,0.956207271968,-0.));+#6638 = PCURVE('',#1723,#6639);+#6639 = DEFINITIONAL_REPRESENTATION('',(#6640),#6643);+#6640 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6641,#6642),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.54068733204,-0.243173284473),.PIECEWISE_BEZIER_KNOTS.);+#6641 = CARTESIAN_POINT('',(1.625097074963,1.614521775019));+#6642 = CARTESIAN_POINT('',(1.340611979167,1.701601271856));+#6643 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6644 = PCURVE('',#6645,#6650);+#6645 = PLANE('',#6646);+#6646 = AXIS2_PLACEMENT_3D('',#6647,#6648,#6649);+#6647 = CARTESIAN_POINT('',(0.124521775019,-0.135097074963,1.07));+#6648 = DIRECTION('',(0.956207271968,-0.292690370589,0.));+#6649 = DIRECTION('',(0.292690370589,0.956207271968,0.));+#6650 = DEFINITIONAL_REPRESENTATION('',(#6651),#6654);+#6651 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6652,#6653),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.54068733204,-0.243173284473),.PIECEWISE_BEZIER_KNOTS.);+#6652 = CARTESIAN_POINT('',(0.,-5.E-02));+#6653 = CARTESIAN_POINT('',(0.297514047567,-5.E-02));+#6654 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6655 = ORIENTED_EDGE('',*,*,#6656,.T.);+#6656 = EDGE_CURVE('',#6631,#6657,#6659,.T.);+#6657 = VERTEX_POINT('',#6658);+#6658 = CARTESIAN_POINT('',(0.258285028367,0.149388020833,1.02));+#6659 = SURFACE_CURVE('',#6660,(#6664,#6670),.PCURVE_S1.);+#6660 = LINE('',#6661,#6662);+#6661 = CARTESIAN_POINT('',(-0.639199364072,0.149388020833,1.02));+#6662 = VECTOR('',#6663,1.);+#6663 = DIRECTION('',(1.,0.,-0.));+#6664 = PCURVE('',#1723,#6665);+#6665 = DEFINITIONAL_REPRESENTATION('',(#6666),#6669);+#6666 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6667,#6668),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.850800635928,0.897484392439),.PIECEWISE_BEZIER_KNOTS.);+#6667 = CARTESIAN_POINT('',(1.340611979167,1.701601271856));+#6668 = CARTESIAN_POINT('',(1.340611979167,1.748285028367));+#6669 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6670 = PCURVE('',#6671,#6676);+#6671 = PLANE('',#6672);+#6672 = AXIS2_PLACEMENT_3D('',#6673,#6674,#6675);+#6673 = CARTESIAN_POINT('',(0.211601271856,0.149388020833,1.07));+#6674 = DIRECTION('',(0.,-1.,0.));+#6675 = DIRECTION('',(1.,0.,0.));+#6676 = DEFINITIONAL_REPRESENTATION('',(#6677),#6680);+#6677 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6678,#6679),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.850800635928,0.897484392439),.PIECEWISE_BEZIER_KNOTS.);+#6678 = CARTESIAN_POINT('',(0.,-5.E-02));+#6679 = CARTESIAN_POINT('',(4.668375651042E-02,-5.E-02));+#6680 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6681 = ORIENTED_EDGE('',*,*,#6682,.T.);+#6682 = EDGE_CURVE('',#6657,#6683,#6685,.T.);+#6683 = VERTEX_POINT('',#6684);+#6684 = CARTESIAN_POINT('',(0.345364525205,-0.135097074963,1.02));+#6685 = SURFACE_CURVE('',#6686,(#6690,#6696),.PCURVE_S1.);+#6686 = LINE('',#6687,#6688);+#6687 = CARTESIAN_POINT('',(-4.201030091491E-03,1.00691906083,1.02));+#6688 = VECTOR('',#6689,1.);+#6689 = DIRECTION('',(0.292690370589,-0.956207271968,0.));+#6690 = PCURVE('',#1723,#6691);+#6691 = DEFINITIONAL_REPRESENTATION('',(#6692),#6695);+#6692 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6693,#6694),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.896804558107,1.194318605674),.PIECEWISE_BEZIER_KNOTS.);+#6693 = CARTESIAN_POINT('',(1.340611979167,1.748285028367));+#6694 = CARTESIAN_POINT('',(1.625097074963,1.835364525205));+#6695 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6696 = PCURVE('',#6697,#6702);+#6697 = PLANE('',#6698);+#6698 = AXIS2_PLACEMENT_3D('',#6699,#6700,#6701);+#6699 = CARTESIAN_POINT('',(0.258285028367,0.149388020833,1.07));+#6700 = DIRECTION('',(-0.956207271968,-0.292690370589,0.));+#6701 = DIRECTION('',(0.292690370589,-0.956207271968,0.));+#6702 = DEFINITIONAL_REPRESENTATION('',(#6703),#6706);+#6703 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6704,#6705),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.896804558107,1.194318605674),.PIECEWISE_BEZIER_KNOTS.);+#6704 = CARTESIAN_POINT('',(0.,-5.E-02));+#6705 = CARTESIAN_POINT('',(0.297514047567,-5.E-02));+#6706 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6707 = ORIENTED_EDGE('',*,*,#6708,.T.);+#6708 = EDGE_CURVE('',#6683,#6709,#6711,.T.);+#6709 = VERTEX_POINT('',#6710);+#6710 = CARTESIAN_POINT('',(0.305540422712,-0.135097074963,1.02));+#6711 = SURFACE_CURVE('',#6712,(#6716,#6722),.PCURVE_S1.);+#6712 = LINE('',#6713,#6714);+#6713 = CARTESIAN_POINT('',(-0.572317737398,-0.135097074963,1.02));+#6714 = VECTOR('',#6715,1.);+#6715 = DIRECTION('',(-1.,0.,0.));+#6716 = PCURVE('',#1723,#6717);+#6717 = DEFINITIONAL_REPRESENTATION('',(#6718),#6721);+#6718 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6719,#6720),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.917682262602,-0.87785816011),.PIECEWISE_BEZIER_KNOTS.);+#6719 = CARTESIAN_POINT('',(1.625097074963,1.835364525205));+#6720 = CARTESIAN_POINT('',(1.625097074963,1.795540422712));+#6721 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6722 = PCURVE('',#6723,#6728);+#6723 = PLANE('',#6724);+#6724 = AXIS2_PLACEMENT_3D('',#6725,#6726,#6727);+#6725 = CARTESIAN_POINT('',(0.345364525205,-0.135097074963,1.07));+#6726 = DIRECTION('',(0.,1.,0.));+#6727 = DIRECTION('',(-1.,0.,0.));+#6728 = DEFINITIONAL_REPRESENTATION('',(#6729),#6732);+#6729 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6730,#6731),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.917682262602,-0.87785816011),.PIECEWISE_BEZIER_KNOTS.);+#6730 = CARTESIAN_POINT('',(0.,-5.E-02));+#6731 = CARTESIAN_POINT('',(3.982410249256E-02,-5.E-02));+#6732 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6733 = ORIENTED_EDGE('',*,*,#6734,.T.);+#6734 = EDGE_CURVE('',#6709,#6735,#6737,.T.);+#6735 = VERTEX_POINT('',#6736);+#6736 = CARTESIAN_POINT('',(0.284580368769,-6.097470238095E-02,1.02));+#6737 = SURFACE_CURVE('',#6738,(#6742,#6748),.PCURVE_S1.);+#6738 = LINE('',#6739,#6740);+#6739 = CARTESIAN_POINT('',(2.631087769497E-02,0.852360134234,1.02));+#6740 = VECTOR('',#6741,1.);+#6741 = DIRECTION('',(-0.272106397942,0.962267170904,0.));+#6742 = PCURVE('',#1723,#6743);+#6743 = DEFINITIONAL_REPRESENTATION('',(#6744),#6747);+#6744 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6745,#6746),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.026177800776,-0.949148910232),.PIECEWISE_BEZIER_KNOTS.);+#6745 = CARTESIAN_POINT('',(1.625097074963,1.795540422712));+#6746 = CARTESIAN_POINT('',(1.550974702381,1.774580368769));+#6747 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6748 = PCURVE('',#6749,#6754);+#6749 = PLANE('',#6750);+#6750 = AXIS2_PLACEMENT_3D('',#6751,#6752,#6753);+#6751 = CARTESIAN_POINT('',(0.305540422712,-0.135097074963,1.07));+#6752 = DIRECTION('',(0.962267170904,0.272106397942,0.));+#6753 = DIRECTION('',(-0.272106397942,0.962267170904,0.));+#6754 = DEFINITIONAL_REPRESENTATION('',(#6755),#6758);+#6755 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6756,#6757),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.026177800776,-0.949148910232),.PIECEWISE_BEZIER_KNOTS.);+#6756 = CARTESIAN_POINT('',(0.,-5.E-02));+#6757 = CARTESIAN_POINT('',(7.702889054423E-02,-5.E-02));+#6758 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6759 = ORIENTED_EDGE('',*,*,#6760,.T.);+#6760 = EDGE_CURVE('',#6735,#6761,#6763,.T.);+#6761 = VERTEX_POINT('',#6762);+#6762 = CARTESIAN_POINT('',(0.184924839565,-6.097470238095E-02,1.02));+#6763 = SURFACE_CURVE('',#6764,(#6768,#6774),.PCURVE_S1.);+#6764 = LINE('',#6765,#6766);+#6765 = CARTESIAN_POINT('',(-0.602709815616,-6.097470238095E-02,1.02));+#6766 = VECTOR('',#6767,1.);+#6767 = DIRECTION('',(-1.,0.,0.));+#6768 = PCURVE('',#1723,#6769);+#6769 = DEFINITIONAL_REPRESENTATION('',(#6770),#6773);+#6770 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6771,#6772),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.887290184384,-0.78763465518),.PIECEWISE_BEZIER_KNOTS.);+#6771 = CARTESIAN_POINT('',(1.550974702381,1.774580368769));+#6772 = CARTESIAN_POINT('',(1.550974702381,1.674924839565));+#6773 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6774 = PCURVE('',#6775,#6780);+#6775 = PLANE('',#6776);+#6776 = AXIS2_PLACEMENT_3D('',#6777,#6778,#6779);+#6777 = CARTESIAN_POINT('',(0.284580368769,-6.097470238095E-02,1.07));+#6778 = DIRECTION('',(0.,1.,0.));+#6779 = DIRECTION('',(-1.,0.,0.));+#6780 = DEFINITIONAL_REPRESENTATION('',(#6781),#6784);+#6781 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6782,#6783),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.887290184384,-0.78763465518),.PIECEWISE_BEZIER_KNOTS.);+#6782 = CARTESIAN_POINT('',(0.,-5.E-02));+#6783 = CARTESIAN_POINT('',(9.965552920387E-02,-5.E-02));+#6784 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6785 = ORIENTED_EDGE('',*,*,#6786,.T.);+#6786 = EDGE_CURVE('',#6761,#6603,#6787,.T.);+#6787 = SURFACE_CURVE('',#6788,(#6792,#6798),.PCURVE_S1.);+#6788 = LINE('',#6789,#6790);+#6789 = CARTESIAN_POINT('',(0.324886265057,0.443145617217,1.02));+#6790 = VECTOR('',#6791,1.);+#6791 = DIRECTION('',(-0.2675161078,-0.963553388281,0.));+#6792 = PCURVE('',#1723,#6793);+#6793 = DEFINITIONAL_REPRESENTATION('',(#6794),#6797);+#6794 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6795,#6796),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.523188777839,0.600114844919),.PIECEWISE_BEZIER_KNOTS.);+#6795 = CARTESIAN_POINT('',(1.550974702381,1.674924839565));+#6796 = CARTESIAN_POINT('',(1.625097074963,1.654345877511));+#6797 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6798 = PCURVE('',#6799,#6804);+#6799 = PLANE('',#6800);+#6800 = AXIS2_PLACEMENT_3D('',#6801,#6802,#6803);+#6801 = CARTESIAN_POINT('',(0.184924839565,-6.097470238095E-02,1.07));+#6802 = DIRECTION('',(-0.963553388281,0.2675161078,0.));+#6803 = DIRECTION('',(-0.2675161078,-0.963553388281,0.));+#6804 = DEFINITIONAL_REPRESENTATION('',(#6805),#6808);+#6805 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6806,#6807),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.523188777839,0.600114844919),.PIECEWISE_BEZIER_KNOTS.);+#6806 = CARTESIAN_POINT('',(0.,-5.E-02));+#6807 = CARTESIAN_POINT('',(7.692606707979E-02,-5.E-02));+#6808 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6809 = FACE_BOUND('',#6810,.T.);+#6810 = EDGE_LOOP('',(#6811,#6849,#6875,#6911,#6947,#6992,#7028,#7073,+ #7109,#7154,#7190,#7226,#7271,#7316,#7352,#7388,#7424));+#6811 = ORIENTED_EDGE('',*,*,#6812,.F.);+#6812 = EDGE_CURVE('',#6813,#6815,#6817,.T.);+#6813 = VERTEX_POINT('',#6814);+#6814 = CARTESIAN_POINT('',(0.397383568173,-0.12919015067,1.02));+#6815 = VERTEX_POINT('',#6816);+#6816 = CARTESIAN_POINT('',(0.4246316383,-0.137669445219,1.02));+#6817 = SURFACE_CURVE('',#6818,(#6824,#6833),.PCURVE_S1.);+#6818 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6819,#6820,#6821,#6822,#6823),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6819 = CARTESIAN_POINT('',(0.397383568173,-0.12919015067,1.02));+#6820 = CARTESIAN_POINT('',(0.403957414046,-0.131953071399,1.02));+#6821 = CARTESIAN_POINT('',(0.410690063512,-0.134287268561,1.02));+#6822 = CARTESIAN_POINT('',(0.417581485228,-0.136192723968,1.02));+#6823 = CARTESIAN_POINT('',(0.4246316383,-0.137669445219,1.02));+#6824 = PCURVE('',#1723,#6825);+#6825 = DEFINITIONAL_REPRESENTATION('',(#6826),#6832);+#6826 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6827,#6828,#6829,#6830,#6831),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6827 = CARTESIAN_POINT('',(1.61919015067,1.887383568173));+#6828 = CARTESIAN_POINT('',(1.621953071399,1.893957414046));+#6829 = CARTESIAN_POINT('',(1.624287268561,1.900690063512));+#6830 = CARTESIAN_POINT('',(1.626192723968,1.907581485228));+#6831 = CARTESIAN_POINT('',(1.627669445219,1.9146316383));+#6832 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6833 = PCURVE('',#6834,#6841);+#6834 = SURFACE_OF_LINEAR_EXTRUSION('',#6835,#6839);+#6835 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6836,#6837,#6838),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6836 = CARTESIAN_POINT('',(0.4246316383,-0.137669445219,1.07));+#6837 = CARTESIAN_POINT('',(0.410531238374,-0.134715983073,1.07));+#6838 = CARTESIAN_POINT('',(0.397383568173,-0.12919015067,1.07));+#6839 = VECTOR('',#6840,1.);+#6840 = DIRECTION('',(0.,0.,1.));+#6841 = DEFINITIONAL_REPRESENTATION('',(#6842),#6848);+#6842 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6843,#6844,#6845,#6846,#6847),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6843 = CARTESIAN_POINT('',(1.,-5.E-02));+#6844 = CARTESIAN_POINT('',(0.749999590349,-5.E-02));+#6845 = CARTESIAN_POINT('',(0.499998618395,-5.E-02));+#6846 = CARTESIAN_POINT('',(0.249998337261,-5.E-02));+#6847 = CARTESIAN_POINT('',(0.,-5.E-02));+#6848 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6849 = ORIENTED_EDGE('',*,*,#6850,.T.);+#6850 = EDGE_CURVE('',#6813,#6851,#6853,.T.);+#6851 = VERTEX_POINT('',#6852);+#6852 = CARTESIAN_POINT('',(0.397383568173,-9.374860491071E-02,1.02));+#6853 = SURFACE_CURVE('',#6854,(#6858,#6864),.PCURVE_S1.);+#6854 = LINE('',#6855,#6856);+#6855 = CARTESIAN_POINT('',(0.397383568173,0.680404924665,1.02));+#6856 = VECTOR('',#6857,1.);+#6857 = DIRECTION('',(0.,1.,0.));+#6858 = PCURVE('',#1723,#6859);+#6859 = DEFINITIONAL_REPRESENTATION('',(#6860),#6863);+#6860 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6861,#6862),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.809595075335,-0.774153529576),.PIECEWISE_BEZIER_KNOTS.);+#6861 = CARTESIAN_POINT('',(1.61919015067,1.887383568173));+#6862 = CARTESIAN_POINT('',(1.583748604911,1.887383568173));+#6863 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6864 = PCURVE('',#6865,#6870);+#6865 = PLANE('',#6866);+#6866 = AXIS2_PLACEMENT_3D('',#6867,#6868,#6869);+#6867 = CARTESIAN_POINT('',(0.397383568173,-0.12919015067,1.07));+#6868 = DIRECTION('',(1.,0.,0.));+#6869 = DIRECTION('',(0.,1.,0.));+#6870 = DEFINITIONAL_REPRESENTATION('',(#6871),#6874);+#6871 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6872,#6873),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.809595075335,-0.774153529576),.PIECEWISE_BEZIER_KNOTS.);+#6872 = CARTESIAN_POINT('',(0.,-5.E-02));+#6873 = CARTESIAN_POINT('',(3.544154575893E-02,-5.E-02));+#6874 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6875 = ORIENTED_EDGE('',*,*,#6876,.F.);+#6876 = EDGE_CURVE('',#6877,#6851,#6879,.T.);+#6877 = VERTEX_POINT('',#6878);+#6878 = CARTESIAN_POINT('',(0.422916724795,-0.1045144508,1.02));+#6879 = SURFACE_CURVE('',#6880,(#6886,#6895),.PCURVE_S1.);+#6880 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6881,#6882,#6883,#6884,#6885),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6881 = CARTESIAN_POINT('',(0.422916724795,-0.1045144508,1.02));+#6882 = CARTESIAN_POINT('',(0.416152394468,-0.102656641766,1.02));+#6883 = CARTESIAN_POINT('',(0.409642047395,-0.100243061683,1.02));+#6884 = CARTESIAN_POINT('',(0.403385756692,-9.727369975487E-02,1.02));+#6885 = CARTESIAN_POINT('',(0.397383568173,-9.374860491071E-02,1.02));+#6886 = PCURVE('',#1723,#6887);+#6887 = DEFINITIONAL_REPRESENTATION('',(#6888),#6894);+#6888 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6889,#6890,#6891,#6892,#6893),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6889 = CARTESIAN_POINT('',(1.5945144508,1.912916724795));+#6890 = CARTESIAN_POINT('',(1.592656641766,1.906152394468));+#6891 = CARTESIAN_POINT('',(1.590243061683,1.899642047395));+#6892 = CARTESIAN_POINT('',(1.587273699755,1.893385756692));+#6893 = CARTESIAN_POINT('',(1.583748604911,1.887383568173));+#6894 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6895 = PCURVE('',#6896,#6903);+#6896 = SURFACE_OF_LINEAR_EXTRUSION('',#6897,#6901);+#6897 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6898,#6899,#6900),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6898 = CARTESIAN_POINT('',(0.397383568173,-9.374860491071E-02,1.07));+#6899 = CARTESIAN_POINT('',(0.409387962705,-0.100798804874,1.07));+#6900 = CARTESIAN_POINT('',(0.422916724795,-0.1045144508,1.07));+#6901 = VECTOR('',#6902,1.);+#6902 = DIRECTION('',(0.,0.,1.));+#6903 = DEFINITIONAL_REPRESENTATION('',(#6904),#6910);+#6904 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6905,#6906,#6907,#6908,#6909),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6905 = CARTESIAN_POINT('',(1.,-5.E-02));+#6906 = CARTESIAN_POINT('',(0.750001874437,-5.E-02));+#6907 = CARTESIAN_POINT('',(0.500001006755,-5.E-02));+#6908 = CARTESIAN_POINT('',(0.249999635667,-5.E-02));+#6909 = CARTESIAN_POINT('',(0.,-5.E-02));+#6910 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6911 = ORIENTED_EDGE('',*,*,#6912,.F.);+#6912 = EDGE_CURVE('',#6913,#6877,#6915,.T.);+#6913 = VERTEX_POINT('',#6914);+#6914 = CARTESIAN_POINT('',(0.451117524647,-0.108230096726,1.02));+#6915 = SURFACE_CURVE('',#6916,(#6922,#6931),.PCURVE_S1.);+#6916 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6917,#6918,#6919,#6920,#6921),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6917 = CARTESIAN_POINT('',(0.451117524647,-0.108230096726,1.02));+#6918 = CARTESIAN_POINT('',(0.443781677819,-0.108230096726,1.02));+#6919 = CARTESIAN_POINT('',(0.436636204072,-0.107610851454,1.02));+#6920 = CARTESIAN_POINT('',(0.429681196394,-0.106372298633,1.02));+#6921 = CARTESIAN_POINT('',(0.422916724795,-0.1045144508,1.02));+#6922 = PCURVE('',#1723,#6923);+#6923 = DEFINITIONAL_REPRESENTATION('',(#6924),#6930);+#6924 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6925,#6926,#6927,#6928,#6929),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6925 = CARTESIAN_POINT('',(1.598230096726,1.941117524647));+#6926 = CARTESIAN_POINT('',(1.598230096726,1.933781677819));+#6927 = CARTESIAN_POINT('',(1.597610851454,1.926636204072));+#6928 = CARTESIAN_POINT('',(1.596372298633,1.919681196394));+#6929 = CARTESIAN_POINT('',(1.5945144508,1.912916724795));+#6930 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6931 = PCURVE('',#6932,#6939);+#6932 = SURFACE_OF_LINEAR_EXTRUSION('',#6933,#6937);+#6933 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6934,#6935,#6936),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6934 = CARTESIAN_POINT('',(0.422916724795,-0.1045144508,1.07));+#6935 = CARTESIAN_POINT('',(0.436445486886,-0.108230096726,1.07));+#6936 = CARTESIAN_POINT('',(0.451117524647,-0.108230096726,1.07));+#6937 = VECTOR('',#6938,1.);+#6938 = DIRECTION('',(0.,0.,1.));+#6939 = DEFINITIONAL_REPRESENTATION('',(#6940),#6946);+#6940 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6941,#6942,#6943,#6944,#6945),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6941 = CARTESIAN_POINT('',(1.,-5.E-02));+#6942 = CARTESIAN_POINT('',(0.750005863282,-5.E-02));+#6943 = CARTESIAN_POINT('',(0.500006140201,-5.E-02));+#6944 = CARTESIAN_POINT('',(0.250003346702,-5.E-02));+#6945 = CARTESIAN_POINT('',(0.,-5.E-02));+#6946 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6947 = ORIENTED_EDGE('',*,*,#6948,.F.);+#6948 = EDGE_CURVE('',#6949,#6913,#6951,.T.);+#6949 = VERTEX_POINT('',#6950);+#6950 = CARTESIAN_POINT('',(0.506471121652,-8.069620768229E-02,1.02));+#6951 = SURFACE_CURVE('',#6952,(#6961,#6973),.PCURVE_S1.);+#6952 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6953,#6954,#6955,#6956,#6957,+ #6958,#6959,#6960),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.395963447743,+ 1.),.UNSPECIFIED.);+#6953 = CARTESIAN_POINT('',(0.506471121652,-8.069620768229E-02,1.02));+#6954 = CARTESIAN_POINT('',(0.502755729835,-8.614670633755E-02,1.02));+#6955 = CARTESIAN_POINT('',(0.498574077345,-9.087911304637E-02,1.02));+#6956 = CARTESIAN_POINT('',(0.493926112328,-9.489209745897E-02,1.02));+#6957 = CARTESIAN_POINT('',(0.481011531428,-0.103209016661,1.02));+#6958 = CARTESIAN_POINT('',(0.472126831059,-0.106557715437,1.02));+#6959 = CARTESIAN_POINT('',(0.462160360326,-0.108230096726,1.02));+#6960 = CARTESIAN_POINT('',(0.451117524647,-0.108230096726,1.02));+#6961 = PCURVE('',#1723,#6962);+#6962 = DEFINITIONAL_REPRESENTATION('',(#6963),#6972);+#6963 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6964,#6965,#6966,#6967,#6968,+ #6969,#6970,#6971),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.395963447743,+ 1.),.UNSPECIFIED.);+#6964 = CARTESIAN_POINT('',(1.570696207682,1.996471121652));+#6965 = CARTESIAN_POINT('',(1.576146706338,1.992755729835));+#6966 = CARTESIAN_POINT('',(1.580879113046,1.988574077345));+#6967 = CARTESIAN_POINT('',(1.584892097459,1.983926112328));+#6968 = CARTESIAN_POINT('',(1.593209016661,1.971011531428));+#6969 = CARTESIAN_POINT('',(1.596557715437,1.962126831059));+#6970 = CARTESIAN_POINT('',(1.598230096726,1.952160360326));+#6971 = CARTESIAN_POINT('',(1.598230096726,1.941117524647));+#6972 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6973 = PCURVE('',#6974,#6981);+#6974 = SURFACE_OF_LINEAR_EXTRUSION('',#6975,#6979);+#6975 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6976,#6977,#6978),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6976 = CARTESIAN_POINT('',(0.451117524647,-0.108230096726,1.07));+#6977 = CARTESIAN_POINT('',(0.487702346075,-0.108230096726,1.07));+#6978 = CARTESIAN_POINT('',(0.506471121652,-8.069620768229E-02,1.07));+#6979 = VECTOR('',#6980,1.);+#6980 = DIRECTION('',(0.,0.,1.));+#6981 = DEFINITIONAL_REPRESENTATION('',(#6982),#6991);+#6982 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6983,#6984,#6985,#6986,#6987,+ #6988,#6989,#6990),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.395963447743,+ 1.),.UNSPECIFIED.);+#6983 = CARTESIAN_POINT('',(1.,-5.E-02));+#6984 = CARTESIAN_POINT('',(0.901021997899,-5.E-02));+#6985 = CARTESIAN_POINT('',(0.802021951916,-5.E-02));+#6986 = CARTESIAN_POINT('',(0.70301091801,-5.E-02));+#6987 = CARTESIAN_POINT('',(0.452960266683,-5.E-02));+#6988 = CARTESIAN_POINT('',(0.30192077779,-5.E-02));+#6989 = CARTESIAN_POINT('',(0.150921000133,-5.E-02));+#6990 = CARTESIAN_POINT('',(0.,-5.E-02));+#6991 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6992 = ORIENTED_EDGE('',*,*,#6993,.F.);+#6993 = EDGE_CURVE('',#6994,#6949,#6996,.T.);+#6994 = VERTEX_POINT('',#6995);+#6995 = CARTESIAN_POINT('',(0.525239897228,3.810918898806E-04,1.02));+#6996 = SURFACE_CURVE('',#6997,(#7003,#7012),.PCURVE_S1.);+#6997 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6998,#6999,#7000,#7001,#7002),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6998 = CARTESIAN_POINT('',(0.525239897228,3.810918898806E-04,1.02));+#6999 = CARTESIAN_POINT('',(0.525239897228,-2.633496921603E-02,1.02));+#7000 = CARTESIAN_POINT('',(0.522124786124,-4.87831184984E-02,1.02));+#7001 = CARTESIAN_POINT('',(0.515868701093,-6.690991093901E-02,1.02));+#7002 = CARTESIAN_POINT('',(0.506471121652,-8.069620768229E-02,1.02));+#7003 = PCURVE('',#1723,#7004);+#7004 = DEFINITIONAL_REPRESENTATION('',(#7005),#7011);+#7005 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7006,#7007,#7008,#7009,#7010),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7006 = CARTESIAN_POINT('',(1.48961890811,2.015239897228));+#7007 = CARTESIAN_POINT('',(1.516334969216,2.015239897228));+#7008 = CARTESIAN_POINT('',(1.538783118498,2.012124786124));+#7009 = CARTESIAN_POINT('',(1.556909910939,2.005868701093));+#7010 = CARTESIAN_POINT('',(1.570696207682,1.996471121652));+#7011 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7012 = PCURVE('',#7013,#7020);+#7013 = SURFACE_OF_LINEAR_EXTRUSION('',#7014,#7018);+#7014 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7015,#7016,#7017),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7015 = CARTESIAN_POINT('',(0.506471121652,-8.069620768229E-02,1.07));+#7016 = CARTESIAN_POINT('',(0.525239897228,-5.316231863839E-02,1.07));+#7017 = CARTESIAN_POINT('',(0.525239897228,3.810918898806E-04,1.07));+#7018 = VECTOR('',#7019,1.);+#7019 = DIRECTION('',(0.,0.,1.));+#7020 = DEFINITIONAL_REPRESENTATION('',(#7021),#7027);+#7021 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7022,#7023,#7024,#7025,#7026),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7022 = CARTESIAN_POINT('',(1.,-5.E-02));+#7023 = CARTESIAN_POINT('',(0.750519617238,-5.E-02));+#7024 = CARTESIAN_POINT('',(0.500581960361,-5.E-02));+#7025 = CARTESIAN_POINT('',(0.250351425498,-5.E-02));+#7026 = CARTESIAN_POINT('',(0.,-5.E-02));+#7027 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7028 = ORIENTED_EDGE('',*,*,#7029,.F.);+#7029 = EDGE_CURVE('',#7030,#6994,#7032,.T.);+#7030 = VERTEX_POINT('',#7031);+#7031 = CARTESIAN_POINT('',(0.500087832496,-2.886771065848E-02,1.02));+#7032 = SURFACE_CURVE('',#7033,(#7042,#7054),.PCURVE_S1.);+#7033 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7034,#7035,#7036,#7037,#7038,+ #7039,#7040,#7041),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.206991565936,+ 1.),.UNSPECIFIED.);+#7034 = CARTESIAN_POINT('',(0.500087832496,-2.886771065848E-02,1.02));+#7035 = CARTESIAN_POINT('',(0.501764148032,-2.78126179389E-02,1.02));+#7036 = CARTESIAN_POINT('',(0.503388766997,-2.66942418705E-02,1.02));+#7037 = CARTESIAN_POINT('',(0.504961681403,-2.55125842787E-02,1.02));+#7038 = CARTESIAN_POINT('',(0.512310793274,-1.949816312278E-02,1.02));+#7039 = CARTESIAN_POINT('',(0.517379727163,-1.379993403178E-02,1.02));+#7040 = CARTESIAN_POINT('',(0.521689368312,-7.173224953671E-03,1.02));+#7041 = CARTESIAN_POINT('',(0.525239897228,3.810918898806E-04,1.02));+#7042 = PCURVE('',#1723,#7043);+#7043 = DEFINITIONAL_REPRESENTATION('',(#7044),#7053);+#7044 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7045,#7046,#7047,#7048,#7049,+ #7050,#7051,#7052),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.206991565936,+ 1.),.UNSPECIFIED.);+#7045 = CARTESIAN_POINT('',(1.518867710658,1.990087832496));+#7046 = CARTESIAN_POINT('',(1.517812617939,1.991764148032));+#7047 = CARTESIAN_POINT('',(1.51669424187,1.993388766997));+#7048 = CARTESIAN_POINT('',(1.515512584279,1.994961681403));+#7049 = CARTESIAN_POINT('',(1.509498163123,2.002310793274));+#7050 = CARTESIAN_POINT('',(1.503799934032,2.007379727163));+#7051 = CARTESIAN_POINT('',(1.497173224954,2.011689368312));+#7052 = CARTESIAN_POINT('',(1.48961890811,2.015239897228));+#7053 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7054 = PCURVE('',#7055,#7062);+#7055 = SURFACE_OF_LINEAR_EXTRUSION('',#7056,#7060);+#7056 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7057,#7058,#7059),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7057 = CARTESIAN_POINT('',(0.525239897228,3.810918898806E-04,1.07));+#7058 = CARTESIAN_POINT('',(0.516284237816,-1.867350260417E-02,1.07));+#7059 = CARTESIAN_POINT('',(0.500087832496,-2.886771065848E-02,1.07));+#7060 = VECTOR('',#7061,1.);+#7061 = DIRECTION('',(0.,0.,1.));+#7062 = DEFINITIONAL_REPRESENTATION('',(#7063),#7072);+#7063 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7064,#7065,#7066,#7067,#7068,+ #7069,#7070,#7071),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.206991565936,+ 1.),.UNSPECIFIED.);+#7064 = CARTESIAN_POINT('',(1.,-5.E-02));+#7065 = CARTESIAN_POINT('',(0.948250383259,-5.E-02));+#7066 = CARTESIAN_POINT('',(0.896500382166,-5.E-02));+#7067 = CARTESIAN_POINT('',(0.844750189984,-5.E-02));+#7068 = CARTESIAN_POINT('',(0.594739085668,-5.E-02));+#7069 = CARTESIAN_POINT('',(0.396478202599,-5.E-02));+#7070 = CARTESIAN_POINT('',(0.1982282238,-5.E-02));+#7071 = CARTESIAN_POINT('',(0.,-5.E-02));+#7072 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7073 = ORIENTED_EDGE('',*,*,#7074,.F.);+#7074 = EDGE_CURVE('',#7075,#7030,#7077,.T.);+#7075 = VERTEX_POINT('',#7076);+#7076 = CARTESIAN_POINT('',(0.462931373233,-3.90619187128E-02,1.02));+#7077 = SURFACE_CURVE('',#7078,(#7084,#7093),.PCURVE_S1.);+#7078 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7079,#7080,#7081,#7082,#7083),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7079 = CARTESIAN_POINT('',(0.462931373233,-3.90619187128E-02,1.02));+#7080 = CARTESIAN_POINT('',(0.473410194049,-3.90619187128E-02,1.02));+#7081 = CARTESIAN_POINT('',(0.483096648781,-3.73632751815E-02,1.02));+#7082 = CARTESIAN_POINT('',(0.491989380213,-3.396497180171E-02,1.02));+#7083 = CARTESIAN_POINT('',(0.500087832496,-2.886771065848E-02,1.02));+#7084 = PCURVE('',#1723,#7085);+#7085 = DEFINITIONAL_REPRESENTATION('',(#7086),#7092);+#7086 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7087,#7088,#7089,#7090,#7091),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7087 = CARTESIAN_POINT('',(1.529061918713,1.952931373233));+#7088 = CARTESIAN_POINT('',(1.529061918713,1.963410194049));+#7089 = CARTESIAN_POINT('',(1.527363275182,1.973096648781));+#7090 = CARTESIAN_POINT('',(1.523964971802,1.981989380213));+#7091 = CARTESIAN_POINT('',(1.518867710658,1.990087832496));+#7092 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7093 = PCURVE('',#7094,#7101);+#7094 = SURFACE_OF_LINEAR_EXTRUSION('',#7095,#7099);+#7095 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7096,#7097,#7098),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7096 = CARTESIAN_POINT('',(0.500087832496,-2.886771065848E-02,1.07));+#7097 = CARTESIAN_POINT('',(0.483891427176,-3.90619187128E-02,1.07));+#7098 = CARTESIAN_POINT('',(0.462931373233,-3.90619187128E-02,1.07));+#7099 = VECTOR('',#7100,1.);+#7100 = DIRECTION('',(0.,0.,1.));+#7101 = DEFINITIONAL_REPRESENTATION('',(#7102),#7108);+#7102 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7103,#7104,#7105,#7106,#7107),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7103 = CARTESIAN_POINT('',(1.,-5.E-02));+#7104 = CARTESIAN_POINT('',(0.750028772729,-5.E-02));+#7105 = CARTESIAN_POINT('',(0.500024325708,-5.E-02));+#7106 = CARTESIAN_POINT('',(0.250007706144,-5.E-02));+#7107 = CARTESIAN_POINT('',(0.,-5.E-02));+#7108 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7109 = ORIENTED_EDGE('',*,*,#7110,.F.);+#7110 = EDGE_CURVE('',#7111,#7075,#7113,.T.);+#7111 = VERTEX_POINT('',#7112);+#7112 = CARTESIAN_POINT('',(0.39919375465,-1.371930803571E-02,1.02));+#7113 = SURFACE_CURVE('',#7114,(#7123,#7135),.PCURVE_S1.);+#7114 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7115,#7116,#7117,#7118,#7119,+ #7120,#7121,#7122),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.227936467864,+ 1.),.UNSPECIFIED.);+#7115 = CARTESIAN_POINT('',(0.39919375465,-1.371930803571E-02,1.02));+#7116 = CARTESIAN_POINT('',(0.401767667223,-1.66081719356E-02,1.02));+#7117 = CARTESIAN_POINT('',(0.404502693485,-1.927769162819E-02,1.02));+#7118 = CARTESIAN_POINT('',(0.40739879465,-2.172770216694E-02,1.02));+#7119 = CARTESIAN_POINT('',(0.420810739649,-3.151299929375E-02,1.02));+#7120 = CARTESIAN_POINT('',(0.433012436806,-3.654856728203E-02,1.02));+#7121 = CARTESIAN_POINT('',(0.447056860433,-3.90619187128E-02,1.02));+#7122 = CARTESIAN_POINT('',(0.462931373233,-3.90619187128E-02,1.02));+#7123 = PCURVE('',#1723,#7124);+#7124 = DEFINITIONAL_REPRESENTATION('',(#7125),#7134);+#7125 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7126,#7127,#7128,#7129,#7130,+ #7131,#7132,#7133),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.227936467864,+ 1.),.UNSPECIFIED.);+#7126 = CARTESIAN_POINT('',(1.503719308036,1.88919375465));+#7127 = CARTESIAN_POINT('',(1.506608171936,1.891767667223));+#7128 = CARTESIAN_POINT('',(1.509277691628,1.894502693485));+#7129 = CARTESIAN_POINT('',(1.511727702167,1.89739879465));+#7130 = CARTESIAN_POINT('',(1.521512999294,1.910810739649));+#7131 = CARTESIAN_POINT('',(1.526548567282,1.923012436806));+#7132 = CARTESIAN_POINT('',(1.529061918713,1.937056860433));+#7133 = CARTESIAN_POINT('',(1.529061918713,1.952931373233));+#7134 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7135 = PCURVE('',#7136,#7143);+#7136 = SURFACE_OF_LINEAR_EXTRUSION('',#7137,#7141);+#7137 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7138,#7139,#7140),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7138 = CARTESIAN_POINT('',(0.462931373233,-3.90619187128E-02,1.07));+#7139 = CARTESIAN_POINT('',(0.421773449126,-3.90619187128E-02,1.07));+#7140 = CARTESIAN_POINT('',(0.39919375465,-1.371930803571E-02,1.07));+#7141 = VECTOR('',#7142,1.);+#7142 = DIRECTION('',(0.,0.,1.));+#7143 = DEFINITIONAL_REPRESENTATION('',(#7144),#7153);+#7144 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7145,#7146,#7147,#7148,#7149,+ #7150,#7151,#7152),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.227936467864,+ 1.),.UNSPECIFIED.);+#7145 = CARTESIAN_POINT('',(1.,-5.E-02));+#7146 = CARTESIAN_POINT('',(0.943003821968,-5.E-02));+#7147 = CARTESIAN_POINT('',(0.886003802092,-5.E-02));+#7148 = CARTESIAN_POINT('',(0.82900188054,-5.E-02));+#7149 = CARTESIAN_POINT('',(0.578923948413,-5.E-02));+#7150 = CARTESIAN_POINT('',(0.385848309719,-5.E-02));+#7151 = CARTESIAN_POINT('',(0.192848803049,-5.E-02));+#7152 = CARTESIAN_POINT('',(0.,-5.E-02));+#7153 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7154 = ORIENTED_EDGE('',*,*,#7155,.F.);+#7155 = EDGE_CURVE('',#7156,#7111,#7158,.T.);+#7156 = VERTEX_POINT('',#7157);+#7157 = CARTESIAN_POINT('',(0.376614060175,5.811651320684E-02,1.02));+#7158 = SURFACE_CURVE('',#7159,(#7165,#7174),.PCURVE_S1.);+#7159 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7160,#7161,#7162,#7163,#7164),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7160 = CARTESIAN_POINT('',(0.376614060175,5.811651320684E-02,1.02));+#7161 = CARTESIAN_POINT('',(0.376614060175,3.490055587575E-02,1.02));+#7162 = CARTESIAN_POINT('',(0.380367408086,1.517023555845E-02,1.02));+#7163 = CARTESIAN_POINT('',(0.387896154002,-1.039300556943E-03,1.02));+#7164 = CARTESIAN_POINT('',(0.39919375465,-1.371930803571E-02,1.02));+#7165 = PCURVE('',#1723,#7166);+#7166 = DEFINITIONAL_REPRESENTATION('',(#7167),#7173);+#7167 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7168,#7169,#7170,#7171,#7172),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7168 = CARTESIAN_POINT('',(1.431883486793,1.866614060175));+#7169 = CARTESIAN_POINT('',(1.455099444124,1.866614060175));+#7170 = CARTESIAN_POINT('',(1.474829764442,1.870367408086));+#7171 = CARTESIAN_POINT('',(1.491039300557,1.877896154002));+#7172 = CARTESIAN_POINT('',(1.503719308036,1.88919375465));+#7173 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7174 = PCURVE('',#7175,#7182);+#7175 = SURFACE_OF_LINEAR_EXTRUSION('',#7176,#7180);+#7176 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7177,#7178,#7179),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7177 = CARTESIAN_POINT('',(0.39919375465,-1.371930803571E-02,1.07));+#7178 = CARTESIAN_POINT('',(0.376614060175,1.162330264137E-02,1.07));+#7179 = CARTESIAN_POINT('',(0.376614060175,5.811651320684E-02,1.07));+#7180 = VECTOR('',#7181,1.);+#7181 = DIRECTION('',(0.,0.,1.));+#7182 = DEFINITIONAL_REPRESENTATION('',(#7183),#7189);+#7183 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7184,#7185,#7186,#7187,#7188),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7184 = CARTESIAN_POINT('',(1.,-5.E-02));+#7185 = CARTESIAN_POINT('',(0.750329595991,-5.E-02));+#7186 = CARTESIAN_POINT('',(0.50033487332,-5.E-02));+#7187 = CARTESIAN_POINT('',(0.250171689893,-5.E-02));+#7188 = CARTESIAN_POINT('',(0.,-5.E-02));+#7189 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7190 = ORIENTED_EDGE('',*,*,#7191,.F.);+#7191 = EDGE_CURVE('',#7192,#7156,#7194,.T.);+#7192 = VERTEX_POINT('',#7193);+#7193 = CARTESIAN_POINT('',(0.399765392485,0.129285423642,1.02));+#7194 = SURFACE_CURVE('',#7195,(#7201,#7210),.PCURVE_S1.);+#7195 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7196,#7197,#7198,#7199,#7200),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7196 = CARTESIAN_POINT('',(0.399765392485,0.129285423642,1.02));+#7197 = CARTESIAN_POINT('',(0.388182654696,0.116654042926,1.02));+#7198 = CARTESIAN_POINT('',(0.380462980373,0.100572485377,1.02));+#7199 = CARTESIAN_POINT('',(0.376614060175,8.10486658335E-02,1.02));+#7200 = CARTESIAN_POINT('',(0.376614060175,5.811651320684E-02,1.02));+#7201 = PCURVE('',#1723,#7202);+#7202 = DEFINITIONAL_REPRESENTATION('',(#7203),#7209);+#7203 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7204,#7205,#7206,#7207,#7208),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7204 = CARTESIAN_POINT('',(1.360714576358,1.889765392485));+#7205 = CARTESIAN_POINT('',(1.373345957074,1.878182654696));+#7206 = CARTESIAN_POINT('',(1.389427514623,1.870462980373));+#7207 = CARTESIAN_POINT('',(1.408951334167,1.866614060175));+#7208 = CARTESIAN_POINT('',(1.431883486793,1.866614060175));+#7209 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7210 = PCURVE('',#7211,#7218);+#7211 = SURFACE_OF_LINEAR_EXTRUSION('',#7212,#7216);+#7212 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7213,#7214,#7215),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7213 = CARTESIAN_POINT('',(0.376614060175,5.811651320684E-02,1.07));+#7214 = CARTESIAN_POINT('',(0.376614060175,0.104038085937,1.07));+#7215 = CARTESIAN_POINT('',(0.399765392485,0.129285423642,1.07));+#7216 = VECTOR('',#7217,1.);+#7217 = DIRECTION('',(0.,0.,1.));+#7218 = DEFINITIONAL_REPRESENTATION('',(#7219),#7225);+#7219 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7220,#7221,#7222,#7223,#7224),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7220 = CARTESIAN_POINT('',(1.,-5.E-02));+#7221 = CARTESIAN_POINT('',(0.749847273718,-5.E-02));+#7222 = CARTESIAN_POINT('',(0.499689699389,-5.E-02));+#7223 = CARTESIAN_POINT('',(0.249688232164,-5.E-02));+#7224 = CARTESIAN_POINT('',(0.,-5.E-02));+#7225 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7226 = ORIENTED_EDGE('',*,*,#7227,.F.);+#7227 = EDGE_CURVE('',#7228,#7192,#7230,.T.);+#7228 = VERTEX_POINT('',#7229);+#7229 = CARTESIAN_POINT('',(0.465217924572,0.154532761347,1.02));+#7230 = SURFACE_CURVE('',#7231,(#7240,#7252),.PCURVE_S1.);+#7231 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7232,#7233,#7234,#7235,#7236,+ #7237,#7238,#7239),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.804064646289,+ 1.),.UNSPECIFIED.);+#7232 = CARTESIAN_POINT('',(0.465217924572,0.154532761347,1.02));+#7233 = CARTESIAN_POINT('',(0.448227537673,0.154532761347,1.02));+#7234 = CARTESIAN_POINT('',(0.433282069341,0.151817419138,1.02));+#7235 = CARTESIAN_POINT('',(0.420396771903,0.146376168783,1.02));+#7236 = CARTESIAN_POINT('',(0.406939650148,0.136223141258,1.02));+#7237 = CARTESIAN_POINT('',(0.404425538599,0.134072144584,1.02));+#7238 = CARTESIAN_POINT('',(0.402034109313,0.131759538701,1.02));+#7239 = CARTESIAN_POINT('',(0.399765392485,0.129285423642,1.02));+#7240 = PCURVE('',#1723,#7241);+#7241 = DEFINITIONAL_REPRESENTATION('',(#7242),#7251);+#7242 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7243,#7244,#7245,#7246,#7247,+ #7248,#7249,#7250),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.804064646289,+ 1.),.UNSPECIFIED.);+#7243 = CARTESIAN_POINT('',(1.335467238653,1.955217924572));+#7244 = CARTESIAN_POINT('',(1.335467238653,1.938227537673));+#7245 = CARTESIAN_POINT('',(1.338182580862,1.923282069341));+#7246 = CARTESIAN_POINT('',(1.343623831217,1.910396771903));+#7247 = CARTESIAN_POINT('',(1.353776858742,1.896939650148));+#7248 = CARTESIAN_POINT('',(1.355927855416,1.894425538599));+#7249 = CARTESIAN_POINT('',(1.358240461299,1.892034109313));+#7250 = CARTESIAN_POINT('',(1.360714576358,1.889765392485));+#7251 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7252 = PCURVE('',#7253,#7260);+#7253 = SURFACE_OF_LINEAR_EXTRUSION('',#7254,#7258);+#7254 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7255,#7256,#7257),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7255 = CARTESIAN_POINT('',(0.399765392485,0.129285423642,1.07));+#7256 = CARTESIAN_POINT('',(0.422916724795,0.154532761347,1.07));+#7257 = CARTESIAN_POINT('',(0.465217924572,0.154532761347,1.07));+#7258 = VECTOR('',#7259,1.);+#7259 = DIRECTION('',(0.,0.,1.));+#7260 = DEFINITIONAL_REPRESENTATION('',(#7261),#7270);+#7261 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7262,#7263,#7264,#7265,#7266,+ #7267,#7268,#7269),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.804064646289,+ 1.),.UNSPECIFIED.);+#7262 = CARTESIAN_POINT('',(1.,-5.E-02));+#7263 = CARTESIAN_POINT('',(0.7991736997,-5.E-02));+#7264 = CARTESIAN_POINT('',(0.598174320589,-5.E-02));+#7265 = CARTESIAN_POINT('',(0.397087417747,-5.E-02));+#7266 = CARTESIAN_POINT('',(0.14699879779,-5.E-02));+#7267 = CARTESIAN_POINT('',(9.799756076101E-02,-5.E-02));+#7268 = CARTESIAN_POINT('',(4.899754358613E-02,-5.E-02));+#7269 = CARTESIAN_POINT('',(0.,-5.E-02));+#7270 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7271 = ORIENTED_EDGE('',*,*,#7272,.F.);+#7272 = EDGE_CURVE('',#7273,#7228,#7275,.T.);+#7273 = VERTEX_POINT('',#7274);+#7274 = CARTESIAN_POINT('',(0.537815929594,0.118900669643,1.02));+#7275 = SURFACE_CURVE('',#7276,(#7285,#7297),.PCURVE_S1.);+#7276 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7277,#7278,#7279,#7280,#7281,+ #7282,#7283,#7284),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.334903529201,+ 1.),.UNSPECIFIED.);+#7277 = CARTESIAN_POINT('',(0.537815929594,0.118900669643,1.02));+#7278 = CARTESIAN_POINT('',(0.533955167329,0.124867302235,1.02));+#7279 = CARTESIAN_POINT('',(0.529598169915,0.130169599007,1.02));+#7280 = CARTESIAN_POINT('',(0.524744849288,0.134805812001,1.02));+#7281 = CARTESIAN_POINT('',(0.508773509548,0.146658621081,1.02));+#7282 = CARTESIAN_POINT('',(0.49619664585,0.151912593663,1.02));+#7283 = CARTESIAN_POINT('',(0.481671617936,0.154532761347,1.02));+#7284 = CARTESIAN_POINT('',(0.465217924572,0.154532761347,1.02));+#7285 = PCURVE('',#1723,#7286);+#7286 = DEFINITIONAL_REPRESENTATION('',(#7287),#7296);+#7287 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7288,#7289,#7290,#7291,#7292,+ #7293,#7294,#7295),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.334903529201,+ 1.),.UNSPECIFIED.);+#7288 = CARTESIAN_POINT('',(1.371099330357,2.027815929594));+#7289 = CARTESIAN_POINT('',(1.365132697765,2.023955167329));+#7290 = CARTESIAN_POINT('',(1.359830400993,2.019598169915));+#7291 = CARTESIAN_POINT('',(1.355194187999,2.014744849288));+#7292 = CARTESIAN_POINT('',(1.343341378919,1.998773509548));+#7293 = CARTESIAN_POINT('',(1.338087406337,1.98619664585));+#7294 = CARTESIAN_POINT('',(1.335467238653,1.971671617936));+#7295 = CARTESIAN_POINT('',(1.335467238653,1.955217924572));+#7296 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7297 = PCURVE('',#7298,#7305);+#7298 = SURFACE_OF_LINEAR_EXTRUSION('',#7299,#7303);+#7299 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7300,#7301,#7302),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7300 = CARTESIAN_POINT('',(0.465217924572,0.154532761347,1.07));+#7301 = CARTESIAN_POINT('',(0.514759870257,0.154532761347,1.07));+#7302 = CARTESIAN_POINT('',(0.537815929594,0.118900669643,1.07));+#7303 = VECTOR('',#7304,1.);+#7304 = DIRECTION('',(0.,0.,1.));+#7305 = DEFINITIONAL_REPRESENTATION('',(#7306),#7315);+#7306 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7307,#7308,#7309,#7310,#7311,+ #7312,#7313,#7314),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.334903529201,+ 1.),.UNSPECIFIED.);+#7307 = CARTESIAN_POINT('',(1.,-5.E-02));+#7308 = CARTESIAN_POINT('',(0.916274455042,-5.E-02));+#7309 = CARTESIAN_POINT('',(0.832524445646,-5.E-02));+#7310 = CARTESIAN_POINT('',(0.748762196005,-5.E-02));+#7311 = CARTESIAN_POINT('',(0.498653765661,-5.E-02));+#7312 = CARTESIAN_POINT('',(0.332307624336,-5.E-02));+#7313 = CARTESIAN_POINT('',(0.166058207207,-5.E-02));+#7314 = CARTESIAN_POINT('',(0.,-5.E-02));+#7315 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7316 = ORIENTED_EDGE('',*,*,#7317,.F.);+#7317 = EDGE_CURVE('',#7318,#7273,#7320,.T.);+#7318 = VERTEX_POINT('',#7319);+#7319 = CARTESIAN_POINT('',(0.560871988932,6.859654017857E-03,1.02));+#7320 = SURFACE_CURVE('',#7321,(#7327,#7336),.PCURVE_S1.);+#7321 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7322,#7323,#7324,#7325,#7326),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7322 = CARTESIAN_POINT('',(0.560871988932,6.859654017857E-03,1.02));+#7323 = CARTESIAN_POINT('',(0.560871988932,4.488554602047E-02,1.02));+#7324 = CARTESIAN_POINT('',(0.557065314774,7.633277301555E-02,1.02));+#7325 = CARTESIAN_POINT('',(0.549381695303,0.101026304458,1.02));+#7326 = CARTESIAN_POINT('',(0.537815929594,0.118900669643,1.02));+#7327 = PCURVE('',#1723,#7328);+#7328 = DEFINITIONAL_REPRESENTATION('',(#7329),#7335);+#7329 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7330,#7331,#7332,#7333,#7334),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7330 = CARTESIAN_POINT('',(1.483140345982,2.050871988932));+#7331 = CARTESIAN_POINT('',(1.44511445398,2.050871988932));+#7332 = CARTESIAN_POINT('',(1.413667226984,2.047065314774));+#7333 = CARTESIAN_POINT('',(1.388973695542,2.039381695303));+#7334 = CARTESIAN_POINT('',(1.371099330357,2.027815929594));+#7335 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7336 = PCURVE('',#7337,#7344);+#7337 = SURFACE_OF_LINEAR_EXTRUSION('',#7338,#7342);+#7338 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7339,#7340,#7341),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7339 = CARTESIAN_POINT('',(0.537815929594,0.118900669643,1.07));+#7340 = CARTESIAN_POINT('',(0.560871988932,8.326857793899E-02,1.07));+#7341 = CARTESIAN_POINT('',(0.560871988932,6.859654017857E-03,1.07));+#7342 = VECTOR('',#7343,1.);+#7343 = DIRECTION('',(0.,0.,1.));+#7344 = DEFINITIONAL_REPRESENTATION('',(#7345),#7351);+#7345 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7346,#7347,#7348,#7349,#7350),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7346 = CARTESIAN_POINT('',(1.,-5.E-02));+#7347 = CARTESIAN_POINT('',(0.751168515069,-5.E-02));+#7348 = CARTESIAN_POINT('',(0.501330602972,-5.E-02));+#7349 = CARTESIAN_POINT('',(0.250818354051,-5.E-02));+#7350 = CARTESIAN_POINT('',(0.,-5.E-02));+#7351 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7352 = ORIENTED_EDGE('',*,*,#7353,.F.);+#7353 = EDGE_CURVE('',#7354,#7318,#7356,.T.);+#7354 = VERTEX_POINT('',#7355);+#7355 = CARTESIAN_POINT('',(0.533147553943,-0.102799537295,1.02));+#7356 = SURFACE_CURVE('',#7357,(#7363,#7372),.PCURVE_S1.);+#7357 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7358,#7359,#7360,#7361,#7362),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7358 = CARTESIAN_POINT('',(0.533147553943,-0.102799537295,1.02));+#7359 = CARTESIAN_POINT('',(0.547041578878,-8.384445860417E-02,1.02));+#7360 = CARTESIAN_POINT('',(0.556284020473,-5.920739593732E-02,1.02));+#7361 = CARTESIAN_POINT('',(0.560871988932,-2.893116545322E-02,1.02));+#7362 = CARTESIAN_POINT('',(0.560871988932,6.859654017857E-03,1.02));+#7363 = PCURVE('',#1723,#7364);+#7364 = DEFINITIONAL_REPRESENTATION('',(#7365),#7371);+#7365 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7366,#7367,#7368,#7369,#7370),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7366 = CARTESIAN_POINT('',(1.592799537295,2.023147553943));+#7367 = CARTESIAN_POINT('',(1.573844458604,2.037041578878));+#7368 = CARTESIAN_POINT('',(1.549207395937,2.046284020473));+#7369 = CARTESIAN_POINT('',(1.518931165453,2.050871988932));+#7370 = CARTESIAN_POINT('',(1.483140345982,2.050871988932));+#7371 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7372 = PCURVE('',#7373,#7380);+#7373 = SURFACE_OF_LINEAR_EXTRUSION('',#7374,#7378);+#7374 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7375,#7376,#7377),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7375 = CARTESIAN_POINT('',(0.560871988932,6.859654017857E-03,1.07));+#7376 = CARTESIAN_POINT('',(0.560871988932,-6.49761672247E-02,1.07));+#7377 = CARTESIAN_POINT('',(0.533147553943,-0.102799537295,1.07));+#7378 = VECTOR('',#7379,1.);+#7379 = DIRECTION('',(0.,0.,1.));+#7380 = DEFINITIONAL_REPRESENTATION('',(#7381),#7387);+#7381 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7382,#7383,#7384,#7385,#7386),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7382 = CARTESIAN_POINT('',(1.,-5.E-02));+#7383 = CARTESIAN_POINT('',(0.749426364496,-5.E-02));+#7384 = CARTESIAN_POINT('',(0.499023936388,-5.E-02));+#7385 = CARTESIAN_POINT('',(0.249115405462,-5.E-02));+#7386 = CARTESIAN_POINT('',(0.,-5.E-02));+#7387 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7388 = ORIENTED_EDGE('',*,*,#7389,.F.);+#7389 = EDGE_CURVE('',#7390,#7354,#7392,.T.);+#7390 = VERTEX_POINT('',#7391);+#7391 = CARTESIAN_POINT('',(0.452641892206,-0.140622907366,1.02));+#7392 = SURFACE_CURVE('',#7393,(#7399,#7408),.PCURVE_S1.);+#7393 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7394,#7395,#7396,#7397,#7398),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7394 = CARTESIAN_POINT('',(0.452641892206,-0.140622907366,1.02));+#7395 = CARTESIAN_POINT('',(0.478999247113,-0.140622907366,1.02));+#7396 = CARTESIAN_POINT('',(0.501237019157,-0.13433493077,1.02));+#7397 = CARTESIAN_POINT('',(0.519286713942,-0.12170934307,1.02));+#7398 = CARTESIAN_POINT('',(0.533147553943,-0.102799537295,1.02));+#7399 = PCURVE('',#1723,#7400);+#7400 = DEFINITIONAL_REPRESENTATION('',(#7401),#7407);+#7401 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7402,#7403,#7404,#7405,#7406),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7402 = CARTESIAN_POINT('',(1.630622907366,1.942641892206));+#7403 = CARTESIAN_POINT('',(1.630622907366,1.968999247113));+#7404 = CARTESIAN_POINT('',(1.62433493077,1.991237019157));+#7405 = CARTESIAN_POINT('',(1.61170934307,2.009286713942));+#7406 = CARTESIAN_POINT('',(1.592799537295,2.023147553943));+#7407 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7408 = PCURVE('',#7409,#7416);+#7409 = SURFACE_OF_LINEAR_EXTRUSION('',#7410,#7414);+#7410 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7411,#7412,#7413),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7411 = CARTESIAN_POINT('',(0.533147553943,-0.102799537295,1.07));+#7412 = CARTESIAN_POINT('',(0.505423118955,-0.140622907366,1.07));+#7413 = CARTESIAN_POINT('',(0.452641892206,-0.140622907366,1.07));+#7414 = VECTOR('',#7415,1.);+#7415 = DIRECTION('',(0.,0.,1.));+#7416 = DEFINITIONAL_REPRESENTATION('',(#7417),#7423);+#7417 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7418,#7419,#7420,#7421,#7422),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7418 = CARTESIAN_POINT('',(1.,-5.E-02));+#7419 = CARTESIAN_POINT('',(0.750315059628,-5.E-02));+#7420 = CARTESIAN_POINT('',(0.500194323697,-5.E-02));+#7421 = CARTESIAN_POINT('',(0.249975157418,-5.E-02));+#7422 = CARTESIAN_POINT('',(0.,-5.E-02));+#7423 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7424 = ORIENTED_EDGE('',*,*,#7425,.F.);+#7425 = EDGE_CURVE('',#6815,#7390,#7426,.T.);+#7426 = SURFACE_CURVE('',#7427,(#7433,#7442),.PCURVE_S1.);+#7427 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7428,#7429,#7430,#7431,#7432),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7428 = CARTESIAN_POINT('',(0.4246316383,-0.137669445219,1.02));+#7429 = CARTESIAN_POINT('',(0.431681718649,-0.139146151239,1.02));+#7430 = CARTESIAN_POINT('',(0.43870014958,-0.140130652716,1.02));+#7431 = CARTESIAN_POINT('',(0.445686887796,-0.140622907366,1.02));+#7432 = CARTESIAN_POINT('',(0.452641892206,-0.140622907366,1.02));+#7433 = PCURVE('',#1723,#7434);+#7434 = DEFINITIONAL_REPRESENTATION('',(#7435),#7441);+#7435 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7436,#7437,#7438,#7439,#7440),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7436 = CARTESIAN_POINT('',(1.627669445219,1.9146316383));+#7437 = CARTESIAN_POINT('',(1.629146151239,1.921681718649));+#7438 = CARTESIAN_POINT('',(1.630130652716,1.92870014958));+#7439 = CARTESIAN_POINT('',(1.630622907366,1.935686887796));+#7440 = CARTESIAN_POINT('',(1.630622907366,1.942641892206));+#7441 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7442 = PCURVE('',#7443,#7450);+#7443 = SURFACE_OF_LINEAR_EXTRUSION('',#7444,#7448);+#7444 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7445,#7446,#7447),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7445 = CARTESIAN_POINT('',(0.452641892206,-0.140622907366,1.07));+#7446 = CARTESIAN_POINT('',(0.438732038225,-0.140622907366,1.07));+#7447 = CARTESIAN_POINT('',(0.4246316383,-0.137669445219,1.07));+#7448 = VECTOR('',#7449,1.);+#7449 = DIRECTION('',(0.,0.,1.));+#7450 = DEFINITIONAL_REPRESENTATION('',(#7451),#7457);+#7451 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7452,#7453,#7454,#7455,#7456),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7452 = CARTESIAN_POINT('',(1.,-5.E-02));+#7453 = CARTESIAN_POINT('',(0.750004241506,-5.E-02));+#7454 = CARTESIAN_POINT('',(0.500004683048,-5.E-02));+#7455 = CARTESIAN_POINT('',(0.250002782922,-5.E-02));+#7456 = CARTESIAN_POINT('',(0.,-5.E-02));+#7457 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7458 = FACE_BOUND('',#7459,.T.);+#7459 = EDGE_LOOP('',(#7460,#7488,#7514,#7540,#7566,#7592,#7618,#7644,+ #7670,#7696,#7722));+#7460 = ORIENTED_EDGE('',*,*,#7461,.T.);+#7461 = EDGE_CURVE('',#7462,#7464,#7466,.T.);+#7462 = VERTEX_POINT('',#7463);+#7463 = CARTESIAN_POINT('',(0.795815139044,-0.135097074963,1.02));+#7464 = VERTEX_POINT('',#7465);+#7465 = CARTESIAN_POINT('',(0.638805280413,-0.135097074963,1.02));+#7466 = SURFACE_CURVE('',#7467,(#7471,#7477),.PCURVE_S1.);+#7467 = LINE('',#7468,#7469);+#7468 = CARTESIAN_POINT('',(-0.347092430478,-0.135097074963,1.02));+#7469 = VECTOR('',#7470,1.);+#7470 = DIRECTION('',(-1.,0.,0.));+#7471 = PCURVE('',#1723,#7472);+#7472 = DEFINITIONAL_REPRESENTATION('',(#7473),#7476);+#7473 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7474,#7475),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.142907569522,-0.985897710891),.PIECEWISE_BEZIER_KNOTS.);+#7474 = CARTESIAN_POINT('',(1.625097074963,2.285815139044));+#7475 = CARTESIAN_POINT('',(1.625097074963,2.128805280413));+#7476 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7477 = PCURVE('',#7478,#7483);+#7478 = PLANE('',#7479);+#7479 = AXIS2_PLACEMENT_3D('',#7480,#7481,#7482);+#7480 = CARTESIAN_POINT('',(0.795815139044,-0.135097074963,1.07));+#7481 = DIRECTION('',(0.,1.,0.));+#7482 = DIRECTION('',(-1.,0.,0.));+#7483 = DEFINITIONAL_REPRESENTATION('',(#7484),#7487);+#7484 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7485,#7486),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.142907569522,-0.985897710891),.PIECEWISE_BEZIER_KNOTS.);+#7485 = CARTESIAN_POINT('',(0.,-5.E-02));+#7486 = CARTESIAN_POINT('',(0.157009858631,-5.E-02));+#7487 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7488 = ORIENTED_EDGE('',*,*,#7489,.T.);+#7489 = EDGE_CURVE('',#7464,#7490,#7492,.T.);+#7490 = VERTEX_POINT('',#7491);+#7491 = CARTESIAN_POINT('',(0.638805280413,-0.102704264323,1.02));+#7492 = SURFACE_CURVE('',#7493,(#7497,#7503),.PCURVE_S1.);+#7493 = LINE('',#7494,#7495);+#7494 = CARTESIAN_POINT('',(0.638805280413,0.677451462519,1.02));+#7495 = VECTOR('',#7496,1.);+#7496 = DIRECTION('',(0.,1.,0.));+#7497 = PCURVE('',#1723,#7498);+#7498 = DEFINITIONAL_REPRESENTATION('',(#7499),#7502);+#7499 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7500,#7501),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.812548537481,-0.780155726842),.PIECEWISE_BEZIER_KNOTS.);+#7500 = CARTESIAN_POINT('',(1.625097074963,2.128805280413));+#7501 = CARTESIAN_POINT('',(1.592704264323,2.128805280413));+#7502 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7503 = PCURVE('',#7504,#7509);+#7504 = PLANE('',#7505);+#7505 = AXIS2_PLACEMENT_3D('',#7506,#7507,#7508);+#7506 = CARTESIAN_POINT('',(0.638805280413,-0.135097074963,1.07));+#7507 = DIRECTION('',(1.,0.,0.));+#7508 = DIRECTION('',(0.,1.,0.));+#7509 = DEFINITIONAL_REPRESENTATION('',(#7510),#7513);+#7510 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7511,#7512),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.812548537481,-0.780155726842),.PIECEWISE_BEZIER_KNOTS.);+#7511 = CARTESIAN_POINT('',(0.,-5.E-02));+#7512 = CARTESIAN_POINT('',(3.239281063988E-02,-5.E-02));+#7513 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7514 = ORIENTED_EDGE('',*,*,#7515,.T.);+#7515 = EDGE_CURVE('',#7490,#7516,#7518,.T.);+#7516 = VERTEX_POINT('',#7517);+#7517 = CARTESIAN_POINT('',(0.698636707124,-0.102704264323,1.02));+#7518 = SURFACE_CURVE('',#7519,(#7523,#7529),.PCURVE_S1.);+#7519 = LINE('',#7520,#7521);+#7520 = CARTESIAN_POINT('',(-0.425597359794,-0.102704264323,1.02));+#7521 = VECTOR('',#7522,1.);+#7522 = DIRECTION('',(1.,0.,-0.));+#7523 = PCURVE('',#1723,#7524);+#7524 = DEFINITIONAL_REPRESENTATION('',(#7525),#7528);+#7525 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7526,#7527),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.064402640206,1.124234066918),.PIECEWISE_BEZIER_KNOTS.);+#7526 = CARTESIAN_POINT('',(1.592704264323,2.128805280413));+#7527 = CARTESIAN_POINT('',(1.592704264323,2.188636707124));+#7528 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7529 = PCURVE('',#7530,#7535);+#7530 = PLANE('',#7531);+#7531 = AXIS2_PLACEMENT_3D('',#7532,#7533,#7534);+#7532 = CARTESIAN_POINT('',(0.638805280413,-0.102704264323,1.07));+#7533 = DIRECTION('',(0.,-1.,0.));+#7534 = DIRECTION('',(1.,0.,0.));+#7535 = DEFINITIONAL_REPRESENTATION('',(#7536),#7539);+#7536 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7537,#7538),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.064402640206,1.124234066918),.PIECEWISE_BEZIER_KNOTS.);+#7537 = CARTESIAN_POINT('',(0.,-5.E-02));+#7538 = CARTESIAN_POINT('',(5.983142671131E-02,-5.E-02));+#7539 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7540 = ORIENTED_EDGE('',*,*,#7541,.T.);+#7541 = EDGE_CURVE('',#7516,#7542,#7544,.T.);+#7542 = VERTEX_POINT('',#7543);+#7543 = CARTESIAN_POINT('',(0.698636707124,0.114708658854,1.02));+#7544 = SURFACE_CURVE('',#7545,(#7549,#7555),.PCURVE_S1.);+#7545 = LINE('',#7546,#7547);+#7546 = CARTESIAN_POINT('',(0.698636707124,0.693647867839,1.02));+#7547 = VECTOR('',#7548,1.);+#7548 = DIRECTION('',(0.,1.,0.));+#7549 = PCURVE('',#1723,#7550);+#7550 = DEFINITIONAL_REPRESENTATION('',(#7551),#7554);+#7551 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7552,#7553),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.796352132161,-0.578939208984),.PIECEWISE_BEZIER_KNOTS.);+#7552 = CARTESIAN_POINT('',(1.592704264323,2.188636707124));+#7553 = CARTESIAN_POINT('',(1.375291341146,2.188636707124));+#7554 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7555 = PCURVE('',#7556,#7561);+#7556 = PLANE('',#7557);+#7557 = AXIS2_PLACEMENT_3D('',#7558,#7559,#7560);+#7558 = CARTESIAN_POINT('',(0.698636707124,-0.102704264323,1.07));+#7559 = DIRECTION('',(1.,0.,0.));+#7560 = DIRECTION('',(0.,1.,0.));+#7561 = DEFINITIONAL_REPRESENTATION('',(#7562),#7565);+#7562 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7563,#7564),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.796352132161,-0.578939208984),.PIECEWISE_BEZIER_KNOTS.);+#7563 = CARTESIAN_POINT('',(0.,-5.E-02));+#7564 = CARTESIAN_POINT('',(0.217412923177,-5.E-02));+#7565 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7566 = ORIENTED_EDGE('',*,*,#7567,.T.);+#7567 = EDGE_CURVE('',#7542,#7568,#7570,.T.);+#7568 = VERTEX_POINT('',#7569);+#7569 = CARTESIAN_POINT('',(0.634232177734,0.100227167039,1.02));+#7570 = SURFACE_CURVE('',#7571,(#7575,#7581),.PCURVE_S1.);+#7571 = LINE('',#7572,#7573);+#7572 = CARTESIAN_POINT('',(-0.195839746789,-8.641622427427E-02,1.02));+#7573 = VECTOR('',#7574,1.);+#7574 = DIRECTION('',(-0.97564065493,-0.219374821819,0.));+#7575 = PCURVE('',#1723,#7576);+#7576 = DEFINITIONAL_REPRESENTATION('',(#7577),#7580);+#7577 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7578,#7579),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.916809328715,-0.850796776794),.PIECEWISE_BEZIER_KNOTS.);+#7578 = CARTESIAN_POINT('',(1.375291341146,2.188636707124));+#7579 = CARTESIAN_POINT('',(1.389772832961,2.124232177734));+#7580 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7581 = PCURVE('',#7582,#7587);+#7582 = PLANE('',#7583);+#7583 = AXIS2_PLACEMENT_3D('',#7584,#7585,#7586);+#7584 = CARTESIAN_POINT('',(0.698636707124,0.114708658854,1.07));+#7585 = DIRECTION('',(-0.219374821819,0.97564065493,0.));+#7586 = DIRECTION('',(-0.97564065493,-0.219374821819,0.));+#7587 = DEFINITIONAL_REPRESENTATION('',(#7588),#7591);+#7588 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7589,#7590),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.916809328715,-0.850796776794),.PIECEWISE_BEZIER_KNOTS.);+#7589 = CARTESIAN_POINT('',(0.,-5.E-02));+#7590 = CARTESIAN_POINT('',(6.601255192108E-02,-5.E-02));+#7591 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7592 = ORIENTED_EDGE('',*,*,#7593,.T.);+#7593 = EDGE_CURVE('',#7568,#7594,#7596,.T.);+#7594 = VERTEX_POINT('',#7595);+#7595 = CARTESIAN_POINT('',(0.634232177734,0.135287620908,1.02));+#7596 = SURFACE_CURVE('',#7597,(#7601,#7607),.PCURVE_S1.);+#7597 = LINE('',#7598,#7599);+#7598 = CARTESIAN_POINT('',(0.634232177734,0.795113583519,1.02));+#7599 = VECTOR('',#7600,1.);+#7600 = DIRECTION('',(0.,1.,0.));+#7601 = PCURVE('',#1723,#7602);+#7602 = DEFINITIONAL_REPRESENTATION('',(#7603),#7606);+#7603 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7604,#7605),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.694886416481,-0.659825962612),.PIECEWISE_BEZIER_KNOTS.);+#7604 = CARTESIAN_POINT('',(1.389772832961,2.124232177734));+#7605 = CARTESIAN_POINT('',(1.354712379092,2.124232177734));+#7606 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7607 = PCURVE('',#7608,#7613);+#7608 = PLANE('',#7609);+#7609 = AXIS2_PLACEMENT_3D('',#7610,#7611,#7612);+#7610 = CARTESIAN_POINT('',(0.634232177734,0.100227167039,1.07));+#7611 = DIRECTION('',(1.,0.,0.));+#7612 = DIRECTION('',(0.,1.,0.));+#7613 = DEFINITIONAL_REPRESENTATION('',(#7614),#7617);+#7614 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7615,#7616),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.694886416481,-0.659825962612),.PIECEWISE_BEZIER_KNOTS.);+#7615 = CARTESIAN_POINT('',(0.,-5.E-02));+#7616 = CARTESIAN_POINT('',(3.506045386905E-02,-5.E-02));+#7617 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7618 = ORIENTED_EDGE('',*,*,#7619,.T.);+#7619 = EDGE_CURVE('',#7594,#7620,#7622,.T.);+#7620 = VERTEX_POINT('',#7621);+#7621 = CARTESIAN_POINT('',(0.698255615234,0.149388020833,1.02));+#7622 = SURFACE_CURVE('',#7623,(#7627,#7633),.PCURVE_S1.);+#7623 = LINE('',#7624,#7625);+#7624 = CARTESIAN_POINT('',(-0.236470975645,-5.647438311044E-02,1.02));+#7625 = VECTOR('',#7626,1.);+#7626 = DIRECTION('',(0.976595648113,0.215083565358,-0.));+#7627 = PCURVE('',#1723,#7628);+#7628 = DEFINITIONAL_REPRESENTATION('',(#7629),#7632);+#7629 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7630,#7631),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.891569765913,0.957127540642),.PIECEWISE_BEZIER_KNOTS.);+#7630 = CARTESIAN_POINT('',(1.354712379092,2.124232177734));+#7631 = CARTESIAN_POINT('',(1.340611979167,2.188255615234));+#7632 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7633 = PCURVE('',#7634,#7639);+#7634 = PLANE('',#7635);+#7635 = AXIS2_PLACEMENT_3D('',#7636,#7637,#7638);+#7636 = CARTESIAN_POINT('',(0.634232177734,0.135287620908,1.07));+#7637 = DIRECTION('',(0.215083565358,-0.976595648113,0.));+#7638 = DIRECTION('',(0.976595648113,0.215083565358,0.));+#7639 = DEFINITIONAL_REPRESENTATION('',(#7640),#7643);+#7640 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7641,#7642),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.891569765913,0.957127540642),.PIECEWISE_BEZIER_KNOTS.);+#7641 = CARTESIAN_POINT('',(0.,-5.E-02));+#7642 = CARTESIAN_POINT('',(6.555777472869E-02,-5.E-02));+#7643 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7644 = ORIENTED_EDGE('',*,*,#7645,.T.);+#7645 = EDGE_CURVE('',#7620,#7646,#7648,.T.);+#7646 = VERTEX_POINT('',#7647);+#7647 = CARTESIAN_POINT('',(0.736745896112,0.149388020833,1.02));+#7648 = SURFACE_CURVE('',#7649,(#7653,#7659),.PCURVE_S1.);+#7649 = LINE('',#7650,#7651);+#7650 = CARTESIAN_POINT('',(-0.395872192383,0.149388020833,1.02));+#7651 = VECTOR('',#7652,1.);+#7652 = DIRECTION('',(1.,0.,-0.));+#7653 = PCURVE('',#1723,#7654);+#7654 = DEFINITIONAL_REPRESENTATION('',(#7655),#7658);+#7655 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7656,#7657),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.094127807617,1.132618088495),.PIECEWISE_BEZIER_KNOTS.);+#7656 = CARTESIAN_POINT('',(1.340611979167,2.188255615234));+#7657 = CARTESIAN_POINT('',(1.340611979167,2.226745896112));+#7658 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7659 = PCURVE('',#7660,#7665);+#7660 = PLANE('',#7661);+#7661 = AXIS2_PLACEMENT_3D('',#7662,#7663,#7664);+#7662 = CARTESIAN_POINT('',(0.698255615234,0.149388020833,1.07));+#7663 = DIRECTION('',(0.,-1.,0.));+#7664 = DIRECTION('',(1.,0.,0.));+#7665 = DEFINITIONAL_REPRESENTATION('',(#7666),#7669);+#7666 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7667,#7668),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.094127807617,1.132618088495),.PIECEWISE_BEZIER_KNOTS.);+#7667 = CARTESIAN_POINT('',(0.,-5.E-02));+#7668 = CARTESIAN_POINT('',(3.849028087798E-02,-5.E-02));+#7669 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7670 = ORIENTED_EDGE('',*,*,#7671,.T.);+#7671 = EDGE_CURVE('',#7646,#7672,#7674,.T.);+#7672 = VERTEX_POINT('',#7673);+#7673 = CARTESIAN_POINT('',(0.736745896112,-0.102704264323,1.02));+#7674 = SURFACE_CURVE('',#7675,(#7679,#7685),.PCURVE_S1.);+#7675 = LINE('',#7676,#7677);+#7676 = CARTESIAN_POINT('',(0.736745896112,0.819694010417,1.02));+#7677 = VECTOR('',#7678,1.);+#7678 = DIRECTION('',(0.,-1.,0.));+#7679 = PCURVE('',#1723,#7680);+#7680 = DEFINITIONAL_REPRESENTATION('',(#7681),#7684);+#7681 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7682,#7683),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.670305989583,0.92239827474),.PIECEWISE_BEZIER_KNOTS.);+#7682 = CARTESIAN_POINT('',(1.340611979167,2.226745896112));+#7683 = CARTESIAN_POINT('',(1.592704264323,2.226745896112));+#7684 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7685 = PCURVE('',#7686,#7691);+#7686 = PLANE('',#7687);+#7687 = AXIS2_PLACEMENT_3D('',#7688,#7689,#7690);+#7688 = CARTESIAN_POINT('',(0.736745896112,0.149388020833,1.07));+#7689 = DIRECTION('',(-1.,0.,0.));+#7690 = DIRECTION('',(0.,-1.,0.));+#7691 = DEFINITIONAL_REPRESENTATION('',(#7692),#7695);+#7692 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7693,#7694),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.670305989583,0.92239827474),.PIECEWISE_BEZIER_KNOTS.);+#7693 = CARTESIAN_POINT('',(0.,-5.E-02));+#7694 = CARTESIAN_POINT('',(0.252092285156,-5.E-02));+#7695 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7696 = ORIENTED_EDGE('',*,*,#7697,.T.);+#7697 = EDGE_CURVE('',#7672,#7698,#7700,.T.);+#7698 = VERTEX_POINT('',#7699);+#7699 = CARTESIAN_POINT('',(0.795815139044,-0.102704264323,1.02));+#7700 = SURFACE_CURVE('',#7701,(#7705,#7711),.PCURVE_S1.);+#7701 = LINE('',#7702,#7703);+#7702 = CARTESIAN_POINT('',(-0.376627051944,-0.102704264323,1.02));+#7703 = VECTOR('',#7704,1.);+#7704 = DIRECTION('',(1.,0.,-0.));+#7705 = PCURVE('',#1723,#7706);+#7706 = DEFINITIONAL_REPRESENTATION('',(#7707),#7710);+#7707 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7708,#7709),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.113372948056,1.172442190988),.PIECEWISE_BEZIER_KNOTS.);+#7708 = CARTESIAN_POINT('',(1.592704264323,2.226745896112));+#7709 = CARTESIAN_POINT('',(1.592704264323,2.285815139044));+#7710 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7711 = PCURVE('',#7712,#7717);+#7712 = PLANE('',#7713);+#7713 = AXIS2_PLACEMENT_3D('',#7714,#7715,#7716);+#7714 = CARTESIAN_POINT('',(0.736745896112,-0.102704264323,1.07));+#7715 = DIRECTION('',(0.,-1.,0.));+#7716 = DIRECTION('',(1.,0.,0.));+#7717 = DEFINITIONAL_REPRESENTATION('',(#7718),#7721);+#7718 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7719,#7720),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.113372948056,1.172442190988),.PIECEWISE_BEZIER_KNOTS.);+#7719 = CARTESIAN_POINT('',(0.,-5.E-02));+#7720 = CARTESIAN_POINT('',(5.906924293155E-02,-5.E-02));+#7721 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7722 = ORIENTED_EDGE('',*,*,#7723,.T.);+#7723 = EDGE_CURVE('',#7698,#7462,#7724,.T.);+#7724 = SURFACE_CURVE('',#7725,(#7729,#7735),.PCURVE_S1.);+#7725 = LINE('',#7726,#7727);+#7726 = CARTESIAN_POINT('',(0.795815139044,0.693647867839,1.02));+#7727 = VECTOR('',#7728,1.);+#7728 = DIRECTION('',(0.,-1.,0.));+#7729 = PCURVE('',#1723,#7730);+#7730 = DEFINITIONAL_REPRESENTATION('',(#7731),#7734);+#7731 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7732,#7733),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.796352132161,0.828744942801),.PIECEWISE_BEZIER_KNOTS.);+#7732 = CARTESIAN_POINT('',(1.592704264323,2.285815139044));+#7733 = CARTESIAN_POINT('',(1.625097074963,2.285815139044));+#7734 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7735 = PCURVE('',#7736,#7741);+#7736 = PLANE('',#7737);+#7737 = AXIS2_PLACEMENT_3D('',#7738,#7739,#7740);+#7738 = CARTESIAN_POINT('',(0.795815139044,-0.102704264323,1.07));+#7739 = DIRECTION('',(-1.,0.,0.));+#7740 = DIRECTION('',(0.,-1.,0.));+#7741 = DEFINITIONAL_REPRESENTATION('',(#7742),#7745);+#7742 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7743,#7744),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.796352132161,0.828744942801),.PIECEWISE_BEZIER_KNOTS.);+#7743 = CARTESIAN_POINT('',(0.,-5.E-02));+#7744 = CARTESIAN_POINT('',(3.239281063988E-02,-5.E-02));+#7745 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7746 = ADVANCED_FACE('',(#7747),#1796,.T.);+#7747 = FACE_BOUND('',#7748,.T.);+#7748 = EDGE_LOOP('',(#7749,#7770,#7771,#7772));+#7749 = ORIENTED_EDGE('',*,*,#7750,.T.);+#7750 = EDGE_CURVE('',#3808,#3933,#7751,.T.);+#7751 = SURFACE_CURVE('',#7752,(#7756,#7763),.PCURVE_S1.);+#7752 = LINE('',#7753,#7754);+#7753 = CARTESIAN_POINT('',(1.5,-1.125,0.2));+#7754 = VECTOR('',#7755,1.);+#7755 = DIRECTION('',(3.445092848398E-16,1.,0.));+#7756 = PCURVE('',#1796,#7757);+#7757 = DEFINITIONAL_REPRESENTATION('',(#7758),#7762);+#7758 = LINE('',#7759,#7760);+#7759 = CARTESIAN_POINT('',(-0.125,-0.175160250101));+#7760 = VECTOR('',#7761,1.);+#7761 = DIRECTION('',(1.,0.));+#7762 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7763 = PCURVE('',#3844,#7764);+#7764 = DEFINITIONAL_REPRESENTATION('',(#7765),#7769);+#7765 = LINE('',#7766,#7767);+#7766 = CARTESIAN_POINT('',(0.,-0.2));+#7767 = VECTOR('',#7768,1.);+#7768 = DIRECTION('',(1.,0.));+#7769 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7770 = ORIENTED_EDGE('',*,*,#3955,.T.);+#7771 = ORIENTED_EDGE('',*,*,#1780,.T.);+#7772 = ORIENTED_EDGE('',*,*,#3807,.T.);+#7773 = ADVANCED_FACE('',(#7774),#1869,.T.);+#7774 = FACE_BOUND('',#7775,.T.);+#7775 = EDGE_LOOP('',(#7776,#7797,#7798,#7799));+#7776 = ORIENTED_EDGE('',*,*,#7777,.T.);+#7777 = EDGE_CURVE('',#4036,#4161,#7778,.T.);+#7778 = SURFACE_CURVE('',#7779,(#7783,#7790),.PCURVE_S1.);+#7779 = LINE('',#7780,#7781);+#7780 = CARTESIAN_POINT('',(1.5,-0.625,0.2));+#7781 = VECTOR('',#7782,1.);+#7782 = DIRECTION('',(3.445092848398E-16,1.,0.));+#7783 = PCURVE('',#1869,#7784);+#7784 = DEFINITIONAL_REPRESENTATION('',(#7785),#7789);+#7785 = LINE('',#7786,#7787);+#7786 = CARTESIAN_POINT('',(-0.125,-0.175160250101));+#7787 = VECTOR('',#7788,1.);+#7788 = DIRECTION('',(1.,0.));+#7789 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7790 = PCURVE('',#4072,#7791);+#7791 = DEFINITIONAL_REPRESENTATION('',(#7792),#7796);+#7792 = LINE('',#7793,#7794);+#7793 = CARTESIAN_POINT('',(0.,-0.2));+#7794 = VECTOR('',#7795,1.);+#7795 = DIRECTION('',(1.,0.));+#7796 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7797 = ORIENTED_EDGE('',*,*,#4183,.T.);+#7798 = ORIENTED_EDGE('',*,*,#1853,.T.);+#7799 = ORIENTED_EDGE('',*,*,#4035,.T.);+#7800 = ADVANCED_FACE('',(#7801),#1942,.T.);+#7801 = FACE_BOUND('',#7802,.T.);+#7802 = EDGE_LOOP('',(#7803,#7824,#7825,#7826));+#7803 = ORIENTED_EDGE('',*,*,#7804,.T.);+#7804 = EDGE_CURVE('',#4264,#4389,#7805,.T.);+#7805 = SURFACE_CURVE('',#7806,(#7810,#7817),.PCURVE_S1.);+#7806 = LINE('',#7807,#7808);+#7807 = CARTESIAN_POINT('',(1.5,-0.125,0.2));+#7808 = VECTOR('',#7809,1.);+#7809 = DIRECTION('',(3.445092848398E-16,1.,0.));+#7810 = PCURVE('',#1942,#7811);+#7811 = DEFINITIONAL_REPRESENTATION('',(#7812),#7816);+#7812 = LINE('',#7813,#7814);+#7813 = CARTESIAN_POINT('',(-0.125,-0.175160250101));+#7814 = VECTOR('',#7815,1.);+#7815 = DIRECTION('',(1.,0.));+#7816 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7817 = PCURVE('',#4300,#7818);+#7818 = DEFINITIONAL_REPRESENTATION('',(#7819),#7823);+#7819 = LINE('',#7820,#7821);+#7820 = CARTESIAN_POINT('',(0.,-0.2));+#7821 = VECTOR('',#7822,1.);+#7822 = DIRECTION('',(1.,0.));+#7823 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7824 = ORIENTED_EDGE('',*,*,#4411,.T.);+#7825 = ORIENTED_EDGE('',*,*,#1926,.T.);+#7826 = ORIENTED_EDGE('',*,*,#4263,.T.);+#7827 = ADVANCED_FACE('',(#7828),#2015,.T.);+#7828 = FACE_BOUND('',#7829,.T.);+#7829 = EDGE_LOOP('',(#7830,#7851,#7852,#7853));+#7830 = ORIENTED_EDGE('',*,*,#7831,.T.);+#7831 = EDGE_CURVE('',#4492,#4617,#7832,.T.);+#7832 = SURFACE_CURVE('',#7833,(#7837,#7844),.PCURVE_S1.);+#7833 = LINE('',#7834,#7835);+#7834 = CARTESIAN_POINT('',(1.5,0.375,0.2));+#7835 = VECTOR('',#7836,1.);+#7836 = DIRECTION('',(3.445092848398E-16,1.,0.));+#7837 = PCURVE('',#2015,#7838);+#7838 = DEFINITIONAL_REPRESENTATION('',(#7839),#7843);+#7839 = LINE('',#7840,#7841);+#7840 = CARTESIAN_POINT('',(-0.125,-0.175160250101));+#7841 = VECTOR('',#7842,1.);+#7842 = DIRECTION('',(1.,0.));+#7843 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7844 = PCURVE('',#4528,#7845);+#7845 = DEFINITIONAL_REPRESENTATION('',(#7846),#7850);+#7846 = LINE('',#7847,#7848);+#7847 = CARTESIAN_POINT('',(0.,-0.2));+#7848 = VECTOR('',#7849,1.);+#7849 = DIRECTION('',(1.,0.));+#7850 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7851 = ORIENTED_EDGE('',*,*,#4639,.T.);+#7852 = ORIENTED_EDGE('',*,*,#1999,.T.);+#7853 = ORIENTED_EDGE('',*,*,#4491,.T.);+#7854 = ADVANCED_FACE('',(#7855),#2088,.T.);+#7855 = FACE_BOUND('',#7856,.T.);+#7856 = EDGE_LOOP('',(#7857,#7878,#7879,#7880));+#7857 = ORIENTED_EDGE('',*,*,#7858,.T.);+#7858 = EDGE_CURVE('',#4720,#4845,#7859,.T.);+#7859 = SURFACE_CURVE('',#7860,(#7864,#7871),.PCURVE_S1.);+#7860 = LINE('',#7861,#7862);+#7861 = CARTESIAN_POINT('',(1.5,0.875,0.2));+#7862 = VECTOR('',#7863,1.);+#7863 = DIRECTION('',(3.445092848398E-16,1.,0.));+#7864 = PCURVE('',#2088,#7865);+#7865 = DEFINITIONAL_REPRESENTATION('',(#7866),#7870);+#7866 = LINE('',#7867,#7868);+#7867 = CARTESIAN_POINT('',(-0.125,-0.175160250101));+#7868 = VECTOR('',#7869,1.);+#7869 = DIRECTION('',(1.,0.));+#7870 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7871 = PCURVE('',#4756,#7872);+#7872 = DEFINITIONAL_REPRESENTATION('',(#7873),#7877);+#7873 = LINE('',#7874,#7875);+#7874 = CARTESIAN_POINT('',(0.,-0.2));+#7875 = VECTOR('',#7876,1.);+#7876 = DIRECTION('',(1.,0.));+#7877 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7878 = ORIENTED_EDGE('',*,*,#4867,.T.);+#7879 = ORIENTED_EDGE('',*,*,#2072,.T.);+#7880 = ORIENTED_EDGE('',*,*,#4719,.T.);+#7881 = ADVANCED_FACE('',(#7882),#2259,.T.);+#7882 = FACE_BOUND('',#7883,.T.);+#7883 = EDGE_LOOP('',(#7884,#7905,#7906,#7907));+#7884 = ORIENTED_EDGE('',*,*,#7885,.T.);+#7885 = EDGE_CURVE('',#3553,#3678,#7886,.T.);+#7886 = SURFACE_CURVE('',#7887,(#7891,#7898),.PCURVE_S1.);+#7887 = LINE('',#7888,#7889);+#7888 = CARTESIAN_POINT('',(-1.5,-0.875,0.2));+#7889 = VECTOR('',#7890,1.);+#7890 = DIRECTION('',(-4.669739647545E-16,-1.,0.));+#7891 = PCURVE('',#2259,#7892);+#7892 = DEFINITIONAL_REPRESENTATION('',(#7893),#7897);+#7893 = LINE('',#7894,#7895);+#7894 = CARTESIAN_POINT('',(-0.125,-0.175160250101));+#7895 = VECTOR('',#7896,1.);+#7896 = DIRECTION('',(1.,0.));+#7897 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7898 = PCURVE('',#3589,#7899);+#7899 = DEFINITIONAL_REPRESENTATION('',(#7900),#7904);+#7900 = LINE('',#7901,#7902);+#7901 = CARTESIAN_POINT('',(0.,-0.2));+#7902 = VECTOR('',#7903,1.);+#7903 = DIRECTION('',(1.,0.));+#7904 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7905 = ORIENTED_EDGE('',*,*,#3700,.T.);+#7906 = ORIENTED_EDGE('',*,*,#2243,.F.);+#7907 = ORIENTED_EDGE('',*,*,#3552,.T.);+#7908 = ADVANCED_FACE('',(#7909),#2332,.T.);+#7909 = FACE_BOUND('',#7910,.T.);+#7910 = EDGE_LOOP('',(#7911,#7932,#7933,#7934));+#7911 = ORIENTED_EDGE('',*,*,#7912,.T.);+#7912 = EDGE_CURVE('',#3325,#3450,#7913,.T.);+#7913 = SURFACE_CURVE('',#7914,(#7918,#7925),.PCURVE_S1.);+#7914 = LINE('',#7915,#7916);+#7915 = CARTESIAN_POINT('',(-1.5,-0.375,0.2));+#7916 = VECTOR('',#7917,1.);+#7917 = DIRECTION('',(-4.669739647545E-16,-1.,0.));+#7918 = PCURVE('',#2332,#7919);+#7919 = DEFINITIONAL_REPRESENTATION('',(#7920),#7924);+#7920 = LINE('',#7921,#7922);+#7921 = CARTESIAN_POINT('',(-0.125,-0.175160250101));+#7922 = VECTOR('',#7923,1.);+#7923 = DIRECTION('',(1.,0.));+#7924 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7925 = PCURVE('',#3361,#7926);+#7926 = DEFINITIONAL_REPRESENTATION('',(#7927),#7931);+#7927 = LINE('',#7928,#7929);+#7928 = CARTESIAN_POINT('',(0.,-0.2));+#7929 = VECTOR('',#7930,1.);+#7930 = DIRECTION('',(1.,0.));+#7931 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7932 = ORIENTED_EDGE('',*,*,#3472,.T.);+#7933 = ORIENTED_EDGE('',*,*,#2316,.F.);+#7934 = ORIENTED_EDGE('',*,*,#3324,.T.);+#7935 = ADVANCED_FACE('',(#7936),#2405,.T.);+#7936 = FACE_BOUND('',#7937,.T.);+#7937 = EDGE_LOOP('',(#7938,#7959,#7960,#7961));+#7938 = ORIENTED_EDGE('',*,*,#7939,.T.);+#7939 = EDGE_CURVE('',#3097,#3222,#7940,.T.);+#7940 = SURFACE_CURVE('',#7941,(#7945,#7952),.PCURVE_S1.);+#7941 = LINE('',#7942,#7943);+#7942 = CARTESIAN_POINT('',(-1.5,0.125,0.2));+#7943 = VECTOR('',#7944,1.);+#7944 = DIRECTION('',(-4.669739647545E-16,-1.,0.));+#7945 = PCURVE('',#2405,#7946);+#7946 = DEFINITIONAL_REPRESENTATION('',(#7947),#7951);+#7947 = LINE('',#7948,#7949);+#7948 = CARTESIAN_POINT('',(-0.125,-0.175160250101));+#7949 = VECTOR('',#7950,1.);+#7950 = DIRECTION('',(1.,0.));+#7951 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7952 = PCURVE('',#3133,#7953);+#7953 = DEFINITIONAL_REPRESENTATION('',(#7954),#7958);+#7954 = LINE('',#7955,#7956);+#7955 = CARTESIAN_POINT('',(0.,-0.2));+#7956 = VECTOR('',#7957,1.);+#7957 = DIRECTION('',(1.,0.));+#7958 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7959 = ORIENTED_EDGE('',*,*,#3244,.T.);+#7960 = ORIENTED_EDGE('',*,*,#2389,.F.);+#7961 = ORIENTED_EDGE('',*,*,#3096,.T.);+#7962 = ADVANCED_FACE('',(#7963),#2478,.T.);+#7963 = FACE_BOUND('',#7964,.T.);+#7964 = EDGE_LOOP('',(#7965,#7986,#7987,#7988));+#7965 = ORIENTED_EDGE('',*,*,#7966,.T.);+#7966 = EDGE_CURVE('',#2869,#2994,#7967,.T.);+#7967 = SURFACE_CURVE('',#7968,(#7972,#7979),.PCURVE_S1.);+#7968 = LINE('',#7969,#7970);+#7969 = CARTESIAN_POINT('',(-1.5,0.625,0.2));+#7970 = VECTOR('',#7971,1.);+#7971 = DIRECTION('',(-4.669739647545E-16,-1.,0.));+#7972 = PCURVE('',#2478,#7973);+#7973 = DEFINITIONAL_REPRESENTATION('',(#7974),#7978);+#7974 = LINE('',#7975,#7976);+#7975 = CARTESIAN_POINT('',(-0.125,-0.175160250101));+#7976 = VECTOR('',#7977,1.);+#7977 = DIRECTION('',(1.,0.));+#7978 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7979 = PCURVE('',#2905,#7980);+#7980 = DEFINITIONAL_REPRESENTATION('',(#7981),#7985);+#7981 = LINE('',#7982,#7983);+#7982 = CARTESIAN_POINT('',(0.,-0.2));+#7983 = VECTOR('',#7984,1.);+#7984 = DIRECTION('',(1.,0.));+#7985 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7986 = ORIENTED_EDGE('',*,*,#3016,.T.);+#7987 = ORIENTED_EDGE('',*,*,#2462,.F.);+#7988 = ORIENTED_EDGE('',*,*,#2868,.T.);+#7989 = ADVANCED_FACE('',(#7990),#2551,.T.);+#7990 = FACE_BOUND('',#7991,.T.);+#7991 = EDGE_LOOP('',(#7992,#8013,#8014,#8015));+#7992 = ORIENTED_EDGE('',*,*,#7993,.T.);+#7993 = EDGE_CURVE('',#2641,#2766,#7994,.T.);+#7994 = SURFACE_CURVE('',#7995,(#7999,#8006),.PCURVE_S1.);+#7995 = LINE('',#7996,#7997);+#7996 = CARTESIAN_POINT('',(-1.5,1.125,0.2));+#7997 = VECTOR('',#7998,1.);+#7998 = DIRECTION('',(-4.669739647545E-16,-1.,0.));+#7999 = PCURVE('',#2551,#8000);+#8000 = DEFINITIONAL_REPRESENTATION('',(#8001),#8005);+#8001 = LINE('',#8002,#8003);+#8002 = CARTESIAN_POINT('',(-0.125,-0.175160250101));+#8003 = VECTOR('',#8004,1.);+#8004 = DIRECTION('',(1.,0.));+#8005 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8006 = PCURVE('',#2677,#8007);+#8007 = DEFINITIONAL_REPRESENTATION('',(#8008),#8012);+#8008 = LINE('',#8009,#8010);+#8009 = CARTESIAN_POINT('',(0.,-0.2));+#8010 = VECTOR('',#8011,1.);+#8011 = DIRECTION('',(1.,0.));+#8012 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8013 = ORIENTED_EDGE('',*,*,#2788,.T.);+#8014 = ORIENTED_EDGE('',*,*,#2535,.F.);+#8015 = ORIENTED_EDGE('',*,*,#2640,.T.);+#8016 = ADVANCED_FACE('',(#8017),#2605,.F.);+#8017 = FACE_BOUND('',#8018,.F.);+#8018 = EDGE_LOOP('',(#8019,#8020,#8021,#8022));+#8019 = ORIENTED_EDGE('',*,*,#2742,.T.);+#8020 = ORIENTED_EDGE('',*,*,#2717,.T.);+#8021 = ORIENTED_EDGE('',*,*,#2587,.T.);+#8022 = ORIENTED_EDGE('',*,*,#8023,.T.);+#8023 = EDGE_CURVE('',#2590,#2743,#8024,.T.);+#8024 = SURFACE_CURVE('',#8025,(#8029,#8036),.PCURVE_S1.);+#8025 = LINE('',#8026,#8027);+#8026 = CARTESIAN_POINT('',(-1.5,1.125,0.));+#8027 = VECTOR('',#8028,1.);+#8028 = DIRECTION('',(-4.669739647545E-16,-1.,0.));+#8029 = PCURVE('',#2605,#8030);+#8030 = DEFINITIONAL_REPRESENTATION('',(#8031),#8035);+#8031 = LINE('',#8032,#8033);+#8032 = CARTESIAN_POINT('',(-0.125,-0.175160250101));+#8033 = VECTOR('',#8034,1.);+#8034 = DIRECTION('',(1.,0.));+#8035 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8036 = PCURVE('',#2677,#8037);+#8037 = DEFINITIONAL_REPRESENTATION('',(#8038),#8042);+#8038 = LINE('',#8039,#8040);+#8039 = CARTESIAN_POINT('',(0.,0.));+#8040 = VECTOR('',#8041,1.);+#8041 = DIRECTION('',(1.,0.));+#8042 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8043 = ADVANCED_FACE('',(#8044),#2677,.F.);+#8044 = FACE_BOUND('',#8045,.F.);+#8045 = EDGE_LOOP('',(#8046,#8047,#8048,#8049));+#8046 = ORIENTED_EDGE('',*,*,#2663,.T.);+#8047 = ORIENTED_EDGE('',*,*,#7993,.T.);+#8048 = ORIENTED_EDGE('',*,*,#2765,.F.);+#8049 = ORIENTED_EDGE('',*,*,#8023,.F.);+#8050 = ADVANCED_FACE('',(#8051),#2833,.F.);+#8051 = FACE_BOUND('',#8052,.F.);+#8052 = EDGE_LOOP('',(#8053,#8054,#8055,#8056));+#8053 = ORIENTED_EDGE('',*,*,#2970,.T.);+#8054 = ORIENTED_EDGE('',*,*,#2945,.T.);+#8055 = ORIENTED_EDGE('',*,*,#2815,.T.);+#8056 = ORIENTED_EDGE('',*,*,#8057,.T.);+#8057 = EDGE_CURVE('',#2818,#2971,#8058,.T.);+#8058 = SURFACE_CURVE('',#8059,(#8063,#8070),.PCURVE_S1.);+#8059 = LINE('',#8060,#8061);+#8060 = CARTESIAN_POINT('',(-1.5,0.625,0.));+#8061 = VECTOR('',#8062,1.);+#8062 = DIRECTION('',(-4.669739647545E-16,-1.,0.));+#8063 = PCURVE('',#2833,#8064);+#8064 = DEFINITIONAL_REPRESENTATION('',(#8065),#8069);+#8065 = LINE('',#8066,#8067);+#8066 = CARTESIAN_POINT('',(-0.125,-0.175160250101));+#8067 = VECTOR('',#8068,1.);+#8068 = DIRECTION('',(1.,0.));+#8069 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8070 = PCURVE('',#2905,#8071);+#8071 = DEFINITIONAL_REPRESENTATION('',(#8072),#8076);+#8072 = LINE('',#8073,#8074);+#8073 = CARTESIAN_POINT('',(0.,0.));+#8074 = VECTOR('',#8075,1.);+#8075 = DIRECTION('',(1.,0.));+#8076 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8077 = ADVANCED_FACE('',(#8078),#2905,.F.);+#8078 = FACE_BOUND('',#8079,.F.);+#8079 = EDGE_LOOP('',(#8080,#8081,#8082,#8083));+#8080 = ORIENTED_EDGE('',*,*,#2891,.T.);+#8081 = ORIENTED_EDGE('',*,*,#7966,.T.);+#8082 = ORIENTED_EDGE('',*,*,#2993,.F.);+#8083 = ORIENTED_EDGE('',*,*,#8057,.F.);+#8084 = ADVANCED_FACE('',(#8085),#3061,.F.);+#8085 = FACE_BOUND('',#8086,.F.);+#8086 = EDGE_LOOP('',(#8087,#8088,#8089,#8090));+#8087 = ORIENTED_EDGE('',*,*,#3198,.T.);+#8088 = ORIENTED_EDGE('',*,*,#3173,.T.);+#8089 = ORIENTED_EDGE('',*,*,#3043,.T.);+#8090 = ORIENTED_EDGE('',*,*,#8091,.T.);+#8091 = EDGE_CURVE('',#3046,#3199,#8092,.T.);+#8092 = SURFACE_CURVE('',#8093,(#8097,#8104),.PCURVE_S1.);+#8093 = LINE('',#8094,#8095);+#8094 = CARTESIAN_POINT('',(-1.5,0.125,0.));+#8095 = VECTOR('',#8096,1.);+#8096 = DIRECTION('',(-4.669739647545E-16,-1.,0.));+#8097 = PCURVE('',#3061,#8098);+#8098 = DEFINITIONAL_REPRESENTATION('',(#8099),#8103);+#8099 = LINE('',#8100,#8101);+#8100 = CARTESIAN_POINT('',(-0.125,-0.175160250101));+#8101 = VECTOR('',#8102,1.);+#8102 = DIRECTION('',(1.,0.));+#8103 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8104 = PCURVE('',#3133,#8105);+#8105 = DEFINITIONAL_REPRESENTATION('',(#8106),#8110);+#8106 = LINE('',#8107,#8108);+#8107 = CARTESIAN_POINT('',(0.,0.));+#8108 = VECTOR('',#8109,1.);+#8109 = DIRECTION('',(1.,0.));+#8110 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8111 = ADVANCED_FACE('',(#8112),#3133,.F.);+#8112 = FACE_BOUND('',#8113,.F.);+#8113 = EDGE_LOOP('',(#8114,#8115,#8116,#8117));+#8114 = ORIENTED_EDGE('',*,*,#3119,.T.);+#8115 = ORIENTED_EDGE('',*,*,#7939,.T.);+#8116 = ORIENTED_EDGE('',*,*,#3221,.F.);+#8117 = ORIENTED_EDGE('',*,*,#8091,.F.);+#8118 = ADVANCED_FACE('',(#8119),#3289,.F.);+#8119 = FACE_BOUND('',#8120,.F.);+#8120 = EDGE_LOOP('',(#8121,#8122,#8123,#8124));+#8121 = ORIENTED_EDGE('',*,*,#3426,.T.);+#8122 = ORIENTED_EDGE('',*,*,#3401,.T.);+#8123 = ORIENTED_EDGE('',*,*,#3271,.T.);+#8124 = ORIENTED_EDGE('',*,*,#8125,.T.);+#8125 = EDGE_CURVE('',#3274,#3427,#8126,.T.);+#8126 = SURFACE_CURVE('',#8127,(#8131,#8138),.PCURVE_S1.);+#8127 = LINE('',#8128,#8129);+#8128 = CARTESIAN_POINT('',(-1.5,-0.375,0.));+#8129 = VECTOR('',#8130,1.);+#8130 = DIRECTION('',(-4.669739647545E-16,-1.,0.));+#8131 = PCURVE('',#3289,#8132);+#8132 = DEFINITIONAL_REPRESENTATION('',(#8133),#8137);+#8133 = LINE('',#8134,#8135);+#8134 = CARTESIAN_POINT('',(-0.125,-0.175160250101));+#8135 = VECTOR('',#8136,1.);+#8136 = DIRECTION('',(1.,0.));+#8137 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8138 = PCURVE('',#3361,#8139);+#8139 = DEFINITIONAL_REPRESENTATION('',(#8140),#8144);+#8140 = LINE('',#8141,#8142);+#8141 = CARTESIAN_POINT('',(0.,0.));+#8142 = VECTOR('',#8143,1.);+#8143 = DIRECTION('',(1.,0.));+#8144 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8145 = ADVANCED_FACE('',(#8146),#3361,.F.);+#8146 = FACE_BOUND('',#8147,.F.);+#8147 = EDGE_LOOP('',(#8148,#8149,#8150,#8151));+#8148 = ORIENTED_EDGE('',*,*,#3347,.T.);+#8149 = ORIENTED_EDGE('',*,*,#7912,.T.);+#8150 = ORIENTED_EDGE('',*,*,#3449,.F.);+#8151 = ORIENTED_EDGE('',*,*,#8125,.F.);+#8152 = ADVANCED_FACE('',(#8153),#3517,.F.);+#8153 = FACE_BOUND('',#8154,.F.);+#8154 = EDGE_LOOP('',(#8155,#8156,#8157,#8158));+#8155 = ORIENTED_EDGE('',*,*,#3654,.T.);+#8156 = ORIENTED_EDGE('',*,*,#3629,.T.);+#8157 = ORIENTED_EDGE('',*,*,#3499,.T.);+#8158 = ORIENTED_EDGE('',*,*,#8159,.T.);+#8159 = EDGE_CURVE('',#3502,#3655,#8160,.T.);+#8160 = SURFACE_CURVE('',#8161,(#8165,#8172),.PCURVE_S1.);+#8161 = LINE('',#8162,#8163);+#8162 = CARTESIAN_POINT('',(-1.5,-0.875,0.));+#8163 = VECTOR('',#8164,1.);+#8164 = DIRECTION('',(-4.669739647545E-16,-1.,0.));+#8165 = PCURVE('',#3517,#8166);+#8166 = DEFINITIONAL_REPRESENTATION('',(#8167),#8171);+#8167 = LINE('',#8168,#8169);+#8168 = CARTESIAN_POINT('',(-0.125,-0.175160250101));+#8169 = VECTOR('',#8170,1.);+#8170 = DIRECTION('',(1.,0.));+#8171 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8172 = PCURVE('',#3589,#8173);+#8173 = DEFINITIONAL_REPRESENTATION('',(#8174),#8178);+#8174 = LINE('',#8175,#8176);+#8175 = CARTESIAN_POINT('',(0.,0.));+#8176 = VECTOR('',#8177,1.);+#8177 = DIRECTION('',(1.,0.));+#8178 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8179 = ADVANCED_FACE('',(#8180),#3589,.F.);+#8180 = FACE_BOUND('',#8181,.F.);+#8181 = EDGE_LOOP('',(#8182,#8183,#8184,#8185));+#8182 = ORIENTED_EDGE('',*,*,#3575,.T.);+#8183 = ORIENTED_EDGE('',*,*,#7885,.T.);+#8184 = ORIENTED_EDGE('',*,*,#3677,.F.);+#8185 = ORIENTED_EDGE('',*,*,#8159,.F.);+#8186 = ADVANCED_FACE('',(#8187),#3772,.F.);+#8187 = FACE_BOUND('',#8188,.F.);+#8188 = EDGE_LOOP('',(#8189,#8190,#8191,#8192));+#8189 = ORIENTED_EDGE('',*,*,#3909,.T.);+#8190 = ORIENTED_EDGE('',*,*,#3884,.T.);+#8191 = ORIENTED_EDGE('',*,*,#3754,.T.);+#8192 = ORIENTED_EDGE('',*,*,#8193,.T.);+#8193 = EDGE_CURVE('',#3757,#3910,#8194,.T.);+#8194 = SURFACE_CURVE('',#8195,(#8199,#8206),.PCURVE_S1.);+#8195 = LINE('',#8196,#8197);+#8196 = CARTESIAN_POINT('',(1.5,-1.125,0.));+#8197 = VECTOR('',#8198,1.);+#8198 = DIRECTION('',(3.445092848398E-16,1.,0.));+#8199 = PCURVE('',#3772,#8200);+#8200 = DEFINITIONAL_REPRESENTATION('',(#8201),#8205);+#8201 = LINE('',#8202,#8203);+#8202 = CARTESIAN_POINT('',(-0.125,-0.175160250101));+#8203 = VECTOR('',#8204,1.);+#8204 = DIRECTION('',(1.,0.));+#8205 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8206 = PCURVE('',#3844,#8207);+#8207 = DEFINITIONAL_REPRESENTATION('',(#8208),#8212);+#8208 = LINE('',#8209,#8210);+#8209 = CARTESIAN_POINT('',(0.,0.));+#8210 = VECTOR('',#8211,1.);+#8211 = DIRECTION('',(1.,0.));+#8212 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8213 = ADVANCED_FACE('',(#8214),#3844,.F.);+#8214 = FACE_BOUND('',#8215,.F.);+#8215 = EDGE_LOOP('',(#8216,#8217,#8218,#8219));+#8216 = ORIENTED_EDGE('',*,*,#3830,.T.);+#8217 = ORIENTED_EDGE('',*,*,#7750,.T.);+#8218 = ORIENTED_EDGE('',*,*,#3932,.F.);+#8219 = ORIENTED_EDGE('',*,*,#8193,.F.);+#8220 = ADVANCED_FACE('',(#8221),#4000,.F.);+#8221 = FACE_BOUND('',#8222,.F.);+#8222 = EDGE_LOOP('',(#8223,#8224,#8225,#8226));+#8223 = ORIENTED_EDGE('',*,*,#4137,.T.);+#8224 = ORIENTED_EDGE('',*,*,#4112,.T.);+#8225 = ORIENTED_EDGE('',*,*,#3982,.T.);+#8226 = ORIENTED_EDGE('',*,*,#8227,.T.);+#8227 = EDGE_CURVE('',#3985,#4138,#8228,.T.);+#8228 = SURFACE_CURVE('',#8229,(#8233,#8240),.PCURVE_S1.);+#8229 = LINE('',#8230,#8231);+#8230 = CARTESIAN_POINT('',(1.5,-0.625,0.));+#8231 = VECTOR('',#8232,1.);+#8232 = DIRECTION('',(3.445092848398E-16,1.,0.));+#8233 = PCURVE('',#4000,#8234);+#8234 = DEFINITIONAL_REPRESENTATION('',(#8235),#8239);+#8235 = LINE('',#8236,#8237);+#8236 = CARTESIAN_POINT('',(-0.125,-0.175160250101));+#8237 = VECTOR('',#8238,1.);+#8238 = DIRECTION('',(1.,0.));+#8239 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8240 = PCURVE('',#4072,#8241);+#8241 = DEFINITIONAL_REPRESENTATION('',(#8242),#8246);+#8242 = LINE('',#8243,#8244);+#8243 = CARTESIAN_POINT('',(0.,0.));+#8244 = VECTOR('',#8245,1.);+#8245 = DIRECTION('',(1.,0.));+#8246 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8247 = ADVANCED_FACE('',(#8248),#4072,.F.);+#8248 = FACE_BOUND('',#8249,.F.);+#8249 = EDGE_LOOP('',(#8250,#8251,#8252,#8253));+#8250 = ORIENTED_EDGE('',*,*,#4058,.T.);+#8251 = ORIENTED_EDGE('',*,*,#7777,.T.);+#8252 = ORIENTED_EDGE('',*,*,#4160,.F.);+#8253 = ORIENTED_EDGE('',*,*,#8227,.F.);+#8254 = ADVANCED_FACE('',(#8255),#4228,.F.);+#8255 = FACE_BOUND('',#8256,.F.);+#8256 = EDGE_LOOP('',(#8257,#8258,#8259,#8260));+#8257 = ORIENTED_EDGE('',*,*,#4365,.T.);+#8258 = ORIENTED_EDGE('',*,*,#4340,.T.);+#8259 = ORIENTED_EDGE('',*,*,#4210,.T.);+#8260 = ORIENTED_EDGE('',*,*,#8261,.T.);+#8261 = EDGE_CURVE('',#4213,#4366,#8262,.T.);+#8262 = SURFACE_CURVE('',#8263,(#8267,#8274),.PCURVE_S1.);+#8263 = LINE('',#8264,#8265);+#8264 = CARTESIAN_POINT('',(1.5,-0.125,0.));+#8265 = VECTOR('',#8266,1.);+#8266 = DIRECTION('',(3.445092848398E-16,1.,0.));+#8267 = PCURVE('',#4228,#8268);+#8268 = DEFINITIONAL_REPRESENTATION('',(#8269),#8273);+#8269 = LINE('',#8270,#8271);+#8270 = CARTESIAN_POINT('',(-0.125,-0.175160250101));+#8271 = VECTOR('',#8272,1.);+#8272 = DIRECTION('',(1.,0.));+#8273 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8274 = PCURVE('',#4300,#8275);+#8275 = DEFINITIONAL_REPRESENTATION('',(#8276),#8280);+#8276 = LINE('',#8277,#8278);+#8277 = CARTESIAN_POINT('',(0.,0.));+#8278 = VECTOR('',#8279,1.);+#8279 = DIRECTION('',(1.,0.));+#8280 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8281 = ADVANCED_FACE('',(#8282),#4300,.F.);+#8282 = FACE_BOUND('',#8283,.F.);+#8283 = EDGE_LOOP('',(#8284,#8285,#8286,#8287));+#8284 = ORIENTED_EDGE('',*,*,#4286,.T.);+#8285 = ORIENTED_EDGE('',*,*,#7804,.T.);+#8286 = ORIENTED_EDGE('',*,*,#4388,.F.);+#8287 = ORIENTED_EDGE('',*,*,#8261,.F.);+#8288 = ADVANCED_FACE('',(#8289),#4456,.F.);+#8289 = FACE_BOUND('',#8290,.F.);+#8290 = EDGE_LOOP('',(#8291,#8292,#8293,#8294));+#8291 = ORIENTED_EDGE('',*,*,#4593,.T.);+#8292 = ORIENTED_EDGE('',*,*,#4568,.T.);+#8293 = ORIENTED_EDGE('',*,*,#4438,.T.);+#8294 = ORIENTED_EDGE('',*,*,#8295,.T.);+#8295 = EDGE_CURVE('',#4441,#4594,#8296,.T.);+#8296 = SURFACE_CURVE('',#8297,(#8301,#8308),.PCURVE_S1.);+#8297 = LINE('',#8298,#8299);+#8298 = CARTESIAN_POINT('',(1.5,0.375,0.));+#8299 = VECTOR('',#8300,1.);+#8300 = DIRECTION('',(3.445092848398E-16,1.,0.));+#8301 = PCURVE('',#4456,#8302);+#8302 = DEFINITIONAL_REPRESENTATION('',(#8303),#8307);+#8303 = LINE('',#8304,#8305);+#8304 = CARTESIAN_POINT('',(-0.125,-0.175160250101));+#8305 = VECTOR('',#8306,1.);+#8306 = DIRECTION('',(1.,0.));+#8307 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8308 = PCURVE('',#4528,#8309);+#8309 = DEFINITIONAL_REPRESENTATION('',(#8310),#8314);+#8310 = LINE('',#8311,#8312);+#8311 = CARTESIAN_POINT('',(0.,0.));+#8312 = VECTOR('',#8313,1.);+#8313 = DIRECTION('',(1.,0.));+#8314 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8315 = ADVANCED_FACE('',(#8316),#4528,.F.);+#8316 = FACE_BOUND('',#8317,.F.);+#8317 = EDGE_LOOP('',(#8318,#8319,#8320,#8321));+#8318 = ORIENTED_EDGE('',*,*,#4514,.T.);+#8319 = ORIENTED_EDGE('',*,*,#7831,.T.);+#8320 = ORIENTED_EDGE('',*,*,#4616,.F.);+#8321 = ORIENTED_EDGE('',*,*,#8295,.F.);+#8322 = ADVANCED_FACE('',(#8323),#4684,.F.);+#8323 = FACE_BOUND('',#8324,.F.);+#8324 = EDGE_LOOP('',(#8325,#8326,#8327,#8328));+#8325 = ORIENTED_EDGE('',*,*,#4821,.T.);+#8326 = ORIENTED_EDGE('',*,*,#4796,.T.);+#8327 = ORIENTED_EDGE('',*,*,#4666,.T.);+#8328 = ORIENTED_EDGE('',*,*,#8329,.T.);+#8329 = EDGE_CURVE('',#4669,#4822,#8330,.T.);+#8330 = SURFACE_CURVE('',#8331,(#8335,#8342),.PCURVE_S1.);+#8331 = LINE('',#8332,#8333);+#8332 = CARTESIAN_POINT('',(1.5,0.875,0.));+#8333 = VECTOR('',#8334,1.);+#8334 = DIRECTION('',(3.445092848398E-16,1.,0.));+#8335 = PCURVE('',#4684,#8336);+#8336 = DEFINITIONAL_REPRESENTATION('',(#8337),#8341);+#8337 = LINE('',#8338,#8339);+#8338 = CARTESIAN_POINT('',(-0.125,-0.175160250101));+#8339 = VECTOR('',#8340,1.);+#8340 = DIRECTION('',(1.,0.));+#8341 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8342 = PCURVE('',#4756,#8343);+#8343 = DEFINITIONAL_REPRESENTATION('',(#8344),#8348);+#8344 = LINE('',#8345,#8346);+#8345 = CARTESIAN_POINT('',(0.,0.));+#8346 = VECTOR('',#8347,1.);+#8347 = DIRECTION('',(1.,0.));+#8348 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8349 = ADVANCED_FACE('',(#8350),#4756,.F.);+#8350 = FACE_BOUND('',#8351,.F.);+#8351 = EDGE_LOOP('',(#8352,#8353,#8354,#8355));+#8352 = ORIENTED_EDGE('',*,*,#4742,.T.);+#8353 = ORIENTED_EDGE('',*,*,#7858,.T.);+#8354 = ORIENTED_EDGE('',*,*,#4844,.F.);+#8355 = ORIENTED_EDGE('',*,*,#8329,.F.);+#8356 = ADVANCED_FACE('',(#8357),#4921,.F.);+#8357 = FACE_BOUND('',#8358,.F.);+#8358 = EDGE_LOOP('',(#8359,#8382,#8409,#8410));+#8359 = ORIENTED_EDGE('',*,*,#8360,.T.);+#8360 = EDGE_CURVE('',#4901,#8361,#8363,.T.);+#8361 = VERTEX_POINT('',#8362);+#8362 = CARTESIAN_POINT('',(-1.05,0.875,1.));+#8363 = SEAM_CURVE('',#8364,(#8368,#8375),.PCURVE_S1.);+#8364 = LINE('',#8365,#8366);+#8365 = CARTESIAN_POINT('',(-1.05,0.875,1.04));+#8366 = VECTOR('',#8367,1.);+#8367 = DIRECTION('',(-0.,0.,-1.));+#8368 = PCURVE('',#4921,#8369);+#8369 = DEFINITIONAL_REPRESENTATION('',(#8370),#8374);+#8370 = LINE('',#8371,#8372);+#8371 = CARTESIAN_POINT('',(6.28318530718,0.));+#8372 = VECTOR('',#8373,1.);+#8373 = DIRECTION('',(-0.,1.));+#8374 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8375 = PCURVE('',#4921,#8376);+#8376 = DEFINITIONAL_REPRESENTATION('',(#8377),#8381);+#8377 = LINE('',#8378,#8379);+#8378 = CARTESIAN_POINT('',(-4.138911435803E-13,0.));+#8379 = VECTOR('',#8380,1.);+#8380 = DIRECTION('',(-0.,1.));+#8381 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8382 = ORIENTED_EDGE('',*,*,#8383,.T.);+#8383 = EDGE_CURVE('',#8361,#8361,#8384,.T.);+#8384 = SURFACE_CURVE('',#8385,(#8390,#8397),.PCURVE_S1.);+#8385 = CIRCLE('',#8386,0.175);+#8386 = AXIS2_PLACEMENT_3D('',#8387,#8388,#8389);+#8387 = CARTESIAN_POINT('',(-1.05,1.05,1.));+#8388 = DIRECTION('',(0.,0.,1.));+#8389 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#8390 = PCURVE('',#4921,#8391);+#8391 = DEFINITIONAL_REPRESENTATION('',(#8392),#8396);+#8392 = LINE('',#8393,#8394);+#8393 = CARTESIAN_POINT('',(6.28318530718,4.E-02));+#8394 = VECTOR('',#8395,1.);+#8395 = DIRECTION('',(-1.,0.));+#8396 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8397 = PCURVE('',#8398,#8403);+#8398 = PLANE('',#8399);+#8399 = AXIS2_PLACEMENT_3D('',#8400,#8401,#8402);+#8400 = CARTESIAN_POINT('',(-1.05,1.05,1.));+#8401 = DIRECTION('',(0.,0.,1.));+#8402 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#8403 = DEFINITIONAL_REPRESENTATION('',(#8404),#8408);+#8404 = CIRCLE('',#8405,0.175);+#8405 = AXIS2_PLACEMENT_2D('',#8406,#8407);+#8406 = CARTESIAN_POINT('',(0.,0.));+#8407 = DIRECTION('',(1.,0.));+#8408 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8409 = ORIENTED_EDGE('',*,*,#8360,.F.);+#8410 = ORIENTED_EDGE('',*,*,#4900,.T.);+#8411 = ADVANCED_FACE('',(#8412),#4952,.T.);+#8412 = FACE_BOUND('',#8413,.T.);+#8413 = EDGE_LOOP('',(#8414,#8415,#8438,#8466));+#8414 = ORIENTED_EDGE('',*,*,#4935,.F.);+#8415 = ORIENTED_EDGE('',*,*,#8416,.T.);+#8416 = EDGE_CURVE('',#4936,#8417,#8419,.T.);+#8417 = VERTEX_POINT('',#8418);+#8418 = CARTESIAN_POINT('',(-0.723979317801,0.116995210193,0.97));+#8419 = SURFACE_CURVE('',#8420,(#8424,#8431),.PCURVE_S1.);+#8420 = LINE('',#8421,#8422);+#8421 = CARTESIAN_POINT('',(-0.723979317801,0.116995210193,1.07));+#8422 = VECTOR('',#8423,1.);+#8423 = DIRECTION('',(-0.,-0.,-1.));+#8424 = PCURVE('',#4952,#8425);+#8425 = DEFINITIONAL_REPRESENTATION('',(#8426),#8430);+#8426 = LINE('',#8427,#8428);+#8427 = CARTESIAN_POINT('',(0.,0.));+#8428 = VECTOR('',#8429,1.);+#8429 = DIRECTION('',(0.,-1.));+#8430 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8431 = PCURVE('',#5132,#8432);+#8432 = DEFINITIONAL_REPRESENTATION('',(#8433),#8437);+#8433 = LINE('',#8434,#8435);+#8434 = CARTESIAN_POINT('',(0.252092285156,0.));+#8435 = VECTOR('',#8436,1.);+#8436 = DIRECTION('',(0.,-1.));+#8437 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8438 = ORIENTED_EDGE('',*,*,#8439,.T.);+#8439 = EDGE_CURVE('',#8417,#8440,#8442,.T.);+#8440 = VERTEX_POINT('',#8441);+#8441 = CARTESIAN_POINT('',(-0.813345365978,0.116995210193,0.97));+#8442 = SURFACE_CURVE('',#8443,(#8447,#8454),.PCURVE_S1.);+#8443 = LINE('',#8444,#8445);+#8444 = CARTESIAN_POINT('',(-0.723979317801,0.116995210193,0.97));+#8445 = VECTOR('',#8446,1.);+#8446 = DIRECTION('',(-1.,0.,0.));+#8447 = PCURVE('',#4952,#8448);+#8448 = DEFINITIONAL_REPRESENTATION('',(#8449),#8453);+#8449 = LINE('',#8450,#8451);+#8450 = CARTESIAN_POINT('',(0.,-0.1));+#8451 = VECTOR('',#8452,1.);+#8452 = DIRECTION('',(1.,0.));+#8453 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8454 = PCURVE('',#8455,#8460);+#8455 = PLANE('',#8456);+#8456 = AXIS2_PLACEMENT_3D('',#8457,#8458,#8459);+#8457 = CARTESIAN_POINT('',(-0.822301025391,-0.135097074963,0.97));+#8458 = DIRECTION('',(0.,0.,1.));+#8459 = DIRECTION('',(1.,0.,0.));+#8460 = DEFINITIONAL_REPRESENTATION('',(#8461),#8465);+#8461 = LINE('',#8462,#8463);+#8462 = CARTESIAN_POINT('',(9.832170758929E-02,0.252092285156));+#8463 = VECTOR('',#8464,1.);+#8464 = DIRECTION('',(-1.,0.));+#8465 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8466 = ORIENTED_EDGE('',*,*,#8467,.F.);+#8467 = EDGE_CURVE('',#4938,#8440,#8468,.T.);+#8468 = SURFACE_CURVE('',#8469,(#8473,#8480),.PCURVE_S1.);+#8469 = LINE('',#8470,#8471);+#8470 = CARTESIAN_POINT('',(-0.813345365978,0.116995210193,1.07));+#8471 = VECTOR('',#8472,1.);+#8472 = DIRECTION('',(-0.,-0.,-1.));+#8473 = PCURVE('',#4952,#8474);+#8474 = DEFINITIONAL_REPRESENTATION('',(#8475),#8479);+#8475 = LINE('',#8476,#8477);+#8476 = CARTESIAN_POINT('',(8.936604817708E-02,0.));+#8477 = VECTOR('',#8478,1.);+#8478 = DIRECTION('',(0.,-1.));+#8479 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8480 = PCURVE('',#4978,#8481);+#8481 = DEFINITIONAL_REPRESENTATION('',(#8482),#8486);+#8482 = LINE('',#8483,#8484);+#8483 = CARTESIAN_POINT('',(0.,0.));+#8484 = VECTOR('',#8485,1.);+#8485 = DIRECTION('',(0.,-1.));+#8486 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8487 = ADVANCED_FACE('',(#8488),#5132,.T.);+#8488 = FACE_BOUND('',#8489,.T.);+#8489 = EDGE_LOOP('',(#8490,#8491,#8514,#8535));+#8490 = ORIENTED_EDGE('',*,*,#5119,.F.);+#8491 = ORIENTED_EDGE('',*,*,#8492,.T.);+#8492 = EDGE_CURVE('',#5094,#8493,#8495,.T.);+#8493 = VERTEX_POINT('',#8494);+#8494 = CARTESIAN_POINT('',(-0.723979317801,-0.135097074963,0.97));+#8495 = SURFACE_CURVE('',#8496,(#8500,#8507),.PCURVE_S1.);+#8496 = LINE('',#8497,#8498);+#8497 = CARTESIAN_POINT('',(-0.723979317801,-0.135097074963,1.07));+#8498 = VECTOR('',#8499,1.);+#8499 = DIRECTION('',(-0.,-0.,-1.));+#8500 = PCURVE('',#5132,#8501);+#8501 = DEFINITIONAL_REPRESENTATION('',(#8502),#8506);+#8502 = LINE('',#8503,#8504);+#8503 = CARTESIAN_POINT('',(0.,0.));+#8504 = VECTOR('',#8505,1.);+#8505 = DIRECTION('',(0.,-1.));+#8506 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8507 = PCURVE('',#5108,#8508);+#8508 = DEFINITIONAL_REPRESENTATION('',(#8509),#8513);+#8509 = LINE('',#8510,#8511);+#8510 = CARTESIAN_POINT('',(3.868082682292E-02,0.));+#8511 = VECTOR('',#8512,1.);+#8512 = DIRECTION('',(0.,-1.));+#8513 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8514 = ORIENTED_EDGE('',*,*,#8515,.T.);+#8515 = EDGE_CURVE('',#8493,#8417,#8516,.T.);+#8516 = SURFACE_CURVE('',#8517,(#8521,#8528),.PCURVE_S1.);+#8517 = LINE('',#8518,#8519);+#8518 = CARTESIAN_POINT('',(-0.723979317801,-0.135097074963,0.97));+#8519 = VECTOR('',#8520,1.);+#8520 = DIRECTION('',(0.,1.,0.));+#8521 = PCURVE('',#5132,#8522);+#8522 = DEFINITIONAL_REPRESENTATION('',(#8523),#8527);+#8523 = LINE('',#8524,#8525);+#8524 = CARTESIAN_POINT('',(0.,-0.1));+#8525 = VECTOR('',#8526,1.);+#8526 = DIRECTION('',(1.,0.));+#8527 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8528 = PCURVE('',#8455,#8529);+#8529 = DEFINITIONAL_REPRESENTATION('',(#8530),#8534);+#8530 = LINE('',#8531,#8532);+#8531 = CARTESIAN_POINT('',(9.832170758929E-02,0.));+#8532 = VECTOR('',#8533,1.);+#8533 = DIRECTION('',(0.,1.));+#8534 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8535 = ORIENTED_EDGE('',*,*,#8416,.F.);+#8536 = ADVANCED_FACE('',(#8537),#5108,.T.);+#8537 = FACE_BOUND('',#8538,.T.);+#8538 = EDGE_LOOP('',(#8539,#8540,#8563,#8584));+#8539 = ORIENTED_EDGE('',*,*,#5093,.F.);+#8540 = ORIENTED_EDGE('',*,*,#8541,.T.);+#8541 = EDGE_CURVE('',#5068,#8542,#8544,.T.);+#8542 = VERTEX_POINT('',#8543);+#8543 = CARTESIAN_POINT('',(-0.685298490978,-0.135097074963,0.97));+#8544 = SURFACE_CURVE('',#8545,(#8549,#8556),.PCURVE_S1.);+#8545 = LINE('',#8546,#8547);+#8546 = CARTESIAN_POINT('',(-0.685298490978,-0.135097074963,1.07));+#8547 = VECTOR('',#8548,1.);+#8548 = DIRECTION('',(-0.,-0.,-1.));+#8549 = PCURVE('',#5108,#8550);+#8550 = DEFINITIONAL_REPRESENTATION('',(#8551),#8555);+#8551 = LINE('',#8552,#8553);+#8552 = CARTESIAN_POINT('',(0.,0.));+#8553 = VECTOR('',#8554,1.);+#8554 = DIRECTION('',(0.,-1.));+#8555 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8556 = PCURVE('',#5082,#8557);+#8557 = DEFINITIONAL_REPRESENTATION('',(#8558),#8562);+#8558 = LINE('',#8559,#8560);+#8559 = CARTESIAN_POINT('',(0.252092285156,0.));+#8560 = VECTOR('',#8561,1.);+#8561 = DIRECTION('',(0.,-1.));+#8562 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8563 = ORIENTED_EDGE('',*,*,#8564,.T.);+#8564 = EDGE_CURVE('',#8542,#8493,#8565,.T.);+#8565 = SURFACE_CURVE('',#8566,(#8570,#8577),.PCURVE_S1.);+#8566 = LINE('',#8567,#8568);+#8567 = CARTESIAN_POINT('',(-0.685298490978,-0.135097074963,0.97));+#8568 = VECTOR('',#8569,1.);+#8569 = DIRECTION('',(-1.,0.,0.));+#8570 = PCURVE('',#5108,#8571);+#8571 = DEFINITIONAL_REPRESENTATION('',(#8572),#8576);+#8572 = LINE('',#8573,#8574);+#8573 = CARTESIAN_POINT('',(0.,-0.1));+#8574 = VECTOR('',#8575,1.);+#8575 = DIRECTION('',(1.,0.));+#8576 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8577 = PCURVE('',#8455,#8578);+#8578 = DEFINITIONAL_REPRESENTATION('',(#8579),#8583);+#8579 = LINE('',#8580,#8581);+#8580 = CARTESIAN_POINT('',(0.137002534412,0.));+#8581 = VECTOR('',#8582,1.);+#8582 = DIRECTION('',(-1.,0.));+#8583 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8584 = ORIENTED_EDGE('',*,*,#8492,.F.);+#8585 = ADVANCED_FACE('',(#8586),#5082,.T.);+#8586 = FACE_BOUND('',#8587,.T.);+#8587 = EDGE_LOOP('',(#8588,#8589,#8612,#8633));+#8588 = ORIENTED_EDGE('',*,*,#5067,.F.);+#8589 = ORIENTED_EDGE('',*,*,#8590,.T.);+#8590 = EDGE_CURVE('',#5042,#8591,#8593,.T.);+#8591 = VERTEX_POINT('',#8592);+#8592 = CARTESIAN_POINT('',(-0.685298490978,0.116995210193,0.97));+#8593 = SURFACE_CURVE('',#8594,(#8598,#8605),.PCURVE_S1.);+#8594 = LINE('',#8595,#8596);+#8595 = CARTESIAN_POINT('',(-0.685298490978,0.116995210193,1.07));+#8596 = VECTOR('',#8597,1.);+#8597 = DIRECTION('',(-0.,-0.,-1.));+#8598 = PCURVE('',#5082,#8599);+#8599 = DEFINITIONAL_REPRESENTATION('',(#8600),#8604);+#8600 = LINE('',#8601,#8602);+#8601 = CARTESIAN_POINT('',(0.,0.));+#8602 = VECTOR('',#8603,1.);+#8603 = DIRECTION('',(0.,-1.));+#8604 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8605 = PCURVE('',#5056,#8606);+#8606 = DEFINITIONAL_REPRESENTATION('',(#8607),#8611);+#8607 = LINE('',#8608,#8609);+#8608 = CARTESIAN_POINT('',(8.89849562872E-02,0.));+#8609 = VECTOR('',#8610,1.);+#8610 = DIRECTION('',(0.,-1.));+#8611 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8612 = ORIENTED_EDGE('',*,*,#8613,.T.);+#8613 = EDGE_CURVE('',#8591,#8542,#8614,.T.);+#8614 = SURFACE_CURVE('',#8615,(#8619,#8626),.PCURVE_S1.);+#8615 = LINE('',#8616,#8617);+#8616 = CARTESIAN_POINT('',(-0.685298490978,0.116995210193,0.97));+#8617 = VECTOR('',#8618,1.);+#8618 = DIRECTION('',(0.,-1.,0.));+#8619 = PCURVE('',#5082,#8620);+#8620 = DEFINITIONAL_REPRESENTATION('',(#8621),#8625);+#8621 = LINE('',#8622,#8623);+#8622 = CARTESIAN_POINT('',(0.,-0.1));+#8623 = VECTOR('',#8624,1.);+#8624 = DIRECTION('',(1.,0.));+#8625 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8626 = PCURVE('',#8455,#8627);+#8627 = DEFINITIONAL_REPRESENTATION('',(#8628),#8632);+#8628 = LINE('',#8629,#8630);+#8629 = CARTESIAN_POINT('',(0.137002534412,0.252092285156));+#8630 = VECTOR('',#8631,1.);+#8631 = DIRECTION('',(0.,-1.));+#8632 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8633 = ORIENTED_EDGE('',*,*,#8541,.F.);+#8634 = ADVANCED_FACE('',(#8635),#5056,.T.);+#8635 = FACE_BOUND('',#8636,.T.);+#8636 = EDGE_LOOP('',(#8637,#8638,#8661,#8682));+#8637 = ORIENTED_EDGE('',*,*,#5041,.F.);+#8638 = ORIENTED_EDGE('',*,*,#8639,.T.);+#8639 = EDGE_CURVE('',#5016,#8640,#8642,.T.);+#8640 = VERTEX_POINT('',#8641);+#8641 = CARTESIAN_POINT('',(-0.596313534691,0.116995210193,0.97));+#8642 = SURFACE_CURVE('',#8643,(#8647,#8654),.PCURVE_S1.);+#8643 = LINE('',#8644,#8645);+#8644 = CARTESIAN_POINT('',(-0.596313534691,0.116995210193,1.07));+#8645 = VECTOR('',#8646,1.);+#8646 = DIRECTION('',(-0.,-0.,-1.));+#8647 = PCURVE('',#5056,#8648);+#8648 = DEFINITIONAL_REPRESENTATION('',(#8649),#8653);+#8649 = LINE('',#8650,#8651);+#8650 = CARTESIAN_POINT('',(0.,0.));+#8651 = VECTOR('',#8652,1.);+#8652 = DIRECTION('',(0.,-1.));+#8653 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8654 = PCURVE('',#5030,#8655);+#8655 = DEFINITIONAL_REPRESENTATION('',(#8656),#8660);+#8656 = LINE('',#8657,#8658);+#8657 = CARTESIAN_POINT('',(3.239281063988E-02,0.));+#8658 = VECTOR('',#8659,1.);+#8659 = DIRECTION('',(0.,-1.));+#8660 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8661 = ORIENTED_EDGE('',*,*,#8662,.T.);+#8662 = EDGE_CURVE('',#8640,#8591,#8663,.T.);+#8663 = SURFACE_CURVE('',#8664,(#8668,#8675),.PCURVE_S1.);+#8664 = LINE('',#8665,#8666);+#8665 = CARTESIAN_POINT('',(-0.596313534691,0.116995210193,0.97));+#8666 = VECTOR('',#8667,1.);+#8667 = DIRECTION('',(-1.,0.,0.));+#8668 = PCURVE('',#5056,#8669);+#8669 = DEFINITIONAL_REPRESENTATION('',(#8670),#8674);+#8670 = LINE('',#8671,#8672);+#8671 = CARTESIAN_POINT('',(0.,-0.1));+#8672 = VECTOR('',#8673,1.);+#8673 = DIRECTION('',(1.,0.));+#8674 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8675 = PCURVE('',#8455,#8676);+#8676 = DEFINITIONAL_REPRESENTATION('',(#8677),#8681);+#8677 = LINE('',#8678,#8679);+#8678 = CARTESIAN_POINT('',(0.225987490699,0.252092285156));+#8679 = VECTOR('',#8680,1.);+#8680 = DIRECTION('',(-1.,0.));+#8681 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8682 = ORIENTED_EDGE('',*,*,#8590,.F.);+#8683 = ADVANCED_FACE('',(#8684),#5030,.T.);+#8684 = FACE_BOUND('',#8685,.T.);+#8685 = EDGE_LOOP('',(#8686,#8687,#8710,#8731));+#8686 = ORIENTED_EDGE('',*,*,#5015,.F.);+#8687 = ORIENTED_EDGE('',*,*,#8688,.T.);+#8688 = EDGE_CURVE('',#4990,#8689,#8691,.T.);+#8689 = VERTEX_POINT('',#8690);+#8690 = CARTESIAN_POINT('',(-0.596313534691,0.149388020833,0.97));+#8691 = SURFACE_CURVE('',#8692,(#8696,#8703),.PCURVE_S1.);+#8692 = LINE('',#8693,#8694);+#8693 = CARTESIAN_POINT('',(-0.596313534691,0.149388020833,1.07));+#8694 = VECTOR('',#8695,1.);+#8695 = DIRECTION('',(-0.,-0.,-1.));+#8696 = PCURVE('',#5030,#8697);+#8697 = DEFINITIONAL_REPRESENTATION('',(#8698),#8702);+#8698 = LINE('',#8699,#8700);+#8699 = CARTESIAN_POINT('',(0.,0.));+#8700 = VECTOR('',#8701,1.);+#8701 = DIRECTION('',(0.,-1.));+#8702 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8703 = PCURVE('',#5004,#8704);+#8704 = DEFINITIONAL_REPRESENTATION('',(#8705),#8709);+#8705 = LINE('',#8706,#8707);+#8706 = CARTESIAN_POINT('',(0.217031831287,0.));+#8707 = VECTOR('',#8708,1.);+#8708 = DIRECTION('',(0.,-1.));+#8709 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8710 = ORIENTED_EDGE('',*,*,#8711,.T.);+#8711 = EDGE_CURVE('',#8689,#8640,#8712,.T.);+#8712 = SURFACE_CURVE('',#8713,(#8717,#8724),.PCURVE_S1.);+#8713 = LINE('',#8714,#8715);+#8714 = CARTESIAN_POINT('',(-0.596313534691,0.149388020833,0.97));+#8715 = VECTOR('',#8716,1.);+#8716 = DIRECTION('',(0.,-1.,0.));+#8717 = PCURVE('',#5030,#8718);+#8718 = DEFINITIONAL_REPRESENTATION('',(#8719),#8723);+#8719 = LINE('',#8720,#8721);+#8720 = CARTESIAN_POINT('',(0.,-0.1));+#8721 = VECTOR('',#8722,1.);+#8722 = DIRECTION('',(1.,0.));+#8723 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8724 = PCURVE('',#8455,#8725);+#8725 = DEFINITIONAL_REPRESENTATION('',(#8726),#8730);+#8726 = LINE('',#8727,#8728);+#8727 = CARTESIAN_POINT('',(0.225987490699,0.284485095796));+#8728 = VECTOR('',#8729,1.);+#8729 = DIRECTION('',(0.,-1.));+#8730 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8731 = ORIENTED_EDGE('',*,*,#8639,.F.);+#8732 = ADVANCED_FACE('',(#8733),#5004,.T.);+#8733 = FACE_BOUND('',#8734,.T.);+#8734 = EDGE_LOOP('',(#8735,#8736,#8759,#8780));+#8735 = ORIENTED_EDGE('',*,*,#4989,.F.);+#8736 = ORIENTED_EDGE('',*,*,#8737,.T.);+#8737 = EDGE_CURVE('',#4964,#8738,#8740,.T.);+#8738 = VERTEX_POINT('',#8739);+#8739 = CARTESIAN_POINT('',(-0.813345365978,0.149388020833,0.97));+#8740 = SURFACE_CURVE('',#8741,(#8745,#8752),.PCURVE_S1.);+#8741 = LINE('',#8742,#8743);+#8742 = CARTESIAN_POINT('',(-0.813345365978,0.149388020833,1.07));+#8743 = VECTOR('',#8744,1.);+#8744 = DIRECTION('',(-0.,-0.,-1.));+#8745 = PCURVE('',#5004,#8746);+#8746 = DEFINITIONAL_REPRESENTATION('',(#8747),#8751);+#8747 = LINE('',#8748,#8749);+#8748 = CARTESIAN_POINT('',(0.,0.));+#8749 = VECTOR('',#8750,1.);+#8750 = DIRECTION('',(0.,-1.));+#8751 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8752 = PCURVE('',#4978,#8753);+#8753 = DEFINITIONAL_REPRESENTATION('',(#8754),#8758);+#8754 = LINE('',#8755,#8756);+#8755 = CARTESIAN_POINT('',(3.239281063988E-02,0.));+#8756 = VECTOR('',#8757,1.);+#8757 = DIRECTION('',(0.,-1.));+#8758 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8759 = ORIENTED_EDGE('',*,*,#8760,.T.);+#8760 = EDGE_CURVE('',#8738,#8689,#8761,.T.);+#8761 = SURFACE_CURVE('',#8762,(#8766,#8773),.PCURVE_S1.);+#8762 = LINE('',#8763,#8764);+#8763 = CARTESIAN_POINT('',(-0.813345365978,0.149388020833,0.97));+#8764 = VECTOR('',#8765,1.);+#8765 = DIRECTION('',(1.,0.,0.));+#8766 = PCURVE('',#5004,#8767);+#8767 = DEFINITIONAL_REPRESENTATION('',(#8768),#8772);+#8768 = LINE('',#8769,#8770);+#8769 = CARTESIAN_POINT('',(0.,-0.1));+#8770 = VECTOR('',#8771,1.);+#8771 = DIRECTION('',(1.,0.));+#8772 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8773 = PCURVE('',#8455,#8774);+#8774 = DEFINITIONAL_REPRESENTATION('',(#8775),#8779);+#8775 = LINE('',#8776,#8777);+#8776 = CARTESIAN_POINT('',(8.955659412202E-03,0.284485095796));+#8777 = VECTOR('',#8778,1.);+#8778 = DIRECTION('',(1.,0.));+#8779 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8780 = ORIENTED_EDGE('',*,*,#8688,.F.);+#8781 = ADVANCED_FACE('',(#8782),#4978,.T.);+#8782 = FACE_BOUND('',#8783,.T.);+#8783 = EDGE_LOOP('',(#8784,#8785,#8786,#8807));+#8784 = ORIENTED_EDGE('',*,*,#4963,.F.);+#8785 = ORIENTED_EDGE('',*,*,#8467,.T.);+#8786 = ORIENTED_EDGE('',*,*,#8787,.T.);+#8787 = EDGE_CURVE('',#8440,#8738,#8788,.T.);+#8788 = SURFACE_CURVE('',#8789,(#8793,#8800),.PCURVE_S1.);+#8789 = LINE('',#8790,#8791);+#8790 = CARTESIAN_POINT('',(-0.813345365978,0.116995210193,0.97));+#8791 = VECTOR('',#8792,1.);+#8792 = DIRECTION('',(0.,1.,0.));+#8793 = PCURVE('',#4978,#8794);+#8794 = DEFINITIONAL_REPRESENTATION('',(#8795),#8799);+#8795 = LINE('',#8796,#8797);+#8796 = CARTESIAN_POINT('',(0.,-0.1));+#8797 = VECTOR('',#8798,1.);+#8798 = DIRECTION('',(1.,0.));+#8799 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8800 = PCURVE('',#8455,#8801);+#8801 = DEFINITIONAL_REPRESENTATION('',(#8802),#8806);+#8802 = LINE('',#8803,#8804);+#8803 = CARTESIAN_POINT('',(8.955659412202E-03,0.252092285156));+#8804 = VECTOR('',#8805,1.);+#8805 = DIRECTION('',(0.,1.));+#8806 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8807 = ORIENTED_EDGE('',*,*,#8737,.F.);+#8808 = ADVANCED_FACE('',(#8809),#5162,.T.);+#8809 = FACE_BOUND('',#8810,.T.);+#8810 = EDGE_LOOP('',(#8811,#8812,#8835,#8863));+#8811 = ORIENTED_EDGE('',*,*,#5145,.F.);+#8812 = ORIENTED_EDGE('',*,*,#8813,.T.);+#8813 = EDGE_CURVE('',#5146,#8814,#8816,.T.);+#8814 = VERTEX_POINT('',#8815);+#8815 = CARTESIAN_POINT('',(-0.511330043248,-0.135097074963,0.97));+#8816 = SURFACE_CURVE('',#8817,(#8821,#8828),.PCURVE_S1.);+#8817 = LINE('',#8818,#8819);+#8818 = CARTESIAN_POINT('',(-0.511330043248,-0.135097074963,1.07));+#8819 = VECTOR('',#8820,1.);+#8820 = DIRECTION('',(-0.,-0.,-1.));+#8821 = PCURVE('',#5162,#8822);+#8822 = DEFINITIONAL_REPRESENTATION('',(#8823),#8827);+#8823 = LINE('',#8824,#8825);+#8824 = CARTESIAN_POINT('',(0.,0.));+#8825 = VECTOR('',#8826,1.);+#8826 = DIRECTION('',(0.,-1.));+#8827 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8828 = PCURVE('',#5408,#8829);+#8829 = DEFINITIONAL_REPRESENTATION('',(#8830),#8834);+#8830 = LINE('',#8831,#8832);+#8831 = CARTESIAN_POINT('',(0.114327566964,0.));+#8832 = VECTOR('',#8833,1.);+#8833 = DIRECTION('',(0.,-1.));+#8834 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8835 = ORIENTED_EDGE('',*,*,#8836,.T.);+#8836 = EDGE_CURVE('',#8814,#8837,#8839,.T.);+#8837 = VERTEX_POINT('',#8838);+#8838 = CARTESIAN_POINT('',(-0.549820324126,-0.135097074963,0.97));+#8839 = SURFACE_CURVE('',#8840,(#8844,#8851),.PCURVE_S1.);+#8840 = LINE('',#8841,#8842);+#8841 = CARTESIAN_POINT('',(-0.511330043248,-0.135097074963,0.97));+#8842 = VECTOR('',#8843,1.);+#8843 = DIRECTION('',(-1.,0.,0.));+#8844 = PCURVE('',#5162,#8845);+#8845 = DEFINITIONAL_REPRESENTATION('',(#8846),#8850);+#8846 = LINE('',#8847,#8848);+#8847 = CARTESIAN_POINT('',(0.,-0.1));+#8848 = VECTOR('',#8849,1.);+#8849 = DIRECTION('',(1.,0.));+#8850 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8851 = PCURVE('',#8852,#8857);+#8852 = PLANE('',#8853);+#8853 = AXIS2_PLACEMENT_3D('',#8854,#8855,#8856);+#8854 = CARTESIAN_POINT('',(-0.587357875279,-0.135097074963,0.97));+#8855 = DIRECTION('',(0.,0.,1.));+#8856 = DIRECTION('',(1.,0.,0.));+#8857 = DEFINITIONAL_REPRESENTATION('',(#8858),#8862);+#8858 = LINE('',#8859,#8860);+#8859 = CARTESIAN_POINT('',(7.602783203125E-02,0.));+#8860 = VECTOR('',#8861,1.);+#8861 = DIRECTION('',(-1.,0.));+#8862 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8863 = ORIENTED_EDGE('',*,*,#8864,.F.);+#8864 = EDGE_CURVE('',#5148,#8837,#8865,.T.);+#8865 = SURFACE_CURVE('',#8866,(#8870,#8877),.PCURVE_S1.);+#8866 = LINE('',#8867,#8868);+#8867 = CARTESIAN_POINT('',(-0.549820324126,-0.135097074963,1.07));+#8868 = VECTOR('',#8869,1.);+#8869 = DIRECTION('',(-0.,-0.,-1.));+#8870 = PCURVE('',#5162,#8871);+#8871 = DEFINITIONAL_REPRESENTATION('',(#8872),#8876);+#8872 = LINE('',#8873,#8874);+#8873 = CARTESIAN_POINT('',(3.849028087798E-02,0.));+#8874 = VECTOR('',#8875,1.);+#8875 = DIRECTION('',(0.,-1.));+#8876 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8877 = PCURVE('',#5188,#8878);+#8878 = DEFINITIONAL_REPRESENTATION('',(#8879),#8883);+#8879 = LINE('',#8880,#8881);+#8880 = CARTESIAN_POINT('',(0.,0.));+#8881 = VECTOR('',#8882,1.);+#8882 = DIRECTION('',(0.,-1.));+#8883 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8884 = ADVANCED_FACE('',(#8885),#5408,.T.);+#8885 = FACE_BOUND('',#8886,.T.);+#8886 = EDGE_LOOP('',(#8887,#8888,#8911,#8932));+#8887 = ORIENTED_EDGE('',*,*,#5395,.F.);+#8888 = ORIENTED_EDGE('',*,*,#8889,.T.);+#8889 = EDGE_CURVE('',#5370,#8890,#8892,.T.);+#8890 = VERTEX_POINT('',#8891);+#8891 = CARTESIAN_POINT('',(-0.511330043248,-2.076950799851E-02,0.97));+#8892 = SURFACE_CURVE('',#8893,(#8897,#8904),.PCURVE_S1.);+#8893 = LINE('',#8894,#8895);+#8894 = CARTESIAN_POINT('',(-0.511330043248,-2.076950799851E-02,1.07));+#8895 = VECTOR('',#8896,1.);+#8896 = DIRECTION('',(-0.,-0.,-1.));+#8897 = PCURVE('',#5408,#8898);+#8898 = DEFINITIONAL_REPRESENTATION('',(#8899),#8903);+#8899 = LINE('',#8900,#8901);+#8900 = CARTESIAN_POINT('',(0.,0.));+#8901 = VECTOR('',#8902,1.);+#8902 = DIRECTION('',(0.,-1.));+#8903 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8904 = PCURVE('',#5384,#8905);+#8905 = DEFINITIONAL_REPRESENTATION('',(#8906),#8910);+#8906 = LINE('',#8907,#8908);+#8907 = CARTESIAN_POINT('',(4.458775111607E-02,0.));+#8908 = VECTOR('',#8909,1.);+#8909 = DIRECTION('',(0.,-1.));+#8910 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8911 = ORIENTED_EDGE('',*,*,#8912,.T.);+#8912 = EDGE_CURVE('',#8890,#8814,#8913,.T.);+#8913 = SURFACE_CURVE('',#8914,(#8918,#8925),.PCURVE_S1.);+#8914 = LINE('',#8915,#8916);+#8915 = CARTESIAN_POINT('',(-0.511330043248,-2.076950799851E-02,0.97));+#8916 = VECTOR('',#8917,1.);+#8917 = DIRECTION('',(0.,-1.,0.));+#8918 = PCURVE('',#5408,#8919);+#8919 = DEFINITIONAL_REPRESENTATION('',(#8920),#8924);+#8920 = LINE('',#8921,#8922);+#8921 = CARTESIAN_POINT('',(0.,-0.1));+#8922 = VECTOR('',#8923,1.);+#8923 = DIRECTION('',(1.,0.));+#8924 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8925 = PCURVE('',#8852,#8926);+#8926 = DEFINITIONAL_REPRESENTATION('',(#8927),#8931);+#8927 = LINE('',#8928,#8929);+#8928 = CARTESIAN_POINT('',(7.602783203125E-02,0.114327566964));+#8929 = VECTOR('',#8930,1.);+#8930 = DIRECTION('',(0.,-1.));+#8931 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8932 = ORIENTED_EDGE('',*,*,#8813,.F.);+#8933 = ADVANCED_FACE('',(#8934),#5384,.T.);+#8934 = FACE_BOUND('',#8935,.T.);+#8935 = EDGE_LOOP('',(#8936,#8937,#8960,#8981));+#8936 = ORIENTED_EDGE('',*,*,#5369,.F.);+#8937 = ORIENTED_EDGE('',*,*,#8938,.T.);+#8938 = EDGE_CURVE('',#5334,#8939,#8941,.T.);+#8939 = VERTEX_POINT('',#8940);+#8940 = CARTESIAN_POINT('',(-0.466742292132,-2.076950799851E-02,0.97));+#8941 = SURFACE_CURVE('',#8942,(#8946,#8953),.PCURVE_S1.);+#8942 = LINE('',#8943,#8944);+#8943 = CARTESIAN_POINT('',(-0.466742292132,-2.076950799851E-02,1.07));+#8944 = VECTOR('',#8945,1.);+#8945 = DIRECTION('',(-0.,-0.,-1.));+#8946 = PCURVE('',#5384,#8947);+#8947 = DEFINITIONAL_REPRESENTATION('',(#8948),#8952);+#8948 = LINE('',#8949,#8950);+#8949 = CARTESIAN_POINT('',(0.,0.));+#8950 = VECTOR('',#8951,1.);+#8951 = DIRECTION('',(0.,-1.));+#8952 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8953 = PCURVE('',#5353,#8954);+#8954 = DEFINITIONAL_REPRESENTATION('',(#8955),#8959);+#8955 = LINE('',#8956,#8957);+#8956 = CARTESIAN_POINT('',(1.,0.));+#8957 = VECTOR('',#8958,1.);+#8958 = DIRECTION('',(0.,-1.));+#8959 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8960 = ORIENTED_EDGE('',*,*,#8961,.T.);+#8961 = EDGE_CURVE('',#8939,#8890,#8962,.T.);+#8962 = SURFACE_CURVE('',#8963,(#8967,#8974),.PCURVE_S1.);+#8963 = LINE('',#8964,#8965);+#8964 = CARTESIAN_POINT('',(-0.466742292132,-2.076950799851E-02,0.97));+#8965 = VECTOR('',#8966,1.);+#8966 = DIRECTION('',(-1.,0.,0.));+#8967 = PCURVE('',#5384,#8968);+#8968 = DEFINITIONAL_REPRESENTATION('',(#8969),#8973);+#8969 = LINE('',#8970,#8971);+#8970 = CARTESIAN_POINT('',(0.,-0.1));+#8971 = VECTOR('',#8972,1.);+#8972 = DIRECTION('',(1.,0.));+#8973 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8974 = PCURVE('',#8852,#8975);+#8975 = DEFINITIONAL_REPRESENTATION('',(#8976),#8980);+#8976 = LINE('',#8977,#8978);+#8977 = CARTESIAN_POINT('',(0.120615583147,0.114327566964));+#8978 = VECTOR('',#8979,1.);+#8979 = DIRECTION('',(-1.,0.));+#8980 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8981 = ORIENTED_EDGE('',*,*,#8889,.F.);+#8982 = ADVANCED_FACE('',(#8983),#5353,.T.);+#8983 = FACE_BOUND('',#8984,.T.);+#8984 = EDGE_LOOP('',(#8985,#8986,#9009,#9030));+#8985 = ORIENTED_EDGE('',*,*,#5333,.T.);+#8986 = ORIENTED_EDGE('',*,*,#8987,.T.);+#8987 = EDGE_CURVE('',#5298,#8988,#8990,.T.);+#8988 = VERTEX_POINT('',#8989);+#8989 = CARTESIAN_POINT('',(-0.394430106027,7.621837797616E-04,0.97));+#8990 = SURFACE_CURVE('',#8991,(#8995,#9002),.PCURVE_S1.);+#8991 = LINE('',#8992,#8993);+#8992 = CARTESIAN_POINT('',(-0.394430106027,7.621837797616E-04,1.07));+#8993 = VECTOR('',#8994,1.);+#8994 = DIRECTION('',(-0.,-0.,-1.));+#8995 = PCURVE('',#5353,#8996);+#8996 = DEFINITIONAL_REPRESENTATION('',(#8997),#9001);+#8997 = LINE('',#8998,#8999);+#8998 = CARTESIAN_POINT('',(0.,0.));+#8999 = VECTOR('',#9000,1.);+#9000 = DIRECTION('',(0.,-1.));+#9001 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9002 = PCURVE('',#5317,#9003);+#9003 = DEFINITIONAL_REPRESENTATION('',(#9004),#9008);+#9004 = LINE('',#9005,#9006);+#9005 = CARTESIAN_POINT('',(1.,0.));+#9006 = VECTOR('',#9007,1.);+#9007 = DIRECTION('',(0.,-1.));+#9008 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9009 = ORIENTED_EDGE('',*,*,#9010,.T.);+#9010 = EDGE_CURVE('',#8988,#8939,#9011,.T.);+#9011 = SURFACE_CURVE('',#9012,(#9016,#9023),.PCURVE_S1.);+#9012 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9013,#9014,#9015),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9013 = CARTESIAN_POINT('',(-0.394430106027,7.621837797616E-04,0.97));+#9014 = CARTESIAN_POINT('',(-0.418915259952,-2.076950799851E-02,0.97));+#9015 = CARTESIAN_POINT('',(-0.466742292132,-2.076950799851E-02,0.97));+#9016 = PCURVE('',#5353,#9017);+#9017 = DEFINITIONAL_REPRESENTATION('',(#9018),#9022);+#9018 = LINE('',#9019,#9020);+#9019 = CARTESIAN_POINT('',(0.,-0.1));+#9020 = VECTOR('',#9021,1.);+#9021 = DIRECTION('',(1.,0.));+#9022 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9023 = PCURVE('',#8852,#9024);+#9024 = DEFINITIONAL_REPRESENTATION('',(#9025),#9029);+#9025 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9026,#9027,#9028),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9026 = CARTESIAN_POINT('',(0.192927769252,0.135859258743));+#9027 = CARTESIAN_POINT('',(0.168442615327,0.114327566964));+#9028 = CARTESIAN_POINT('',(0.120615583147,0.114327566964));+#9029 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9030 = ORIENTED_EDGE('',*,*,#8938,.F.);+#9031 = ADVANCED_FACE('',(#9032),#5317,.T.);+#9032 = FACE_BOUND('',#9033,.T.);+#9033 = EDGE_LOOP('',(#9034,#9035,#9058,#9079));+#9034 = ORIENTED_EDGE('',*,*,#5297,.T.);+#9035 = ORIENTED_EDGE('',*,*,#9036,.T.);+#9036 = EDGE_CURVE('',#5262,#9037,#9039,.T.);+#9037 = VERTEX_POINT('',#9038);+#9038 = CARTESIAN_POINT('',(-0.369944952102,6.440452938988E-02,0.97));+#9039 = SURFACE_CURVE('',#9040,(#9044,#9051),.PCURVE_S1.);+#9040 = LINE('',#9041,#9042);+#9041 = CARTESIAN_POINT('',(-0.369944952102,6.440452938988E-02,1.07));+#9042 = VECTOR('',#9043,1.);+#9043 = DIRECTION('',(-0.,-0.,-1.));+#9044 = PCURVE('',#5317,#9045);+#9045 = DEFINITIONAL_REPRESENTATION('',(#9046),#9050);+#9046 = LINE('',#9047,#9048);+#9047 = CARTESIAN_POINT('',(0.,0.));+#9048 = VECTOR('',#9049,1.);+#9049 = DIRECTION('',(0.,-1.));+#9050 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9051 = PCURVE('',#5281,#9052);+#9052 = DEFINITIONAL_REPRESENTATION('',(#9053),#9057);+#9053 = LINE('',#9054,#9055);+#9054 = CARTESIAN_POINT('',(1.,0.));+#9055 = VECTOR('',#9056,1.);+#9056 = DIRECTION('',(0.,-1.));+#9057 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9058 = ORIENTED_EDGE('',*,*,#9059,.T.);+#9059 = EDGE_CURVE('',#9037,#8988,#9060,.T.);+#9060 = SURFACE_CURVE('',#9061,(#9065,#9072),.PCURVE_S1.);+#9061 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9062,#9063,#9064),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9062 = CARTESIAN_POINT('',(-0.369944952102,6.440452938988E-02,0.97));+#9063 = CARTESIAN_POINT('',(-0.369944952102,2.229387555804E-02,0.97));+#9064 = CARTESIAN_POINT('',(-0.394430106027,7.621837797616E-04,0.97));+#9065 = PCURVE('',#5317,#9066);+#9066 = DEFINITIONAL_REPRESENTATION('',(#9067),#9071);+#9067 = LINE('',#9068,#9069);+#9068 = CARTESIAN_POINT('',(0.,-0.1));+#9069 = VECTOR('',#9070,1.);+#9070 = DIRECTION('',(1.,0.));+#9071 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9072 = PCURVE('',#8852,#9073);+#9073 = DEFINITIONAL_REPRESENTATION('',(#9074),#9078);+#9074 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9075,#9076,#9077),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9075 = CARTESIAN_POINT('',(0.217412923177,0.199501604353));+#9076 = CARTESIAN_POINT('',(0.217412923177,0.157390950521));+#9077 = CARTESIAN_POINT('',(0.192927769252,0.135859258743));+#9078 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9079 = ORIENTED_EDGE('',*,*,#8987,.F.);+#9080 = ADVANCED_FACE('',(#9081),#5281,.T.);+#9081 = FACE_BOUND('',#9082,.T.);+#9082 = EDGE_LOOP('',(#9083,#9084,#9107,#9128));+#9083 = ORIENTED_EDGE('',*,*,#5261,.T.);+#9084 = ORIENTED_EDGE('',*,*,#9085,.T.);+#9085 = EDGE_CURVE('',#5226,#9086,#9088,.T.);+#9086 = VERTEX_POINT('',#9087);+#9087 = CARTESIAN_POINT('',(-0.394525378999,0.127761056083,0.97));+#9088 = SURFACE_CURVE('',#9089,(#9093,#9100),.PCURVE_S1.);+#9089 = LINE('',#9090,#9091);+#9090 = CARTESIAN_POINT('',(-0.394525378999,0.127761056083,1.07));+#9091 = VECTOR('',#9092,1.);+#9092 = DIRECTION('',(-0.,-0.,-1.));+#9093 = PCURVE('',#5281,#9094);+#9094 = DEFINITIONAL_REPRESENTATION('',(#9095),#9099);+#9095 = LINE('',#9096,#9097);+#9096 = CARTESIAN_POINT('',(0.,0.));+#9097 = VECTOR('',#9098,1.);+#9098 = DIRECTION('',(0.,-1.));+#9099 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9100 = PCURVE('',#5245,#9101);+#9101 = DEFINITIONAL_REPRESENTATION('',(#9102),#9106);+#9102 = LINE('',#9103,#9104);+#9103 = CARTESIAN_POINT('',(1.,0.));+#9104 = VECTOR('',#9105,1.);+#9105 = DIRECTION('',(0.,-1.));+#9106 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9107 = ORIENTED_EDGE('',*,*,#9108,.T.);+#9108 = EDGE_CURVE('',#9086,#9037,#9109,.T.);+#9109 = SURFACE_CURVE('',#9110,(#9114,#9121),.PCURVE_S1.);+#9110 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9111,#9112,#9113),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9111 = CARTESIAN_POINT('',(-0.394525378999,0.127761056083,0.97));+#9112 = CARTESIAN_POINT('',(-0.369944952102,0.106134091332,0.97));+#9113 = CARTESIAN_POINT('',(-0.369944952102,6.440452938988E-02,0.97));+#9114 = PCURVE('',#5281,#9115);+#9115 = DEFINITIONAL_REPRESENTATION('',(#9116),#9120);+#9116 = LINE('',#9117,#9118);+#9117 = CARTESIAN_POINT('',(0.,-0.1));+#9118 = VECTOR('',#9119,1.);+#9119 = DIRECTION('',(1.,0.));+#9120 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9121 = PCURVE('',#8852,#9122);+#9122 = DEFINITIONAL_REPRESENTATION('',(#9123),#9127);+#9123 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9124,#9125,#9126),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9124 = CARTESIAN_POINT('',(0.19283249628,0.262858131045));+#9125 = CARTESIAN_POINT('',(0.217412923177,0.241231166295));+#9126 = CARTESIAN_POINT('',(0.217412923177,0.199501604353));+#9127 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9128 = ORIENTED_EDGE('',*,*,#9036,.F.);+#9129 = ADVANCED_FACE('',(#9130),#5245,.T.);+#9130 = FACE_BOUND('',#9131,.T.);+#9131 = EDGE_LOOP('',(#9132,#9133,#9156,#9177));+#9132 = ORIENTED_EDGE('',*,*,#5225,.T.);+#9133 = ORIENTED_EDGE('',*,*,#9134,.T.);+#9134 = EDGE_CURVE('',#5200,#9135,#9137,.T.);+#9135 = VERTEX_POINT('',#9136);+#9136 = CARTESIAN_POINT('',(-0.466742292132,0.149388020833,0.97));+#9137 = SURFACE_CURVE('',#9138,(#9142,#9149),.PCURVE_S1.);+#9138 = LINE('',#9139,#9140);+#9139 = CARTESIAN_POINT('',(-0.466742292132,0.149388020833,1.07));+#9140 = VECTOR('',#9141,1.);+#9141 = DIRECTION('',(-0.,-0.,-1.));+#9142 = PCURVE('',#5245,#9143);+#9143 = DEFINITIONAL_REPRESENTATION('',(#9144),#9148);+#9144 = LINE('',#9145,#9146);+#9145 = CARTESIAN_POINT('',(0.,0.));+#9146 = VECTOR('',#9147,1.);+#9147 = DIRECTION('',(0.,-1.));+#9148 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9149 = PCURVE('',#5214,#9150);+#9150 = DEFINITIONAL_REPRESENTATION('',(#9151),#9155);+#9151 = LINE('',#9152,#9153);+#9152 = CARTESIAN_POINT('',(8.307803199405E-02,0.));+#9153 = VECTOR('',#9154,1.);+#9154 = DIRECTION('',(0.,-1.));+#9155 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9156 = ORIENTED_EDGE('',*,*,#9157,.T.);+#9157 = EDGE_CURVE('',#9135,#9086,#9158,.T.);+#9158 = SURFACE_CURVE('',#9159,(#9163,#9170),.PCURVE_S1.);+#9159 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9160,#9161,#9162),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9160 = CARTESIAN_POINT('',(-0.466742292132,0.149388020833,0.97));+#9161 = CARTESIAN_POINT('',(-0.419105805897,0.149388020833,0.97));+#9162 = CARTESIAN_POINT('',(-0.394525378999,0.127761056083,0.97));+#9163 = PCURVE('',#5245,#9164);+#9164 = DEFINITIONAL_REPRESENTATION('',(#9165),#9169);+#9165 = LINE('',#9166,#9167);+#9166 = CARTESIAN_POINT('',(0.,-0.1));+#9167 = VECTOR('',#9168,1.);+#9168 = DIRECTION('',(1.,0.));+#9169 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9170 = PCURVE('',#8852,#9171);+#9171 = DEFINITIONAL_REPRESENTATION('',(#9172),#9176);+#9172 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9173,#9174,#9175),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9173 = CARTESIAN_POINT('',(0.120615583147,0.284485095796));+#9174 = CARTESIAN_POINT('',(0.168252069382,0.284485095796));+#9175 = CARTESIAN_POINT('',(0.19283249628,0.262858131045));+#9176 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9177 = ORIENTED_EDGE('',*,*,#9085,.F.);+#9178 = ADVANCED_FACE('',(#9179),#5214,.T.);+#9179 = FACE_BOUND('',#9180,.T.);+#9180 = EDGE_LOOP('',(#9181,#9182,#9205,#9226));+#9181 = ORIENTED_EDGE('',*,*,#5199,.F.);+#9182 = ORIENTED_EDGE('',*,*,#9183,.T.);+#9183 = EDGE_CURVE('',#5174,#9184,#9186,.T.);+#9184 = VERTEX_POINT('',#9185);+#9185 = CARTESIAN_POINT('',(-0.549820324126,0.149388020833,0.97));+#9186 = SURFACE_CURVE('',#9187,(#9191,#9198),.PCURVE_S1.);+#9187 = LINE('',#9188,#9189);+#9188 = CARTESIAN_POINT('',(-0.549820324126,0.149388020833,1.07));+#9189 = VECTOR('',#9190,1.);+#9190 = DIRECTION('',(-0.,-0.,-1.));+#9191 = PCURVE('',#5214,#9192);+#9192 = DEFINITIONAL_REPRESENTATION('',(#9193),#9197);+#9193 = LINE('',#9194,#9195);+#9194 = CARTESIAN_POINT('',(0.,0.));+#9195 = VECTOR('',#9196,1.);+#9196 = DIRECTION('',(0.,-1.));+#9197 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9198 = PCURVE('',#5188,#9199);+#9199 = DEFINITIONAL_REPRESENTATION('',(#9200),#9204);+#9200 = LINE('',#9201,#9202);+#9201 = CARTESIAN_POINT('',(0.284485095796,0.));+#9202 = VECTOR('',#9203,1.);+#9203 = DIRECTION('',(0.,-1.));+#9204 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9205 = ORIENTED_EDGE('',*,*,#9206,.T.);+#9206 = EDGE_CURVE('',#9184,#9135,#9207,.T.);+#9207 = SURFACE_CURVE('',#9208,(#9212,#9219),.PCURVE_S1.);+#9208 = LINE('',#9209,#9210);+#9209 = CARTESIAN_POINT('',(-0.549820324126,0.149388020833,0.97));+#9210 = VECTOR('',#9211,1.);+#9211 = DIRECTION('',(1.,0.,0.));+#9212 = PCURVE('',#5214,#9213);+#9213 = DEFINITIONAL_REPRESENTATION('',(#9214),#9218);+#9214 = LINE('',#9215,#9216);+#9215 = CARTESIAN_POINT('',(0.,-0.1));+#9216 = VECTOR('',#9217,1.);+#9217 = DIRECTION('',(1.,0.));+#9218 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9219 = PCURVE('',#8852,#9220);+#9220 = DEFINITIONAL_REPRESENTATION('',(#9221),#9225);+#9221 = LINE('',#9222,#9223);+#9222 = CARTESIAN_POINT('',(3.753755115327E-02,0.284485095796));+#9223 = VECTOR('',#9224,1.);+#9224 = DIRECTION('',(1.,0.));+#9225 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9226 = ORIENTED_EDGE('',*,*,#9134,.F.);+#9227 = ADVANCED_FACE('',(#9228),#5188,.T.);+#9228 = FACE_BOUND('',#9229,.T.);+#9229 = EDGE_LOOP('',(#9230,#9231,#9232,#9253));+#9230 = ORIENTED_EDGE('',*,*,#5173,.F.);+#9231 = ORIENTED_EDGE('',*,*,#8864,.T.);+#9232 = ORIENTED_EDGE('',*,*,#9233,.T.);+#9233 = EDGE_CURVE('',#8837,#9184,#9234,.T.);+#9234 = SURFACE_CURVE('',#9235,(#9239,#9246),.PCURVE_S1.);+#9235 = LINE('',#9236,#9237);+#9236 = CARTESIAN_POINT('',(-0.549820324126,-0.135097074963,0.97));+#9237 = VECTOR('',#9238,1.);+#9238 = DIRECTION('',(0.,1.,0.));+#9239 = PCURVE('',#5188,#9240);+#9240 = DEFINITIONAL_REPRESENTATION('',(#9241),#9245);+#9241 = LINE('',#9242,#9243);+#9242 = CARTESIAN_POINT('',(0.,-0.1));+#9243 = VECTOR('',#9244,1.);+#9244 = DIRECTION('',(1.,0.));+#9245 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9246 = PCURVE('',#8852,#9247);+#9247 = DEFINITIONAL_REPRESENTATION('',(#9248),#9252);+#9248 = LINE('',#9249,#9250);+#9249 = CARTESIAN_POINT('',(3.753755115327E-02,0.));+#9250 = VECTOR('',#9251,1.);+#9251 = DIRECTION('',(0.,1.));+#9252 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9253 = ORIENTED_EDGE('',*,*,#9183,.F.);+#9254 = ADVANCED_FACE('',(#9255),#5443,.T.);+#9255 = FACE_BOUND('',#9256,.T.);+#9256 = EDGE_LOOP('',(#9257,#9258,#9281,#9309));+#9257 = ORIENTED_EDGE('',*,*,#5421,.T.);+#9258 = ORIENTED_EDGE('',*,*,#9259,.T.);+#9259 = EDGE_CURVE('',#5424,#9260,#9262,.T.);+#9260 = VERTEX_POINT('',#9261);+#9261 = CARTESIAN_POINT('',(-0.197691417876,0.15081711542,0.97));+#9262 = SURFACE_CURVE('',#9263,(#9267,#9274),.PCURVE_S1.);+#9263 = LINE('',#9264,#9265);+#9264 = CARTESIAN_POINT('',(-0.197691417876,0.15081711542,1.07));+#9265 = VECTOR('',#9266,1.);+#9266 = DIRECTION('',(-0.,-0.,-1.));+#9267 = PCURVE('',#5443,#9268);+#9268 = DEFINITIONAL_REPRESENTATION('',(#9269),#9273);+#9269 = LINE('',#9270,#9271);+#9270 = CARTESIAN_POINT('',(0.,0.));+#9271 = VECTOR('',#9272,1.);+#9272 = DIRECTION('',(0.,-1.));+#9273 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9274 = PCURVE('',#6400,#9275);+#9275 = DEFINITIONAL_REPRESENTATION('',(#9276),#9280);+#9276 = LINE('',#9277,#9278);+#9277 = CARTESIAN_POINT('',(1.,0.));+#9278 = VECTOR('',#9279,1.);+#9279 = DIRECTION('',(0.,-1.));+#9280 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9281 = ORIENTED_EDGE('',*,*,#9282,.T.);+#9282 = EDGE_CURVE('',#9260,#9283,#9285,.T.);+#9283 = VERTEX_POINT('',#9284);+#9284 = CARTESIAN_POINT('',(-0.159582228888,0.139670177641,0.97));+#9285 = SURFACE_CURVE('',#9286,(#9290,#9297),.PCURVE_S1.);+#9286 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9287,#9288,#9289),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9287 = CARTESIAN_POINT('',(-0.197691417876,0.15081711542,0.97));+#9288 = CARTESIAN_POINT('',(-0.179589553106,0.147101469494,0.97));+#9289 = CARTESIAN_POINT('',(-0.159582228888,0.139670177641,0.97));+#9290 = PCURVE('',#5443,#9291);+#9291 = DEFINITIONAL_REPRESENTATION('',(#9292),#9296);+#9292 = LINE('',#9293,#9294);+#9293 = CARTESIAN_POINT('',(0.,-0.1));+#9294 = VECTOR('',#9295,1.);+#9295 = DIRECTION('',(1.,0.));+#9296 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9297 = PCURVE('',#9298,#9303);+#9298 = PLANE('',#9299);+#9299 = AXIS2_PLACEMENT_3D('',#9300,#9301,#9302);+#9300 = CARTESIAN_POINT('',(-0.352414725167,-0.135097074963,0.97));+#9301 = DIRECTION('',(0.,0.,1.));+#9302 = DIRECTION('',(1.,0.,0.));+#9303 = DEFINITIONAL_REPRESENTATION('',(#9304),#9308);+#9304 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9305,#9306,#9307),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9305 = CARTESIAN_POINT('',(0.154723307292,0.285914190383));+#9306 = CARTESIAN_POINT('',(0.172825172061,0.282198544457));+#9307 = CARTESIAN_POINT('',(0.19283249628,0.274767252604));+#9308 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9309 = ORIENTED_EDGE('',*,*,#9310,.F.);+#9310 = EDGE_CURVE('',#5422,#9283,#9311,.T.);+#9311 = SURFACE_CURVE('',#9312,(#9316,#9323),.PCURVE_S1.);+#9312 = LINE('',#9313,#9314);+#9313 = CARTESIAN_POINT('',(-0.159582228888,0.139670177641,1.07));+#9314 = VECTOR('',#9315,1.);+#9315 = DIRECTION('',(-0.,-0.,-1.));+#9316 = PCURVE('',#5443,#9317);+#9317 = DEFINITIONAL_REPRESENTATION('',(#9318),#9322);+#9318 = LINE('',#9319,#9320);+#9319 = CARTESIAN_POINT('',(1.,0.));+#9320 = VECTOR('',#9321,1.);+#9321 = DIRECTION('',(0.,-1.));+#9322 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9323 = PCURVE('',#5474,#9324);+#9324 = DEFINITIONAL_REPRESENTATION('',(#9325),#9329);+#9325 = LINE('',#9326,#9327);+#9326 = CARTESIAN_POINT('',(0.,0.));+#9327 = VECTOR('',#9328,1.);+#9328 = DIRECTION('',(0.,-1.));+#9329 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9330 = ADVANCED_FACE('',(#9331),#6400,.T.);+#9331 = FACE_BOUND('',#9332,.T.);+#9332 = EDGE_LOOP('',(#9333,#9334,#9357,#9378));+#9333 = ORIENTED_EDGE('',*,*,#6382,.T.);+#9334 = ORIENTED_EDGE('',*,*,#9335,.T.);+#9335 = EDGE_CURVE('',#6347,#9336,#9338,.T.);+#9336 = VERTEX_POINT('',#9337);+#9337 = CARTESIAN_POINT('',(-0.23218023391,0.154532761347,0.97));+#9338 = SURFACE_CURVE('',#9339,(#9343,#9350),.PCURVE_S1.);+#9339 = LINE('',#9340,#9341);+#9340 = CARTESIAN_POINT('',(-0.23218023391,0.154532761347,1.07));+#9341 = VECTOR('',#9342,1.);+#9342 = DIRECTION('',(-0.,-0.,-1.));+#9343 = PCURVE('',#6400,#9344);+#9344 = DEFINITIONAL_REPRESENTATION('',(#9345),#9349);+#9345 = LINE('',#9346,#9347);+#9346 = CARTESIAN_POINT('',(0.,0.));+#9347 = VECTOR('',#9348,1.);+#9348 = DIRECTION('',(0.,-1.));+#9349 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9350 = PCURVE('',#6366,#9351);+#9351 = DEFINITIONAL_REPRESENTATION('',(#9352),#9356);+#9352 = LINE('',#9353,#9354);+#9353 = CARTESIAN_POINT('',(1.,0.));+#9354 = VECTOR('',#9355,1.);+#9355 = DIRECTION('',(0.,-1.));+#9356 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9357 = ORIENTED_EDGE('',*,*,#9358,.T.);+#9358 = EDGE_CURVE('',#9336,#9260,#9359,.T.);+#9359 = SURFACE_CURVE('',#9360,(#9364,#9371),.PCURVE_S1.);+#9360 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9361,#9362,#9363),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9361 = CARTESIAN_POINT('',(-0.23218023391,0.154532761347,0.97));+#9362 = CARTESIAN_POINT('',(-0.215793282645,0.154532761347,0.97));+#9363 = CARTESIAN_POINT('',(-0.197691417876,0.15081711542,0.97));+#9364 = PCURVE('',#6400,#9365);+#9365 = DEFINITIONAL_REPRESENTATION('',(#9366),#9370);+#9366 = LINE('',#9367,#9368);+#9367 = CARTESIAN_POINT('',(0.,-0.1));+#9368 = VECTOR('',#9369,1.);+#9369 = DIRECTION('',(1.,0.));+#9370 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9371 = PCURVE('',#9298,#9372);+#9372 = DEFINITIONAL_REPRESENTATION('',(#9373),#9377);+#9373 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9374,#9375,#9376),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9374 = CARTESIAN_POINT('',(0.120234491257,0.28962983631));+#9375 = CARTESIAN_POINT('',(0.136621442522,0.28962983631));+#9376 = CARTESIAN_POINT('',(0.154723307292,0.285914190383));+#9377 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9378 = ORIENTED_EDGE('',*,*,#9259,.F.);+#9379 = ADVANCED_FACE('',(#9380),#6366,.T.);+#9380 = FACE_BOUND('',#9381,.T.);+#9381 = EDGE_LOOP('',(#9382,#9383,#9406,#9427));+#9382 = ORIENTED_EDGE('',*,*,#6346,.T.);+#9383 = ORIENTED_EDGE('',*,*,#9384,.T.);+#9384 = EDGE_CURVE('',#6302,#9385,#9387,.T.);+#9385 = VERTEX_POINT('',#9386);+#9386 = CARTESIAN_POINT('',(-0.300300409226,0.131571974981,0.97));+#9387 = SURFACE_CURVE('',#9388,(#9392,#9399),.PCURVE_S1.);+#9388 = LINE('',#9389,#9390);+#9389 = CARTESIAN_POINT('',(-0.300300409226,0.131571974981,1.07));+#9390 = VECTOR('',#9391,1.);+#9391 = DIRECTION('',(-0.,-0.,-1.));+#9392 = PCURVE('',#6366,#9393);+#9393 = DEFINITIONAL_REPRESENTATION('',(#9394),#9398);+#9394 = LINE('',#9395,#9396);+#9395 = CARTESIAN_POINT('',(0.,0.));+#9396 = VECTOR('',#9397,1.);+#9397 = DIRECTION('',(0.,-1.));+#9398 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9399 = PCURVE('',#6327,#9400);+#9400 = DEFINITIONAL_REPRESENTATION('',(#9401),#9405);+#9401 = LINE('',#9402,#9403);+#9402 = CARTESIAN_POINT('',(1.,0.));+#9403 = VECTOR('',#9404,1.);+#9404 = DIRECTION('',(0.,-1.));+#9405 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9406 = ORIENTED_EDGE('',*,*,#9407,.T.);+#9407 = EDGE_CURVE('',#9385,#9336,#9408,.T.);+#9408 = SURFACE_CURVE('',#9409,(#9413,#9420),.PCURVE_S1.);+#9409 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9410,#9411,#9412),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9410 = CARTESIAN_POINT('',(-0.300300409226,0.131571974981,0.97));+#9411 = CARTESIAN_POINT('',(-0.274671979632,0.154532761347,0.97));+#9412 = CARTESIAN_POINT('',(-0.23218023391,0.154532761347,0.97));+#9413 = PCURVE('',#6366,#9414);+#9414 = DEFINITIONAL_REPRESENTATION('',(#9415),#9419);+#9415 = LINE('',#9416,#9417);+#9416 = CARTESIAN_POINT('',(0.,-0.1));+#9417 = VECTOR('',#9418,1.);+#9418 = DIRECTION('',(1.,0.));+#9419 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9420 = PCURVE('',#9298,#9421);+#9421 = DEFINITIONAL_REPRESENTATION('',(#9422),#9426);+#9422 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9423,#9424,#9425),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9423 = CARTESIAN_POINT('',(5.211431594122E-02,0.266669049944));+#9424 = CARTESIAN_POINT('',(7.774274553571E-02,0.28962983631));+#9425 = CARTESIAN_POINT('',(0.120234491257,0.28962983631));+#9426 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9427 = ORIENTED_EDGE('',*,*,#9335,.F.);+#9428 = ADVANCED_FACE('',(#9429),#6327,.T.);+#9429 = FACE_BOUND('',#9430,.T.);+#9430 = EDGE_LOOP('',(#9431,#9432,#9455,#9476));+#9431 = ORIENTED_EDGE('',*,*,#6301,.T.);+#9432 = ORIENTED_EDGE('',*,*,#9433,.T.);+#9433 = EDGE_CURVE('',#6266,#9434,#9436,.T.);+#9434 = VERTEX_POINT('',#9435);+#9435 = CARTESIAN_POINT('',(-0.325928838821,7.050199962798E-02,0.97));+#9436 = SURFACE_CURVE('',#9437,(#9441,#9448),.PCURVE_S1.);+#9437 = LINE('',#9438,#9439);+#9438 = CARTESIAN_POINT('',(-0.325928838821,7.050199962798E-02,1.07));+#9439 = VECTOR('',#9440,1.);+#9440 = DIRECTION('',(-0.,-0.,-1.));+#9441 = PCURVE('',#6327,#9442);+#9442 = DEFINITIONAL_REPRESENTATION('',(#9443),#9447);+#9443 = LINE('',#9444,#9445);+#9444 = CARTESIAN_POINT('',(0.,0.));+#9445 = VECTOR('',#9446,1.);+#9446 = DIRECTION('',(0.,-1.));+#9447 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9448 = PCURVE('',#6285,#9449);+#9449 = DEFINITIONAL_REPRESENTATION('',(#9450),#9454);+#9450 = LINE('',#9451,#9452);+#9451 = CARTESIAN_POINT('',(1.,0.));+#9452 = VECTOR('',#9453,1.);+#9453 = DIRECTION('',(0.,-1.));+#9454 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9455 = ORIENTED_EDGE('',*,*,#9456,.T.);+#9456 = EDGE_CURVE('',#9434,#9385,#9457,.T.);+#9457 = SURFACE_CURVE('',#9458,(#9462,#9469),.PCURVE_S1.);+#9458 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9459,#9460,#9461),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9459 = CARTESIAN_POINT('',(-0.325928838821,7.050199962798E-02,0.97));+#9460 = CARTESIAN_POINT('',(-0.325928838821,0.108611188616,0.97));+#9461 = CARTESIAN_POINT('',(-0.300300409226,0.131571974981,0.97));+#9462 = PCURVE('',#6327,#9463);+#9463 = DEFINITIONAL_REPRESENTATION('',(#9464),#9468);+#9464 = LINE('',#9465,#9466);+#9465 = CARTESIAN_POINT('',(0.,-0.1));+#9466 = VECTOR('',#9467,1.);+#9467 = DIRECTION('',(1.,0.));+#9468 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9469 = PCURVE('',#9298,#9470);+#9470 = DEFINITIONAL_REPRESENTATION('',(#9471),#9475);+#9471 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9472,#9473,#9474),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9472 = CARTESIAN_POINT('',(2.648588634673E-02,0.205599074591));+#9473 = CARTESIAN_POINT('',(2.648588634673E-02,0.243708263579));+#9474 = CARTESIAN_POINT('',(5.211431594122E-02,0.266669049944));+#9475 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9476 = ORIENTED_EDGE('',*,*,#9384,.F.);+#9477 = ADVANCED_FACE('',(#9478),#6285,.T.);+#9478 = FACE_BOUND('',#9479,.T.);+#9479 = EDGE_LOOP('',(#9480,#9481,#9504,#9525));+#9480 = ORIENTED_EDGE('',*,*,#6265,.T.);+#9481 = ORIENTED_EDGE('',*,*,#9482,.T.);+#9482 = EDGE_CURVE('',#6230,#9483,#9485,.T.);+#9483 = VERTEX_POINT('',#9484);+#9484 = CARTESIAN_POINT('',(-0.308017519996,2.191278366815E-02,0.97));+#9485 = SURFACE_CURVE('',#9486,(#9490,#9497),.PCURVE_S1.);+#9486 = LINE('',#9487,#9488);+#9487 = CARTESIAN_POINT('',(-0.308017519996,2.191278366815E-02,1.07));+#9488 = VECTOR('',#9489,1.);+#9489 = DIRECTION('',(-0.,-0.,-1.));+#9490 = PCURVE('',#6285,#9491);+#9491 = DEFINITIONAL_REPRESENTATION('',(#9492),#9496);+#9492 = LINE('',#9493,#9494);+#9493 = CARTESIAN_POINT('',(0.,0.));+#9494 = VECTOR('',#9495,1.);+#9495 = DIRECTION('',(0.,-1.));+#9496 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9497 = PCURVE('',#6249,#9498);+#9498 = DEFINITIONAL_REPRESENTATION('',(#9499),#9503);+#9499 = LINE('',#9500,#9501);+#9500 = CARTESIAN_POINT('',(1.,0.));+#9501 = VECTOR('',#9502,1.);+#9502 = DIRECTION('',(0.,-1.));+#9503 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9504 = ORIENTED_EDGE('',*,*,#9505,.T.);+#9505 = EDGE_CURVE('',#9483,#9434,#9506,.T.);+#9506 = SURFACE_CURVE('',#9507,(#9511,#9518),.PCURVE_S1.);+#9507 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9508,#9509,#9510),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9508 = CARTESIAN_POINT('',(-0.308017519996,2.191278366815E-02,0.97));+#9509 = CARTESIAN_POINT('',(-0.325928838821,4.00146484375E-02,0.97));+#9510 = CARTESIAN_POINT('',(-0.325928838821,7.050199962798E-02,0.97));+#9511 = PCURVE('',#6285,#9512);+#9512 = DEFINITIONAL_REPRESENTATION('',(#9513),#9517);+#9513 = LINE('',#9514,#9515);+#9514 = CARTESIAN_POINT('',(0.,-0.1));+#9515 = VECTOR('',#9516,1.);+#9516 = DIRECTION('',(1.,0.));+#9517 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9518 = PCURVE('',#9298,#9519);+#9519 = DEFINITIONAL_REPRESENTATION('',(#9520),#9524);+#9520 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9521,#9522,#9523),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9521 = CARTESIAN_POINT('',(4.439720517113E-02,0.157009858631));+#9522 = CARTESIAN_POINT('',(2.648588634673E-02,0.1751117234));+#9523 = CARTESIAN_POINT('',(2.648588634673E-02,0.205599074591));+#9524 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9525 = ORIENTED_EDGE('',*,*,#9433,.F.);+#9526 = ADVANCED_FACE('',(#9527),#6249,.T.);+#9527 = FACE_BOUND('',#9528,.T.);+#9528 = EDGE_LOOP('',(#9529,#9530,#9553,#9574));+#9529 = ORIENTED_EDGE('',*,*,#6229,.T.);+#9530 = ORIENTED_EDGE('',*,*,#9531,.T.);+#9531 = EDGE_CURVE('',#6204,#9532,#9534,.T.);+#9532 = VERTEX_POINT('',#9533);+#9533 = CARTESIAN_POINT('',(-0.250472644624,-5.144740513393E-03,0.97));+#9534 = SURFACE_CURVE('',#9535,(#9539,#9546),.PCURVE_S1.);+#9535 = LINE('',#9536,#9537);+#9536 = CARTESIAN_POINT('',(-0.250472644624,-5.144740513393E-03,1.07));+#9537 = VECTOR('',#9538,1.);+#9538 = DIRECTION('',(-0.,-0.,-1.));+#9539 = PCURVE('',#6249,#9540);+#9540 = DEFINITIONAL_REPRESENTATION('',(#9541),#9545);+#9541 = LINE('',#9542,#9543);+#9542 = CARTESIAN_POINT('',(0.,0.));+#9543 = VECTOR('',#9544,1.);+#9544 = DIRECTION('',(0.,-1.));+#9545 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9546 = PCURVE('',#6218,#9547);+#9547 = DEFINITIONAL_REPRESENTATION('',(#9548),#9552);+#9548 = LINE('',#9549,#9550);+#9549 = CARTESIAN_POINT('',(2.112311594937E-02,0.));+#9550 = VECTOR('',#9551,1.);+#9551 = DIRECTION('',(0.,-1.));+#9552 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9553 = ORIENTED_EDGE('',*,*,#9554,.T.);+#9554 = EDGE_CURVE('',#9532,#9483,#9555,.T.);+#9555 = SURFACE_CURVE('',#9556,(#9560,#9567),.PCURVE_S1.);+#9556 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9557,#9558,#9559),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9557 = CARTESIAN_POINT('',(-0.250472644624,-5.144740513393E-03,0.97));+#9558 = CARTESIAN_POINT('',(-0.290106201172,3.810918898809E-03,0.97));+#9559 = CARTESIAN_POINT('',(-0.308017519996,2.191278366815E-02,0.97));+#9560 = PCURVE('',#6249,#9561);+#9561 = DEFINITIONAL_REPRESENTATION('',(#9562),#9566);+#9562 = LINE('',#9563,#9564);+#9563 = CARTESIAN_POINT('',(0.,-0.1));+#9564 = VECTOR('',#9565,1.);+#9565 = DIRECTION('',(1.,0.));+#9566 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9567 = PCURVE('',#9298,#9568);+#9568 = DEFINITIONAL_REPRESENTATION('',(#9569),#9573);+#9569 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9570,#9571,#9572),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9570 = CARTESIAN_POINT('',(0.101942080543,0.129952334449));+#9571 = CARTESIAN_POINT('',(6.230852399554E-02,0.138907993862));+#9572 = CARTESIAN_POINT('',(4.439720517113E-02,0.157009858631));+#9573 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9574 = ORIENTED_EDGE('',*,*,#9482,.F.);+#9575 = ADVANCED_FACE('',(#9576),#6218,.T.);+#9576 = FACE_BOUND('',#9577,.T.);+#9577 = EDGE_LOOP('',(#9578,#9579,#9602,#9623));+#9578 = ORIENTED_EDGE('',*,*,#6203,.F.);+#9579 = ORIENTED_EDGE('',*,*,#9580,.T.);+#9580 = EDGE_CURVE('',#6168,#9581,#9583,.T.);+#9581 = VERTEX_POINT('',#9582);+#9582 = CARTESIAN_POINT('',(-0.229893682571,-9.908389136905E-03,0.97));+#9583 = SURFACE_CURVE('',#9584,(#9588,#9595),.PCURVE_S1.);+#9584 = LINE('',#9585,#9586);+#9585 = CARTESIAN_POINT('',(-0.229893682571,-9.908389136905E-03,1.07));+#9586 = VECTOR('',#9587,1.);+#9587 = DIRECTION('',(-0.,-0.,-1.));+#9588 = PCURVE('',#6218,#9589);+#9589 = DEFINITIONAL_REPRESENTATION('',(#9590),#9594);+#9590 = LINE('',#9591,#9592);+#9591 = CARTESIAN_POINT('',(0.,0.));+#9592 = VECTOR('',#9593,1.);+#9593 = DIRECTION('',(0.,-1.));+#9594 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9595 = PCURVE('',#6187,#9596);+#9596 = DEFINITIONAL_REPRESENTATION('',(#9597),#9601);+#9597 = LINE('',#9598,#9599);+#9598 = CARTESIAN_POINT('',(1.,0.));+#9599 = VECTOR('',#9600,1.);+#9600 = DIRECTION('',(0.,-1.));+#9601 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9602 = ORIENTED_EDGE('',*,*,#9603,.T.);+#9603 = EDGE_CURVE('',#9581,#9532,#9604,.T.);+#9604 = SURFACE_CURVE('',#9605,(#9609,#9616),.PCURVE_S1.);+#9605 = LINE('',#9606,#9607);+#9606 = CARTESIAN_POINT('',(-0.229893682571,-9.908389136905E-03,0.97));+#9607 = VECTOR('',#9608,1.);+#9608 = DIRECTION('',(-0.97423893818,0.225518272727,0.));+#9609 = PCURVE('',#6218,#9610);+#9610 = DEFINITIONAL_REPRESENTATION('',(#9611),#9615);+#9611 = LINE('',#9612,#9613);+#9612 = CARTESIAN_POINT('',(0.,-0.1));+#9613 = VECTOR('',#9614,1.);+#9614 = DIRECTION('',(1.,0.));+#9615 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9616 = PCURVE('',#9298,#9617);+#9617 = DEFINITIONAL_REPRESENTATION('',(#9618),#9622);+#9618 = LINE('',#9619,#9620);+#9619 = CARTESIAN_POINT('',(0.122521042597,0.125188685826));+#9620 = VECTOR('',#9621,1.);+#9621 = DIRECTION('',(-0.97423893818,0.225518272727));+#9622 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9623 = ORIENTED_EDGE('',*,*,#9531,.F.);+#9624 = ADVANCED_FACE('',(#9625),#6187,.T.);+#9625 = FACE_BOUND('',#9626,.T.);+#9626 = EDGE_LOOP('',(#9627,#9628,#9651,#9672));+#9627 = ORIENTED_EDGE('',*,*,#6167,.T.);+#9628 = ORIENTED_EDGE('',*,*,#9629,.T.);+#9629 = EDGE_CURVE('',#6132,#9630,#9632,.T.);+#9630 = VERTEX_POINT('',#9631);+#9631 = CARTESIAN_POINT('',(-0.191117582775,-2.724807012649E-02,0.97));+#9632 = SURFACE_CURVE('',#9633,(#9637,#9644),.PCURVE_S1.);+#9633 = LINE('',#9634,#9635);+#9634 = CARTESIAN_POINT('',(-0.191117582775,-2.724807012649E-02,1.07));+#9635 = VECTOR('',#9636,1.);+#9636 = DIRECTION('',(-0.,-0.,-1.));+#9637 = PCURVE('',#6187,#9638);+#9638 = DEFINITIONAL_REPRESENTATION('',(#9639),#9643);+#9639 = LINE('',#9640,#9641);+#9640 = CARTESIAN_POINT('',(0.,0.));+#9641 = VECTOR('',#9642,1.);+#9642 = DIRECTION('',(0.,-1.));+#9643 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9644 = PCURVE('',#6151,#9645);+#9645 = DEFINITIONAL_REPRESENTATION('',(#9646),#9650);+#9646 = LINE('',#9647,#9648);+#9647 = CARTESIAN_POINT('',(1.,0.));+#9648 = VECTOR('',#9649,1.);+#9649 = DIRECTION('',(0.,-1.));+#9650 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9651 = ORIENTED_EDGE('',*,*,#9652,.T.);+#9652 = EDGE_CURVE('',#9630,#9581,#9653,.T.);+#9653 = SURFACE_CURVE('',#9654,(#9658,#9665),.PCURVE_S1.);+#9654 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9655,#9656,#9657),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9655 = CARTESIAN_POINT('',(-0.191117582775,-2.724807012649E-02,0.97));+#9656 = CARTESIAN_POINT('',(-0.202264520554,-1.6005859375E-02,0.97));+#9657 = CARTESIAN_POINT('',(-0.229893682571,-9.908389136905E-03,0.97));+#9658 = PCURVE('',#6187,#9659);+#9659 = DEFINITIONAL_REPRESENTATION('',(#9660),#9664);+#9660 = LINE('',#9661,#9662);+#9661 = CARTESIAN_POINT('',(0.,-0.1));+#9662 = VECTOR('',#9663,1.);+#9663 = DIRECTION('',(1.,0.));+#9664 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9665 = PCURVE('',#9298,#9666);+#9666 = DEFINITIONAL_REPRESENTATION('',(#9667),#9671);+#9667 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9668,#9669,#9670),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9668 = CARTESIAN_POINT('',(0.161297142392,0.107849004836));+#9669 = CARTESIAN_POINT('',(0.150150204613,0.119091215588));+#9670 = CARTESIAN_POINT('',(0.122521042597,0.125188685826));+#9671 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9672 = ORIENTED_EDGE('',*,*,#9580,.F.);+#9673 = ADVANCED_FACE('',(#9674),#6151,.T.);+#9674 = FACE_BOUND('',#9675,.T.);+#9675 = EDGE_LOOP('',(#9676,#9677,#9700,#9721));+#9676 = ORIENTED_EDGE('',*,*,#6131,.T.);+#9677 = ORIENTED_EDGE('',*,*,#9678,.T.);+#9678 = EDGE_CURVE('',#6096,#9679,#9681,.T.);+#9679 = VERTEX_POINT('',#9680);+#9680 = CARTESIAN_POINT('',(-0.179970644996,-5.983142671131E-02,0.97));+#9681 = SURFACE_CURVE('',#9682,(#9686,#9693),.PCURVE_S1.);+#9682 = LINE('',#9683,#9684);+#9683 = CARTESIAN_POINT('',(-0.179970644996,-5.983142671131E-02,1.07));+#9684 = VECTOR('',#9685,1.);+#9685 = DIRECTION('',(-0.,-0.,-1.));+#9686 = PCURVE('',#6151,#9687);+#9687 = DEFINITIONAL_REPRESENTATION('',(#9688),#9692);+#9688 = LINE('',#9689,#9690);+#9689 = CARTESIAN_POINT('',(0.,0.));+#9690 = VECTOR('',#9691,1.);+#9691 = DIRECTION('',(0.,-1.));+#9692 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9693 = PCURVE('',#6115,#9694);+#9694 = DEFINITIONAL_REPRESENTATION('',(#9695),#9699);+#9695 = LINE('',#9696,#9697);+#9696 = CARTESIAN_POINT('',(1.,0.));+#9697 = VECTOR('',#9698,1.);+#9698 = DIRECTION('',(0.,-1.));+#9699 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9700 = ORIENTED_EDGE('',*,*,#9701,.T.);+#9701 = EDGE_CURVE('',#9679,#9630,#9702,.T.);+#9702 = SURFACE_CURVE('',#9703,(#9707,#9714),.PCURVE_S1.);+#9703 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9704,#9705,#9706),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9704 = CARTESIAN_POINT('',(-0.179970644996,-5.983142671131E-02,0.97));+#9705 = CARTESIAN_POINT('',(-0.179970644996,-3.849028087798E-02,0.97));+#9706 = CARTESIAN_POINT('',(-0.191117582775,-2.724807012649E-02,0.97));+#9707 = PCURVE('',#6151,#9708);+#9708 = DEFINITIONAL_REPRESENTATION('',(#9709),#9713);+#9709 = LINE('',#9710,#9711);+#9710 = CARTESIAN_POINT('',(0.,-0.1));+#9711 = VECTOR('',#9712,1.);+#9712 = DIRECTION('',(1.,0.));+#9713 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9714 = PCURVE('',#9298,#9715);+#9715 = DEFINITIONAL_REPRESENTATION('',(#9716),#9720);+#9716 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9717,#9718,#9719),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9717 = CARTESIAN_POINT('',(0.172444080171,7.526564825149E-02));+#9718 = CARTESIAN_POINT('',(0.172444080171,9.660679408482E-02));+#9719 = CARTESIAN_POINT('',(0.161297142392,0.107849004836));+#9720 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9721 = ORIENTED_EDGE('',*,*,#9629,.F.);+#9722 = ADVANCED_FACE('',(#9723),#6115,.T.);+#9723 = FACE_BOUND('',#9724,.T.);+#9724 = EDGE_LOOP('',(#9725,#9726,#9749,#9770));+#9725 = ORIENTED_EDGE('',*,*,#6095,.T.);+#9726 = ORIENTED_EDGE('',*,*,#9727,.T.);+#9727 = EDGE_CURVE('',#6060,#9728,#9730,.T.);+#9728 = VERTEX_POINT('',#9729);+#9729 = CARTESIAN_POINT('',(-0.196167050316,-9.632097516741E-02,0.97));+#9730 = SURFACE_CURVE('',#9731,(#9735,#9742),.PCURVE_S1.);+#9731 = LINE('',#9732,#9733);+#9732 = CARTESIAN_POINT('',(-0.196167050316,-9.632097516741E-02,1.07));+#9733 = VECTOR('',#9734,1.);+#9734 = DIRECTION('',(-0.,-0.,-1.));+#9735 = PCURVE('',#6115,#9736);+#9736 = DEFINITIONAL_REPRESENTATION('',(#9737),#9741);+#9737 = LINE('',#9738,#9739);+#9738 = CARTESIAN_POINT('',(0.,0.));+#9739 = VECTOR('',#9740,1.);+#9740 = DIRECTION('',(0.,-1.));+#9741 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9742 = PCURVE('',#6079,#9743);+#9743 = DEFINITIONAL_REPRESENTATION('',(#9744),#9748);+#9744 = LINE('',#9745,#9746);+#9745 = CARTESIAN_POINT('',(1.,0.));+#9746 = VECTOR('',#9747,1.);+#9747 = DIRECTION('',(0.,-1.));+#9748 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9749 = ORIENTED_EDGE('',*,*,#9750,.T.);+#9750 = EDGE_CURVE('',#9728,#9679,#9751,.T.);+#9751 = SURFACE_CURVE('',#9752,(#9756,#9763),.PCURVE_S1.);+#9752 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9753,#9754,#9755),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9753 = CARTESIAN_POINT('',(-0.196167050316,-9.632097516741E-02,0.97));+#9754 = CARTESIAN_POINT('',(-0.179970644996,-8.326857793899E-02,0.97));+#9755 = CARTESIAN_POINT('',(-0.179970644996,-5.983142671131E-02,0.97));+#9756 = PCURVE('',#6115,#9757);+#9757 = DEFINITIONAL_REPRESENTATION('',(#9758),#9762);+#9758 = LINE('',#9759,#9760);+#9759 = CARTESIAN_POINT('',(0.,-0.1));+#9760 = VECTOR('',#9761,1.);+#9761 = DIRECTION('',(1.,0.));+#9762 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9763 = PCURVE('',#9298,#9764);+#9764 = DEFINITIONAL_REPRESENTATION('',(#9765),#9769);+#9765 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9766,#9767,#9768),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9766 = CARTESIAN_POINT('',(0.156247674851,3.877609979539E-02));+#9767 = CARTESIAN_POINT('',(0.172444080171,5.182849702381E-02));+#9768 = CARTESIAN_POINT('',(0.172444080171,7.526564825149E-02));+#9769 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9770 = ORIENTED_EDGE('',*,*,#9678,.F.);+#9771 = ADVANCED_FACE('',(#9772),#6079,.T.);+#9772 = FACE_BOUND('',#9773,.T.);+#9773 = EDGE_LOOP('',(#9774,#9775,#9798,#9819));+#9774 = ORIENTED_EDGE('',*,*,#6059,.T.);+#9775 = ORIENTED_EDGE('',*,*,#9776,.T.);+#9776 = EDGE_CURVE('',#6024,#9777,#9779,.T.);+#9777 = VERTEX_POINT('',#9778);+#9778 = CARTESIAN_POINT('',(-0.241516985212,-0.109373372396,0.97));+#9779 = SURFACE_CURVE('',#9780,(#9784,#9791),.PCURVE_S1.);+#9780 = LINE('',#9781,#9782);+#9781 = CARTESIAN_POINT('',(-0.241516985212,-0.109373372396,1.07));+#9782 = VECTOR('',#9783,1.);+#9783 = DIRECTION('',(-0.,-0.,-1.));+#9784 = PCURVE('',#6079,#9785);+#9785 = DEFINITIONAL_REPRESENTATION('',(#9786),#9790);+#9786 = LINE('',#9787,#9788);+#9787 = CARTESIAN_POINT('',(0.,0.));+#9788 = VECTOR('',#9789,1.);+#9789 = DIRECTION('',(0.,-1.));+#9790 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9791 = PCURVE('',#6043,#9792);+#9792 = DEFINITIONAL_REPRESENTATION('',(#9793),#9797);+#9793 = LINE('',#9794,#9795);+#9794 = CARTESIAN_POINT('',(1.,0.));+#9795 = VECTOR('',#9796,1.);+#9796 = DIRECTION('',(0.,-1.));+#9797 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9798 = ORIENTED_EDGE('',*,*,#9799,.T.);+#9799 = EDGE_CURVE('',#9777,#9728,#9800,.T.);+#9800 = SURFACE_CURVE('',#9801,(#9805,#9812),.PCURVE_S1.);+#9801 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9802,#9803,#9804),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9802 = CARTESIAN_POINT('',(-0.241516985212,-0.109373372396,0.97));+#9803 = CARTESIAN_POINT('',(-0.212363455636,-0.109373372396,0.97));+#9804 = CARTESIAN_POINT('',(-0.196167050316,-9.632097516741E-02,0.97));+#9805 = PCURVE('',#6079,#9806);+#9806 = DEFINITIONAL_REPRESENTATION('',(#9807),#9811);+#9807 = LINE('',#9808,#9809);+#9808 = CARTESIAN_POINT('',(0.,-0.1));+#9809 = VECTOR('',#9810,1.);+#9810 = DIRECTION('',(1.,0.));+#9811 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9812 = PCURVE('',#9298,#9813);+#9813 = DEFINITIONAL_REPRESENTATION('',(#9814),#9818);+#9814 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9815,#9816,#9817),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9815 = CARTESIAN_POINT('',(0.110897739955,2.572370256696E-02));+#9816 = CARTESIAN_POINT('',(0.140051269531,2.572370256696E-02));+#9817 = CARTESIAN_POINT('',(0.156247674851,3.877609979539E-02));+#9818 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9819 = ORIENTED_EDGE('',*,*,#9727,.F.);+#9820 = ADVANCED_FACE('',(#9821),#6043,.T.);+#9821 = FACE_BOUND('',#9822,.T.);+#9822 = EDGE_LOOP('',(#9823,#9824,#9847,#9868));+#9823 = ORIENTED_EDGE('',*,*,#6023,.T.);+#9824 = ORIENTED_EDGE('',*,*,#9825,.T.);+#9825 = EDGE_CURVE('',#5988,#9826,#9828,.T.);+#9826 = VERTEX_POINT('',#9827);+#9827 = CARTESIAN_POINT('',(-0.280864722842,-0.102894810268,0.97));+#9828 = SURFACE_CURVE('',#9829,(#9833,#9840),.PCURVE_S1.);+#9829 = LINE('',#9830,#9831);+#9830 = CARTESIAN_POINT('',(-0.280864722842,-0.102894810268,1.07));+#9831 = VECTOR('',#9832,1.);+#9832 = DIRECTION('',(-0.,-0.,-1.));+#9833 = PCURVE('',#6043,#9834);+#9834 = DEFINITIONAL_REPRESENTATION('',(#9835),#9839);+#9835 = LINE('',#9836,#9837);+#9836 = CARTESIAN_POINT('',(0.,0.));+#9837 = VECTOR('',#9838,1.);+#9838 = DIRECTION('',(0.,-1.));+#9839 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9840 = PCURVE('',#6007,#9841);+#9841 = DEFINITIONAL_REPRESENTATION('',(#9842),#9846);+#9842 = LINE('',#9843,#9844);+#9843 = CARTESIAN_POINT('',(1.,0.));+#9844 = VECTOR('',#9845,1.);+#9845 = DIRECTION('',(0.,-1.));+#9846 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9847 = ORIENTED_EDGE('',*,*,#9848,.T.);+#9848 = EDGE_CURVE('',#9826,#9777,#9849,.T.);+#9849 = SURFACE_CURVE('',#9850,(#9854,#9861),.PCURVE_S1.);+#9850 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9851,#9852,#9853),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9851 = CARTESIAN_POINT('',(-0.280864722842,-0.102894810268,0.97));+#9852 = CARTESIAN_POINT('',(-0.261333763486,-0.109373372396,0.97));+#9853 = CARTESIAN_POINT('',(-0.241516985212,-0.109373372396,0.97));+#9854 = PCURVE('',#6043,#9855);+#9855 = DEFINITIONAL_REPRESENTATION('',(#9856),#9860);+#9856 = LINE('',#9857,#9858);+#9857 = CARTESIAN_POINT('',(0.,-0.1));+#9858 = VECTOR('',#9859,1.);+#9859 = DIRECTION('',(1.,0.));+#9860 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9861 = PCURVE('',#9298,#9862);+#9862 = DEFINITIONAL_REPRESENTATION('',(#9863),#9867);+#9863 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9864,#9865,#9866),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9864 = CARTESIAN_POINT('',(7.155000232515E-02,3.220226469494E-02));+#9865 = CARTESIAN_POINT('',(9.108096168155E-02,2.572370256696E-02));+#9866 = CARTESIAN_POINT('',(0.110897739955,2.572370256696E-02));+#9867 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9868 = ORIENTED_EDGE('',*,*,#9776,.F.);+#9869 = ADVANCED_FACE('',(#9870),#6007,.T.);+#9870 = FACE_BOUND('',#9871,.T.);+#9871 = EDGE_LOOP('',(#9872,#9873,#9896,#9917));+#9872 = ORIENTED_EDGE('',*,*,#5987,.T.);+#9873 = ORIENTED_EDGE('',*,*,#9874,.T.);+#9874 = EDGE_CURVE('',#5962,#9875,#9877,.T.);+#9875 = VERTEX_POINT('',#9876);+#9876 = CARTESIAN_POINT('',(-0.322308465867,-8.250639415923E-02,0.97));+#9877 = SURFACE_CURVE('',#9878,(#9882,#9889),.PCURVE_S1.);+#9878 = LINE('',#9879,#9880);+#9879 = CARTESIAN_POINT('',(-0.322308465867,-8.250639415923E-02,1.07));+#9880 = VECTOR('',#9881,1.);+#9881 = DIRECTION('',(-0.,-0.,-1.));+#9882 = PCURVE('',#6007,#9883);+#9883 = DEFINITIONAL_REPRESENTATION('',(#9884),#9888);+#9884 = LINE('',#9885,#9886);+#9885 = CARTESIAN_POINT('',(0.,0.));+#9886 = VECTOR('',#9887,1.);+#9887 = DIRECTION('',(0.,-1.));+#9888 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9889 = PCURVE('',#5976,#9890);+#9890 = DEFINITIONAL_REPRESENTATION('',(#9891),#9895);+#9891 = LINE('',#9892,#9893);+#9892 = CARTESIAN_POINT('',(4.09673781622E-02,0.));+#9893 = VECTOR('',#9894,1.);+#9894 = DIRECTION('',(0.,-1.));+#9895 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9896 = ORIENTED_EDGE('',*,*,#9897,.T.);+#9897 = EDGE_CURVE('',#9875,#9826,#9898,.T.);+#9898 = SURFACE_CURVE('',#9899,(#9903,#9910),.PCURVE_S1.);+#9899 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9900,#9901,#9902),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9900 = CARTESIAN_POINT('',(-0.322308465867,-8.250639415923E-02,0.97));+#9901 = CARTESIAN_POINT('',(-0.300395682199,-9.641624813988E-02,0.97));+#9902 = CARTESIAN_POINT('',(-0.280864722842,-0.102894810268,0.97));+#9903 = PCURVE('',#6007,#9904);+#9904 = DEFINITIONAL_REPRESENTATION('',(#9905),#9909);+#9905 = LINE('',#9906,#9907);+#9906 = CARTESIAN_POINT('',(0.,-0.1));+#9907 = VECTOR('',#9908,1.);+#9908 = DIRECTION('',(1.,0.));+#9909 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9910 = PCURVE('',#9298,#9911);+#9911 = DEFINITIONAL_REPRESENTATION('',(#9912),#9916);+#9912 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9913,#9914,#9915),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9913 = CARTESIAN_POINT('',(3.01062593006E-02,5.259068080357E-02));+#9914 = CARTESIAN_POINT('',(5.201904296875E-02,3.868082682292E-02));+#9915 = CARTESIAN_POINT('',(7.155000232515E-02,3.220226469494E-02));+#9916 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9917 = ORIENTED_EDGE('',*,*,#9825,.F.);+#9918 = ADVANCED_FACE('',(#9919),#5976,.T.);+#9919 = FACE_BOUND('',#9920,.T.);+#9920 = EDGE_LOOP('',(#9921,#9922,#9945,#9966));+#9921 = ORIENTED_EDGE('',*,*,#5961,.F.);+#9922 = ORIENTED_EDGE('',*,*,#9923,.T.);+#9923 = EDGE_CURVE('',#5926,#9924,#9926,.T.);+#9924 = VERTEX_POINT('',#9925);+#9925 = CARTESIAN_POINT('',(-0.322308465867,-0.123473772321,0.97));+#9926 = SURFACE_CURVE('',#9927,(#9931,#9938),.PCURVE_S1.);+#9927 = LINE('',#9928,#9929);+#9928 = CARTESIAN_POINT('',(-0.322308465867,-0.123473772321,1.07));+#9929 = VECTOR('',#9930,1.);+#9930 = DIRECTION('',(-0.,-0.,-1.));+#9931 = PCURVE('',#5976,#9932);+#9932 = DEFINITIONAL_REPRESENTATION('',(#9933),#9937);+#9933 = LINE('',#9934,#9935);+#9934 = CARTESIAN_POINT('',(0.,0.));+#9935 = VECTOR('',#9936,1.);+#9936 = DIRECTION('',(0.,-1.));+#9937 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9938 = PCURVE('',#5945,#9939);+#9939 = DEFINITIONAL_REPRESENTATION('',(#9940),#9944);+#9940 = LINE('',#9941,#9942);+#9941 = CARTESIAN_POINT('',(1.,0.));+#9942 = VECTOR('',#9943,1.);+#9943 = DIRECTION('',(0.,-1.));+#9944 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9945 = ORIENTED_EDGE('',*,*,#9946,.T.);+#9946 = EDGE_CURVE('',#9924,#9875,#9947,.T.);+#9947 = SURFACE_CURVE('',#9948,(#9952,#9959),.PCURVE_S1.);+#9948 = LINE('',#9949,#9950);+#9949 = CARTESIAN_POINT('',(-0.322308465867,-0.123473772321,0.97));+#9950 = VECTOR('',#9951,1.);+#9951 = DIRECTION('',(0.,1.,0.));+#9952 = PCURVE('',#5976,#9953);+#9953 = DEFINITIONAL_REPRESENTATION('',(#9954),#9958);+#9954 = LINE('',#9955,#9956);+#9955 = CARTESIAN_POINT('',(0.,-0.1));+#9956 = VECTOR('',#9957,1.);+#9957 = DIRECTION('',(1.,0.));+#9958 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9959 = PCURVE('',#9298,#9960);+#9960 = DEFINITIONAL_REPRESENTATION('',(#9961),#9965);+#9961 = LINE('',#9962,#9963);+#9962 = CARTESIAN_POINT('',(3.01062593006E-02,1.162330264137E-02));+#9963 = VECTOR('',#9964,1.);+#9964 = DIRECTION('',(0.,1.));+#9965 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9966 = ORIENTED_EDGE('',*,*,#9874,.F.);+#9967 = ADVANCED_FACE('',(#9968),#5945,.T.);+#9968 = FACE_BOUND('',#9969,.T.);+#9969 = EDGE_LOOP('',(#9970,#9971,#9994,#10015));+#9970 = ORIENTED_EDGE('',*,*,#5925,.T.);+#9971 = ORIENTED_EDGE('',*,*,#9972,.T.);+#9972 = EDGE_CURVE('',#5890,#9973,#9975,.T.);+#9973 = VERTEX_POINT('',#9974);+#9974 = CARTESIAN_POINT('',(-0.281722179594,-0.136335623605,0.97));+#9975 = SURFACE_CURVE('',#9976,(#9980,#9987),.PCURVE_S1.);+#9976 = LINE('',#9977,#9978);+#9977 = CARTESIAN_POINT('',(-0.281722179594,-0.136335623605,1.07));+#9978 = VECTOR('',#9979,1.);+#9979 = DIRECTION('',(-0.,-0.,-1.));+#9980 = PCURVE('',#5945,#9981);+#9981 = DEFINITIONAL_REPRESENTATION('',(#9982),#9986);+#9982 = LINE('',#9983,#9984);+#9983 = CARTESIAN_POINT('',(0.,0.));+#9984 = VECTOR('',#9985,1.);+#9985 = DIRECTION('',(0.,-1.));+#9986 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9987 = PCURVE('',#5909,#9988);+#9988 = DEFINITIONAL_REPRESENTATION('',(#9989),#9993);+#9989 = LINE('',#9990,#9991);+#9990 = CARTESIAN_POINT('',(1.,0.));+#9991 = VECTOR('',#9992,1.);+#9992 = DIRECTION('',(0.,-1.));+#9993 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9994 = ORIENTED_EDGE('',*,*,#9995,.T.);+#9995 = EDGE_CURVE('',#9973,#9924,#9996,.T.);+#9996 = SURFACE_CURVE('',#9997,(#10001,#10008),.PCURVE_S1.);+#9997 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9998,#9999,#10000),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9998 = CARTESIAN_POINT('',(-0.281722179594,-0.136335623605,0.97));+#9999 = CARTESIAN_POINT('',(-0.301920049758,-0.132048339844,0.97));+#10000 = CARTESIAN_POINT('',(-0.322308465867,-0.123473772321,0.97));+#10001 = PCURVE('',#5945,#10002);+#10002 = DEFINITIONAL_REPRESENTATION('',(#10003),#10007);+#10003 = LINE('',#10004,#10005);+#10004 = CARTESIAN_POINT('',(0.,-0.1));+#10005 = VECTOR('',#10006,1.);+#10006 = DIRECTION('',(1.,0.));+#10007 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10008 = PCURVE('',#9298,#10009);+#10009 = DEFINITIONAL_REPRESENTATION('',(#10010),#10014);+#10010 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10011,#10012,#10013),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10011 = CARTESIAN_POINT('',(7.069254557292E-02,-1.238548642113E-03));+#10012 = CARTESIAN_POINT('',(5.049467540923E-02,3.048735119048E-03));+#10013 = CARTESIAN_POINT('',(3.01062593006E-02,1.162330264137E-02));+#10014 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10015 = ORIENTED_EDGE('',*,*,#9923,.F.);+#10016 = ADVANCED_FACE('',(#10017),#5909,.T.);+#10017 = FACE_BOUND('',#10018,.T.);+#10018 = EDGE_LOOP('',(#10019,#10020,#10043,#10064));+#10019 = ORIENTED_EDGE('',*,*,#5889,.T.);+#10020 = ORIENTED_EDGE('',*,*,#10021,.T.);+#10021 = EDGE_CURVE('',#5854,#10022,#10024,.T.);+#10022 = VERTEX_POINT('',#10023);+#10023 = CARTESIAN_POINT('',(-0.241516985212,-0.140622907366,0.97));+#10024 = SURFACE_CURVE('',#10025,(#10029,#10036),.PCURVE_S1.);+#10025 = LINE('',#10026,#10027);+#10026 = CARTESIAN_POINT('',(-0.241516985212,-0.140622907366,1.07));+#10027 = VECTOR('',#10028,1.);+#10028 = DIRECTION('',(-0.,-0.,-1.));+#10029 = PCURVE('',#5909,#10030);+#10030 = DEFINITIONAL_REPRESENTATION('',(#10031),#10035);+#10031 = LINE('',#10032,#10033);+#10032 = CARTESIAN_POINT('',(0.,0.));+#10033 = VECTOR('',#10034,1.);+#10034 = DIRECTION('',(0.,-1.));+#10035 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10036 = PCURVE('',#5873,#10037);+#10037 = DEFINITIONAL_REPRESENTATION('',(#10038),#10042);+#10038 = LINE('',#10039,#10040);+#10039 = CARTESIAN_POINT('',(1.,0.));+#10040 = VECTOR('',#10041,1.);+#10041 = DIRECTION('',(0.,-1.));+#10042 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10043 = ORIENTED_EDGE('',*,*,#10044,.T.);+#10044 = EDGE_CURVE('',#10022,#9973,#10045,.T.);+#10045 = SURFACE_CURVE('',#10046,(#10050,#10057),.PCURVE_S1.);+#10046 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10047,#10048,#10049),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10047 = CARTESIAN_POINT('',(-0.241516985212,-0.140622907366,0.97));+#10048 = CARTESIAN_POINT('',(-0.261524309431,-0.140622907366,0.97));+#10049 = CARTESIAN_POINT('',(-0.281722179594,-0.136335623605,0.97));+#10050 = PCURVE('',#5909,#10051);+#10051 = DEFINITIONAL_REPRESENTATION('',(#10052),#10056);+#10052 = LINE('',#10053,#10054);+#10053 = CARTESIAN_POINT('',(0.,-0.1));+#10054 = VECTOR('',#10055,1.);+#10055 = DIRECTION('',(1.,0.));+#10056 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10057 = PCURVE('',#9298,#10058);+#10058 = DEFINITIONAL_REPRESENTATION('',(#10059),#10063);+#10059 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10060,#10061,#10062),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10060 = CARTESIAN_POINT('',(0.110897739955,-5.525832403274E-03));+#10061 = CARTESIAN_POINT('',(9.089041573661E-02,-5.525832403274E-03));+#10062 = CARTESIAN_POINT('',(7.069254557292E-02,-1.238548642113E-03));+#10063 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10064 = ORIENTED_EDGE('',*,*,#9972,.F.);+#10065 = ADVANCED_FACE('',(#10066),#5873,.T.);+#10066 = FACE_BOUND('',#10067,.T.);+#10067 = EDGE_LOOP('',(#10068,#10069,#10092,#10113));+#10068 = ORIENTED_EDGE('',*,*,#5853,.T.);+#10069 = ORIENTED_EDGE('',*,*,#10070,.T.);+#10070 = EDGE_CURVE('',#5809,#10071,#10073,.T.);+#10071 = VERTEX_POINT('',#10072);+#10072 = CARTESIAN_POINT('',(-0.168347342355,-0.119281761533,0.97));+#10073 = SURFACE_CURVE('',#10074,(#10078,#10085),.PCURVE_S1.);+#10074 = LINE('',#10075,#10076);+#10075 = CARTESIAN_POINT('',(-0.168347342355,-0.119281761533,1.07));+#10076 = VECTOR('',#10077,1.);+#10077 = DIRECTION('',(-0.,-0.,-1.));+#10078 = PCURVE('',#5873,#10079);+#10079 = DEFINITIONAL_REPRESENTATION('',(#10080),#10084);+#10080 = LINE('',#10081,#10082);+#10081 = CARTESIAN_POINT('',(0.,0.));+#10082 = VECTOR('',#10083,1.);+#10083 = DIRECTION('',(0.,-1.));+#10084 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10085 = PCURVE('',#5834,#10086);+#10086 = DEFINITIONAL_REPRESENTATION('',(#10087),#10091);+#10087 = LINE('',#10088,#10089);+#10088 = CARTESIAN_POINT('',(1.,0.));+#10089 = VECTOR('',#10090,1.);+#10090 = DIRECTION('',(0.,-1.));+#10091 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10092 = ORIENTED_EDGE('',*,*,#10093,.T.);+#10093 = EDGE_CURVE('',#10071,#10022,#10094,.T.);+#10094 = SURFACE_CURVE('',#10095,(#10099,#10106),.PCURVE_S1.);+#10095 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10096,#10097,#10098),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10096 = CARTESIAN_POINT('',(-0.168347342355,-0.119281761533,0.97));+#10097 = CARTESIAN_POINT('',(-0.193499407087,-0.140622907366,0.97));+#10098 = CARTESIAN_POINT('',(-0.241516985212,-0.140622907366,0.97));+#10099 = PCURVE('',#5873,#10100);+#10100 = DEFINITIONAL_REPRESENTATION('',(#10101),#10105);+#10101 = LINE('',#10102,#10103);+#10102 = CARTESIAN_POINT('',(0.,-0.1));+#10103 = VECTOR('',#10104,1.);+#10104 = DIRECTION('',(1.,0.));+#10105 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10106 = PCURVE('',#9298,#10107);+#10107 = DEFINITIONAL_REPRESENTATION('',(#10108),#10112);+#10108 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10109,#10110,#10111),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10109 = CARTESIAN_POINT('',(0.184067382813,1.581531343006E-02));+#10110 = CARTESIAN_POINT('',(0.15891531808,-5.525832403274E-03));+#10111 = CARTESIAN_POINT('',(0.110897739955,-5.525832403274E-03));+#10112 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10113 = ORIENTED_EDGE('',*,*,#10021,.F.);+#10114 = ADVANCED_FACE('',(#10115),#5834,.T.);+#10115 = FACE_BOUND('',#10116,.T.);+#10116 = EDGE_LOOP('',(#10117,#10118,#10141,#10162));+#10117 = ORIENTED_EDGE('',*,*,#5808,.T.);+#10118 = ORIENTED_EDGE('',*,*,#10119,.T.);+#10119 = EDGE_CURVE('',#5773,#10120,#10122,.T.);+#10120 = VERTEX_POINT('',#10121);+#10121 = CARTESIAN_POINT('',(-0.143195277623,-5.735432942708E-02,0.97));+#10122 = SURFACE_CURVE('',#10123,(#10127,#10134),.PCURVE_S1.);+#10123 = LINE('',#10124,#10125);+#10124 = CARTESIAN_POINT('',(-0.143195277623,-5.735432942708E-02,1.07));+#10125 = VECTOR('',#10126,1.);+#10126 = DIRECTION('',(-0.,-0.,-1.));+#10127 = PCURVE('',#5834,#10128);+#10128 = DEFINITIONAL_REPRESENTATION('',(#10129),#10133);+#10129 = LINE('',#10130,#10131);+#10130 = CARTESIAN_POINT('',(0.,0.));+#10131 = VECTOR('',#10132,1.);+#10132 = DIRECTION('',(0.,-1.));+#10133 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10134 = PCURVE('',#5792,#10135);+#10135 = DEFINITIONAL_REPRESENTATION('',(#10136),#10140);+#10136 = LINE('',#10137,#10138);+#10137 = CARTESIAN_POINT('',(1.,0.));+#10138 = VECTOR('',#10139,1.);+#10139 = DIRECTION('',(0.,-1.));+#10140 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10141 = ORIENTED_EDGE('',*,*,#10142,.T.);+#10142 = EDGE_CURVE('',#10120,#10071,#10143,.T.);+#10143 = SURFACE_CURVE('',#10144,(#10148,#10155),.PCURVE_S1.);+#10144 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10145,#10146,#10147),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10145 = CARTESIAN_POINT('',(-0.143195277623,-5.735432942708E-02,0.97));+#10146 = CARTESIAN_POINT('',(-0.143195277623,-9.794061569941E-02,0.97));+#10147 = CARTESIAN_POINT('',(-0.168347342355,-0.119281761533,0.97));+#10148 = PCURVE('',#5834,#10149);+#10149 = DEFINITIONAL_REPRESENTATION('',(#10150),#10154);+#10150 = LINE('',#10151,#10152);+#10151 = CARTESIAN_POINT('',(0.,-0.1));+#10152 = VECTOR('',#10153,1.);+#10153 = DIRECTION('',(1.,0.));+#10154 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10155 = PCURVE('',#9298,#10156);+#10156 = DEFINITIONAL_REPRESENTATION('',(#10157),#10161);+#10157 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10158,#10159,#10160),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10158 = CARTESIAN_POINT('',(0.209219447545,7.774274553571E-02));+#10159 = CARTESIAN_POINT('',(0.209219447545,3.715645926339E-02));+#10160 = CARTESIAN_POINT('',(0.184067382813,1.581531343006E-02));+#10161 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10162 = ORIENTED_EDGE('',*,*,#10070,.F.);+#10163 = ADVANCED_FACE('',(#10164),#5792,.T.);+#10164 = FACE_BOUND('',#10165,.T.);+#10165 = EDGE_LOOP('',(#10166,#10167,#10190,#10211));+#10166 = ORIENTED_EDGE('',*,*,#5772,.T.);+#10167 = ORIENTED_EDGE('',*,*,#10168,.T.);+#10168 = EDGE_CURVE('',#5737,#10169,#10171,.T.);+#10169 = VERTEX_POINT('',#10170);+#10170 = CARTESIAN_POINT('',(-0.161487688337,-2.858189174107E-03,0.97));+#10171 = SURFACE_CURVE('',#10172,(#10176,#10183),.PCURVE_S1.);+#10172 = LINE('',#10173,#10174);+#10173 = CARTESIAN_POINT('',(-0.161487688337,-2.858189174107E-03,1.07));+#10174 = VECTOR('',#10175,1.);+#10175 = DIRECTION('',(-0.,-0.,-1.));+#10176 = PCURVE('',#5792,#10177);+#10177 = DEFINITIONAL_REPRESENTATION('',(#10178),#10182);+#10178 = LINE('',#10179,#10180);+#10179 = CARTESIAN_POINT('',(0.,0.));+#10180 = VECTOR('',#10181,1.);+#10181 = DIRECTION('',(0.,-1.));+#10182 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10183 = PCURVE('',#5756,#10184);+#10184 = DEFINITIONAL_REPRESENTATION('',(#10185),#10189);+#10185 = LINE('',#10186,#10187);+#10186 = CARTESIAN_POINT('',(1.,0.));+#10187 = VECTOR('',#10188,1.);+#10188 = DIRECTION('',(0.,-1.));+#10189 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10190 = ORIENTED_EDGE('',*,*,#10191,.T.);+#10191 = EDGE_CURVE('',#10169,#10120,#10192,.T.);+#10192 = SURFACE_CURVE('',#10193,(#10197,#10204),.PCURVE_S1.);+#10193 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10194,#10195,#10196),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10194 = CARTESIAN_POINT('',(-0.161487688337,-2.858189174107E-03,0.97));+#10195 = CARTESIAN_POINT('',(-0.143195277623,-2.286551339286E-02,0.97));+#10196 = CARTESIAN_POINT('',(-0.143195277623,-5.735432942708E-02,0.97));+#10197 = PCURVE('',#5792,#10198);+#10198 = DEFINITIONAL_REPRESENTATION('',(#10199),#10203);+#10199 = LINE('',#10200,#10201);+#10200 = CARTESIAN_POINT('',(0.,-0.1));+#10201 = VECTOR('',#10202,1.);+#10202 = DIRECTION('',(1.,0.));+#10203 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10204 = PCURVE('',#9298,#10205);+#10205 = DEFINITIONAL_REPRESENTATION('',(#10206),#10210);+#10206 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10207,#10208,#10209),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10207 = CARTESIAN_POINT('',(0.19092703683,0.132238885789));+#10208 = CARTESIAN_POINT('',(0.209219447545,0.11223156157));+#10209 = CARTESIAN_POINT('',(0.209219447545,7.774274553571E-02));+#10210 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10211 = ORIENTED_EDGE('',*,*,#10119,.F.);+#10212 = ADVANCED_FACE('',(#10213),#5756,.T.);+#10213 = FACE_BOUND('',#10214,.T.);+#10214 = EDGE_LOOP('',(#10215,#10216,#10239,#10260));+#10215 = ORIENTED_EDGE('',*,*,#5736,.T.);+#10216 = ORIENTED_EDGE('',*,*,#10217,.T.);+#10217 = EDGE_CURVE('',#5711,#10218,#10220,.T.);+#10218 = VERTEX_POINT('',#10219);+#10219 = CARTESIAN_POINT('',(-0.219794747489,2.648588634673E-02,0.97));+#10220 = SURFACE_CURVE('',#10221,(#10225,#10232),.PCURVE_S1.);+#10221 = LINE('',#10222,#10223);+#10222 = CARTESIAN_POINT('',(-0.219794747489,2.648588634673E-02,1.07));+#10223 = VECTOR('',#10224,1.);+#10224 = DIRECTION('',(-0.,-0.,-1.));+#10225 = PCURVE('',#5756,#10226);+#10226 = DEFINITIONAL_REPRESENTATION('',(#10227),#10231);+#10227 = LINE('',#10228,#10229);+#10228 = CARTESIAN_POINT('',(0.,0.));+#10229 = VECTOR('',#10230,1.);+#10230 = DIRECTION('',(0.,-1.));+#10231 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10232 = PCURVE('',#5725,#10233);+#10233 = DEFINITIONAL_REPRESENTATION('',(#10234),#10238);+#10234 = LINE('',#10235,#10236);+#10235 = CARTESIAN_POINT('',(2.070910976498E-02,0.));+#10236 = VECTOR('',#10237,1.);+#10237 = DIRECTION('',(0.,-1.));+#10238 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10239 = ORIENTED_EDGE('',*,*,#10240,.T.);+#10240 = EDGE_CURVE('',#10218,#10169,#10241,.T.);+#10241 = SURFACE_CURVE('',#10242,(#10246,#10253),.PCURVE_S1.);+#10242 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10243,#10244,#10245),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10243 = CARTESIAN_POINT('',(-0.219794747489,2.648588634673E-02,0.97));+#10244 = CARTESIAN_POINT('',(-0.179780099051,1.714913504464E-02,0.97));+#10245 = CARTESIAN_POINT('',(-0.161487688337,-2.858189174107E-03,0.97));+#10246 = PCURVE('',#5756,#10247);+#10247 = DEFINITIONAL_REPRESENTATION('',(#10248),#10252);+#10248 = LINE('',#10249,#10250);+#10249 = CARTESIAN_POINT('',(0.,-0.1));+#10250 = VECTOR('',#10251,1.);+#10251 = DIRECTION('',(1.,0.));+#10252 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10253 = PCURVE('',#9298,#10254);+#10254 = DEFINITIONAL_REPRESENTATION('',(#10255),#10259);+#10255 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10256,#10257,#10258),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10256 = CARTESIAN_POINT('',(0.132619977679,0.16158296131));+#10257 = CARTESIAN_POINT('',(0.172634626116,0.152246210007));+#10258 = CARTESIAN_POINT('',(0.19092703683,0.132238885789));+#10259 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10260 = ORIENTED_EDGE('',*,*,#10168,.F.);+#10261 = ADVANCED_FACE('',(#10262),#5725,.T.);+#10262 = FACE_BOUND('',#10263,.T.);+#10263 = EDGE_LOOP('',(#10264,#10265,#10288,#10309));+#10264 = ORIENTED_EDGE('',*,*,#5710,.F.);+#10265 = ORIENTED_EDGE('',*,*,#10266,.T.);+#10266 = EDGE_CURVE('',#5675,#10267,#10269,.T.);+#10267 = VERTEX_POINT('',#10268);+#10268 = CARTESIAN_POINT('',(-0.239992617653,3.10589890253E-02,0.97));+#10269 = SURFACE_CURVE('',#10270,(#10274,#10281),.PCURVE_S1.);+#10270 = LINE('',#10271,#10272);+#10271 = CARTESIAN_POINT('',(-0.239992617653,3.10589890253E-02,1.07));+#10272 = VECTOR('',#10273,1.);+#10273 = DIRECTION('',(-0.,-0.,-1.));+#10274 = PCURVE('',#5725,#10275);+#10275 = DEFINITIONAL_REPRESENTATION('',(#10276),#10280);+#10276 = LINE('',#10277,#10278);+#10277 = CARTESIAN_POINT('',(0.,0.));+#10278 = VECTOR('',#10279,1.);+#10279 = DIRECTION('',(0.,-1.));+#10280 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10281 = PCURVE('',#5694,#10282);+#10282 = DEFINITIONAL_REPRESENTATION('',(#10283),#10287);+#10283 = LINE('',#10284,#10285);+#10284 = CARTESIAN_POINT('',(1.,0.));+#10285 = VECTOR('',#10286,1.);+#10286 = DIRECTION('',(0.,-1.));+#10287 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10288 = ORIENTED_EDGE('',*,*,#10289,.T.);+#10289 = EDGE_CURVE('',#10267,#10218,#10290,.T.);+#10290 = SURFACE_CURVE('',#10291,(#10295,#10302),.PCURVE_S1.);+#10291 = LINE('',#10292,#10293);+#10292 = CARTESIAN_POINT('',(-0.239992617653,3.10589890253E-02,0.97));+#10293 = VECTOR('',#10294,1.);+#10294 = DIRECTION('',(0.975313298974,-0.220825652598,0.));+#10295 = PCURVE('',#5725,#10296);+#10296 = DEFINITIONAL_REPRESENTATION('',(#10297),#10301);+#10297 = LINE('',#10298,#10299);+#10298 = CARTESIAN_POINT('',(0.,-0.1));+#10299 = VECTOR('',#10300,1.);+#10300 = DIRECTION('',(1.,0.));+#10301 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10302 = PCURVE('',#9298,#10303);+#10303 = DEFINITIONAL_REPRESENTATION('',(#10304),#10308);+#10304 = LINE('',#10305,#10306);+#10305 = CARTESIAN_POINT('',(0.112422107515,0.166156063988));+#10306 = VECTOR('',#10307,1.);+#10307 = DIRECTION('',(0.975313298974,-0.220825652598));+#10308 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10309 = ORIENTED_EDGE('',*,*,#10217,.F.);+#10310 = ADVANCED_FACE('',(#10311),#5694,.T.);+#10311 = FACE_BOUND('',#10312,.T.);+#10312 = EDGE_LOOP('',(#10313,#10314,#10337,#10358));+#10313 = ORIENTED_EDGE('',*,*,#5674,.T.);+#10314 = ORIENTED_EDGE('',*,*,#10315,.T.);+#10315 = EDGE_CURVE('',#5639,#10316,#10318,.T.);+#10316 = VERTEX_POINT('',#10317);+#10317 = CARTESIAN_POINT('',(-0.278768717448,4.763648623512E-02,0.97));+#10318 = SURFACE_CURVE('',#10319,(#10323,#10330),.PCURVE_S1.);+#10319 = LINE('',#10320,#10321);+#10320 = CARTESIAN_POINT('',(-0.278768717448,4.763648623512E-02,1.07));+#10321 = VECTOR('',#10322,1.);+#10322 = DIRECTION('',(-0.,-0.,-1.));+#10323 = PCURVE('',#5694,#10324);+#10324 = DEFINITIONAL_REPRESENTATION('',(#10325),#10329);+#10325 = LINE('',#10326,#10327);+#10326 = CARTESIAN_POINT('',(0.,0.));+#10327 = VECTOR('',#10328,1.);+#10328 = DIRECTION('',(0.,-1.));+#10329 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10330 = PCURVE('',#5658,#10331);+#10331 = DEFINITIONAL_REPRESENTATION('',(#10332),#10336);+#10332 = LINE('',#10333,#10334);+#10333 = CARTESIAN_POINT('',(1.,0.));+#10334 = VECTOR('',#10335,1.);+#10335 = DIRECTION('',(0.,-1.));+#10336 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10337 = ORIENTED_EDGE('',*,*,#10338,.T.);+#10338 = EDGE_CURVE('',#10316,#10267,#10339,.T.);+#10339 = SURFACE_CURVE('',#10340,(#10344,#10351),.PCURVE_S1.);+#10340 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10341,#10342,#10343),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10341 = CARTESIAN_POINT('',(-0.278768717448,4.763648623512E-02,0.97));+#10342 = CARTESIAN_POINT('',(-0.268383963449,3.772809709821E-02,0.97));+#10343 = CARTESIAN_POINT('',(-0.239992617653,3.10589890253E-02,0.97));+#10344 = PCURVE('',#5694,#10345);+#10345 = DEFINITIONAL_REPRESENTATION('',(#10346),#10350);+#10346 = LINE('',#10347,#10348);+#10347 = CARTESIAN_POINT('',(0.,-0.1));+#10348 = VECTOR('',#10349,1.);+#10349 = DIRECTION('',(1.,0.));+#10350 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10351 = PCURVE('',#9298,#10352);+#10352 = DEFINITIONAL_REPRESENTATION('',(#10353),#10357);+#10353 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10354,#10355,#10356),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10354 = CARTESIAN_POINT('',(7.364600771949E-02,0.182733561198));+#10355 = CARTESIAN_POINT('',(8.403076171875E-02,0.172825172061));+#10356 = CARTESIAN_POINT('',(0.112422107515,0.166156063988));+#10357 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10358 = ORIENTED_EDGE('',*,*,#10266,.F.);+#10359 = ADVANCED_FACE('',(#10360),#5658,.T.);+#10360 = FACE_BOUND('',#10361,.T.);+#10361 = EDGE_LOOP('',(#10362,#10363,#10386,#10407));+#10362 = ORIENTED_EDGE('',*,*,#5638,.T.);+#10363 = ORIENTED_EDGE('',*,*,#10364,.T.);+#10364 = EDGE_CURVE('',#5594,#10365,#10367,.T.);+#10365 = VERTEX_POINT('',#10366);+#10366 = CARTESIAN_POINT('',(-0.289153471447,7.640892392113E-02,0.97));+#10367 = SURFACE_CURVE('',#10368,(#10372,#10379),.PCURVE_S1.);+#10368 = LINE('',#10369,#10370);+#10369 = CARTESIAN_POINT('',(-0.289153471447,7.640892392113E-02,1.07));+#10370 = VECTOR('',#10371,1.);+#10371 = DIRECTION('',(-0.,-0.,-1.));+#10372 = PCURVE('',#5658,#10373);+#10373 = DEFINITIONAL_REPRESENTATION('',(#10374),#10378);+#10374 = LINE('',#10375,#10376);+#10375 = CARTESIAN_POINT('',(0.,0.));+#10376 = VECTOR('',#10377,1.);+#10377 = DIRECTION('',(0.,-1.));+#10378 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10379 = PCURVE('',#5619,#10380);+#10380 = DEFINITIONAL_REPRESENTATION('',(#10381),#10385);+#10381 = LINE('',#10382,#10383);+#10382 = CARTESIAN_POINT('',(1.,0.));+#10383 = VECTOR('',#10384,1.);+#10384 = DIRECTION('',(0.,-1.));+#10385 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10386 = ORIENTED_EDGE('',*,*,#10387,.T.);+#10387 = EDGE_CURVE('',#10365,#10316,#10388,.T.);+#10388 = SURFACE_CURVE('',#10389,(#10393,#10400),.PCURVE_S1.);+#10389 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10390,#10391,#10392),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10390 = CARTESIAN_POINT('',(-0.289153471447,7.640892392113E-02,0.97));+#10391 = CARTESIAN_POINT('',(-0.289153471447,5.754487537202E-02,0.97));+#10392 = CARTESIAN_POINT('',(-0.278768717448,4.763648623512E-02,0.97));+#10393 = PCURVE('',#5658,#10394);+#10394 = DEFINITIONAL_REPRESENTATION('',(#10395),#10399);+#10395 = LINE('',#10396,#10397);+#10396 = CARTESIAN_POINT('',(0.,-0.1));+#10397 = VECTOR('',#10398,1.);+#10398 = DIRECTION('',(1.,0.));+#10399 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10400 = PCURVE('',#9298,#10401);+#10401 = DEFINITIONAL_REPRESENTATION('',(#10402),#10406);+#10402 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10403,#10404,#10405),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10403 = CARTESIAN_POINT('',(6.326125372024E-02,0.211505998884));+#10404 = CARTESIAN_POINT('',(6.326125372024E-02,0.192641950335));+#10405 = CARTESIAN_POINT('',(7.364600771949E-02,0.182733561198));+#10406 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10407 = ORIENTED_EDGE('',*,*,#10315,.F.);+#10408 = ADVANCED_FACE('',(#10409),#5619,.T.);+#10409 = FACE_BOUND('',#10410,.T.);+#10410 = EDGE_LOOP('',(#10411,#10412,#10435,#10456));+#10411 = ORIENTED_EDGE('',*,*,#5593,.T.);+#10412 = ORIENTED_EDGE('',*,*,#10413,.T.);+#10413 = EDGE_CURVE('',#5558,#10414,#10416,.T.);+#10414 = VERTEX_POINT('',#10415);+#10415 = CARTESIAN_POINT('',(-0.273338158017,0.110611921038,0.97));+#10416 = SURFACE_CURVE('',#10417,(#10421,#10428),.PCURVE_S1.);+#10417 = LINE('',#10418,#10419);+#10418 = CARTESIAN_POINT('',(-0.273338158017,0.110611921038,1.07));+#10419 = VECTOR('',#10420,1.);+#10420 = DIRECTION('',(-0.,-0.,-1.));+#10421 = PCURVE('',#5619,#10422);+#10422 = DEFINITIONAL_REPRESENTATION('',(#10423),#10427);+#10423 = LINE('',#10424,#10425);+#10424 = CARTESIAN_POINT('',(0.,0.));+#10425 = VECTOR('',#10426,1.);+#10426 = DIRECTION('',(0.,-1.));+#10427 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10428 = PCURVE('',#5577,#10429);+#10429 = DEFINITIONAL_REPRESENTATION('',(#10430),#10434);+#10430 = LINE('',#10431,#10432);+#10431 = CARTESIAN_POINT('',(1.,0.));+#10432 = VECTOR('',#10433,1.);+#10433 = DIRECTION('',(0.,-1.));+#10434 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10435 = ORIENTED_EDGE('',*,*,#10436,.T.);+#10436 = EDGE_CURVE('',#10414,#10365,#10437,.T.);+#10437 = SURFACE_CURVE('',#10438,(#10442,#10449),.PCURVE_S1.);+#10438 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10439,#10440,#10441),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10439 = CARTESIAN_POINT('',(-0.273338158017,0.110611921038,0.97));+#10440 = CARTESIAN_POINT('',(-0.289153471447,9.79406156994E-02,0.97));+#10441 = CARTESIAN_POINT('',(-0.289153471447,7.640892392113E-02,0.97));+#10442 = PCURVE('',#5619,#10443);+#10443 = DEFINITIONAL_REPRESENTATION('',(#10444),#10448);+#10444 = LINE('',#10445,#10446);+#10445 = CARTESIAN_POINT('',(0.,-0.1));+#10446 = VECTOR('',#10447,1.);+#10447 = DIRECTION('',(1.,0.));+#10448 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10449 = PCURVE('',#9298,#10450);+#10450 = DEFINITIONAL_REPRESENTATION('',(#10451),#10455);+#10451 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10452,#10453,#10454),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10452 = CARTESIAN_POINT('',(7.90765671503E-02,0.245708996001));+#10453 = CARTESIAN_POINT('',(6.326125372024E-02,0.233037690662));+#10454 = CARTESIAN_POINT('',(6.326125372024E-02,0.211505998884));+#10455 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10456 = ORIENTED_EDGE('',*,*,#10364,.F.);+#10457 = ADVANCED_FACE('',(#10458),#5577,.T.);+#10458 = FACE_BOUND('',#10459,.T.);+#10459 = EDGE_LOOP('',(#10460,#10461,#10484,#10505));+#10460 = ORIENTED_EDGE('',*,*,#5557,.T.);+#10461 = ORIENTED_EDGE('',*,*,#10462,.T.);+#10462 = EDGE_CURVE('',#5522,#10463,#10465,.T.);+#10463 = VERTEX_POINT('',#10464);+#10464 = CARTESIAN_POINT('',(-0.230274774461,0.123283226376,0.97));+#10465 = SURFACE_CURVE('',#10466,(#10470,#10477),.PCURVE_S1.);+#10466 = LINE('',#10467,#10468);+#10467 = CARTESIAN_POINT('',(-0.230274774461,0.123283226376,1.07));+#10468 = VECTOR('',#10469,1.);+#10469 = DIRECTION('',(-0.,-0.,-1.));+#10470 = PCURVE('',#5577,#10471);+#10471 = DEFINITIONAL_REPRESENTATION('',(#10472),#10476);+#10472 = LINE('',#10473,#10474);+#10473 = CARTESIAN_POINT('',(0.,0.));+#10474 = VECTOR('',#10475,1.);+#10475 = DIRECTION('',(0.,-1.));+#10476 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10477 = PCURVE('',#5541,#10478);+#10478 = DEFINITIONAL_REPRESENTATION('',(#10479),#10483);+#10479 = LINE('',#10480,#10481);+#10480 = CARTESIAN_POINT('',(1.,0.));+#10481 = VECTOR('',#10482,1.);+#10482 = DIRECTION('',(0.,-1.));+#10483 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10484 = ORIENTED_EDGE('',*,*,#10485,.T.);+#10485 = EDGE_CURVE('',#10463,#10414,#10486,.T.);+#10486 = SURFACE_CURVE('',#10487,(#10491,#10498),.PCURVE_S1.);+#10487 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10488,#10489,#10490),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10488 = CARTESIAN_POINT('',(-0.230274774461,0.123283226376,0.97));+#10489 = CARTESIAN_POINT('',(-0.257522844587,0.123283226376,0.97));+#10490 = CARTESIAN_POINT('',(-0.273338158017,0.110611921038,0.97));+#10491 = PCURVE('',#5577,#10492);+#10492 = DEFINITIONAL_REPRESENTATION('',(#10493),#10497);+#10493 = LINE('',#10494,#10495);+#10494 = CARTESIAN_POINT('',(0.,-0.1));+#10495 = VECTOR('',#10496,1.);+#10496 = DIRECTION('',(1.,0.));+#10497 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10498 = PCURVE('',#9298,#10499);+#10499 = DEFINITIONAL_REPRESENTATION('',(#10500),#10504);+#10500 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10501,#10502,#10503),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10501 = CARTESIAN_POINT('',(0.122139950707,0.258380301339));+#10502 = CARTESIAN_POINT('',(9.489188058036E-02,0.258380301339));+#10503 = CARTESIAN_POINT('',(7.90765671503E-02,0.245708996001));+#10504 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10505 = ORIENTED_EDGE('',*,*,#10413,.F.);+#10506 = ADVANCED_FACE('',(#10507),#5541,.T.);+#10507 = FACE_BOUND('',#10508,.T.);+#10508 = EDGE_LOOP('',(#10509,#10510,#10533,#10554));+#10509 = ORIENTED_EDGE('',*,*,#5521,.T.);+#10510 = ORIENTED_EDGE('',*,*,#10511,.T.);+#10511 = EDGE_CURVE('',#5486,#10512,#10514,.T.);+#10512 = VERTEX_POINT('',#10513);+#10513 = CARTESIAN_POINT('',(-0.194737955729,0.117566848028,0.97));+#10514 = SURFACE_CURVE('',#10515,(#10519,#10526),.PCURVE_S1.);+#10515 = LINE('',#10516,#10517);+#10516 = CARTESIAN_POINT('',(-0.194737955729,0.117566848028,1.07));+#10517 = VECTOR('',#10518,1.);+#10518 = DIRECTION('',(-0.,-0.,-1.));+#10519 = PCURVE('',#5541,#10520);+#10520 = DEFINITIONAL_REPRESENTATION('',(#10521),#10525);+#10521 = LINE('',#10522,#10523);+#10522 = CARTESIAN_POINT('',(0.,0.));+#10523 = VECTOR('',#10524,1.);+#10524 = DIRECTION('',(0.,-1.));+#10525 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10526 = PCURVE('',#5505,#10527);+#10527 = DEFINITIONAL_REPRESENTATION('',(#10528),#10532);+#10528 = LINE('',#10529,#10530);+#10529 = CARTESIAN_POINT('',(1.,0.));+#10530 = VECTOR('',#10531,1.);+#10531 = DIRECTION('',(0.,-1.));+#10532 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10533 = ORIENTED_EDGE('',*,*,#10534,.T.);+#10534 = EDGE_CURVE('',#10512,#10463,#10535,.T.);+#10535 = SURFACE_CURVE('',#10536,(#10540,#10547),.PCURVE_S1.);+#10536 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10537,#10538,#10539),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10537 = CARTESIAN_POINT('',(-0.194737955729,0.117566848028,0.97));+#10538 = CARTESIAN_POINT('',(-0.212363455636,0.123283226376,0.97));+#10539 = CARTESIAN_POINT('',(-0.230274774461,0.123283226376,0.97));+#10540 = PCURVE('',#5541,#10541);+#10541 = DEFINITIONAL_REPRESENTATION('',(#10542),#10546);+#10542 = LINE('',#10543,#10544);+#10543 = CARTESIAN_POINT('',(0.,-0.1));+#10544 = VECTOR('',#10545,1.);+#10545 = DIRECTION('',(1.,0.));+#10546 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10547 = PCURVE('',#9298,#10548);+#10548 = DEFINITIONAL_REPRESENTATION('',(#10549),#10553);+#10549 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10550,#10551,#10552),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10550 = CARTESIAN_POINT('',(0.157676769438,0.252663922991));+#10551 = CARTESIAN_POINT('',(0.140051269531,0.258380301339));+#10552 = CARTESIAN_POINT('',(0.122139950707,0.258380301339));+#10553 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10554 = ORIENTED_EDGE('',*,*,#10462,.F.);+#10555 = ADVANCED_FACE('',(#10556),#5505,.T.);+#10556 = FACE_BOUND('',#10557,.T.);+#10557 = EDGE_LOOP('',(#10558,#10559,#10582,#10603));+#10558 = ORIENTED_EDGE('',*,*,#5485,.T.);+#10559 = ORIENTED_EDGE('',*,*,#10560,.T.);+#10560 = EDGE_CURVE('',#5460,#10561,#10563,.T.);+#10561 = VERTEX_POINT('',#10562);+#10562 = CARTESIAN_POINT('',(-0.159582228888,0.100608258929,0.97));+#10563 = SURFACE_CURVE('',#10564,(#10568,#10575),.PCURVE_S1.);+#10564 = LINE('',#10565,#10566);+#10565 = CARTESIAN_POINT('',(-0.159582228888,0.100608258929,1.07));+#10566 = VECTOR('',#10567,1.);+#10567 = DIRECTION('',(-0.,-0.,-1.));+#10568 = PCURVE('',#5505,#10569);+#10569 = DEFINITIONAL_REPRESENTATION('',(#10570),#10574);+#10570 = LINE('',#10571,#10572);+#10571 = CARTESIAN_POINT('',(0.,0.));+#10572 = VECTOR('',#10573,1.);+#10573 = DIRECTION('',(0.,-1.));+#10574 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10575 = PCURVE('',#5474,#10576);+#10576 = DEFINITIONAL_REPRESENTATION('',(#10577),#10581);+#10577 = LINE('',#10578,#10579);+#10578 = CARTESIAN_POINT('',(3.90619187128E-02,0.));+#10579 = VECTOR('',#10580,1.);+#10580 = DIRECTION('',(0.,-1.));+#10581 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10582 = ORIENTED_EDGE('',*,*,#10583,.T.);+#10583 = EDGE_CURVE('',#10561,#10512,#10584,.T.);+#10584 = SURFACE_CURVE('',#10585,(#10589,#10596),.PCURVE_S1.);+#10585 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10586,#10587,#10588),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10586 = CARTESIAN_POINT('',(-0.159582228888,0.100608258929,0.97));+#10587 = CARTESIAN_POINT('',(-0.177112455822,0.11185046968,0.97));+#10588 = CARTESIAN_POINT('',(-0.194737955729,0.117566848028,0.97));+#10589 = PCURVE('',#5505,#10590);+#10590 = DEFINITIONAL_REPRESENTATION('',(#10591),#10595);+#10591 = LINE('',#10592,#10593);+#10592 = CARTESIAN_POINT('',(0.,-0.1));+#10593 = VECTOR('',#10594,1.);+#10594 = DIRECTION('',(1.,0.));+#10595 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10596 = PCURVE('',#9298,#10597);+#10597 = DEFINITIONAL_REPRESENTATION('',(#10598),#10602);+#10598 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10599,#10600,#10601),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10599 = CARTESIAN_POINT('',(0.19283249628,0.235705333891));+#10600 = CARTESIAN_POINT('',(0.175302269345,0.246947544643));+#10601 = CARTESIAN_POINT('',(0.157676769438,0.252663922991));+#10602 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10603 = ORIENTED_EDGE('',*,*,#10511,.F.);+#10604 = ADVANCED_FACE('',(#10605),#5474,.T.);+#10605 = FACE_BOUND('',#10606,.T.);+#10606 = EDGE_LOOP('',(#10607,#10608,#10609,#10630));+#10607 = ORIENTED_EDGE('',*,*,#5459,.F.);+#10608 = ORIENTED_EDGE('',*,*,#9310,.T.);+#10609 = ORIENTED_EDGE('',*,*,#10610,.T.);+#10610 = EDGE_CURVE('',#9283,#10561,#10611,.T.);+#10611 = SURFACE_CURVE('',#10612,(#10616,#10623),.PCURVE_S1.);+#10612 = LINE('',#10613,#10614);+#10613 = CARTESIAN_POINT('',(-0.159582228888,0.139670177641,0.97));+#10614 = VECTOR('',#10615,1.);+#10615 = DIRECTION('',(0.,-1.,0.));+#10616 = PCURVE('',#5474,#10617);+#10617 = DEFINITIONAL_REPRESENTATION('',(#10618),#10622);+#10618 = LINE('',#10619,#10620);+#10619 = CARTESIAN_POINT('',(0.,-0.1));+#10620 = VECTOR('',#10621,1.);+#10621 = DIRECTION('',(1.,0.));+#10622 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10623 = PCURVE('',#9298,#10624);+#10624 = DEFINITIONAL_REPRESENTATION('',(#10625),#10629);+#10625 = LINE('',#10626,#10627);+#10626 = CARTESIAN_POINT('',(0.19283249628,0.274767252604));+#10627 = VECTOR('',#10628,1.);+#10628 = DIRECTION('',(0.,-1.));+#10629 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10630 = ORIENTED_EDGE('',*,*,#10560,.F.);+#10631 = ADVANCED_FACE('',(#10632),#6435,.T.);+#10632 = FACE_BOUND('',#10633,.T.);+#10633 = EDGE_LOOP('',(#10634,#10635,#10658,#10686));+#10634 = ORIENTED_EDGE('',*,*,#6418,.F.);+#10635 = ORIENTED_EDGE('',*,*,#10636,.T.);+#10636 = EDGE_CURVE('',#6419,#10637,#10639,.T.);+#10637 = VERTEX_POINT('',#10638);+#10638 = CARTESIAN_POINT('',(4.525466192336E-02,0.116995210193,0.97));+#10639 = SURFACE_CURVE('',#10640,(#10644,#10651),.PCURVE_S1.);+#10640 = LINE('',#10641,#10642);+#10641 = CARTESIAN_POINT('',(4.525466192336E-02,0.116995210193,1.07));+#10642 = VECTOR('',#10643,1.);+#10643 = DIRECTION('',(-0.,-0.,-1.));+#10644 = PCURVE('',#6435,#10645);+#10645 = DEFINITIONAL_REPRESENTATION('',(#10646),#10650);+#10646 = LINE('',#10647,#10648);+#10647 = CARTESIAN_POINT('',(0.,0.));+#10648 = VECTOR('',#10649,1.);+#10649 = DIRECTION('',(0.,-1.));+#10650 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10651 = PCURVE('',#6589,#10652);+#10652 = DEFINITIONAL_REPRESENTATION('',(#10653),#10657);+#10653 = LINE('',#10654,#10655);+#10654 = CARTESIAN_POINT('',(0.270865534471,0.));+#10655 = VECTOR('',#10656,1.);+#10656 = DIRECTION('',(0.,-1.));+#10657 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10658 = ORIENTED_EDGE('',*,*,#10659,.T.);+#10659 = EDGE_CURVE('',#10637,#10660,#10662,.T.);+#10660 = VERTEX_POINT('',#10661);+#10661 = CARTESIAN_POINT('',(-9.098568870908E-02,0.116995210193,0.97));+#10662 = SURFACE_CURVE('',#10663,(#10667,#10674),.PCURVE_S1.);+#10663 = LINE('',#10664,#10665);+#10664 = CARTESIAN_POINT('',(4.525466192336E-02,0.116995210193,0.97));+#10665 = VECTOR('',#10666,1.);+#10666 = DIRECTION('',(-1.,0.,0.));+#10667 = PCURVE('',#6435,#10668);+#10668 = DEFINITIONAL_REPRESENTATION('',(#10669),#10673);+#10669 = LINE('',#10670,#10671);+#10670 = CARTESIAN_POINT('',(0.,-0.1));+#10671 = VECTOR('',#10672,1.);+#10672 = DIRECTION('',(1.,0.));+#10673 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10674 = PCURVE('',#10675,#10680);+#10675 = PLANE('',#10676);+#10676 = AXIS2_PLACEMENT_3D('',#10677,#10678,#10679);+#10677 = CARTESIAN_POINT('',(-0.117471575056,-0.135097074963,0.97));+#10678 = DIRECTION('',(0.,0.,1.));+#10679 = DIRECTION('',(1.,0.,0.));+#10680 = DEFINITIONAL_REPRESENTATION('',(#10681),#10685);+#10681 = LINE('',#10682,#10683);+#10682 = CARTESIAN_POINT('',(0.162726236979,0.252092285156));+#10683 = VECTOR('',#10684,1.);+#10684 = DIRECTION('',(-1.,0.));+#10685 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10686 = ORIENTED_EDGE('',*,*,#10687,.F.);+#10687 = EDGE_CURVE('',#6421,#10660,#10688,.T.);+#10688 = SURFACE_CURVE('',#10689,(#10693,#10700),.PCURVE_S1.);+#10689 = LINE('',#10690,#10691);+#10690 = CARTESIAN_POINT('',(-9.098568870908E-02,0.116995210193,1.07));+#10691 = VECTOR('',#10692,1.);+#10692 = DIRECTION('',(-0.,-0.,-1.));+#10693 = PCURVE('',#6435,#10694);+#10694 = DEFINITIONAL_REPRESENTATION('',(#10695),#10699);+#10695 = LINE('',#10696,#10697);+#10696 = CARTESIAN_POINT('',(0.136240350632,0.));+#10697 = VECTOR('',#10698,1.);+#10698 = DIRECTION('',(0.,-1.));+#10699 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10700 = PCURVE('',#6461,#10701);+#10701 = DEFINITIONAL_REPRESENTATION('',(#10702),#10706);+#10702 = LINE('',#10703,#10704);+#10703 = CARTESIAN_POINT('',(0.,0.));+#10704 = VECTOR('',#10705,1.);+#10705 = DIRECTION('',(0.,-1.));+#10706 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10707 = ADVANCED_FACE('',(#10708),#6589,.T.);+#10708 = FACE_BOUND('',#10709,.T.);+#10709 = EDGE_LOOP('',(#10710,#10711,#10734,#10755));+#10710 = ORIENTED_EDGE('',*,*,#6576,.F.);+#10711 = ORIENTED_EDGE('',*,*,#10712,.T.);+#10712 = EDGE_CURVE('',#6551,#10713,#10715,.T.);+#10713 = VERTEX_POINT('',#10714);+#10714 = CARTESIAN_POINT('',(-5.382922944568E-02,-0.135097074963,0.97));+#10715 = SURFACE_CURVE('',#10716,(#10720,#10727),.PCURVE_S1.);+#10716 = LINE('',#10717,#10718);+#10717 = CARTESIAN_POINT('',(-5.382922944568E-02,-0.135097074963,1.07));+#10718 = VECTOR('',#10719,1.);+#10719 = DIRECTION('',(-0.,-0.,-1.));+#10720 = PCURVE('',#6589,#10721);+#10721 = DEFINITIONAL_REPRESENTATION('',(#10722),#10726);+#10722 = LINE('',#10723,#10724);+#10723 = CARTESIAN_POINT('',(0.,0.));+#10724 = VECTOR('',#10725,1.);+#10725 = DIRECTION('',(0.,-1.));+#10726 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10727 = PCURVE('',#6565,#10728);+#10728 = DEFINITIONAL_REPRESENTATION('',(#10729),#10733);+#10729 = LINE('',#10730,#10731);+#10730 = CARTESIAN_POINT('',(4.020519438244E-02,0.));+#10731 = VECTOR('',#10732,1.);+#10732 = DIRECTION('',(0.,-1.));+#10733 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10734 = ORIENTED_EDGE('',*,*,#10735,.T.);+#10735 = EDGE_CURVE('',#10713,#10637,#10736,.T.);+#10736 = SURFACE_CURVE('',#10737,(#10741,#10748),.PCURVE_S1.);+#10737 = LINE('',#10738,#10739);+#10738 = CARTESIAN_POINT('',(-5.382922944568E-02,-0.135097074963,0.97));+#10739 = VECTOR('',#10740,1.);+#10740 = DIRECTION('',(0.365804721382,0.93069162767,0.));+#10741 = PCURVE('',#6589,#10742);+#10742 = DEFINITIONAL_REPRESENTATION('',(#10743),#10747);+#10743 = LINE('',#10744,#10745);+#10744 = CARTESIAN_POINT('',(0.,-0.1));+#10745 = VECTOR('',#10746,1.);+#10746 = DIRECTION('',(1.,0.));+#10747 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10748 = PCURVE('',#10675,#10749);+#10749 = DEFINITIONAL_REPRESENTATION('',(#10750),#10754);+#10750 = LINE('',#10751,#10752);+#10751 = CARTESIAN_POINT('',(6.364234561012E-02,0.));+#10752 = VECTOR('',#10753,1.);+#10753 = DIRECTION('',(0.365804721382,0.93069162767));+#10754 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10755 = ORIENTED_EDGE('',*,*,#10636,.F.);+#10756 = ADVANCED_FACE('',(#10757),#6565,.T.);+#10757 = FACE_BOUND('',#10758,.T.);+#10758 = EDGE_LOOP('',(#10759,#10760,#10783,#10804));+#10759 = ORIENTED_EDGE('',*,*,#6550,.F.);+#10760 = ORIENTED_EDGE('',*,*,#10761,.T.);+#10761 = EDGE_CURVE('',#6525,#10762,#10764,.T.);+#10762 = VERTEX_POINT('',#10763);+#10763 = CARTESIAN_POINT('',(-1.362403506324E-02,-0.135097074963,0.97));+#10764 = SURFACE_CURVE('',#10765,(#10769,#10776),.PCURVE_S1.);+#10765 = LINE('',#10766,#10767);+#10766 = CARTESIAN_POINT('',(-1.362403506324E-02,-0.135097074963,1.07));+#10767 = VECTOR('',#10768,1.);+#10768 = DIRECTION('',(-0.,-0.,-1.));+#10769 = PCURVE('',#6565,#10770);+#10770 = DEFINITIONAL_REPRESENTATION('',(#10771),#10775);+#10771 = LINE('',#10772,#10773);+#10772 = CARTESIAN_POINT('',(0.,0.));+#10773 = VECTOR('',#10774,1.);+#10774 = DIRECTION('',(0.,-1.));+#10775 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10776 = PCURVE('',#6539,#10777);+#10777 = DEFINITIONAL_REPRESENTATION('',(#10778),#10782);+#10778 = LINE('',#10779,#10780);+#10779 = CARTESIAN_POINT('',(0.286757719851,0.));+#10780 = VECTOR('',#10781,1.);+#10781 = DIRECTION('',(0.,-1.));+#10782 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10783 = ORIENTED_EDGE('',*,*,#10784,.T.);+#10784 = EDGE_CURVE('',#10762,#10713,#10785,.T.);+#10785 = SURFACE_CURVE('',#10786,(#10790,#10797),.PCURVE_S1.);+#10786 = LINE('',#10787,#10788);+#10787 = CARTESIAN_POINT('',(-1.362403506324E-02,-0.135097074963,0.97));+#10788 = VECTOR('',#10789,1.);+#10789 = DIRECTION('',(-1.,0.,0.));+#10790 = PCURVE('',#6565,#10791);+#10791 = DEFINITIONAL_REPRESENTATION('',(#10792),#10796);+#10792 = LINE('',#10793,#10794);+#10793 = CARTESIAN_POINT('',(0.,-0.1));+#10794 = VECTOR('',#10795,1.);+#10795 = DIRECTION('',(1.,0.));+#10796 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10797 = PCURVE('',#10675,#10798);+#10798 = DEFINITIONAL_REPRESENTATION('',(#10799),#10803);+#10799 = LINE('',#10800,#10801);+#10800 = CARTESIAN_POINT('',(0.103847539993,0.));+#10801 = VECTOR('',#10802,1.);+#10802 = DIRECTION('',(-1.,0.));+#10803 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10804 = ORIENTED_EDGE('',*,*,#10712,.F.);+#10805 = ADVANCED_FACE('',(#10806),#6539,.T.);+#10806 = FACE_BOUND('',#10807,.T.);+#10807 = EDGE_LOOP('',(#10808,#10809,#10832,#10853));+#10808 = ORIENTED_EDGE('',*,*,#6524,.F.);+#10809 = ORIENTED_EDGE('',*,*,#10810,.T.);+#10810 = EDGE_CURVE('',#6499,#10811,#10813,.T.);+#10811 = VERTEX_POINT('',#10812);+#10812 = CARTESIAN_POINT('',(8.812749953497E-02,0.133001069568,0.97));+#10813 = SURFACE_CURVE('',#10814,(#10818,#10825),.PCURVE_S1.);+#10814 = LINE('',#10815,#10816);+#10815 = CARTESIAN_POINT('',(8.812749953497E-02,0.133001069568,1.07));+#10816 = VECTOR('',#10817,1.);+#10817 = DIRECTION('',(-0.,-0.,-1.));+#10818 = PCURVE('',#6539,#10819);+#10819 = DEFINITIONAL_REPRESENTATION('',(#10820),#10824);+#10820 = LINE('',#10821,#10822);+#10821 = CARTESIAN_POINT('',(0.,0.));+#10822 = VECTOR('',#10823,1.);+#10823 = DIRECTION('',(0.,-1.));+#10824 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10825 = PCURVE('',#6513,#10826);+#10826 = DEFINITIONAL_REPRESENTATION('',(#10827),#10831);+#10827 = LINE('',#10828,#10829);+#10828 = CARTESIAN_POINT('',(1.638695126488E-02,0.));+#10829 = VECTOR('',#10830,1.);+#10830 = DIRECTION('',(0.,-1.));+#10831 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10832 = ORIENTED_EDGE('',*,*,#10833,.T.);+#10833 = EDGE_CURVE('',#10811,#10762,#10834,.T.);+#10834 = SURFACE_CURVE('',#10835,(#10839,#10846),.PCURVE_S1.);+#10835 = LINE('',#10836,#10837);+#10836 = CARTESIAN_POINT('',(8.812749953497E-02,0.133001069568,0.97));+#10837 = VECTOR('',#10838,1.);+#10838 = DIRECTION('',(-0.354834508557,-0.934929126478,0.));+#10839 = PCURVE('',#6539,#10840);+#10840 = DEFINITIONAL_REPRESENTATION('',(#10841),#10845);+#10841 = LINE('',#10842,#10843);+#10842 = CARTESIAN_POINT('',(-0.,-0.1));+#10843 = VECTOR('',#10844,1.);+#10844 = DIRECTION('',(1.,0.));+#10845 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10846 = PCURVE('',#10675,#10847);+#10847 = DEFINITIONAL_REPRESENTATION('',(#10848),#10852);+#10848 = LINE('',#10849,#10850);+#10849 = CARTESIAN_POINT('',(0.205599074591,0.268098144531));+#10850 = VECTOR('',#10851,1.);+#10851 = DIRECTION('',(-0.354834508557,-0.934929126478));+#10852 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10853 = ORIENTED_EDGE('',*,*,#10761,.F.);+#10854 = ADVANCED_FACE('',(#10855),#6513,.T.);+#10855 = FACE_BOUND('',#10856,.T.);+#10856 = EDGE_LOOP('',(#10857,#10858,#10881,#10902));+#10857 = ORIENTED_EDGE('',*,*,#6498,.F.);+#10858 = ORIENTED_EDGE('',*,*,#10859,.T.);+#10859 = EDGE_CURVE('',#6473,#10860,#10862,.T.);+#10860 = VERTEX_POINT('',#10861);+#10861 = CARTESIAN_POINT('',(8.812749953497E-02,0.149388020833,0.97));+#10862 = SURFACE_CURVE('',#10863,(#10867,#10874),.PCURVE_S1.);+#10863 = LINE('',#10864,#10865);+#10864 = CARTESIAN_POINT('',(8.812749953497E-02,0.149388020833,1.07));+#10865 = VECTOR('',#10866,1.);+#10866 = DIRECTION('',(-0.,-0.,-1.));+#10867 = PCURVE('',#6513,#10868);+#10868 = DEFINITIONAL_REPRESENTATION('',(#10869),#10873);+#10869 = LINE('',#10870,#10871);+#10870 = CARTESIAN_POINT('',(0.,0.));+#10871 = VECTOR('',#10872,1.);+#10872 = DIRECTION('',(0.,-1.));+#10873 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10874 = PCURVE('',#6487,#10875);+#10875 = DEFINITIONAL_REPRESENTATION('',(#10876),#10880);+#10876 = LINE('',#10877,#10878);+#10877 = CARTESIAN_POINT('',(0.179113188244,0.));+#10878 = VECTOR('',#10879,1.);+#10879 = DIRECTION('',(0.,-1.));+#10880 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10881 = ORIENTED_EDGE('',*,*,#10882,.T.);+#10882 = EDGE_CURVE('',#10860,#10811,#10883,.T.);+#10883 = SURFACE_CURVE('',#10884,(#10888,#10895),.PCURVE_S1.);+#10884 = LINE('',#10885,#10886);+#10885 = CARTESIAN_POINT('',(8.812749953497E-02,0.149388020833,0.97));+#10886 = VECTOR('',#10887,1.);+#10887 = DIRECTION('',(0.,-1.,0.));+#10888 = PCURVE('',#6513,#10889);+#10889 = DEFINITIONAL_REPRESENTATION('',(#10890),#10894);+#10890 = LINE('',#10891,#10892);+#10891 = CARTESIAN_POINT('',(0.,-0.1));+#10892 = VECTOR('',#10893,1.);+#10893 = DIRECTION('',(1.,0.));+#10894 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10895 = PCURVE('',#10675,#10896);+#10896 = DEFINITIONAL_REPRESENTATION('',(#10897),#10901);+#10897 = LINE('',#10898,#10899);+#10898 = CARTESIAN_POINT('',(0.205599074591,0.284485095796));+#10899 = VECTOR('',#10900,1.);+#10900 = DIRECTION('',(0.,-1.));+#10901 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10902 = ORIENTED_EDGE('',*,*,#10810,.F.);+#10903 = ADVANCED_FACE('',(#10904),#6487,.T.);+#10904 = FACE_BOUND('',#10905,.T.);+#10905 = EDGE_LOOP('',(#10906,#10907,#10930,#10951));+#10906 = ORIENTED_EDGE('',*,*,#6472,.F.);+#10907 = ORIENTED_EDGE('',*,*,#10908,.T.);+#10908 = EDGE_CURVE('',#6447,#10909,#10911,.T.);+#10909 = VERTEX_POINT('',#10910);+#10910 = CARTESIAN_POINT('',(-9.098568870908E-02,0.149388020833,0.97));+#10911 = SURFACE_CURVE('',#10912,(#10916,#10923),.PCURVE_S1.);+#10912 = LINE('',#10913,#10914);+#10913 = CARTESIAN_POINT('',(-9.098568870908E-02,0.149388020833,1.07));+#10914 = VECTOR('',#10915,1.);+#10915 = DIRECTION('',(-0.,-0.,-1.));+#10916 = PCURVE('',#6487,#10917);+#10917 = DEFINITIONAL_REPRESENTATION('',(#10918),#10922);+#10918 = LINE('',#10919,#10920);+#10919 = CARTESIAN_POINT('',(0.,0.));+#10920 = VECTOR('',#10921,1.);+#10921 = DIRECTION('',(0.,-1.));+#10922 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10923 = PCURVE('',#6461,#10924);+#10924 = DEFINITIONAL_REPRESENTATION('',(#10925),#10929);+#10925 = LINE('',#10926,#10927);+#10926 = CARTESIAN_POINT('',(3.239281063988E-02,0.));+#10927 = VECTOR('',#10928,1.);+#10928 = DIRECTION('',(0.,-1.));+#10929 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10930 = ORIENTED_EDGE('',*,*,#10931,.T.);+#10931 = EDGE_CURVE('',#10909,#10860,#10932,.T.);+#10932 = SURFACE_CURVE('',#10933,(#10937,#10944),.PCURVE_S1.);+#10933 = LINE('',#10934,#10935);+#10934 = CARTESIAN_POINT('',(-9.098568870908E-02,0.149388020833,0.97));+#10935 = VECTOR('',#10936,1.);+#10936 = DIRECTION('',(1.,0.,0.));+#10937 = PCURVE('',#6487,#10938);+#10938 = DEFINITIONAL_REPRESENTATION('',(#10939),#10943);+#10939 = LINE('',#10940,#10941);+#10940 = CARTESIAN_POINT('',(0.,-0.1));+#10941 = VECTOR('',#10942,1.);+#10942 = DIRECTION('',(1.,0.));+#10943 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10944 = PCURVE('',#10675,#10945);+#10945 = DEFINITIONAL_REPRESENTATION('',(#10946),#10950);+#10946 = LINE('',#10947,#10948);+#10947 = CARTESIAN_POINT('',(2.648588634673E-02,0.284485095796));+#10948 = VECTOR('',#10949,1.);+#10949 = DIRECTION('',(1.,0.));+#10950 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10951 = ORIENTED_EDGE('',*,*,#10859,.F.);+#10952 = ADVANCED_FACE('',(#10953),#6461,.T.);+#10953 = FACE_BOUND('',#10954,.T.);+#10954 = EDGE_LOOP('',(#10955,#10956,#10957,#10978));+#10955 = ORIENTED_EDGE('',*,*,#6446,.F.);+#10956 = ORIENTED_EDGE('',*,*,#10687,.T.);+#10957 = ORIENTED_EDGE('',*,*,#10958,.T.);+#10958 = EDGE_CURVE('',#10660,#10909,#10959,.T.);+#10959 = SURFACE_CURVE('',#10960,(#10964,#10971),.PCURVE_S1.);+#10960 = LINE('',#10961,#10962);+#10961 = CARTESIAN_POINT('',(-9.098568870908E-02,0.116995210193,0.97));+#10962 = VECTOR('',#10963,1.);+#10963 = DIRECTION('',(0.,1.,0.));+#10964 = PCURVE('',#6461,#10965);+#10965 = DEFINITIONAL_REPRESENTATION('',(#10966),#10970);+#10966 = LINE('',#10967,#10968);+#10967 = CARTESIAN_POINT('',(0.,-0.1));+#10968 = VECTOR('',#10969,1.);+#10969 = DIRECTION('',(1.,0.));+#10970 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10971 = PCURVE('',#10675,#10972);+#10972 = DEFINITIONAL_REPRESENTATION('',(#10973),#10977);+#10973 = LINE('',#10974,#10975);+#10974 = CARTESIAN_POINT('',(2.648588634673E-02,0.252092285156));+#10975 = VECTOR('',#10976,1.);+#10976 = DIRECTION('',(0.,1.));+#10977 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10978 = ORIENTED_EDGE('',*,*,#10908,.F.);+#10979 = ADVANCED_FACE('',(#10980),#6619,.T.);+#10980 = FACE_BOUND('',#10981,.T.);+#10981 = EDGE_LOOP('',(#10982,#10983,#11006,#11034));+#10982 = ORIENTED_EDGE('',*,*,#6602,.F.);+#10983 = ORIENTED_EDGE('',*,*,#10984,.T.);+#10984 = EDGE_CURVE('',#6603,#10985,#10987,.T.);+#10985 = VERTEX_POINT('',#10986);+#10986 = CARTESIAN_POINT('',(0.164345877511,-0.135097074963,0.97));+#10987 = SURFACE_CURVE('',#10988,(#10992,#10999),.PCURVE_S1.);+#10988 = LINE('',#10989,#10990);+#10989 = CARTESIAN_POINT('',(0.164345877511,-0.135097074963,1.07));+#10990 = VECTOR('',#10991,1.);+#10991 = DIRECTION('',(-0.,-0.,-1.));+#10992 = PCURVE('',#6619,#10993);+#10993 = DEFINITIONAL_REPRESENTATION('',(#10994),#10998);+#10994 = LINE('',#10995,#10996);+#10995 = CARTESIAN_POINT('',(0.,0.));+#10996 = VECTOR('',#10997,1.);+#10997 = DIRECTION('',(0.,-1.));+#10998 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10999 = PCURVE('',#6799,#11000);+#11000 = DEFINITIONAL_REPRESENTATION('',(#11001),#11005);+#11001 = LINE('',#11002,#11003);+#11002 = CARTESIAN_POINT('',(7.692606707979E-02,0.));+#11003 = VECTOR('',#11004,1.);+#11004 = DIRECTION('',(0.,-1.));+#11005 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11006 = ORIENTED_EDGE('',*,*,#11007,.T.);+#11007 = EDGE_CURVE('',#10985,#11008,#11010,.T.);+#11008 = VERTEX_POINT('',#11009);+#11009 = CARTESIAN_POINT('',(0.124521775019,-0.135097074963,0.97));+#11010 = SURFACE_CURVE('',#11011,(#11015,#11022),.PCURVE_S1.);+#11011 = LINE('',#11012,#11013);+#11012 = CARTESIAN_POINT('',(0.164345877511,-0.135097074963,0.97));+#11013 = VECTOR('',#11014,1.);+#11014 = DIRECTION('',(-1.,0.,0.));+#11015 = PCURVE('',#6619,#11016);+#11016 = DEFINITIONAL_REPRESENTATION('',(#11017),#11021);+#11017 = LINE('',#11018,#11019);+#11018 = CARTESIAN_POINT('',(0.,-0.1));+#11019 = VECTOR('',#11020,1.);+#11020 = DIRECTION('',(1.,0.));+#11021 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11022 = PCURVE('',#11023,#11028);+#11023 = PLANE('',#11024);+#11024 = AXIS2_PLACEMENT_3D('',#11025,#11026,#11027);+#11025 = CARTESIAN_POINT('',(0.117471575056,-0.135097074963,0.97));+#11026 = DIRECTION('',(0.,0.,1.));+#11027 = DIRECTION('',(1.,0.,0.));+#11028 = DEFINITIONAL_REPRESENTATION('',(#11029),#11033);+#11029 = LINE('',#11030,#11031);+#11030 = CARTESIAN_POINT('',(4.687430245536E-02,0.));+#11031 = VECTOR('',#11032,1.);+#11032 = DIRECTION('',(-1.,0.));+#11033 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11034 = ORIENTED_EDGE('',*,*,#11035,.F.);+#11035 = EDGE_CURVE('',#6605,#11008,#11036,.T.);+#11036 = SURFACE_CURVE('',#11037,(#11041,#11048),.PCURVE_S1.);+#11037 = LINE('',#11038,#11039);+#11038 = CARTESIAN_POINT('',(0.124521775019,-0.135097074963,1.07));+#11039 = VECTOR('',#11040,1.);+#11040 = DIRECTION('',(-0.,-0.,-1.));+#11041 = PCURVE('',#6619,#11042);+#11042 = DEFINITIONAL_REPRESENTATION('',(#11043),#11047);+#11043 = LINE('',#11044,#11045);+#11044 = CARTESIAN_POINT('',(3.982410249256E-02,0.));+#11045 = VECTOR('',#11046,1.);+#11046 = DIRECTION('',(0.,-1.));+#11047 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11048 = PCURVE('',#6645,#11049);+#11049 = DEFINITIONAL_REPRESENTATION('',(#11050),#11054);+#11050 = LINE('',#11051,#11052);+#11051 = CARTESIAN_POINT('',(0.,0.));+#11052 = VECTOR('',#11053,1.);+#11053 = DIRECTION('',(0.,-1.));+#11054 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11055 = ADVANCED_FACE('',(#11056),#6799,.T.);+#11056 = FACE_BOUND('',#11057,.T.);+#11057 = EDGE_LOOP('',(#11058,#11059,#11082,#11103));+#11058 = ORIENTED_EDGE('',*,*,#6786,.F.);+#11059 = ORIENTED_EDGE('',*,*,#11060,.T.);+#11060 = EDGE_CURVE('',#6761,#11061,#11063,.T.);+#11061 = VERTEX_POINT('',#11062);+#11062 = CARTESIAN_POINT('',(0.184924839565,-6.097470238095E-02,0.97));+#11063 = SURFACE_CURVE('',#11064,(#11068,#11075),.PCURVE_S1.);+#11064 = LINE('',#11065,#11066);+#11065 = CARTESIAN_POINT('',(0.184924839565,-6.097470238095E-02,1.07));+#11066 = VECTOR('',#11067,1.);+#11067 = DIRECTION('',(-0.,-0.,-1.));+#11068 = PCURVE('',#6799,#11069);+#11069 = DEFINITIONAL_REPRESENTATION('',(#11070),#11074);+#11070 = LINE('',#11071,#11072);+#11071 = CARTESIAN_POINT('',(0.,0.));+#11072 = VECTOR('',#11073,1.);+#11073 = DIRECTION('',(0.,-1.));+#11074 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11075 = PCURVE('',#6775,#11076);+#11076 = DEFINITIONAL_REPRESENTATION('',(#11077),#11081);+#11077 = LINE('',#11078,#11079);+#11078 = CARTESIAN_POINT('',(9.965552920387E-02,0.));+#11079 = VECTOR('',#11080,1.);+#11080 = DIRECTION('',(0.,-1.));+#11081 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11082 = ORIENTED_EDGE('',*,*,#11083,.T.);+#11083 = EDGE_CURVE('',#11061,#10985,#11084,.T.);+#11084 = SURFACE_CURVE('',#11085,(#11089,#11096),.PCURVE_S1.);+#11085 = LINE('',#11086,#11087);+#11086 = CARTESIAN_POINT('',(0.184924839565,-6.097470238095E-02,0.97));+#11087 = VECTOR('',#11088,1.);+#11088 = DIRECTION('',(-0.2675161078,-0.963553388281,0.));+#11089 = PCURVE('',#6799,#11090);+#11090 = DEFINITIONAL_REPRESENTATION('',(#11091),#11095);+#11091 = LINE('',#11092,#11093);+#11092 = CARTESIAN_POINT('',(-0.,-0.1));+#11093 = VECTOR('',#11094,1.);+#11094 = DIRECTION('',(1.,0.));+#11095 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11096 = PCURVE('',#11023,#11097);+#11097 = DEFINITIONAL_REPRESENTATION('',(#11098),#11102);+#11098 = LINE('',#11099,#11100);+#11099 = CARTESIAN_POINT('',(6.745326450893E-02,7.412237258185E-02));+#11100 = VECTOR('',#11101,1.);+#11101 = DIRECTION('',(-0.2675161078,-0.963553388281));+#11102 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11103 = ORIENTED_EDGE('',*,*,#10984,.F.);+#11104 = ADVANCED_FACE('',(#11105),#6775,.T.);+#11105 = FACE_BOUND('',#11106,.T.);+#11106 = EDGE_LOOP('',(#11107,#11108,#11131,#11152));+#11107 = ORIENTED_EDGE('',*,*,#6760,.F.);+#11108 = ORIENTED_EDGE('',*,*,#11109,.T.);+#11109 = EDGE_CURVE('',#6735,#11110,#11112,.T.);+#11110 = VERTEX_POINT('',#11111);+#11111 = CARTESIAN_POINT('',(0.284580368769,-6.097470238095E-02,0.97));+#11112 = SURFACE_CURVE('',#11113,(#11117,#11124),.PCURVE_S1.);+#11113 = LINE('',#11114,#11115);+#11114 = CARTESIAN_POINT('',(0.284580368769,-6.097470238095E-02,1.07));+#11115 = VECTOR('',#11116,1.);+#11116 = DIRECTION('',(-0.,-0.,-1.));+#11117 = PCURVE('',#6775,#11118);+#11118 = DEFINITIONAL_REPRESENTATION('',(#11119),#11123);+#11119 = LINE('',#11120,#11121);+#11120 = CARTESIAN_POINT('',(0.,0.));+#11121 = VECTOR('',#11122,1.);+#11122 = DIRECTION('',(0.,-1.));+#11123 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11124 = PCURVE('',#6749,#11125);+#11125 = DEFINITIONAL_REPRESENTATION('',(#11126),#11130);+#11126 = LINE('',#11127,#11128);+#11127 = CARTESIAN_POINT('',(7.702889054423E-02,0.));+#11128 = VECTOR('',#11129,1.);+#11129 = DIRECTION('',(0.,-1.));+#11130 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11131 = ORIENTED_EDGE('',*,*,#11132,.T.);+#11132 = EDGE_CURVE('',#11110,#11061,#11133,.T.);+#11133 = SURFACE_CURVE('',#11134,(#11138,#11145),.PCURVE_S1.);+#11134 = LINE('',#11135,#11136);+#11135 = CARTESIAN_POINT('',(0.284580368769,-6.097470238095E-02,0.97));+#11136 = VECTOR('',#11137,1.);+#11137 = DIRECTION('',(-1.,0.,0.));+#11138 = PCURVE('',#6775,#11139);+#11139 = DEFINITIONAL_REPRESENTATION('',(#11140),#11144);+#11140 = LINE('',#11141,#11142);+#11141 = CARTESIAN_POINT('',(0.,-0.1));+#11142 = VECTOR('',#11143,1.);+#11143 = DIRECTION('',(1.,0.));+#11144 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11145 = PCURVE('',#11023,#11146);+#11146 = DEFINITIONAL_REPRESENTATION('',(#11147),#11151);+#11147 = LINE('',#11148,#11149);+#11148 = CARTESIAN_POINT('',(0.167108793713,7.412237258185E-02));+#11149 = VECTOR('',#11150,1.);+#11150 = DIRECTION('',(-1.,0.));+#11151 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11152 = ORIENTED_EDGE('',*,*,#11060,.F.);+#11153 = ADVANCED_FACE('',(#11154),#6749,.T.);+#11154 = FACE_BOUND('',#11155,.T.);+#11155 = EDGE_LOOP('',(#11156,#11157,#11180,#11201));+#11156 = ORIENTED_EDGE('',*,*,#6734,.F.);+#11157 = ORIENTED_EDGE('',*,*,#11158,.T.);+#11158 = EDGE_CURVE('',#6709,#11159,#11161,.T.);+#11159 = VERTEX_POINT('',#11160);+#11160 = CARTESIAN_POINT('',(0.305540422712,-0.135097074963,0.97));+#11161 = SURFACE_CURVE('',#11162,(#11166,#11173),.PCURVE_S1.);+#11162 = LINE('',#11163,#11164);+#11163 = CARTESIAN_POINT('',(0.305540422712,-0.135097074963,1.07));+#11164 = VECTOR('',#11165,1.);+#11165 = DIRECTION('',(-0.,-0.,-1.));+#11166 = PCURVE('',#6749,#11167);+#11167 = DEFINITIONAL_REPRESENTATION('',(#11168),#11172);+#11168 = LINE('',#11169,#11170);+#11169 = CARTESIAN_POINT('',(0.,0.));+#11170 = VECTOR('',#11171,1.);+#11171 = DIRECTION('',(0.,-1.));+#11172 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11173 = PCURVE('',#6723,#11174);+#11174 = DEFINITIONAL_REPRESENTATION('',(#11175),#11179);+#11175 = LINE('',#11176,#11177);+#11176 = CARTESIAN_POINT('',(3.982410249256E-02,0.));+#11177 = VECTOR('',#11178,1.);+#11178 = DIRECTION('',(0.,-1.));+#11179 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11180 = ORIENTED_EDGE('',*,*,#11181,.T.);+#11181 = EDGE_CURVE('',#11159,#11110,#11182,.T.);+#11182 = SURFACE_CURVE('',#11183,(#11187,#11194),.PCURVE_S1.);+#11183 = LINE('',#11184,#11185);+#11184 = CARTESIAN_POINT('',(0.305540422712,-0.135097074963,0.97));+#11185 = VECTOR('',#11186,1.);+#11186 = DIRECTION('',(-0.272106397942,0.962267170904,0.));+#11187 = PCURVE('',#6749,#11188);+#11188 = DEFINITIONAL_REPRESENTATION('',(#11189),#11193);+#11189 = LINE('',#11190,#11191);+#11190 = CARTESIAN_POINT('',(0.,-0.1));+#11191 = VECTOR('',#11192,1.);+#11192 = DIRECTION('',(1.,0.));+#11193 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11194 = PCURVE('',#11023,#11195);+#11195 = DEFINITIONAL_REPRESENTATION('',(#11196),#11200);+#11196 = LINE('',#11197,#11198);+#11197 = CARTESIAN_POINT('',(0.188068847656,0.));+#11198 = VECTOR('',#11199,1.);+#11199 = DIRECTION('',(-0.272106397942,0.962267170904));+#11200 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11201 = ORIENTED_EDGE('',*,*,#11109,.F.);+#11202 = ADVANCED_FACE('',(#11203),#6723,.T.);+#11203 = FACE_BOUND('',#11204,.T.);+#11204 = EDGE_LOOP('',(#11205,#11206,#11229,#11250));+#11205 = ORIENTED_EDGE('',*,*,#6708,.F.);+#11206 = ORIENTED_EDGE('',*,*,#11207,.T.);+#11207 = EDGE_CURVE('',#6683,#11208,#11210,.T.);+#11208 = VERTEX_POINT('',#11209);+#11209 = CARTESIAN_POINT('',(0.345364525205,-0.135097074963,0.97));+#11210 = SURFACE_CURVE('',#11211,(#11215,#11222),.PCURVE_S1.);+#11211 = LINE('',#11212,#11213);+#11212 = CARTESIAN_POINT('',(0.345364525205,-0.135097074963,1.07));+#11213 = VECTOR('',#11214,1.);+#11214 = DIRECTION('',(-0.,-0.,-1.));+#11215 = PCURVE('',#6723,#11216);+#11216 = DEFINITIONAL_REPRESENTATION('',(#11217),#11221);+#11217 = LINE('',#11218,#11219);+#11218 = CARTESIAN_POINT('',(0.,0.));+#11219 = VECTOR('',#11220,1.);+#11220 = DIRECTION('',(0.,-1.));+#11221 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11222 = PCURVE('',#6697,#11223);+#11223 = DEFINITIONAL_REPRESENTATION('',(#11224),#11228);+#11224 = LINE('',#11225,#11226);+#11225 = CARTESIAN_POINT('',(0.297514047567,0.));+#11226 = VECTOR('',#11227,1.);+#11227 = DIRECTION('',(0.,-1.));+#11228 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11229 = ORIENTED_EDGE('',*,*,#11230,.T.);+#11230 = EDGE_CURVE('',#11208,#11159,#11231,.T.);+#11231 = SURFACE_CURVE('',#11232,(#11236,#11243),.PCURVE_S1.);+#11232 = LINE('',#11233,#11234);+#11233 = CARTESIAN_POINT('',(0.345364525205,-0.135097074963,0.97));+#11234 = VECTOR('',#11235,1.);+#11235 = DIRECTION('',(-1.,0.,0.));+#11236 = PCURVE('',#6723,#11237);+#11237 = DEFINITIONAL_REPRESENTATION('',(#11238),#11242);+#11238 = LINE('',#11239,#11240);+#11239 = CARTESIAN_POINT('',(0.,-0.1));+#11240 = VECTOR('',#11241,1.);+#11241 = DIRECTION('',(1.,0.));+#11242 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11243 = PCURVE('',#11023,#11244);+#11244 = DEFINITIONAL_REPRESENTATION('',(#11245),#11249);+#11245 = LINE('',#11246,#11247);+#11246 = CARTESIAN_POINT('',(0.227892950149,0.));+#11247 = VECTOR('',#11248,1.);+#11248 = DIRECTION('',(-1.,0.));+#11249 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11250 = ORIENTED_EDGE('',*,*,#11158,.F.);+#11251 = ADVANCED_FACE('',(#11252),#6697,.T.);+#11252 = FACE_BOUND('',#11253,.T.);+#11253 = EDGE_LOOP('',(#11254,#11255,#11278,#11299));+#11254 = ORIENTED_EDGE('',*,*,#6682,.F.);+#11255 = ORIENTED_EDGE('',*,*,#11256,.T.);+#11256 = EDGE_CURVE('',#6657,#11257,#11259,.T.);+#11257 = VERTEX_POINT('',#11258);+#11258 = CARTESIAN_POINT('',(0.258285028367,0.149388020833,0.97));+#11259 = SURFACE_CURVE('',#11260,(#11264,#11271),.PCURVE_S1.);+#11260 = LINE('',#11261,#11262);+#11261 = CARTESIAN_POINT('',(0.258285028367,0.149388020833,1.07));+#11262 = VECTOR('',#11263,1.);+#11263 = DIRECTION('',(-0.,-0.,-1.));+#11264 = PCURVE('',#6697,#11265);+#11265 = DEFINITIONAL_REPRESENTATION('',(#11266),#11270);+#11266 = LINE('',#11267,#11268);+#11267 = CARTESIAN_POINT('',(0.,0.));+#11268 = VECTOR('',#11269,1.);+#11269 = DIRECTION('',(0.,-1.));+#11270 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11271 = PCURVE('',#6671,#11272);+#11272 = DEFINITIONAL_REPRESENTATION('',(#11273),#11277);+#11273 = LINE('',#11274,#11275);+#11274 = CARTESIAN_POINT('',(4.668375651042E-02,0.));+#11275 = VECTOR('',#11276,1.);+#11276 = DIRECTION('',(0.,-1.));+#11277 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11278 = ORIENTED_EDGE('',*,*,#11279,.T.);+#11279 = EDGE_CURVE('',#11257,#11208,#11280,.T.);+#11280 = SURFACE_CURVE('',#11281,(#11285,#11292),.PCURVE_S1.);+#11281 = LINE('',#11282,#11283);+#11282 = CARTESIAN_POINT('',(0.258285028367,0.149388020833,0.97));+#11283 = VECTOR('',#11284,1.);+#11284 = DIRECTION('',(0.292690370589,-0.956207271968,0.));+#11285 = PCURVE('',#6697,#11286);+#11286 = DEFINITIONAL_REPRESENTATION('',(#11287),#11291);+#11287 = LINE('',#11288,#11289);+#11288 = CARTESIAN_POINT('',(0.,-0.1));+#11289 = VECTOR('',#11290,1.);+#11290 = DIRECTION('',(1.,0.));+#11291 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11292 = PCURVE('',#11023,#11293);+#11293 = DEFINITIONAL_REPRESENTATION('',(#11294),#11298);+#11294 = LINE('',#11295,#11296);+#11295 = CARTESIAN_POINT('',(0.140813453311,0.284485095796));+#11296 = VECTOR('',#11297,1.);+#11297 = DIRECTION('',(0.292690370589,-0.956207271968));+#11298 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11299 = ORIENTED_EDGE('',*,*,#11207,.F.);+#11300 = ADVANCED_FACE('',(#11301),#6671,.T.);+#11301 = FACE_BOUND('',#11302,.T.);+#11302 = EDGE_LOOP('',(#11303,#11304,#11327,#11348));+#11303 = ORIENTED_EDGE('',*,*,#6656,.F.);+#11304 = ORIENTED_EDGE('',*,*,#11305,.T.);+#11305 = EDGE_CURVE('',#6631,#11306,#11308,.T.);+#11306 = VERTEX_POINT('',#11307);+#11307 = CARTESIAN_POINT('',(0.211601271856,0.149388020833,0.97));+#11308 = SURFACE_CURVE('',#11309,(#11313,#11320),.PCURVE_S1.);+#11309 = LINE('',#11310,#11311);+#11310 = CARTESIAN_POINT('',(0.211601271856,0.149388020833,1.07));+#11311 = VECTOR('',#11312,1.);+#11312 = DIRECTION('',(-0.,-0.,-1.));+#11313 = PCURVE('',#6671,#11314);+#11314 = DEFINITIONAL_REPRESENTATION('',(#11315),#11319);+#11315 = LINE('',#11316,#11317);+#11316 = CARTESIAN_POINT('',(0.,0.));+#11317 = VECTOR('',#11318,1.);+#11318 = DIRECTION('',(0.,-1.));+#11319 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11320 = PCURVE('',#6645,#11321);+#11321 = DEFINITIONAL_REPRESENTATION('',(#11322),#11326);+#11322 = LINE('',#11323,#11324);+#11323 = CARTESIAN_POINT('',(0.297514047567,0.));+#11324 = VECTOR('',#11325,1.);+#11325 = DIRECTION('',(0.,-1.));+#11326 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11327 = ORIENTED_EDGE('',*,*,#11328,.T.);+#11328 = EDGE_CURVE('',#11306,#11257,#11329,.T.);+#11329 = SURFACE_CURVE('',#11330,(#11334,#11341),.PCURVE_S1.);+#11330 = LINE('',#11331,#11332);+#11331 = CARTESIAN_POINT('',(0.211601271856,0.149388020833,0.97));+#11332 = VECTOR('',#11333,1.);+#11333 = DIRECTION('',(1.,0.,0.));+#11334 = PCURVE('',#6671,#11335);+#11335 = DEFINITIONAL_REPRESENTATION('',(#11336),#11340);+#11336 = LINE('',#11337,#11338);+#11337 = CARTESIAN_POINT('',(0.,-0.1));+#11338 = VECTOR('',#11339,1.);+#11339 = DIRECTION('',(1.,0.));+#11340 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11341 = PCURVE('',#11023,#11342);+#11342 = DEFINITIONAL_REPRESENTATION('',(#11343),#11347);+#11343 = LINE('',#11344,#11345);+#11344 = CARTESIAN_POINT('',(9.41296968006E-02,0.284485095796));+#11345 = VECTOR('',#11346,1.);+#11346 = DIRECTION('',(1.,0.));+#11347 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11348 = ORIENTED_EDGE('',*,*,#11256,.F.);+#11349 = ADVANCED_FACE('',(#11350),#6645,.T.);+#11350 = FACE_BOUND('',#11351,.T.);+#11351 = EDGE_LOOP('',(#11352,#11353,#11354,#11375));+#11352 = ORIENTED_EDGE('',*,*,#6630,.F.);+#11353 = ORIENTED_EDGE('',*,*,#11035,.T.);+#11354 = ORIENTED_EDGE('',*,*,#11355,.T.);+#11355 = EDGE_CURVE('',#11008,#11306,#11356,.T.);+#11356 = SURFACE_CURVE('',#11357,(#11361,#11368),.PCURVE_S1.);+#11357 = LINE('',#11358,#11359);+#11358 = CARTESIAN_POINT('',(0.124521775019,-0.135097074963,0.97));+#11359 = VECTOR('',#11360,1.);+#11360 = DIRECTION('',(0.292690370589,0.956207271968,0.));+#11361 = PCURVE('',#6645,#11362);+#11362 = DEFINITIONAL_REPRESENTATION('',(#11363),#11367);+#11363 = LINE('',#11364,#11365);+#11364 = CARTESIAN_POINT('',(0.,-0.1));+#11365 = VECTOR('',#11366,1.);+#11366 = DIRECTION('',(1.,0.));+#11367 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11368 = PCURVE('',#11023,#11369);+#11369 = DEFINITIONAL_REPRESENTATION('',(#11370),#11374);+#11370 = LINE('',#11371,#11372);+#11371 = CARTESIAN_POINT('',(7.050199962798E-03,0.));+#11372 = VECTOR('',#11373,1.);+#11373 = DIRECTION('',(0.292690370589,0.956207271968));+#11374 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11375 = ORIENTED_EDGE('',*,*,#11305,.F.);+#11376 = ADVANCED_FACE('',(#11377),#6834,.T.);+#11377 = FACE_BOUND('',#11378,.T.);+#11378 = EDGE_LOOP('',(#11379,#11380,#11403,#11431));+#11379 = ORIENTED_EDGE('',*,*,#6812,.T.);+#11380 = ORIENTED_EDGE('',*,*,#11381,.T.);+#11381 = EDGE_CURVE('',#6815,#11382,#11384,.T.);+#11382 = VERTEX_POINT('',#11383);+#11383 = CARTESIAN_POINT('',(0.4246316383,-0.137669445219,0.97));+#11384 = SURFACE_CURVE('',#11385,(#11389,#11396),.PCURVE_S1.);+#11385 = LINE('',#11386,#11387);+#11386 = CARTESIAN_POINT('',(0.4246316383,-0.137669445219,1.07));+#11387 = VECTOR('',#11388,1.);+#11388 = DIRECTION('',(-0.,-0.,-1.));+#11389 = PCURVE('',#6834,#11390);+#11390 = DEFINITIONAL_REPRESENTATION('',(#11391),#11395);+#11391 = LINE('',#11392,#11393);+#11392 = CARTESIAN_POINT('',(0.,0.));+#11393 = VECTOR('',#11394,1.);+#11394 = DIRECTION('',(0.,-1.));+#11395 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11396 = PCURVE('',#7443,#11397);+#11397 = DEFINITIONAL_REPRESENTATION('',(#11398),#11402);+#11398 = LINE('',#11399,#11400);+#11399 = CARTESIAN_POINT('',(1.,0.));+#11400 = VECTOR('',#11401,1.);+#11401 = DIRECTION('',(0.,-1.));+#11402 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11403 = ORIENTED_EDGE('',*,*,#11404,.T.);+#11404 = EDGE_CURVE('',#11382,#11405,#11407,.T.);+#11405 = VERTEX_POINT('',#11406);+#11406 = CARTESIAN_POINT('',(0.397383568173,-0.12919015067,0.97));+#11407 = SURFACE_CURVE('',#11408,(#11412,#11419),.PCURVE_S1.);+#11408 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11409,#11410,#11411),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11409 = CARTESIAN_POINT('',(0.4246316383,-0.137669445219,0.97));+#11410 = CARTESIAN_POINT('',(0.410531238374,-0.134715983073,0.97));+#11411 = CARTESIAN_POINT('',(0.397383568173,-0.12919015067,0.97));+#11412 = PCURVE('',#6834,#11413);+#11413 = DEFINITIONAL_REPRESENTATION('',(#11414),#11418);+#11414 = LINE('',#11415,#11416);+#11415 = CARTESIAN_POINT('',(0.,-0.1));+#11416 = VECTOR('',#11417,1.);+#11417 = DIRECTION('',(1.,0.));+#11418 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11419 = PCURVE('',#11420,#11425);+#11420 = PLANE('',#11421);+#11421 = AXIS2_PLACEMENT_3D('',#11422,#11423,#11424);+#11422 = CARTESIAN_POINT('',(0.352414725167,-0.135097074963,0.97));+#11423 = DIRECTION('',(0.,0.,1.));+#11424 = DIRECTION('',(1.,0.,0.));+#11425 = DEFINITIONAL_REPRESENTATION('',(#11426),#11430);+#11426 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11427,#11428,#11429),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11427 = CARTESIAN_POINT('',(7.221691313244E-02,-2.572370256696E-03));+#11428 = CARTESIAN_POINT('',(5.811651320685E-02,3.81091889881E-04));+#11429 = CARTESIAN_POINT('',(4.496884300595E-02,5.906924293155E-03));+#11430 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11431 = ORIENTED_EDGE('',*,*,#11432,.F.);+#11432 = EDGE_CURVE('',#6813,#11405,#11433,.T.);+#11433 = SURFACE_CURVE('',#11434,(#11438,#11445),.PCURVE_S1.);+#11434 = LINE('',#11435,#11436);+#11435 = CARTESIAN_POINT('',(0.397383568173,-0.12919015067,1.07));+#11436 = VECTOR('',#11437,1.);+#11437 = DIRECTION('',(-0.,-0.,-1.));+#11438 = PCURVE('',#6834,#11439);+#11439 = DEFINITIONAL_REPRESENTATION('',(#11440),#11444);+#11440 = LINE('',#11441,#11442);+#11441 = CARTESIAN_POINT('',(1.,0.));+#11442 = VECTOR('',#11443,1.);+#11443 = DIRECTION('',(0.,-1.));+#11444 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11445 = PCURVE('',#6865,#11446);+#11446 = DEFINITIONAL_REPRESENTATION('',(#11447),#11451);+#11447 = LINE('',#11448,#11449);+#11448 = CARTESIAN_POINT('',(0.,0.));+#11449 = VECTOR('',#11450,1.);+#11450 = DIRECTION('',(0.,-1.));+#11451 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11452 = ADVANCED_FACE('',(#11453),#7443,.T.);+#11453 = FACE_BOUND('',#11454,.T.);+#11454 = EDGE_LOOP('',(#11455,#11456,#11479,#11500));+#11455 = ORIENTED_EDGE('',*,*,#7425,.T.);+#11456 = ORIENTED_EDGE('',*,*,#11457,.T.);+#11457 = EDGE_CURVE('',#7390,#11458,#11460,.T.);+#11458 = VERTEX_POINT('',#11459);+#11459 = CARTESIAN_POINT('',(0.452641892206,-0.140622907366,0.97));+#11460 = SURFACE_CURVE('',#11461,(#11465,#11472),.PCURVE_S1.);+#11461 = LINE('',#11462,#11463);+#11462 = CARTESIAN_POINT('',(0.452641892206,-0.140622907366,1.07));+#11463 = VECTOR('',#11464,1.);+#11464 = DIRECTION('',(-0.,-0.,-1.));+#11465 = PCURVE('',#7443,#11466);+#11466 = DEFINITIONAL_REPRESENTATION('',(#11467),#11471);+#11467 = LINE('',#11468,#11469);+#11468 = CARTESIAN_POINT('',(0.,0.));+#11469 = VECTOR('',#11470,1.);+#11470 = DIRECTION('',(0.,-1.));+#11471 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11472 = PCURVE('',#7409,#11473);+#11473 = DEFINITIONAL_REPRESENTATION('',(#11474),#11478);+#11474 = LINE('',#11475,#11476);+#11475 = CARTESIAN_POINT('',(1.,0.));+#11476 = VECTOR('',#11477,1.);+#11477 = DIRECTION('',(0.,-1.));+#11478 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11479 = ORIENTED_EDGE('',*,*,#11480,.T.);+#11480 = EDGE_CURVE('',#11458,#11382,#11481,.T.);+#11481 = SURFACE_CURVE('',#11482,(#11486,#11493),.PCURVE_S1.);+#11482 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11483,#11484,#11485),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11483 = CARTESIAN_POINT('',(0.452641892206,-0.140622907366,0.97));+#11484 = CARTESIAN_POINT('',(0.438732038225,-0.140622907366,0.97));+#11485 = CARTESIAN_POINT('',(0.4246316383,-0.137669445219,0.97));+#11486 = PCURVE('',#7443,#11487);+#11487 = DEFINITIONAL_REPRESENTATION('',(#11488),#11492);+#11488 = LINE('',#11489,#11490);+#11489 = CARTESIAN_POINT('',(0.,-0.1));+#11490 = VECTOR('',#11491,1.);+#11491 = DIRECTION('',(1.,0.));+#11492 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11493 = PCURVE('',#11420,#11494);+#11494 = DEFINITIONAL_REPRESENTATION('',(#11495),#11499);+#11495 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11496,#11497,#11498),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11496 = CARTESIAN_POINT('',(0.100227167039,-5.525832403274E-03));+#11497 = CARTESIAN_POINT('',(8.631731305804E-02,-5.525832403274E-03));+#11498 = CARTESIAN_POINT('',(7.221691313244E-02,-2.572370256696E-03));+#11499 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11500 = ORIENTED_EDGE('',*,*,#11381,.F.);+#11501 = ADVANCED_FACE('',(#11502),#7409,.T.);+#11502 = FACE_BOUND('',#11503,.T.);+#11503 = EDGE_LOOP('',(#11504,#11505,#11528,#11549));+#11504 = ORIENTED_EDGE('',*,*,#7389,.T.);+#11505 = ORIENTED_EDGE('',*,*,#11506,.T.);+#11506 = EDGE_CURVE('',#7354,#11507,#11509,.T.);+#11507 = VERTEX_POINT('',#11508);+#11508 = CARTESIAN_POINT('',(0.533147553943,-0.102799537295,0.97));+#11509 = SURFACE_CURVE('',#11510,(#11514,#11521),.PCURVE_S1.);+#11510 = LINE('',#11511,#11512);+#11511 = CARTESIAN_POINT('',(0.533147553943,-0.102799537295,1.07));+#11512 = VECTOR('',#11513,1.);+#11513 = DIRECTION('',(-0.,-0.,-1.));+#11514 = PCURVE('',#7409,#11515);+#11515 = DEFINITIONAL_REPRESENTATION('',(#11516),#11520);+#11516 = LINE('',#11517,#11518);+#11517 = CARTESIAN_POINT('',(0.,0.));+#11518 = VECTOR('',#11519,1.);+#11519 = DIRECTION('',(0.,-1.));+#11520 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11521 = PCURVE('',#7373,#11522);+#11522 = DEFINITIONAL_REPRESENTATION('',(#11523),#11527);+#11523 = LINE('',#11524,#11525);+#11524 = CARTESIAN_POINT('',(1.,0.));+#11525 = VECTOR('',#11526,1.);+#11526 = DIRECTION('',(0.,-1.));+#11527 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11528 = ORIENTED_EDGE('',*,*,#11529,.T.);+#11529 = EDGE_CURVE('',#11507,#11458,#11530,.T.);+#11530 = SURFACE_CURVE('',#11531,(#11535,#11542),.PCURVE_S1.);+#11531 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11532,#11533,#11534),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11532 = CARTESIAN_POINT('',(0.533147553943,-0.102799537295,0.97));+#11533 = CARTESIAN_POINT('',(0.505423118955,-0.140622907366,0.97));+#11534 = CARTESIAN_POINT('',(0.452641892206,-0.140622907366,0.97));+#11535 = PCURVE('',#7409,#11536);+#11536 = DEFINITIONAL_REPRESENTATION('',(#11537),#11541);+#11537 = LINE('',#11538,#11539);+#11538 = CARTESIAN_POINT('',(0.,-0.1));+#11539 = VECTOR('',#11540,1.);+#11540 = DIRECTION('',(1.,0.));+#11541 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11542 = PCURVE('',#11420,#11543);+#11543 = DEFINITIONAL_REPRESENTATION('',(#11544),#11548);+#11544 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11545,#11546,#11547),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11545 = CARTESIAN_POINT('',(0.180732828776,3.229753766741E-02));+#11546 = CARTESIAN_POINT('',(0.153008393787,-5.525832403274E-03));+#11547 = CARTESIAN_POINT('',(0.100227167039,-5.525832403274E-03));+#11548 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11549 = ORIENTED_EDGE('',*,*,#11457,.F.);+#11550 = ADVANCED_FACE('',(#11551),#7373,.T.);+#11551 = FACE_BOUND('',#11552,.T.);+#11552 = EDGE_LOOP('',(#11553,#11554,#11577,#11598));+#11553 = ORIENTED_EDGE('',*,*,#7353,.T.);+#11554 = ORIENTED_EDGE('',*,*,#11555,.T.);+#11555 = EDGE_CURVE('',#7318,#11556,#11558,.T.);+#11556 = VERTEX_POINT('',#11557);+#11557 = CARTESIAN_POINT('',(0.560871988932,6.859654017857E-03,0.97));+#11558 = SURFACE_CURVE('',#11559,(#11563,#11570),.PCURVE_S1.);+#11559 = LINE('',#11560,#11561);+#11560 = CARTESIAN_POINT('',(0.560871988932,6.859654017857E-03,1.07));+#11561 = VECTOR('',#11562,1.);+#11562 = DIRECTION('',(-0.,-0.,-1.));+#11563 = PCURVE('',#7373,#11564);+#11564 = DEFINITIONAL_REPRESENTATION('',(#11565),#11569);+#11565 = LINE('',#11566,#11567);+#11566 = CARTESIAN_POINT('',(0.,0.));+#11567 = VECTOR('',#11568,1.);+#11568 = DIRECTION('',(0.,-1.));+#11569 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11570 = PCURVE('',#7337,#11571);+#11571 = DEFINITIONAL_REPRESENTATION('',(#11572),#11576);+#11572 = LINE('',#11573,#11574);+#11573 = CARTESIAN_POINT('',(1.,0.));+#11574 = VECTOR('',#11575,1.);+#11575 = DIRECTION('',(0.,-1.));+#11576 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11577 = ORIENTED_EDGE('',*,*,#11578,.T.);+#11578 = EDGE_CURVE('',#11556,#11507,#11579,.T.);+#11579 = SURFACE_CURVE('',#11580,(#11584,#11591),.PCURVE_S1.);+#11580 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11581,#11582,#11583),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11581 = CARTESIAN_POINT('',(0.560871988932,6.859654017857E-03,0.97));+#11582 = CARTESIAN_POINT('',(0.560871988932,-6.49761672247E-02,0.97));+#11583 = CARTESIAN_POINT('',(0.533147553943,-0.102799537295,0.97));+#11584 = PCURVE('',#7373,#11585);+#11585 = DEFINITIONAL_REPRESENTATION('',(#11586),#11590);+#11586 = LINE('',#11587,#11588);+#11587 = CARTESIAN_POINT('',(0.,-0.1));+#11588 = VECTOR('',#11589,1.);+#11589 = DIRECTION('',(1.,0.));+#11590 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11591 = PCURVE('',#11420,#11592);+#11592 = DEFINITIONAL_REPRESENTATION('',(#11593),#11597);+#11593 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11594,#11595,#11596),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11594 = CARTESIAN_POINT('',(0.208457263765,0.141956728981));+#11595 = CARTESIAN_POINT('',(0.208457263765,7.01209077381E-02));+#11596 = CARTESIAN_POINT('',(0.180732828776,3.229753766741E-02));+#11597 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11598 = ORIENTED_EDGE('',*,*,#11506,.F.);+#11599 = ADVANCED_FACE('',(#11600),#7337,.T.);+#11600 = FACE_BOUND('',#11601,.T.);+#11601 = EDGE_LOOP('',(#11602,#11603,#11626,#11647));+#11602 = ORIENTED_EDGE('',*,*,#7317,.T.);+#11603 = ORIENTED_EDGE('',*,*,#11604,.T.);+#11604 = EDGE_CURVE('',#7273,#11605,#11607,.T.);+#11605 = VERTEX_POINT('',#11606);+#11606 = CARTESIAN_POINT('',(0.537815929594,0.118900669643,0.97));+#11607 = SURFACE_CURVE('',#11608,(#11612,#11619),.PCURVE_S1.);+#11608 = LINE('',#11609,#11610);+#11609 = CARTESIAN_POINT('',(0.537815929594,0.118900669643,1.07));+#11610 = VECTOR('',#11611,1.);+#11611 = DIRECTION('',(-0.,-0.,-1.));+#11612 = PCURVE('',#7337,#11613);+#11613 = DEFINITIONAL_REPRESENTATION('',(#11614),#11618);+#11614 = LINE('',#11615,#11616);+#11615 = CARTESIAN_POINT('',(0.,0.));+#11616 = VECTOR('',#11617,1.);+#11617 = DIRECTION('',(0.,-1.));+#11618 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11619 = PCURVE('',#7298,#11620);+#11620 = DEFINITIONAL_REPRESENTATION('',(#11621),#11625);+#11621 = LINE('',#11622,#11623);+#11622 = CARTESIAN_POINT('',(1.,0.));+#11623 = VECTOR('',#11624,1.);+#11624 = DIRECTION('',(0.,-1.));+#11625 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11626 = ORIENTED_EDGE('',*,*,#11627,.T.);+#11627 = EDGE_CURVE('',#11605,#11556,#11628,.T.);+#11628 = SURFACE_CURVE('',#11629,(#11633,#11640),.PCURVE_S1.);+#11629 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11630,#11631,#11632),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11630 = CARTESIAN_POINT('',(0.537815929594,0.118900669643,0.97));+#11631 = CARTESIAN_POINT('',(0.560871988932,8.326857793899E-02,0.97));+#11632 = CARTESIAN_POINT('',(0.560871988932,6.859654017857E-03,0.97));+#11633 = PCURVE('',#7337,#11634);+#11634 = DEFINITIONAL_REPRESENTATION('',(#11635),#11639);+#11635 = LINE('',#11636,#11637);+#11636 = CARTESIAN_POINT('',(0.,-0.1));+#11637 = VECTOR('',#11638,1.);+#11638 = DIRECTION('',(1.,0.));+#11639 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11640 = PCURVE('',#11420,#11641);+#11641 = DEFINITIONAL_REPRESENTATION('',(#11642),#11646);+#11642 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11643,#11644,#11645),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11643 = CARTESIAN_POINT('',(0.185401204427,0.253997744606));+#11644 = CARTESIAN_POINT('',(0.208457263765,0.218365652902));+#11645 = CARTESIAN_POINT('',(0.208457263765,0.141956728981));+#11646 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11647 = ORIENTED_EDGE('',*,*,#11555,.F.);+#11648 = ADVANCED_FACE('',(#11649),#7298,.T.);+#11649 = FACE_BOUND('',#11650,.T.);+#11650 = EDGE_LOOP('',(#11651,#11652,#11675,#11696));+#11651 = ORIENTED_EDGE('',*,*,#7272,.T.);+#11652 = ORIENTED_EDGE('',*,*,#11653,.T.);+#11653 = EDGE_CURVE('',#7228,#11654,#11656,.T.);+#11654 = VERTEX_POINT('',#11655);+#11655 = CARTESIAN_POINT('',(0.465217924572,0.154532761347,0.97));+#11656 = SURFACE_CURVE('',#11657,(#11661,#11668),.PCURVE_S1.);+#11657 = LINE('',#11658,#11659);+#11658 = CARTESIAN_POINT('',(0.465217924572,0.154532761347,1.07));+#11659 = VECTOR('',#11660,1.);+#11660 = DIRECTION('',(-0.,-0.,-1.));+#11661 = PCURVE('',#7298,#11662);+#11662 = DEFINITIONAL_REPRESENTATION('',(#11663),#11667);+#11663 = LINE('',#11664,#11665);+#11664 = CARTESIAN_POINT('',(0.,0.));+#11665 = VECTOR('',#11666,1.);+#11666 = DIRECTION('',(0.,-1.));+#11667 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11668 = PCURVE('',#7253,#11669);+#11669 = DEFINITIONAL_REPRESENTATION('',(#11670),#11674);+#11670 = LINE('',#11671,#11672);+#11671 = CARTESIAN_POINT('',(1.,0.));+#11672 = VECTOR('',#11673,1.);+#11673 = DIRECTION('',(0.,-1.));+#11674 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11675 = ORIENTED_EDGE('',*,*,#11676,.T.);+#11676 = EDGE_CURVE('',#11654,#11605,#11677,.T.);+#11677 = SURFACE_CURVE('',#11678,(#11682,#11689),.PCURVE_S1.);+#11678 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11679,#11680,#11681),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11679 = CARTESIAN_POINT('',(0.465217924572,0.154532761347,0.97));+#11680 = CARTESIAN_POINT('',(0.514759870257,0.154532761347,0.97));+#11681 = CARTESIAN_POINT('',(0.537815929594,0.118900669643,0.97));+#11682 = PCURVE('',#7298,#11683);+#11683 = DEFINITIONAL_REPRESENTATION('',(#11684),#11688);+#11684 = LINE('',#11685,#11686);+#11685 = CARTESIAN_POINT('',(0.,-0.1));+#11686 = VECTOR('',#11687,1.);+#11687 = DIRECTION('',(1.,0.));+#11688 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11689 = PCURVE('',#11420,#11690);+#11690 = DEFINITIONAL_REPRESENTATION('',(#11691),#11695);+#11691 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11692,#11693,#11694),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11692 = CARTESIAN_POINT('',(0.112803199405,0.28962983631));+#11693 = CARTESIAN_POINT('',(0.162345145089,0.28962983631));+#11694 = CARTESIAN_POINT('',(0.185401204427,0.253997744606));+#11695 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11696 = ORIENTED_EDGE('',*,*,#11604,.F.);+#11697 = ADVANCED_FACE('',(#11698),#7253,.T.);+#11698 = FACE_BOUND('',#11699,.T.);+#11699 = EDGE_LOOP('',(#11700,#11701,#11724,#11745));+#11700 = ORIENTED_EDGE('',*,*,#7227,.T.);+#11701 = ORIENTED_EDGE('',*,*,#11702,.T.);+#11702 = EDGE_CURVE('',#7192,#11703,#11705,.T.);+#11703 = VERTEX_POINT('',#11704);+#11704 = CARTESIAN_POINT('',(0.399765392485,0.129285423642,0.97));+#11705 = SURFACE_CURVE('',#11706,(#11710,#11717),.PCURVE_S1.);+#11706 = LINE('',#11707,#11708);+#11707 = CARTESIAN_POINT('',(0.399765392485,0.129285423642,1.07));+#11708 = VECTOR('',#11709,1.);+#11709 = DIRECTION('',(-0.,-0.,-1.));+#11710 = PCURVE('',#7253,#11711);+#11711 = DEFINITIONAL_REPRESENTATION('',(#11712),#11716);+#11712 = LINE('',#11713,#11714);+#11713 = CARTESIAN_POINT('',(0.,0.));+#11714 = VECTOR('',#11715,1.);+#11715 = DIRECTION('',(0.,-1.));+#11716 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11717 = PCURVE('',#7211,#11718);+#11718 = DEFINITIONAL_REPRESENTATION('',(#11719),#11723);+#11719 = LINE('',#11720,#11721);+#11720 = CARTESIAN_POINT('',(1.,0.));+#11721 = VECTOR('',#11722,1.);+#11722 = DIRECTION('',(0.,-1.));+#11723 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11724 = ORIENTED_EDGE('',*,*,#11725,.T.);+#11725 = EDGE_CURVE('',#11703,#11654,#11726,.T.);+#11726 = SURFACE_CURVE('',#11727,(#11731,#11738),.PCURVE_S1.);+#11727 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11728,#11729,#11730),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11728 = CARTESIAN_POINT('',(0.399765392485,0.129285423642,0.97));+#11729 = CARTESIAN_POINT('',(0.422916724795,0.154532761347,0.97));+#11730 = CARTESIAN_POINT('',(0.465217924572,0.154532761347,0.97));+#11731 = PCURVE('',#7253,#11732);+#11732 = DEFINITIONAL_REPRESENTATION('',(#11733),#11737);+#11733 = LINE('',#11734,#11735);+#11734 = CARTESIAN_POINT('',(0.,-0.1));+#11735 = VECTOR('',#11736,1.);+#11736 = DIRECTION('',(1.,0.));+#11737 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11738 = PCURVE('',#11420,#11739);+#11739 = DEFINITIONAL_REPRESENTATION('',(#11740),#11744);+#11740 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11741,#11742,#11743),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11741 = CARTESIAN_POINT('',(4.735066731771E-02,0.264382498605));+#11742 = CARTESIAN_POINT('',(7.050199962798E-02,0.28962983631));+#11743 = CARTESIAN_POINT('',(0.112803199405,0.28962983631));+#11744 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11745 = ORIENTED_EDGE('',*,*,#11653,.F.);+#11746 = ADVANCED_FACE('',(#11747),#7211,.T.);+#11747 = FACE_BOUND('',#11748,.T.);+#11748 = EDGE_LOOP('',(#11749,#11750,#11773,#11794));+#11749 = ORIENTED_EDGE('',*,*,#7191,.T.);+#11750 = ORIENTED_EDGE('',*,*,#11751,.T.);+#11751 = EDGE_CURVE('',#7156,#11752,#11754,.T.);+#11752 = VERTEX_POINT('',#11753);+#11753 = CARTESIAN_POINT('',(0.376614060175,5.811651320684E-02,0.97));+#11754 = SURFACE_CURVE('',#11755,(#11759,#11766),.PCURVE_S1.);+#11755 = LINE('',#11756,#11757);+#11756 = CARTESIAN_POINT('',(0.376614060175,5.811651320684E-02,1.07));+#11757 = VECTOR('',#11758,1.);+#11758 = DIRECTION('',(-0.,-0.,-1.));+#11759 = PCURVE('',#7211,#11760);+#11760 = DEFINITIONAL_REPRESENTATION('',(#11761),#11765);+#11761 = LINE('',#11762,#11763);+#11762 = CARTESIAN_POINT('',(0.,0.));+#11763 = VECTOR('',#11764,1.);+#11764 = DIRECTION('',(0.,-1.));+#11765 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11766 = PCURVE('',#7175,#11767);+#11767 = DEFINITIONAL_REPRESENTATION('',(#11768),#11772);+#11768 = LINE('',#11769,#11770);+#11769 = CARTESIAN_POINT('',(1.,0.));+#11770 = VECTOR('',#11771,1.);+#11771 = DIRECTION('',(0.,-1.));+#11772 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11773 = ORIENTED_EDGE('',*,*,#11774,.T.);+#11774 = EDGE_CURVE('',#11752,#11703,#11775,.T.);+#11775 = SURFACE_CURVE('',#11776,(#11780,#11787),.PCURVE_S1.);+#11776 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11777,#11778,#11779),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11777 = CARTESIAN_POINT('',(0.376614060175,5.811651320684E-02,0.97));+#11778 = CARTESIAN_POINT('',(0.376614060175,0.104038085937,0.97));+#11779 = CARTESIAN_POINT('',(0.399765392485,0.129285423642,0.97));+#11780 = PCURVE('',#7211,#11781);+#11781 = DEFINITIONAL_REPRESENTATION('',(#11782),#11786);+#11782 = LINE('',#11783,#11784);+#11783 = CARTESIAN_POINT('',(0.,-0.1));+#11784 = VECTOR('',#11785,1.);+#11785 = DIRECTION('',(1.,0.));+#11786 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11787 = PCURVE('',#11420,#11788);+#11788 = DEFINITIONAL_REPRESENTATION('',(#11789),#11793);+#11789 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11790,#11791,#11792),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11790 = CARTESIAN_POINT('',(2.419933500744E-02,0.19321358817));+#11791 = CARTESIAN_POINT('',(2.419933500744E-02,0.2391351609));+#11792 = CARTESIAN_POINT('',(4.735066731771E-02,0.264382498605));+#11793 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11794 = ORIENTED_EDGE('',*,*,#11702,.F.);+#11795 = ADVANCED_FACE('',(#11796),#7175,.T.);+#11796 = FACE_BOUND('',#11797,.T.);+#11797 = EDGE_LOOP('',(#11798,#11799,#11822,#11843));+#11798 = ORIENTED_EDGE('',*,*,#7155,.T.);+#11799 = ORIENTED_EDGE('',*,*,#11800,.T.);+#11800 = EDGE_CURVE('',#7111,#11801,#11803,.T.);+#11801 = VERTEX_POINT('',#11802);+#11802 = CARTESIAN_POINT('',(0.39919375465,-1.371930803571E-02,0.97));+#11803 = SURFACE_CURVE('',#11804,(#11808,#11815),.PCURVE_S1.);+#11804 = LINE('',#11805,#11806);+#11805 = CARTESIAN_POINT('',(0.39919375465,-1.371930803571E-02,1.07));+#11806 = VECTOR('',#11807,1.);+#11807 = DIRECTION('',(-0.,-0.,-1.));+#11808 = PCURVE('',#7175,#11809);+#11809 = DEFINITIONAL_REPRESENTATION('',(#11810),#11814);+#11810 = LINE('',#11811,#11812);+#11811 = CARTESIAN_POINT('',(0.,0.));+#11812 = VECTOR('',#11813,1.);+#11813 = DIRECTION('',(0.,-1.));+#11814 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11815 = PCURVE('',#7136,#11816);+#11816 = DEFINITIONAL_REPRESENTATION('',(#11817),#11821);+#11817 = LINE('',#11818,#11819);+#11818 = CARTESIAN_POINT('',(1.,0.));+#11819 = VECTOR('',#11820,1.);+#11820 = DIRECTION('',(0.,-1.));+#11821 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11822 = ORIENTED_EDGE('',*,*,#11823,.T.);+#11823 = EDGE_CURVE('',#11801,#11752,#11824,.T.);+#11824 = SURFACE_CURVE('',#11825,(#11829,#11836),.PCURVE_S1.);+#11825 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11826,#11827,#11828),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11826 = CARTESIAN_POINT('',(0.39919375465,-1.371930803571E-02,0.97));+#11827 = CARTESIAN_POINT('',(0.376614060175,1.162330264137E-02,0.97));+#11828 = CARTESIAN_POINT('',(0.376614060175,5.811651320684E-02,0.97));+#11829 = PCURVE('',#7175,#11830);+#11830 = DEFINITIONAL_REPRESENTATION('',(#11831),#11835);+#11831 = LINE('',#11832,#11833);+#11832 = CARTESIAN_POINT('',(0.,-0.1));+#11833 = VECTOR('',#11834,1.);+#11834 = DIRECTION('',(1.,0.));+#11835 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11836 = PCURVE('',#11420,#11837);+#11837 = DEFINITIONAL_REPRESENTATION('',(#11838),#11842);+#11838 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11839,#11840,#11841),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11839 = CARTESIAN_POINT('',(4.677902948289E-02,0.121377766927));+#11840 = CARTESIAN_POINT('',(2.419933500744E-02,0.146720377604));+#11841 = CARTESIAN_POINT('',(2.419933500744E-02,0.19321358817));+#11842 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11843 = ORIENTED_EDGE('',*,*,#11751,.F.);+#11844 = ADVANCED_FACE('',(#11845),#7136,.T.);+#11845 = FACE_BOUND('',#11846,.T.);+#11846 = EDGE_LOOP('',(#11847,#11848,#11871,#11892));+#11847 = ORIENTED_EDGE('',*,*,#7110,.T.);+#11848 = ORIENTED_EDGE('',*,*,#11849,.T.);+#11849 = EDGE_CURVE('',#7075,#11850,#11852,.T.);+#11850 = VERTEX_POINT('',#11851);+#11851 = CARTESIAN_POINT('',(0.462931373233,-3.90619187128E-02,0.97));+#11852 = SURFACE_CURVE('',#11853,(#11857,#11864),.PCURVE_S1.);+#11853 = LINE('',#11854,#11855);+#11854 = CARTESIAN_POINT('',(0.462931373233,-3.90619187128E-02,1.07));+#11855 = VECTOR('',#11856,1.);+#11856 = DIRECTION('',(-0.,-0.,-1.));+#11857 = PCURVE('',#7136,#11858);+#11858 = DEFINITIONAL_REPRESENTATION('',(#11859),#11863);+#11859 = LINE('',#11860,#11861);+#11860 = CARTESIAN_POINT('',(0.,0.));+#11861 = VECTOR('',#11862,1.);+#11862 = DIRECTION('',(0.,-1.));+#11863 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11864 = PCURVE('',#7094,#11865);+#11865 = DEFINITIONAL_REPRESENTATION('',(#11866),#11870);+#11866 = LINE('',#11867,#11868);+#11867 = CARTESIAN_POINT('',(1.,0.));+#11868 = VECTOR('',#11869,1.);+#11869 = DIRECTION('',(0.,-1.));+#11870 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11871 = ORIENTED_EDGE('',*,*,#11872,.T.);+#11872 = EDGE_CURVE('',#11850,#11801,#11873,.T.);+#11873 = SURFACE_CURVE('',#11874,(#11878,#11885),.PCURVE_S1.);+#11874 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11875,#11876,#11877),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11875 = CARTESIAN_POINT('',(0.462931373233,-3.90619187128E-02,0.97));+#11876 = CARTESIAN_POINT('',(0.421773449126,-3.90619187128E-02,0.97));+#11877 = CARTESIAN_POINT('',(0.39919375465,-1.371930803571E-02,0.97));+#11878 = PCURVE('',#7136,#11879);+#11879 = DEFINITIONAL_REPRESENTATION('',(#11880),#11884);+#11880 = LINE('',#11881,#11882);+#11881 = CARTESIAN_POINT('',(0.,-0.1));+#11882 = VECTOR('',#11883,1.);+#11883 = DIRECTION('',(1.,0.));+#11884 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11885 = PCURVE('',#11420,#11886);+#11886 = DEFINITIONAL_REPRESENTATION('',(#11887),#11891);+#11887 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11888,#11889,#11890),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11888 = CARTESIAN_POINT('',(0.110516648065,9.603515625E-02));+#11889 = CARTESIAN_POINT('',(6.935872395833E-02,9.603515625E-02));+#11890 = CARTESIAN_POINT('',(4.677902948289E-02,0.121377766927));+#11891 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11892 = ORIENTED_EDGE('',*,*,#11800,.F.);+#11893 = ADVANCED_FACE('',(#11894),#7094,.T.);+#11894 = FACE_BOUND('',#11895,.T.);+#11895 = EDGE_LOOP('',(#11896,#11897,#11920,#11941));+#11896 = ORIENTED_EDGE('',*,*,#7074,.T.);+#11897 = ORIENTED_EDGE('',*,*,#11898,.T.);+#11898 = EDGE_CURVE('',#7030,#11899,#11901,.T.);+#11899 = VERTEX_POINT('',#11900);+#11900 = CARTESIAN_POINT('',(0.500087832496,-2.886771065848E-02,0.97));+#11901 = SURFACE_CURVE('',#11902,(#11906,#11913),.PCURVE_S1.);+#11902 = LINE('',#11903,#11904);+#11903 = CARTESIAN_POINT('',(0.500087832496,-2.886771065848E-02,1.07));+#11904 = VECTOR('',#11905,1.);+#11905 = DIRECTION('',(-0.,-0.,-1.));+#11906 = PCURVE('',#7094,#11907);+#11907 = DEFINITIONAL_REPRESENTATION('',(#11908),#11912);+#11908 = LINE('',#11909,#11910);+#11909 = CARTESIAN_POINT('',(0.,0.));+#11910 = VECTOR('',#11911,1.);+#11911 = DIRECTION('',(0.,-1.));+#11912 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11913 = PCURVE('',#7055,#11914);+#11914 = DEFINITIONAL_REPRESENTATION('',(#11915),#11919);+#11915 = LINE('',#11916,#11917);+#11916 = CARTESIAN_POINT('',(1.,0.));+#11917 = VECTOR('',#11918,1.);+#11918 = DIRECTION('',(0.,-1.));+#11919 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11920 = ORIENTED_EDGE('',*,*,#11921,.T.);+#11921 = EDGE_CURVE('',#11899,#11850,#11922,.T.);+#11922 = SURFACE_CURVE('',#11923,(#11927,#11934),.PCURVE_S1.);+#11923 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11924,#11925,#11926),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11924 = CARTESIAN_POINT('',(0.500087832496,-2.886771065848E-02,0.97));+#11925 = CARTESIAN_POINT('',(0.483891427176,-3.90619187128E-02,0.97));+#11926 = CARTESIAN_POINT('',(0.462931373233,-3.90619187128E-02,0.97));+#11927 = PCURVE('',#7094,#11928);+#11928 = DEFINITIONAL_REPRESENTATION('',(#11929),#11933);+#11929 = LINE('',#11930,#11931);+#11930 = CARTESIAN_POINT('',(0.,-0.1));+#11931 = VECTOR('',#11932,1.);+#11932 = DIRECTION('',(1.,0.));+#11933 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11934 = PCURVE('',#11420,#11935);+#11935 = DEFINITIONAL_REPRESENTATION('',(#11936),#11940);+#11936 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11937,#11938,#11939),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11937 = CARTESIAN_POINT('',(0.147673107329,0.106229364304));+#11938 = CARTESIAN_POINT('',(0.131476702009,9.603515625E-02));+#11939 = CARTESIAN_POINT('',(0.110516648065,9.603515625E-02));+#11940 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11941 = ORIENTED_EDGE('',*,*,#11849,.F.);+#11942 = ADVANCED_FACE('',(#11943),#7055,.T.);+#11943 = FACE_BOUND('',#11944,.T.);+#11944 = EDGE_LOOP('',(#11945,#11946,#11969,#11990));+#11945 = ORIENTED_EDGE('',*,*,#7029,.T.);+#11946 = ORIENTED_EDGE('',*,*,#11947,.T.);+#11947 = EDGE_CURVE('',#6994,#11948,#11950,.T.);+#11948 = VERTEX_POINT('',#11949);+#11949 = CARTESIAN_POINT('',(0.525239897228,3.810918898806E-04,0.97));+#11950 = SURFACE_CURVE('',#11951,(#11955,#11962),.PCURVE_S1.);+#11951 = LINE('',#11952,#11953);+#11952 = CARTESIAN_POINT('',(0.525239897228,3.810918898806E-04,1.07));+#11953 = VECTOR('',#11954,1.);+#11954 = DIRECTION('',(-0.,-0.,-1.));+#11955 = PCURVE('',#7055,#11956);+#11956 = DEFINITIONAL_REPRESENTATION('',(#11957),#11961);+#11957 = LINE('',#11958,#11959);+#11958 = CARTESIAN_POINT('',(0.,0.));+#11959 = VECTOR('',#11960,1.);+#11960 = DIRECTION('',(0.,-1.));+#11961 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11962 = PCURVE('',#7013,#11963);+#11963 = DEFINITIONAL_REPRESENTATION('',(#11964),#11968);+#11964 = LINE('',#11965,#11966);+#11965 = CARTESIAN_POINT('',(1.,0.));+#11966 = VECTOR('',#11967,1.);+#11967 = DIRECTION('',(0.,-1.));+#11968 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11969 = ORIENTED_EDGE('',*,*,#11970,.T.);+#11970 = EDGE_CURVE('',#11948,#11899,#11971,.T.);+#11971 = SURFACE_CURVE('',#11972,(#11976,#11983),.PCURVE_S1.);+#11972 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11973,#11974,#11975),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11973 = CARTESIAN_POINT('',(0.525239897228,3.810918898806E-04,0.97));+#11974 = CARTESIAN_POINT('',(0.516284237816,-1.867350260417E-02,0.97));+#11975 = CARTESIAN_POINT('',(0.500087832496,-2.886771065848E-02,0.97));+#11976 = PCURVE('',#7055,#11977);+#11977 = DEFINITIONAL_REPRESENTATION('',(#11978),#11982);+#11978 = LINE('',#11979,#11980);+#11979 = CARTESIAN_POINT('',(0.,-0.1));+#11980 = VECTOR('',#11981,1.);+#11981 = DIRECTION('',(1.,0.));+#11982 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11983 = PCURVE('',#11420,#11984);+#11984 = DEFINITIONAL_REPRESENTATION('',(#11985),#11989);+#11985 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11986,#11987,#11988),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11986 = CARTESIAN_POINT('',(0.172825172061,0.135478166853));+#11987 = CARTESIAN_POINT('',(0.163869512649,0.116423572359));+#11988 = CARTESIAN_POINT('',(0.147673107329,0.106229364304));+#11989 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11990 = ORIENTED_EDGE('',*,*,#11898,.F.);+#11991 = ADVANCED_FACE('',(#11992),#7013,.T.);+#11992 = FACE_BOUND('',#11993,.T.);+#11993 = EDGE_LOOP('',(#11994,#11995,#12018,#12039));+#11994 = ORIENTED_EDGE('',*,*,#6993,.T.);+#11995 = ORIENTED_EDGE('',*,*,#11996,.T.);+#11996 = EDGE_CURVE('',#6949,#11997,#11999,.T.);+#11997 = VERTEX_POINT('',#11998);+#11998 = CARTESIAN_POINT('',(0.506471121652,-8.069620768229E-02,0.97));+#11999 = SURFACE_CURVE('',#12000,(#12004,#12011),.PCURVE_S1.);+#12000 = LINE('',#12001,#12002);+#12001 = CARTESIAN_POINT('',(0.506471121652,-8.069620768229E-02,1.07));+#12002 = VECTOR('',#12003,1.);+#12003 = DIRECTION('',(-0.,-0.,-1.));+#12004 = PCURVE('',#7013,#12005);+#12005 = DEFINITIONAL_REPRESENTATION('',(#12006),#12010);+#12006 = LINE('',#12007,#12008);+#12007 = CARTESIAN_POINT('',(0.,0.));+#12008 = VECTOR('',#12009,1.);+#12009 = DIRECTION('',(0.,-1.));+#12010 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12011 = PCURVE('',#6974,#12012);+#12012 = DEFINITIONAL_REPRESENTATION('',(#12013),#12017);+#12013 = LINE('',#12014,#12015);+#12014 = CARTESIAN_POINT('',(1.,0.));+#12015 = VECTOR('',#12016,1.);+#12016 = DIRECTION('',(0.,-1.));+#12017 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12018 = ORIENTED_EDGE('',*,*,#12019,.T.);+#12019 = EDGE_CURVE('',#11997,#11948,#12020,.T.);+#12020 = SURFACE_CURVE('',#12021,(#12025,#12032),.PCURVE_S1.);+#12021 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12022,#12023,#12024),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12022 = CARTESIAN_POINT('',(0.506471121652,-8.069620768229E-02,0.97));+#12023 = CARTESIAN_POINT('',(0.525239897228,-5.316231863839E-02,0.97));+#12024 = CARTESIAN_POINT('',(0.525239897228,3.810918898806E-04,0.97));+#12025 = PCURVE('',#7013,#12026);+#12026 = DEFINITIONAL_REPRESENTATION('',(#12027),#12031);+#12027 = LINE('',#12028,#12029);+#12028 = CARTESIAN_POINT('',(0.,-0.1));+#12029 = VECTOR('',#12030,1.);+#12030 = DIRECTION('',(1.,0.));+#12031 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12032 = PCURVE('',#11420,#12033);+#12033 = DEFINITIONAL_REPRESENTATION('',(#12034),#12038);+#12034 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12035,#12036,#12037),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12035 = CARTESIAN_POINT('',(0.154056396484,5.440086728051E-02));+#12036 = CARTESIAN_POINT('',(0.172825172061,8.19347563244E-02));+#12037 = CARTESIAN_POINT('',(0.172825172061,0.135478166853));+#12038 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12039 = ORIENTED_EDGE('',*,*,#11947,.F.);+#12040 = ADVANCED_FACE('',(#12041),#6974,.T.);+#12041 = FACE_BOUND('',#12042,.T.);+#12042 = EDGE_LOOP('',(#12043,#12044,#12067,#12088));+#12043 = ORIENTED_EDGE('',*,*,#6948,.T.);+#12044 = ORIENTED_EDGE('',*,*,#12045,.T.);+#12045 = EDGE_CURVE('',#6913,#12046,#12048,.T.);+#12046 = VERTEX_POINT('',#12047);+#12047 = CARTESIAN_POINT('',(0.451117524647,-0.108230096726,0.97));+#12048 = SURFACE_CURVE('',#12049,(#12053,#12060),.PCURVE_S1.);+#12049 = LINE('',#12050,#12051);+#12050 = CARTESIAN_POINT('',(0.451117524647,-0.108230096726,1.07));+#12051 = VECTOR('',#12052,1.);+#12052 = DIRECTION('',(-0.,-0.,-1.));+#12053 = PCURVE('',#6974,#12054);+#12054 = DEFINITIONAL_REPRESENTATION('',(#12055),#12059);+#12055 = LINE('',#12056,#12057);+#12056 = CARTESIAN_POINT('',(0.,0.));+#12057 = VECTOR('',#12058,1.);+#12058 = DIRECTION('',(0.,-1.));+#12059 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12060 = PCURVE('',#6932,#12061);+#12061 = DEFINITIONAL_REPRESENTATION('',(#12062),#12066);+#12062 = LINE('',#12063,#12064);+#12063 = CARTESIAN_POINT('',(1.,0.));+#12064 = VECTOR('',#12065,1.);+#12065 = DIRECTION('',(0.,-1.));+#12066 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12067 = ORIENTED_EDGE('',*,*,#12068,.T.);+#12068 = EDGE_CURVE('',#12046,#11997,#12069,.T.);+#12069 = SURFACE_CURVE('',#12070,(#12074,#12081),.PCURVE_S1.);+#12070 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12071,#12072,#12073),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12071 = CARTESIAN_POINT('',(0.451117524647,-0.108230096726,0.97));+#12072 = CARTESIAN_POINT('',(0.487702346075,-0.108230096726,0.97));+#12073 = CARTESIAN_POINT('',(0.506471121652,-8.069620768229E-02,0.97));+#12074 = PCURVE('',#6974,#12075);+#12075 = DEFINITIONAL_REPRESENTATION('',(#12076),#12080);+#12076 = LINE('',#12077,#12078);+#12077 = CARTESIAN_POINT('',(0.,-0.1));+#12078 = VECTOR('',#12079,1.);+#12079 = DIRECTION('',(1.,0.));+#12080 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12081 = PCURVE('',#11420,#12082);+#12082 = DEFINITIONAL_REPRESENTATION('',(#12083),#12087);+#12083 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12084,#12085,#12086),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12084 = CARTESIAN_POINT('',(9.870279947917E-02,2.686697823661E-02));+#12085 = CARTESIAN_POINT('',(0.135287620908,2.686697823661E-02));+#12086 = CARTESIAN_POINT('',(0.154056396484,5.440086728051E-02));+#12087 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12088 = ORIENTED_EDGE('',*,*,#11996,.F.);+#12089 = ADVANCED_FACE('',(#12090),#6932,.T.);+#12090 = FACE_BOUND('',#12091,.T.);+#12091 = EDGE_LOOP('',(#12092,#12093,#12116,#12137));+#12092 = ORIENTED_EDGE('',*,*,#6912,.T.);+#12093 = ORIENTED_EDGE('',*,*,#12094,.T.);+#12094 = EDGE_CURVE('',#6877,#12095,#12097,.T.);+#12095 = VERTEX_POINT('',#12096);+#12096 = CARTESIAN_POINT('',(0.422916724795,-0.1045144508,0.97));+#12097 = SURFACE_CURVE('',#12098,(#12102,#12109),.PCURVE_S1.);+#12098 = LINE('',#12099,#12100);+#12099 = CARTESIAN_POINT('',(0.422916724795,-0.1045144508,1.07));+#12100 = VECTOR('',#12101,1.);+#12101 = DIRECTION('',(-0.,-0.,-1.));+#12102 = PCURVE('',#6932,#12103);+#12103 = DEFINITIONAL_REPRESENTATION('',(#12104),#12108);+#12104 = LINE('',#12105,#12106);+#12105 = CARTESIAN_POINT('',(0.,0.));+#12106 = VECTOR('',#12107,1.);+#12107 = DIRECTION('',(0.,-1.));+#12108 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12109 = PCURVE('',#6896,#12110);+#12110 = DEFINITIONAL_REPRESENTATION('',(#12111),#12115);+#12111 = LINE('',#12112,#12113);+#12112 = CARTESIAN_POINT('',(1.,0.));+#12113 = VECTOR('',#12114,1.);+#12114 = DIRECTION('',(0.,-1.));+#12115 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12116 = ORIENTED_EDGE('',*,*,#12117,.T.);+#12117 = EDGE_CURVE('',#12095,#12046,#12118,.T.);+#12118 = SURFACE_CURVE('',#12119,(#12123,#12130),.PCURVE_S1.);+#12119 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12120,#12121,#12122),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12120 = CARTESIAN_POINT('',(0.422916724795,-0.1045144508,0.97));+#12121 = CARTESIAN_POINT('',(0.436445486886,-0.108230096726,0.97));+#12122 = CARTESIAN_POINT('',(0.451117524647,-0.108230096726,0.97));+#12123 = PCURVE('',#6932,#12124);+#12124 = DEFINITIONAL_REPRESENTATION('',(#12125),#12129);+#12125 = LINE('',#12126,#12127);+#12126 = CARTESIAN_POINT('',(0.,-0.1));+#12127 = VECTOR('',#12128,1.);+#12128 = DIRECTION('',(1.,0.));+#12129 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12130 = PCURVE('',#11420,#12131);+#12131 = DEFINITIONAL_REPRESENTATION('',(#12132),#12136);+#12132 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12133,#12134,#12135),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12133 = CARTESIAN_POINT('',(7.050199962798E-02,3.058262416295E-02));+#12134 = CARTESIAN_POINT('',(8.403076171875E-02,2.686697823661E-02));+#12135 = CARTESIAN_POINT('',(9.870279947917E-02,2.686697823661E-02));+#12136 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12137 = ORIENTED_EDGE('',*,*,#12045,.F.);+#12138 = ADVANCED_FACE('',(#12139),#6896,.T.);+#12139 = FACE_BOUND('',#12140,.T.);+#12140 = EDGE_LOOP('',(#12141,#12142,#12165,#12186));+#12141 = ORIENTED_EDGE('',*,*,#6876,.T.);+#12142 = ORIENTED_EDGE('',*,*,#12143,.T.);+#12143 = EDGE_CURVE('',#6851,#12144,#12146,.T.);+#12144 = VERTEX_POINT('',#12145);+#12145 = CARTESIAN_POINT('',(0.397383568173,-9.374860491071E-02,0.97));+#12146 = SURFACE_CURVE('',#12147,(#12151,#12158),.PCURVE_S1.);+#12147 = LINE('',#12148,#12149);+#12148 = CARTESIAN_POINT('',(0.397383568173,-9.374860491071E-02,1.07));+#12149 = VECTOR('',#12150,1.);+#12150 = DIRECTION('',(-0.,-0.,-1.));+#12151 = PCURVE('',#6896,#12152);+#12152 = DEFINITIONAL_REPRESENTATION('',(#12153),#12157);+#12153 = LINE('',#12154,#12155);+#12154 = CARTESIAN_POINT('',(0.,0.));+#12155 = VECTOR('',#12156,1.);+#12156 = DIRECTION('',(0.,-1.));+#12157 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12158 = PCURVE('',#6865,#12159);+#12159 = DEFINITIONAL_REPRESENTATION('',(#12160),#12164);+#12160 = LINE('',#12161,#12162);+#12161 = CARTESIAN_POINT('',(3.544154575893E-02,0.));+#12162 = VECTOR('',#12163,1.);+#12163 = DIRECTION('',(0.,-1.));+#12164 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12165 = ORIENTED_EDGE('',*,*,#12166,.T.);+#12166 = EDGE_CURVE('',#12144,#12095,#12167,.T.);+#12167 = SURFACE_CURVE('',#12168,(#12172,#12179),.PCURVE_S1.);+#12168 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12169,#12170,#12171),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12169 = CARTESIAN_POINT('',(0.397383568173,-9.374860491071E-02,0.97));+#12170 = CARTESIAN_POINT('',(0.409387962705,-0.100798804874,0.97));+#12171 = CARTESIAN_POINT('',(0.422916724795,-0.1045144508,0.97));+#12172 = PCURVE('',#6896,#12173);+#12173 = DEFINITIONAL_REPRESENTATION('',(#12174),#12178);+#12174 = LINE('',#12175,#12176);+#12175 = CARTESIAN_POINT('',(0.,-0.1));+#12176 = VECTOR('',#12177,1.);+#12177 = DIRECTION('',(1.,0.));+#12178 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12179 = PCURVE('',#11420,#12180);+#12180 = DEFINITIONAL_REPRESENTATION('',(#12181),#12185);+#12181 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12182,#12183,#12184),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12182 = CARTESIAN_POINT('',(4.496884300595E-02,4.134847005208E-02));+#12183 = CARTESIAN_POINT('',(5.69732375372E-02,3.429827008929E-02));+#12184 = CARTESIAN_POINT('',(7.050199962798E-02,3.058262416295E-02));+#12185 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12186 = ORIENTED_EDGE('',*,*,#12094,.F.);+#12187 = ADVANCED_FACE('',(#12188),#6865,.T.);+#12188 = FACE_BOUND('',#12189,.T.);+#12189 = EDGE_LOOP('',(#12190,#12191,#12192,#12213));+#12190 = ORIENTED_EDGE('',*,*,#6850,.F.);+#12191 = ORIENTED_EDGE('',*,*,#11432,.T.);+#12192 = ORIENTED_EDGE('',*,*,#12193,.T.);+#12193 = EDGE_CURVE('',#11405,#12144,#12194,.T.);+#12194 = SURFACE_CURVE('',#12195,(#12199,#12206),.PCURVE_S1.);+#12195 = LINE('',#12196,#12197);+#12196 = CARTESIAN_POINT('',(0.397383568173,-0.12919015067,0.97));+#12197 = VECTOR('',#12198,1.);+#12198 = DIRECTION('',(0.,1.,0.));+#12199 = PCURVE('',#6865,#12200);+#12200 = DEFINITIONAL_REPRESENTATION('',(#12201),#12205);+#12201 = LINE('',#12202,#12203);+#12202 = CARTESIAN_POINT('',(0.,-0.1));+#12203 = VECTOR('',#12204,1.);+#12204 = DIRECTION('',(1.,0.));+#12205 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12206 = PCURVE('',#11420,#12207);+#12207 = DEFINITIONAL_REPRESENTATION('',(#12208),#12212);+#12208 = LINE('',#12209,#12210);+#12209 = CARTESIAN_POINT('',(4.496884300595E-02,5.906924293155E-03));+#12210 = VECTOR('',#12211,1.);+#12211 = DIRECTION('',(0.,1.));+#12212 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12213 = ORIENTED_EDGE('',*,*,#12143,.F.);+#12214 = ADVANCED_FACE('',(#12215),#7478,.T.);+#12215 = FACE_BOUND('',#12216,.T.);+#12216 = EDGE_LOOP('',(#12217,#12218,#12241,#12269));+#12217 = ORIENTED_EDGE('',*,*,#7461,.F.);+#12218 = ORIENTED_EDGE('',*,*,#12219,.T.);+#12219 = EDGE_CURVE('',#7462,#12220,#12222,.T.);+#12220 = VERTEX_POINT('',#12221);+#12221 = CARTESIAN_POINT('',(0.795815139044,-0.135097074963,0.97));+#12222 = SURFACE_CURVE('',#12223,(#12227,#12234),.PCURVE_S1.);+#12223 = LINE('',#12224,#12225);+#12224 = CARTESIAN_POINT('',(0.795815139044,-0.135097074963,1.07));+#12225 = VECTOR('',#12226,1.);+#12226 = DIRECTION('',(-0.,-0.,-1.));+#12227 = PCURVE('',#7478,#12228);+#12228 = DEFINITIONAL_REPRESENTATION('',(#12229),#12233);+#12229 = LINE('',#12230,#12231);+#12230 = CARTESIAN_POINT('',(0.,0.));+#12231 = VECTOR('',#12232,1.);+#12232 = DIRECTION('',(0.,-1.));+#12233 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12234 = PCURVE('',#7736,#12235);+#12235 = DEFINITIONAL_REPRESENTATION('',(#12236),#12240);+#12236 = LINE('',#12237,#12238);+#12237 = CARTESIAN_POINT('',(3.239281063988E-02,0.));+#12238 = VECTOR('',#12239,1.);+#12239 = DIRECTION('',(0.,-1.));+#12240 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12241 = ORIENTED_EDGE('',*,*,#12242,.T.);+#12242 = EDGE_CURVE('',#12220,#12243,#12245,.T.);+#12243 = VERTEX_POINT('',#12244);+#12244 = CARTESIAN_POINT('',(0.638805280413,-0.135097074963,0.97));+#12245 = SURFACE_CURVE('',#12246,(#12250,#12257),.PCURVE_S1.);+#12246 = LINE('',#12247,#12248);+#12247 = CARTESIAN_POINT('',(0.795815139044,-0.135097074963,0.97));+#12248 = VECTOR('',#12249,1.);+#12249 = DIRECTION('',(-1.,0.,0.));+#12250 = PCURVE('',#7478,#12251);+#12251 = DEFINITIONAL_REPRESENTATION('',(#12252),#12256);+#12252 = LINE('',#12253,#12254);+#12253 = CARTESIAN_POINT('',(0.,-0.1));+#12254 = VECTOR('',#12255,1.);+#12255 = DIRECTION('',(1.,0.));+#12256 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12257 = PCURVE('',#12258,#12263);+#12258 = PLANE('',#12259);+#12259 = AXIS2_PLACEMENT_3D('',#12260,#12261,#12262);+#12260 = CARTESIAN_POINT('',(0.587357875279,-0.135097074963,0.97));+#12261 = DIRECTION('',(0.,0.,1.));+#12262 = DIRECTION('',(1.,0.,0.));+#12263 = DEFINITIONAL_REPRESENTATION('',(#12264),#12268);+#12264 = LINE('',#12265,#12266);+#12265 = CARTESIAN_POINT('',(0.208457263765,0.));+#12266 = VECTOR('',#12267,1.);+#12267 = DIRECTION('',(-1.,0.));+#12268 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12269 = ORIENTED_EDGE('',*,*,#12270,.F.);+#12270 = EDGE_CURVE('',#7464,#12243,#12271,.T.);+#12271 = SURFACE_CURVE('',#12272,(#12276,#12283),.PCURVE_S1.);+#12272 = LINE('',#12273,#12274);+#12273 = CARTESIAN_POINT('',(0.638805280413,-0.135097074963,1.07));+#12274 = VECTOR('',#12275,1.);+#12275 = DIRECTION('',(-0.,-0.,-1.));+#12276 = PCURVE('',#7478,#12277);+#12277 = DEFINITIONAL_REPRESENTATION('',(#12278),#12282);+#12278 = LINE('',#12279,#12280);+#12279 = CARTESIAN_POINT('',(0.157009858631,0.));+#12280 = VECTOR('',#12281,1.);+#12281 = DIRECTION('',(0.,-1.));+#12282 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12283 = PCURVE('',#7504,#12284);+#12284 = DEFINITIONAL_REPRESENTATION('',(#12285),#12289);+#12285 = LINE('',#12286,#12287);+#12286 = CARTESIAN_POINT('',(0.,0.));+#12287 = VECTOR('',#12288,1.);+#12288 = DIRECTION('',(0.,-1.));+#12289 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12290 = ADVANCED_FACE('',(#12291),#7736,.T.);+#12291 = FACE_BOUND('',#12292,.T.);+#12292 = EDGE_LOOP('',(#12293,#12294,#12317,#12338));+#12293 = ORIENTED_EDGE('',*,*,#7723,.F.);+#12294 = ORIENTED_EDGE('',*,*,#12295,.T.);+#12295 = EDGE_CURVE('',#7698,#12296,#12298,.T.);+#12296 = VERTEX_POINT('',#12297);+#12297 = CARTESIAN_POINT('',(0.795815139044,-0.102704264323,0.97));+#12298 = SURFACE_CURVE('',#12299,(#12303,#12310),.PCURVE_S1.);+#12299 = LINE('',#12300,#12301);+#12300 = CARTESIAN_POINT('',(0.795815139044,-0.102704264323,1.07));+#12301 = VECTOR('',#12302,1.);+#12302 = DIRECTION('',(-0.,-0.,-1.));+#12303 = PCURVE('',#7736,#12304);+#12304 = DEFINITIONAL_REPRESENTATION('',(#12305),#12309);+#12305 = LINE('',#12306,#12307);+#12306 = CARTESIAN_POINT('',(0.,0.));+#12307 = VECTOR('',#12308,1.);+#12308 = DIRECTION('',(0.,-1.));+#12309 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12310 = PCURVE('',#7712,#12311);+#12311 = DEFINITIONAL_REPRESENTATION('',(#12312),#12316);+#12312 = LINE('',#12313,#12314);+#12313 = CARTESIAN_POINT('',(5.906924293155E-02,0.));+#12314 = VECTOR('',#12315,1.);+#12315 = DIRECTION('',(0.,-1.));+#12316 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12317 = ORIENTED_EDGE('',*,*,#12318,.T.);+#12318 = EDGE_CURVE('',#12296,#12220,#12319,.T.);+#12319 = SURFACE_CURVE('',#12320,(#12324,#12331),.PCURVE_S1.);+#12320 = LINE('',#12321,#12322);+#12321 = CARTESIAN_POINT('',(0.795815139044,-0.102704264323,0.97));+#12322 = VECTOR('',#12323,1.);+#12323 = DIRECTION('',(0.,-1.,0.));+#12324 = PCURVE('',#7736,#12325);+#12325 = DEFINITIONAL_REPRESENTATION('',(#12326),#12330);+#12326 = LINE('',#12327,#12328);+#12327 = CARTESIAN_POINT('',(0.,-0.1));+#12328 = VECTOR('',#12329,1.);+#12329 = DIRECTION('',(1.,0.));+#12330 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12331 = PCURVE('',#12258,#12332);+#12332 = DEFINITIONAL_REPRESENTATION('',(#12333),#12337);+#12333 = LINE('',#12334,#12335);+#12334 = CARTESIAN_POINT('',(0.208457263765,3.239281063988E-02));+#12335 = VECTOR('',#12336,1.);+#12336 = DIRECTION('',(0.,-1.));+#12337 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12338 = ORIENTED_EDGE('',*,*,#12219,.F.);+#12339 = ADVANCED_FACE('',(#12340),#7712,.T.);+#12340 = FACE_BOUND('',#12341,.T.);+#12341 = EDGE_LOOP('',(#12342,#12343,#12366,#12387));+#12342 = ORIENTED_EDGE('',*,*,#7697,.F.);+#12343 = ORIENTED_EDGE('',*,*,#12344,.T.);+#12344 = EDGE_CURVE('',#7672,#12345,#12347,.T.);+#12345 = VERTEX_POINT('',#12346);+#12346 = CARTESIAN_POINT('',(0.736745896112,-0.102704264323,0.97));+#12347 = SURFACE_CURVE('',#12348,(#12352,#12359),.PCURVE_S1.);+#12348 = LINE('',#12349,#12350);+#12349 = CARTESIAN_POINT('',(0.736745896112,-0.102704264323,1.07));+#12350 = VECTOR('',#12351,1.);+#12351 = DIRECTION('',(-0.,-0.,-1.));+#12352 = PCURVE('',#7712,#12353);+#12353 = DEFINITIONAL_REPRESENTATION('',(#12354),#12358);+#12354 = LINE('',#12355,#12356);+#12355 = CARTESIAN_POINT('',(0.,0.));+#12356 = VECTOR('',#12357,1.);+#12357 = DIRECTION('',(0.,-1.));+#12358 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12359 = PCURVE('',#7686,#12360);+#12360 = DEFINITIONAL_REPRESENTATION('',(#12361),#12365);+#12361 = LINE('',#12362,#12363);+#12362 = CARTESIAN_POINT('',(0.252092285156,0.));+#12363 = VECTOR('',#12364,1.);+#12364 = DIRECTION('',(0.,-1.));+#12365 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12366 = ORIENTED_EDGE('',*,*,#12367,.T.);+#12367 = EDGE_CURVE('',#12345,#12296,#12368,.T.);+#12368 = SURFACE_CURVE('',#12369,(#12373,#12380),.PCURVE_S1.);+#12369 = LINE('',#12370,#12371);+#12370 = CARTESIAN_POINT('',(0.736745896112,-0.102704264323,0.97));+#12371 = VECTOR('',#12372,1.);+#12372 = DIRECTION('',(1.,0.,0.));+#12373 = PCURVE('',#7712,#12374);+#12374 = DEFINITIONAL_REPRESENTATION('',(#12375),#12379);+#12375 = LINE('',#12376,#12377);+#12376 = CARTESIAN_POINT('',(0.,-0.1));+#12377 = VECTOR('',#12378,1.);+#12378 = DIRECTION('',(1.,0.));+#12379 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12380 = PCURVE('',#12258,#12381);+#12381 = DEFINITIONAL_REPRESENTATION('',(#12382),#12386);+#12382 = LINE('',#12383,#12384);+#12383 = CARTESIAN_POINT('',(0.149388020833,3.239281063988E-02));+#12384 = VECTOR('',#12385,1.);+#12385 = DIRECTION('',(1.,0.));+#12386 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12387 = ORIENTED_EDGE('',*,*,#12295,.F.);+#12388 = ADVANCED_FACE('',(#12389),#7686,.T.);+#12389 = FACE_BOUND('',#12390,.T.);+#12390 = EDGE_LOOP('',(#12391,#12392,#12415,#12436));+#12391 = ORIENTED_EDGE('',*,*,#7671,.F.);+#12392 = ORIENTED_EDGE('',*,*,#12393,.T.);+#12393 = EDGE_CURVE('',#7646,#12394,#12396,.T.);+#12394 = VERTEX_POINT('',#12395);+#12395 = CARTESIAN_POINT('',(0.736745896112,0.149388020833,0.97));+#12396 = SURFACE_CURVE('',#12397,(#12401,#12408),.PCURVE_S1.);+#12397 = LINE('',#12398,#12399);+#12398 = CARTESIAN_POINT('',(0.736745896112,0.149388020833,1.07));+#12399 = VECTOR('',#12400,1.);+#12400 = DIRECTION('',(-0.,-0.,-1.));+#12401 = PCURVE('',#7686,#12402);+#12402 = DEFINITIONAL_REPRESENTATION('',(#12403),#12407);+#12403 = LINE('',#12404,#12405);+#12404 = CARTESIAN_POINT('',(0.,0.));+#12405 = VECTOR('',#12406,1.);+#12406 = DIRECTION('',(0.,-1.));+#12407 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12408 = PCURVE('',#7660,#12409);+#12409 = DEFINITIONAL_REPRESENTATION('',(#12410),#12414);+#12410 = LINE('',#12411,#12412);+#12411 = CARTESIAN_POINT('',(3.849028087798E-02,0.));+#12412 = VECTOR('',#12413,1.);+#12413 = DIRECTION('',(0.,-1.));+#12414 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12415 = ORIENTED_EDGE('',*,*,#12416,.T.);+#12416 = EDGE_CURVE('',#12394,#12345,#12417,.T.);+#12417 = SURFACE_CURVE('',#12418,(#12422,#12429),.PCURVE_S1.);+#12418 = LINE('',#12419,#12420);+#12419 = CARTESIAN_POINT('',(0.736745896112,0.149388020833,0.97));+#12420 = VECTOR('',#12421,1.);+#12421 = DIRECTION('',(0.,-1.,0.));+#12422 = PCURVE('',#7686,#12423);+#12423 = DEFINITIONAL_REPRESENTATION('',(#12424),#12428);+#12424 = LINE('',#12425,#12426);+#12425 = CARTESIAN_POINT('',(0.,-0.1));+#12426 = VECTOR('',#12427,1.);+#12427 = DIRECTION('',(1.,0.));+#12428 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12429 = PCURVE('',#12258,#12430);+#12430 = DEFINITIONAL_REPRESENTATION('',(#12431),#12435);+#12431 = LINE('',#12432,#12433);+#12432 = CARTESIAN_POINT('',(0.149388020833,0.284485095796));+#12433 = VECTOR('',#12434,1.);+#12434 = DIRECTION('',(0.,-1.));+#12435 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12436 = ORIENTED_EDGE('',*,*,#12344,.F.);+#12437 = ADVANCED_FACE('',(#12438),#7660,.T.);+#12438 = FACE_BOUND('',#12439,.T.);+#12439 = EDGE_LOOP('',(#12440,#12441,#12464,#12485));+#12440 = ORIENTED_EDGE('',*,*,#7645,.F.);+#12441 = ORIENTED_EDGE('',*,*,#12442,.T.);+#12442 = EDGE_CURVE('',#7620,#12443,#12445,.T.);+#12443 = VERTEX_POINT('',#12444);+#12444 = CARTESIAN_POINT('',(0.698255615234,0.149388020833,0.97));+#12445 = SURFACE_CURVE('',#12446,(#12450,#12457),.PCURVE_S1.);+#12446 = LINE('',#12447,#12448);+#12447 = CARTESIAN_POINT('',(0.698255615234,0.149388020833,1.07));+#12448 = VECTOR('',#12449,1.);+#12449 = DIRECTION('',(-0.,-0.,-1.));+#12450 = PCURVE('',#7660,#12451);+#12451 = DEFINITIONAL_REPRESENTATION('',(#12452),#12456);+#12452 = LINE('',#12453,#12454);+#12453 = CARTESIAN_POINT('',(0.,0.));+#12454 = VECTOR('',#12455,1.);+#12455 = DIRECTION('',(0.,-1.));+#12456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12457 = PCURVE('',#7634,#12458);+#12458 = DEFINITIONAL_REPRESENTATION('',(#12459),#12463);+#12459 = LINE('',#12460,#12461);+#12460 = CARTESIAN_POINT('',(6.555777472869E-02,0.));+#12461 = VECTOR('',#12462,1.);+#12462 = DIRECTION('',(0.,-1.));+#12463 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12464 = ORIENTED_EDGE('',*,*,#12465,.T.);+#12465 = EDGE_CURVE('',#12443,#12394,#12466,.T.);+#12466 = SURFACE_CURVE('',#12467,(#12471,#12478),.PCURVE_S1.);+#12467 = LINE('',#12468,#12469);+#12468 = CARTESIAN_POINT('',(0.698255615234,0.149388020833,0.97));+#12469 = VECTOR('',#12470,1.);+#12470 = DIRECTION('',(1.,0.,0.));+#12471 = PCURVE('',#7660,#12472);+#12472 = DEFINITIONAL_REPRESENTATION('',(#12473),#12477);+#12473 = LINE('',#12474,#12475);+#12474 = CARTESIAN_POINT('',(0.,-0.1));+#12475 = VECTOR('',#12476,1.);+#12476 = DIRECTION('',(1.,0.));+#12477 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12478 = PCURVE('',#12258,#12479);+#12479 = DEFINITIONAL_REPRESENTATION('',(#12480),#12484);+#12480 = LINE('',#12481,#12482);+#12481 = CARTESIAN_POINT('',(0.110897739955,0.284485095796));+#12482 = VECTOR('',#12483,1.);+#12483 = DIRECTION('',(1.,0.));+#12484 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12485 = ORIENTED_EDGE('',*,*,#12393,.F.);+#12486 = ADVANCED_FACE('',(#12487),#7634,.T.);+#12487 = FACE_BOUND('',#12488,.T.);+#12488 = EDGE_LOOP('',(#12489,#12490,#12513,#12534));+#12489 = ORIENTED_EDGE('',*,*,#7619,.F.);+#12490 = ORIENTED_EDGE('',*,*,#12491,.T.);+#12491 = EDGE_CURVE('',#7594,#12492,#12494,.T.);+#12492 = VERTEX_POINT('',#12493);+#12493 = CARTESIAN_POINT('',(0.634232177734,0.135287620908,0.97));+#12494 = SURFACE_CURVE('',#12495,(#12499,#12506),.PCURVE_S1.);+#12495 = LINE('',#12496,#12497);+#12496 = CARTESIAN_POINT('',(0.634232177734,0.135287620908,1.07));+#12497 = VECTOR('',#12498,1.);+#12498 = DIRECTION('',(-0.,-0.,-1.));+#12499 = PCURVE('',#7634,#12500);+#12500 = DEFINITIONAL_REPRESENTATION('',(#12501),#12505);+#12501 = LINE('',#12502,#12503);+#12502 = CARTESIAN_POINT('',(0.,0.));+#12503 = VECTOR('',#12504,1.);+#12504 = DIRECTION('',(0.,-1.));+#12505 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12506 = PCURVE('',#7608,#12507);+#12507 = DEFINITIONAL_REPRESENTATION('',(#12508),#12512);+#12508 = LINE('',#12509,#12510);+#12509 = CARTESIAN_POINT('',(3.506045386905E-02,0.));+#12510 = VECTOR('',#12511,1.);+#12511 = DIRECTION('',(0.,-1.));+#12512 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12513 = ORIENTED_EDGE('',*,*,#12514,.T.);+#12514 = EDGE_CURVE('',#12492,#12443,#12515,.T.);+#12515 = SURFACE_CURVE('',#12516,(#12520,#12527),.PCURVE_S1.);+#12516 = LINE('',#12517,#12518);+#12517 = CARTESIAN_POINT('',(0.634232177734,0.135287620908,0.97));+#12518 = VECTOR('',#12519,1.);+#12519 = DIRECTION('',(0.976595648113,0.215083565358,0.));+#12520 = PCURVE('',#7634,#12521);+#12521 = DEFINITIONAL_REPRESENTATION('',(#12522),#12526);+#12522 = LINE('',#12523,#12524);+#12523 = CARTESIAN_POINT('',(0.,-0.1));+#12524 = VECTOR('',#12525,1.);+#12525 = DIRECTION('',(1.,0.));+#12526 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12527 = PCURVE('',#12258,#12528);+#12528 = DEFINITIONAL_REPRESENTATION('',(#12529),#12533);+#12529 = LINE('',#12530,#12531);+#12530 = CARTESIAN_POINT('',(4.687430245536E-02,0.270384695871));+#12531 = VECTOR('',#12532,1.);+#12532 = DIRECTION('',(0.976595648113,0.215083565358));+#12533 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12534 = ORIENTED_EDGE('',*,*,#12442,.F.);+#12535 = ADVANCED_FACE('',(#12536),#7608,.T.);+#12536 = FACE_BOUND('',#12537,.T.);+#12537 = EDGE_LOOP('',(#12538,#12539,#12562,#12583));+#12538 = ORIENTED_EDGE('',*,*,#7593,.F.);+#12539 = ORIENTED_EDGE('',*,*,#12540,.T.);+#12540 = EDGE_CURVE('',#7568,#12541,#12543,.T.);+#12541 = VERTEX_POINT('',#12542);+#12542 = CARTESIAN_POINT('',(0.634232177734,0.100227167039,0.97));+#12543 = SURFACE_CURVE('',#12544,(#12548,#12555),.PCURVE_S1.);+#12544 = LINE('',#12545,#12546);+#12545 = CARTESIAN_POINT('',(0.634232177734,0.100227167039,1.07));+#12546 = VECTOR('',#12547,1.);+#12547 = DIRECTION('',(-0.,-0.,-1.));+#12548 = PCURVE('',#7608,#12549);+#12549 = DEFINITIONAL_REPRESENTATION('',(#12550),#12554);+#12550 = LINE('',#12551,#12552);+#12551 = CARTESIAN_POINT('',(0.,0.));+#12552 = VECTOR('',#12553,1.);+#12553 = DIRECTION('',(0.,-1.));+#12554 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12555 = PCURVE('',#7582,#12556);+#12556 = DEFINITIONAL_REPRESENTATION('',(#12557),#12561);+#12557 = LINE('',#12558,#12559);+#12558 = CARTESIAN_POINT('',(6.601255192108E-02,0.));+#12559 = VECTOR('',#12560,1.);+#12560 = DIRECTION('',(0.,-1.));+#12561 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12562 = ORIENTED_EDGE('',*,*,#12563,.T.);+#12563 = EDGE_CURVE('',#12541,#12492,#12564,.T.);+#12564 = SURFACE_CURVE('',#12565,(#12569,#12576),.PCURVE_S1.);+#12565 = LINE('',#12566,#12567);+#12566 = CARTESIAN_POINT('',(0.634232177734,0.100227167039,0.97));+#12567 = VECTOR('',#12568,1.);+#12568 = DIRECTION('',(0.,1.,0.));+#12569 = PCURVE('',#7608,#12570);+#12570 = DEFINITIONAL_REPRESENTATION('',(#12571),#12575);+#12571 = LINE('',#12572,#12573);+#12572 = CARTESIAN_POINT('',(0.,-0.1));+#12573 = VECTOR('',#12574,1.);+#12574 = DIRECTION('',(1.,0.));+#12575 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12576 = PCURVE('',#12258,#12577);+#12577 = DEFINITIONAL_REPRESENTATION('',(#12578),#12582);+#12578 = LINE('',#12579,#12580);+#12579 = CARTESIAN_POINT('',(4.687430245536E-02,0.235324242001));+#12580 = VECTOR('',#12581,1.);+#12581 = DIRECTION('',(0.,1.));+#12582 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12583 = ORIENTED_EDGE('',*,*,#12491,.F.);+#12584 = ADVANCED_FACE('',(#12585),#7582,.T.);+#12585 = FACE_BOUND('',#12586,.T.);+#12586 = EDGE_LOOP('',(#12587,#12588,#12611,#12632));+#12587 = ORIENTED_EDGE('',*,*,#7567,.F.);+#12588 = ORIENTED_EDGE('',*,*,#12589,.T.);+#12589 = EDGE_CURVE('',#7542,#12590,#12592,.T.);+#12590 = VERTEX_POINT('',#12591);+#12591 = CARTESIAN_POINT('',(0.698636707124,0.114708658854,0.97));+#12592 = SURFACE_CURVE('',#12593,(#12597,#12604),.PCURVE_S1.);+#12593 = LINE('',#12594,#12595);+#12594 = CARTESIAN_POINT('',(0.698636707124,0.114708658854,1.07));+#12595 = VECTOR('',#12596,1.);+#12596 = DIRECTION('',(-0.,-0.,-1.));+#12597 = PCURVE('',#7582,#12598);+#12598 = DEFINITIONAL_REPRESENTATION('',(#12599),#12603);+#12599 = LINE('',#12600,#12601);+#12600 = CARTESIAN_POINT('',(0.,0.));+#12601 = VECTOR('',#12602,1.);+#12602 = DIRECTION('',(0.,-1.));+#12603 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12604 = PCURVE('',#7556,#12605);+#12605 = DEFINITIONAL_REPRESENTATION('',(#12606),#12610);+#12606 = LINE('',#12607,#12608);+#12607 = CARTESIAN_POINT('',(0.217412923177,0.));+#12608 = VECTOR('',#12609,1.);+#12609 = DIRECTION('',(0.,-1.));+#12610 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12611 = ORIENTED_EDGE('',*,*,#12612,.T.);+#12612 = EDGE_CURVE('',#12590,#12541,#12613,.T.);+#12613 = SURFACE_CURVE('',#12614,(#12618,#12625),.PCURVE_S1.);+#12614 = LINE('',#12615,#12616);+#12615 = CARTESIAN_POINT('',(0.698636707124,0.114708658854,0.97));+#12616 = VECTOR('',#12617,1.);+#12617 = DIRECTION('',(-0.97564065493,-0.219374821819,0.));+#12618 = PCURVE('',#7582,#12619);+#12619 = DEFINITIONAL_REPRESENTATION('',(#12620),#12624);+#12620 = LINE('',#12621,#12622);+#12621 = CARTESIAN_POINT('',(-0.,-0.1));+#12622 = VECTOR('',#12623,1.);+#12623 = DIRECTION('',(1.,0.));+#12624 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12625 = PCURVE('',#12258,#12626);+#12626 = DEFINITIONAL_REPRESENTATION('',(#12627),#12631);+#12627 = LINE('',#12628,#12629);+#12628 = CARTESIAN_POINT('',(0.111278831845,0.249805733817));+#12629 = VECTOR('',#12630,1.);+#12630 = DIRECTION('',(-0.97564065493,-0.219374821819));+#12631 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12632 = ORIENTED_EDGE('',*,*,#12540,.F.);+#12633 = ADVANCED_FACE('',(#12634),#7556,.T.);+#12634 = FACE_BOUND('',#12635,.T.);+#12635 = EDGE_LOOP('',(#12636,#12637,#12660,#12681));+#12636 = ORIENTED_EDGE('',*,*,#7541,.F.);+#12637 = ORIENTED_EDGE('',*,*,#12638,.T.);+#12638 = EDGE_CURVE('',#7516,#12639,#12641,.T.);+#12639 = VERTEX_POINT('',#12640);+#12640 = CARTESIAN_POINT('',(0.698636707124,-0.102704264323,0.97));+#12641 = SURFACE_CURVE('',#12642,(#12646,#12653),.PCURVE_S1.);+#12642 = LINE('',#12643,#12644);+#12643 = CARTESIAN_POINT('',(0.698636707124,-0.102704264323,1.07));+#12644 = VECTOR('',#12645,1.);+#12645 = DIRECTION('',(-0.,-0.,-1.));+#12646 = PCURVE('',#7556,#12647);+#12647 = DEFINITIONAL_REPRESENTATION('',(#12648),#12652);+#12648 = LINE('',#12649,#12650);+#12649 = CARTESIAN_POINT('',(0.,0.));+#12650 = VECTOR('',#12651,1.);+#12651 = DIRECTION('',(0.,-1.));+#12652 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12653 = PCURVE('',#7530,#12654);+#12654 = DEFINITIONAL_REPRESENTATION('',(#12655),#12659);+#12655 = LINE('',#12656,#12657);+#12656 = CARTESIAN_POINT('',(5.983142671131E-02,0.));+#12657 = VECTOR('',#12658,1.);+#12658 = DIRECTION('',(0.,-1.));+#12659 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12660 = ORIENTED_EDGE('',*,*,#12661,.T.);+#12661 = EDGE_CURVE('',#12639,#12590,#12662,.T.);+#12662 = SURFACE_CURVE('',#12663,(#12667,#12674),.PCURVE_S1.);+#12663 = LINE('',#12664,#12665);+#12664 = CARTESIAN_POINT('',(0.698636707124,-0.102704264323,0.97));+#12665 = VECTOR('',#12666,1.);+#12666 = DIRECTION('',(0.,1.,0.));+#12667 = PCURVE('',#7556,#12668);+#12668 = DEFINITIONAL_REPRESENTATION('',(#12669),#12673);+#12669 = LINE('',#12670,#12671);+#12670 = CARTESIAN_POINT('',(0.,-0.1));+#12671 = VECTOR('',#12672,1.);+#12672 = DIRECTION('',(1.,0.));+#12673 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12674 = PCURVE('',#12258,#12675);+#12675 = DEFINITIONAL_REPRESENTATION('',(#12676),#12680);+#12676 = LINE('',#12677,#12678);+#12677 = CARTESIAN_POINT('',(0.111278831845,3.239281063988E-02));+#12678 = VECTOR('',#12679,1.);+#12679 = DIRECTION('',(0.,1.));+#12680 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12681 = ORIENTED_EDGE('',*,*,#12589,.F.);+#12682 = ADVANCED_FACE('',(#12683),#7530,.T.);+#12683 = FACE_BOUND('',#12684,.T.);+#12684 = EDGE_LOOP('',(#12685,#12686,#12709,#12730));+#12685 = ORIENTED_EDGE('',*,*,#7515,.F.);+#12686 = ORIENTED_EDGE('',*,*,#12687,.T.);+#12687 = EDGE_CURVE('',#7490,#12688,#12690,.T.);+#12688 = VERTEX_POINT('',#12689);+#12689 = CARTESIAN_POINT('',(0.638805280413,-0.102704264323,0.97));+#12690 = SURFACE_CURVE('',#12691,(#12695,#12702),.PCURVE_S1.);+#12691 = LINE('',#12692,#12693);+#12692 = CARTESIAN_POINT('',(0.638805280413,-0.102704264323,1.07));+#12693 = VECTOR('',#12694,1.);+#12694 = DIRECTION('',(-0.,-0.,-1.));+#12695 = PCURVE('',#7530,#12696);+#12696 = DEFINITIONAL_REPRESENTATION('',(#12697),#12701);+#12697 = LINE('',#12698,#12699);+#12698 = CARTESIAN_POINT('',(0.,0.));+#12699 = VECTOR('',#12700,1.);+#12700 = DIRECTION('',(0.,-1.));+#12701 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12702 = PCURVE('',#7504,#12703);+#12703 = DEFINITIONAL_REPRESENTATION('',(#12704),#12708);+#12704 = LINE('',#12705,#12706);+#12705 = CARTESIAN_POINT('',(3.239281063988E-02,0.));+#12706 = VECTOR('',#12707,1.);+#12707 = DIRECTION('',(0.,-1.));+#12708 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12709 = ORIENTED_EDGE('',*,*,#12710,.T.);+#12710 = EDGE_CURVE('',#12688,#12639,#12711,.T.);+#12711 = SURFACE_CURVE('',#12712,(#12716,#12723),.PCURVE_S1.);+#12712 = LINE('',#12713,#12714);+#12713 = CARTESIAN_POINT('',(0.638805280413,-0.102704264323,0.97));+#12714 = VECTOR('',#12715,1.);+#12715 = DIRECTION('',(1.,0.,0.));+#12716 = PCURVE('',#7530,#12717);+#12717 = DEFINITIONAL_REPRESENTATION('',(#12718),#12722);+#12718 = LINE('',#12719,#12720);+#12719 = CARTESIAN_POINT('',(0.,-0.1));+#12720 = VECTOR('',#12721,1.);+#12721 = DIRECTION('',(1.,0.));+#12722 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12723 = PCURVE('',#12258,#12724);+#12724 = DEFINITIONAL_REPRESENTATION('',(#12725),#12729);+#12725 = LINE('',#12726,#12727);+#12726 = CARTESIAN_POINT('',(5.144740513393E-02,3.239281063988E-02));+#12727 = VECTOR('',#12728,1.);+#12728 = DIRECTION('',(1.,0.));+#12729 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12730 = ORIENTED_EDGE('',*,*,#12638,.F.);+#12731 = ADVANCED_FACE('',(#12732),#7504,.T.);+#12732 = FACE_BOUND('',#12733,.T.);+#12733 = EDGE_LOOP('',(#12734,#12735,#12736,#12757));+#12734 = ORIENTED_EDGE('',*,*,#7489,.F.);+#12735 = ORIENTED_EDGE('',*,*,#12270,.T.);+#12736 = ORIENTED_EDGE('',*,*,#12737,.T.);+#12737 = EDGE_CURVE('',#12243,#12688,#12738,.T.);+#12738 = SURFACE_CURVE('',#12739,(#12743,#12750),.PCURVE_S1.);+#12739 = LINE('',#12740,#12741);+#12740 = CARTESIAN_POINT('',(0.638805280413,-0.135097074963,0.97));+#12741 = VECTOR('',#12742,1.);+#12742 = DIRECTION('',(0.,1.,0.));+#12743 = PCURVE('',#7504,#12744);+#12744 = DEFINITIONAL_REPRESENTATION('',(#12745),#12749);+#12745 = LINE('',#12746,#12747);+#12746 = CARTESIAN_POINT('',(0.,-0.1));+#12747 = VECTOR('',#12748,1.);+#12748 = DIRECTION('',(1.,0.));+#12749 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12750 = PCURVE('',#12258,#12751);+#12751 = DEFINITIONAL_REPRESENTATION('',(#12752),#12756);+#12752 = LINE('',#12753,#12754);+#12753 = CARTESIAN_POINT('',(5.144740513393E-02,0.));+#12754 = VECTOR('',#12755,1.);+#12755 = DIRECTION('',(0.,1.));+#12756 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12757 = ORIENTED_EDGE('',*,*,#12687,.F.);+#12758 = ADVANCED_FACE('',(#12759),#8398,.T.);+#12759 = FACE_BOUND('',#12760,.T.);+#12760 = EDGE_LOOP('',(#12761));+#12761 = ORIENTED_EDGE('',*,*,#8383,.T.);+#12762 = ADVANCED_FACE('',(#12763),#8455,.T.);+#12763 = FACE_BOUND('',#12764,.F.);+#12764 = EDGE_LOOP('',(#12765,#12766,#12767,#12768,#12769,#12770,#12771,+ #12772));+#12765 = ORIENTED_EDGE('',*,*,#8787,.T.);+#12766 = ORIENTED_EDGE('',*,*,#8760,.T.);+#12767 = ORIENTED_EDGE('',*,*,#8711,.T.);+#12768 = ORIENTED_EDGE('',*,*,#8662,.T.);+#12769 = ORIENTED_EDGE('',*,*,#8613,.T.);+#12770 = ORIENTED_EDGE('',*,*,#8564,.T.);+#12771 = ORIENTED_EDGE('',*,*,#8515,.T.);+#12772 = ORIENTED_EDGE('',*,*,#8439,.T.);+#12773 = ADVANCED_FACE('',(#12774,#12785),#8852,.T.);+#12774 = FACE_BOUND('',#12775,.F.);+#12775 = EDGE_LOOP('',(#12776,#12777,#12778,#12779,#12780,#12781,#12782,+ #12783,#12784));+#12776 = ORIENTED_EDGE('',*,*,#9233,.T.);+#12777 = ORIENTED_EDGE('',*,*,#9206,.T.);+#12778 = ORIENTED_EDGE('',*,*,#9157,.T.);+#12779 = ORIENTED_EDGE('',*,*,#9108,.T.);+#12780 = ORIENTED_EDGE('',*,*,#9059,.T.);+#12781 = ORIENTED_EDGE('',*,*,#9010,.T.);+#12782 = ORIENTED_EDGE('',*,*,#8961,.T.);+#12783 = ORIENTED_EDGE('',*,*,#8912,.T.);+#12784 = ORIENTED_EDGE('',*,*,#8836,.T.);+#12785 = FACE_BOUND('',#12786,.F.);+#12786 = EDGE_LOOP('',(#12787,#12817,#12845,#12873,#12903,#12933,#12963)+ );+#12787 = ORIENTED_EDGE('',*,*,#12788,.T.);+#12788 = EDGE_CURVE('',#12789,#12791,#12793,.T.);+#12789 = VERTEX_POINT('',#12790);+#12790 = CARTESIAN_POINT('',(-0.466742292132,0.117757393973,0.97));+#12791 = VERTEX_POINT('',#12792);+#12792 = CARTESIAN_POINT('',(-0.511330043248,0.117757393973,0.97));+#12793 = SURFACE_CURVE('',#12794,(#12798,#12805),.PCURVE_S1.);+#12794 = LINE('',#12795,#12796);+#12795 = CARTESIAN_POINT('',(-0.466742292132,0.117757393973,0.97));+#12796 = VECTOR('',#12797,1.);+#12797 = DIRECTION('',(-1.,0.,0.));+#12798 = PCURVE('',#8852,#12799);+#12799 = DEFINITIONAL_REPRESENTATION('',(#12800),#12804);+#12800 = LINE('',#12801,#12802);+#12801 = CARTESIAN_POINT('',(0.120615583147,0.252854468936));+#12802 = VECTOR('',#12803,1.);+#12803 = DIRECTION('',(-1.,0.));+#12804 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12805 = PCURVE('',#12806,#12811);+#12806 = PLANE('',#12807);+#12807 = AXIS2_PLACEMENT_3D('',#12808,#12809,#12810);+#12808 = CARTESIAN_POINT('',(-0.466742292132,0.117757393973,1.07));+#12809 = DIRECTION('',(0.,1.,0.));+#12810 = DIRECTION('',(-1.,0.,0.));+#12811 = DEFINITIONAL_REPRESENTATION('',(#12812),#12816);+#12812 = LINE('',#12813,#12814);+#12813 = CARTESIAN_POINT('',(0.,-0.1));+#12814 = VECTOR('',#12815,1.);+#12815 = DIRECTION('',(1.,0.));+#12816 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12817 = ORIENTED_EDGE('',*,*,#12818,.T.);+#12818 = EDGE_CURVE('',#12791,#12819,#12821,.T.);+#12819 = VERTEX_POINT('',#12820);+#12820 = CARTESIAN_POINT('',(-0.511330043248,1.086111886161E-02,0.97));+#12821 = SURFACE_CURVE('',#12822,(#12826,#12833),.PCURVE_S1.);+#12822 = LINE('',#12823,#12824);+#12823 = CARTESIAN_POINT('',(-0.511330043248,0.117757393973,0.97));+#12824 = VECTOR('',#12825,1.);+#12825 = DIRECTION('',(0.,-1.,0.));+#12826 = PCURVE('',#8852,#12827);+#12827 = DEFINITIONAL_REPRESENTATION('',(#12828),#12832);+#12828 = LINE('',#12829,#12830);+#12829 = CARTESIAN_POINT('',(7.602783203125E-02,0.252854468936));+#12830 = VECTOR('',#12831,1.);+#12831 = DIRECTION('',(0.,-1.));+#12832 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12833 = PCURVE('',#12834,#12839);+#12834 = PLANE('',#12835);+#12835 = AXIS2_PLACEMENT_3D('',#12836,#12837,#12838);+#12836 = CARTESIAN_POINT('',(-0.511330043248,0.117757393973,1.07));+#12837 = DIRECTION('',(-1.,0.,0.));+#12838 = DIRECTION('',(0.,-1.,0.));+#12839 = DEFINITIONAL_REPRESENTATION('',(#12840),#12844);+#12840 = LINE('',#12841,#12842);+#12841 = CARTESIAN_POINT('',(0.,-0.1));+#12842 = VECTOR('',#12843,1.);+#12843 = DIRECTION('',(1.,0.));+#12844 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12845 = ORIENTED_EDGE('',*,*,#12846,.T.);+#12846 = EDGE_CURVE('',#12819,#12847,#12849,.T.);+#12847 = VERTEX_POINT('',#12848);+#12848 = CARTESIAN_POINT('',(-0.466742292132,1.086111886161E-02,0.97));+#12849 = SURFACE_CURVE('',#12850,(#12854,#12861),.PCURVE_S1.);+#12850 = LINE('',#12851,#12852);+#12851 = CARTESIAN_POINT('',(-0.511330043248,1.086111886161E-02,0.97));+#12852 = VECTOR('',#12853,1.);+#12853 = DIRECTION('',(1.,0.,0.));+#12854 = PCURVE('',#8852,#12855);+#12855 = DEFINITIONAL_REPRESENTATION('',(#12856),#12860);+#12856 = LINE('',#12857,#12858);+#12857 = CARTESIAN_POINT('',(7.602783203125E-02,0.145958193824));+#12858 = VECTOR('',#12859,1.);+#12859 = DIRECTION('',(1.,0.));+#12860 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12861 = PCURVE('',#12862,#12867);+#12862 = PLANE('',#12863);+#12863 = AXIS2_PLACEMENT_3D('',#12864,#12865,#12866);+#12864 = CARTESIAN_POINT('',(-0.511330043248,1.086111886161E-02,1.07));+#12865 = DIRECTION('',(0.,-1.,0.));+#12866 = DIRECTION('',(1.,0.,0.));+#12867 = DEFINITIONAL_REPRESENTATION('',(#12868),#12872);+#12868 = LINE('',#12869,#12870);+#12869 = CARTESIAN_POINT('',(0.,-0.1));+#12870 = VECTOR('',#12871,1.);+#12871 = DIRECTION('',(1.,0.));+#12872 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12873 = ORIENTED_EDGE('',*,*,#12874,.T.);+#12874 = EDGE_CURVE('',#12847,#12875,#12877,.T.);+#12875 = VERTEX_POINT('',#12876);+#12876 = CARTESIAN_POINT('',(-0.425108003162,2.49615187872E-02,0.97));+#12877 = SURFACE_CURVE('',#12878,(#12882,#12889),.PCURVE_S1.);+#12878 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12879,#12880,#12881),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12879 = CARTESIAN_POINT('',(-0.466742292132,1.086111886161E-02,0.97));+#12880 = CARTESIAN_POINT('',(-0.44006585984,1.086111886161E-02,0.97));+#12881 = CARTESIAN_POINT('',(-0.425108003162,2.49615187872E-02,0.97));+#12882 = PCURVE('',#8852,#12883);+#12883 = DEFINITIONAL_REPRESENTATION('',(#12884),#12888);+#12884 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12885,#12886,#12887),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12885 = CARTESIAN_POINT('',(0.120615583147,0.145958193824));+#12886 = CARTESIAN_POINT('',(0.147292015439,0.145958193824));+#12887 = CARTESIAN_POINT('',(0.162249872117,0.16005859375));+#12888 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12889 = PCURVE('',#12890,#12897);+#12890 = SURFACE_OF_LINEAR_EXTRUSION('',#12891,#12895);+#12891 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12892,#12893,#12894),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12892 = CARTESIAN_POINT('',(-0.466742292132,1.086111886161E-02,1.07));+#12893 = CARTESIAN_POINT('',(-0.44006585984,1.086111886161E-02,1.07));+#12894 = CARTESIAN_POINT('',(-0.425108003162,2.49615187872E-02,1.07));+#12895 = VECTOR('',#12896,1.);+#12896 = DIRECTION('',(0.,0.,1.));+#12897 = DEFINITIONAL_REPRESENTATION('',(#12898),#12902);+#12898 = LINE('',#12899,#12900);+#12899 = CARTESIAN_POINT('',(0.,-0.1));+#12900 = VECTOR('',#12901,1.);+#12901 = DIRECTION('',(1.,0.));+#12902 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12903 = ORIENTED_EDGE('',*,*,#12904,.T.);+#12904 = EDGE_CURVE('',#12875,#12905,#12907,.T.);+#12905 = VERTEX_POINT('',#12906);+#12906 = CARTESIAN_POINT('',(-0.410150146484,6.440452938988E-02,0.97));+#12907 = SURFACE_CURVE('',#12908,(#12912,#12919),.PCURVE_S1.);+#12908 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12909,#12910,#12911),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12909 = CARTESIAN_POINT('',(-0.425108003162,2.49615187872E-02,0.97));+#12910 = CARTESIAN_POINT('',(-0.410150146484,3.90619187128E-02,0.97));+#12911 = CARTESIAN_POINT('',(-0.410150146484,6.440452938988E-02,0.97));+#12912 = PCURVE('',#8852,#12913);+#12913 = DEFINITIONAL_REPRESENTATION('',(#12914),#12918);+#12914 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12915,#12916,#12917),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12915 = CARTESIAN_POINT('',(0.162249872117,0.16005859375));+#12916 = CARTESIAN_POINT('',(0.177207728795,0.174158993676));+#12917 = CARTESIAN_POINT('',(0.177207728795,0.199501604353));+#12918 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12919 = PCURVE('',#12920,#12927);+#12920 = SURFACE_OF_LINEAR_EXTRUSION('',#12921,#12925);+#12921 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12922,#12923,#12924),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12922 = CARTESIAN_POINT('',(-0.425108003162,2.49615187872E-02,1.07));+#12923 = CARTESIAN_POINT('',(-0.410150146484,3.90619187128E-02,1.07));+#12924 = CARTESIAN_POINT('',(-0.410150146484,6.440452938988E-02,1.07));+#12925 = VECTOR('',#12926,1.);+#12926 = DIRECTION('',(0.,0.,1.));+#12927 = DEFINITIONAL_REPRESENTATION('',(#12928),#12932);+#12928 = LINE('',#12929,#12930);+#12929 = CARTESIAN_POINT('',(0.,-0.1));+#12930 = VECTOR('',#12931,1.);+#12931 = DIRECTION('',(1.,0.));+#12932 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12933 = ORIENTED_EDGE('',*,*,#12934,.T.);+#12934 = EDGE_CURVE('',#12905,#12935,#12937,.T.);+#12935 = VERTEX_POINT('',#12936);+#12936 = CARTESIAN_POINT('',(-0.42501273019,0.10375226702,0.97));+#12937 = SURFACE_CURVE('',#12938,(#12942,#12949),.PCURVE_S1.);+#12938 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12939,#12940,#12941),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12939 = CARTESIAN_POINT('',(-0.410150146484,6.440452938988E-02,0.97));+#12940 = CARTESIAN_POINT('',(-0.410150146484,8.974714006696E-02,0.97));+#12941 = CARTESIAN_POINT('',(-0.42501273019,0.10375226702,0.97));+#12942 = PCURVE('',#8852,#12943);+#12943 = DEFINITIONAL_REPRESENTATION('',(#12944),#12948);+#12944 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12945,#12946,#12947),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12945 = CARTESIAN_POINT('',(0.177207728795,0.199501604353));+#12946 = CARTESIAN_POINT('',(0.177207728795,0.22484421503));+#12947 = CARTESIAN_POINT('',(0.162345145089,0.238849341983));+#12948 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12949 = PCURVE('',#12950,#12957);+#12950 = SURFACE_OF_LINEAR_EXTRUSION('',#12951,#12955);+#12951 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12952,#12953,#12954),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12952 = CARTESIAN_POINT('',(-0.410150146484,6.440452938988E-02,1.07));+#12953 = CARTESIAN_POINT('',(-0.410150146484,8.974714006696E-02,1.07));+#12954 = CARTESIAN_POINT('',(-0.42501273019,0.10375226702,1.07));+#12955 = VECTOR('',#12956,1.);+#12956 = DIRECTION('',(0.,0.,1.));+#12957 = DEFINITIONAL_REPRESENTATION('',(#12958),#12962);+#12958 = LINE('',#12959,#12960);+#12959 = CARTESIAN_POINT('',(0.,-0.1));+#12960 = VECTOR('',#12961,1.);+#12961 = DIRECTION('',(1.,0.));+#12962 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12963 = ORIENTED_EDGE('',*,*,#12964,.T.);+#12964 = EDGE_CURVE('',#12935,#12789,#12965,.T.);+#12965 = SURFACE_CURVE('',#12966,(#12970,#12977),.PCURVE_S1.);+#12966 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12967,#12968,#12969),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12967 = CARTESIAN_POINT('',(-0.42501273019,0.10375226702,0.97));+#12968 = CARTESIAN_POINT('',(-0.439875313895,0.117757393973,0.97));+#12969 = CARTESIAN_POINT('',(-0.466742292132,0.117757393973,0.97));+#12970 = PCURVE('',#8852,#12971);+#12971 = DEFINITIONAL_REPRESENTATION('',(#12972),#12976);+#12972 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12973,#12974,#12975),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12973 = CARTESIAN_POINT('',(0.162345145089,0.238849341983));+#12974 = CARTESIAN_POINT('',(0.147482561384,0.252854468936));+#12975 = CARTESIAN_POINT('',(0.120615583147,0.252854468936));+#12976 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12977 = PCURVE('',#12978,#12985);+#12978 = SURFACE_OF_LINEAR_EXTRUSION('',#12979,#12983);+#12979 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12980,#12981,#12982),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12980 = CARTESIAN_POINT('',(-0.42501273019,0.10375226702,1.07));+#12981 = CARTESIAN_POINT('',(-0.439875313895,0.117757393973,1.07));+#12982 = CARTESIAN_POINT('',(-0.466742292132,0.117757393973,1.07));+#12983 = VECTOR('',#12984,1.);+#12984 = DIRECTION('',(0.,0.,1.));+#12985 = DEFINITIONAL_REPRESENTATION('',(#12986),#12990);+#12986 = LINE('',#12987,#12988);+#12987 = CARTESIAN_POINT('',(0.,-0.1));+#12988 = VECTOR('',#12989,1.);+#12989 = DIRECTION('',(1.,0.));+#12990 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12991 = ADVANCED_FACE('',(#12992),#9298,.T.);+#12992 = FACE_BOUND('',#12993,.F.);+#12993 = EDGE_LOOP('',(#12994,#12995,#12996,#12997,#12998,#12999,#13000,+ #13001,#13002,#13003,#13004,#13005,#13006,#13007,#13008,#13009,+ #13010,#13011,#13012,#13013,#13014,#13015,#13016,#13017,#13018,+ #13019,#13020,#13021));+#12994 = ORIENTED_EDGE('',*,*,#10610,.T.);+#12995 = ORIENTED_EDGE('',*,*,#10583,.T.);+#12996 = ORIENTED_EDGE('',*,*,#10534,.T.);+#12997 = ORIENTED_EDGE('',*,*,#10485,.T.);+#12998 = ORIENTED_EDGE('',*,*,#10436,.T.);+#12999 = ORIENTED_EDGE('',*,*,#10387,.T.);+#13000 = ORIENTED_EDGE('',*,*,#10338,.T.);+#13001 = ORIENTED_EDGE('',*,*,#10289,.T.);+#13002 = ORIENTED_EDGE('',*,*,#10240,.T.);+#13003 = ORIENTED_EDGE('',*,*,#10191,.T.);+#13004 = ORIENTED_EDGE('',*,*,#10142,.T.);+#13005 = ORIENTED_EDGE('',*,*,#10093,.T.);+#13006 = ORIENTED_EDGE('',*,*,#10044,.T.);+#13007 = ORIENTED_EDGE('',*,*,#9995,.T.);+#13008 = ORIENTED_EDGE('',*,*,#9946,.T.);+#13009 = ORIENTED_EDGE('',*,*,#9897,.T.);+#13010 = ORIENTED_EDGE('',*,*,#9848,.T.);+#13011 = ORIENTED_EDGE('',*,*,#9799,.T.);+#13012 = ORIENTED_EDGE('',*,*,#9750,.T.);+#13013 = ORIENTED_EDGE('',*,*,#9701,.T.);+#13014 = ORIENTED_EDGE('',*,*,#9652,.T.);+#13015 = ORIENTED_EDGE('',*,*,#9603,.T.);+#13016 = ORIENTED_EDGE('',*,*,#9554,.T.);+#13017 = ORIENTED_EDGE('',*,*,#9505,.T.);+#13018 = ORIENTED_EDGE('',*,*,#9456,.T.);+#13019 = ORIENTED_EDGE('',*,*,#9407,.T.);+#13020 = ORIENTED_EDGE('',*,*,#9358,.T.);+#13021 = ORIENTED_EDGE('',*,*,#9282,.T.);+#13022 = ADVANCED_FACE('',(#13023),#10675,.T.);+#13023 = FACE_BOUND('',#13024,.F.);+#13024 = EDGE_LOOP('',(#13025,#13026,#13027,#13028,#13029,#13030,#13031)+ );+#13025 = ORIENTED_EDGE('',*,*,#10958,.T.);+#13026 = ORIENTED_EDGE('',*,*,#10931,.T.);+#13027 = ORIENTED_EDGE('',*,*,#10882,.T.);+#13028 = ORIENTED_EDGE('',*,*,#10833,.T.);+#13029 = ORIENTED_EDGE('',*,*,#10784,.T.);+#13030 = ORIENTED_EDGE('',*,*,#10735,.T.);+#13031 = ORIENTED_EDGE('',*,*,#10659,.T.);+#13032 = ADVANCED_FACE('',(#13033,#13043),#11023,.T.);+#13033 = FACE_BOUND('',#13034,.F.);+#13034 = EDGE_LOOP('',(#13035,#13036,#13037,#13038,#13039,#13040,#13041,+ #13042));+#13035 = ORIENTED_EDGE('',*,*,#11355,.T.);+#13036 = ORIENTED_EDGE('',*,*,#11328,.T.);+#13037 = ORIENTED_EDGE('',*,*,#11279,.T.);+#13038 = ORIENTED_EDGE('',*,*,#11230,.T.);+#13039 = ORIENTED_EDGE('',*,*,#11181,.T.);+#13040 = ORIENTED_EDGE('',*,*,#11132,.T.);+#13041 = ORIENTED_EDGE('',*,*,#11083,.T.);+#13042 = ORIENTED_EDGE('',*,*,#11007,.T.);+#13043 = FACE_BOUND('',#13044,.F.);+#13044 = EDGE_LOOP('',(#13045,#13075,#13103));+#13045 = ORIENTED_EDGE('',*,*,#13046,.T.);+#13046 = EDGE_CURVE('',#13047,#13049,#13051,.T.);+#13047 = VERTEX_POINT('',#13048);+#13048 = CARTESIAN_POINT('',(0.275434163411,-3.01062593006E-02,0.97));+#13049 = VERTEX_POINT('',#13050);+#13050 = CARTESIAN_POINT('',(0.234847877139,0.115470842634,0.97));+#13051 = SURFACE_CURVE('',#13052,(#13056,#13063),.PCURVE_S1.);+#13052 = LINE('',#13053,#13054);+#13053 = CARTESIAN_POINT('',(0.275434163411,-3.01062593006E-02,0.97));+#13054 = VECTOR('',#13055,1.);+#13055 = DIRECTION('',(-0.268554134051,0.963264593497,0.));+#13056 = PCURVE('',#11023,#13057);+#13057 = DEFINITIONAL_REPRESENTATION('',(#13058),#13062);+#13058 = LINE('',#13059,#13060);+#13059 = CARTESIAN_POINT('',(0.157962588356,0.104990815662));+#13060 = VECTOR('',#13061,1.);+#13061 = DIRECTION('',(-0.268554134051,0.963264593497));+#13062 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13063 = PCURVE('',#13064,#13069);+#13064 = PLANE('',#13065);+#13065 = AXIS2_PLACEMENT_3D('',#13066,#13067,#13068);+#13066 = CARTESIAN_POINT('',(0.275434163411,-3.01062593006E-02,1.07));+#13067 = DIRECTION('',(0.963264593497,0.268554134051,0.));+#13068 = DIRECTION('',(-0.268554134051,0.963264593497,0.));+#13069 = DEFINITIONAL_REPRESENTATION('',(#13070),#13074);+#13070 = LINE('',#13071,#13072);+#13071 = CARTESIAN_POINT('',(0.,-0.1));+#13072 = VECTOR('',#13073,1.);+#13073 = DIRECTION('',(1.,0.));+#13074 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13075 = ORIENTED_EDGE('',*,*,#13076,.T.);+#13076 = EDGE_CURVE('',#13049,#13077,#13079,.T.);+#13077 = VERTEX_POINT('',#13078);+#13078 = CARTESIAN_POINT('',(0.194261590867,-3.01062593006E-02,0.97));+#13079 = SURFACE_CURVE('',#13080,(#13084,#13091),.PCURVE_S1.);+#13080 = LINE('',#13081,#13082);+#13081 = CARTESIAN_POINT('',(0.234847877139,0.115470842634,0.97));+#13082 = VECTOR('',#13083,1.);+#13083 = DIRECTION('',(-0.268554134051,-0.963264593497,0.));+#13084 = PCURVE('',#11023,#13085);+#13085 = DEFINITIONAL_REPRESENTATION('',(#13086),#13090);+#13086 = LINE('',#13087,#13088);+#13087 = CARTESIAN_POINT('',(0.117376302083,0.250567917597));+#13088 = VECTOR('',#13089,1.);+#13089 = DIRECTION('',(-0.268554134051,-0.963264593497));+#13090 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13091 = PCURVE('',#13092,#13097);+#13092 = PLANE('',#13093);+#13093 = AXIS2_PLACEMENT_3D('',#13094,#13095,#13096);+#13094 = CARTESIAN_POINT('',(0.234847877139,0.115470842634,1.07));+#13095 = DIRECTION('',(-0.963264593497,0.268554134051,0.));+#13096 = DIRECTION('',(-0.268554134051,-0.963264593497,0.));+#13097 = DEFINITIONAL_REPRESENTATION('',(#13098),#13102);+#13098 = LINE('',#13099,#13100);+#13099 = CARTESIAN_POINT('',(-0.,-0.1));+#13100 = VECTOR('',#13101,1.);+#13101 = DIRECTION('',(1.,0.));+#13102 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13103 = ORIENTED_EDGE('',*,*,#13104,.T.);+#13104 = EDGE_CURVE('',#13077,#13047,#13105,.T.);+#13105 = SURFACE_CURVE('',#13106,(#13110,#13117),.PCURVE_S1.);+#13106 = LINE('',#13107,#13108);+#13107 = CARTESIAN_POINT('',(0.194261590867,-3.01062593006E-02,0.97));+#13108 = VECTOR('',#13109,1.);+#13109 = DIRECTION('',(1.,0.,0.));+#13110 = PCURVE('',#11023,#13111);+#13111 = DEFINITIONAL_REPRESENTATION('',(#13112),#13116);+#13112 = LINE('',#13113,#13114);+#13113 = CARTESIAN_POINT('',(7.679001581101E-02,0.104990815662));+#13114 = VECTOR('',#13115,1.);+#13115 = DIRECTION('',(1.,0.));+#13116 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13117 = PCURVE('',#13118,#13123);+#13118 = PLANE('',#13119);+#13119 = AXIS2_PLACEMENT_3D('',#13120,#13121,#13122);+#13120 = CARTESIAN_POINT('',(0.194261590867,-3.01062593006E-02,1.07));+#13121 = DIRECTION('',(0.,-1.,0.));+#13122 = DIRECTION('',(1.,0.,0.));+#13123 = DEFINITIONAL_REPRESENTATION('',(#13124),#13128);+#13124 = LINE('',#13125,#13126);+#13125 = CARTESIAN_POINT('',(0.,-0.1));+#13126 = VECTOR('',#13127,1.);+#13127 = DIRECTION('',(1.,0.));+#13128 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13129 = ADVANCED_FACE('',(#13130,#13149),#11420,.T.);+#13130 = FACE_BOUND('',#13131,.F.);+#13131 = EDGE_LOOP('',(#13132,#13133,#13134,#13135,#13136,#13137,#13138,+ #13139,#13140,#13141,#13142,#13143,#13144,#13145,#13146,#13147,+ #13148));+#13132 = ORIENTED_EDGE('',*,*,#12193,.T.);+#13133 = ORIENTED_EDGE('',*,*,#12166,.T.);+#13134 = ORIENTED_EDGE('',*,*,#12117,.T.);+#13135 = ORIENTED_EDGE('',*,*,#12068,.T.);+#13136 = ORIENTED_EDGE('',*,*,#12019,.T.);+#13137 = ORIENTED_EDGE('',*,*,#11970,.T.);+#13138 = ORIENTED_EDGE('',*,*,#11921,.T.);+#13139 = ORIENTED_EDGE('',*,*,#11872,.T.);+#13140 = ORIENTED_EDGE('',*,*,#11823,.T.);+#13141 = ORIENTED_EDGE('',*,*,#11774,.T.);+#13142 = ORIENTED_EDGE('',*,*,#11725,.T.);+#13143 = ORIENTED_EDGE('',*,*,#11676,.T.);+#13144 = ORIENTED_EDGE('',*,*,#11627,.T.);+#13145 = ORIENTED_EDGE('',*,*,#11578,.T.);+#13146 = ORIENTED_EDGE('',*,*,#11529,.T.);+#13147 = ORIENTED_EDGE('',*,*,#11480,.T.);+#13148 = ORIENTED_EDGE('',*,*,#11404,.T.);+#13149 = FACE_BOUND('',#13150,.F.);+#13150 = EDGE_LOOP('',(#13151,#13183,#13213,#13243,#13273,#13303,#13333,+ #13363));+#13151 = ORIENTED_EDGE('',*,*,#13152,.T.);+#13152 = EDGE_CURVE('',#13153,#13155,#13157,.T.);+#13153 = VERTEX_POINT('',#13154);+#13154 = CARTESIAN_POINT('',(0.465980108352,-8.955659412203E-03,0.97));+#13155 = VERTEX_POINT('',#13156);+#13156 = CARTESIAN_POINT('',(0.504565662202,8.765113467262E-03,0.97));+#13157 = SURFACE_CURVE('',#13158,(#13162,#13169),.PCURVE_S1.);+#13158 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13159,#13160,#13161),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13159 = CARTESIAN_POINT('',(0.465980108352,-8.955659412203E-03,0.97));+#13160 = CARTESIAN_POINT('',(0.490560535249,-8.955659412203E-03,0.97));+#13161 = CARTESIAN_POINT('',(0.504565662202,8.765113467262E-03,0.97));+#13162 = PCURVE('',#11420,#13163);+#13163 = DEFINITIONAL_REPRESENTATION('',(#13164),#13168);+#13164 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13165,#13166,#13167),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13165 = CARTESIAN_POINT('',(0.113565383185,0.126141415551));+#13166 = CARTESIAN_POINT('',(0.138145810082,0.126141415551));+#13167 = CARTESIAN_POINT('',(0.152150937035,0.14386218843));+#13168 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13169 = PCURVE('',#13170,#13177);+#13170 = SURFACE_OF_LINEAR_EXTRUSION('',#13171,#13175);+#13171 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13172,#13173,#13174),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13172 = CARTESIAN_POINT('',(0.465980108352,-8.955659412203E-03,1.07));+#13173 = CARTESIAN_POINT('',(0.490560535249,-8.955659412203E-03,1.07));+#13174 = CARTESIAN_POINT('',(0.504565662202,8.765113467262E-03,1.07));+#13175 = VECTOR('',#13176,1.);+#13176 = DIRECTION('',(0.,0.,1.));+#13177 = DEFINITIONAL_REPRESENTATION('',(#13178),#13182);+#13178 = LINE('',#13179,#13180);+#13179 = CARTESIAN_POINT('',(0.,-0.1));+#13180 = VECTOR('',#13181,1.);+#13181 = DIRECTION('',(1.,0.));+#13182 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13183 = ORIENTED_EDGE('',*,*,#13184,.T.);+#13184 = EDGE_CURVE('',#13155,#13185,#13187,.T.);+#13185 = VERTEX_POINT('',#13186);+#13186 = CARTESIAN_POINT('',(0.518570789156,5.773542131696E-02,0.97));+#13187 = SURFACE_CURVE('',#13188,(#13192,#13199),.PCURVE_S1.);+#13188 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13189,#13190,#13191),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13189 = CARTESIAN_POINT('',(0.504565662202,8.765113467262E-03,0.97));+#13190 = CARTESIAN_POINT('',(0.518570789156,2.648588634673E-02,0.97));+#13191 = CARTESIAN_POINT('',(0.518570789156,5.773542131696E-02,0.97));+#13192 = PCURVE('',#11420,#13193);+#13193 = DEFINITIONAL_REPRESENTATION('',(#13194),#13198);+#13194 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13195,#13196,#13197),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13195 = CARTESIAN_POINT('',(0.152150937035,0.14386218843));+#13196 = CARTESIAN_POINT('',(0.166156063988,0.16158296131));+#13197 = CARTESIAN_POINT('',(0.166156063988,0.19283249628));+#13198 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13199 = PCURVE('',#13200,#13207);+#13200 = SURFACE_OF_LINEAR_EXTRUSION('',#13201,#13205);+#13201 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13202,#13203,#13204),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13202 = CARTESIAN_POINT('',(0.504565662202,8.765113467262E-03,1.07));+#13203 = CARTESIAN_POINT('',(0.518570789156,2.648588634673E-02,1.07));+#13204 = CARTESIAN_POINT('',(0.518570789156,5.773542131696E-02,1.07));+#13205 = VECTOR('',#13206,1.);+#13206 = DIRECTION('',(0.,0.,1.));+#13207 = DEFINITIONAL_REPRESENTATION('',(#13208),#13212);+#13208 = LINE('',#13209,#13210);+#13209 = CARTESIAN_POINT('',(0.,-0.1));+#13210 = VECTOR('',#13211,1.);+#13211 = DIRECTION('',(1.,0.));+#13212 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13213 = ORIENTED_EDGE('',*,*,#13214,.T.);+#13214 = EDGE_CURVE('',#13185,#13215,#13217,.T.);+#13215 = VERTEX_POINT('',#13216);+#13216 = CARTESIAN_POINT('',(0.504565662202,0.106705729167,0.97));+#13217 = SURFACE_CURVE('',#13218,(#13222,#13229),.PCURVE_S1.);+#13218 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13219,#13220,#13221),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13219 = CARTESIAN_POINT('',(0.518570789156,5.773542131696E-02,0.97));+#13220 = CARTESIAN_POINT('',(0.518570789156,8.89849562872E-02,0.97));+#13221 = CARTESIAN_POINT('',(0.504565662202,0.106705729167,0.97));+#13222 = PCURVE('',#11420,#13223);+#13223 = DEFINITIONAL_REPRESENTATION('',(#13224),#13228);+#13224 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13225,#13226,#13227),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13225 = CARTESIAN_POINT('',(0.166156063988,0.19283249628));+#13226 = CARTESIAN_POINT('',(0.166156063988,0.22408203125));+#13227 = CARTESIAN_POINT('',(0.152150937035,0.241802804129));+#13228 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13229 = PCURVE('',#13230,#13237);+#13230 = SURFACE_OF_LINEAR_EXTRUSION('',#13231,#13235);+#13231 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13232,#13233,#13234),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13232 = CARTESIAN_POINT('',(0.518570789156,5.773542131696E-02,1.07));+#13233 = CARTESIAN_POINT('',(0.518570789156,8.89849562872E-02,1.07));+#13234 = CARTESIAN_POINT('',(0.504565662202,0.106705729167,1.07));+#13235 = VECTOR('',#13236,1.);+#13236 = DIRECTION('',(0.,0.,1.));+#13237 = DEFINITIONAL_REPRESENTATION('',(#13238),#13242);+#13238 = LINE('',#13239,#13240);+#13239 = CARTESIAN_POINT('',(0.,-0.1));+#13240 = VECTOR('',#13241,1.);+#13241 = DIRECTION('',(1.,0.));+#13242 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13243 = ORIENTED_EDGE('',*,*,#13244,.T.);+#13244 = EDGE_CURVE('',#13215,#13245,#13247,.T.);+#13245 = VERTEX_POINT('',#13246);+#13246 = CARTESIAN_POINT('',(0.465980108352,0.124426502046,0.97));+#13247 = SURFACE_CURVE('',#13248,(#13252,#13259),.PCURVE_S1.);+#13248 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13249,#13250,#13251),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13249 = CARTESIAN_POINT('',(0.504565662202,0.106705729167,0.97));+#13250 = CARTESIAN_POINT('',(0.490560535249,0.124426502046,0.97));+#13251 = CARTESIAN_POINT('',(0.465980108352,0.124426502046,0.97));+#13252 = PCURVE('',#11420,#13253);+#13253 = DEFINITIONAL_REPRESENTATION('',(#13254),#13258);+#13254 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13255,#13256,#13257),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13255 = CARTESIAN_POINT('',(0.152150937035,0.241802804129));+#13256 = CARTESIAN_POINT('',(0.138145810082,0.259523577009));+#13257 = CARTESIAN_POINT('',(0.113565383185,0.259523577009));+#13258 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13259 = PCURVE('',#13260,#13267);+#13260 = SURFACE_OF_LINEAR_EXTRUSION('',#13261,#13265);+#13261 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13262,#13263,#13264),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13262 = CARTESIAN_POINT('',(0.504565662202,0.106705729167,1.07));+#13263 = CARTESIAN_POINT('',(0.490560535249,0.124426502046,1.07));+#13264 = CARTESIAN_POINT('',(0.465980108352,0.124426502046,1.07));+#13265 = VECTOR('',#13266,1.);+#13266 = DIRECTION('',(0.,0.,1.));+#13267 = DEFINITIONAL_REPRESENTATION('',(#13268),#13272);+#13268 = LINE('',#13269,#13270);+#13269 = CARTESIAN_POINT('',(0.,-0.1));+#13270 = VECTOR('',#13271,1.);+#13271 = DIRECTION('',(1.,0.));+#13272 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13273 = ORIENTED_EDGE('',*,*,#13274,.T.);+#13274 = EDGE_CURVE('',#13245,#13275,#13277,.T.);+#13275 = VERTEX_POINT('',#13276);+#13276 = CARTESIAN_POINT('',(0.427489827474,0.107563185919,0.97));+#13277 = SURFACE_CURVE('',#13278,(#13282,#13289),.PCURVE_S1.);+#13278 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13279,#13280,#13281),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13279 = CARTESIAN_POINT('',(0.465980108352,0.124426502046,0.97));+#13280 = CARTESIAN_POINT('',(0.44044695173,0.124426502046,0.97));+#13281 = CARTESIAN_POINT('',(0.427489827474,0.107563185919,0.97));+#13282 = PCURVE('',#11420,#13283);+#13283 = DEFINITIONAL_REPRESENTATION('',(#13284),#13288);+#13284 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13285,#13286,#13287),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13285 = CARTESIAN_POINT('',(0.113565383185,0.259523577009));+#13286 = CARTESIAN_POINT('',(8.80322265625E-02,0.259523577009));+#13287 = CARTESIAN_POINT('',(7.507510230655E-02,0.242660260882));+#13288 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13289 = PCURVE('',#13290,#13297);+#13290 = SURFACE_OF_LINEAR_EXTRUSION('',#13291,#13295);+#13291 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13292,#13293,#13294),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13292 = CARTESIAN_POINT('',(0.465980108352,0.124426502046,1.07));+#13293 = CARTESIAN_POINT('',(0.44044695173,0.124426502046,1.07));+#13294 = CARTESIAN_POINT('',(0.427489827474,0.107563185919,1.07));+#13295 = VECTOR('',#13296,1.);+#13296 = DIRECTION('',(0.,0.,1.));+#13297 = DEFINITIONAL_REPRESENTATION('',(#13298),#13302);+#13298 = LINE('',#13299,#13300);+#13299 = CARTESIAN_POINT('',(0.,-0.1));+#13300 = VECTOR('',#13301,1.);+#13301 = DIRECTION('',(1.,0.));+#13302 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13303 = ORIENTED_EDGE('',*,*,#13304,.T.);+#13304 = EDGE_CURVE('',#13275,#13305,#13307,.T.);+#13305 = VERTEX_POINT('',#13306);+#13306 = CARTESIAN_POINT('',(0.414532703218,5.773542131696E-02,0.97));+#13307 = SURFACE_CURVE('',#13308,(#13312,#13319),.PCURVE_S1.);+#13308 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13309,#13310,#13311),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13309 = CARTESIAN_POINT('',(0.427489827474,0.107563185919,0.97));+#13310 = CARTESIAN_POINT('',(0.414532703218,9.069986979167E-02,0.97));+#13311 = CARTESIAN_POINT('',(0.414532703218,5.773542131696E-02,0.97));+#13312 = PCURVE('',#11420,#13313);+#13313 = DEFINITIONAL_REPRESENTATION('',(#13314),#13318);+#13314 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13315,#13316,#13317),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13315 = CARTESIAN_POINT('',(7.507510230655E-02,0.242660260882));+#13316 = CARTESIAN_POINT('',(6.21179780506E-02,0.225796944754));+#13317 = CARTESIAN_POINT('',(6.21179780506E-02,0.19283249628));+#13318 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13319 = PCURVE('',#13320,#13327);+#13320 = SURFACE_OF_LINEAR_EXTRUSION('',#13321,#13325);+#13321 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13322,#13323,#13324),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13322 = CARTESIAN_POINT('',(0.427489827474,0.107563185919,1.07));+#13323 = CARTESIAN_POINT('',(0.414532703218,9.069986979167E-02,1.07));+#13324 = CARTESIAN_POINT('',(0.414532703218,5.773542131696E-02,1.07));+#13325 = VECTOR('',#13326,1.);+#13326 = DIRECTION('',(0.,0.,1.));+#13327 = DEFINITIONAL_REPRESENTATION('',(#13328),#13332);+#13328 = LINE('',#13329,#13330);+#13329 = CARTESIAN_POINT('',(0.,-0.1));+#13330 = VECTOR('',#13331,1.);+#13331 = DIRECTION('',(1.,0.));+#13332 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13333 = ORIENTED_EDGE('',*,*,#13334,.T.);+#13334 = EDGE_CURVE('',#13305,#13335,#13337,.T.);+#13335 = VERTEX_POINT('',#13336);+#13336 = CARTESIAN_POINT('',(0.427394554501,7.812383742559E-03,0.97));+#13337 = SURFACE_CURVE('',#13338,(#13342,#13349),.PCURVE_S1.);+#13338 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13339,#13340,#13341),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13339 = CARTESIAN_POINT('',(0.414532703218,5.773542131696E-02,0.97));+#13340 = CARTESIAN_POINT('',(0.414532703218,2.458042689732E-02,0.97));+#13341 = CARTESIAN_POINT('',(0.427394554501,7.812383742559E-03,0.97));+#13342 = PCURVE('',#11420,#13343);+#13343 = DEFINITIONAL_REPRESENTATION('',(#13344),#13348);+#13344 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13345,#13346,#13347),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13345 = CARTESIAN_POINT('',(6.21179780506E-02,0.19283249628));+#13346 = CARTESIAN_POINT('',(6.21179780506E-02,0.15967750186));+#13347 = CARTESIAN_POINT('',(7.497982933408E-02,0.142909458705));+#13348 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13349 = PCURVE('',#13350,#13357);+#13350 = SURFACE_OF_LINEAR_EXTRUSION('',#13351,#13355);+#13351 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13352,#13353,#13354),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13352 = CARTESIAN_POINT('',(0.414532703218,5.773542131696E-02,1.07));+#13353 = CARTESIAN_POINT('',(0.414532703218,2.458042689732E-02,1.07));+#13354 = CARTESIAN_POINT('',(0.427394554501,7.812383742559E-03,1.07));+#13355 = VECTOR('',#13356,1.);+#13356 = DIRECTION('',(0.,0.,1.));+#13357 = DEFINITIONAL_REPRESENTATION('',(#13358),#13362);+#13358 = LINE('',#13359,#13360);+#13359 = CARTESIAN_POINT('',(0.,-0.1));+#13360 = VECTOR('',#13361,1.);+#13361 = DIRECTION('',(1.,0.));+#13362 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13363 = ORIENTED_EDGE('',*,*,#13364,.T.);+#13364 = EDGE_CURVE('',#13335,#13153,#13365,.T.);+#13365 = SURFACE_CURVE('',#13366,(#13370,#13377),.PCURVE_S1.);+#13366 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13367,#13368,#13369),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13367 = CARTESIAN_POINT('',(0.427394554501,7.812383742559E-03,0.97));+#13368 = CARTESIAN_POINT('',(0.440256405785,-8.955659412203E-03,0.97));+#13369 = CARTESIAN_POINT('',(0.465980108352,-8.955659412203E-03,0.97));+#13370 = PCURVE('',#11420,#13371);+#13371 = DEFINITIONAL_REPRESENTATION('',(#13372),#13376);+#13372 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13373,#13374,#13375),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13373 = CARTESIAN_POINT('',(7.497982933408E-02,0.142909458705));+#13374 = CARTESIAN_POINT('',(8.784168061756E-02,0.126141415551));+#13375 = CARTESIAN_POINT('',(0.113565383185,0.126141415551));+#13376 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13377 = PCURVE('',#13378,#13385);+#13378 = SURFACE_OF_LINEAR_EXTRUSION('',#13379,#13383);+#13379 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13380,#13381,#13382),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13380 = CARTESIAN_POINT('',(0.427394554501,7.812383742559E-03,1.07));+#13381 = CARTESIAN_POINT('',(0.440256405785,-8.955659412203E-03,1.07));+#13382 = CARTESIAN_POINT('',(0.465980108352,-8.955659412203E-03,1.07));+#13383 = VECTOR('',#13384,1.);+#13384 = DIRECTION('',(0.,0.,1.));+#13385 = DEFINITIONAL_REPRESENTATION('',(#13386),#13390);+#13386 = LINE('',#13387,#13388);+#13387 = CARTESIAN_POINT('',(0.,-0.1));+#13388 = VECTOR('',#13389,1.);+#13389 = DIRECTION('',(1.,0.));+#13390 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13391 = ADVANCED_FACE('',(#13392),#12258,.T.);+#13392 = FACE_BOUND('',#13393,.F.);+#13393 = EDGE_LOOP('',(#13394,#13395,#13396,#13397,#13398,#13399,#13400,+ #13401,#13402,#13403,#13404));+#13394 = ORIENTED_EDGE('',*,*,#12737,.T.);+#13395 = ORIENTED_EDGE('',*,*,#12710,.T.);+#13396 = ORIENTED_EDGE('',*,*,#12661,.T.);+#13397 = ORIENTED_EDGE('',*,*,#12612,.T.);+#13398 = ORIENTED_EDGE('',*,*,#12563,.T.);+#13399 = ORIENTED_EDGE('',*,*,#12514,.T.);+#13400 = ORIENTED_EDGE('',*,*,#12465,.T.);+#13401 = ORIENTED_EDGE('',*,*,#12416,.T.);+#13402 = ORIENTED_EDGE('',*,*,#12367,.T.);+#13403 = ORIENTED_EDGE('',*,*,#12318,.T.);+#13404 = ORIENTED_EDGE('',*,*,#12242,.T.);+#13405 = ADVANCED_FACE('',(#13406),#12806,.T.);+#13406 = FACE_BOUND('',#13407,.T.);+#13407 = EDGE_LOOP('',(#13408,#13436,#13457,#13458));+#13408 = ORIENTED_EDGE('',*,*,#13409,.F.);+#13409 = EDGE_CURVE('',#13410,#13412,#13414,.T.);+#13410 = VERTEX_POINT('',#13411);+#13411 = CARTESIAN_POINT('',(-0.466742292132,0.117757393973,1.02));+#13412 = VERTEX_POINT('',#13413);+#13413 = CARTESIAN_POINT('',(-0.511330043248,0.117757393973,1.02));+#13414 = SURFACE_CURVE('',#13415,(#13419,#13425),.PCURVE_S1.);+#13415 = LINE('',#13416,#13417);+#13416 = CARTESIAN_POINT('',(-0.978371146066,0.117757393973,1.02));+#13417 = VECTOR('',#13418,1.);+#13418 = DIRECTION('',(-1.,0.,0.));+#13419 = PCURVE('',#12806,#13420);+#13420 = DEFINITIONAL_REPRESENTATION('',(#13421),#13424);+#13421 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13422,#13423),.UNSPECIFIED.,+ .F.,.F.,(2,2),(-0.511628853934,-0.467041102818),+ .PIECEWISE_BEZIER_KNOTS.);+#13422 = CARTESIAN_POINT('',(0.,-5.E-02));+#13423 = CARTESIAN_POINT('',(4.458775111607E-02,-5.E-02));+#13424 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13425 = PCURVE('',#13426,#13431);+#13426 = PLANE('',#13427);+#13427 = AXIS2_PLACEMENT_3D('',#13428,#13429,#13430);+#13428 = CARTESIAN_POINT('',(-1.49,1.49,1.02));+#13429 = DIRECTION('',(0.,0.,1.));+#13430 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#13431 = DEFINITIONAL_REPRESENTATION('',(#13432),#13435);+#13432 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13433,#13434),.UNSPECIFIED.,+ .F.,.F.,(2,2),(-0.511628853934,-0.467041102818),+ .PIECEWISE_BEZIER_KNOTS.);+#13433 = CARTESIAN_POINT('',(1.372242606027,1.023257707868));+#13434 = CARTESIAN_POINT('',(1.372242606027,0.978669956752));+#13435 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13436 = ORIENTED_EDGE('',*,*,#13437,.T.);+#13437 = EDGE_CURVE('',#13410,#12789,#13438,.T.);+#13438 = SURFACE_CURVE('',#13439,(#13443,#13450),.PCURVE_S1.);+#13439 = LINE('',#13440,#13441);+#13440 = CARTESIAN_POINT('',(-0.466742292132,0.117757393973,1.07));+#13441 = VECTOR('',#13442,1.);+#13442 = DIRECTION('',(-0.,-0.,-1.));+#13443 = PCURVE('',#12806,#13444);+#13444 = DEFINITIONAL_REPRESENTATION('',(#13445),#13449);+#13445 = LINE('',#13446,#13447);+#13446 = CARTESIAN_POINT('',(0.,0.));+#13447 = VECTOR('',#13448,1.);+#13448 = DIRECTION('',(0.,-1.));+#13449 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13450 = PCURVE('',#12978,#13451);+#13451 = DEFINITIONAL_REPRESENTATION('',(#13452),#13456);+#13452 = LINE('',#13453,#13454);+#13453 = CARTESIAN_POINT('',(1.,0.));+#13454 = VECTOR('',#13455,1.);+#13455 = DIRECTION('',(0.,-1.));+#13456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13457 = ORIENTED_EDGE('',*,*,#12788,.T.);+#13458 = ORIENTED_EDGE('',*,*,#13459,.F.);+#13459 = EDGE_CURVE('',#13412,#12791,#13460,.T.);+#13460 = SURFACE_CURVE('',#13461,(#13465,#13472),.PCURVE_S1.);+#13461 = LINE('',#13462,#13463);+#13462 = CARTESIAN_POINT('',(-0.511330043248,0.117757393973,1.07));+#13463 = VECTOR('',#13464,1.);+#13464 = DIRECTION('',(-0.,-0.,-1.));+#13465 = PCURVE('',#12806,#13466);+#13466 = DEFINITIONAL_REPRESENTATION('',(#13467),#13471);+#13467 = LINE('',#13468,#13469);+#13468 = CARTESIAN_POINT('',(4.458775111607E-02,0.));+#13469 = VECTOR('',#13470,1.);+#13470 = DIRECTION('',(0.,-1.));+#13471 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13472 = PCURVE('',#12834,#13473);+#13473 = DEFINITIONAL_REPRESENTATION('',(#13474),#13478);+#13474 = LINE('',#13475,#13476);+#13475 = CARTESIAN_POINT('',(0.,0.));+#13476 = VECTOR('',#13477,1.);+#13477 = DIRECTION('',(0.,-1.));+#13478 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13479 = ADVANCED_FACE('',(#13480),#12834,.T.);+#13480 = FACE_BOUND('',#13481,.T.);+#13481 = EDGE_LOOP('',(#13482,#13503,#13504,#13505));+#13482 = ORIENTED_EDGE('',*,*,#13483,.F.);+#13483 = EDGE_CURVE('',#13412,#13484,#13486,.T.);+#13484 = VERTEX_POINT('',#13485);+#13485 = CARTESIAN_POINT('',(-0.511330043248,1.086111886161E-02,1.02));+#13486 = SURFACE_CURVE('',#13487,(#13491,#13497),.PCURVE_S1.);+#13487 = LINE('',#13488,#13489);+#13488 = CARTESIAN_POINT('',(-0.511330043248,0.803878696987,1.02));+#13489 = VECTOR('',#13490,1.);+#13490 = DIRECTION('',(0.,-1.,0.));+#13491 = PCURVE('',#12834,#13492);+#13492 = DEFINITIONAL_REPRESENTATION('',(#13493),#13496);+#13493 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13494,#13495),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.686121303013,0.793017578125),+ .PIECEWISE_BEZIER_KNOTS.);+#13494 = CARTESIAN_POINT('',(0.,-5.E-02));+#13495 = CARTESIAN_POINT('',(0.106896275112,-5.E-02));+#13496 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13497 = PCURVE('',#13426,#13498);+#13498 = DEFINITIONAL_REPRESENTATION('',(#13499),#13502);+#13499 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13500,#13501),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.686121303013,0.793017578125),+ .PIECEWISE_BEZIER_KNOTS.);+#13500 = CARTESIAN_POINT('',(1.372242606027,0.978669956752));+#13501 = CARTESIAN_POINT('',(1.479138881138,0.978669956752));+#13502 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13503 = ORIENTED_EDGE('',*,*,#13459,.T.);+#13504 = ORIENTED_EDGE('',*,*,#12818,.T.);+#13505 = ORIENTED_EDGE('',*,*,#13506,.F.);+#13506 = EDGE_CURVE('',#13484,#12819,#13507,.T.);+#13507 = SURFACE_CURVE('',#13508,(#13512,#13519),.PCURVE_S1.);+#13508 = LINE('',#13509,#13510);+#13509 = CARTESIAN_POINT('',(-0.511330043248,1.086111886161E-02,1.07));+#13510 = VECTOR('',#13511,1.);+#13511 = DIRECTION('',(-0.,-0.,-1.));+#13512 = PCURVE('',#12834,#13513);+#13513 = DEFINITIONAL_REPRESENTATION('',(#13514),#13518);+#13514 = LINE('',#13515,#13516);+#13515 = CARTESIAN_POINT('',(0.106896275112,0.));+#13516 = VECTOR('',#13517,1.);+#13517 = DIRECTION('',(0.,-1.));+#13518 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13519 = PCURVE('',#12862,#13520);+#13520 = DEFINITIONAL_REPRESENTATION('',(#13521),#13525);+#13521 = LINE('',#13522,#13523);+#13522 = CARTESIAN_POINT('',(0.,0.));+#13523 = VECTOR('',#13524,1.);+#13524 = DIRECTION('',(0.,-1.));+#13525 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13526 = ADVANCED_FACE('',(#13527),#12862,.T.);+#13527 = FACE_BOUND('',#13528,.T.);+#13528 = EDGE_LOOP('',(#13529,#13550,#13551,#13552));+#13529 = ORIENTED_EDGE('',*,*,#13530,.F.);+#13530 = EDGE_CURVE('',#13484,#13531,#13533,.T.);+#13531 = VERTEX_POINT('',#13532);+#13532 = CARTESIAN_POINT('',(-0.466742292132,1.086111886161E-02,1.02));+#13533 = SURFACE_CURVE('',#13534,(#13538,#13544),.PCURVE_S1.);+#13534 = LINE('',#13535,#13536);+#13535 = CARTESIAN_POINT('',(-1.000665021624,1.086111886161E-02,1.02));+#13536 = VECTOR('',#13537,1.);+#13537 = DIRECTION('',(1.,0.,-0.));+#13538 = PCURVE('',#12862,#13539);+#13539 = DEFINITIONAL_REPRESENTATION('',(#13540),#13543);+#13540 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13541,#13542),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.489334978376,0.533922729492),+ .PIECEWISE_BEZIER_KNOTS.);+#13541 = CARTESIAN_POINT('',(0.,-5.E-02));+#13542 = CARTESIAN_POINT('',(4.458775111607E-02,-5.E-02));+#13543 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13544 = PCURVE('',#13426,#13545);+#13545 = DEFINITIONAL_REPRESENTATION('',(#13546),#13549);+#13546 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13547,#13548),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.489334978376,0.533922729492),+ .PIECEWISE_BEZIER_KNOTS.);+#13547 = CARTESIAN_POINT('',(1.479138881138,0.978669956752));+#13548 = CARTESIAN_POINT('',(1.479138881138,1.023257707868));+#13549 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13550 = ORIENTED_EDGE('',*,*,#13506,.T.);+#13551 = ORIENTED_EDGE('',*,*,#12846,.T.);+#13552 = ORIENTED_EDGE('',*,*,#13553,.F.);+#13553 = EDGE_CURVE('',#13531,#12847,#13554,.T.);+#13554 = SURFACE_CURVE('',#13555,(#13559,#13566),.PCURVE_S1.);+#13555 = LINE('',#13556,#13557);+#13556 = CARTESIAN_POINT('',(-0.466742292132,1.086111886161E-02,1.07));+#13557 = VECTOR('',#13558,1.);+#13558 = DIRECTION('',(-0.,-0.,-1.));+#13559 = PCURVE('',#12862,#13560);+#13560 = DEFINITIONAL_REPRESENTATION('',(#13561),#13565);+#13561 = LINE('',#13562,#13563);+#13562 = CARTESIAN_POINT('',(4.458775111607E-02,0.));+#13563 = VECTOR('',#13564,1.);+#13564 = DIRECTION('',(0.,-1.));+#13565 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13566 = PCURVE('',#12890,#13567);+#13567 = DEFINITIONAL_REPRESENTATION('',(#13568),#13572);+#13568 = LINE('',#13569,#13570);+#13569 = CARTESIAN_POINT('',(0.,0.));+#13570 = VECTOR('',#13571,1.);+#13571 = DIRECTION('',(0.,-1.));+#13572 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13573 = ADVANCED_FACE('',(#13574),#12890,.T.);+#13574 = FACE_BOUND('',#13575,.T.);+#13575 = EDGE_LOOP('',(#13576,#13605,#13606,#13607));+#13576 = ORIENTED_EDGE('',*,*,#13577,.T.);+#13577 = EDGE_CURVE('',#13578,#13531,#13580,.T.);+#13578 = VERTEX_POINT('',#13579);+#13579 = CARTESIAN_POINT('',(-0.425108003162,2.49615187872E-02,1.02));+#13580 = SURFACE_CURVE('',#13581,(#13587,#13596),.PCURVE_S1.);+#13581 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13582,#13583,#13584,#13585,+ #13586),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13582 = CARTESIAN_POINT('',(-0.425108003162,2.49615187872E-02,1.02));+#13583 = CARTESIAN_POINT('',(-0.432588252868,1.791007320464E-02,1.02));+#13584 = CARTESIAN_POINT('',(-0.442022524725,1.32093042247E-02,1.02));+#13585 = CARTESIAN_POINT('',(-0.453409412543,1.086111886161E-02,1.02));+#13586 = CARTESIAN_POINT('',(-0.466742292132,1.086111886161E-02,1.02));+#13587 = PCURVE('',#12890,#13588);+#13588 = DEFINITIONAL_REPRESENTATION('',(#13589),#13595);+#13589 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13590,#13591,#13592,#13593,+ #13594),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13590 = CARTESIAN_POINT('',(1.,-5.E-02));+#13591 = CARTESIAN_POINT('',(0.749955830339,-5.E-02));+#13592 = CARTESIAN_POINT('',(0.499903801697,-5.E-02));+#13593 = CARTESIAN_POINT('',(0.249899976189,-5.E-02));+#13594 = CARTESIAN_POINT('',(0.,-5.E-02));+#13595 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13596 = PCURVE('',#13426,#13597);+#13597 = DEFINITIONAL_REPRESENTATION('',(#13598),#13604);+#13598 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13599,#13600,#13601,#13602,+ #13603),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13599 = CARTESIAN_POINT('',(1.465038481213,1.064891996838));+#13600 = CARTESIAN_POINT('',(1.472089926795,1.057411747132));+#13601 = CARTESIAN_POINT('',(1.476790695775,1.047977475275));+#13602 = CARTESIAN_POINT('',(1.479138881138,1.036590587457));+#13603 = CARTESIAN_POINT('',(1.479138881138,1.023257707868));+#13604 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13605 = ORIENTED_EDGE('',*,*,#13553,.T.);+#13606 = ORIENTED_EDGE('',*,*,#12874,.T.);+#13607 = ORIENTED_EDGE('',*,*,#13608,.F.);+#13608 = EDGE_CURVE('',#13578,#12875,#13609,.T.);+#13609 = SURFACE_CURVE('',#13610,(#13614,#13621),.PCURVE_S1.);+#13610 = LINE('',#13611,#13612);+#13611 = CARTESIAN_POINT('',(-0.425108003162,2.49615187872E-02,1.07));+#13612 = VECTOR('',#13613,1.);+#13613 = DIRECTION('',(-0.,-0.,-1.));+#13614 = PCURVE('',#12890,#13615);+#13615 = DEFINITIONAL_REPRESENTATION('',(#13616),#13620);+#13616 = LINE('',#13617,#13618);+#13617 = CARTESIAN_POINT('',(1.,0.));+#13618 = VECTOR('',#13619,1.);+#13619 = DIRECTION('',(0.,-1.));+#13620 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13621 = PCURVE('',#12920,#13622);+#13622 = DEFINITIONAL_REPRESENTATION('',(#13623),#13627);+#13623 = LINE('',#13624,#13625);+#13624 = CARTESIAN_POINT('',(0.,0.));+#13625 = VECTOR('',#13626,1.);+#13626 = DIRECTION('',(0.,-1.));+#13627 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13628 = ADVANCED_FACE('',(#13629),#12920,.T.);+#13629 = FACE_BOUND('',#13630,.T.);+#13630 = EDGE_LOOP('',(#13631,#13660,#13661,#13662));+#13631 = ORIENTED_EDGE('',*,*,#13632,.T.);+#13632 = EDGE_CURVE('',#13633,#13578,#13635,.T.);+#13633 = VERTEX_POINT('',#13634);+#13634 = CARTESIAN_POINT('',(-0.410150146484,6.440452938988E-02,1.02));+#13635 = SURFACE_CURVE('',#13636,(#13642,#13651),.PCURVE_S1.);+#13636 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13637,#13638,#13639,#13640,+ #13641),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13637 = CARTESIAN_POINT('',(-0.410150146484,6.440452938988E-02,1.02));+#13638 = CARTESIAN_POINT('',(-0.410150146484,5.173747678282E-02,1.02));+#13639 = CARTESIAN_POINT('',(-0.41264144851,4.093806838584E-02,1.02));+#13640 = CARTESIAN_POINT('',(-0.417628306175,3.201244333604E-02,1.02));+#13641 = CARTESIAN_POINT('',(-0.425108003162,2.49615187872E-02,1.02));+#13642 = PCURVE('',#12920,#13643);+#13643 = DEFINITIONAL_REPRESENTATION('',(#13644),#13650);+#13644 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13645,#13646,#13647,#13648,+ #13649),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13645 = CARTESIAN_POINT('',(1.,-5.E-02));+#13646 = CARTESIAN_POINT('',(0.750083904763,-5.E-02));+#13647 = CARTESIAN_POINT('',(0.500073120181,-5.E-02));+#13648 = CARTESIAN_POINT('',(0.250025693812,-5.E-02));+#13649 = CARTESIAN_POINT('',(0.,-5.E-02));+#13650 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13651 = PCURVE('',#13426,#13652);+#13652 = DEFINITIONAL_REPRESENTATION('',(#13653),#13659);+#13653 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13654,#13655,#13656,#13657,+ #13658),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13654 = CARTESIAN_POINT('',(1.42559547061,1.079849853516));+#13655 = CARTESIAN_POINT('',(1.438262523217,1.079849853516));+#13656 = CARTESIAN_POINT('',(1.449061931614,1.07735855149));+#13657 = CARTESIAN_POINT('',(1.457987556664,1.072371693825));+#13658 = CARTESIAN_POINT('',(1.465038481213,1.064891996838));+#13659 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13660 = ORIENTED_EDGE('',*,*,#13608,.T.);+#13661 = ORIENTED_EDGE('',*,*,#12904,.T.);+#13662 = ORIENTED_EDGE('',*,*,#13663,.F.);+#13663 = EDGE_CURVE('',#13633,#12905,#13664,.T.);+#13664 = SURFACE_CURVE('',#13665,(#13669,#13676),.PCURVE_S1.);+#13665 = LINE('',#13666,#13667);+#13666 = CARTESIAN_POINT('',(-0.410150146484,6.440452938988E-02,1.07));+#13667 = VECTOR('',#13668,1.);+#13668 = DIRECTION('',(-0.,-0.,-1.));+#13669 = PCURVE('',#12920,#13670);+#13670 = DEFINITIONAL_REPRESENTATION('',(#13671),#13675);+#13671 = LINE('',#13672,#13673);+#13672 = CARTESIAN_POINT('',(1.,0.));+#13673 = VECTOR('',#13674,1.);+#13674 = DIRECTION('',(0.,-1.));+#13675 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13676 = PCURVE('',#12950,#13677);+#13677 = DEFINITIONAL_REPRESENTATION('',(#13678),#13682);+#13678 = LINE('',#13679,#13680);+#13679 = CARTESIAN_POINT('',(0.,0.));+#13680 = VECTOR('',#13681,1.);+#13681 = DIRECTION('',(0.,-1.));+#13682 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13683 = ADVANCED_FACE('',(#13684),#12950,.T.);+#13684 = FACE_BOUND('',#13685,.T.);+#13685 = EDGE_LOOP('',(#13686,#13715,#13716,#13717));+#13686 = ORIENTED_EDGE('',*,*,#13687,.T.);+#13687 = EDGE_CURVE('',#13688,#13633,#13690,.T.);+#13688 = VERTEX_POINT('',#13689);+#13689 = CARTESIAN_POINT('',(-0.42501273019,0.10375226702,1.02));+#13690 = SURFACE_CURVE('',#13691,(#13697,#13706),.PCURVE_S1.);+#13691 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13692,#13693,#13694,#13695,+ #13696),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13692 = CARTESIAN_POINT('',(-0.42501273019,0.10375226702,1.02));+#13693 = CARTESIAN_POINT('',(-0.417580631925,9.674894365488E-02,1.02));+#13694 = CARTESIAN_POINT('',(-0.412625554185,8.785504904447E-02,1.02));+#13695 = CARTESIAN_POINT('',(-0.410150146484,7.707151512432E-02,1.02));+#13696 = CARTESIAN_POINT('',(-0.410150146484,6.440452938988E-02,1.02));+#13697 = PCURVE('',#12950,#13698);+#13698 = DEFINITIONAL_REPRESENTATION('',(#13699),#13705);+#13699 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13700,#13701,#13702,#13703,+ #13704),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13700 = CARTESIAN_POINT('',(1.,-5.E-02));+#13701 = CARTESIAN_POINT('',(0.749972871055,-5.E-02));+#13702 = CARTESIAN_POINT('',(0.499925042243,-5.E-02));+#13703 = CARTESIAN_POINT('',(0.249914775866,-5.E-02));+#13704 = CARTESIAN_POINT('',(0.,-5.E-02));+#13705 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13706 = PCURVE('',#13426,#13707);+#13707 = DEFINITIONAL_REPRESENTATION('',(#13708),#13714);+#13708 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13709,#13710,#13711,#13712,+ #13713),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13709 = CARTESIAN_POINT('',(1.38624773298,1.06498726981));+#13710 = CARTESIAN_POINT('',(1.393251056345,1.072419368075));+#13711 = CARTESIAN_POINT('',(1.402144950956,1.077374445815));+#13712 = CARTESIAN_POINT('',(1.412928484876,1.079849853516));+#13713 = CARTESIAN_POINT('',(1.42559547061,1.079849853516));+#13714 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13715 = ORIENTED_EDGE('',*,*,#13663,.T.);+#13716 = ORIENTED_EDGE('',*,*,#12934,.T.);+#13717 = ORIENTED_EDGE('',*,*,#13718,.F.);+#13718 = EDGE_CURVE('',#13688,#12935,#13719,.T.);+#13719 = SURFACE_CURVE('',#13720,(#13724,#13731),.PCURVE_S1.);+#13720 = LINE('',#13721,#13722);+#13721 = CARTESIAN_POINT('',(-0.42501273019,0.10375226702,1.07));+#13722 = VECTOR('',#13723,1.);+#13723 = DIRECTION('',(-0.,-0.,-1.));+#13724 = PCURVE('',#12950,#13725);+#13725 = DEFINITIONAL_REPRESENTATION('',(#13726),#13730);+#13726 = LINE('',#13727,#13728);+#13727 = CARTESIAN_POINT('',(1.,0.));+#13728 = VECTOR('',#13729,1.);+#13729 = DIRECTION('',(0.,-1.));+#13730 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13731 = PCURVE('',#12978,#13732);+#13732 = DEFINITIONAL_REPRESENTATION('',(#13733),#13737);+#13733 = LINE('',#13734,#13735);+#13734 = CARTESIAN_POINT('',(0.,0.));+#13735 = VECTOR('',#13736,1.);+#13736 = DIRECTION('',(0.,-1.));+#13737 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13738 = ADVANCED_FACE('',(#13739),#12978,.T.);+#13739 = FACE_BOUND('',#13740,.T.);+#13740 = EDGE_LOOP('',(#13741,#13768,#13769,#13770));+#13741 = ORIENTED_EDGE('',*,*,#13742,.T.);+#13742 = EDGE_CURVE('',#13410,#13688,#13743,.T.);+#13743 = SURFACE_CURVE('',#13744,(#13750,#13759),.PCURVE_S1.);+#13744 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13745,#13746,#13747,#13748,+ #13749),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13745 = CARTESIAN_POINT('',(-0.466742292132,0.117757393973,1.02));+#13746 = CARTESIAN_POINT('',(-0.453314406492,0.117757393973,1.02));+#13747 = CARTESIAN_POINT('',(-0.441879826713,0.115425154285,1.02));+#13748 = CARTESIAN_POINT('',(-0.432445441476,0.11075616804,1.02));+#13749 = CARTESIAN_POINT('',(-0.42501273019,0.10375226702,1.02));+#13750 = PCURVE('',#12978,#13751);+#13751 = DEFINITIONAL_REPRESENTATION('',(#13752),#13758);+#13752 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13753,#13754,#13755,#13756,+ #13757),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13753 = CARTESIAN_POINT('',(1.,-5.E-02));+#13754 = CARTESIAN_POINT('',(0.750104281893,-5.E-02));+#13755 = CARTESIAN_POINT('',(0.500101429874,-5.E-02));+#13756 = CARTESIAN_POINT('',(0.250047751926,-5.E-02));+#13757 = CARTESIAN_POINT('',(0.,-5.E-02));+#13758 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13759 = PCURVE('',#13426,#13760);+#13760 = DEFINITIONAL_REPRESENTATION('',(#13761),#13767);+#13761 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13762,#13763,#13764,#13765,+ #13766),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13762 = CARTESIAN_POINT('',(1.372242606027,1.023257707868));+#13763 = CARTESIAN_POINT('',(1.372242606027,1.036685593508));+#13764 = CARTESIAN_POINT('',(1.374574845715,1.048120173287));+#13765 = CARTESIAN_POINT('',(1.37924383196,1.057554558524));+#13766 = CARTESIAN_POINT('',(1.38624773298,1.06498726981));+#13767 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13768 = ORIENTED_EDGE('',*,*,#13718,.T.);+#13769 = ORIENTED_EDGE('',*,*,#12964,.T.);+#13770 = ORIENTED_EDGE('',*,*,#13437,.F.);+#13771 = ADVANCED_FACE('',(#13772),#13064,.T.);+#13772 = FACE_BOUND('',#13773,.T.);+#13773 = EDGE_LOOP('',(#13774,#13802,#13823,#13824));+#13774 = ORIENTED_EDGE('',*,*,#13775,.F.);+#13775 = EDGE_CURVE('',#13776,#13778,#13780,.T.);+#13776 = VERTEX_POINT('',#13777);+#13777 = CARTESIAN_POINT('',(0.275434163411,-3.01062593006E-02,1.02));+#13778 = VERTEX_POINT('',#13779);+#13779 = CARTESIAN_POINT('',(0.234847877139,0.115470842634,1.02));+#13780 = SURFACE_CURVE('',#13781,(#13785,#13791),.PCURVE_S1.);+#13781 = LINE('',#13782,#13783);+#13782 = CARTESIAN_POINT('',(1.515429221506E-02,0.903479757573,1.02));+#13783 = VECTOR('',#13784,1.);+#13784 = DIRECTION('',(-0.268554134051,0.963264593497,0.));+#13785 = PCURVE('',#13064,#13786);+#13786 = DEFINITIONAL_REPRESENTATION('',(#13787),#13790);+#13787 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13788,#13789),.UNSPECIFIED.,+ .F.,.F.,(2,2),(-0.969189590458,-0.818060707576),+ .PIECEWISE_BEZIER_KNOTS.);+#13788 = CARTESIAN_POINT('',(0.,-5.E-02));+#13789 = CARTESIAN_POINT('',(0.151128882882,-5.E-02));+#13790 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13791 = PCURVE('',#13792,#13797);+#13792 = PLANE('',#13793);+#13793 = AXIS2_PLACEMENT_3D('',#13794,#13795,#13796);+#13794 = CARTESIAN_POINT('',(-1.49,1.49,1.02));+#13795 = DIRECTION('',(0.,0.,1.));+#13796 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#13797 = DEFINITIONAL_REPRESENTATION('',(#13798),#13801);+#13798 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13799,#13800),.UNSPECIFIED.,+ .F.,.F.,(2,2),(-0.969189590458,-0.818060707576),+ .PIECEWISE_BEZIER_KNOTS.);+#13799 = CARTESIAN_POINT('',(1.520106259301,1.765434163411));+#13800 = CARTESIAN_POINT('',(1.374529157366,1.724847877139));+#13801 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13802 = ORIENTED_EDGE('',*,*,#13803,.T.);+#13803 = EDGE_CURVE('',#13776,#13047,#13804,.T.);+#13804 = SURFACE_CURVE('',#13805,(#13809,#13816),.PCURVE_S1.);+#13805 = LINE('',#13806,#13807);+#13806 = CARTESIAN_POINT('',(0.275434163411,-3.01062593006E-02,1.07));+#13807 = VECTOR('',#13808,1.);+#13808 = DIRECTION('',(-0.,-0.,-1.));+#13809 = PCURVE('',#13064,#13810);+#13810 = DEFINITIONAL_REPRESENTATION('',(#13811),#13815);+#13811 = LINE('',#13812,#13813);+#13812 = CARTESIAN_POINT('',(0.,0.));+#13813 = VECTOR('',#13814,1.);+#13814 = DIRECTION('',(0.,-1.));+#13815 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13816 = PCURVE('',#13118,#13817);+#13817 = DEFINITIONAL_REPRESENTATION('',(#13818),#13822);+#13818 = LINE('',#13819,#13820);+#13819 = CARTESIAN_POINT('',(8.117257254464E-02,0.));+#13820 = VECTOR('',#13821,1.);+#13821 = DIRECTION('',(0.,-1.));+#13822 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13823 = ORIENTED_EDGE('',*,*,#13046,.T.);+#13824 = ORIENTED_EDGE('',*,*,#13825,.F.);+#13825 = EDGE_CURVE('',#13778,#13049,#13826,.T.);+#13826 = SURFACE_CURVE('',#13827,(#13831,#13838),.PCURVE_S1.);+#13827 = LINE('',#13828,#13829);+#13828 = CARTESIAN_POINT('',(0.234847877139,0.115470842634,1.07));+#13829 = VECTOR('',#13830,1.);+#13830 = DIRECTION('',(-0.,-0.,-1.));+#13831 = PCURVE('',#13064,#13832);+#13832 = DEFINITIONAL_REPRESENTATION('',(#13833),#13837);+#13833 = LINE('',#13834,#13835);+#13834 = CARTESIAN_POINT('',(0.151128882882,0.));+#13835 = VECTOR('',#13836,1.);+#13836 = DIRECTION('',(0.,-1.));+#13837 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13838 = PCURVE('',#13092,#13839);+#13839 = DEFINITIONAL_REPRESENTATION('',(#13840),#13844);+#13840 = LINE('',#13841,#13842);+#13841 = CARTESIAN_POINT('',(0.,0.));+#13842 = VECTOR('',#13843,1.);+#13843 = DIRECTION('',(0.,-1.));+#13844 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13845 = ADVANCED_FACE('',(#13846),#13092,.T.);+#13846 = FACE_BOUND('',#13847,.T.);+#13847 = EDGE_LOOP('',(#13848,#13869,#13870,#13871));+#13848 = ORIENTED_EDGE('',*,*,#13849,.F.);+#13849 = EDGE_CURVE('',#13778,#13850,#13852,.T.);+#13850 = VERTEX_POINT('',#13851);+#13851 = CARTESIAN_POINT('',(0.194261590867,-3.01062593006E-02,1.02));+#13852 = SURFACE_CURVE('',#13853,(#13857,#13863),.PCURVE_S1.);+#13853 = LINE('',#13854,#13855);+#13854 = CARTESIAN_POINT('',(0.350436294472,0.530069672878,1.02));+#13855 = VECTOR('',#13856,1.);+#13856 = DIRECTION('',(-0.268554134051,-0.963264593497,0.));+#13857 = PCURVE('',#13092,#13858);+#13858 = DEFINITIONAL_REPRESENTATION('',(#13859),#13862);+#13859 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13860,#13861),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.430410121003,0.581539003884),+ .PIECEWISE_BEZIER_KNOTS.);+#13860 = CARTESIAN_POINT('',(0.,-5.E-02));+#13861 = CARTESIAN_POINT('',(0.151128882882,-5.E-02));+#13862 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13863 = PCURVE('',#13792,#13864);+#13864 = DEFINITIONAL_REPRESENTATION('',(#13865),#13868);+#13865 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13866,#13867),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.430410121003,0.581539003884),+ .PIECEWISE_BEZIER_KNOTS.);+#13866 = CARTESIAN_POINT('',(1.374529157366,1.724847877139));+#13867 = CARTESIAN_POINT('',(1.520106259301,1.684261590867));+#13868 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13869 = ORIENTED_EDGE('',*,*,#13825,.T.);+#13870 = ORIENTED_EDGE('',*,*,#13076,.T.);+#13871 = ORIENTED_EDGE('',*,*,#13872,.F.);+#13872 = EDGE_CURVE('',#13850,#13077,#13873,.T.);+#13873 = SURFACE_CURVE('',#13874,(#13878,#13885),.PCURVE_S1.);+#13874 = LINE('',#13875,#13876);+#13875 = CARTESIAN_POINT('',(0.194261590867,-3.01062593006E-02,1.07));+#13876 = VECTOR('',#13877,1.);+#13877 = DIRECTION('',(-0.,-0.,-1.));+#13878 = PCURVE('',#13092,#13879);+#13879 = DEFINITIONAL_REPRESENTATION('',(#13880),#13884);+#13880 = LINE('',#13881,#13882);+#13881 = CARTESIAN_POINT('',(0.151128882882,0.));+#13882 = VECTOR('',#13883,1.);+#13883 = DIRECTION('',(0.,-1.));+#13884 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13885 = PCURVE('',#13118,#13886);+#13886 = DEFINITIONAL_REPRESENTATION('',(#13887),#13891);+#13887 = LINE('',#13888,#13889);+#13888 = CARTESIAN_POINT('',(0.,0.));+#13889 = VECTOR('',#13890,1.);+#13890 = DIRECTION('',(0.,-1.));+#13891 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13892 = ADVANCED_FACE('',(#13893),#13118,.T.);+#13893 = FACE_BOUND('',#13894,.T.);+#13894 = EDGE_LOOP('',(#13895,#13914,#13915,#13916));+#13895 = ORIENTED_EDGE('',*,*,#13896,.F.);+#13896 = EDGE_CURVE('',#13850,#13776,#13897,.T.);+#13897 = SURFACE_CURVE('',#13898,(#13902,#13908),.PCURVE_S1.);+#13898 = LINE('',#13899,#13900);+#13899 = CARTESIAN_POINT('',(-0.647869204567,-3.01062593006E-02,1.02));+#13900 = VECTOR('',#13901,1.);+#13901 = DIRECTION('',(1.,0.,-0.));+#13902 = PCURVE('',#13118,#13903);+#13903 = DEFINITIONAL_REPRESENTATION('',(#13904),#13907);+#13904 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13905,#13906),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.842130795433,0.923303367978),+ .PIECEWISE_BEZIER_KNOTS.);+#13905 = CARTESIAN_POINT('',(0.,-5.E-02));+#13906 = CARTESIAN_POINT('',(8.117257254464E-02,-5.E-02));+#13907 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13908 = PCURVE('',#13792,#13909);+#13909 = DEFINITIONAL_REPRESENTATION('',(#13910),#13913);+#13910 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13911,#13912),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.842130795433,0.923303367978),+ .PIECEWISE_BEZIER_KNOTS.);+#13911 = CARTESIAN_POINT('',(1.520106259301,1.684261590867));+#13912 = CARTESIAN_POINT('',(1.520106259301,1.765434163411));+#13913 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13914 = ORIENTED_EDGE('',*,*,#13872,.T.);+#13915 = ORIENTED_EDGE('',*,*,#13104,.T.);+#13916 = ORIENTED_EDGE('',*,*,#13803,.F.);+#13917 = ADVANCED_FACE('',(#13918),#13170,.T.);+#13918 = FACE_BOUND('',#13919,.T.);+#13919 = EDGE_LOOP('',(#13920,#13965,#13986,#13987));+#13920 = ORIENTED_EDGE('',*,*,#13921,.T.);+#13921 = EDGE_CURVE('',#13922,#13924,#13926,.T.);+#13922 = VERTEX_POINT('',#13923);+#13923 = CARTESIAN_POINT('',(0.504565662202,8.765113467262E-03,1.02));+#13924 = VERTEX_POINT('',#13925);+#13925 = CARTESIAN_POINT('',(0.465980108352,-8.955659412203E-03,1.02));+#13926 = SURFACE_CURVE('',#13927,(#13936,#13948),.PCURVE_S1.);+#13927 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13928,#13929,#13930,#13931,+ #13932,#13933,#13934,#13935),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.391984928419,1.),.UNSPECIFIED.);+#13928 = CARTESIAN_POINT('',(0.504565662202,8.765113467261E-03,1.02));+#13929 = CARTESIAN_POINT('',(0.501820894163,5.292141662734E-03,1.02));+#13930 = CARTESIAN_POINT('',(0.498805094854,2.272631794908E-03,1.02));+#13931 = CARTESIAN_POINT('',(0.495518278185,-2.930882915044E-04,1.02));+#13932 = CARTESIAN_POINT('',(0.486442219014,-5.680640673949E-03,1.02));+#13933 = CARTESIAN_POINT('',(0.480272153208,-7.864330872274E-03,1.02));+#13934 = CARTESIAN_POINT('',(0.473450983953,-8.955659412203E-03,1.02));+#13935 = CARTESIAN_POINT('',(0.465980108352,-8.955659412203E-03,1.02));+#13936 = PCURVE('',#13170,#13937);+#13937 = DEFINITIONAL_REPRESENTATION('',(#13938),#13947);+#13938 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13939,#13940,#13941,#13942,+ #13943,#13944,#13945,#13946),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.391984928419,1.),.UNSPECIFIED.);+#13939 = CARTESIAN_POINT('',(1.,-5.E-02));+#13940 = CARTESIAN_POINT('',(0.902008455609,-5.E-02));+#13941 = CARTESIAN_POINT('',(0.804008431117,-5.E-02));+#13942 = CARTESIAN_POINT('',(0.706004189278,-5.E-02));+#13943 = CARTESIAN_POINT('',(0.455983889586,-5.E-02));+#13944 = CARTESIAN_POINT('',(0.303967901529,-5.E-02));+#13945 = CARTESIAN_POINT('',(0.151967979071,-5.E-02));+#13946 = CARTESIAN_POINT('',(0.,-5.E-02));+#13947 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13948 = PCURVE('',#13949,#13954);+#13949 = PLANE('',#13950);+#13950 = AXIS2_PLACEMENT_3D('',#13951,#13952,#13953);+#13951 = CARTESIAN_POINT('',(-1.49,1.49,1.02));+#13952 = DIRECTION('',(0.,0.,1.));+#13953 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#13954 = DEFINITIONAL_REPRESENTATION('',(#13955),#13964);+#13955 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13956,#13957,#13958,#13959,+ #13960,#13961,#13962,#13963),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.391984928419,1.),.UNSPECIFIED.);+#13956 = CARTESIAN_POINT('',(1.481234886533,1.994565662202));+#13957 = CARTESIAN_POINT('',(1.484707858337,1.991820894163));+#13958 = CARTESIAN_POINT('',(1.487727368205,1.988805094854));+#13959 = CARTESIAN_POINT('',(1.490293088292,1.985518278185));+#13960 = CARTESIAN_POINT('',(1.495680640674,1.976442219014));+#13961 = CARTESIAN_POINT('',(1.497864330872,1.970272153208));+#13962 = CARTESIAN_POINT('',(1.498955659412,1.963450983953));+#13963 = CARTESIAN_POINT('',(1.498955659412,1.955980108352));+#13964 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13965 = ORIENTED_EDGE('',*,*,#13966,.T.);+#13966 = EDGE_CURVE('',#13924,#13153,#13967,.T.);+#13967 = SURFACE_CURVE('',#13968,(#13972,#13979),.PCURVE_S1.);+#13968 = LINE('',#13969,#13970);+#13969 = CARTESIAN_POINT('',(0.465980108352,-8.955659412203E-03,1.07));+#13970 = VECTOR('',#13971,1.);+#13971 = DIRECTION('',(-0.,-0.,-1.));+#13972 = PCURVE('',#13170,#13973);+#13973 = DEFINITIONAL_REPRESENTATION('',(#13974),#13978);+#13974 = LINE('',#13975,#13976);+#13975 = CARTESIAN_POINT('',(0.,0.));+#13976 = VECTOR('',#13977,1.);+#13977 = DIRECTION('',(0.,-1.));+#13978 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13979 = PCURVE('',#13378,#13980);+#13980 = DEFINITIONAL_REPRESENTATION('',(#13981),#13985);+#13981 = LINE('',#13982,#13983);+#13982 = CARTESIAN_POINT('',(1.,0.));+#13983 = VECTOR('',#13984,1.);+#13984 = DIRECTION('',(0.,-1.));+#13985 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13986 = ORIENTED_EDGE('',*,*,#13152,.T.);+#13987 = ORIENTED_EDGE('',*,*,#13988,.F.);+#13988 = EDGE_CURVE('',#13922,#13155,#13989,.T.);+#13989 = SURFACE_CURVE('',#13990,(#13994,#14001),.PCURVE_S1.);+#13990 = LINE('',#13991,#13992);+#13991 = CARTESIAN_POINT('',(0.504565662202,8.765113467262E-03,1.07));+#13992 = VECTOR('',#13993,1.);+#13993 = DIRECTION('',(-0.,-0.,-1.));+#13994 = PCURVE('',#13170,#13995);+#13995 = DEFINITIONAL_REPRESENTATION('',(#13996),#14000);+#13996 = LINE('',#13997,#13998);+#13997 = CARTESIAN_POINT('',(1.,0.));+#13998 = VECTOR('',#13999,1.);+#13999 = DIRECTION('',(0.,-1.));+#14000 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14001 = PCURVE('',#13200,#14002);+#14002 = DEFINITIONAL_REPRESENTATION('',(#14003),#14007);+#14003 = LINE('',#14004,#14005);+#14004 = CARTESIAN_POINT('',(0.,0.));+#14005 = VECTOR('',#14006,1.);+#14006 = DIRECTION('',(0.,-1.));+#14007 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14008 = ADVANCED_FACE('',(#14009),#13200,.T.);+#14009 = FACE_BOUND('',#14010,.T.);+#14010 = EDGE_LOOP('',(#14011,#14040,#14041,#14042));+#14011 = ORIENTED_EDGE('',*,*,#14012,.T.);+#14012 = EDGE_CURVE('',#14013,#13922,#14015,.T.);+#14013 = VERTEX_POINT('',#14014);+#14014 = CARTESIAN_POINT('',(0.518570789156,5.773542131696E-02,1.02));+#14015 = SURFACE_CURVE('',#14016,(#14022,#14031),.PCURVE_S1.);+#14016 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#14017,#14018,#14019,#14020,+ #14021),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#14017 = CARTESIAN_POINT('',(0.518570789156,5.773542131696E-02,1.02));+#14018 = CARTESIAN_POINT('',(0.518570789156,4.211988309052E-02,1.02));+#14019 = CARTESIAN_POINT('',(0.516239360134,2.874770869499E-02,1.02));+#14020 = CARTESIAN_POINT('',(0.511570600709,1.762850504669E-02,1.02));+#14021 = CARTESIAN_POINT('',(0.504565662202,8.765113467261E-03,1.02));+#14022 = PCURVE('',#13200,#14023);+#14023 = DEFINITIONAL_REPRESENTATION('',(#14024),#14030);+#14024 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#14025,#14026,#14027,#14028,+ #14029),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#14025 = CARTESIAN_POINT('',(1.,-5.E-02));+#14026 = CARTESIAN_POINT('',(0.750147670336,-5.E-02));+#14027 = CARTESIAN_POINT('',(0.500155100448,-5.E-02));+#14028 = CARTESIAN_POINT('',(0.25008479144,-5.E-02));+#14029 = CARTESIAN_POINT('',(0.,-5.E-02));+#14030 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14031 = PCURVE('',#13949,#14032);+#14032 = DEFINITIONAL_REPRESENTATION('',(#14033),#14039);+#14033 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#14034,#14035,#14036,#14037,+ #14038),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#14034 = CARTESIAN_POINT('',(1.432264578683,2.008570789156));+#14035 = CARTESIAN_POINT('',(1.447880116909,2.008570789156));+#14036 = CARTESIAN_POINT('',(1.461252291305,2.006239360134));+#14037 = CARTESIAN_POINT('',(1.472371494953,2.001570600709));+#14038 = CARTESIAN_POINT('',(1.481234886533,1.994565662202));+#14039 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14040 = ORIENTED_EDGE('',*,*,#13988,.T.);+#14041 = ORIENTED_EDGE('',*,*,#13184,.T.);+#14042 = ORIENTED_EDGE('',*,*,#14043,.F.);+#14043 = EDGE_CURVE('',#14013,#13185,#14044,.T.);+#14044 = SURFACE_CURVE('',#14045,(#14049,#14056),.PCURVE_S1.);+#14045 = LINE('',#14046,#14047);+#14046 = CARTESIAN_POINT('',(0.518570789156,5.773542131696E-02,1.07));+#14047 = VECTOR('',#14048,1.);+#14048 = DIRECTION('',(-0.,-0.,-1.));+#14049 = PCURVE('',#13200,#14050);+#14050 = DEFINITIONAL_REPRESENTATION('',(#14051),#14055);+#14051 = LINE('',#14052,#14053);+#14052 = CARTESIAN_POINT('',(1.,0.));+#14053 = VECTOR('',#14054,1.);+#14054 = DIRECTION('',(0.,-1.));+#14055 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14056 = PCURVE('',#13230,#14057);+#14057 = DEFINITIONAL_REPRESENTATION('',(#14058),#14062);+#14058 = LINE('',#14059,#14060);+#14059 = CARTESIAN_POINT('',(0.,0.));+#14060 = VECTOR('',#14061,1.);+#14061 = DIRECTION('',(0.,-1.));+#14062 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14063 = ADVANCED_FACE('',(#14064),#13230,.T.);+#14064 = FACE_BOUND('',#14065,.T.);+#14065 = EDGE_LOOP('',(#14066,#14095,#14096,#14097));+#14066 = ORIENTED_EDGE('',*,*,#14067,.T.);+#14067 = EDGE_CURVE('',#14068,#14013,#14070,.T.);+#14068 = VERTEX_POINT('',#14069);+#14069 = CARTESIAN_POINT('',(0.504565662202,0.106705729167,1.02));+#14070 = SURFACE_CURVE('',#14071,(#14077,#14086),.PCURVE_S1.);+#14071 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#14072,#14073,#14074,#14075,+ #14076),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#14072 = CARTESIAN_POINT('',(0.504565662202,0.106705729167,1.02));+#14073 = CARTESIAN_POINT('',(0.511570600709,9.784233758643E-02,1.02));+#14074 = CARTESIAN_POINT('',(0.516239360135,8.672313394094E-02,1.02));+#14075 = CARTESIAN_POINT('',(0.518570789156,7.335095954293E-02,1.02));+#14076 = CARTESIAN_POINT('',(0.518570789156,5.773542131696E-02,1.02));+#14077 = PCURVE('',#13230,#14078);+#14078 = DEFINITIONAL_REPRESENTATION('',(#14079),#14085);+#14079 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#14080,#14081,#14082,#14083,+ #14084),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#14080 = CARTESIAN_POINT('',(1.,-5.E-02));+#14081 = CARTESIAN_POINT('',(0.749915208537,-5.E-02));+#14082 = CARTESIAN_POINT('',(0.499844899577,-5.E-02));+#14083 = CARTESIAN_POINT('',(0.249852329656,-5.E-02));+#14084 = CARTESIAN_POINT('',(0.,-5.E-02));+#14085 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14086 = PCURVE('',#13949,#14087);+#14087 = DEFINITIONAL_REPRESENTATION('',(#14088),#14094);+#14088 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#14089,#14090,#14091,#14092,+ #14093),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#14089 = CARTESIAN_POINT('',(1.383294270833,1.994565662202));+#14090 = CARTESIAN_POINT('',(1.392157662414,2.001570600709));+#14091 = CARTESIAN_POINT('',(1.403276866059,2.006239360135));+#14092 = CARTESIAN_POINT('',(1.416649040457,2.008570789156));+#14093 = CARTESIAN_POINT('',(1.432264578683,2.008570789156));+#14094 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14095 = ORIENTED_EDGE('',*,*,#14043,.T.);+#14096 = ORIENTED_EDGE('',*,*,#13214,.T.);+#14097 = ORIENTED_EDGE('',*,*,#14098,.F.);+#14098 = EDGE_CURVE('',#14068,#13215,#14099,.T.);+#14099 = SURFACE_CURVE('',#14100,(#14104,#14111),.PCURVE_S1.);+#14100 = LINE('',#14101,#14102);+#14101 = CARTESIAN_POINT('',(0.504565662202,0.106705729167,1.07));+#14102 = VECTOR('',#14103,1.);+#14103 = DIRECTION('',(-0.,-0.,-1.));+#14104 = PCURVE('',#13230,#14105);+#14105 = DEFINITIONAL_REPRESENTATION('',(#14106),#14110);+#14106 = LINE('',#14107,#14108);+#14107 = CARTESIAN_POINT('',(1.,0.));+#14108 = VECTOR('',#14109,1.);+#14109 = DIRECTION('',(0.,-1.));+#14110 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14111 = PCURVE('',#13260,#14112);+#14112 = DEFINITIONAL_REPRESENTATION('',(#14113),#14117);+#14113 = LINE('',#14114,#14115);+#14114 = CARTESIAN_POINT('',(0.,0.));+#14115 = VECTOR('',#14116,1.);+#14116 = DIRECTION('',(0.,-1.));+#14117 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14118 = ADVANCED_FACE('',(#14119),#13260,.T.);+#14119 = FACE_BOUND('',#14120,.T.);+#14120 = EDGE_LOOP('',(#14121,#14159,#14160,#14161));+#14121 = ORIENTED_EDGE('',*,*,#14122,.T.);+#14122 = EDGE_CURVE('',#14123,#14068,#14125,.T.);+#14123 = VERTEX_POINT('',#14124);+#14124 = CARTESIAN_POINT('',(0.465980108352,0.124426502046,1.02));+#14125 = SURFACE_CURVE('',#14126,(#14135,#14147),.PCURVE_S1.);+#14126 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#14127,#14128,#14129,#14130,+ #14131,#14132,#14133,#14134),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.612014746712,1.),.UNSPECIFIED.);+#14127 = CARTESIAN_POINT('',(0.465980108352,0.124426502046,1.02));+#14128 = CARTESIAN_POINT('',(0.473500129243,0.124426502046,1.02));+#14129 = CARTESIAN_POINT('',(0.480361867809,0.123320768219,1.02));+#14130 = CARTESIAN_POINT('',(0.486563899193,0.121108246914,1.02));+#14131 = CARTESIAN_POINT('',(0.49561880607,0.115685250094,1.02));+#14132 = CARTESIAN_POINT('',(0.498866610929,0.113136543611,1.02));+#14133 = CARTESIAN_POINT('',(0.501848900804,0.110143263998,1.02));+#14134 = CARTESIAN_POINT('',(0.504565662202,0.106705729167,1.02));+#14135 = PCURVE('',#13260,#14136);+#14136 = DEFINITIONAL_REPRESENTATION('',(#14137),#14146);+#14137 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#14138,#14139,#14140,#14141,+ #14142,#14143,#14144,#14145),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.612014746712,1.),.UNSPECIFIED.);+#14138 = CARTESIAN_POINT('',(1.,-5.E-02));+#14139 = CARTESIAN_POINT('',(0.847032337506,-5.E-02));+#14140 = CARTESIAN_POINT('',(0.69403231007,-5.E-02));+#14141 = CARTESIAN_POINT('',(0.541016110785,-5.E-02));+#14142 = CARTESIAN_POINT('',(0.290995810446,-5.E-02));+#14143 = CARTESIAN_POINT('',(0.193991654771,-5.E-02));+#14144 = CARTESIAN_POINT('',(9.699167339941E-02,-5.E-02));+#14145 = CARTESIAN_POINT('',(0.,-5.E-02));+#14146 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14147 = PCURVE('',#13949,#14148);+#14148 = DEFINITIONAL_REPRESENTATION('',(#14149),#14158);+#14149 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#14150,#14151,#14152,#14153,+ #14154,#14155,#14156,#14157),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.612014746712,1.),.UNSPECIFIED.);+#14150 = CARTESIAN_POINT('',(1.365573497954,1.955980108352));+#14151 = CARTESIAN_POINT('',(1.365573497954,1.963500129243));+#14152 = CARTESIAN_POINT('',(1.366679231781,1.970361867809));+#14153 = CARTESIAN_POINT('',(1.368891753086,1.976563899193));+#14154 = CARTESIAN_POINT('',(1.374314749906,1.98561880607));+#14155 = CARTESIAN_POINT('',(1.376863456389,1.988866610929));+#14156 = CARTESIAN_POINT('',(1.379856736002,1.991848900804));+#14157 = CARTESIAN_POINT('',(1.383294270833,1.994565662202));+#14158 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14159 = ORIENTED_EDGE('',*,*,#14098,.T.);+#14160 = ORIENTED_EDGE('',*,*,#13244,.T.);+#14161 = ORIENTED_EDGE('',*,*,#14162,.F.);+#14162 = EDGE_CURVE('',#14123,#13245,#14163,.T.);+#14163 = SURFACE_CURVE('',#14164,(#14168,#14175),.PCURVE_S1.);+#14164 = LINE('',#14165,#14166);+#14165 = CARTESIAN_POINT('',(0.465980108352,0.124426502046,1.07));+#14166 = VECTOR('',#14167,1.);+#14167 = DIRECTION('',(-0.,-0.,-1.));+#14168 = PCURVE('',#13260,#14169);+#14169 = DEFINITIONAL_REPRESENTATION('',(#14170),#14174);+#14170 = LINE('',#14171,#14172);+#14171 = CARTESIAN_POINT('',(1.,0.));+#14172 = VECTOR('',#14173,1.);+#14173 = DIRECTION('',(0.,-1.));+#14174 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14175 = PCURVE('',#13290,#14176);+#14176 = DEFINITIONAL_REPRESENTATION('',(#14177),#14181);+#14177 = LINE('',#14178,#14179);+#14178 = CARTESIAN_POINT('',(0.,0.));+#14179 = VECTOR('',#14180,1.);+#14180 = DIRECTION('',(0.,-1.));+#14181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14182 = ADVANCED_FACE('',(#14183),#13290,.T.);+#14183 = FACE_BOUND('',#14184,.T.);+#14184 = EDGE_LOOP('',(#14185,#14223,#14224,#14225));+#14185 = ORIENTED_EDGE('',*,*,#14186,.T.);+#14186 = EDGE_CURVE('',#14187,#14123,#14189,.T.);+#14187 = VERTEX_POINT('',#14188);+#14188 = CARTESIAN_POINT('',(0.427489827474,0.107563185919,1.02));+#14189 = SURFACE_CURVE('',#14190,(#14199,#14211),.PCURVE_S1.);+#14190 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#14191,#14192,#14193,#14194,+ #14195,#14196,#14197,#14198),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.27297371298,1.),.UNSPECIFIED.);+#14191 = CARTESIAN_POINT('',(0.427489827474,0.107563185919,1.02));+#14192 = CARTESIAN_POINT('',(0.429258396707,0.109864926759,1.02));+#14193 = CARTESIAN_POINT('',(0.43118324333,0.111957319994,1.02));+#14194 = CARTESIAN_POINT('',(0.43326435956,0.113840273539,1.02));+#14195 = CARTESIAN_POINT('',(0.441460521929,0.119970815852,1.02));+#14196 = CARTESIAN_POINT('',(0.448527494048,0.122941965345,1.02));+#14197 = CARTESIAN_POINT('',(0.456701685145,0.124426502046,1.02));+#14198 = CARTESIAN_POINT('',(0.465980108352,0.124426502046,1.02));+#14199 = PCURVE('',#13290,#14200);+#14200 = DEFINITIONAL_REPRESENTATION('',(#14201),#14210);+#14201 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#14202,#14203,#14204,#14205,+ #14206,#14207,#14208,#14209),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.27297371298,1.),.UNSPECIFIED.);+#14202 = CARTESIAN_POINT('',(1.,-5.E-02));+#14203 = CARTESIAN_POINT('',(0.931753018725,-5.E-02));+#14204 = CARTESIAN_POINT('',(0.863503026607,-5.E-02));+#14205 = CARTESIAN_POINT('',(0.795251520862,-5.E-02));+#14206 = CARTESIAN_POINT('',(0.545221874722,-5.E-02));+#14207 = CARTESIAN_POINT('',(0.363443633209,-5.E-02));+#14208 = CARTESIAN_POINT('',(0.181693617912,-5.E-02));+#14209 = CARTESIAN_POINT('',(0.,-5.E-02));+#14210 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14211 = PCURVE('',#13949,#14212);+#14212 = DEFINITIONAL_REPRESENTATION('',(#14213),#14222);+#14213 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#14214,#14215,#14216,#14217,+ #14218,#14219,#14220,#14221),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.27297371298,1.),.UNSPECIFIED.);+#14214 = CARTESIAN_POINT('',(1.382436814081,1.917489827474));+#14215 = CARTESIAN_POINT('',(1.380135073241,1.919258396707));+#14216 = CARTESIAN_POINT('',(1.378042680006,1.92118324333));+#14217 = CARTESIAN_POINT('',(1.376159726461,1.92326435956));+#14218 = CARTESIAN_POINT('',(1.370029184148,1.931460521929));+#14219 = CARTESIAN_POINT('',(1.367058034655,1.938527494048));+#14220 = CARTESIAN_POINT('',(1.365573497954,1.946701685145));+#14221 = CARTESIAN_POINT('',(1.365573497954,1.955980108352));+#14222 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14223 = ORIENTED_EDGE('',*,*,#14162,.T.);+#14224 = ORIENTED_EDGE('',*,*,#13274,.T.);+#14225 = ORIENTED_EDGE('',*,*,#14226,.F.);+#14226 = EDGE_CURVE('',#14187,#13275,#14227,.T.);+#14227 = SURFACE_CURVE('',#14228,(#14232,#14239),.PCURVE_S1.);+#14228 = LINE('',#14229,#14230);+#14229 = CARTESIAN_POINT('',(0.427489827474,0.107563185919,1.07));+#14230 = VECTOR('',#14231,1.);+#14231 = DIRECTION('',(-0.,-0.,-1.));+#14232 = PCURVE('',#13290,#14233);+#14233 = DEFINITIONAL_REPRESENTATION('',(#14234),#14238);+#14234 = LINE('',#14235,#14236);+#14235 = CARTESIAN_POINT('',(1.,0.));+#14236 = VECTOR('',#14237,1.);+#14237 = DIRECTION('',(0.,-1.));+#14238 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14239 = PCURVE('',#13320,#14240);+#14240 = DEFINITIONAL_REPRESENTATION('',(#14241),#14245);+#14241 = LINE('',#14242,#14243);+#14242 = CARTESIAN_POINT('',(0.,0.));+#14243 = VECTOR('',#14244,1.);+#14244 = DIRECTION('',(0.,-1.));+#14245 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14246 = ADVANCED_FACE('',(#14247),#13320,.T.);+#14247 = FACE_BOUND('',#14248,.T.);+#14248 = EDGE_LOOP('',(#14249,#14278,#14279,#14280));+#14249 = ORIENTED_EDGE('',*,*,#14250,.T.);+#14250 = EDGE_CURVE('',#14251,#14187,#14253,.T.);+#14251 = VERTEX_POINT('',#14252);+#14252 = CARTESIAN_POINT('',(0.414532703218,5.773542131696E-02,1.02));+#14253 = SURFACE_CURVE('',#14254,(#14260,#14269),.PCURVE_S1.);+#14254 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#14255,#14256,#14257,#14258,+ #14259),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#14255 = CARTESIAN_POINT('',(0.414532703218,5.773542131696E-02,1.02));+#14256 = CARTESIAN_POINT('',(0.414532703218,7.420489149914E-02,1.02));+#14257 = CARTESIAN_POINT('',(0.41668888016,8.800659317233E-02,1.02));+#14258 = CARTESIAN_POINT('',(0.421008084923,9.912738862833E-02,1.02));+#14259 = CARTESIAN_POINT('',(0.427489827474,0.107563185919,1.02));+#14260 = PCURVE('',#13320,#14261);+#14261 = DEFINITIONAL_REPRESENTATION('',(#14262),#14268);+#14262 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#14263,#14264,#14265,#14266,+ #14267),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#14263 = CARTESIAN_POINT('',(1.,-5.E-02));+#14264 = CARTESIAN_POINT('',(0.750193451669,-5.E-02));+#14265 = CARTESIAN_POINT('',(0.500210980073,-5.E-02));+#14266 = CARTESIAN_POINT('',(0.250122728736,-5.E-02));+#14267 = CARTESIAN_POINT('',(0.,-5.E-02));+#14268 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14269 = PCURVE('',#13949,#14270);+#14270 = DEFINITIONAL_REPRESENTATION('',(#14271),#14277);+#14271 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#14272,#14273,#14274,#14275,+ #14276),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#14272 = CARTESIAN_POINT('',(1.432264578683,1.904532703218));+#14273 = CARTESIAN_POINT('',(1.415795108501,1.904532703218));+#14274 = CARTESIAN_POINT('',(1.401993406828,1.90668888016));+#14275 = CARTESIAN_POINT('',(1.390872611372,1.911008084923));+#14276 = CARTESIAN_POINT('',(1.382436814081,1.917489827474));+#14277 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14278 = ORIENTED_EDGE('',*,*,#14226,.T.);+#14279 = ORIENTED_EDGE('',*,*,#13304,.T.);+#14280 = ORIENTED_EDGE('',*,*,#14281,.F.);+#14281 = EDGE_CURVE('',#14251,#13305,#14282,.T.);+#14282 = SURFACE_CURVE('',#14283,(#14287,#14294),.PCURVE_S1.);+#14283 = LINE('',#14284,#14285);+#14284 = CARTESIAN_POINT('',(0.414532703218,5.773542131696E-02,1.07));+#14285 = VECTOR('',#14286,1.);+#14286 = DIRECTION('',(-0.,-0.,-1.));+#14287 = PCURVE('',#13320,#14288);+#14288 = DEFINITIONAL_REPRESENTATION('',(#14289),#14293);+#14289 = LINE('',#14290,#14291);+#14290 = CARTESIAN_POINT('',(1.,0.));+#14291 = VECTOR('',#14292,1.);+#14292 = DIRECTION('',(0.,-1.));+#14293 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14294 = PCURVE('',#13350,#14295);+#14295 = DEFINITIONAL_REPRESENTATION('',(#14296),#14300);+#14296 = LINE('',#14297,#14298);+#14297 = CARTESIAN_POINT('',(0.,0.));+#14298 = VECTOR('',#14299,1.);+#14299 = DIRECTION('',(0.,-1.));+#14300 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14301 = ADVANCED_FACE('',(#14302),#13350,.T.);+#14302 = FACE_BOUND('',#14303,.T.);+#14303 = EDGE_LOOP('',(#14304,#14333,#14334,#14335));+#14304 = ORIENTED_EDGE('',*,*,#14305,.T.);+#14305 = EDGE_CURVE('',#14306,#14251,#14308,.T.);+#14306 = VERTEX_POINT('',#14307);+#14307 = CARTESIAN_POINT('',(0.427394554501,7.812383742559E-03,1.02));+#14308 = SURFACE_CURVE('',#14309,(#14315,#14324),.PCURVE_S1.);+#14309 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#14310,#14311,#14312,#14313,+ #14314),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#14310 = CARTESIAN_POINT('',(0.427394554501,7.812383742559E-03,1.02));+#14311 = CARTESIAN_POINT('',(0.420960369201,1.620065494903E-02,1.02));+#14312 = CARTESIAN_POINT('',(0.416672938264,2.732163768635E-02,1.02));+#14313 = CARTESIAN_POINT('',(0.414532703218,4.117109056741E-02,1.02));+#14314 = CARTESIAN_POINT('',(0.414532703218,5.773542131696E-02,1.02));+#14315 = PCURVE('',#13350,#14316);+#14316 = DEFINITIONAL_REPRESENTATION('',(#14317),#14323);+#14317 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#14318,#14319,#14320,#14321,+ #14322),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#14318 = CARTESIAN_POINT('',(1.,-5.E-02));+#14319 = CARTESIAN_POINT('',(0.749873281901,-5.E-02));+#14320 = CARTESIAN_POINT('',(0.499782946657,-5.E-02));+#14321 = CARTESIAN_POINT('',(0.249801440771,-5.E-02));+#14322 = CARTESIAN_POINT('',(0.,-5.E-02));+#14323 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14324 = PCURVE('',#13949,#14325);+#14325 = DEFINITIONAL_REPRESENTATION('',(#14326),#14332);+#14326 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#14327,#14328,#14329,#14330,+ #14331),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#14327 = CARTESIAN_POINT('',(1.482187616257,1.917394554501));+#14328 = CARTESIAN_POINT('',(1.473799345051,1.910960369201));+#14329 = CARTESIAN_POINT('',(1.462678362314,1.906672938264));+#14330 = CARTESIAN_POINT('',(1.448828909433,1.904532703218));+#14331 = CARTESIAN_POINT('',(1.432264578683,1.904532703218));+#14332 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14333 = ORIENTED_EDGE('',*,*,#14281,.T.);+#14334 = ORIENTED_EDGE('',*,*,#13334,.T.);+#14335 = ORIENTED_EDGE('',*,*,#14336,.F.);+#14336 = EDGE_CURVE('',#14306,#13335,#14337,.T.);+#14337 = SURFACE_CURVE('',#14338,(#14342,#14349),.PCURVE_S1.);+#14338 = LINE('',#14339,#14340);+#14339 = CARTESIAN_POINT('',(0.427394554501,7.812383742559E-03,1.07));+#14340 = VECTOR('',#14341,1.);+#14341 = DIRECTION('',(-0.,-0.,-1.));+#14342 = PCURVE('',#13350,#14343);+#14343 = DEFINITIONAL_REPRESENTATION('',(#14344),#14348);+#14344 = LINE('',#14345,#14346);+#14345 = CARTESIAN_POINT('',(1.,0.));+#14346 = VECTOR('',#14347,1.);+#14347 = DIRECTION('',(0.,-1.));+#14348 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14349 = PCURVE('',#13378,#14350);+#14350 = DEFINITIONAL_REPRESENTATION('',(#14351),#14355);+#14351 = LINE('',#14352,#14353);+#14352 = CARTESIAN_POINT('',(0.,0.));+#14353 = VECTOR('',#14354,1.);+#14354 = DIRECTION('',(0.,-1.));+#14355 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14356 = ADVANCED_FACE('',(#14357),#13378,.T.);+#14357 = FACE_BOUND('',#14358,.T.);+#14358 = EDGE_LOOP('',(#14359,#14395,#14396,#14397));+#14359 = ORIENTED_EDGE('',*,*,#14360,.T.);+#14360 = EDGE_CURVE('',#13924,#14306,#14361,.T.);+#14361 = SURFACE_CURVE('',#14362,(#14371,#14383),.PCURVE_S1.);+#14362 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#14363,#14364,#14365,#14366,+ #14367,#14368,#14369,#14370),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.738027836364,1.),.UNSPECIFIED.);+#14363 = CARTESIAN_POINT('',(0.465980108352,-8.955659412203E-03,1.02));+#14364 = CARTESIAN_POINT('',(0.456491150763,-8.955659412203E-03,1.02));+#14365 = CARTESIAN_POINT('',(0.448165874281,-7.434547930896E-03,1.02));+#14366 = CARTESIAN_POINT('',(0.441007515287,-4.390099970352E-03,1.02));+#14367 = CARTESIAN_POINT('',(0.432890664542,1.798087560124E-03,1.02));+#14368 = CARTESIAN_POINT('',(0.430911428613,3.611066320735E-03,1.02));+#14369 = CARTESIAN_POINT('',(0.429079389387,5.615858261774E-03,1.02));+#14370 = CARTESIAN_POINT('',(0.427394554501,7.812383742559E-03,1.02));+#14371 = PCURVE('',#13378,#14372);+#14372 = DEFINITIONAL_REPRESENTATION('',(#14373),#14382);+#14373 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#14374,#14375,#14376,#14377,+ #14378,#14379,#14380,#14381),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.738027836364,1.),.UNSPECIFIED.);+#14374 = CARTESIAN_POINT('',(1.,-5.E-02));+#14375 = CARTESIAN_POINT('',(0.815560035265,-5.E-02));+#14376 = CARTESIAN_POINT('',(0.63106019305,-5.E-02));+#14377 = CARTESIAN_POINT('',(0.446530206758,-5.E-02));+#14378 = CARTESIAN_POINT('',(0.196498707042,-5.E-02));+#14379 = CARTESIAN_POINT('',(0.130997385098,-5.E-02));+#14380 = CARTESIAN_POINT('',(6.549737081758E-02,-5.E-02));+#14381 = CARTESIAN_POINT('',(0.,-5.E-02));+#14382 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14383 = PCURVE('',#13949,#14384);+#14384 = DEFINITIONAL_REPRESENTATION('',(#14385),#14394);+#14385 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#14386,#14387,#14388,#14389,+ #14390,#14391,#14392,#14393),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.738027836364,1.),.UNSPECIFIED.);+#14386 = CARTESIAN_POINT('',(1.498955659412,1.955980108352));+#14387 = CARTESIAN_POINT('',(1.498955659412,1.946491150763));+#14388 = CARTESIAN_POINT('',(1.497434547931,1.938165874281));+#14389 = CARTESIAN_POINT('',(1.49439009997,1.931007515287));+#14390 = CARTESIAN_POINT('',(1.48820191244,1.922890664542));+#14391 = CARTESIAN_POINT('',(1.486388933679,1.920911428613));+#14392 = CARTESIAN_POINT('',(1.484384141738,1.919079389387));+#14393 = CARTESIAN_POINT('',(1.482187616257,1.917394554501));+#14394 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14395 = ORIENTED_EDGE('',*,*,#14336,.T.);+#14396 = ORIENTED_EDGE('',*,*,#13364,.T.);+#14397 = ORIENTED_EDGE('',*,*,#13966,.F.);+#14398 = ADVANCED_FACE('',(#14399),#13426,.T.);+#14399 = FACE_BOUND('',#14400,.T.);+#14400 = EDGE_LOOP('',(#14401,#14402,#14403,#14404,#14405,#14406,#14407)+ );+#14401 = ORIENTED_EDGE('',*,*,#13742,.F.);+#14402 = ORIENTED_EDGE('',*,*,#13409,.T.);+#14403 = ORIENTED_EDGE('',*,*,#13483,.T.);+#14404 = ORIENTED_EDGE('',*,*,#13530,.T.);+#14405 = ORIENTED_EDGE('',*,*,#13577,.F.);+#14406 = ORIENTED_EDGE('',*,*,#13632,.F.);+#14407 = ORIENTED_EDGE('',*,*,#13687,.F.);+#14408 = ADVANCED_FACE('',(#14409),#13792,.T.);+#14409 = FACE_BOUND('',#14410,.T.);+#14410 = EDGE_LOOP('',(#14411,#14412,#14413));+#14411 = ORIENTED_EDGE('',*,*,#13896,.T.);+#14412 = ORIENTED_EDGE('',*,*,#13775,.T.);+#14413 = ORIENTED_EDGE('',*,*,#13849,.T.);+#14414 = ADVANCED_FACE('',(#14415),#13949,.T.);+#14415 = FACE_BOUND('',#14416,.T.);+#14416 = EDGE_LOOP('',(#14417,#14418,#14419,#14420,#14421,#14422,#14423,+ #14424));+#14417 = ORIENTED_EDGE('',*,*,#13921,.F.);+#14418 = ORIENTED_EDGE('',*,*,#14012,.F.);+#14419 = ORIENTED_EDGE('',*,*,#14067,.F.);+#14420 = ORIENTED_EDGE('',*,*,#14122,.F.);+#14421 = ORIENTED_EDGE('',*,*,#14186,.F.);+#14422 = ORIENTED_EDGE('',*,*,#14250,.F.);+#14423 = ORIENTED_EDGE('',*,*,#14305,.F.);+#14424 = ORIENTED_EDGE('',*,*,#14360,.F.);+#14425 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#14429)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#14426,#14427,#14428)) +REPRESENTATION_CONTEXT('Context #1',+ '3D Context with UNIT and UNCERTAINTY') );+#14426 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#14427 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#14428 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#14429 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-06),#14426,+ 'distance_accuracy_value','confusion accuracy');+#14430 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#14431,#14433);+#14431 = ( REPRESENTATION_RELATIONSHIP('','',#36,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#14432) +SHAPE_REPRESENTATION_RELATIONSHIP() );+#14432 = ITEM_DEFINED_TRANSFORMATION('','',#11,#15);+#14433 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item',+ #14434);+#14434 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('12138','body','',#5,#31,$);+#14435 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#33));+#14436 = SHAPE_DEFINITION_REPRESENTATION(#14437,#14443);+#14437 = PRODUCT_DEFINITION_SHAPE('','',#14438);+#14438 = PRODUCT_DEFINITION('design','',#14439,#14442);+#14439 = PRODUCT_DEFINITION_FORMATION('','',#14440);+#14440 = PRODUCT('laser_etch','laser_etch','',(#14441));+#14441 = PRODUCT_CONTEXT('',#2,'mechanical');+#14442 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#14443 = SHAPE_REPRESENTATION('',(#11,#14444,#15086,#16372,#18622,#19186+ ,#20066,#22086),#22962);+#14444 = MANIFOLD_SOLID_BREP('',#14445);+#14445 = CLOSED_SHELL('',(#14446,#14566,#14642,#14718,#14794,#14870,+ #14946,#15017,#15064,#15075));+#14446 = ADVANCED_FACE('',(#14447),#14461,.F.);+#14447 = FACE_BOUND('',#14448,.F.);+#14448 = EDGE_LOOP('',(#14449,#14484,#14512,#14540));+#14449 = ORIENTED_EDGE('',*,*,#14450,.T.);+#14450 = EDGE_CURVE('',#14451,#14453,#14455,.T.);+#14451 = VERTEX_POINT('',#14452);+#14452 = CARTESIAN_POINT('',(-0.813345365978,0.116995210193,1.015));+#14453 = VERTEX_POINT('',#14454);+#14454 = CARTESIAN_POINT('',(-0.813345365978,0.116995210193,0.975));+#14455 = SURFACE_CURVE('',#14456,(#14460,#14472),.PCURVE_S1.);+#14456 = LINE('',#14457,#14458);+#14457 = CARTESIAN_POINT('',(-0.813345365978,0.116995210193,1.015));+#14458 = VECTOR('',#14459,1.);+#14459 = DIRECTION('',(-0.,-0.,-1.));+#14460 = PCURVE('',#14461,#14466);+#14461 = PLANE('',#14462);+#14462 = AXIS2_PLACEMENT_3D('',#14463,#14464,#14465);+#14463 = CARTESIAN_POINT('',(-0.813345365978,0.116995210193,1.015));+#14464 = DIRECTION('',(1.,0.,0.));+#14465 = DIRECTION('',(0.,1.,0.));+#14466 = DEFINITIONAL_REPRESENTATION('',(#14467),#14471);+#14467 = LINE('',#14468,#14469);+#14468 = CARTESIAN_POINT('',(0.,0.));+#14469 = VECTOR('',#14470,1.);+#14470 = DIRECTION('',(0.,-1.));+#14471 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14472 = PCURVE('',#14473,#14478);+#14473 = PLANE('',#14474);+#14474 = AXIS2_PLACEMENT_3D('',#14475,#14476,#14477);+#14475 = CARTESIAN_POINT('',(-0.723979317801,0.116995210193,1.015));+#14476 = DIRECTION('',(0.,1.,0.));+#14477 = DIRECTION('',(-1.,0.,0.));+#14478 = DEFINITIONAL_REPRESENTATION('',(#14479),#14483);+#14479 = LINE('',#14480,#14481);+#14480 = CARTESIAN_POINT('',(8.936604817708E-02,0.));+#14481 = VECTOR('',#14482,1.);+#14482 = DIRECTION('',(0.,-1.));+#14483 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14484 = ORIENTED_EDGE('',*,*,#14485,.T.);+#14485 = EDGE_CURVE('',#14453,#14486,#14488,.T.);+#14486 = VERTEX_POINT('',#14487);+#14487 = CARTESIAN_POINT('',(-0.813345365978,0.149388020833,0.975));+#14488 = SURFACE_CURVE('',#14489,(#14493,#14500),.PCURVE_S1.);+#14489 = LINE('',#14490,#14491);+#14490 = CARTESIAN_POINT('',(-0.813345365978,0.116995210193,0.975));+#14491 = VECTOR('',#14492,1.);+#14492 = DIRECTION('',(0.,1.,0.));+#14493 = PCURVE('',#14461,#14494);+#14494 = DEFINITIONAL_REPRESENTATION('',(#14495),#14499);+#14495 = LINE('',#14496,#14497);+#14496 = CARTESIAN_POINT('',(0.,-4.E-02));+#14497 = VECTOR('',#14498,1.);+#14498 = DIRECTION('',(1.,0.));+#14499 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14500 = PCURVE('',#14501,#14506);+#14501 = PLANE('',#14502);+#14502 = AXIS2_PLACEMENT_3D('',#14503,#14504,#14505);+#14503 = CARTESIAN_POINT('',(-0.822301025391,-0.135097074963,0.975));+#14504 = DIRECTION('',(0.,0.,1.));+#14505 = DIRECTION('',(1.,0.,0.));+#14506 = DEFINITIONAL_REPRESENTATION('',(#14507),#14511);+#14507 = LINE('',#14508,#14509);+#14508 = CARTESIAN_POINT('',(8.955659412202E-03,0.252092285156));+#14509 = VECTOR('',#14510,1.);+#14510 = DIRECTION('',(0.,1.));+#14511 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14512 = ORIENTED_EDGE('',*,*,#14513,.F.);+#14513 = EDGE_CURVE('',#14514,#14486,#14516,.T.);+#14514 = VERTEX_POINT('',#14515);+#14515 = CARTESIAN_POINT('',(-0.813345365978,0.149388020833,1.015));+#14516 = SURFACE_CURVE('',#14517,(#14521,#14528),.PCURVE_S1.);+#14517 = LINE('',#14518,#14519);+#14518 = CARTESIAN_POINT('',(-0.813345365978,0.149388020833,1.015));+#14519 = VECTOR('',#14520,1.);+#14520 = DIRECTION('',(-0.,-0.,-1.));+#14521 = PCURVE('',#14461,#14522);+#14522 = DEFINITIONAL_REPRESENTATION('',(#14523),#14527);+#14523 = LINE('',#14524,#14525);+#14524 = CARTESIAN_POINT('',(3.239281063988E-02,0.));+#14525 = VECTOR('',#14526,1.);+#14526 = DIRECTION('',(0.,-1.));+#14527 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14528 = PCURVE('',#14529,#14534);+#14529 = PLANE('',#14530);+#14530 = AXIS2_PLACEMENT_3D('',#14531,#14532,#14533);+#14531 = CARTESIAN_POINT('',(-0.813345365978,0.149388020833,1.015));+#14532 = DIRECTION('',(0.,-1.,0.));+#14533 = DIRECTION('',(1.,0.,0.));+#14534 = DEFINITIONAL_REPRESENTATION('',(#14535),#14539);+#14535 = LINE('',#14536,#14537);+#14536 = CARTESIAN_POINT('',(0.,0.));+#14537 = VECTOR('',#14538,1.);+#14538 = DIRECTION('',(0.,-1.));+#14539 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14540 = ORIENTED_EDGE('',*,*,#14541,.F.);+#14541 = EDGE_CURVE('',#14451,#14514,#14542,.T.);+#14542 = SURFACE_CURVE('',#14543,(#14547,#14554),.PCURVE_S1.);+#14543 = LINE('',#14544,#14545);+#14544 = CARTESIAN_POINT('',(-0.813345365978,0.116995210193,1.015));+#14545 = VECTOR('',#14546,1.);+#14546 = DIRECTION('',(0.,1.,0.));+#14547 = PCURVE('',#14461,#14548);+#14548 = DEFINITIONAL_REPRESENTATION('',(#14549),#14553);+#14549 = LINE('',#14550,#14551);+#14550 = CARTESIAN_POINT('',(0.,0.));+#14551 = VECTOR('',#14552,1.);+#14552 = DIRECTION('',(1.,0.));+#14553 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14554 = PCURVE('',#14555,#14560);+#14555 = PLANE('',#14556);+#14556 = AXIS2_PLACEMENT_3D('',#14557,#14558,#14559);+#14557 = CARTESIAN_POINT('',(-0.822301025391,-0.135097074963,1.015));+#14558 = DIRECTION('',(0.,0.,1.));+#14559 = DIRECTION('',(1.,0.,0.));+#14560 = DEFINITIONAL_REPRESENTATION('',(#14561),#14565);+#14561 = LINE('',#14562,#14563);+#14562 = CARTESIAN_POINT('',(8.955659412202E-03,0.252092285156));+#14563 = VECTOR('',#14564,1.);+#14564 = DIRECTION('',(0.,1.));+#14565 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14566 = ADVANCED_FACE('',(#14567),#14529,.F.);+#14567 = FACE_BOUND('',#14568,.F.);+#14568 = EDGE_LOOP('',(#14569,#14570,#14593,#14621));+#14569 = ORIENTED_EDGE('',*,*,#14513,.T.);+#14570 = ORIENTED_EDGE('',*,*,#14571,.T.);+#14571 = EDGE_CURVE('',#14486,#14572,#14574,.T.);+#14572 = VERTEX_POINT('',#14573);+#14573 = CARTESIAN_POINT('',(-0.596313534691,0.149388020833,0.975));+#14574 = SURFACE_CURVE('',#14575,(#14579,#14586),.PCURVE_S1.);+#14575 = LINE('',#14576,#14577);+#14576 = CARTESIAN_POINT('',(-0.813345365978,0.149388020833,0.975));+#14577 = VECTOR('',#14578,1.);+#14578 = DIRECTION('',(1.,0.,0.));+#14579 = PCURVE('',#14529,#14580);+#14580 = DEFINITIONAL_REPRESENTATION('',(#14581),#14585);+#14581 = LINE('',#14582,#14583);+#14582 = CARTESIAN_POINT('',(0.,-4.E-02));+#14583 = VECTOR('',#14584,1.);+#14584 = DIRECTION('',(1.,0.));+#14585 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14586 = PCURVE('',#14501,#14587);+#14587 = DEFINITIONAL_REPRESENTATION('',(#14588),#14592);+#14588 = LINE('',#14589,#14590);+#14589 = CARTESIAN_POINT('',(8.955659412202E-03,0.284485095796));+#14590 = VECTOR('',#14591,1.);+#14591 = DIRECTION('',(1.,0.));+#14592 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14593 = ORIENTED_EDGE('',*,*,#14594,.F.);+#14594 = EDGE_CURVE('',#14595,#14572,#14597,.T.);+#14595 = VERTEX_POINT('',#14596);+#14596 = CARTESIAN_POINT('',(-0.596313534691,0.149388020833,1.015));+#14597 = SURFACE_CURVE('',#14598,(#14602,#14609),.PCURVE_S1.);+#14598 = LINE('',#14599,#14600);+#14599 = CARTESIAN_POINT('',(-0.596313534691,0.149388020833,1.015));+#14600 = VECTOR('',#14601,1.);+#14601 = DIRECTION('',(-0.,-0.,-1.));+#14602 = PCURVE('',#14529,#14603);+#14603 = DEFINITIONAL_REPRESENTATION('',(#14604),#14608);+#14604 = LINE('',#14605,#14606);+#14605 = CARTESIAN_POINT('',(0.217031831287,0.));+#14606 = VECTOR('',#14607,1.);+#14607 = DIRECTION('',(0.,-1.));+#14608 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14609 = PCURVE('',#14610,#14615);+#14610 = PLANE('',#14611);+#14611 = AXIS2_PLACEMENT_3D('',#14612,#14613,#14614);+#14612 = CARTESIAN_POINT('',(-0.596313534691,0.149388020833,1.015));+#14613 = DIRECTION('',(-1.,0.,0.));+#14614 = DIRECTION('',(0.,-1.,0.));+#14615 = DEFINITIONAL_REPRESENTATION('',(#14616),#14620);+#14616 = LINE('',#14617,#14618);+#14617 = CARTESIAN_POINT('',(0.,0.));+#14618 = VECTOR('',#14619,1.);+#14619 = DIRECTION('',(0.,-1.));+#14620 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14621 = ORIENTED_EDGE('',*,*,#14622,.F.);+#14622 = EDGE_CURVE('',#14514,#14595,#14623,.T.);+#14623 = SURFACE_CURVE('',#14624,(#14628,#14635),.PCURVE_S1.);+#14624 = LINE('',#14625,#14626);+#14625 = CARTESIAN_POINT('',(-0.813345365978,0.149388020833,1.015));+#14626 = VECTOR('',#14627,1.);+#14627 = DIRECTION('',(1.,0.,0.));+#14628 = PCURVE('',#14529,#14629);+#14629 = DEFINITIONAL_REPRESENTATION('',(#14630),#14634);+#14630 = LINE('',#14631,#14632);+#14631 = CARTESIAN_POINT('',(0.,0.));+#14632 = VECTOR('',#14633,1.);+#14633 = DIRECTION('',(1.,0.));+#14634 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14635 = PCURVE('',#14555,#14636);+#14636 = DEFINITIONAL_REPRESENTATION('',(#14637),#14641);+#14637 = LINE('',#14638,#14639);+#14638 = CARTESIAN_POINT('',(8.955659412202E-03,0.284485095796));+#14639 = VECTOR('',#14640,1.);+#14640 = DIRECTION('',(1.,0.));+#14641 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14642 = ADVANCED_FACE('',(#14643),#14610,.F.);+#14643 = FACE_BOUND('',#14644,.F.);+#14644 = EDGE_LOOP('',(#14645,#14646,#14669,#14697));+#14645 = ORIENTED_EDGE('',*,*,#14594,.T.);+#14646 = ORIENTED_EDGE('',*,*,#14647,.T.);+#14647 = EDGE_CURVE('',#14572,#14648,#14650,.T.);+#14648 = VERTEX_POINT('',#14649);+#14649 = CARTESIAN_POINT('',(-0.596313534691,0.116995210193,0.975));+#14650 = SURFACE_CURVE('',#14651,(#14655,#14662),.PCURVE_S1.);+#14651 = LINE('',#14652,#14653);+#14652 = CARTESIAN_POINT('',(-0.596313534691,0.149388020833,0.975));+#14653 = VECTOR('',#14654,1.);+#14654 = DIRECTION('',(0.,-1.,0.));+#14655 = PCURVE('',#14610,#14656);+#14656 = DEFINITIONAL_REPRESENTATION('',(#14657),#14661);+#14657 = LINE('',#14658,#14659);+#14658 = CARTESIAN_POINT('',(0.,-4.E-02));+#14659 = VECTOR('',#14660,1.);+#14660 = DIRECTION('',(1.,0.));+#14661 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14662 = PCURVE('',#14501,#14663);+#14663 = DEFINITIONAL_REPRESENTATION('',(#14664),#14668);+#14664 = LINE('',#14665,#14666);+#14665 = CARTESIAN_POINT('',(0.225987490699,0.284485095796));+#14666 = VECTOR('',#14667,1.);+#14667 = DIRECTION('',(0.,-1.));+#14668 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14669 = ORIENTED_EDGE('',*,*,#14670,.F.);+#14670 = EDGE_CURVE('',#14671,#14648,#14673,.T.);+#14671 = VERTEX_POINT('',#14672);+#14672 = CARTESIAN_POINT('',(-0.596313534691,0.116995210193,1.015));+#14673 = SURFACE_CURVE('',#14674,(#14678,#14685),.PCURVE_S1.);+#14674 = LINE('',#14675,#14676);+#14675 = CARTESIAN_POINT('',(-0.596313534691,0.116995210193,1.015));+#14676 = VECTOR('',#14677,1.);+#14677 = DIRECTION('',(-0.,-0.,-1.));+#14678 = PCURVE('',#14610,#14679);+#14679 = DEFINITIONAL_REPRESENTATION('',(#14680),#14684);+#14680 = LINE('',#14681,#14682);+#14681 = CARTESIAN_POINT('',(3.239281063988E-02,0.));+#14682 = VECTOR('',#14683,1.);+#14683 = DIRECTION('',(0.,-1.));+#14684 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14685 = PCURVE('',#14686,#14691);+#14686 = PLANE('',#14687);+#14687 = AXIS2_PLACEMENT_3D('',#14688,#14689,#14690);+#14688 = CARTESIAN_POINT('',(-0.596313534691,0.116995210193,1.015));+#14689 = DIRECTION('',(0.,1.,0.));+#14690 = DIRECTION('',(-1.,0.,0.));+#14691 = DEFINITIONAL_REPRESENTATION('',(#14692),#14696);+#14692 = LINE('',#14693,#14694);+#14693 = CARTESIAN_POINT('',(0.,0.));+#14694 = VECTOR('',#14695,1.);+#14695 = DIRECTION('',(0.,-1.));+#14696 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14697 = ORIENTED_EDGE('',*,*,#14698,.F.);+#14698 = EDGE_CURVE('',#14595,#14671,#14699,.T.);+#14699 = SURFACE_CURVE('',#14700,(#14704,#14711),.PCURVE_S1.);+#14700 = LINE('',#14701,#14702);+#14701 = CARTESIAN_POINT('',(-0.596313534691,0.149388020833,1.015));+#14702 = VECTOR('',#14703,1.);+#14703 = DIRECTION('',(0.,-1.,0.));+#14704 = PCURVE('',#14610,#14705);+#14705 = DEFINITIONAL_REPRESENTATION('',(#14706),#14710);+#14706 = LINE('',#14707,#14708);+#14707 = CARTESIAN_POINT('',(0.,0.));+#14708 = VECTOR('',#14709,1.);+#14709 = DIRECTION('',(1.,0.));+#14710 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14711 = PCURVE('',#14555,#14712);+#14712 = DEFINITIONAL_REPRESENTATION('',(#14713),#14717);+#14713 = LINE('',#14714,#14715);+#14714 = CARTESIAN_POINT('',(0.225987490699,0.284485095796));+#14715 = VECTOR('',#14716,1.);+#14716 = DIRECTION('',(0.,-1.));+#14717 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14718 = ADVANCED_FACE('',(#14719),#14686,.F.);+#14719 = FACE_BOUND('',#14720,.F.);+#14720 = EDGE_LOOP('',(#14721,#14722,#14745,#14773));+#14721 = ORIENTED_EDGE('',*,*,#14670,.T.);+#14722 = ORIENTED_EDGE('',*,*,#14723,.T.);+#14723 = EDGE_CURVE('',#14648,#14724,#14726,.T.);+#14724 = VERTEX_POINT('',#14725);+#14725 = CARTESIAN_POINT('',(-0.685298490978,0.116995210193,0.975));+#14726 = SURFACE_CURVE('',#14727,(#14731,#14738),.PCURVE_S1.);+#14727 = LINE('',#14728,#14729);+#14728 = CARTESIAN_POINT('',(-0.596313534691,0.116995210193,0.975));+#14729 = VECTOR('',#14730,1.);+#14730 = DIRECTION('',(-1.,0.,0.));+#14731 = PCURVE('',#14686,#14732);+#14732 = DEFINITIONAL_REPRESENTATION('',(#14733),#14737);+#14733 = LINE('',#14734,#14735);+#14734 = CARTESIAN_POINT('',(0.,-4.E-02));+#14735 = VECTOR('',#14736,1.);+#14736 = DIRECTION('',(1.,0.));+#14737 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14738 = PCURVE('',#14501,#14739);+#14739 = DEFINITIONAL_REPRESENTATION('',(#14740),#14744);+#14740 = LINE('',#14741,#14742);+#14741 = CARTESIAN_POINT('',(0.225987490699,0.252092285156));+#14742 = VECTOR('',#14743,1.);+#14743 = DIRECTION('',(-1.,0.));+#14744 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14745 = ORIENTED_EDGE('',*,*,#14746,.F.);+#14746 = EDGE_CURVE('',#14747,#14724,#14749,.T.);+#14747 = VERTEX_POINT('',#14748);+#14748 = CARTESIAN_POINT('',(-0.685298490978,0.116995210193,1.015));+#14749 = SURFACE_CURVE('',#14750,(#14754,#14761),.PCURVE_S1.);+#14750 = LINE('',#14751,#14752);+#14751 = CARTESIAN_POINT('',(-0.685298490978,0.116995210193,1.015));+#14752 = VECTOR('',#14753,1.);+#14753 = DIRECTION('',(-0.,-0.,-1.));+#14754 = PCURVE('',#14686,#14755);+#14755 = DEFINITIONAL_REPRESENTATION('',(#14756),#14760);+#14756 = LINE('',#14757,#14758);+#14757 = CARTESIAN_POINT('',(8.89849562872E-02,0.));+#14758 = VECTOR('',#14759,1.);+#14759 = DIRECTION('',(0.,-1.));+#14760 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14761 = PCURVE('',#14762,#14767);+#14762 = PLANE('',#14763);+#14763 = AXIS2_PLACEMENT_3D('',#14764,#14765,#14766);+#14764 = CARTESIAN_POINT('',(-0.685298490978,0.116995210193,1.015));+#14765 = DIRECTION('',(-1.,0.,0.));+#14766 = DIRECTION('',(0.,-1.,0.));+#14767 = DEFINITIONAL_REPRESENTATION('',(#14768),#14772);+#14768 = LINE('',#14769,#14770);+#14769 = CARTESIAN_POINT('',(0.,0.));+#14770 = VECTOR('',#14771,1.);+#14771 = DIRECTION('',(0.,-1.));+#14772 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14773 = ORIENTED_EDGE('',*,*,#14774,.F.);+#14774 = EDGE_CURVE('',#14671,#14747,#14775,.T.);+#14775 = SURFACE_CURVE('',#14776,(#14780,#14787),.PCURVE_S1.);+#14776 = LINE('',#14777,#14778);+#14777 = CARTESIAN_POINT('',(-0.596313534691,0.116995210193,1.015));+#14778 = VECTOR('',#14779,1.);+#14779 = DIRECTION('',(-1.,0.,0.));+#14780 = PCURVE('',#14686,#14781);+#14781 = DEFINITIONAL_REPRESENTATION('',(#14782),#14786);+#14782 = LINE('',#14783,#14784);+#14783 = CARTESIAN_POINT('',(0.,0.));+#14784 = VECTOR('',#14785,1.);+#14785 = DIRECTION('',(1.,0.));+#14786 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14787 = PCURVE('',#14555,#14788);+#14788 = DEFINITIONAL_REPRESENTATION('',(#14789),#14793);+#14789 = LINE('',#14790,#14791);+#14790 = CARTESIAN_POINT('',(0.225987490699,0.252092285156));+#14791 = VECTOR('',#14792,1.);+#14792 = DIRECTION('',(-1.,0.));+#14793 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14794 = ADVANCED_FACE('',(#14795),#14762,.F.);+#14795 = FACE_BOUND('',#14796,.F.);+#14796 = EDGE_LOOP('',(#14797,#14798,#14821,#14849));+#14797 = ORIENTED_EDGE('',*,*,#14746,.T.);+#14798 = ORIENTED_EDGE('',*,*,#14799,.T.);+#14799 = EDGE_CURVE('',#14724,#14800,#14802,.T.);+#14800 = VERTEX_POINT('',#14801);+#14801 = CARTESIAN_POINT('',(-0.685298490978,-0.135097074963,0.975));+#14802 = SURFACE_CURVE('',#14803,(#14807,#14814),.PCURVE_S1.);+#14803 = LINE('',#14804,#14805);+#14804 = CARTESIAN_POINT('',(-0.685298490978,0.116995210193,0.975));+#14805 = VECTOR('',#14806,1.);+#14806 = DIRECTION('',(0.,-1.,0.));+#14807 = PCURVE('',#14762,#14808);+#14808 = DEFINITIONAL_REPRESENTATION('',(#14809),#14813);+#14809 = LINE('',#14810,#14811);+#14810 = CARTESIAN_POINT('',(0.,-4.E-02));+#14811 = VECTOR('',#14812,1.);+#14812 = DIRECTION('',(1.,0.));+#14813 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14814 = PCURVE('',#14501,#14815);+#14815 = DEFINITIONAL_REPRESENTATION('',(#14816),#14820);+#14816 = LINE('',#14817,#14818);+#14817 = CARTESIAN_POINT('',(0.137002534412,0.252092285156));+#14818 = VECTOR('',#14819,1.);+#14819 = DIRECTION('',(0.,-1.));+#14820 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14821 = ORIENTED_EDGE('',*,*,#14822,.F.);+#14822 = EDGE_CURVE('',#14823,#14800,#14825,.T.);+#14823 = VERTEX_POINT('',#14824);+#14824 = CARTESIAN_POINT('',(-0.685298490978,-0.135097074963,1.015));+#14825 = SURFACE_CURVE('',#14826,(#14830,#14837),.PCURVE_S1.);+#14826 = LINE('',#14827,#14828);+#14827 = CARTESIAN_POINT('',(-0.685298490978,-0.135097074963,1.015));+#14828 = VECTOR('',#14829,1.);+#14829 = DIRECTION('',(-0.,-0.,-1.));+#14830 = PCURVE('',#14762,#14831);+#14831 = DEFINITIONAL_REPRESENTATION('',(#14832),#14836);+#14832 = LINE('',#14833,#14834);+#14833 = CARTESIAN_POINT('',(0.252092285156,0.));+#14834 = VECTOR('',#14835,1.);+#14835 = DIRECTION('',(0.,-1.));+#14836 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14837 = PCURVE('',#14838,#14843);+#14838 = PLANE('',#14839);+#14839 = AXIS2_PLACEMENT_3D('',#14840,#14841,#14842);+#14840 = CARTESIAN_POINT('',(-0.685298490978,-0.135097074963,1.015));+#14841 = DIRECTION('',(0.,1.,0.));+#14842 = DIRECTION('',(-1.,0.,0.));+#14843 = DEFINITIONAL_REPRESENTATION('',(#14844),#14848);+#14844 = LINE('',#14845,#14846);+#14845 = CARTESIAN_POINT('',(0.,0.));+#14846 = VECTOR('',#14847,1.);+#14847 = DIRECTION('',(0.,-1.));+#14848 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14849 = ORIENTED_EDGE('',*,*,#14850,.F.);+#14850 = EDGE_CURVE('',#14747,#14823,#14851,.T.);+#14851 = SURFACE_CURVE('',#14852,(#14856,#14863),.PCURVE_S1.);+#14852 = LINE('',#14853,#14854);+#14853 = CARTESIAN_POINT('',(-0.685298490978,0.116995210193,1.015));+#14854 = VECTOR('',#14855,1.);+#14855 = DIRECTION('',(0.,-1.,0.));+#14856 = PCURVE('',#14762,#14857);+#14857 = DEFINITIONAL_REPRESENTATION('',(#14858),#14862);+#14858 = LINE('',#14859,#14860);+#14859 = CARTESIAN_POINT('',(0.,0.));+#14860 = VECTOR('',#14861,1.);+#14861 = DIRECTION('',(1.,0.));+#14862 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14863 = PCURVE('',#14555,#14864);+#14864 = DEFINITIONAL_REPRESENTATION('',(#14865),#14869);+#14865 = LINE('',#14866,#14867);+#14866 = CARTESIAN_POINT('',(0.137002534412,0.252092285156));+#14867 = VECTOR('',#14868,1.);+#14868 = DIRECTION('',(0.,-1.));+#14869 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14870 = ADVANCED_FACE('',(#14871),#14838,.F.);+#14871 = FACE_BOUND('',#14872,.F.);+#14872 = EDGE_LOOP('',(#14873,#14874,#14897,#14925));+#14873 = ORIENTED_EDGE('',*,*,#14822,.T.);+#14874 = ORIENTED_EDGE('',*,*,#14875,.T.);+#14875 = EDGE_CURVE('',#14800,#14876,#14878,.T.);+#14876 = VERTEX_POINT('',#14877);+#14877 = CARTESIAN_POINT('',(-0.723979317801,-0.135097074963,0.975));+#14878 = SURFACE_CURVE('',#14879,(#14883,#14890),.PCURVE_S1.);+#14879 = LINE('',#14880,#14881);+#14880 = CARTESIAN_POINT('',(-0.685298490978,-0.135097074963,0.975));+#14881 = VECTOR('',#14882,1.);+#14882 = DIRECTION('',(-1.,0.,0.));+#14883 = PCURVE('',#14838,#14884);+#14884 = DEFINITIONAL_REPRESENTATION('',(#14885),#14889);+#14885 = LINE('',#14886,#14887);+#14886 = CARTESIAN_POINT('',(0.,-4.E-02));+#14887 = VECTOR('',#14888,1.);+#14888 = DIRECTION('',(1.,0.));+#14889 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14890 = PCURVE('',#14501,#14891);+#14891 = DEFINITIONAL_REPRESENTATION('',(#14892),#14896);+#14892 = LINE('',#14893,#14894);+#14893 = CARTESIAN_POINT('',(0.137002534412,0.));+#14894 = VECTOR('',#14895,1.);+#14895 = DIRECTION('',(-1.,0.));+#14896 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14897 = ORIENTED_EDGE('',*,*,#14898,.F.);+#14898 = EDGE_CURVE('',#14899,#14876,#14901,.T.);+#14899 = VERTEX_POINT('',#14900);+#14900 = CARTESIAN_POINT('',(-0.723979317801,-0.135097074963,1.015));+#14901 = SURFACE_CURVE('',#14902,(#14906,#14913),.PCURVE_S1.);+#14902 = LINE('',#14903,#14904);+#14903 = CARTESIAN_POINT('',(-0.723979317801,-0.135097074963,1.015));+#14904 = VECTOR('',#14905,1.);+#14905 = DIRECTION('',(-0.,-0.,-1.));+#14906 = PCURVE('',#14838,#14907);+#14907 = DEFINITIONAL_REPRESENTATION('',(#14908),#14912);+#14908 = LINE('',#14909,#14910);+#14909 = CARTESIAN_POINT('',(3.868082682292E-02,0.));+#14910 = VECTOR('',#14911,1.);+#14911 = DIRECTION('',(0.,-1.));+#14912 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14913 = PCURVE('',#14914,#14919);+#14914 = PLANE('',#14915);+#14915 = AXIS2_PLACEMENT_3D('',#14916,#14917,#14918);+#14916 = CARTESIAN_POINT('',(-0.723979317801,-0.135097074963,1.015));+#14917 = DIRECTION('',(1.,0.,0.));+#14918 = DIRECTION('',(0.,1.,0.));+#14919 = DEFINITIONAL_REPRESENTATION('',(#14920),#14924);+#14920 = LINE('',#14921,#14922);+#14921 = CARTESIAN_POINT('',(0.,0.));+#14922 = VECTOR('',#14923,1.);+#14923 = DIRECTION('',(0.,-1.));+#14924 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14925 = ORIENTED_EDGE('',*,*,#14926,.F.);+#14926 = EDGE_CURVE('',#14823,#14899,#14927,.T.);+#14927 = SURFACE_CURVE('',#14928,(#14932,#14939),.PCURVE_S1.);+#14928 = LINE('',#14929,#14930);+#14929 = CARTESIAN_POINT('',(-0.685298490978,-0.135097074963,1.015));+#14930 = VECTOR('',#14931,1.);+#14931 = DIRECTION('',(-1.,0.,0.));+#14932 = PCURVE('',#14838,#14933);+#14933 = DEFINITIONAL_REPRESENTATION('',(#14934),#14938);+#14934 = LINE('',#14935,#14936);+#14935 = CARTESIAN_POINT('',(0.,0.));+#14936 = VECTOR('',#14937,1.);+#14937 = DIRECTION('',(1.,0.));+#14938 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14939 = PCURVE('',#14555,#14940);+#14940 = DEFINITIONAL_REPRESENTATION('',(#14941),#14945);+#14941 = LINE('',#14942,#14943);+#14942 = CARTESIAN_POINT('',(0.137002534412,0.));+#14943 = VECTOR('',#14944,1.);+#14944 = DIRECTION('',(-1.,0.));+#14945 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14946 = ADVANCED_FACE('',(#14947),#14914,.F.);+#14947 = FACE_BOUND('',#14948,.F.);+#14948 = EDGE_LOOP('',(#14949,#14950,#14973,#14996));+#14949 = ORIENTED_EDGE('',*,*,#14898,.T.);+#14950 = ORIENTED_EDGE('',*,*,#14951,.T.);+#14951 = EDGE_CURVE('',#14876,#14952,#14954,.T.);+#14952 = VERTEX_POINT('',#14953);+#14953 = CARTESIAN_POINT('',(-0.723979317801,0.116995210193,0.975));+#14954 = SURFACE_CURVE('',#14955,(#14959,#14966),.PCURVE_S1.);+#14955 = LINE('',#14956,#14957);+#14956 = CARTESIAN_POINT('',(-0.723979317801,-0.135097074963,0.975));+#14957 = VECTOR('',#14958,1.);+#14958 = DIRECTION('',(0.,1.,0.));+#14959 = PCURVE('',#14914,#14960);+#14960 = DEFINITIONAL_REPRESENTATION('',(#14961),#14965);+#14961 = LINE('',#14962,#14963);+#14962 = CARTESIAN_POINT('',(0.,-4.E-02));+#14963 = VECTOR('',#14964,1.);+#14964 = DIRECTION('',(1.,0.));+#14965 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14966 = PCURVE('',#14501,#14967);+#14967 = DEFINITIONAL_REPRESENTATION('',(#14968),#14972);+#14968 = LINE('',#14969,#14970);+#14969 = CARTESIAN_POINT('',(9.832170758929E-02,0.));+#14970 = VECTOR('',#14971,1.);+#14971 = DIRECTION('',(0.,1.));+#14972 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14973 = ORIENTED_EDGE('',*,*,#14974,.F.);+#14974 = EDGE_CURVE('',#14975,#14952,#14977,.T.);+#14975 = VERTEX_POINT('',#14976);+#14976 = CARTESIAN_POINT('',(-0.723979317801,0.116995210193,1.015));+#14977 = SURFACE_CURVE('',#14978,(#14982,#14989),.PCURVE_S1.);+#14978 = LINE('',#14979,#14980);+#14979 = CARTESIAN_POINT('',(-0.723979317801,0.116995210193,1.015));+#14980 = VECTOR('',#14981,1.);+#14981 = DIRECTION('',(-0.,-0.,-1.));+#14982 = PCURVE('',#14914,#14983);+#14983 = DEFINITIONAL_REPRESENTATION('',(#14984),#14988);+#14984 = LINE('',#14985,#14986);+#14985 = CARTESIAN_POINT('',(0.252092285156,0.));+#14986 = VECTOR('',#14987,1.);+#14987 = DIRECTION('',(0.,-1.));+#14988 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14989 = PCURVE('',#14473,#14990);+#14990 = DEFINITIONAL_REPRESENTATION('',(#14991),#14995);+#14991 = LINE('',#14992,#14993);+#14992 = CARTESIAN_POINT('',(0.,0.));+#14993 = VECTOR('',#14994,1.);+#14994 = DIRECTION('',(0.,-1.));+#14995 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14996 = ORIENTED_EDGE('',*,*,#14997,.F.);+#14997 = EDGE_CURVE('',#14899,#14975,#14998,.T.);+#14998 = SURFACE_CURVE('',#14999,(#15003,#15010),.PCURVE_S1.);+#14999 = LINE('',#15000,#15001);+#15000 = CARTESIAN_POINT('',(-0.723979317801,-0.135097074963,1.015));+#15001 = VECTOR('',#15002,1.);+#15002 = DIRECTION('',(0.,1.,0.));+#15003 = PCURVE('',#14914,#15004);+#15004 = DEFINITIONAL_REPRESENTATION('',(#15005),#15009);+#15005 = LINE('',#15006,#15007);+#15006 = CARTESIAN_POINT('',(0.,0.));+#15007 = VECTOR('',#15008,1.);+#15008 = DIRECTION('',(1.,0.));+#15009 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15010 = PCURVE('',#14555,#15011);+#15011 = DEFINITIONAL_REPRESENTATION('',(#15012),#15016);+#15012 = LINE('',#15013,#15014);+#15013 = CARTESIAN_POINT('',(9.832170758929E-02,0.));+#15014 = VECTOR('',#15015,1.);+#15015 = DIRECTION('',(0.,1.));+#15016 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15017 = ADVANCED_FACE('',(#15018),#14473,.F.);+#15018 = FACE_BOUND('',#15019,.F.);+#15019 = EDGE_LOOP('',(#15020,#15021,#15042,#15043));+#15020 = ORIENTED_EDGE('',*,*,#14974,.T.);+#15021 = ORIENTED_EDGE('',*,*,#15022,.T.);+#15022 = EDGE_CURVE('',#14952,#14453,#15023,.T.);+#15023 = SURFACE_CURVE('',#15024,(#15028,#15035),.PCURVE_S1.);+#15024 = LINE('',#15025,#15026);+#15025 = CARTESIAN_POINT('',(-0.723979317801,0.116995210193,0.975));+#15026 = VECTOR('',#15027,1.);+#15027 = DIRECTION('',(-1.,0.,0.));+#15028 = PCURVE('',#14473,#15029);+#15029 = DEFINITIONAL_REPRESENTATION('',(#15030),#15034);+#15030 = LINE('',#15031,#15032);+#15031 = CARTESIAN_POINT('',(0.,-4.E-02));+#15032 = VECTOR('',#15033,1.);+#15033 = DIRECTION('',(1.,0.));+#15034 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15035 = PCURVE('',#14501,#15036);+#15036 = DEFINITIONAL_REPRESENTATION('',(#15037),#15041);+#15037 = LINE('',#15038,#15039);+#15038 = CARTESIAN_POINT('',(9.832170758929E-02,0.252092285156));+#15039 = VECTOR('',#15040,1.);+#15040 = DIRECTION('',(-1.,0.));+#15041 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15042 = ORIENTED_EDGE('',*,*,#14450,.F.);+#15043 = ORIENTED_EDGE('',*,*,#15044,.F.);+#15044 = EDGE_CURVE('',#14975,#14451,#15045,.T.);+#15045 = SURFACE_CURVE('',#15046,(#15050,#15057),.PCURVE_S1.);+#15046 = LINE('',#15047,#15048);+#15047 = CARTESIAN_POINT('',(-0.723979317801,0.116995210193,1.015));+#15048 = VECTOR('',#15049,1.);+#15049 = DIRECTION('',(-1.,0.,0.));+#15050 = PCURVE('',#14473,#15051);+#15051 = DEFINITIONAL_REPRESENTATION('',(#15052),#15056);+#15052 = LINE('',#15053,#15054);+#15053 = CARTESIAN_POINT('',(0.,0.));+#15054 = VECTOR('',#15055,1.);+#15055 = DIRECTION('',(1.,0.));+#15056 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15057 = PCURVE('',#14555,#15058);+#15058 = DEFINITIONAL_REPRESENTATION('',(#15059),#15063);+#15059 = LINE('',#15060,#15061);+#15060 = CARTESIAN_POINT('',(9.832170758929E-02,0.252092285156));+#15061 = VECTOR('',#15062,1.);+#15062 = DIRECTION('',(-1.,0.));+#15063 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15064 = ADVANCED_FACE('',(#15065),#14555,.T.);+#15065 = FACE_BOUND('',#15066,.F.);+#15066 = EDGE_LOOP('',(#15067,#15068,#15069,#15070,#15071,#15072,#15073,+ #15074));+#15067 = ORIENTED_EDGE('',*,*,#14541,.T.);+#15068 = ORIENTED_EDGE('',*,*,#14622,.T.);+#15069 = ORIENTED_EDGE('',*,*,#14698,.T.);+#15070 = ORIENTED_EDGE('',*,*,#14774,.T.);+#15071 = ORIENTED_EDGE('',*,*,#14850,.T.);+#15072 = ORIENTED_EDGE('',*,*,#14926,.T.);+#15073 = ORIENTED_EDGE('',*,*,#14997,.T.);+#15074 = ORIENTED_EDGE('',*,*,#15044,.T.);+#15075 = ADVANCED_FACE('',(#15076),#14501,.F.);+#15076 = FACE_BOUND('',#15077,.T.);+#15077 = EDGE_LOOP('',(#15078,#15079,#15080,#15081,#15082,#15083,#15084,+ #15085));+#15078 = ORIENTED_EDGE('',*,*,#14485,.T.);+#15079 = ORIENTED_EDGE('',*,*,#14571,.T.);+#15080 = ORIENTED_EDGE('',*,*,#14647,.T.);+#15081 = ORIENTED_EDGE('',*,*,#14723,.T.);+#15082 = ORIENTED_EDGE('',*,*,#14799,.T.);+#15083 = ORIENTED_EDGE('',*,*,#14875,.T.);+#15084 = ORIENTED_EDGE('',*,*,#14951,.T.);+#15085 = ORIENTED_EDGE('',*,*,#15022,.T.);+#15086 = MANIFOLD_SOLID_BREP('',#15087);+#15087 = CLOSED_SHELL('',(#15088,#15208,#15286,#15364,#15442,#15520,+ #15596,#15672,#15743,#15790,#15902,#15978,#16056,#16134,#16212,+ #16283,#16330,#16351));+#15088 = ADVANCED_FACE('',(#15089),#15103,.F.);+#15089 = FACE_BOUND('',#15090,.F.);+#15090 = EDGE_LOOP('',(#15091,#15126,#15154,#15182));+#15091 = ORIENTED_EDGE('',*,*,#15092,.T.);+#15092 = EDGE_CURVE('',#15093,#15095,#15097,.T.);+#15093 = VERTEX_POINT('',#15094);+#15094 = CARTESIAN_POINT('',(-0.549820324126,-0.135097074963,1.015));+#15095 = VERTEX_POINT('',#15096);+#15096 = CARTESIAN_POINT('',(-0.549820324126,-0.135097074963,0.975));+#15097 = SURFACE_CURVE('',#15098,(#15102,#15114),.PCURVE_S1.);+#15098 = LINE('',#15099,#15100);+#15099 = CARTESIAN_POINT('',(-0.549820324126,-0.135097074963,1.015));+#15100 = VECTOR('',#15101,1.);+#15101 = DIRECTION('',(-0.,-0.,-1.));+#15102 = PCURVE('',#15103,#15108);+#15103 = PLANE('',#15104);+#15104 = AXIS2_PLACEMENT_3D('',#15105,#15106,#15107);+#15105 = CARTESIAN_POINT('',(-0.549820324126,-0.135097074963,1.015));+#15106 = DIRECTION('',(1.,0.,0.));+#15107 = DIRECTION('',(0.,1.,0.));+#15108 = DEFINITIONAL_REPRESENTATION('',(#15109),#15113);+#15109 = LINE('',#15110,#15111);+#15110 = CARTESIAN_POINT('',(0.,0.));+#15111 = VECTOR('',#15112,1.);+#15112 = DIRECTION('',(0.,-1.));+#15113 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15114 = PCURVE('',#15115,#15120);+#15115 = PLANE('',#15116);+#15116 = AXIS2_PLACEMENT_3D('',#15117,#15118,#15119);+#15117 = CARTESIAN_POINT('',(-0.511330043248,-0.135097074963,1.015));+#15118 = DIRECTION('',(0.,1.,0.));+#15119 = DIRECTION('',(-1.,0.,0.));+#15120 = DEFINITIONAL_REPRESENTATION('',(#15121),#15125);+#15121 = LINE('',#15122,#15123);+#15122 = CARTESIAN_POINT('',(3.849028087798E-02,0.));+#15123 = VECTOR('',#15124,1.);+#15124 = DIRECTION('',(0.,-1.));+#15125 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15126 = ORIENTED_EDGE('',*,*,#15127,.T.);+#15127 = EDGE_CURVE('',#15095,#15128,#15130,.T.);+#15128 = VERTEX_POINT('',#15129);+#15129 = CARTESIAN_POINT('',(-0.549820324126,0.149388020833,0.975));+#15130 = SURFACE_CURVE('',#15131,(#15135,#15142),.PCURVE_S1.);+#15131 = LINE('',#15132,#15133);+#15132 = CARTESIAN_POINT('',(-0.549820324126,-0.135097074963,0.975));+#15133 = VECTOR('',#15134,1.);+#15134 = DIRECTION('',(0.,1.,0.));+#15135 = PCURVE('',#15103,#15136);+#15136 = DEFINITIONAL_REPRESENTATION('',(#15137),#15141);+#15137 = LINE('',#15138,#15139);+#15138 = CARTESIAN_POINT('',(0.,-4.E-02));+#15139 = VECTOR('',#15140,1.);+#15140 = DIRECTION('',(1.,0.));+#15141 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15142 = PCURVE('',#15143,#15148);+#15143 = PLANE('',#15144);+#15144 = AXIS2_PLACEMENT_3D('',#15145,#15146,#15147);+#15145 = CARTESIAN_POINT('',(-0.587357875279,-0.135097074963,0.975));+#15146 = DIRECTION('',(0.,0.,1.));+#15147 = DIRECTION('',(1.,0.,0.));+#15148 = DEFINITIONAL_REPRESENTATION('',(#15149),#15153);+#15149 = LINE('',#15150,#15151);+#15150 = CARTESIAN_POINT('',(3.753755115327E-02,0.));+#15151 = VECTOR('',#15152,1.);+#15152 = DIRECTION('',(0.,1.));+#15153 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15154 = ORIENTED_EDGE('',*,*,#15155,.F.);+#15155 = EDGE_CURVE('',#15156,#15128,#15158,.T.);+#15156 = VERTEX_POINT('',#15157);+#15157 = CARTESIAN_POINT('',(-0.549820324126,0.149388020833,1.015));+#15158 = SURFACE_CURVE('',#15159,(#15163,#15170),.PCURVE_S1.);+#15159 = LINE('',#15160,#15161);+#15160 = CARTESIAN_POINT('',(-0.549820324126,0.149388020833,1.015));+#15161 = VECTOR('',#15162,1.);+#15162 = DIRECTION('',(-0.,-0.,-1.));+#15163 = PCURVE('',#15103,#15164);+#15164 = DEFINITIONAL_REPRESENTATION('',(#15165),#15169);+#15165 = LINE('',#15166,#15167);+#15166 = CARTESIAN_POINT('',(0.284485095796,0.));+#15167 = VECTOR('',#15168,1.);+#15168 = DIRECTION('',(0.,-1.));+#15169 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15170 = PCURVE('',#15171,#15176);+#15171 = PLANE('',#15172);+#15172 = AXIS2_PLACEMENT_3D('',#15173,#15174,#15175);+#15173 = CARTESIAN_POINT('',(-0.549820324126,0.149388020833,1.015));+#15174 = DIRECTION('',(0.,-1.,0.));+#15175 = DIRECTION('',(1.,0.,0.));+#15176 = DEFINITIONAL_REPRESENTATION('',(#15177),#15181);+#15177 = LINE('',#15178,#15179);+#15178 = CARTESIAN_POINT('',(0.,0.));+#15179 = VECTOR('',#15180,1.);+#15180 = DIRECTION('',(0.,-1.));+#15181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15182 = ORIENTED_EDGE('',*,*,#15183,.F.);+#15183 = EDGE_CURVE('',#15093,#15156,#15184,.T.);+#15184 = SURFACE_CURVE('',#15185,(#15189,#15196),.PCURVE_S1.);+#15185 = LINE('',#15186,#15187);+#15186 = CARTESIAN_POINT('',(-0.549820324126,-0.135097074963,1.015));+#15187 = VECTOR('',#15188,1.);+#15188 = DIRECTION('',(0.,1.,0.));+#15189 = PCURVE('',#15103,#15190);+#15190 = DEFINITIONAL_REPRESENTATION('',(#15191),#15195);+#15191 = LINE('',#15192,#15193);+#15192 = CARTESIAN_POINT('',(0.,0.));+#15193 = VECTOR('',#15194,1.);+#15194 = DIRECTION('',(1.,0.));+#15195 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15196 = PCURVE('',#15197,#15202);+#15197 = PLANE('',#15198);+#15198 = AXIS2_PLACEMENT_3D('',#15199,#15200,#15201);+#15199 = CARTESIAN_POINT('',(-0.587357875279,-0.135097074963,1.015));+#15200 = DIRECTION('',(0.,0.,1.));+#15201 = DIRECTION('',(1.,0.,0.));+#15202 = DEFINITIONAL_REPRESENTATION('',(#15203),#15207);+#15203 = LINE('',#15204,#15205);+#15204 = CARTESIAN_POINT('',(3.753755115327E-02,0.));+#15205 = VECTOR('',#15206,1.);+#15206 = DIRECTION('',(0.,1.));+#15207 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15208 = ADVANCED_FACE('',(#15209),#15171,.F.);+#15209 = FACE_BOUND('',#15210,.F.);+#15210 = EDGE_LOOP('',(#15211,#15212,#15235,#15265));+#15211 = ORIENTED_EDGE('',*,*,#15155,.T.);+#15212 = ORIENTED_EDGE('',*,*,#15213,.T.);+#15213 = EDGE_CURVE('',#15128,#15214,#15216,.T.);+#15214 = VERTEX_POINT('',#15215);+#15215 = CARTESIAN_POINT('',(-0.466742292132,0.149388020833,0.975));+#15216 = SURFACE_CURVE('',#15217,(#15221,#15228),.PCURVE_S1.);+#15217 = LINE('',#15218,#15219);+#15218 = CARTESIAN_POINT('',(-0.549820324126,0.149388020833,0.975));+#15219 = VECTOR('',#15220,1.);+#15220 = DIRECTION('',(1.,0.,0.));+#15221 = PCURVE('',#15171,#15222);+#15222 = DEFINITIONAL_REPRESENTATION('',(#15223),#15227);+#15223 = LINE('',#15224,#15225);+#15224 = CARTESIAN_POINT('',(0.,-4.E-02));+#15225 = VECTOR('',#15226,1.);+#15226 = DIRECTION('',(1.,0.));+#15227 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15228 = PCURVE('',#15143,#15229);+#15229 = DEFINITIONAL_REPRESENTATION('',(#15230),#15234);+#15230 = LINE('',#15231,#15232);+#15231 = CARTESIAN_POINT('',(3.753755115327E-02,0.284485095796));+#15232 = VECTOR('',#15233,1.);+#15233 = DIRECTION('',(1.,0.));+#15234 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15235 = ORIENTED_EDGE('',*,*,#15236,.F.);+#15236 = EDGE_CURVE('',#15237,#15214,#15239,.T.);+#15237 = VERTEX_POINT('',#15238);+#15238 = CARTESIAN_POINT('',(-0.466742292132,0.149388020833,1.015));+#15239 = SURFACE_CURVE('',#15240,(#15244,#15251),.PCURVE_S1.);+#15240 = LINE('',#15241,#15242);+#15241 = CARTESIAN_POINT('',(-0.466742292132,0.149388020833,1.015));+#15242 = VECTOR('',#15243,1.);+#15243 = DIRECTION('',(-0.,-0.,-1.));+#15244 = PCURVE('',#15171,#15245);+#15245 = DEFINITIONAL_REPRESENTATION('',(#15246),#15250);+#15246 = LINE('',#15247,#15248);+#15247 = CARTESIAN_POINT('',(8.307803199405E-02,0.));+#15248 = VECTOR('',#15249,1.);+#15249 = DIRECTION('',(0.,-1.));+#15250 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15251 = PCURVE('',#15252,#15259);+#15252 = SURFACE_OF_LINEAR_EXTRUSION('',#15253,#15257);+#15253 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15254,#15255,#15256),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15254 = CARTESIAN_POINT('',(-0.466742292132,0.149388020833,1.015));+#15255 = CARTESIAN_POINT('',(-0.419105805897,0.149388020833,1.015));+#15256 = CARTESIAN_POINT('',(-0.394525378999,0.127761056083,1.015));+#15257 = VECTOR('',#15258,1.);+#15258 = DIRECTION('',(0.,0.,1.));+#15259 = DEFINITIONAL_REPRESENTATION('',(#15260),#15264);+#15260 = LINE('',#15261,#15262);+#15261 = CARTESIAN_POINT('',(0.,0.));+#15262 = VECTOR('',#15263,1.);+#15263 = DIRECTION('',(0.,-1.));+#15264 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15265 = ORIENTED_EDGE('',*,*,#15266,.F.);+#15266 = EDGE_CURVE('',#15156,#15237,#15267,.T.);+#15267 = SURFACE_CURVE('',#15268,(#15272,#15279),.PCURVE_S1.);+#15268 = LINE('',#15269,#15270);+#15269 = CARTESIAN_POINT('',(-0.549820324126,0.149388020833,1.015));+#15270 = VECTOR('',#15271,1.);+#15271 = DIRECTION('',(1.,0.,0.));+#15272 = PCURVE('',#15171,#15273);+#15273 = DEFINITIONAL_REPRESENTATION('',(#15274),#15278);+#15274 = LINE('',#15275,#15276);+#15275 = CARTESIAN_POINT('',(0.,0.));+#15276 = VECTOR('',#15277,1.);+#15277 = DIRECTION('',(1.,0.));+#15278 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15279 = PCURVE('',#15197,#15280);+#15280 = DEFINITIONAL_REPRESENTATION('',(#15281),#15285);+#15281 = LINE('',#15282,#15283);+#15282 = CARTESIAN_POINT('',(3.753755115327E-02,0.284485095796));+#15283 = VECTOR('',#15284,1.);+#15284 = DIRECTION('',(1.,0.));+#15285 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15286 = ADVANCED_FACE('',(#15287),#15252,.F.);+#15287 = FACE_BOUND('',#15288,.F.);+#15288 = EDGE_LOOP('',(#15289,#15290,#15313,#15343));+#15289 = ORIENTED_EDGE('',*,*,#15236,.T.);+#15290 = ORIENTED_EDGE('',*,*,#15291,.T.);+#15291 = EDGE_CURVE('',#15214,#15292,#15294,.T.);+#15292 = VERTEX_POINT('',#15293);+#15293 = CARTESIAN_POINT('',(-0.394525378999,0.127761056083,0.975));+#15294 = SURFACE_CURVE('',#15295,(#15299,#15306),.PCURVE_S1.);+#15295 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15296,#15297,#15298),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15296 = CARTESIAN_POINT('',(-0.466742292132,0.149388020833,0.975));+#15297 = CARTESIAN_POINT('',(-0.419105805897,0.149388020833,0.975));+#15298 = CARTESIAN_POINT('',(-0.394525378999,0.127761056083,0.975));+#15299 = PCURVE('',#15252,#15300);+#15300 = DEFINITIONAL_REPRESENTATION('',(#15301),#15305);+#15301 = LINE('',#15302,#15303);+#15302 = CARTESIAN_POINT('',(0.,-4.E-02));+#15303 = VECTOR('',#15304,1.);+#15304 = DIRECTION('',(1.,0.));+#15305 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15306 = PCURVE('',#15143,#15307);+#15307 = DEFINITIONAL_REPRESENTATION('',(#15308),#15312);+#15308 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15309,#15310,#15311),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15309 = CARTESIAN_POINT('',(0.120615583147,0.284485095796));+#15310 = CARTESIAN_POINT('',(0.168252069382,0.284485095796));+#15311 = CARTESIAN_POINT('',(0.19283249628,0.262858131045));+#15312 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15313 = ORIENTED_EDGE('',*,*,#15314,.F.);+#15314 = EDGE_CURVE('',#15315,#15292,#15317,.T.);+#15315 = VERTEX_POINT('',#15316);+#15316 = CARTESIAN_POINT('',(-0.394525378999,0.127761056083,1.015));+#15317 = SURFACE_CURVE('',#15318,(#15322,#15329),.PCURVE_S1.);+#15318 = LINE('',#15319,#15320);+#15319 = CARTESIAN_POINT('',(-0.394525378999,0.127761056083,1.015));+#15320 = VECTOR('',#15321,1.);+#15321 = DIRECTION('',(-0.,-0.,-1.));+#15322 = PCURVE('',#15252,#15323);+#15323 = DEFINITIONAL_REPRESENTATION('',(#15324),#15328);+#15324 = LINE('',#15325,#15326);+#15325 = CARTESIAN_POINT('',(1.,0.));+#15326 = VECTOR('',#15327,1.);+#15327 = DIRECTION('',(0.,-1.));+#15328 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15329 = PCURVE('',#15330,#15337);+#15330 = SURFACE_OF_LINEAR_EXTRUSION('',#15331,#15335);+#15331 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15332,#15333,#15334),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15332 = CARTESIAN_POINT('',(-0.394525378999,0.127761056083,1.015));+#15333 = CARTESIAN_POINT('',(-0.369944952102,0.106134091332,1.015));+#15334 = CARTESIAN_POINT('',(-0.369944952102,6.440452938988E-02,1.015));+#15335 = VECTOR('',#15336,1.);+#15336 = DIRECTION('',(0.,0.,1.));+#15337 = DEFINITIONAL_REPRESENTATION('',(#15338),#15342);+#15338 = LINE('',#15339,#15340);+#15339 = CARTESIAN_POINT('',(0.,0.));+#15340 = VECTOR('',#15341,1.);+#15341 = DIRECTION('',(0.,-1.));+#15342 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15343 = ORIENTED_EDGE('',*,*,#15344,.F.);+#15344 = EDGE_CURVE('',#15237,#15315,#15345,.T.);+#15345 = SURFACE_CURVE('',#15346,(#15350,#15357),.PCURVE_S1.);+#15346 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15347,#15348,#15349),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15347 = CARTESIAN_POINT('',(-0.466742292132,0.149388020833,1.015));+#15348 = CARTESIAN_POINT('',(-0.419105805897,0.149388020833,1.015));+#15349 = CARTESIAN_POINT('',(-0.394525378999,0.127761056083,1.015));+#15350 = PCURVE('',#15252,#15351);+#15351 = DEFINITIONAL_REPRESENTATION('',(#15352),#15356);+#15352 = LINE('',#15353,#15354);+#15353 = CARTESIAN_POINT('',(0.,0.));+#15354 = VECTOR('',#15355,1.);+#15355 = DIRECTION('',(1.,0.));+#15356 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15357 = PCURVE('',#15197,#15358);+#15358 = DEFINITIONAL_REPRESENTATION('',(#15359),#15363);+#15359 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15360,#15361,#15362),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15360 = CARTESIAN_POINT('',(0.120615583147,0.284485095796));+#15361 = CARTESIAN_POINT('',(0.168252069382,0.284485095796));+#15362 = CARTESIAN_POINT('',(0.19283249628,0.262858131045));+#15363 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15364 = ADVANCED_FACE('',(#15365),#15330,.F.);+#15365 = FACE_BOUND('',#15366,.F.);+#15366 = EDGE_LOOP('',(#15367,#15368,#15391,#15421));+#15367 = ORIENTED_EDGE('',*,*,#15314,.T.);+#15368 = ORIENTED_EDGE('',*,*,#15369,.T.);+#15369 = EDGE_CURVE('',#15292,#15370,#15372,.T.);+#15370 = VERTEX_POINT('',#15371);+#15371 = CARTESIAN_POINT('',(-0.369944952102,6.440452938988E-02,0.975));+#15372 = SURFACE_CURVE('',#15373,(#15377,#15384),.PCURVE_S1.);+#15373 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15374,#15375,#15376),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15374 = CARTESIAN_POINT('',(-0.394525378999,0.127761056083,0.975));+#15375 = CARTESIAN_POINT('',(-0.369944952102,0.106134091332,0.975));+#15376 = CARTESIAN_POINT('',(-0.369944952102,6.440452938988E-02,0.975));+#15377 = PCURVE('',#15330,#15378);+#15378 = DEFINITIONAL_REPRESENTATION('',(#15379),#15383);+#15379 = LINE('',#15380,#15381);+#15380 = CARTESIAN_POINT('',(0.,-4.E-02));+#15381 = VECTOR('',#15382,1.);+#15382 = DIRECTION('',(1.,0.));+#15383 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15384 = PCURVE('',#15143,#15385);+#15385 = DEFINITIONAL_REPRESENTATION('',(#15386),#15390);+#15386 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15387,#15388,#15389),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15387 = CARTESIAN_POINT('',(0.19283249628,0.262858131045));+#15388 = CARTESIAN_POINT('',(0.217412923177,0.241231166295));+#15389 = CARTESIAN_POINT('',(0.217412923177,0.199501604353));+#15390 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15391 = ORIENTED_EDGE('',*,*,#15392,.F.);+#15392 = EDGE_CURVE('',#15393,#15370,#15395,.T.);+#15393 = VERTEX_POINT('',#15394);+#15394 = CARTESIAN_POINT('',(-0.369944952102,6.440452938988E-02,1.015));+#15395 = SURFACE_CURVE('',#15396,(#15400,#15407),.PCURVE_S1.);+#15396 = LINE('',#15397,#15398);+#15397 = CARTESIAN_POINT('',(-0.369944952102,6.440452938988E-02,1.015));+#15398 = VECTOR('',#15399,1.);+#15399 = DIRECTION('',(-0.,-0.,-1.));+#15400 = PCURVE('',#15330,#15401);+#15401 = DEFINITIONAL_REPRESENTATION('',(#15402),#15406);+#15402 = LINE('',#15403,#15404);+#15403 = CARTESIAN_POINT('',(1.,0.));+#15404 = VECTOR('',#15405,1.);+#15405 = DIRECTION('',(0.,-1.));+#15406 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15407 = PCURVE('',#15408,#15415);+#15408 = SURFACE_OF_LINEAR_EXTRUSION('',#15409,#15413);+#15409 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15410,#15411,#15412),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15410 = CARTESIAN_POINT('',(-0.369944952102,6.440452938988E-02,1.015));+#15411 = CARTESIAN_POINT('',(-0.369944952102,2.229387555804E-02,1.015));+#15412 = CARTESIAN_POINT('',(-0.394430106027,7.621837797616E-04,1.015));+#15413 = VECTOR('',#15414,1.);+#15414 = DIRECTION('',(0.,0.,1.));+#15415 = DEFINITIONAL_REPRESENTATION('',(#15416),#15420);+#15416 = LINE('',#15417,#15418);+#15417 = CARTESIAN_POINT('',(0.,0.));+#15418 = VECTOR('',#15419,1.);+#15419 = DIRECTION('',(0.,-1.));+#15420 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15421 = ORIENTED_EDGE('',*,*,#15422,.F.);+#15422 = EDGE_CURVE('',#15315,#15393,#15423,.T.);+#15423 = SURFACE_CURVE('',#15424,(#15428,#15435),.PCURVE_S1.);+#15424 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15425,#15426,#15427),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15425 = CARTESIAN_POINT('',(-0.394525378999,0.127761056083,1.015));+#15426 = CARTESIAN_POINT('',(-0.369944952102,0.106134091332,1.015));+#15427 = CARTESIAN_POINT('',(-0.369944952102,6.440452938988E-02,1.015));+#15428 = PCURVE('',#15330,#15429);+#15429 = DEFINITIONAL_REPRESENTATION('',(#15430),#15434);+#15430 = LINE('',#15431,#15432);+#15431 = CARTESIAN_POINT('',(0.,0.));+#15432 = VECTOR('',#15433,1.);+#15433 = DIRECTION('',(1.,0.));+#15434 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15435 = PCURVE('',#15197,#15436);+#15436 = DEFINITIONAL_REPRESENTATION('',(#15437),#15441);+#15437 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15438,#15439,#15440),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15438 = CARTESIAN_POINT('',(0.19283249628,0.262858131045));+#15439 = CARTESIAN_POINT('',(0.217412923177,0.241231166295));+#15440 = CARTESIAN_POINT('',(0.217412923177,0.199501604353));+#15441 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15442 = ADVANCED_FACE('',(#15443),#15408,.F.);+#15443 = FACE_BOUND('',#15444,.F.);+#15444 = EDGE_LOOP('',(#15445,#15446,#15469,#15499));+#15445 = ORIENTED_EDGE('',*,*,#15392,.T.);+#15446 = ORIENTED_EDGE('',*,*,#15447,.T.);+#15447 = EDGE_CURVE('',#15370,#15448,#15450,.T.);+#15448 = VERTEX_POINT('',#15449);+#15449 = CARTESIAN_POINT('',(-0.394430106027,7.621837797616E-04,0.975));+#15450 = SURFACE_CURVE('',#15451,(#15455,#15462),.PCURVE_S1.);+#15451 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15452,#15453,#15454),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15452 = CARTESIAN_POINT('',(-0.369944952102,6.440452938988E-02,0.975));+#15453 = CARTESIAN_POINT('',(-0.369944952102,2.229387555804E-02,0.975));+#15454 = CARTESIAN_POINT('',(-0.394430106027,7.621837797616E-04,0.975));+#15455 = PCURVE('',#15408,#15456);+#15456 = DEFINITIONAL_REPRESENTATION('',(#15457),#15461);+#15457 = LINE('',#15458,#15459);+#15458 = CARTESIAN_POINT('',(0.,-4.E-02));+#15459 = VECTOR('',#15460,1.);+#15460 = DIRECTION('',(1.,0.));+#15461 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15462 = PCURVE('',#15143,#15463);+#15463 = DEFINITIONAL_REPRESENTATION('',(#15464),#15468);+#15464 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15465,#15466,#15467),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15465 = CARTESIAN_POINT('',(0.217412923177,0.199501604353));+#15466 = CARTESIAN_POINT('',(0.217412923177,0.157390950521));+#15467 = CARTESIAN_POINT('',(0.192927769252,0.135859258743));+#15468 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15469 = ORIENTED_EDGE('',*,*,#15470,.F.);+#15470 = EDGE_CURVE('',#15471,#15448,#15473,.T.);+#15471 = VERTEX_POINT('',#15472);+#15472 = CARTESIAN_POINT('',(-0.394430106027,7.621837797616E-04,1.015));+#15473 = SURFACE_CURVE('',#15474,(#15478,#15485),.PCURVE_S1.);+#15474 = LINE('',#15475,#15476);+#15475 = CARTESIAN_POINT('',(-0.394430106027,7.621837797616E-04,1.015));+#15476 = VECTOR('',#15477,1.);+#15477 = DIRECTION('',(-0.,-0.,-1.));+#15478 = PCURVE('',#15408,#15479);+#15479 = DEFINITIONAL_REPRESENTATION('',(#15480),#15484);+#15480 = LINE('',#15481,#15482);+#15481 = CARTESIAN_POINT('',(1.,0.));+#15482 = VECTOR('',#15483,1.);+#15483 = DIRECTION('',(0.,-1.));+#15484 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15485 = PCURVE('',#15486,#15493);+#15486 = SURFACE_OF_LINEAR_EXTRUSION('',#15487,#15491);+#15487 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15488,#15489,#15490),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15488 = CARTESIAN_POINT('',(-0.394430106027,7.621837797616E-04,1.015));+#15489 = CARTESIAN_POINT('',(-0.418915259952,-2.076950799851E-02,1.015)+ );+#15490 = CARTESIAN_POINT('',(-0.466742292132,-2.076950799851E-02,1.015)+ );+#15491 = VECTOR('',#15492,1.);+#15492 = DIRECTION('',(0.,0.,1.));+#15493 = DEFINITIONAL_REPRESENTATION('',(#15494),#15498);+#15494 = LINE('',#15495,#15496);+#15495 = CARTESIAN_POINT('',(0.,0.));+#15496 = VECTOR('',#15497,1.);+#15497 = DIRECTION('',(0.,-1.));+#15498 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15499 = ORIENTED_EDGE('',*,*,#15500,.F.);+#15500 = EDGE_CURVE('',#15393,#15471,#15501,.T.);+#15501 = SURFACE_CURVE('',#15502,(#15506,#15513),.PCURVE_S1.);+#15502 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15503,#15504,#15505),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15503 = CARTESIAN_POINT('',(-0.369944952102,6.440452938988E-02,1.015));+#15504 = CARTESIAN_POINT('',(-0.369944952102,2.229387555804E-02,1.015));+#15505 = CARTESIAN_POINT('',(-0.394430106027,7.621837797616E-04,1.015));+#15506 = PCURVE('',#15408,#15507);+#15507 = DEFINITIONAL_REPRESENTATION('',(#15508),#15512);+#15508 = LINE('',#15509,#15510);+#15509 = CARTESIAN_POINT('',(0.,0.));+#15510 = VECTOR('',#15511,1.);+#15511 = DIRECTION('',(1.,0.));+#15512 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15513 = PCURVE('',#15197,#15514);+#15514 = DEFINITIONAL_REPRESENTATION('',(#15515),#15519);+#15515 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15516,#15517,#15518),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15516 = CARTESIAN_POINT('',(0.217412923177,0.199501604353));+#15517 = CARTESIAN_POINT('',(0.217412923177,0.157390950521));+#15518 = CARTESIAN_POINT('',(0.192927769252,0.135859258743));+#15519 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15520 = ADVANCED_FACE('',(#15521),#15486,.F.);+#15521 = FACE_BOUND('',#15522,.F.);+#15522 = EDGE_LOOP('',(#15523,#15524,#15547,#15575));+#15523 = ORIENTED_EDGE('',*,*,#15470,.T.);+#15524 = ORIENTED_EDGE('',*,*,#15525,.T.);+#15525 = EDGE_CURVE('',#15448,#15526,#15528,.T.);+#15526 = VERTEX_POINT('',#15527);+#15527 = CARTESIAN_POINT('',(-0.466742292132,-2.076950799851E-02,0.975)+ );+#15528 = SURFACE_CURVE('',#15529,(#15533,#15540),.PCURVE_S1.);+#15529 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15530,#15531,#15532),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15530 = CARTESIAN_POINT('',(-0.394430106027,7.621837797616E-04,0.975));+#15531 = CARTESIAN_POINT('',(-0.418915259952,-2.076950799851E-02,0.975)+ );+#15532 = CARTESIAN_POINT('',(-0.466742292132,-2.076950799851E-02,0.975)+ );+#15533 = PCURVE('',#15486,#15534);+#15534 = DEFINITIONAL_REPRESENTATION('',(#15535),#15539);+#15535 = LINE('',#15536,#15537);+#15536 = CARTESIAN_POINT('',(0.,-4.E-02));+#15537 = VECTOR('',#15538,1.);+#15538 = DIRECTION('',(1.,0.));+#15539 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15540 = PCURVE('',#15143,#15541);+#15541 = DEFINITIONAL_REPRESENTATION('',(#15542),#15546);+#15542 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15543,#15544,#15545),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15543 = CARTESIAN_POINT('',(0.192927769252,0.135859258743));+#15544 = CARTESIAN_POINT('',(0.168442615327,0.114327566964));+#15545 = CARTESIAN_POINT('',(0.120615583147,0.114327566964));+#15546 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15547 = ORIENTED_EDGE('',*,*,#15548,.F.);+#15548 = EDGE_CURVE('',#15549,#15526,#15551,.T.);+#15549 = VERTEX_POINT('',#15550);+#15550 = CARTESIAN_POINT('',(-0.466742292132,-2.076950799851E-02,1.015)+ );+#15551 = SURFACE_CURVE('',#15552,(#15556,#15563),.PCURVE_S1.);+#15552 = LINE('',#15553,#15554);+#15553 = CARTESIAN_POINT('',(-0.466742292132,-2.076950799851E-02,1.015)+ );+#15554 = VECTOR('',#15555,1.);+#15555 = DIRECTION('',(-0.,-0.,-1.));+#15556 = PCURVE('',#15486,#15557);+#15557 = DEFINITIONAL_REPRESENTATION('',(#15558),#15562);+#15558 = LINE('',#15559,#15560);+#15559 = CARTESIAN_POINT('',(1.,0.));+#15560 = VECTOR('',#15561,1.);+#15561 = DIRECTION('',(0.,-1.));+#15562 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15563 = PCURVE('',#15564,#15569);+#15564 = PLANE('',#15565);+#15565 = AXIS2_PLACEMENT_3D('',#15566,#15567,#15568);+#15566 = CARTESIAN_POINT('',(-0.466742292132,-2.076950799851E-02,1.015)+ );+#15567 = DIRECTION('',(0.,1.,0.));+#15568 = DIRECTION('',(-1.,0.,0.));+#15569 = DEFINITIONAL_REPRESENTATION('',(#15570),#15574);+#15570 = LINE('',#15571,#15572);+#15571 = CARTESIAN_POINT('',(0.,0.));+#15572 = VECTOR('',#15573,1.);+#15573 = DIRECTION('',(0.,-1.));+#15574 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15575 = ORIENTED_EDGE('',*,*,#15576,.F.);+#15576 = EDGE_CURVE('',#15471,#15549,#15577,.T.);+#15577 = SURFACE_CURVE('',#15578,(#15582,#15589),.PCURVE_S1.);+#15578 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15579,#15580,#15581),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15579 = CARTESIAN_POINT('',(-0.394430106027,7.621837797616E-04,1.015));+#15580 = CARTESIAN_POINT('',(-0.418915259952,-2.076950799851E-02,1.015)+ );+#15581 = CARTESIAN_POINT('',(-0.466742292132,-2.076950799851E-02,1.015)+ );+#15582 = PCURVE('',#15486,#15583);+#15583 = DEFINITIONAL_REPRESENTATION('',(#15584),#15588);+#15584 = LINE('',#15585,#15586);+#15585 = CARTESIAN_POINT('',(0.,0.));+#15586 = VECTOR('',#15587,1.);+#15587 = DIRECTION('',(1.,0.));+#15588 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15589 = PCURVE('',#15197,#15590);+#15590 = DEFINITIONAL_REPRESENTATION('',(#15591),#15595);+#15591 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15592,#15593,#15594),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15592 = CARTESIAN_POINT('',(0.192927769252,0.135859258743));+#15593 = CARTESIAN_POINT('',(0.168442615327,0.114327566964));+#15594 = CARTESIAN_POINT('',(0.120615583147,0.114327566964));+#15595 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15596 = ADVANCED_FACE('',(#15597),#15564,.F.);+#15597 = FACE_BOUND('',#15598,.F.);+#15598 = EDGE_LOOP('',(#15599,#15600,#15623,#15651));+#15599 = ORIENTED_EDGE('',*,*,#15548,.T.);+#15600 = ORIENTED_EDGE('',*,*,#15601,.T.);+#15601 = EDGE_CURVE('',#15526,#15602,#15604,.T.);+#15602 = VERTEX_POINT('',#15603);+#15603 = CARTESIAN_POINT('',(-0.511330043248,-2.076950799851E-02,0.975)+ );+#15604 = SURFACE_CURVE('',#15605,(#15609,#15616),.PCURVE_S1.);+#15605 = LINE('',#15606,#15607);+#15606 = CARTESIAN_POINT('',(-0.466742292132,-2.076950799851E-02,0.975)+ );+#15607 = VECTOR('',#15608,1.);+#15608 = DIRECTION('',(-1.,0.,0.));+#15609 = PCURVE('',#15564,#15610);+#15610 = DEFINITIONAL_REPRESENTATION('',(#15611),#15615);+#15611 = LINE('',#15612,#15613);+#15612 = CARTESIAN_POINT('',(0.,-4.E-02));+#15613 = VECTOR('',#15614,1.);+#15614 = DIRECTION('',(1.,0.));+#15615 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15616 = PCURVE('',#15143,#15617);+#15617 = DEFINITIONAL_REPRESENTATION('',(#15618),#15622);+#15618 = LINE('',#15619,#15620);+#15619 = CARTESIAN_POINT('',(0.120615583147,0.114327566964));+#15620 = VECTOR('',#15621,1.);+#15621 = DIRECTION('',(-1.,0.));+#15622 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15623 = ORIENTED_EDGE('',*,*,#15624,.F.);+#15624 = EDGE_CURVE('',#15625,#15602,#15627,.T.);+#15625 = VERTEX_POINT('',#15626);+#15626 = CARTESIAN_POINT('',(-0.511330043248,-2.076950799851E-02,1.015)+ );+#15627 = SURFACE_CURVE('',#15628,(#15632,#15639),.PCURVE_S1.);+#15628 = LINE('',#15629,#15630);+#15629 = CARTESIAN_POINT('',(-0.511330043248,-2.076950799851E-02,1.015)+ );+#15630 = VECTOR('',#15631,1.);+#15631 = DIRECTION('',(-0.,-0.,-1.));+#15632 = PCURVE('',#15564,#15633);+#15633 = DEFINITIONAL_REPRESENTATION('',(#15634),#15638);+#15634 = LINE('',#15635,#15636);+#15635 = CARTESIAN_POINT('',(4.458775111607E-02,0.));+#15636 = VECTOR('',#15637,1.);+#15637 = DIRECTION('',(0.,-1.));+#15638 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15639 = PCURVE('',#15640,#15645);+#15640 = PLANE('',#15641);+#15641 = AXIS2_PLACEMENT_3D('',#15642,#15643,#15644);+#15642 = CARTESIAN_POINT('',(-0.511330043248,-2.076950799851E-02,1.015)+ );+#15643 = DIRECTION('',(-1.,0.,0.));+#15644 = DIRECTION('',(0.,-1.,0.));+#15645 = DEFINITIONAL_REPRESENTATION('',(#15646),#15650);+#15646 = LINE('',#15647,#15648);+#15647 = CARTESIAN_POINT('',(0.,0.));+#15648 = VECTOR('',#15649,1.);+#15649 = DIRECTION('',(0.,-1.));+#15650 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15651 = ORIENTED_EDGE('',*,*,#15652,.F.);+#15652 = EDGE_CURVE('',#15549,#15625,#15653,.T.);+#15653 = SURFACE_CURVE('',#15654,(#15658,#15665),.PCURVE_S1.);+#15654 = LINE('',#15655,#15656);+#15655 = CARTESIAN_POINT('',(-0.466742292132,-2.076950799851E-02,1.015)+ );+#15656 = VECTOR('',#15657,1.);+#15657 = DIRECTION('',(-1.,0.,0.));+#15658 = PCURVE('',#15564,#15659);+#15659 = DEFINITIONAL_REPRESENTATION('',(#15660),#15664);+#15660 = LINE('',#15661,#15662);+#15661 = CARTESIAN_POINT('',(0.,0.));+#15662 = VECTOR('',#15663,1.);+#15663 = DIRECTION('',(1.,0.));+#15664 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15665 = PCURVE('',#15197,#15666);+#15666 = DEFINITIONAL_REPRESENTATION('',(#15667),#15671);+#15667 = LINE('',#15668,#15669);+#15668 = CARTESIAN_POINT('',(0.120615583147,0.114327566964));+#15669 = VECTOR('',#15670,1.);+#15670 = DIRECTION('',(-1.,0.));+#15671 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15672 = ADVANCED_FACE('',(#15673),#15640,.F.);+#15673 = FACE_BOUND('',#15674,.F.);+#15674 = EDGE_LOOP('',(#15675,#15676,#15699,#15722));+#15675 = ORIENTED_EDGE('',*,*,#15624,.T.);+#15676 = ORIENTED_EDGE('',*,*,#15677,.T.);+#15677 = EDGE_CURVE('',#15602,#15678,#15680,.T.);+#15678 = VERTEX_POINT('',#15679);+#15679 = CARTESIAN_POINT('',(-0.511330043248,-0.135097074963,0.975));+#15680 = SURFACE_CURVE('',#15681,(#15685,#15692),.PCURVE_S1.);+#15681 = LINE('',#15682,#15683);+#15682 = CARTESIAN_POINT('',(-0.511330043248,-2.076950799851E-02,0.975)+ );+#15683 = VECTOR('',#15684,1.);+#15684 = DIRECTION('',(0.,-1.,0.));+#15685 = PCURVE('',#15640,#15686);+#15686 = DEFINITIONAL_REPRESENTATION('',(#15687),#15691);+#15687 = LINE('',#15688,#15689);+#15688 = CARTESIAN_POINT('',(0.,-4.E-02));+#15689 = VECTOR('',#15690,1.);+#15690 = DIRECTION('',(1.,0.));+#15691 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15692 = PCURVE('',#15143,#15693);+#15693 = DEFINITIONAL_REPRESENTATION('',(#15694),#15698);+#15694 = LINE('',#15695,#15696);+#15695 = CARTESIAN_POINT('',(7.602783203125E-02,0.114327566964));+#15696 = VECTOR('',#15697,1.);+#15697 = DIRECTION('',(0.,-1.));+#15698 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15699 = ORIENTED_EDGE('',*,*,#15700,.F.);+#15700 = EDGE_CURVE('',#15701,#15678,#15703,.T.);+#15701 = VERTEX_POINT('',#15702);+#15702 = CARTESIAN_POINT('',(-0.511330043248,-0.135097074963,1.015));+#15703 = SURFACE_CURVE('',#15704,(#15708,#15715),.PCURVE_S1.);+#15704 = LINE('',#15705,#15706);+#15705 = CARTESIAN_POINT('',(-0.511330043248,-0.135097074963,1.015));+#15706 = VECTOR('',#15707,1.);+#15707 = DIRECTION('',(-0.,-0.,-1.));+#15708 = PCURVE('',#15640,#15709);+#15709 = DEFINITIONAL_REPRESENTATION('',(#15710),#15714);+#15710 = LINE('',#15711,#15712);+#15711 = CARTESIAN_POINT('',(0.114327566964,0.));+#15712 = VECTOR('',#15713,1.);+#15713 = DIRECTION('',(0.,-1.));+#15714 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15715 = PCURVE('',#15115,#15716);+#15716 = DEFINITIONAL_REPRESENTATION('',(#15717),#15721);+#15717 = LINE('',#15718,#15719);+#15718 = CARTESIAN_POINT('',(0.,0.));+#15719 = VECTOR('',#15720,1.);+#15720 = DIRECTION('',(0.,-1.));+#15721 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15722 = ORIENTED_EDGE('',*,*,#15723,.F.);+#15723 = EDGE_CURVE('',#15625,#15701,#15724,.T.);+#15724 = SURFACE_CURVE('',#15725,(#15729,#15736),.PCURVE_S1.);+#15725 = LINE('',#15726,#15727);+#15726 = CARTESIAN_POINT('',(-0.511330043248,-2.076950799851E-02,1.015)+ );+#15727 = VECTOR('',#15728,1.);+#15728 = DIRECTION('',(0.,-1.,0.));+#15729 = PCURVE('',#15640,#15730);+#15730 = DEFINITIONAL_REPRESENTATION('',(#15731),#15735);+#15731 = LINE('',#15732,#15733);+#15732 = CARTESIAN_POINT('',(0.,0.));+#15733 = VECTOR('',#15734,1.);+#15734 = DIRECTION('',(1.,0.));+#15735 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15736 = PCURVE('',#15197,#15737);+#15737 = DEFINITIONAL_REPRESENTATION('',(#15738),#15742);+#15738 = LINE('',#15739,#15740);+#15739 = CARTESIAN_POINT('',(7.602783203125E-02,0.114327566964));+#15740 = VECTOR('',#15741,1.);+#15741 = DIRECTION('',(0.,-1.));+#15742 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15743 = ADVANCED_FACE('',(#15744),#15115,.F.);+#15744 = FACE_BOUND('',#15745,.F.);+#15745 = EDGE_LOOP('',(#15746,#15747,#15768,#15769));+#15746 = ORIENTED_EDGE('',*,*,#15700,.T.);+#15747 = ORIENTED_EDGE('',*,*,#15748,.T.);+#15748 = EDGE_CURVE('',#15678,#15095,#15749,.T.);+#15749 = SURFACE_CURVE('',#15750,(#15754,#15761),.PCURVE_S1.);+#15750 = LINE('',#15751,#15752);+#15751 = CARTESIAN_POINT('',(-0.511330043248,-0.135097074963,0.975));+#15752 = VECTOR('',#15753,1.);+#15753 = DIRECTION('',(-1.,0.,0.));+#15754 = PCURVE('',#15115,#15755);+#15755 = DEFINITIONAL_REPRESENTATION('',(#15756),#15760);+#15756 = LINE('',#15757,#15758);+#15757 = CARTESIAN_POINT('',(0.,-4.E-02));+#15758 = VECTOR('',#15759,1.);+#15759 = DIRECTION('',(1.,0.));+#15760 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15761 = PCURVE('',#15143,#15762);+#15762 = DEFINITIONAL_REPRESENTATION('',(#15763),#15767);+#15763 = LINE('',#15764,#15765);+#15764 = CARTESIAN_POINT('',(7.602783203125E-02,0.));+#15765 = VECTOR('',#15766,1.);+#15766 = DIRECTION('',(-1.,0.));+#15767 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15768 = ORIENTED_EDGE('',*,*,#15092,.F.);+#15769 = ORIENTED_EDGE('',*,*,#15770,.F.);+#15770 = EDGE_CURVE('',#15701,#15093,#15771,.T.);+#15771 = SURFACE_CURVE('',#15772,(#15776,#15783),.PCURVE_S1.);+#15772 = LINE('',#15773,#15774);+#15773 = CARTESIAN_POINT('',(-0.511330043248,-0.135097074963,1.015));+#15774 = VECTOR('',#15775,1.);+#15775 = DIRECTION('',(-1.,0.,0.));+#15776 = PCURVE('',#15115,#15777);+#15777 = DEFINITIONAL_REPRESENTATION('',(#15778),#15782);+#15778 = LINE('',#15779,#15780);+#15779 = CARTESIAN_POINT('',(0.,0.));+#15780 = VECTOR('',#15781,1.);+#15781 = DIRECTION('',(1.,0.));+#15782 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15783 = PCURVE('',#15197,#15784);+#15784 = DEFINITIONAL_REPRESENTATION('',(#15785),#15789);+#15785 = LINE('',#15786,#15787);+#15786 = CARTESIAN_POINT('',(7.602783203125E-02,0.));+#15787 = VECTOR('',#15788,1.);+#15788 = DIRECTION('',(-1.,0.));+#15789 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15790 = ADVANCED_FACE('',(#15791),#15805,.F.);+#15791 = FACE_BOUND('',#15792,.F.);+#15792 = EDGE_LOOP('',(#15793,#15830,#15853,#15881));+#15793 = ORIENTED_EDGE('',*,*,#15794,.T.);+#15794 = EDGE_CURVE('',#15795,#15797,#15799,.T.);+#15795 = VERTEX_POINT('',#15796);+#15796 = CARTESIAN_POINT('',(-0.466742292132,0.117757393973,1.015));+#15797 = VERTEX_POINT('',#15798);+#15798 = CARTESIAN_POINT('',(-0.466742292132,0.117757393973,0.975));+#15799 = SURFACE_CURVE('',#15800,(#15804,#15816),.PCURVE_S1.);+#15800 = LINE('',#15801,#15802);+#15801 = CARTESIAN_POINT('',(-0.466742292132,0.117757393973,1.015));+#15802 = VECTOR('',#15803,1.);+#15803 = DIRECTION('',(-0.,-0.,-1.));+#15804 = PCURVE('',#15805,#15810);+#15805 = PLANE('',#15806);+#15806 = AXIS2_PLACEMENT_3D('',#15807,#15808,#15809);+#15807 = CARTESIAN_POINT('',(-0.466742292132,0.117757393973,1.015));+#15808 = DIRECTION('',(0.,1.,0.));+#15809 = DIRECTION('',(-1.,0.,0.));+#15810 = DEFINITIONAL_REPRESENTATION('',(#15811),#15815);+#15811 = LINE('',#15812,#15813);+#15812 = CARTESIAN_POINT('',(0.,0.));+#15813 = VECTOR('',#15814,1.);+#15814 = DIRECTION('',(0.,-1.));+#15815 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15816 = PCURVE('',#15817,#15824);+#15817 = SURFACE_OF_LINEAR_EXTRUSION('',#15818,#15822);+#15818 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15819,#15820,#15821),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15819 = CARTESIAN_POINT('',(-0.42501273019,0.10375226702,1.015));+#15820 = CARTESIAN_POINT('',(-0.439875313895,0.117757393973,1.015));+#15821 = CARTESIAN_POINT('',(-0.466742292132,0.117757393973,1.015));+#15822 = VECTOR('',#15823,1.);+#15823 = DIRECTION('',(0.,0.,1.));+#15824 = DEFINITIONAL_REPRESENTATION('',(#15825),#15829);+#15825 = LINE('',#15826,#15827);+#15826 = CARTESIAN_POINT('',(1.,0.));+#15827 = VECTOR('',#15828,1.);+#15828 = DIRECTION('',(0.,-1.));+#15829 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15830 = ORIENTED_EDGE('',*,*,#15831,.T.);+#15831 = EDGE_CURVE('',#15797,#15832,#15834,.T.);+#15832 = VERTEX_POINT('',#15833);+#15833 = CARTESIAN_POINT('',(-0.511330043248,0.117757393973,0.975));+#15834 = SURFACE_CURVE('',#15835,(#15839,#15846),.PCURVE_S1.);+#15835 = LINE('',#15836,#15837);+#15836 = CARTESIAN_POINT('',(-0.466742292132,0.117757393973,0.975));+#15837 = VECTOR('',#15838,1.);+#15838 = DIRECTION('',(-1.,0.,0.));+#15839 = PCURVE('',#15805,#15840);+#15840 = DEFINITIONAL_REPRESENTATION('',(#15841),#15845);+#15841 = LINE('',#15842,#15843);+#15842 = CARTESIAN_POINT('',(0.,-4.E-02));+#15843 = VECTOR('',#15844,1.);+#15844 = DIRECTION('',(1.,0.));+#15845 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15846 = PCURVE('',#15143,#15847);+#15847 = DEFINITIONAL_REPRESENTATION('',(#15848),#15852);+#15848 = LINE('',#15849,#15850);+#15849 = CARTESIAN_POINT('',(0.120615583147,0.252854468936));+#15850 = VECTOR('',#15851,1.);+#15851 = DIRECTION('',(-1.,0.));+#15852 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15853 = ORIENTED_EDGE('',*,*,#15854,.F.);+#15854 = EDGE_CURVE('',#15855,#15832,#15857,.T.);+#15855 = VERTEX_POINT('',#15856);+#15856 = CARTESIAN_POINT('',(-0.511330043248,0.117757393973,1.015));+#15857 = SURFACE_CURVE('',#15858,(#15862,#15869),.PCURVE_S1.);+#15858 = LINE('',#15859,#15860);+#15859 = CARTESIAN_POINT('',(-0.511330043248,0.117757393973,1.015));+#15860 = VECTOR('',#15861,1.);+#15861 = DIRECTION('',(-0.,-0.,-1.));+#15862 = PCURVE('',#15805,#15863);+#15863 = DEFINITIONAL_REPRESENTATION('',(#15864),#15868);+#15864 = LINE('',#15865,#15866);+#15865 = CARTESIAN_POINT('',(4.458775111607E-02,0.));+#15866 = VECTOR('',#15867,1.);+#15867 = DIRECTION('',(0.,-1.));+#15868 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15869 = PCURVE('',#15870,#15875);+#15870 = PLANE('',#15871);+#15871 = AXIS2_PLACEMENT_3D('',#15872,#15873,#15874);+#15872 = CARTESIAN_POINT('',(-0.511330043248,0.117757393973,1.015));+#15873 = DIRECTION('',(-1.,0.,0.));+#15874 = DIRECTION('',(0.,-1.,0.));+#15875 = DEFINITIONAL_REPRESENTATION('',(#15876),#15880);+#15876 = LINE('',#15877,#15878);+#15877 = CARTESIAN_POINT('',(0.,0.));+#15878 = VECTOR('',#15879,1.);+#15879 = DIRECTION('',(0.,-1.));+#15880 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15881 = ORIENTED_EDGE('',*,*,#15882,.F.);+#15882 = EDGE_CURVE('',#15795,#15855,#15883,.T.);+#15883 = SURFACE_CURVE('',#15884,(#15888,#15895),.PCURVE_S1.);+#15884 = LINE('',#15885,#15886);+#15885 = CARTESIAN_POINT('',(-0.466742292132,0.117757393973,1.015));+#15886 = VECTOR('',#15887,1.);+#15887 = DIRECTION('',(-1.,0.,0.));+#15888 = PCURVE('',#15805,#15889);+#15889 = DEFINITIONAL_REPRESENTATION('',(#15890),#15894);+#15890 = LINE('',#15891,#15892);+#15891 = CARTESIAN_POINT('',(0.,0.));+#15892 = VECTOR('',#15893,1.);+#15893 = DIRECTION('',(1.,0.));+#15894 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15895 = PCURVE('',#15197,#15896);+#15896 = DEFINITIONAL_REPRESENTATION('',(#15897),#15901);+#15897 = LINE('',#15898,#15899);+#15898 = CARTESIAN_POINT('',(0.120615583147,0.252854468936));+#15899 = VECTOR('',#15900,1.);+#15900 = DIRECTION('',(-1.,0.));+#15901 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15902 = ADVANCED_FACE('',(#15903),#15870,.F.);+#15903 = FACE_BOUND('',#15904,.F.);+#15904 = EDGE_LOOP('',(#15905,#15906,#15929,#15957));+#15905 = ORIENTED_EDGE('',*,*,#15854,.T.);+#15906 = ORIENTED_EDGE('',*,*,#15907,.T.);+#15907 = EDGE_CURVE('',#15832,#15908,#15910,.T.);+#15908 = VERTEX_POINT('',#15909);+#15909 = CARTESIAN_POINT('',(-0.511330043248,1.086111886161E-02,0.975));+#15910 = SURFACE_CURVE('',#15911,(#15915,#15922),.PCURVE_S1.);+#15911 = LINE('',#15912,#15913);+#15912 = CARTESIAN_POINT('',(-0.511330043248,0.117757393973,0.975));+#15913 = VECTOR('',#15914,1.);+#15914 = DIRECTION('',(0.,-1.,0.));+#15915 = PCURVE('',#15870,#15916);+#15916 = DEFINITIONAL_REPRESENTATION('',(#15917),#15921);+#15917 = LINE('',#15918,#15919);+#15918 = CARTESIAN_POINT('',(0.,-4.E-02));+#15919 = VECTOR('',#15920,1.);+#15920 = DIRECTION('',(1.,0.));+#15921 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15922 = PCURVE('',#15143,#15923);+#15923 = DEFINITIONAL_REPRESENTATION('',(#15924),#15928);+#15924 = LINE('',#15925,#15926);+#15925 = CARTESIAN_POINT('',(7.602783203125E-02,0.252854468936));+#15926 = VECTOR('',#15927,1.);+#15927 = DIRECTION('',(0.,-1.));+#15928 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15929 = ORIENTED_EDGE('',*,*,#15930,.F.);+#15930 = EDGE_CURVE('',#15931,#15908,#15933,.T.);+#15931 = VERTEX_POINT('',#15932);+#15932 = CARTESIAN_POINT('',(-0.511330043248,1.086111886161E-02,1.015));+#15933 = SURFACE_CURVE('',#15934,(#15938,#15945),.PCURVE_S1.);+#15934 = LINE('',#15935,#15936);+#15935 = CARTESIAN_POINT('',(-0.511330043248,1.086111886161E-02,1.015));+#15936 = VECTOR('',#15937,1.);+#15937 = DIRECTION('',(-0.,-0.,-1.));+#15938 = PCURVE('',#15870,#15939);+#15939 = DEFINITIONAL_REPRESENTATION('',(#15940),#15944);+#15940 = LINE('',#15941,#15942);+#15941 = CARTESIAN_POINT('',(0.106896275112,0.));+#15942 = VECTOR('',#15943,1.);+#15943 = DIRECTION('',(0.,-1.));+#15944 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15945 = PCURVE('',#15946,#15951);+#15946 = PLANE('',#15947);+#15947 = AXIS2_PLACEMENT_3D('',#15948,#15949,#15950);+#15948 = CARTESIAN_POINT('',(-0.511330043248,1.086111886161E-02,1.015));+#15949 = DIRECTION('',(0.,-1.,0.));+#15950 = DIRECTION('',(1.,0.,0.));+#15951 = DEFINITIONAL_REPRESENTATION('',(#15952),#15956);+#15952 = LINE('',#15953,#15954);+#15953 = CARTESIAN_POINT('',(0.,0.));+#15954 = VECTOR('',#15955,1.);+#15955 = DIRECTION('',(0.,-1.));+#15956 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15957 = ORIENTED_EDGE('',*,*,#15958,.F.);+#15958 = EDGE_CURVE('',#15855,#15931,#15959,.T.);+#15959 = SURFACE_CURVE('',#15960,(#15964,#15971),.PCURVE_S1.);+#15960 = LINE('',#15961,#15962);+#15961 = CARTESIAN_POINT('',(-0.511330043248,0.117757393973,1.015));+#15962 = VECTOR('',#15963,1.);+#15963 = DIRECTION('',(0.,-1.,0.));+#15964 = PCURVE('',#15870,#15965);+#15965 = DEFINITIONAL_REPRESENTATION('',(#15966),#15970);+#15966 = LINE('',#15967,#15968);+#15967 = CARTESIAN_POINT('',(0.,0.));+#15968 = VECTOR('',#15969,1.);+#15969 = DIRECTION('',(1.,0.));+#15970 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15971 = PCURVE('',#15197,#15972);+#15972 = DEFINITIONAL_REPRESENTATION('',(#15973),#15977);+#15973 = LINE('',#15974,#15975);+#15974 = CARTESIAN_POINT('',(7.602783203125E-02,0.252854468936));+#15975 = VECTOR('',#15976,1.);+#15976 = DIRECTION('',(0.,-1.));+#15977 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15978 = ADVANCED_FACE('',(#15979),#15946,.F.);+#15979 = FACE_BOUND('',#15980,.F.);+#15980 = EDGE_LOOP('',(#15981,#15982,#16005,#16035));+#15981 = ORIENTED_EDGE('',*,*,#15930,.T.);+#15982 = ORIENTED_EDGE('',*,*,#15983,.T.);+#15983 = EDGE_CURVE('',#15908,#15984,#15986,.T.);+#15984 = VERTEX_POINT('',#15985);+#15985 = CARTESIAN_POINT('',(-0.466742292132,1.086111886161E-02,0.975));+#15986 = SURFACE_CURVE('',#15987,(#15991,#15998),.PCURVE_S1.);+#15987 = LINE('',#15988,#15989);+#15988 = CARTESIAN_POINT('',(-0.511330043248,1.086111886161E-02,0.975));+#15989 = VECTOR('',#15990,1.);+#15990 = DIRECTION('',(1.,0.,0.));+#15991 = PCURVE('',#15946,#15992);+#15992 = DEFINITIONAL_REPRESENTATION('',(#15993),#15997);+#15993 = LINE('',#15994,#15995);+#15994 = CARTESIAN_POINT('',(0.,-4.E-02));+#15995 = VECTOR('',#15996,1.);+#15996 = DIRECTION('',(1.,0.));+#15997 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15998 = PCURVE('',#15143,#15999);+#15999 = DEFINITIONAL_REPRESENTATION('',(#16000),#16004);+#16000 = LINE('',#16001,#16002);+#16001 = CARTESIAN_POINT('',(7.602783203125E-02,0.145958193824));+#16002 = VECTOR('',#16003,1.);+#16003 = DIRECTION('',(1.,0.));+#16004 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16005 = ORIENTED_EDGE('',*,*,#16006,.F.);+#16006 = EDGE_CURVE('',#16007,#15984,#16009,.T.);+#16007 = VERTEX_POINT('',#16008);+#16008 = CARTESIAN_POINT('',(-0.466742292132,1.086111886161E-02,1.015));+#16009 = SURFACE_CURVE('',#16010,(#16014,#16021),.PCURVE_S1.);+#16010 = LINE('',#16011,#16012);+#16011 = CARTESIAN_POINT('',(-0.466742292132,1.086111886161E-02,1.015));+#16012 = VECTOR('',#16013,1.);+#16013 = DIRECTION('',(-0.,-0.,-1.));+#16014 = PCURVE('',#15946,#16015);+#16015 = DEFINITIONAL_REPRESENTATION('',(#16016),#16020);+#16016 = LINE('',#16017,#16018);+#16017 = CARTESIAN_POINT('',(4.458775111607E-02,0.));+#16018 = VECTOR('',#16019,1.);+#16019 = DIRECTION('',(0.,-1.));+#16020 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16021 = PCURVE('',#16022,#16029);+#16022 = SURFACE_OF_LINEAR_EXTRUSION('',#16023,#16027);+#16023 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16024,#16025,#16026),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16024 = CARTESIAN_POINT('',(-0.466742292132,1.086111886161E-02,1.015));+#16025 = CARTESIAN_POINT('',(-0.44006585984,1.086111886161E-02,1.015));+#16026 = CARTESIAN_POINT('',(-0.425108003162,2.49615187872E-02,1.015));+#16027 = VECTOR('',#16028,1.);+#16028 = DIRECTION('',(0.,0.,1.));+#16029 = DEFINITIONAL_REPRESENTATION('',(#16030),#16034);+#16030 = LINE('',#16031,#16032);+#16031 = CARTESIAN_POINT('',(0.,0.));+#16032 = VECTOR('',#16033,1.);+#16033 = DIRECTION('',(0.,-1.));+#16034 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16035 = ORIENTED_EDGE('',*,*,#16036,.F.);+#16036 = EDGE_CURVE('',#15931,#16007,#16037,.T.);+#16037 = SURFACE_CURVE('',#16038,(#16042,#16049),.PCURVE_S1.);+#16038 = LINE('',#16039,#16040);+#16039 = CARTESIAN_POINT('',(-0.511330043248,1.086111886161E-02,1.015));+#16040 = VECTOR('',#16041,1.);+#16041 = DIRECTION('',(1.,0.,0.));+#16042 = PCURVE('',#15946,#16043);+#16043 = DEFINITIONAL_REPRESENTATION('',(#16044),#16048);+#16044 = LINE('',#16045,#16046);+#16045 = CARTESIAN_POINT('',(0.,0.));+#16046 = VECTOR('',#16047,1.);+#16047 = DIRECTION('',(1.,0.));+#16048 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16049 = PCURVE('',#15197,#16050);+#16050 = DEFINITIONAL_REPRESENTATION('',(#16051),#16055);+#16051 = LINE('',#16052,#16053);+#16052 = CARTESIAN_POINT('',(7.602783203125E-02,0.145958193824));+#16053 = VECTOR('',#16054,1.);+#16054 = DIRECTION('',(1.,0.));+#16055 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16056 = ADVANCED_FACE('',(#16057),#16022,.F.);+#16057 = FACE_BOUND('',#16058,.F.);+#16058 = EDGE_LOOP('',(#16059,#16060,#16083,#16113));+#16059 = ORIENTED_EDGE('',*,*,#16006,.T.);+#16060 = ORIENTED_EDGE('',*,*,#16061,.T.);+#16061 = EDGE_CURVE('',#15984,#16062,#16064,.T.);+#16062 = VERTEX_POINT('',#16063);+#16063 = CARTESIAN_POINT('',(-0.425108003162,2.49615187872E-02,0.975));+#16064 = SURFACE_CURVE('',#16065,(#16069,#16076),.PCURVE_S1.);+#16065 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16066,#16067,#16068),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16066 = CARTESIAN_POINT('',(-0.466742292132,1.086111886161E-02,0.975));+#16067 = CARTESIAN_POINT('',(-0.44006585984,1.086111886161E-02,0.975));+#16068 = CARTESIAN_POINT('',(-0.425108003162,2.49615187872E-02,0.975));+#16069 = PCURVE('',#16022,#16070);+#16070 = DEFINITIONAL_REPRESENTATION('',(#16071),#16075);+#16071 = LINE('',#16072,#16073);+#16072 = CARTESIAN_POINT('',(0.,-4.E-02));+#16073 = VECTOR('',#16074,1.);+#16074 = DIRECTION('',(1.,0.));+#16075 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16076 = PCURVE('',#15143,#16077);+#16077 = DEFINITIONAL_REPRESENTATION('',(#16078),#16082);+#16078 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16079,#16080,#16081),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16079 = CARTESIAN_POINT('',(0.120615583147,0.145958193824));+#16080 = CARTESIAN_POINT('',(0.147292015439,0.145958193824));+#16081 = CARTESIAN_POINT('',(0.162249872117,0.16005859375));+#16082 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16083 = ORIENTED_EDGE('',*,*,#16084,.F.);+#16084 = EDGE_CURVE('',#16085,#16062,#16087,.T.);+#16085 = VERTEX_POINT('',#16086);+#16086 = CARTESIAN_POINT('',(-0.425108003162,2.49615187872E-02,1.015));+#16087 = SURFACE_CURVE('',#16088,(#16092,#16099),.PCURVE_S1.);+#16088 = LINE('',#16089,#16090);+#16089 = CARTESIAN_POINT('',(-0.425108003162,2.49615187872E-02,1.015));+#16090 = VECTOR('',#16091,1.);+#16091 = DIRECTION('',(-0.,-0.,-1.));+#16092 = PCURVE('',#16022,#16093);+#16093 = DEFINITIONAL_REPRESENTATION('',(#16094),#16098);+#16094 = LINE('',#16095,#16096);+#16095 = CARTESIAN_POINT('',(1.,0.));+#16096 = VECTOR('',#16097,1.);+#16097 = DIRECTION('',(0.,-1.));+#16098 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16099 = PCURVE('',#16100,#16107);+#16100 = SURFACE_OF_LINEAR_EXTRUSION('',#16101,#16105);+#16101 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16102,#16103,#16104),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16102 = CARTESIAN_POINT('',(-0.425108003162,2.49615187872E-02,1.015));+#16103 = CARTESIAN_POINT('',(-0.410150146484,3.90619187128E-02,1.015));+#16104 = CARTESIAN_POINT('',(-0.410150146484,6.440452938988E-02,1.015));+#16105 = VECTOR('',#16106,1.);+#16106 = DIRECTION('',(0.,0.,1.));+#16107 = DEFINITIONAL_REPRESENTATION('',(#16108),#16112);+#16108 = LINE('',#16109,#16110);+#16109 = CARTESIAN_POINT('',(0.,0.));+#16110 = VECTOR('',#16111,1.);+#16111 = DIRECTION('',(0.,-1.));+#16112 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16113 = ORIENTED_EDGE('',*,*,#16114,.F.);+#16114 = EDGE_CURVE('',#16007,#16085,#16115,.T.);+#16115 = SURFACE_CURVE('',#16116,(#16120,#16127),.PCURVE_S1.);+#16116 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16117,#16118,#16119),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16117 = CARTESIAN_POINT('',(-0.466742292132,1.086111886161E-02,1.015));+#16118 = CARTESIAN_POINT('',(-0.44006585984,1.086111886161E-02,1.015));+#16119 = CARTESIAN_POINT('',(-0.425108003162,2.49615187872E-02,1.015));+#16120 = PCURVE('',#16022,#16121);+#16121 = DEFINITIONAL_REPRESENTATION('',(#16122),#16126);+#16122 = LINE('',#16123,#16124);+#16123 = CARTESIAN_POINT('',(0.,0.));+#16124 = VECTOR('',#16125,1.);+#16125 = DIRECTION('',(1.,0.));+#16126 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16127 = PCURVE('',#15197,#16128);+#16128 = DEFINITIONAL_REPRESENTATION('',(#16129),#16133);+#16129 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16130,#16131,#16132),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16130 = CARTESIAN_POINT('',(0.120615583147,0.145958193824));+#16131 = CARTESIAN_POINT('',(0.147292015439,0.145958193824));+#16132 = CARTESIAN_POINT('',(0.162249872117,0.16005859375));+#16133 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16134 = ADVANCED_FACE('',(#16135),#16100,.F.);+#16135 = FACE_BOUND('',#16136,.F.);+#16136 = EDGE_LOOP('',(#16137,#16138,#16161,#16191));+#16137 = ORIENTED_EDGE('',*,*,#16084,.T.);+#16138 = ORIENTED_EDGE('',*,*,#16139,.T.);+#16139 = EDGE_CURVE('',#16062,#16140,#16142,.T.);+#16140 = VERTEX_POINT('',#16141);+#16141 = CARTESIAN_POINT('',(-0.410150146484,6.440452938988E-02,0.975));+#16142 = SURFACE_CURVE('',#16143,(#16147,#16154),.PCURVE_S1.);+#16143 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16144,#16145,#16146),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16144 = CARTESIAN_POINT('',(-0.425108003162,2.49615187872E-02,0.975));+#16145 = CARTESIAN_POINT('',(-0.410150146484,3.90619187128E-02,0.975));+#16146 = CARTESIAN_POINT('',(-0.410150146484,6.440452938988E-02,0.975));+#16147 = PCURVE('',#16100,#16148);+#16148 = DEFINITIONAL_REPRESENTATION('',(#16149),#16153);+#16149 = LINE('',#16150,#16151);+#16150 = CARTESIAN_POINT('',(0.,-4.E-02));+#16151 = VECTOR('',#16152,1.);+#16152 = DIRECTION('',(1.,0.));+#16153 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16154 = PCURVE('',#15143,#16155);+#16155 = DEFINITIONAL_REPRESENTATION('',(#16156),#16160);+#16156 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16157,#16158,#16159),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16157 = CARTESIAN_POINT('',(0.162249872117,0.16005859375));+#16158 = CARTESIAN_POINT('',(0.177207728795,0.174158993676));+#16159 = CARTESIAN_POINT('',(0.177207728795,0.199501604353));+#16160 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16161 = ORIENTED_EDGE('',*,*,#16162,.F.);+#16162 = EDGE_CURVE('',#16163,#16140,#16165,.T.);+#16163 = VERTEX_POINT('',#16164);+#16164 = CARTESIAN_POINT('',(-0.410150146484,6.440452938988E-02,1.015));+#16165 = SURFACE_CURVE('',#16166,(#16170,#16177),.PCURVE_S1.);+#16166 = LINE('',#16167,#16168);+#16167 = CARTESIAN_POINT('',(-0.410150146484,6.440452938988E-02,1.015));+#16168 = VECTOR('',#16169,1.);+#16169 = DIRECTION('',(-0.,-0.,-1.));+#16170 = PCURVE('',#16100,#16171);+#16171 = DEFINITIONAL_REPRESENTATION('',(#16172),#16176);+#16172 = LINE('',#16173,#16174);+#16173 = CARTESIAN_POINT('',(1.,0.));+#16174 = VECTOR('',#16175,1.);+#16175 = DIRECTION('',(0.,-1.));+#16176 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16177 = PCURVE('',#16178,#16185);+#16178 = SURFACE_OF_LINEAR_EXTRUSION('',#16179,#16183);+#16179 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16180,#16181,#16182),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16180 = CARTESIAN_POINT('',(-0.410150146484,6.440452938988E-02,1.015));+#16181 = CARTESIAN_POINT('',(-0.410150146484,8.974714006696E-02,1.015));+#16182 = CARTESIAN_POINT('',(-0.42501273019,0.10375226702,1.015));+#16183 = VECTOR('',#16184,1.);+#16184 = DIRECTION('',(0.,0.,1.));+#16185 = DEFINITIONAL_REPRESENTATION('',(#16186),#16190);+#16186 = LINE('',#16187,#16188);+#16187 = CARTESIAN_POINT('',(0.,0.));+#16188 = VECTOR('',#16189,1.);+#16189 = DIRECTION('',(0.,-1.));+#16190 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16191 = ORIENTED_EDGE('',*,*,#16192,.F.);+#16192 = EDGE_CURVE('',#16085,#16163,#16193,.T.);+#16193 = SURFACE_CURVE('',#16194,(#16198,#16205),.PCURVE_S1.);+#16194 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16195,#16196,#16197),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16195 = CARTESIAN_POINT('',(-0.425108003162,2.49615187872E-02,1.015));+#16196 = CARTESIAN_POINT('',(-0.410150146484,3.90619187128E-02,1.015));+#16197 = CARTESIAN_POINT('',(-0.410150146484,6.440452938988E-02,1.015));+#16198 = PCURVE('',#16100,#16199);+#16199 = DEFINITIONAL_REPRESENTATION('',(#16200),#16204);+#16200 = LINE('',#16201,#16202);+#16201 = CARTESIAN_POINT('',(0.,0.));+#16202 = VECTOR('',#16203,1.);+#16203 = DIRECTION('',(1.,0.));+#16204 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16205 = PCURVE('',#15197,#16206);+#16206 = DEFINITIONAL_REPRESENTATION('',(#16207),#16211);+#16207 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16208,#16209,#16210),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16208 = CARTESIAN_POINT('',(0.162249872117,0.16005859375));+#16209 = CARTESIAN_POINT('',(0.177207728795,0.174158993676));+#16210 = CARTESIAN_POINT('',(0.177207728795,0.199501604353));+#16211 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16212 = ADVANCED_FACE('',(#16213),#16178,.F.);+#16213 = FACE_BOUND('',#16214,.F.);+#16214 = EDGE_LOOP('',(#16215,#16216,#16239,#16262));+#16215 = ORIENTED_EDGE('',*,*,#16162,.T.);+#16216 = ORIENTED_EDGE('',*,*,#16217,.T.);+#16217 = EDGE_CURVE('',#16140,#16218,#16220,.T.);+#16218 = VERTEX_POINT('',#16219);+#16219 = CARTESIAN_POINT('',(-0.42501273019,0.10375226702,0.975));+#16220 = SURFACE_CURVE('',#16221,(#16225,#16232),.PCURVE_S1.);+#16221 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16222,#16223,#16224),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16222 = CARTESIAN_POINT('',(-0.410150146484,6.440452938988E-02,0.975));+#16223 = CARTESIAN_POINT('',(-0.410150146484,8.974714006696E-02,0.975));+#16224 = CARTESIAN_POINT('',(-0.42501273019,0.10375226702,0.975));+#16225 = PCURVE('',#16178,#16226);+#16226 = DEFINITIONAL_REPRESENTATION('',(#16227),#16231);+#16227 = LINE('',#16228,#16229);+#16228 = CARTESIAN_POINT('',(0.,-4.E-02));+#16229 = VECTOR('',#16230,1.);+#16230 = DIRECTION('',(1.,0.));+#16231 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16232 = PCURVE('',#15143,#16233);+#16233 = DEFINITIONAL_REPRESENTATION('',(#16234),#16238);+#16234 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16235,#16236,#16237),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16235 = CARTESIAN_POINT('',(0.177207728795,0.199501604353));+#16236 = CARTESIAN_POINT('',(0.177207728795,0.22484421503));+#16237 = CARTESIAN_POINT('',(0.162345145089,0.238849341983));+#16238 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16239 = ORIENTED_EDGE('',*,*,#16240,.F.);+#16240 = EDGE_CURVE('',#16241,#16218,#16243,.T.);+#16241 = VERTEX_POINT('',#16242);+#16242 = CARTESIAN_POINT('',(-0.42501273019,0.10375226702,1.015));+#16243 = SURFACE_CURVE('',#16244,(#16248,#16255),.PCURVE_S1.);+#16244 = LINE('',#16245,#16246);+#16245 = CARTESIAN_POINT('',(-0.42501273019,0.10375226702,1.015));+#16246 = VECTOR('',#16247,1.);+#16247 = DIRECTION('',(-0.,-0.,-1.));+#16248 = PCURVE('',#16178,#16249);+#16249 = DEFINITIONAL_REPRESENTATION('',(#16250),#16254);+#16250 = LINE('',#16251,#16252);+#16251 = CARTESIAN_POINT('',(1.,0.));+#16252 = VECTOR('',#16253,1.);+#16253 = DIRECTION('',(0.,-1.));+#16254 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16255 = PCURVE('',#15817,#16256);+#16256 = DEFINITIONAL_REPRESENTATION('',(#16257),#16261);+#16257 = LINE('',#16258,#16259);+#16258 = CARTESIAN_POINT('',(0.,0.));+#16259 = VECTOR('',#16260,1.);+#16260 = DIRECTION('',(0.,-1.));+#16261 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16262 = ORIENTED_EDGE('',*,*,#16263,.F.);+#16263 = EDGE_CURVE('',#16163,#16241,#16264,.T.);+#16264 = SURFACE_CURVE('',#16265,(#16269,#16276),.PCURVE_S1.);+#16265 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16266,#16267,#16268),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16266 = CARTESIAN_POINT('',(-0.410150146484,6.440452938988E-02,1.015));+#16267 = CARTESIAN_POINT('',(-0.410150146484,8.974714006696E-02,1.015));+#16268 = CARTESIAN_POINT('',(-0.42501273019,0.10375226702,1.015));+#16269 = PCURVE('',#16178,#16270);+#16270 = DEFINITIONAL_REPRESENTATION('',(#16271),#16275);+#16271 = LINE('',#16272,#16273);+#16272 = CARTESIAN_POINT('',(0.,0.));+#16273 = VECTOR('',#16274,1.);+#16274 = DIRECTION('',(1.,0.));+#16275 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16276 = PCURVE('',#15197,#16277);+#16277 = DEFINITIONAL_REPRESENTATION('',(#16278),#16282);+#16278 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16279,#16280,#16281),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16279 = CARTESIAN_POINT('',(0.177207728795,0.199501604353));+#16280 = CARTESIAN_POINT('',(0.177207728795,0.22484421503));+#16281 = CARTESIAN_POINT('',(0.162345145089,0.238849341983));+#16282 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16283 = ADVANCED_FACE('',(#16284),#15817,.F.);+#16284 = FACE_BOUND('',#16285,.F.);+#16285 = EDGE_LOOP('',(#16286,#16287,#16308,#16309));+#16286 = ORIENTED_EDGE('',*,*,#16240,.T.);+#16287 = ORIENTED_EDGE('',*,*,#16288,.T.);+#16288 = EDGE_CURVE('',#16218,#15797,#16289,.T.);+#16289 = SURFACE_CURVE('',#16290,(#16294,#16301),.PCURVE_S1.);+#16290 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16291,#16292,#16293),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16291 = CARTESIAN_POINT('',(-0.42501273019,0.10375226702,0.975));+#16292 = CARTESIAN_POINT('',(-0.439875313895,0.117757393973,0.975));+#16293 = CARTESIAN_POINT('',(-0.466742292132,0.117757393973,0.975));+#16294 = PCURVE('',#15817,#16295);+#16295 = DEFINITIONAL_REPRESENTATION('',(#16296),#16300);+#16296 = LINE('',#16297,#16298);+#16297 = CARTESIAN_POINT('',(0.,-4.E-02));+#16298 = VECTOR('',#16299,1.);+#16299 = DIRECTION('',(1.,0.));+#16300 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16301 = PCURVE('',#15143,#16302);+#16302 = DEFINITIONAL_REPRESENTATION('',(#16303),#16307);+#16303 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16304,#16305,#16306),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16304 = CARTESIAN_POINT('',(0.162345145089,0.238849341983));+#16305 = CARTESIAN_POINT('',(0.147482561384,0.252854468936));+#16306 = CARTESIAN_POINT('',(0.120615583147,0.252854468936));+#16307 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16308 = ORIENTED_EDGE('',*,*,#15794,.F.);+#16309 = ORIENTED_EDGE('',*,*,#16310,.F.);+#16310 = EDGE_CURVE('',#16241,#15795,#16311,.T.);+#16311 = SURFACE_CURVE('',#16312,(#16316,#16323),.PCURVE_S1.);+#16312 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16313,#16314,#16315),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16313 = CARTESIAN_POINT('',(-0.42501273019,0.10375226702,1.015));+#16314 = CARTESIAN_POINT('',(-0.439875313895,0.117757393973,1.015));+#16315 = CARTESIAN_POINT('',(-0.466742292132,0.117757393973,1.015));+#16316 = PCURVE('',#15817,#16317);+#16317 = DEFINITIONAL_REPRESENTATION('',(#16318),#16322);+#16318 = LINE('',#16319,#16320);+#16319 = CARTESIAN_POINT('',(0.,0.));+#16320 = VECTOR('',#16321,1.);+#16321 = DIRECTION('',(1.,0.));+#16322 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16323 = PCURVE('',#15197,#16324);+#16324 = DEFINITIONAL_REPRESENTATION('',(#16325),#16329);+#16325 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16326,#16327,#16328),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16326 = CARTESIAN_POINT('',(0.162345145089,0.238849341983));+#16327 = CARTESIAN_POINT('',(0.147482561384,0.252854468936));+#16328 = CARTESIAN_POINT('',(0.120615583147,0.252854468936));+#16329 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16330 = ADVANCED_FACE('',(#16331,#16342),#15197,.T.);+#16331 = FACE_BOUND('',#16332,.F.);+#16332 = EDGE_LOOP('',(#16333,#16334,#16335,#16336,#16337,#16338,#16339,+ #16340,#16341));+#16333 = ORIENTED_EDGE('',*,*,#15183,.T.);+#16334 = ORIENTED_EDGE('',*,*,#15266,.T.);+#16335 = ORIENTED_EDGE('',*,*,#15344,.T.);+#16336 = ORIENTED_EDGE('',*,*,#15422,.T.);+#16337 = ORIENTED_EDGE('',*,*,#15500,.T.);+#16338 = ORIENTED_EDGE('',*,*,#15576,.T.);+#16339 = ORIENTED_EDGE('',*,*,#15652,.T.);+#16340 = ORIENTED_EDGE('',*,*,#15723,.T.);+#16341 = ORIENTED_EDGE('',*,*,#15770,.T.);+#16342 = FACE_BOUND('',#16343,.F.);+#16343 = EDGE_LOOP('',(#16344,#16345,#16346,#16347,#16348,#16349,#16350)+ );+#16344 = ORIENTED_EDGE('',*,*,#15882,.T.);+#16345 = ORIENTED_EDGE('',*,*,#15958,.T.);+#16346 = ORIENTED_EDGE('',*,*,#16036,.T.);+#16347 = ORIENTED_EDGE('',*,*,#16114,.T.);+#16348 = ORIENTED_EDGE('',*,*,#16192,.T.);+#16349 = ORIENTED_EDGE('',*,*,#16263,.T.);+#16350 = ORIENTED_EDGE('',*,*,#16310,.T.);+#16351 = ADVANCED_FACE('',(#16352,#16363),#15143,.F.);+#16352 = FACE_BOUND('',#16353,.T.);+#16353 = EDGE_LOOP('',(#16354,#16355,#16356,#16357,#16358,#16359,#16360,+ #16361,#16362));+#16354 = ORIENTED_EDGE('',*,*,#15127,.T.);+#16355 = ORIENTED_EDGE('',*,*,#15213,.T.);+#16356 = ORIENTED_EDGE('',*,*,#15291,.T.);+#16357 = ORIENTED_EDGE('',*,*,#15369,.T.);+#16358 = ORIENTED_EDGE('',*,*,#15447,.T.);+#16359 = ORIENTED_EDGE('',*,*,#15525,.T.);+#16360 = ORIENTED_EDGE('',*,*,#15601,.T.);+#16361 = ORIENTED_EDGE('',*,*,#15677,.T.);+#16362 = ORIENTED_EDGE('',*,*,#15748,.T.);+#16363 = FACE_BOUND('',#16364,.T.);+#16364 = EDGE_LOOP('',(#16365,#16366,#16367,#16368,#16369,#16370,#16371)+ );+#16365 = ORIENTED_EDGE('',*,*,#15831,.T.);+#16366 = ORIENTED_EDGE('',*,*,#15907,.T.);+#16367 = ORIENTED_EDGE('',*,*,#15983,.T.);+#16368 = ORIENTED_EDGE('',*,*,#16061,.T.);+#16369 = ORIENTED_EDGE('',*,*,#16139,.T.);+#16370 = ORIENTED_EDGE('',*,*,#16217,.T.);+#16371 = ORIENTED_EDGE('',*,*,#16288,.T.);+#16372 = MANIFOLD_SOLID_BREP('',#16373);+#16373 = CLOSED_SHELL('',(#16374,#16498,#16576,#16654,#16732,#16810,+ #16888,#16964,#17042,#17120,#17198,#17276,#17354,#17432,#17508,+ #17586,#17664,#17742,#17820,#17898,#17976,#18052,#18130,#18208,+ #18286,#18364,#18442,#18513,#18560,#18591));+#16374 = ADVANCED_FACE('',(#16375),#16389,.F.);+#16375 = FACE_BOUND('',#16376,.F.);+#16376 = EDGE_LOOP('',(#16377,#16414,#16442,#16472));+#16377 = ORIENTED_EDGE('',*,*,#16378,.T.);+#16378 = EDGE_CURVE('',#16379,#16381,#16383,.T.);+#16379 = VERTEX_POINT('',#16380);+#16380 = CARTESIAN_POINT('',(-0.159582228888,0.139670177641,1.015));+#16381 = VERTEX_POINT('',#16382);+#16382 = CARTESIAN_POINT('',(-0.159582228888,0.139670177641,0.975));+#16383 = SURFACE_CURVE('',#16384,(#16388,#16400),.PCURVE_S1.);+#16384 = LINE('',#16385,#16386);+#16385 = CARTESIAN_POINT('',(-0.159582228888,0.139670177641,1.015));+#16386 = VECTOR('',#16387,1.);+#16387 = DIRECTION('',(-0.,-0.,-1.));+#16388 = PCURVE('',#16389,#16394);+#16389 = PLANE('',#16390);+#16390 = AXIS2_PLACEMENT_3D('',#16391,#16392,#16393);+#16391 = CARTESIAN_POINT('',(-0.159582228888,0.139670177641,1.015));+#16392 = DIRECTION('',(-1.,0.,0.));+#16393 = DIRECTION('',(0.,-1.,0.));+#16394 = DEFINITIONAL_REPRESENTATION('',(#16395),#16399);+#16395 = LINE('',#16396,#16397);+#16396 = CARTESIAN_POINT('',(0.,0.));+#16397 = VECTOR('',#16398,1.);+#16398 = DIRECTION('',(0.,-1.));+#16399 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16400 = PCURVE('',#16401,#16408);+#16401 = SURFACE_OF_LINEAR_EXTRUSION('',#16402,#16406);+#16402 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16403,#16404,#16405),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16403 = CARTESIAN_POINT('',(-0.197691417876,0.15081711542,1.015));+#16404 = CARTESIAN_POINT('',(-0.179589553106,0.147101469494,1.015));+#16405 = CARTESIAN_POINT('',(-0.159582228888,0.139670177641,1.015));+#16406 = VECTOR('',#16407,1.);+#16407 = DIRECTION('',(0.,0.,1.));+#16408 = DEFINITIONAL_REPRESENTATION('',(#16409),#16413);+#16409 = LINE('',#16410,#16411);+#16410 = CARTESIAN_POINT('',(1.,0.));+#16411 = VECTOR('',#16412,1.);+#16412 = DIRECTION('',(0.,-1.));+#16413 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16414 = ORIENTED_EDGE('',*,*,#16415,.T.);+#16415 = EDGE_CURVE('',#16381,#16416,#16418,.T.);+#16416 = VERTEX_POINT('',#16417);+#16417 = CARTESIAN_POINT('',(-0.159582228888,0.100608258929,0.975));+#16418 = SURFACE_CURVE('',#16419,(#16423,#16430),.PCURVE_S1.);+#16419 = LINE('',#16420,#16421);+#16420 = CARTESIAN_POINT('',(-0.159582228888,0.139670177641,0.975));+#16421 = VECTOR('',#16422,1.);+#16422 = DIRECTION('',(0.,-1.,0.));+#16423 = PCURVE('',#16389,#16424);+#16424 = DEFINITIONAL_REPRESENTATION('',(#16425),#16429);+#16425 = LINE('',#16426,#16427);+#16426 = CARTESIAN_POINT('',(0.,-4.E-02));+#16427 = VECTOR('',#16428,1.);+#16428 = DIRECTION('',(1.,0.));+#16429 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16430 = PCURVE('',#16431,#16436);+#16431 = PLANE('',#16432);+#16432 = AXIS2_PLACEMENT_3D('',#16433,#16434,#16435);+#16433 = CARTESIAN_POINT('',(-0.352414725167,-0.135097074963,0.975));+#16434 = DIRECTION('',(0.,0.,1.));+#16435 = DIRECTION('',(1.,0.,0.));+#16436 = DEFINITIONAL_REPRESENTATION('',(#16437),#16441);+#16437 = LINE('',#16438,#16439);+#16438 = CARTESIAN_POINT('',(0.19283249628,0.274767252604));+#16439 = VECTOR('',#16440,1.);+#16440 = DIRECTION('',(0.,-1.));+#16441 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16442 = ORIENTED_EDGE('',*,*,#16443,.F.);+#16443 = EDGE_CURVE('',#16444,#16416,#16446,.T.);+#16444 = VERTEX_POINT('',#16445);+#16445 = CARTESIAN_POINT('',(-0.159582228888,0.100608258929,1.015));+#16446 = SURFACE_CURVE('',#16447,(#16451,#16458),.PCURVE_S1.);+#16447 = LINE('',#16448,#16449);+#16448 = CARTESIAN_POINT('',(-0.159582228888,0.100608258929,1.015));+#16449 = VECTOR('',#16450,1.);+#16450 = DIRECTION('',(-0.,-0.,-1.));+#16451 = PCURVE('',#16389,#16452);+#16452 = DEFINITIONAL_REPRESENTATION('',(#16453),#16457);+#16453 = LINE('',#16454,#16455);+#16454 = CARTESIAN_POINT('',(3.90619187128E-02,0.));+#16455 = VECTOR('',#16456,1.);+#16456 = DIRECTION('',(0.,-1.));+#16457 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16458 = PCURVE('',#16459,#16466);+#16459 = SURFACE_OF_LINEAR_EXTRUSION('',#16460,#16464);+#16460 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16461,#16462,#16463),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16461 = CARTESIAN_POINT('',(-0.159582228888,0.100608258929,1.015));+#16462 = CARTESIAN_POINT('',(-0.177112455822,0.11185046968,1.015));+#16463 = CARTESIAN_POINT('',(-0.194737955729,0.117566848028,1.015));+#16464 = VECTOR('',#16465,1.);+#16465 = DIRECTION('',(0.,0.,1.));+#16466 = DEFINITIONAL_REPRESENTATION('',(#16467),#16471);+#16467 = LINE('',#16468,#16469);+#16468 = CARTESIAN_POINT('',(0.,0.));+#16469 = VECTOR('',#16470,1.);+#16470 = DIRECTION('',(0.,-1.));+#16471 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16472 = ORIENTED_EDGE('',*,*,#16473,.F.);+#16473 = EDGE_CURVE('',#16379,#16444,#16474,.T.);+#16474 = SURFACE_CURVE('',#16475,(#16479,#16486),.PCURVE_S1.);+#16475 = LINE('',#16476,#16477);+#16476 = CARTESIAN_POINT('',(-0.159582228888,0.139670177641,1.015));+#16477 = VECTOR('',#16478,1.);+#16478 = DIRECTION('',(0.,-1.,0.));+#16479 = PCURVE('',#16389,#16480);+#16480 = DEFINITIONAL_REPRESENTATION('',(#16481),#16485);+#16481 = LINE('',#16482,#16483);+#16482 = CARTESIAN_POINT('',(0.,0.));+#16483 = VECTOR('',#16484,1.);+#16484 = DIRECTION('',(1.,0.));+#16485 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16486 = PCURVE('',#16487,#16492);+#16487 = PLANE('',#16488);+#16488 = AXIS2_PLACEMENT_3D('',#16489,#16490,#16491);+#16489 = CARTESIAN_POINT('',(-0.352414725167,-0.135097074963,1.015));+#16490 = DIRECTION('',(0.,0.,1.));+#16491 = DIRECTION('',(1.,0.,0.));+#16492 = DEFINITIONAL_REPRESENTATION('',(#16493),#16497);+#16493 = LINE('',#16494,#16495);+#16494 = CARTESIAN_POINT('',(0.19283249628,0.274767252604));+#16495 = VECTOR('',#16496,1.);+#16496 = DIRECTION('',(0.,-1.));+#16497 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16498 = ADVANCED_FACE('',(#16499),#16459,.F.);+#16499 = FACE_BOUND('',#16500,.F.);+#16500 = EDGE_LOOP('',(#16501,#16502,#16525,#16555));+#16501 = ORIENTED_EDGE('',*,*,#16443,.T.);+#16502 = ORIENTED_EDGE('',*,*,#16503,.T.);+#16503 = EDGE_CURVE('',#16416,#16504,#16506,.T.);+#16504 = VERTEX_POINT('',#16505);+#16505 = CARTESIAN_POINT('',(-0.194737955729,0.117566848028,0.975));+#16506 = SURFACE_CURVE('',#16507,(#16511,#16518),.PCURVE_S1.);+#16507 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16508,#16509,#16510),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16508 = CARTESIAN_POINT('',(-0.159582228888,0.100608258929,0.975));+#16509 = CARTESIAN_POINT('',(-0.177112455822,0.11185046968,0.975));+#16510 = CARTESIAN_POINT('',(-0.194737955729,0.117566848028,0.975));+#16511 = PCURVE('',#16459,#16512);+#16512 = DEFINITIONAL_REPRESENTATION('',(#16513),#16517);+#16513 = LINE('',#16514,#16515);+#16514 = CARTESIAN_POINT('',(0.,-4.E-02));+#16515 = VECTOR('',#16516,1.);+#16516 = DIRECTION('',(1.,0.));+#16517 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16518 = PCURVE('',#16431,#16519);+#16519 = DEFINITIONAL_REPRESENTATION('',(#16520),#16524);+#16520 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16521,#16522,#16523),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16521 = CARTESIAN_POINT('',(0.19283249628,0.235705333891));+#16522 = CARTESIAN_POINT('',(0.175302269345,0.246947544643));+#16523 = CARTESIAN_POINT('',(0.157676769438,0.252663922991));+#16524 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16525 = ORIENTED_EDGE('',*,*,#16526,.F.);+#16526 = EDGE_CURVE('',#16527,#16504,#16529,.T.);+#16527 = VERTEX_POINT('',#16528);+#16528 = CARTESIAN_POINT('',(-0.194737955729,0.117566848028,1.015));+#16529 = SURFACE_CURVE('',#16530,(#16534,#16541),.PCURVE_S1.);+#16530 = LINE('',#16531,#16532);+#16531 = CARTESIAN_POINT('',(-0.194737955729,0.117566848028,1.015));+#16532 = VECTOR('',#16533,1.);+#16533 = DIRECTION('',(-0.,-0.,-1.));+#16534 = PCURVE('',#16459,#16535);+#16535 = DEFINITIONAL_REPRESENTATION('',(#16536),#16540);+#16536 = LINE('',#16537,#16538);+#16537 = CARTESIAN_POINT('',(1.,0.));+#16538 = VECTOR('',#16539,1.);+#16539 = DIRECTION('',(0.,-1.));+#16540 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16541 = PCURVE('',#16542,#16549);+#16542 = SURFACE_OF_LINEAR_EXTRUSION('',#16543,#16547);+#16543 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16544,#16545,#16546),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16544 = CARTESIAN_POINT('',(-0.194737955729,0.117566848028,1.015));+#16545 = CARTESIAN_POINT('',(-0.212363455636,0.123283226376,1.015));+#16546 = CARTESIAN_POINT('',(-0.230274774461,0.123283226376,1.015));+#16547 = VECTOR('',#16548,1.);+#16548 = DIRECTION('',(0.,0.,1.));+#16549 = DEFINITIONAL_REPRESENTATION('',(#16550),#16554);+#16550 = LINE('',#16551,#16552);+#16551 = CARTESIAN_POINT('',(0.,0.));+#16552 = VECTOR('',#16553,1.);+#16553 = DIRECTION('',(0.,-1.));+#16554 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16555 = ORIENTED_EDGE('',*,*,#16556,.F.);+#16556 = EDGE_CURVE('',#16444,#16527,#16557,.T.);+#16557 = SURFACE_CURVE('',#16558,(#16562,#16569),.PCURVE_S1.);+#16558 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16559,#16560,#16561),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16559 = CARTESIAN_POINT('',(-0.159582228888,0.100608258929,1.015));+#16560 = CARTESIAN_POINT('',(-0.177112455822,0.11185046968,1.015));+#16561 = CARTESIAN_POINT('',(-0.194737955729,0.117566848028,1.015));+#16562 = PCURVE('',#16459,#16563);+#16563 = DEFINITIONAL_REPRESENTATION('',(#16564),#16568);+#16564 = LINE('',#16565,#16566);+#16565 = CARTESIAN_POINT('',(0.,0.));+#16566 = VECTOR('',#16567,1.);+#16567 = DIRECTION('',(1.,0.));+#16568 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16569 = PCURVE('',#16487,#16570);+#16570 = DEFINITIONAL_REPRESENTATION('',(#16571),#16575);+#16571 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16572,#16573,#16574),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16572 = CARTESIAN_POINT('',(0.19283249628,0.235705333891));+#16573 = CARTESIAN_POINT('',(0.175302269345,0.246947544643));+#16574 = CARTESIAN_POINT('',(0.157676769438,0.252663922991));+#16575 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16576 = ADVANCED_FACE('',(#16577),#16542,.F.);+#16577 = FACE_BOUND('',#16578,.F.);+#16578 = EDGE_LOOP('',(#16579,#16580,#16603,#16633));+#16579 = ORIENTED_EDGE('',*,*,#16526,.T.);+#16580 = ORIENTED_EDGE('',*,*,#16581,.T.);+#16581 = EDGE_CURVE('',#16504,#16582,#16584,.T.);+#16582 = VERTEX_POINT('',#16583);+#16583 = CARTESIAN_POINT('',(-0.230274774461,0.123283226376,0.975));+#16584 = SURFACE_CURVE('',#16585,(#16589,#16596),.PCURVE_S1.);+#16585 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16586,#16587,#16588),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16586 = CARTESIAN_POINT('',(-0.194737955729,0.117566848028,0.975));+#16587 = CARTESIAN_POINT('',(-0.212363455636,0.123283226376,0.975));+#16588 = CARTESIAN_POINT('',(-0.230274774461,0.123283226376,0.975));+#16589 = PCURVE('',#16542,#16590);+#16590 = DEFINITIONAL_REPRESENTATION('',(#16591),#16595);+#16591 = LINE('',#16592,#16593);+#16592 = CARTESIAN_POINT('',(0.,-4.E-02));+#16593 = VECTOR('',#16594,1.);+#16594 = DIRECTION('',(1.,0.));+#16595 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16596 = PCURVE('',#16431,#16597);+#16597 = DEFINITIONAL_REPRESENTATION('',(#16598),#16602);+#16598 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16599,#16600,#16601),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16599 = CARTESIAN_POINT('',(0.157676769438,0.252663922991));+#16600 = CARTESIAN_POINT('',(0.140051269531,0.258380301339));+#16601 = CARTESIAN_POINT('',(0.122139950707,0.258380301339));+#16602 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16603 = ORIENTED_EDGE('',*,*,#16604,.F.);+#16604 = EDGE_CURVE('',#16605,#16582,#16607,.T.);+#16605 = VERTEX_POINT('',#16606);+#16606 = CARTESIAN_POINT('',(-0.230274774461,0.123283226376,1.015));+#16607 = SURFACE_CURVE('',#16608,(#16612,#16619),.PCURVE_S1.);+#16608 = LINE('',#16609,#16610);+#16609 = CARTESIAN_POINT('',(-0.230274774461,0.123283226376,1.015));+#16610 = VECTOR('',#16611,1.);+#16611 = DIRECTION('',(-0.,-0.,-1.));+#16612 = PCURVE('',#16542,#16613);+#16613 = DEFINITIONAL_REPRESENTATION('',(#16614),#16618);+#16614 = LINE('',#16615,#16616);+#16615 = CARTESIAN_POINT('',(1.,0.));+#16616 = VECTOR('',#16617,1.);+#16617 = DIRECTION('',(0.,-1.));+#16618 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16619 = PCURVE('',#16620,#16627);+#16620 = SURFACE_OF_LINEAR_EXTRUSION('',#16621,#16625);+#16621 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16622,#16623,#16624),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16622 = CARTESIAN_POINT('',(-0.230274774461,0.123283226376,1.015));+#16623 = CARTESIAN_POINT('',(-0.257522844587,0.123283226376,1.015));+#16624 = CARTESIAN_POINT('',(-0.273338158017,0.110611921038,1.015));+#16625 = VECTOR('',#16626,1.);+#16626 = DIRECTION('',(0.,0.,1.));+#16627 = DEFINITIONAL_REPRESENTATION('',(#16628),#16632);+#16628 = LINE('',#16629,#16630);+#16629 = CARTESIAN_POINT('',(0.,0.));+#16630 = VECTOR('',#16631,1.);+#16631 = DIRECTION('',(0.,-1.));+#16632 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16633 = ORIENTED_EDGE('',*,*,#16634,.F.);+#16634 = EDGE_CURVE('',#16527,#16605,#16635,.T.);+#16635 = SURFACE_CURVE('',#16636,(#16640,#16647),.PCURVE_S1.);+#16636 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16637,#16638,#16639),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16637 = CARTESIAN_POINT('',(-0.194737955729,0.117566848028,1.015));+#16638 = CARTESIAN_POINT('',(-0.212363455636,0.123283226376,1.015));+#16639 = CARTESIAN_POINT('',(-0.230274774461,0.123283226376,1.015));+#16640 = PCURVE('',#16542,#16641);+#16641 = DEFINITIONAL_REPRESENTATION('',(#16642),#16646);+#16642 = LINE('',#16643,#16644);+#16643 = CARTESIAN_POINT('',(0.,0.));+#16644 = VECTOR('',#16645,1.);+#16645 = DIRECTION('',(1.,0.));+#16646 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16647 = PCURVE('',#16487,#16648);+#16648 = DEFINITIONAL_REPRESENTATION('',(#16649),#16653);+#16649 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16650,#16651,#16652),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16650 = CARTESIAN_POINT('',(0.157676769438,0.252663922991));+#16651 = CARTESIAN_POINT('',(0.140051269531,0.258380301339));+#16652 = CARTESIAN_POINT('',(0.122139950707,0.258380301339));+#16653 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16654 = ADVANCED_FACE('',(#16655),#16620,.F.);+#16655 = FACE_BOUND('',#16656,.F.);+#16656 = EDGE_LOOP('',(#16657,#16658,#16681,#16711));+#16657 = ORIENTED_EDGE('',*,*,#16604,.T.);+#16658 = ORIENTED_EDGE('',*,*,#16659,.T.);+#16659 = EDGE_CURVE('',#16582,#16660,#16662,.T.);+#16660 = VERTEX_POINT('',#16661);+#16661 = CARTESIAN_POINT('',(-0.273338158017,0.110611921038,0.975));+#16662 = SURFACE_CURVE('',#16663,(#16667,#16674),.PCURVE_S1.);+#16663 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16664,#16665,#16666),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16664 = CARTESIAN_POINT('',(-0.230274774461,0.123283226376,0.975));+#16665 = CARTESIAN_POINT('',(-0.257522844587,0.123283226376,0.975));+#16666 = CARTESIAN_POINT('',(-0.273338158017,0.110611921038,0.975));+#16667 = PCURVE('',#16620,#16668);+#16668 = DEFINITIONAL_REPRESENTATION('',(#16669),#16673);+#16669 = LINE('',#16670,#16671);+#16670 = CARTESIAN_POINT('',(0.,-4.E-02));+#16671 = VECTOR('',#16672,1.);+#16672 = DIRECTION('',(1.,0.));+#16673 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16674 = PCURVE('',#16431,#16675);+#16675 = DEFINITIONAL_REPRESENTATION('',(#16676),#16680);+#16676 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16677,#16678,#16679),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16677 = CARTESIAN_POINT('',(0.122139950707,0.258380301339));+#16678 = CARTESIAN_POINT('',(9.489188058036E-02,0.258380301339));+#16679 = CARTESIAN_POINT('',(7.90765671503E-02,0.245708996001));+#16680 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16681 = ORIENTED_EDGE('',*,*,#16682,.F.);+#16682 = EDGE_CURVE('',#16683,#16660,#16685,.T.);+#16683 = VERTEX_POINT('',#16684);+#16684 = CARTESIAN_POINT('',(-0.273338158017,0.110611921038,1.015));+#16685 = SURFACE_CURVE('',#16686,(#16690,#16697),.PCURVE_S1.);+#16686 = LINE('',#16687,#16688);+#16687 = CARTESIAN_POINT('',(-0.273338158017,0.110611921038,1.015));+#16688 = VECTOR('',#16689,1.);+#16689 = DIRECTION('',(-0.,-0.,-1.));+#16690 = PCURVE('',#16620,#16691);+#16691 = DEFINITIONAL_REPRESENTATION('',(#16692),#16696);+#16692 = LINE('',#16693,#16694);+#16693 = CARTESIAN_POINT('',(1.,0.));+#16694 = VECTOR('',#16695,1.);+#16695 = DIRECTION('',(0.,-1.));+#16696 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16697 = PCURVE('',#16698,#16705);+#16698 = SURFACE_OF_LINEAR_EXTRUSION('',#16699,#16703);+#16699 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16700,#16701,#16702),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16700 = CARTESIAN_POINT('',(-0.273338158017,0.110611921038,1.015));+#16701 = CARTESIAN_POINT('',(-0.289153471447,9.79406156994E-02,1.015));+#16702 = CARTESIAN_POINT('',(-0.289153471447,7.640892392113E-02,1.015));+#16703 = VECTOR('',#16704,1.);+#16704 = DIRECTION('',(0.,0.,1.));+#16705 = DEFINITIONAL_REPRESENTATION('',(#16706),#16710);+#16706 = LINE('',#16707,#16708);+#16707 = CARTESIAN_POINT('',(0.,0.));+#16708 = VECTOR('',#16709,1.);+#16709 = DIRECTION('',(0.,-1.));+#16710 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16711 = ORIENTED_EDGE('',*,*,#16712,.F.);+#16712 = EDGE_CURVE('',#16605,#16683,#16713,.T.);+#16713 = SURFACE_CURVE('',#16714,(#16718,#16725),.PCURVE_S1.);+#16714 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16715,#16716,#16717),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16715 = CARTESIAN_POINT('',(-0.230274774461,0.123283226376,1.015));+#16716 = CARTESIAN_POINT('',(-0.257522844587,0.123283226376,1.015));+#16717 = CARTESIAN_POINT('',(-0.273338158017,0.110611921038,1.015));+#16718 = PCURVE('',#16620,#16719);+#16719 = DEFINITIONAL_REPRESENTATION('',(#16720),#16724);+#16720 = LINE('',#16721,#16722);+#16721 = CARTESIAN_POINT('',(0.,0.));+#16722 = VECTOR('',#16723,1.);+#16723 = DIRECTION('',(1.,0.));+#16724 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16725 = PCURVE('',#16487,#16726);+#16726 = DEFINITIONAL_REPRESENTATION('',(#16727),#16731);+#16727 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16728,#16729,#16730),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16728 = CARTESIAN_POINT('',(0.122139950707,0.258380301339));+#16729 = CARTESIAN_POINT('',(9.489188058036E-02,0.258380301339));+#16730 = CARTESIAN_POINT('',(7.90765671503E-02,0.245708996001));+#16731 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16732 = ADVANCED_FACE('',(#16733),#16698,.F.);+#16733 = FACE_BOUND('',#16734,.F.);+#16734 = EDGE_LOOP('',(#16735,#16736,#16759,#16789));+#16735 = ORIENTED_EDGE('',*,*,#16682,.T.);+#16736 = ORIENTED_EDGE('',*,*,#16737,.T.);+#16737 = EDGE_CURVE('',#16660,#16738,#16740,.T.);+#16738 = VERTEX_POINT('',#16739);+#16739 = CARTESIAN_POINT('',(-0.289153471447,7.640892392113E-02,0.975));+#16740 = SURFACE_CURVE('',#16741,(#16745,#16752),.PCURVE_S1.);+#16741 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16742,#16743,#16744),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16742 = CARTESIAN_POINT('',(-0.273338158017,0.110611921038,0.975));+#16743 = CARTESIAN_POINT('',(-0.289153471447,9.79406156994E-02,0.975));+#16744 = CARTESIAN_POINT('',(-0.289153471447,7.640892392113E-02,0.975));+#16745 = PCURVE('',#16698,#16746);+#16746 = DEFINITIONAL_REPRESENTATION('',(#16747),#16751);+#16747 = LINE('',#16748,#16749);+#16748 = CARTESIAN_POINT('',(0.,-4.E-02));+#16749 = VECTOR('',#16750,1.);+#16750 = DIRECTION('',(1.,0.));+#16751 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16752 = PCURVE('',#16431,#16753);+#16753 = DEFINITIONAL_REPRESENTATION('',(#16754),#16758);+#16754 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16755,#16756,#16757),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16755 = CARTESIAN_POINT('',(7.90765671503E-02,0.245708996001));+#16756 = CARTESIAN_POINT('',(6.326125372024E-02,0.233037690662));+#16757 = CARTESIAN_POINT('',(6.326125372024E-02,0.211505998884));+#16758 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16759 = ORIENTED_EDGE('',*,*,#16760,.F.);+#16760 = EDGE_CURVE('',#16761,#16738,#16763,.T.);+#16761 = VERTEX_POINT('',#16762);+#16762 = CARTESIAN_POINT('',(-0.289153471447,7.640892392113E-02,1.015));+#16763 = SURFACE_CURVE('',#16764,(#16768,#16775),.PCURVE_S1.);+#16764 = LINE('',#16765,#16766);+#16765 = CARTESIAN_POINT('',(-0.289153471447,7.640892392113E-02,1.015));+#16766 = VECTOR('',#16767,1.);+#16767 = DIRECTION('',(-0.,-0.,-1.));+#16768 = PCURVE('',#16698,#16769);+#16769 = DEFINITIONAL_REPRESENTATION('',(#16770),#16774);+#16770 = LINE('',#16771,#16772);+#16771 = CARTESIAN_POINT('',(1.,0.));+#16772 = VECTOR('',#16773,1.);+#16773 = DIRECTION('',(0.,-1.));+#16774 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16775 = PCURVE('',#16776,#16783);+#16776 = SURFACE_OF_LINEAR_EXTRUSION('',#16777,#16781);+#16777 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16778,#16779,#16780),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16778 = CARTESIAN_POINT('',(-0.289153471447,7.640892392113E-02,1.015));+#16779 = CARTESIAN_POINT('',(-0.289153471447,5.754487537202E-02,1.015));+#16780 = CARTESIAN_POINT('',(-0.278768717448,4.763648623512E-02,1.015));+#16781 = VECTOR('',#16782,1.);+#16782 = DIRECTION('',(0.,0.,1.));+#16783 = DEFINITIONAL_REPRESENTATION('',(#16784),#16788);+#16784 = LINE('',#16785,#16786);+#16785 = CARTESIAN_POINT('',(0.,0.));+#16786 = VECTOR('',#16787,1.);+#16787 = DIRECTION('',(0.,-1.));+#16788 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16789 = ORIENTED_EDGE('',*,*,#16790,.F.);+#16790 = EDGE_CURVE('',#16683,#16761,#16791,.T.);+#16791 = SURFACE_CURVE('',#16792,(#16796,#16803),.PCURVE_S1.);+#16792 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16793,#16794,#16795),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16793 = CARTESIAN_POINT('',(-0.273338158017,0.110611921038,1.015));+#16794 = CARTESIAN_POINT('',(-0.289153471447,9.79406156994E-02,1.015));+#16795 = CARTESIAN_POINT('',(-0.289153471447,7.640892392113E-02,1.015));+#16796 = PCURVE('',#16698,#16797);+#16797 = DEFINITIONAL_REPRESENTATION('',(#16798),#16802);+#16798 = LINE('',#16799,#16800);+#16799 = CARTESIAN_POINT('',(0.,0.));+#16800 = VECTOR('',#16801,1.);+#16801 = DIRECTION('',(1.,0.));+#16802 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16803 = PCURVE('',#16487,#16804);+#16804 = DEFINITIONAL_REPRESENTATION('',(#16805),#16809);+#16805 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16806,#16807,#16808),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16806 = CARTESIAN_POINT('',(7.90765671503E-02,0.245708996001));+#16807 = CARTESIAN_POINT('',(6.326125372024E-02,0.233037690662));+#16808 = CARTESIAN_POINT('',(6.326125372024E-02,0.211505998884));+#16809 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16810 = ADVANCED_FACE('',(#16811),#16776,.F.);+#16811 = FACE_BOUND('',#16812,.F.);+#16812 = EDGE_LOOP('',(#16813,#16814,#16837,#16867));+#16813 = ORIENTED_EDGE('',*,*,#16760,.T.);+#16814 = ORIENTED_EDGE('',*,*,#16815,.T.);+#16815 = EDGE_CURVE('',#16738,#16816,#16818,.T.);+#16816 = VERTEX_POINT('',#16817);+#16817 = CARTESIAN_POINT('',(-0.278768717448,4.763648623512E-02,0.975));+#16818 = SURFACE_CURVE('',#16819,(#16823,#16830),.PCURVE_S1.);+#16819 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16820,#16821,#16822),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16820 = CARTESIAN_POINT('',(-0.289153471447,7.640892392113E-02,0.975));+#16821 = CARTESIAN_POINT('',(-0.289153471447,5.754487537202E-02,0.975));+#16822 = CARTESIAN_POINT('',(-0.278768717448,4.763648623512E-02,0.975));+#16823 = PCURVE('',#16776,#16824);+#16824 = DEFINITIONAL_REPRESENTATION('',(#16825),#16829);+#16825 = LINE('',#16826,#16827);+#16826 = CARTESIAN_POINT('',(0.,-4.E-02));+#16827 = VECTOR('',#16828,1.);+#16828 = DIRECTION('',(1.,0.));+#16829 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16830 = PCURVE('',#16431,#16831);+#16831 = DEFINITIONAL_REPRESENTATION('',(#16832),#16836);+#16832 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16833,#16834,#16835),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16833 = CARTESIAN_POINT('',(6.326125372024E-02,0.211505998884));+#16834 = CARTESIAN_POINT('',(6.326125372024E-02,0.192641950335));+#16835 = CARTESIAN_POINT('',(7.364600771949E-02,0.182733561198));+#16836 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16837 = ORIENTED_EDGE('',*,*,#16838,.F.);+#16838 = EDGE_CURVE('',#16839,#16816,#16841,.T.);+#16839 = VERTEX_POINT('',#16840);+#16840 = CARTESIAN_POINT('',(-0.278768717448,4.763648623512E-02,1.015));+#16841 = SURFACE_CURVE('',#16842,(#16846,#16853),.PCURVE_S1.);+#16842 = LINE('',#16843,#16844);+#16843 = CARTESIAN_POINT('',(-0.278768717448,4.763648623512E-02,1.015));+#16844 = VECTOR('',#16845,1.);+#16845 = DIRECTION('',(-0.,-0.,-1.));+#16846 = PCURVE('',#16776,#16847);+#16847 = DEFINITIONAL_REPRESENTATION('',(#16848),#16852);+#16848 = LINE('',#16849,#16850);+#16849 = CARTESIAN_POINT('',(1.,0.));+#16850 = VECTOR('',#16851,1.);+#16851 = DIRECTION('',(0.,-1.));+#16852 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16853 = PCURVE('',#16854,#16861);+#16854 = SURFACE_OF_LINEAR_EXTRUSION('',#16855,#16859);+#16855 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16856,#16857,#16858),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16856 = CARTESIAN_POINT('',(-0.278768717448,4.763648623512E-02,1.015));+#16857 = CARTESIAN_POINT('',(-0.268383963449,3.772809709821E-02,1.015));+#16858 = CARTESIAN_POINT('',(-0.239992617653,3.10589890253E-02,1.015));+#16859 = VECTOR('',#16860,1.);+#16860 = DIRECTION('',(0.,0.,1.));+#16861 = DEFINITIONAL_REPRESENTATION('',(#16862),#16866);+#16862 = LINE('',#16863,#16864);+#16863 = CARTESIAN_POINT('',(0.,0.));+#16864 = VECTOR('',#16865,1.);+#16865 = DIRECTION('',(0.,-1.));+#16866 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16867 = ORIENTED_EDGE('',*,*,#16868,.F.);+#16868 = EDGE_CURVE('',#16761,#16839,#16869,.T.);+#16869 = SURFACE_CURVE('',#16870,(#16874,#16881),.PCURVE_S1.);+#16870 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16871,#16872,#16873),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16871 = CARTESIAN_POINT('',(-0.289153471447,7.640892392113E-02,1.015));+#16872 = CARTESIAN_POINT('',(-0.289153471447,5.754487537202E-02,1.015));+#16873 = CARTESIAN_POINT('',(-0.278768717448,4.763648623512E-02,1.015));+#16874 = PCURVE('',#16776,#16875);+#16875 = DEFINITIONAL_REPRESENTATION('',(#16876),#16880);+#16876 = LINE('',#16877,#16878);+#16877 = CARTESIAN_POINT('',(0.,0.));+#16878 = VECTOR('',#16879,1.);+#16879 = DIRECTION('',(1.,0.));+#16880 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16881 = PCURVE('',#16487,#16882);+#16882 = DEFINITIONAL_REPRESENTATION('',(#16883),#16887);+#16883 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16884,#16885,#16886),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16884 = CARTESIAN_POINT('',(6.326125372024E-02,0.211505998884));+#16885 = CARTESIAN_POINT('',(6.326125372024E-02,0.192641950335));+#16886 = CARTESIAN_POINT('',(7.364600771949E-02,0.182733561198));+#16887 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16888 = ADVANCED_FACE('',(#16889),#16854,.F.);+#16889 = FACE_BOUND('',#16890,.F.);+#16890 = EDGE_LOOP('',(#16891,#16892,#16915,#16943));+#16891 = ORIENTED_EDGE('',*,*,#16838,.T.);+#16892 = ORIENTED_EDGE('',*,*,#16893,.T.);+#16893 = EDGE_CURVE('',#16816,#16894,#16896,.T.);+#16894 = VERTEX_POINT('',#16895);+#16895 = CARTESIAN_POINT('',(-0.239992617653,3.10589890253E-02,0.975));+#16896 = SURFACE_CURVE('',#16897,(#16901,#16908),.PCURVE_S1.);+#16897 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16898,#16899,#16900),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16898 = CARTESIAN_POINT('',(-0.278768717448,4.763648623512E-02,0.975));+#16899 = CARTESIAN_POINT('',(-0.268383963449,3.772809709821E-02,0.975));+#16900 = CARTESIAN_POINT('',(-0.239992617653,3.10589890253E-02,0.975));+#16901 = PCURVE('',#16854,#16902);+#16902 = DEFINITIONAL_REPRESENTATION('',(#16903),#16907);+#16903 = LINE('',#16904,#16905);+#16904 = CARTESIAN_POINT('',(0.,-4.E-02));+#16905 = VECTOR('',#16906,1.);+#16906 = DIRECTION('',(1.,0.));+#16907 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16908 = PCURVE('',#16431,#16909);+#16909 = DEFINITIONAL_REPRESENTATION('',(#16910),#16914);+#16910 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16911,#16912,#16913),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16911 = CARTESIAN_POINT('',(7.364600771949E-02,0.182733561198));+#16912 = CARTESIAN_POINT('',(8.403076171875E-02,0.172825172061));+#16913 = CARTESIAN_POINT('',(0.112422107515,0.166156063988));+#16914 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16915 = ORIENTED_EDGE('',*,*,#16916,.F.);+#16916 = EDGE_CURVE('',#16917,#16894,#16919,.T.);+#16917 = VERTEX_POINT('',#16918);+#16918 = CARTESIAN_POINT('',(-0.239992617653,3.10589890253E-02,1.015));+#16919 = SURFACE_CURVE('',#16920,(#16924,#16931),.PCURVE_S1.);+#16920 = LINE('',#16921,#16922);+#16921 = CARTESIAN_POINT('',(-0.239992617653,3.10589890253E-02,1.015));+#16922 = VECTOR('',#16923,1.);+#16923 = DIRECTION('',(-0.,-0.,-1.));+#16924 = PCURVE('',#16854,#16925);+#16925 = DEFINITIONAL_REPRESENTATION('',(#16926),#16930);+#16926 = LINE('',#16927,#16928);+#16927 = CARTESIAN_POINT('',(1.,0.));+#16928 = VECTOR('',#16929,1.);+#16929 = DIRECTION('',(0.,-1.));+#16930 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16931 = PCURVE('',#16932,#16937);+#16932 = PLANE('',#16933);+#16933 = AXIS2_PLACEMENT_3D('',#16934,#16935,#16936);+#16934 = CARTESIAN_POINT('',(-0.239992617653,3.10589890253E-02,1.015));+#16935 = DIRECTION('',(-0.220825652598,-0.975313298974,0.));+#16936 = DIRECTION('',(0.975313298974,-0.220825652598,0.));+#16937 = DEFINITIONAL_REPRESENTATION('',(#16938),#16942);+#16938 = LINE('',#16939,#16940);+#16939 = CARTESIAN_POINT('',(0.,0.));+#16940 = VECTOR('',#16941,1.);+#16941 = DIRECTION('',(0.,-1.));+#16942 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16943 = ORIENTED_EDGE('',*,*,#16944,.F.);+#16944 = EDGE_CURVE('',#16839,#16917,#16945,.T.);+#16945 = SURFACE_CURVE('',#16946,(#16950,#16957),.PCURVE_S1.);+#16946 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16947,#16948,#16949),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16947 = CARTESIAN_POINT('',(-0.278768717448,4.763648623512E-02,1.015));+#16948 = CARTESIAN_POINT('',(-0.268383963449,3.772809709821E-02,1.015));+#16949 = CARTESIAN_POINT('',(-0.239992617653,3.10589890253E-02,1.015));+#16950 = PCURVE('',#16854,#16951);+#16951 = DEFINITIONAL_REPRESENTATION('',(#16952),#16956);+#16952 = LINE('',#16953,#16954);+#16953 = CARTESIAN_POINT('',(0.,0.));+#16954 = VECTOR('',#16955,1.);+#16955 = DIRECTION('',(1.,0.));+#16956 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16957 = PCURVE('',#16487,#16958);+#16958 = DEFINITIONAL_REPRESENTATION('',(#16959),#16963);+#16959 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16960,#16961,#16962),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16960 = CARTESIAN_POINT('',(7.364600771949E-02,0.182733561198));+#16961 = CARTESIAN_POINT('',(8.403076171875E-02,0.172825172061));+#16962 = CARTESIAN_POINT('',(0.112422107515,0.166156063988));+#16963 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16964 = ADVANCED_FACE('',(#16965),#16932,.F.);+#16965 = FACE_BOUND('',#16966,.F.);+#16966 = EDGE_LOOP('',(#16967,#16968,#16991,#17021));+#16967 = ORIENTED_EDGE('',*,*,#16916,.T.);+#16968 = ORIENTED_EDGE('',*,*,#16969,.T.);+#16969 = EDGE_CURVE('',#16894,#16970,#16972,.T.);+#16970 = VERTEX_POINT('',#16971);+#16971 = CARTESIAN_POINT('',(-0.219794747489,2.648588634673E-02,0.975));+#16972 = SURFACE_CURVE('',#16973,(#16977,#16984),.PCURVE_S1.);+#16973 = LINE('',#16974,#16975);+#16974 = CARTESIAN_POINT('',(-0.239992617653,3.10589890253E-02,0.975));+#16975 = VECTOR('',#16976,1.);+#16976 = DIRECTION('',(0.975313298974,-0.220825652598,0.));+#16977 = PCURVE('',#16932,#16978);+#16978 = DEFINITIONAL_REPRESENTATION('',(#16979),#16983);+#16979 = LINE('',#16980,#16981);+#16980 = CARTESIAN_POINT('',(0.,-4.E-02));+#16981 = VECTOR('',#16982,1.);+#16982 = DIRECTION('',(1.,0.));+#16983 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16984 = PCURVE('',#16431,#16985);+#16985 = DEFINITIONAL_REPRESENTATION('',(#16986),#16990);+#16986 = LINE('',#16987,#16988);+#16987 = CARTESIAN_POINT('',(0.112422107515,0.166156063988));+#16988 = VECTOR('',#16989,1.);+#16989 = DIRECTION('',(0.975313298974,-0.220825652598));+#16990 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16991 = ORIENTED_EDGE('',*,*,#16992,.F.);+#16992 = EDGE_CURVE('',#16993,#16970,#16995,.T.);+#16993 = VERTEX_POINT('',#16994);+#16994 = CARTESIAN_POINT('',(-0.219794747489,2.648588634673E-02,1.015));+#16995 = SURFACE_CURVE('',#16996,(#17000,#17007),.PCURVE_S1.);+#16996 = LINE('',#16997,#16998);+#16997 = CARTESIAN_POINT('',(-0.219794747489,2.648588634673E-02,1.015));+#16998 = VECTOR('',#16999,1.);+#16999 = DIRECTION('',(-0.,-0.,-1.));+#17000 = PCURVE('',#16932,#17001);+#17001 = DEFINITIONAL_REPRESENTATION('',(#17002),#17006);+#17002 = LINE('',#17003,#17004);+#17003 = CARTESIAN_POINT('',(2.070910976498E-02,0.));+#17004 = VECTOR('',#17005,1.);+#17005 = DIRECTION('',(0.,-1.));+#17006 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17007 = PCURVE('',#17008,#17015);+#17008 = SURFACE_OF_LINEAR_EXTRUSION('',#17009,#17013);+#17009 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17010,#17011,#17012),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17010 = CARTESIAN_POINT('',(-0.219794747489,2.648588634673E-02,1.015));+#17011 = CARTESIAN_POINT('',(-0.179780099051,1.714913504464E-02,1.015));+#17012 = CARTESIAN_POINT('',(-0.161487688337,-2.858189174107E-03,1.015)+ );+#17013 = VECTOR('',#17014,1.);+#17014 = DIRECTION('',(0.,0.,1.));+#17015 = DEFINITIONAL_REPRESENTATION('',(#17016),#17020);+#17016 = LINE('',#17017,#17018);+#17017 = CARTESIAN_POINT('',(0.,0.));+#17018 = VECTOR('',#17019,1.);+#17019 = DIRECTION('',(0.,-1.));+#17020 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17021 = ORIENTED_EDGE('',*,*,#17022,.F.);+#17022 = EDGE_CURVE('',#16917,#16993,#17023,.T.);+#17023 = SURFACE_CURVE('',#17024,(#17028,#17035),.PCURVE_S1.);+#17024 = LINE('',#17025,#17026);+#17025 = CARTESIAN_POINT('',(-0.239992617653,3.10589890253E-02,1.015));+#17026 = VECTOR('',#17027,1.);+#17027 = DIRECTION('',(0.975313298974,-0.220825652598,0.));+#17028 = PCURVE('',#16932,#17029);+#17029 = DEFINITIONAL_REPRESENTATION('',(#17030),#17034);+#17030 = LINE('',#17031,#17032);+#17031 = CARTESIAN_POINT('',(0.,0.));+#17032 = VECTOR('',#17033,1.);+#17033 = DIRECTION('',(1.,0.));+#17034 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17035 = PCURVE('',#16487,#17036);+#17036 = DEFINITIONAL_REPRESENTATION('',(#17037),#17041);+#17037 = LINE('',#17038,#17039);+#17038 = CARTESIAN_POINT('',(0.112422107515,0.166156063988));+#17039 = VECTOR('',#17040,1.);+#17040 = DIRECTION('',(0.975313298974,-0.220825652598));+#17041 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17042 = ADVANCED_FACE('',(#17043),#17008,.F.);+#17043 = FACE_BOUND('',#17044,.F.);+#17044 = EDGE_LOOP('',(#17045,#17046,#17069,#17099));+#17045 = ORIENTED_EDGE('',*,*,#16992,.T.);+#17046 = ORIENTED_EDGE('',*,*,#17047,.T.);+#17047 = EDGE_CURVE('',#16970,#17048,#17050,.T.);+#17048 = VERTEX_POINT('',#17049);+#17049 = CARTESIAN_POINT('',(-0.161487688337,-2.858189174107E-03,0.975)+ );+#17050 = SURFACE_CURVE('',#17051,(#17055,#17062),.PCURVE_S1.);+#17051 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17052,#17053,#17054),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17052 = CARTESIAN_POINT('',(-0.219794747489,2.648588634673E-02,0.975));+#17053 = CARTESIAN_POINT('',(-0.179780099051,1.714913504464E-02,0.975));+#17054 = CARTESIAN_POINT('',(-0.161487688337,-2.858189174107E-03,0.975)+ );+#17055 = PCURVE('',#17008,#17056);+#17056 = DEFINITIONAL_REPRESENTATION('',(#17057),#17061);+#17057 = LINE('',#17058,#17059);+#17058 = CARTESIAN_POINT('',(0.,-4.E-02));+#17059 = VECTOR('',#17060,1.);+#17060 = DIRECTION('',(1.,0.));+#17061 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17062 = PCURVE('',#16431,#17063);+#17063 = DEFINITIONAL_REPRESENTATION('',(#17064),#17068);+#17064 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17065,#17066,#17067),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17065 = CARTESIAN_POINT('',(0.132619977679,0.16158296131));+#17066 = CARTESIAN_POINT('',(0.172634626116,0.152246210007));+#17067 = CARTESIAN_POINT('',(0.19092703683,0.132238885789));+#17068 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17069 = ORIENTED_EDGE('',*,*,#17070,.F.);+#17070 = EDGE_CURVE('',#17071,#17048,#17073,.T.);+#17071 = VERTEX_POINT('',#17072);+#17072 = CARTESIAN_POINT('',(-0.161487688337,-2.858189174107E-03,1.015)+ );+#17073 = SURFACE_CURVE('',#17074,(#17078,#17085),.PCURVE_S1.);+#17074 = LINE('',#17075,#17076);+#17075 = CARTESIAN_POINT('',(-0.161487688337,-2.858189174107E-03,1.015)+ );+#17076 = VECTOR('',#17077,1.);+#17077 = DIRECTION('',(-0.,-0.,-1.));+#17078 = PCURVE('',#17008,#17079);+#17079 = DEFINITIONAL_REPRESENTATION('',(#17080),#17084);+#17080 = LINE('',#17081,#17082);+#17081 = CARTESIAN_POINT('',(1.,0.));+#17082 = VECTOR('',#17083,1.);+#17083 = DIRECTION('',(0.,-1.));+#17084 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17085 = PCURVE('',#17086,#17093);+#17086 = SURFACE_OF_LINEAR_EXTRUSION('',#17087,#17091);+#17087 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17088,#17089,#17090),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17088 = CARTESIAN_POINT('',(-0.161487688337,-2.858189174107E-03,1.015)+ );+#17089 = CARTESIAN_POINT('',(-0.143195277623,-2.286551339286E-02,1.015)+ );+#17090 = CARTESIAN_POINT('',(-0.143195277623,-5.735432942708E-02,1.015)+ );+#17091 = VECTOR('',#17092,1.);+#17092 = DIRECTION('',(0.,0.,1.));+#17093 = DEFINITIONAL_REPRESENTATION('',(#17094),#17098);+#17094 = LINE('',#17095,#17096);+#17095 = CARTESIAN_POINT('',(0.,0.));+#17096 = VECTOR('',#17097,1.);+#17097 = DIRECTION('',(0.,-1.));+#17098 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17099 = ORIENTED_EDGE('',*,*,#17100,.F.);+#17100 = EDGE_CURVE('',#16993,#17071,#17101,.T.);+#17101 = SURFACE_CURVE('',#17102,(#17106,#17113),.PCURVE_S1.);+#17102 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17103,#17104,#17105),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17103 = CARTESIAN_POINT('',(-0.219794747489,2.648588634673E-02,1.015));+#17104 = CARTESIAN_POINT('',(-0.179780099051,1.714913504464E-02,1.015));+#17105 = CARTESIAN_POINT('',(-0.161487688337,-2.858189174107E-03,1.015)+ );+#17106 = PCURVE('',#17008,#17107);+#17107 = DEFINITIONAL_REPRESENTATION('',(#17108),#17112);+#17108 = LINE('',#17109,#17110);+#17109 = CARTESIAN_POINT('',(0.,0.));+#17110 = VECTOR('',#17111,1.);+#17111 = DIRECTION('',(1.,0.));+#17112 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17113 = PCURVE('',#16487,#17114);+#17114 = DEFINITIONAL_REPRESENTATION('',(#17115),#17119);+#17115 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17116,#17117,#17118),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17116 = CARTESIAN_POINT('',(0.132619977679,0.16158296131));+#17117 = CARTESIAN_POINT('',(0.172634626116,0.152246210007));+#17118 = CARTESIAN_POINT('',(0.19092703683,0.132238885789));+#17119 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17120 = ADVANCED_FACE('',(#17121),#17086,.F.);+#17121 = FACE_BOUND('',#17122,.F.);+#17122 = EDGE_LOOP('',(#17123,#17124,#17147,#17177));+#17123 = ORIENTED_EDGE('',*,*,#17070,.T.);+#17124 = ORIENTED_EDGE('',*,*,#17125,.T.);+#17125 = EDGE_CURVE('',#17048,#17126,#17128,.T.);+#17126 = VERTEX_POINT('',#17127);+#17127 = CARTESIAN_POINT('',(-0.143195277623,-5.735432942708E-02,0.975)+ );+#17128 = SURFACE_CURVE('',#17129,(#17133,#17140),.PCURVE_S1.);+#17129 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17130,#17131,#17132),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17130 = CARTESIAN_POINT('',(-0.161487688337,-2.858189174107E-03,0.975)+ );+#17131 = CARTESIAN_POINT('',(-0.143195277623,-2.286551339286E-02,0.975)+ );+#17132 = CARTESIAN_POINT('',(-0.143195277623,-5.735432942708E-02,0.975)+ );+#17133 = PCURVE('',#17086,#17134);+#17134 = DEFINITIONAL_REPRESENTATION('',(#17135),#17139);+#17135 = LINE('',#17136,#17137);+#17136 = CARTESIAN_POINT('',(0.,-4.E-02));+#17137 = VECTOR('',#17138,1.);+#17138 = DIRECTION('',(1.,0.));+#17139 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17140 = PCURVE('',#16431,#17141);+#17141 = DEFINITIONAL_REPRESENTATION('',(#17142),#17146);+#17142 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17143,#17144,#17145),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17143 = CARTESIAN_POINT('',(0.19092703683,0.132238885789));+#17144 = CARTESIAN_POINT('',(0.209219447545,0.11223156157));+#17145 = CARTESIAN_POINT('',(0.209219447545,7.774274553571E-02));+#17146 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17147 = ORIENTED_EDGE('',*,*,#17148,.F.);+#17148 = EDGE_CURVE('',#17149,#17126,#17151,.T.);+#17149 = VERTEX_POINT('',#17150);+#17150 = CARTESIAN_POINT('',(-0.143195277623,-5.735432942708E-02,1.015)+ );+#17151 = SURFACE_CURVE('',#17152,(#17156,#17163),.PCURVE_S1.);+#17152 = LINE('',#17153,#17154);+#17153 = CARTESIAN_POINT('',(-0.143195277623,-5.735432942708E-02,1.015)+ );+#17154 = VECTOR('',#17155,1.);+#17155 = DIRECTION('',(-0.,-0.,-1.));+#17156 = PCURVE('',#17086,#17157);+#17157 = DEFINITIONAL_REPRESENTATION('',(#17158),#17162);+#17158 = LINE('',#17159,#17160);+#17159 = CARTESIAN_POINT('',(1.,0.));+#17160 = VECTOR('',#17161,1.);+#17161 = DIRECTION('',(0.,-1.));+#17162 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17163 = PCURVE('',#17164,#17171);+#17164 = SURFACE_OF_LINEAR_EXTRUSION('',#17165,#17169);+#17165 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17166,#17167,#17168),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17166 = CARTESIAN_POINT('',(-0.143195277623,-5.735432942708E-02,1.015)+ );+#17167 = CARTESIAN_POINT('',(-0.143195277623,-9.794061569941E-02,1.015)+ );+#17168 = CARTESIAN_POINT('',(-0.168347342355,-0.119281761533,1.015));+#17169 = VECTOR('',#17170,1.);+#17170 = DIRECTION('',(0.,0.,1.));+#17171 = DEFINITIONAL_REPRESENTATION('',(#17172),#17176);+#17172 = LINE('',#17173,#17174);+#17173 = CARTESIAN_POINT('',(0.,0.));+#17174 = VECTOR('',#17175,1.);+#17175 = DIRECTION('',(0.,-1.));+#17176 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17177 = ORIENTED_EDGE('',*,*,#17178,.F.);+#17178 = EDGE_CURVE('',#17071,#17149,#17179,.T.);+#17179 = SURFACE_CURVE('',#17180,(#17184,#17191),.PCURVE_S1.);+#17180 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17181,#17182,#17183),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17181 = CARTESIAN_POINT('',(-0.161487688337,-2.858189174107E-03,1.015)+ );+#17182 = CARTESIAN_POINT('',(-0.143195277623,-2.286551339286E-02,1.015)+ );+#17183 = CARTESIAN_POINT('',(-0.143195277623,-5.735432942708E-02,1.015)+ );+#17184 = PCURVE('',#17086,#17185);+#17185 = DEFINITIONAL_REPRESENTATION('',(#17186),#17190);+#17186 = LINE('',#17187,#17188);+#17187 = CARTESIAN_POINT('',(0.,0.));+#17188 = VECTOR('',#17189,1.);+#17189 = DIRECTION('',(1.,0.));+#17190 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17191 = PCURVE('',#16487,#17192);+#17192 = DEFINITIONAL_REPRESENTATION('',(#17193),#17197);+#17193 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17194,#17195,#17196),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17194 = CARTESIAN_POINT('',(0.19092703683,0.132238885789));+#17195 = CARTESIAN_POINT('',(0.209219447545,0.11223156157));+#17196 = CARTESIAN_POINT('',(0.209219447545,7.774274553571E-02));+#17197 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17198 = ADVANCED_FACE('',(#17199),#17164,.F.);+#17199 = FACE_BOUND('',#17200,.F.);+#17200 = EDGE_LOOP('',(#17201,#17202,#17225,#17255));+#17201 = ORIENTED_EDGE('',*,*,#17148,.T.);+#17202 = ORIENTED_EDGE('',*,*,#17203,.T.);+#17203 = EDGE_CURVE('',#17126,#17204,#17206,.T.);+#17204 = VERTEX_POINT('',#17205);+#17205 = CARTESIAN_POINT('',(-0.168347342355,-0.119281761533,0.975));+#17206 = SURFACE_CURVE('',#17207,(#17211,#17218),.PCURVE_S1.);+#17207 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17208,#17209,#17210),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17208 = CARTESIAN_POINT('',(-0.143195277623,-5.735432942708E-02,0.975)+ );+#17209 = CARTESIAN_POINT('',(-0.143195277623,-9.794061569941E-02,0.975)+ );+#17210 = CARTESIAN_POINT('',(-0.168347342355,-0.119281761533,0.975));+#17211 = PCURVE('',#17164,#17212);+#17212 = DEFINITIONAL_REPRESENTATION('',(#17213),#17217);+#17213 = LINE('',#17214,#17215);+#17214 = CARTESIAN_POINT('',(0.,-4.E-02));+#17215 = VECTOR('',#17216,1.);+#17216 = DIRECTION('',(1.,0.));+#17217 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17218 = PCURVE('',#16431,#17219);+#17219 = DEFINITIONAL_REPRESENTATION('',(#17220),#17224);+#17220 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17221,#17222,#17223),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17221 = CARTESIAN_POINT('',(0.209219447545,7.774274553571E-02));+#17222 = CARTESIAN_POINT('',(0.209219447545,3.715645926339E-02));+#17223 = CARTESIAN_POINT('',(0.184067382813,1.581531343006E-02));+#17224 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17225 = ORIENTED_EDGE('',*,*,#17226,.F.);+#17226 = EDGE_CURVE('',#17227,#17204,#17229,.T.);+#17227 = VERTEX_POINT('',#17228);+#17228 = CARTESIAN_POINT('',(-0.168347342355,-0.119281761533,1.015));+#17229 = SURFACE_CURVE('',#17230,(#17234,#17241),.PCURVE_S1.);+#17230 = LINE('',#17231,#17232);+#17231 = CARTESIAN_POINT('',(-0.168347342355,-0.119281761533,1.015));+#17232 = VECTOR('',#17233,1.);+#17233 = DIRECTION('',(-0.,-0.,-1.));+#17234 = PCURVE('',#17164,#17235);+#17235 = DEFINITIONAL_REPRESENTATION('',(#17236),#17240);+#17236 = LINE('',#17237,#17238);+#17237 = CARTESIAN_POINT('',(1.,0.));+#17238 = VECTOR('',#17239,1.);+#17239 = DIRECTION('',(0.,-1.));+#17240 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17241 = PCURVE('',#17242,#17249);+#17242 = SURFACE_OF_LINEAR_EXTRUSION('',#17243,#17247);+#17243 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17244,#17245,#17246),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17244 = CARTESIAN_POINT('',(-0.168347342355,-0.119281761533,1.015));+#17245 = CARTESIAN_POINT('',(-0.193499407087,-0.140622907366,1.015));+#17246 = CARTESIAN_POINT('',(-0.241516985212,-0.140622907366,1.015));+#17247 = VECTOR('',#17248,1.);+#17248 = DIRECTION('',(0.,0.,1.));+#17249 = DEFINITIONAL_REPRESENTATION('',(#17250),#17254);+#17250 = LINE('',#17251,#17252);+#17251 = CARTESIAN_POINT('',(0.,0.));+#17252 = VECTOR('',#17253,1.);+#17253 = DIRECTION('',(0.,-1.));+#17254 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17255 = ORIENTED_EDGE('',*,*,#17256,.F.);+#17256 = EDGE_CURVE('',#17149,#17227,#17257,.T.);+#17257 = SURFACE_CURVE('',#17258,(#17262,#17269),.PCURVE_S1.);+#17258 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17259,#17260,#17261),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17259 = CARTESIAN_POINT('',(-0.143195277623,-5.735432942708E-02,1.015)+ );+#17260 = CARTESIAN_POINT('',(-0.143195277623,-9.794061569941E-02,1.015)+ );+#17261 = CARTESIAN_POINT('',(-0.168347342355,-0.119281761533,1.015));+#17262 = PCURVE('',#17164,#17263);+#17263 = DEFINITIONAL_REPRESENTATION('',(#17264),#17268);+#17264 = LINE('',#17265,#17266);+#17265 = CARTESIAN_POINT('',(0.,0.));+#17266 = VECTOR('',#17267,1.);+#17267 = DIRECTION('',(1.,0.));+#17268 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17269 = PCURVE('',#16487,#17270);+#17270 = DEFINITIONAL_REPRESENTATION('',(#17271),#17275);+#17271 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17272,#17273,#17274),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17272 = CARTESIAN_POINT('',(0.209219447545,7.774274553571E-02));+#17273 = CARTESIAN_POINT('',(0.209219447545,3.715645926339E-02));+#17274 = CARTESIAN_POINT('',(0.184067382813,1.581531343006E-02));+#17275 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17276 = ADVANCED_FACE('',(#17277),#17242,.F.);+#17277 = FACE_BOUND('',#17278,.F.);+#17278 = EDGE_LOOP('',(#17279,#17280,#17303,#17333));+#17279 = ORIENTED_EDGE('',*,*,#17226,.T.);+#17280 = ORIENTED_EDGE('',*,*,#17281,.T.);+#17281 = EDGE_CURVE('',#17204,#17282,#17284,.T.);+#17282 = VERTEX_POINT('',#17283);+#17283 = CARTESIAN_POINT('',(-0.241516985212,-0.140622907366,0.975));+#17284 = SURFACE_CURVE('',#17285,(#17289,#17296),.PCURVE_S1.);+#17285 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17286,#17287,#17288),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17286 = CARTESIAN_POINT('',(-0.168347342355,-0.119281761533,0.975));+#17287 = CARTESIAN_POINT('',(-0.193499407087,-0.140622907366,0.975));+#17288 = CARTESIAN_POINT('',(-0.241516985212,-0.140622907366,0.975));+#17289 = PCURVE('',#17242,#17290);+#17290 = DEFINITIONAL_REPRESENTATION('',(#17291),#17295);+#17291 = LINE('',#17292,#17293);+#17292 = CARTESIAN_POINT('',(0.,-4.E-02));+#17293 = VECTOR('',#17294,1.);+#17294 = DIRECTION('',(1.,0.));+#17295 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17296 = PCURVE('',#16431,#17297);+#17297 = DEFINITIONAL_REPRESENTATION('',(#17298),#17302);+#17298 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17299,#17300,#17301),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17299 = CARTESIAN_POINT('',(0.184067382813,1.581531343006E-02));+#17300 = CARTESIAN_POINT('',(0.15891531808,-5.525832403274E-03));+#17301 = CARTESIAN_POINT('',(0.110897739955,-5.525832403274E-03));+#17302 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17303 = ORIENTED_EDGE('',*,*,#17304,.F.);+#17304 = EDGE_CURVE('',#17305,#17282,#17307,.T.);+#17305 = VERTEX_POINT('',#17306);+#17306 = CARTESIAN_POINT('',(-0.241516985212,-0.140622907366,1.015));+#17307 = SURFACE_CURVE('',#17308,(#17312,#17319),.PCURVE_S1.);+#17308 = LINE('',#17309,#17310);+#17309 = CARTESIAN_POINT('',(-0.241516985212,-0.140622907366,1.015));+#17310 = VECTOR('',#17311,1.);+#17311 = DIRECTION('',(-0.,-0.,-1.));+#17312 = PCURVE('',#17242,#17313);+#17313 = DEFINITIONAL_REPRESENTATION('',(#17314),#17318);+#17314 = LINE('',#17315,#17316);+#17315 = CARTESIAN_POINT('',(1.,0.));+#17316 = VECTOR('',#17317,1.);+#17317 = DIRECTION('',(0.,-1.));+#17318 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17319 = PCURVE('',#17320,#17327);+#17320 = SURFACE_OF_LINEAR_EXTRUSION('',#17321,#17325);+#17321 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17322,#17323,#17324),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17322 = CARTESIAN_POINT('',(-0.241516985212,-0.140622907366,1.015));+#17323 = CARTESIAN_POINT('',(-0.261524309431,-0.140622907366,1.015));+#17324 = CARTESIAN_POINT('',(-0.281722179594,-0.136335623605,1.015));+#17325 = VECTOR('',#17326,1.);+#17326 = DIRECTION('',(0.,0.,1.));+#17327 = DEFINITIONAL_REPRESENTATION('',(#17328),#17332);+#17328 = LINE('',#17329,#17330);+#17329 = CARTESIAN_POINT('',(0.,0.));+#17330 = VECTOR('',#17331,1.);+#17331 = DIRECTION('',(0.,-1.));+#17332 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17333 = ORIENTED_EDGE('',*,*,#17334,.F.);+#17334 = EDGE_CURVE('',#17227,#17305,#17335,.T.);+#17335 = SURFACE_CURVE('',#17336,(#17340,#17347),.PCURVE_S1.);+#17336 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17337,#17338,#17339),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17337 = CARTESIAN_POINT('',(-0.168347342355,-0.119281761533,1.015));+#17338 = CARTESIAN_POINT('',(-0.193499407087,-0.140622907366,1.015));+#17339 = CARTESIAN_POINT('',(-0.241516985212,-0.140622907366,1.015));+#17340 = PCURVE('',#17242,#17341);+#17341 = DEFINITIONAL_REPRESENTATION('',(#17342),#17346);+#17342 = LINE('',#17343,#17344);+#17343 = CARTESIAN_POINT('',(0.,0.));+#17344 = VECTOR('',#17345,1.);+#17345 = DIRECTION('',(1.,0.));+#17346 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17347 = PCURVE('',#16487,#17348);+#17348 = DEFINITIONAL_REPRESENTATION('',(#17349),#17353);+#17349 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17350,#17351,#17352),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17350 = CARTESIAN_POINT('',(0.184067382813,1.581531343006E-02));+#17351 = CARTESIAN_POINT('',(0.15891531808,-5.525832403274E-03));+#17352 = CARTESIAN_POINT('',(0.110897739955,-5.525832403274E-03));+#17353 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17354 = ADVANCED_FACE('',(#17355),#17320,.F.);+#17355 = FACE_BOUND('',#17356,.F.);+#17356 = EDGE_LOOP('',(#17357,#17358,#17381,#17411));+#17357 = ORIENTED_EDGE('',*,*,#17304,.T.);+#17358 = ORIENTED_EDGE('',*,*,#17359,.T.);+#17359 = EDGE_CURVE('',#17282,#17360,#17362,.T.);+#17360 = VERTEX_POINT('',#17361);+#17361 = CARTESIAN_POINT('',(-0.281722179594,-0.136335623605,0.975));+#17362 = SURFACE_CURVE('',#17363,(#17367,#17374),.PCURVE_S1.);+#17363 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17364,#17365,#17366),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17364 = CARTESIAN_POINT('',(-0.241516985212,-0.140622907366,0.975));+#17365 = CARTESIAN_POINT('',(-0.261524309431,-0.140622907366,0.975));+#17366 = CARTESIAN_POINT('',(-0.281722179594,-0.136335623605,0.975));+#17367 = PCURVE('',#17320,#17368);+#17368 = DEFINITIONAL_REPRESENTATION('',(#17369),#17373);+#17369 = LINE('',#17370,#17371);+#17370 = CARTESIAN_POINT('',(0.,-4.E-02));+#17371 = VECTOR('',#17372,1.);+#17372 = DIRECTION('',(1.,0.));+#17373 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17374 = PCURVE('',#16431,#17375);+#17375 = DEFINITIONAL_REPRESENTATION('',(#17376),#17380);+#17376 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17377,#17378,#17379),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17377 = CARTESIAN_POINT('',(0.110897739955,-5.525832403274E-03));+#17378 = CARTESIAN_POINT('',(9.089041573661E-02,-5.525832403274E-03));+#17379 = CARTESIAN_POINT('',(7.069254557292E-02,-1.238548642113E-03));+#17380 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17381 = ORIENTED_EDGE('',*,*,#17382,.F.);+#17382 = EDGE_CURVE('',#17383,#17360,#17385,.T.);+#17383 = VERTEX_POINT('',#17384);+#17384 = CARTESIAN_POINT('',(-0.281722179594,-0.136335623605,1.015));+#17385 = SURFACE_CURVE('',#17386,(#17390,#17397),.PCURVE_S1.);+#17386 = LINE('',#17387,#17388);+#17387 = CARTESIAN_POINT('',(-0.281722179594,-0.136335623605,1.015));+#17388 = VECTOR('',#17389,1.);+#17389 = DIRECTION('',(-0.,-0.,-1.));+#17390 = PCURVE('',#17320,#17391);+#17391 = DEFINITIONAL_REPRESENTATION('',(#17392),#17396);+#17392 = LINE('',#17393,#17394);+#17393 = CARTESIAN_POINT('',(1.,0.));+#17394 = VECTOR('',#17395,1.);+#17395 = DIRECTION('',(0.,-1.));+#17396 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17397 = PCURVE('',#17398,#17405);+#17398 = SURFACE_OF_LINEAR_EXTRUSION('',#17399,#17403);+#17399 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17400,#17401,#17402),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17400 = CARTESIAN_POINT('',(-0.281722179594,-0.136335623605,1.015));+#17401 = CARTESIAN_POINT('',(-0.301920049758,-0.132048339844,1.015));+#17402 = CARTESIAN_POINT('',(-0.322308465867,-0.123473772321,1.015));+#17403 = VECTOR('',#17404,1.);+#17404 = DIRECTION('',(0.,0.,1.));+#17405 = DEFINITIONAL_REPRESENTATION('',(#17406),#17410);+#17406 = LINE('',#17407,#17408);+#17407 = CARTESIAN_POINT('',(0.,0.));+#17408 = VECTOR('',#17409,1.);+#17409 = DIRECTION('',(0.,-1.));+#17410 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17411 = ORIENTED_EDGE('',*,*,#17412,.F.);+#17412 = EDGE_CURVE('',#17305,#17383,#17413,.T.);+#17413 = SURFACE_CURVE('',#17414,(#17418,#17425),.PCURVE_S1.);+#17414 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17415,#17416,#17417),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17415 = CARTESIAN_POINT('',(-0.241516985212,-0.140622907366,1.015));+#17416 = CARTESIAN_POINT('',(-0.261524309431,-0.140622907366,1.015));+#17417 = CARTESIAN_POINT('',(-0.281722179594,-0.136335623605,1.015));+#17418 = PCURVE('',#17320,#17419);+#17419 = DEFINITIONAL_REPRESENTATION('',(#17420),#17424);+#17420 = LINE('',#17421,#17422);+#17421 = CARTESIAN_POINT('',(0.,0.));+#17422 = VECTOR('',#17423,1.);+#17423 = DIRECTION('',(1.,0.));+#17424 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17425 = PCURVE('',#16487,#17426);+#17426 = DEFINITIONAL_REPRESENTATION('',(#17427),#17431);+#17427 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17428,#17429,#17430),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17428 = CARTESIAN_POINT('',(0.110897739955,-5.525832403274E-03));+#17429 = CARTESIAN_POINT('',(9.089041573661E-02,-5.525832403274E-03));+#17430 = CARTESIAN_POINT('',(7.069254557292E-02,-1.238548642113E-03));+#17431 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17432 = ADVANCED_FACE('',(#17433),#17398,.F.);+#17433 = FACE_BOUND('',#17434,.F.);+#17434 = EDGE_LOOP('',(#17435,#17436,#17459,#17487));+#17435 = ORIENTED_EDGE('',*,*,#17382,.T.);+#17436 = ORIENTED_EDGE('',*,*,#17437,.T.);+#17437 = EDGE_CURVE('',#17360,#17438,#17440,.T.);+#17438 = VERTEX_POINT('',#17439);+#17439 = CARTESIAN_POINT('',(-0.322308465867,-0.123473772321,0.975));+#17440 = SURFACE_CURVE('',#17441,(#17445,#17452),.PCURVE_S1.);+#17441 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17442,#17443,#17444),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17442 = CARTESIAN_POINT('',(-0.281722179594,-0.136335623605,0.975));+#17443 = CARTESIAN_POINT('',(-0.301920049758,-0.132048339844,0.975));+#17444 = CARTESIAN_POINT('',(-0.322308465867,-0.123473772321,0.975));+#17445 = PCURVE('',#17398,#17446);+#17446 = DEFINITIONAL_REPRESENTATION('',(#17447),#17451);+#17447 = LINE('',#17448,#17449);+#17448 = CARTESIAN_POINT('',(0.,-4.E-02));+#17449 = VECTOR('',#17450,1.);+#17450 = DIRECTION('',(1.,0.));+#17451 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17452 = PCURVE('',#16431,#17453);+#17453 = DEFINITIONAL_REPRESENTATION('',(#17454),#17458);+#17454 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17455,#17456,#17457),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17455 = CARTESIAN_POINT('',(7.069254557292E-02,-1.238548642113E-03));+#17456 = CARTESIAN_POINT('',(5.049467540923E-02,3.048735119048E-03));+#17457 = CARTESIAN_POINT('',(3.01062593006E-02,1.162330264137E-02));+#17458 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17459 = ORIENTED_EDGE('',*,*,#17460,.F.);+#17460 = EDGE_CURVE('',#17461,#17438,#17463,.T.);+#17461 = VERTEX_POINT('',#17462);+#17462 = CARTESIAN_POINT('',(-0.322308465867,-0.123473772321,1.015));+#17463 = SURFACE_CURVE('',#17464,(#17468,#17475),.PCURVE_S1.);+#17464 = LINE('',#17465,#17466);+#17465 = CARTESIAN_POINT('',(-0.322308465867,-0.123473772321,1.015));+#17466 = VECTOR('',#17467,1.);+#17467 = DIRECTION('',(-0.,-0.,-1.));+#17468 = PCURVE('',#17398,#17469);+#17469 = DEFINITIONAL_REPRESENTATION('',(#17470),#17474);+#17470 = LINE('',#17471,#17472);+#17471 = CARTESIAN_POINT('',(1.,0.));+#17472 = VECTOR('',#17473,1.);+#17473 = DIRECTION('',(0.,-1.));+#17474 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17475 = PCURVE('',#17476,#17481);+#17476 = PLANE('',#17477);+#17477 = AXIS2_PLACEMENT_3D('',#17478,#17479,#17480);+#17478 = CARTESIAN_POINT('',(-0.322308465867,-0.123473772321,1.015));+#17479 = DIRECTION('',(1.,0.,0.));+#17480 = DIRECTION('',(0.,1.,0.));+#17481 = DEFINITIONAL_REPRESENTATION('',(#17482),#17486);+#17482 = LINE('',#17483,#17484);+#17483 = CARTESIAN_POINT('',(0.,0.));+#17484 = VECTOR('',#17485,1.);+#17485 = DIRECTION('',(0.,-1.));+#17486 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17487 = ORIENTED_EDGE('',*,*,#17488,.F.);+#17488 = EDGE_CURVE('',#17383,#17461,#17489,.T.);+#17489 = SURFACE_CURVE('',#17490,(#17494,#17501),.PCURVE_S1.);+#17490 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17491,#17492,#17493),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17491 = CARTESIAN_POINT('',(-0.281722179594,-0.136335623605,1.015));+#17492 = CARTESIAN_POINT('',(-0.301920049758,-0.132048339844,1.015));+#17493 = CARTESIAN_POINT('',(-0.322308465867,-0.123473772321,1.015));+#17494 = PCURVE('',#17398,#17495);+#17495 = DEFINITIONAL_REPRESENTATION('',(#17496),#17500);+#17496 = LINE('',#17497,#17498);+#17497 = CARTESIAN_POINT('',(0.,0.));+#17498 = VECTOR('',#17499,1.);+#17499 = DIRECTION('',(1.,0.));+#17500 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17501 = PCURVE('',#16487,#17502);+#17502 = DEFINITIONAL_REPRESENTATION('',(#17503),#17507);+#17503 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17504,#17505,#17506),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17504 = CARTESIAN_POINT('',(7.069254557292E-02,-1.238548642113E-03));+#17505 = CARTESIAN_POINT('',(5.049467540923E-02,3.048735119048E-03));+#17506 = CARTESIAN_POINT('',(3.01062593006E-02,1.162330264137E-02));+#17507 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17508 = ADVANCED_FACE('',(#17509),#17476,.F.);+#17509 = FACE_BOUND('',#17510,.F.);+#17510 = EDGE_LOOP('',(#17511,#17512,#17535,#17565));+#17511 = ORIENTED_EDGE('',*,*,#17460,.T.);+#17512 = ORIENTED_EDGE('',*,*,#17513,.T.);+#17513 = EDGE_CURVE('',#17438,#17514,#17516,.T.);+#17514 = VERTEX_POINT('',#17515);+#17515 = CARTESIAN_POINT('',(-0.322308465867,-8.250639415923E-02,0.975)+ );+#17516 = SURFACE_CURVE('',#17517,(#17521,#17528),.PCURVE_S1.);+#17517 = LINE('',#17518,#17519);+#17518 = CARTESIAN_POINT('',(-0.322308465867,-0.123473772321,0.975));+#17519 = VECTOR('',#17520,1.);+#17520 = DIRECTION('',(0.,1.,0.));+#17521 = PCURVE('',#17476,#17522);+#17522 = DEFINITIONAL_REPRESENTATION('',(#17523),#17527);+#17523 = LINE('',#17524,#17525);+#17524 = CARTESIAN_POINT('',(0.,-4.E-02));+#17525 = VECTOR('',#17526,1.);+#17526 = DIRECTION('',(1.,0.));+#17527 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17528 = PCURVE('',#16431,#17529);+#17529 = DEFINITIONAL_REPRESENTATION('',(#17530),#17534);+#17530 = LINE('',#17531,#17532);+#17531 = CARTESIAN_POINT('',(3.01062593006E-02,1.162330264137E-02));+#17532 = VECTOR('',#17533,1.);+#17533 = DIRECTION('',(0.,1.));+#17534 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17535 = ORIENTED_EDGE('',*,*,#17536,.F.);+#17536 = EDGE_CURVE('',#17537,#17514,#17539,.T.);+#17537 = VERTEX_POINT('',#17538);+#17538 = CARTESIAN_POINT('',(-0.322308465867,-8.250639415923E-02,1.015)+ );+#17539 = SURFACE_CURVE('',#17540,(#17544,#17551),.PCURVE_S1.);+#17540 = LINE('',#17541,#17542);+#17541 = CARTESIAN_POINT('',(-0.322308465867,-8.250639415923E-02,1.015)+ );+#17542 = VECTOR('',#17543,1.);+#17543 = DIRECTION('',(-0.,-0.,-1.));+#17544 = PCURVE('',#17476,#17545);+#17545 = DEFINITIONAL_REPRESENTATION('',(#17546),#17550);+#17546 = LINE('',#17547,#17548);+#17547 = CARTESIAN_POINT('',(4.09673781622E-02,0.));+#17548 = VECTOR('',#17549,1.);+#17549 = DIRECTION('',(0.,-1.));+#17550 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17551 = PCURVE('',#17552,#17559);+#17552 = SURFACE_OF_LINEAR_EXTRUSION('',#17553,#17557);+#17553 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17554,#17555,#17556),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17554 = CARTESIAN_POINT('',(-0.322308465867,-8.250639415923E-02,1.015)+ );+#17555 = CARTESIAN_POINT('',(-0.300395682199,-9.641624813988E-02,1.015)+ );+#17556 = CARTESIAN_POINT('',(-0.280864722842,-0.102894810268,1.015));+#17557 = VECTOR('',#17558,1.);+#17558 = DIRECTION('',(0.,0.,1.));+#17559 = DEFINITIONAL_REPRESENTATION('',(#17560),#17564);+#17560 = LINE('',#17561,#17562);+#17561 = CARTESIAN_POINT('',(0.,0.));+#17562 = VECTOR('',#17563,1.);+#17563 = DIRECTION('',(0.,-1.));+#17564 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17565 = ORIENTED_EDGE('',*,*,#17566,.F.);+#17566 = EDGE_CURVE('',#17461,#17537,#17567,.T.);+#17567 = SURFACE_CURVE('',#17568,(#17572,#17579),.PCURVE_S1.);+#17568 = LINE('',#17569,#17570);+#17569 = CARTESIAN_POINT('',(-0.322308465867,-0.123473772321,1.015));+#17570 = VECTOR('',#17571,1.);+#17571 = DIRECTION('',(0.,1.,0.));+#17572 = PCURVE('',#17476,#17573);+#17573 = DEFINITIONAL_REPRESENTATION('',(#17574),#17578);+#17574 = LINE('',#17575,#17576);+#17575 = CARTESIAN_POINT('',(0.,0.));+#17576 = VECTOR('',#17577,1.);+#17577 = DIRECTION('',(1.,0.));+#17578 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17579 = PCURVE('',#16487,#17580);+#17580 = DEFINITIONAL_REPRESENTATION('',(#17581),#17585);+#17581 = LINE('',#17582,#17583);+#17582 = CARTESIAN_POINT('',(3.01062593006E-02,1.162330264137E-02));+#17583 = VECTOR('',#17584,1.);+#17584 = DIRECTION('',(0.,1.));+#17585 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17586 = ADVANCED_FACE('',(#17587),#17552,.F.);+#17587 = FACE_BOUND('',#17588,.F.);+#17588 = EDGE_LOOP('',(#17589,#17590,#17613,#17643));+#17589 = ORIENTED_EDGE('',*,*,#17536,.T.);+#17590 = ORIENTED_EDGE('',*,*,#17591,.T.);+#17591 = EDGE_CURVE('',#17514,#17592,#17594,.T.);+#17592 = VERTEX_POINT('',#17593);+#17593 = CARTESIAN_POINT('',(-0.280864722842,-0.102894810268,0.975));+#17594 = SURFACE_CURVE('',#17595,(#17599,#17606),.PCURVE_S1.);+#17595 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17596,#17597,#17598),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17596 = CARTESIAN_POINT('',(-0.322308465867,-8.250639415923E-02,0.975)+ );+#17597 = CARTESIAN_POINT('',(-0.300395682199,-9.641624813988E-02,0.975)+ );+#17598 = CARTESIAN_POINT('',(-0.280864722842,-0.102894810268,0.975));+#17599 = PCURVE('',#17552,#17600);+#17600 = DEFINITIONAL_REPRESENTATION('',(#17601),#17605);+#17601 = LINE('',#17602,#17603);+#17602 = CARTESIAN_POINT('',(0.,-4.E-02));+#17603 = VECTOR('',#17604,1.);+#17604 = DIRECTION('',(1.,0.));+#17605 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17606 = PCURVE('',#16431,#17607);+#17607 = DEFINITIONAL_REPRESENTATION('',(#17608),#17612);+#17608 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17609,#17610,#17611),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17609 = CARTESIAN_POINT('',(3.01062593006E-02,5.259068080357E-02));+#17610 = CARTESIAN_POINT('',(5.201904296875E-02,3.868082682292E-02));+#17611 = CARTESIAN_POINT('',(7.155000232515E-02,3.220226469494E-02));+#17612 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17613 = ORIENTED_EDGE('',*,*,#17614,.F.);+#17614 = EDGE_CURVE('',#17615,#17592,#17617,.T.);+#17615 = VERTEX_POINT('',#17616);+#17616 = CARTESIAN_POINT('',(-0.280864722842,-0.102894810268,1.015));+#17617 = SURFACE_CURVE('',#17618,(#17622,#17629),.PCURVE_S1.);+#17618 = LINE('',#17619,#17620);+#17619 = CARTESIAN_POINT('',(-0.280864722842,-0.102894810268,1.015));+#17620 = VECTOR('',#17621,1.);+#17621 = DIRECTION('',(-0.,-0.,-1.));+#17622 = PCURVE('',#17552,#17623);+#17623 = DEFINITIONAL_REPRESENTATION('',(#17624),#17628);+#17624 = LINE('',#17625,#17626);+#17625 = CARTESIAN_POINT('',(1.,0.));+#17626 = VECTOR('',#17627,1.);+#17627 = DIRECTION('',(0.,-1.));+#17628 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17629 = PCURVE('',#17630,#17637);+#17630 = SURFACE_OF_LINEAR_EXTRUSION('',#17631,#17635);+#17631 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17632,#17633,#17634),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17632 = CARTESIAN_POINT('',(-0.280864722842,-0.102894810268,1.015));+#17633 = CARTESIAN_POINT('',(-0.261333763486,-0.109373372396,1.015));+#17634 = CARTESIAN_POINT('',(-0.241516985212,-0.109373372396,1.015));+#17635 = VECTOR('',#17636,1.);+#17636 = DIRECTION('',(0.,0.,1.));+#17637 = DEFINITIONAL_REPRESENTATION('',(#17638),#17642);+#17638 = LINE('',#17639,#17640);+#17639 = CARTESIAN_POINT('',(0.,0.));+#17640 = VECTOR('',#17641,1.);+#17641 = DIRECTION('',(0.,-1.));+#17642 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17643 = ORIENTED_EDGE('',*,*,#17644,.F.);+#17644 = EDGE_CURVE('',#17537,#17615,#17645,.T.);+#17645 = SURFACE_CURVE('',#17646,(#17650,#17657),.PCURVE_S1.);+#17646 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17647,#17648,#17649),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17647 = CARTESIAN_POINT('',(-0.322308465867,-8.250639415923E-02,1.015)+ );+#17648 = CARTESIAN_POINT('',(-0.300395682199,-9.641624813988E-02,1.015)+ );+#17649 = CARTESIAN_POINT('',(-0.280864722842,-0.102894810268,1.015));+#17650 = PCURVE('',#17552,#17651);+#17651 = DEFINITIONAL_REPRESENTATION('',(#17652),#17656);+#17652 = LINE('',#17653,#17654);+#17653 = CARTESIAN_POINT('',(0.,0.));+#17654 = VECTOR('',#17655,1.);+#17655 = DIRECTION('',(1.,0.));+#17656 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17657 = PCURVE('',#16487,#17658);+#17658 = DEFINITIONAL_REPRESENTATION('',(#17659),#17663);+#17659 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17660,#17661,#17662),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17660 = CARTESIAN_POINT('',(3.01062593006E-02,5.259068080357E-02));+#17661 = CARTESIAN_POINT('',(5.201904296875E-02,3.868082682292E-02));+#17662 = CARTESIAN_POINT('',(7.155000232515E-02,3.220226469494E-02));+#17663 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17664 = ADVANCED_FACE('',(#17665),#17630,.F.);+#17665 = FACE_BOUND('',#17666,.F.);+#17666 = EDGE_LOOP('',(#17667,#17668,#17691,#17721));+#17667 = ORIENTED_EDGE('',*,*,#17614,.T.);+#17668 = ORIENTED_EDGE('',*,*,#17669,.T.);+#17669 = EDGE_CURVE('',#17592,#17670,#17672,.T.);+#17670 = VERTEX_POINT('',#17671);+#17671 = CARTESIAN_POINT('',(-0.241516985212,-0.109373372396,0.975));+#17672 = SURFACE_CURVE('',#17673,(#17677,#17684),.PCURVE_S1.);+#17673 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17674,#17675,#17676),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17674 = CARTESIAN_POINT('',(-0.280864722842,-0.102894810268,0.975));+#17675 = CARTESIAN_POINT('',(-0.261333763486,-0.109373372396,0.975));+#17676 = CARTESIAN_POINT('',(-0.241516985212,-0.109373372396,0.975));+#17677 = PCURVE('',#17630,#17678);+#17678 = DEFINITIONAL_REPRESENTATION('',(#17679),#17683);+#17679 = LINE('',#17680,#17681);+#17680 = CARTESIAN_POINT('',(0.,-4.E-02));+#17681 = VECTOR('',#17682,1.);+#17682 = DIRECTION('',(1.,0.));+#17683 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17684 = PCURVE('',#16431,#17685);+#17685 = DEFINITIONAL_REPRESENTATION('',(#17686),#17690);+#17686 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17687,#17688,#17689),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17687 = CARTESIAN_POINT('',(7.155000232515E-02,3.220226469494E-02));+#17688 = CARTESIAN_POINT('',(9.108096168155E-02,2.572370256696E-02));+#17689 = CARTESIAN_POINT('',(0.110897739955,2.572370256696E-02));+#17690 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17691 = ORIENTED_EDGE('',*,*,#17692,.F.);+#17692 = EDGE_CURVE('',#17693,#17670,#17695,.T.);+#17693 = VERTEX_POINT('',#17694);+#17694 = CARTESIAN_POINT('',(-0.241516985212,-0.109373372396,1.015));+#17695 = SURFACE_CURVE('',#17696,(#17700,#17707),.PCURVE_S1.);+#17696 = LINE('',#17697,#17698);+#17697 = CARTESIAN_POINT('',(-0.241516985212,-0.109373372396,1.015));+#17698 = VECTOR('',#17699,1.);+#17699 = DIRECTION('',(-0.,-0.,-1.));+#17700 = PCURVE('',#17630,#17701);+#17701 = DEFINITIONAL_REPRESENTATION('',(#17702),#17706);+#17702 = LINE('',#17703,#17704);+#17703 = CARTESIAN_POINT('',(1.,0.));+#17704 = VECTOR('',#17705,1.);+#17705 = DIRECTION('',(0.,-1.));+#17706 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17707 = PCURVE('',#17708,#17715);+#17708 = SURFACE_OF_LINEAR_EXTRUSION('',#17709,#17713);+#17709 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17710,#17711,#17712),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17710 = CARTESIAN_POINT('',(-0.241516985212,-0.109373372396,1.015));+#17711 = CARTESIAN_POINT('',(-0.212363455636,-0.109373372396,1.015));+#17712 = CARTESIAN_POINT('',(-0.196167050316,-9.632097516741E-02,1.015)+ );+#17713 = VECTOR('',#17714,1.);+#17714 = DIRECTION('',(0.,0.,1.));+#17715 = DEFINITIONAL_REPRESENTATION('',(#17716),#17720);+#17716 = LINE('',#17717,#17718);+#17717 = CARTESIAN_POINT('',(0.,0.));+#17718 = VECTOR('',#17719,1.);+#17719 = DIRECTION('',(0.,-1.));+#17720 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17721 = ORIENTED_EDGE('',*,*,#17722,.F.);+#17722 = EDGE_CURVE('',#17615,#17693,#17723,.T.);+#17723 = SURFACE_CURVE('',#17724,(#17728,#17735),.PCURVE_S1.);+#17724 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17725,#17726,#17727),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17725 = CARTESIAN_POINT('',(-0.280864722842,-0.102894810268,1.015));+#17726 = CARTESIAN_POINT('',(-0.261333763486,-0.109373372396,1.015));+#17727 = CARTESIAN_POINT('',(-0.241516985212,-0.109373372396,1.015));+#17728 = PCURVE('',#17630,#17729);+#17729 = DEFINITIONAL_REPRESENTATION('',(#17730),#17734);+#17730 = LINE('',#17731,#17732);+#17731 = CARTESIAN_POINT('',(0.,0.));+#17732 = VECTOR('',#17733,1.);+#17733 = DIRECTION('',(1.,0.));+#17734 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17735 = PCURVE('',#16487,#17736);+#17736 = DEFINITIONAL_REPRESENTATION('',(#17737),#17741);+#17737 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17738,#17739,#17740),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17738 = CARTESIAN_POINT('',(7.155000232515E-02,3.220226469494E-02));+#17739 = CARTESIAN_POINT('',(9.108096168155E-02,2.572370256696E-02));+#17740 = CARTESIAN_POINT('',(0.110897739955,2.572370256696E-02));+#17741 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17742 = ADVANCED_FACE('',(#17743),#17708,.F.);+#17743 = FACE_BOUND('',#17744,.F.);+#17744 = EDGE_LOOP('',(#17745,#17746,#17769,#17799));+#17745 = ORIENTED_EDGE('',*,*,#17692,.T.);+#17746 = ORIENTED_EDGE('',*,*,#17747,.T.);+#17747 = EDGE_CURVE('',#17670,#17748,#17750,.T.);+#17748 = VERTEX_POINT('',#17749);+#17749 = CARTESIAN_POINT('',(-0.196167050316,-9.632097516741E-02,0.975)+ );+#17750 = SURFACE_CURVE('',#17751,(#17755,#17762),.PCURVE_S1.);+#17751 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17752,#17753,#17754),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17752 = CARTESIAN_POINT('',(-0.241516985212,-0.109373372396,0.975));+#17753 = CARTESIAN_POINT('',(-0.212363455636,-0.109373372396,0.975));+#17754 = CARTESIAN_POINT('',(-0.196167050316,-9.632097516741E-02,0.975)+ );+#17755 = PCURVE('',#17708,#17756);+#17756 = DEFINITIONAL_REPRESENTATION('',(#17757),#17761);+#17757 = LINE('',#17758,#17759);+#17758 = CARTESIAN_POINT('',(0.,-4.E-02));+#17759 = VECTOR('',#17760,1.);+#17760 = DIRECTION('',(1.,0.));+#17761 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17762 = PCURVE('',#16431,#17763);+#17763 = DEFINITIONAL_REPRESENTATION('',(#17764),#17768);+#17764 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17765,#17766,#17767),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17765 = CARTESIAN_POINT('',(0.110897739955,2.572370256696E-02));+#17766 = CARTESIAN_POINT('',(0.140051269531,2.572370256696E-02));+#17767 = CARTESIAN_POINT('',(0.156247674851,3.877609979539E-02));+#17768 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17769 = ORIENTED_EDGE('',*,*,#17770,.F.);+#17770 = EDGE_CURVE('',#17771,#17748,#17773,.T.);+#17771 = VERTEX_POINT('',#17772);+#17772 = CARTESIAN_POINT('',(-0.196167050316,-9.632097516741E-02,1.015)+ );+#17773 = SURFACE_CURVE('',#17774,(#17778,#17785),.PCURVE_S1.);+#17774 = LINE('',#17775,#17776);+#17775 = CARTESIAN_POINT('',(-0.196167050316,-9.632097516741E-02,1.015)+ );+#17776 = VECTOR('',#17777,1.);+#17777 = DIRECTION('',(-0.,-0.,-1.));+#17778 = PCURVE('',#17708,#17779);+#17779 = DEFINITIONAL_REPRESENTATION('',(#17780),#17784);+#17780 = LINE('',#17781,#17782);+#17781 = CARTESIAN_POINT('',(1.,0.));+#17782 = VECTOR('',#17783,1.);+#17783 = DIRECTION('',(0.,-1.));+#17784 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17785 = PCURVE('',#17786,#17793);+#17786 = SURFACE_OF_LINEAR_EXTRUSION('',#17787,#17791);+#17787 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17788,#17789,#17790),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17788 = CARTESIAN_POINT('',(-0.196167050316,-9.632097516741E-02,1.015)+ );+#17789 = CARTESIAN_POINT('',(-0.179970644996,-8.326857793899E-02,1.015)+ );+#17790 = CARTESIAN_POINT('',(-0.179970644996,-5.983142671131E-02,1.015)+ );+#17791 = VECTOR('',#17792,1.);+#17792 = DIRECTION('',(0.,0.,1.));+#17793 = DEFINITIONAL_REPRESENTATION('',(#17794),#17798);+#17794 = LINE('',#17795,#17796);+#17795 = CARTESIAN_POINT('',(0.,0.));+#17796 = VECTOR('',#17797,1.);+#17797 = DIRECTION('',(0.,-1.));+#17798 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17799 = ORIENTED_EDGE('',*,*,#17800,.F.);+#17800 = EDGE_CURVE('',#17693,#17771,#17801,.T.);+#17801 = SURFACE_CURVE('',#17802,(#17806,#17813),.PCURVE_S1.);+#17802 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17803,#17804,#17805),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17803 = CARTESIAN_POINT('',(-0.241516985212,-0.109373372396,1.015));+#17804 = CARTESIAN_POINT('',(-0.212363455636,-0.109373372396,1.015));+#17805 = CARTESIAN_POINT('',(-0.196167050316,-9.632097516741E-02,1.015)+ );+#17806 = PCURVE('',#17708,#17807);+#17807 = DEFINITIONAL_REPRESENTATION('',(#17808),#17812);+#17808 = LINE('',#17809,#17810);+#17809 = CARTESIAN_POINT('',(0.,0.));+#17810 = VECTOR('',#17811,1.);+#17811 = DIRECTION('',(1.,0.));+#17812 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17813 = PCURVE('',#16487,#17814);+#17814 = DEFINITIONAL_REPRESENTATION('',(#17815),#17819);+#17815 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17816,#17817,#17818),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17816 = CARTESIAN_POINT('',(0.110897739955,2.572370256696E-02));+#17817 = CARTESIAN_POINT('',(0.140051269531,2.572370256696E-02));+#17818 = CARTESIAN_POINT('',(0.156247674851,3.877609979539E-02));+#17819 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17820 = ADVANCED_FACE('',(#17821),#17786,.F.);+#17821 = FACE_BOUND('',#17822,.F.);+#17822 = EDGE_LOOP('',(#17823,#17824,#17847,#17877));+#17823 = ORIENTED_EDGE('',*,*,#17770,.T.);+#17824 = ORIENTED_EDGE('',*,*,#17825,.T.);+#17825 = EDGE_CURVE('',#17748,#17826,#17828,.T.);+#17826 = VERTEX_POINT('',#17827);+#17827 = CARTESIAN_POINT('',(-0.179970644996,-5.983142671131E-02,0.975)+ );+#17828 = SURFACE_CURVE('',#17829,(#17833,#17840),.PCURVE_S1.);+#17829 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17830,#17831,#17832),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17830 = CARTESIAN_POINT('',(-0.196167050316,-9.632097516741E-02,0.975)+ );+#17831 = CARTESIAN_POINT('',(-0.179970644996,-8.326857793899E-02,0.975)+ );+#17832 = CARTESIAN_POINT('',(-0.179970644996,-5.983142671131E-02,0.975)+ );+#17833 = PCURVE('',#17786,#17834);+#17834 = DEFINITIONAL_REPRESENTATION('',(#17835),#17839);+#17835 = LINE('',#17836,#17837);+#17836 = CARTESIAN_POINT('',(0.,-4.E-02));+#17837 = VECTOR('',#17838,1.);+#17838 = DIRECTION('',(1.,0.));+#17839 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17840 = PCURVE('',#16431,#17841);+#17841 = DEFINITIONAL_REPRESENTATION('',(#17842),#17846);+#17842 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17843,#17844,#17845),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17843 = CARTESIAN_POINT('',(0.156247674851,3.877609979539E-02));+#17844 = CARTESIAN_POINT('',(0.172444080171,5.182849702381E-02));+#17845 = CARTESIAN_POINT('',(0.172444080171,7.526564825149E-02));+#17846 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17847 = ORIENTED_EDGE('',*,*,#17848,.F.);+#17848 = EDGE_CURVE('',#17849,#17826,#17851,.T.);+#17849 = VERTEX_POINT('',#17850);+#17850 = CARTESIAN_POINT('',(-0.179970644996,-5.983142671131E-02,1.015)+ );+#17851 = SURFACE_CURVE('',#17852,(#17856,#17863),.PCURVE_S1.);+#17852 = LINE('',#17853,#17854);+#17853 = CARTESIAN_POINT('',(-0.179970644996,-5.983142671131E-02,1.015)+ );+#17854 = VECTOR('',#17855,1.);+#17855 = DIRECTION('',(-0.,-0.,-1.));+#17856 = PCURVE('',#17786,#17857);+#17857 = DEFINITIONAL_REPRESENTATION('',(#17858),#17862);+#17858 = LINE('',#17859,#17860);+#17859 = CARTESIAN_POINT('',(1.,0.));+#17860 = VECTOR('',#17861,1.);+#17861 = DIRECTION('',(0.,-1.));+#17862 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17863 = PCURVE('',#17864,#17871);+#17864 = SURFACE_OF_LINEAR_EXTRUSION('',#17865,#17869);+#17865 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17866,#17867,#17868),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17866 = CARTESIAN_POINT('',(-0.179970644996,-5.983142671131E-02,1.015)+ );+#17867 = CARTESIAN_POINT('',(-0.179970644996,-3.849028087798E-02,1.015)+ );+#17868 = CARTESIAN_POINT('',(-0.191117582775,-2.724807012649E-02,1.015)+ );+#17869 = VECTOR('',#17870,1.);+#17870 = DIRECTION('',(0.,0.,1.));+#17871 = DEFINITIONAL_REPRESENTATION('',(#17872),#17876);+#17872 = LINE('',#17873,#17874);+#17873 = CARTESIAN_POINT('',(0.,0.));+#17874 = VECTOR('',#17875,1.);+#17875 = DIRECTION('',(0.,-1.));+#17876 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17877 = ORIENTED_EDGE('',*,*,#17878,.F.);+#17878 = EDGE_CURVE('',#17771,#17849,#17879,.T.);+#17879 = SURFACE_CURVE('',#17880,(#17884,#17891),.PCURVE_S1.);+#17880 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17881,#17882,#17883),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17881 = CARTESIAN_POINT('',(-0.196167050316,-9.632097516741E-02,1.015)+ );+#17882 = CARTESIAN_POINT('',(-0.179970644996,-8.326857793899E-02,1.015)+ );+#17883 = CARTESIAN_POINT('',(-0.179970644996,-5.983142671131E-02,1.015)+ );+#17884 = PCURVE('',#17786,#17885);+#17885 = DEFINITIONAL_REPRESENTATION('',(#17886),#17890);+#17886 = LINE('',#17887,#17888);+#17887 = CARTESIAN_POINT('',(0.,0.));+#17888 = VECTOR('',#17889,1.);+#17889 = DIRECTION('',(1.,0.));+#17890 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17891 = PCURVE('',#16487,#17892);+#17892 = DEFINITIONAL_REPRESENTATION('',(#17893),#17897);+#17893 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17894,#17895,#17896),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17894 = CARTESIAN_POINT('',(0.156247674851,3.877609979539E-02));+#17895 = CARTESIAN_POINT('',(0.172444080171,5.182849702381E-02));+#17896 = CARTESIAN_POINT('',(0.172444080171,7.526564825149E-02));+#17897 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17898 = ADVANCED_FACE('',(#17899),#17864,.F.);+#17899 = FACE_BOUND('',#17900,.F.);+#17900 = EDGE_LOOP('',(#17901,#17902,#17925,#17955));+#17901 = ORIENTED_EDGE('',*,*,#17848,.T.);+#17902 = ORIENTED_EDGE('',*,*,#17903,.T.);+#17903 = EDGE_CURVE('',#17826,#17904,#17906,.T.);+#17904 = VERTEX_POINT('',#17905);+#17905 = CARTESIAN_POINT('',(-0.191117582775,-2.724807012649E-02,0.975)+ );+#17906 = SURFACE_CURVE('',#17907,(#17911,#17918),.PCURVE_S1.);+#17907 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17908,#17909,#17910),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17908 = CARTESIAN_POINT('',(-0.179970644996,-5.983142671131E-02,0.975)+ );+#17909 = CARTESIAN_POINT('',(-0.179970644996,-3.849028087798E-02,0.975)+ );+#17910 = CARTESIAN_POINT('',(-0.191117582775,-2.724807012649E-02,0.975)+ );+#17911 = PCURVE('',#17864,#17912);+#17912 = DEFINITIONAL_REPRESENTATION('',(#17913),#17917);+#17913 = LINE('',#17914,#17915);+#17914 = CARTESIAN_POINT('',(0.,-4.E-02));+#17915 = VECTOR('',#17916,1.);+#17916 = DIRECTION('',(1.,0.));+#17917 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17918 = PCURVE('',#16431,#17919);+#17919 = DEFINITIONAL_REPRESENTATION('',(#17920),#17924);+#17920 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17921,#17922,#17923),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17921 = CARTESIAN_POINT('',(0.172444080171,7.526564825149E-02));+#17922 = CARTESIAN_POINT('',(0.172444080171,9.660679408482E-02));+#17923 = CARTESIAN_POINT('',(0.161297142392,0.107849004836));+#17924 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17925 = ORIENTED_EDGE('',*,*,#17926,.F.);+#17926 = EDGE_CURVE('',#17927,#17904,#17929,.T.);+#17927 = VERTEX_POINT('',#17928);+#17928 = CARTESIAN_POINT('',(-0.191117582775,-2.724807012649E-02,1.015)+ );+#17929 = SURFACE_CURVE('',#17930,(#17934,#17941),.PCURVE_S1.);+#17930 = LINE('',#17931,#17932);+#17931 = CARTESIAN_POINT('',(-0.191117582775,-2.724807012649E-02,1.015)+ );+#17932 = VECTOR('',#17933,1.);+#17933 = DIRECTION('',(-0.,-0.,-1.));+#17934 = PCURVE('',#17864,#17935);+#17935 = DEFINITIONAL_REPRESENTATION('',(#17936),#17940);+#17936 = LINE('',#17937,#17938);+#17937 = CARTESIAN_POINT('',(1.,0.));+#17938 = VECTOR('',#17939,1.);+#17939 = DIRECTION('',(0.,-1.));+#17940 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17941 = PCURVE('',#17942,#17949);+#17942 = SURFACE_OF_LINEAR_EXTRUSION('',#17943,#17947);+#17943 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17944,#17945,#17946),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17944 = CARTESIAN_POINT('',(-0.191117582775,-2.724807012649E-02,1.015)+ );+#17945 = CARTESIAN_POINT('',(-0.202264520554,-1.6005859375E-02,1.015));+#17946 = CARTESIAN_POINT('',(-0.229893682571,-9.908389136905E-03,1.015)+ );+#17947 = VECTOR('',#17948,1.);+#17948 = DIRECTION('',(0.,0.,1.));+#17949 = DEFINITIONAL_REPRESENTATION('',(#17950),#17954);+#17950 = LINE('',#17951,#17952);+#17951 = CARTESIAN_POINT('',(0.,0.));+#17952 = VECTOR('',#17953,1.);+#17953 = DIRECTION('',(0.,-1.));+#17954 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17955 = ORIENTED_EDGE('',*,*,#17956,.F.);+#17956 = EDGE_CURVE('',#17849,#17927,#17957,.T.);+#17957 = SURFACE_CURVE('',#17958,(#17962,#17969),.PCURVE_S1.);+#17958 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17959,#17960,#17961),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17959 = CARTESIAN_POINT('',(-0.179970644996,-5.983142671131E-02,1.015)+ );+#17960 = CARTESIAN_POINT('',(-0.179970644996,-3.849028087798E-02,1.015)+ );+#17961 = CARTESIAN_POINT('',(-0.191117582775,-2.724807012649E-02,1.015)+ );+#17962 = PCURVE('',#17864,#17963);+#17963 = DEFINITIONAL_REPRESENTATION('',(#17964),#17968);+#17964 = LINE('',#17965,#17966);+#17965 = CARTESIAN_POINT('',(0.,0.));+#17966 = VECTOR('',#17967,1.);+#17967 = DIRECTION('',(1.,0.));+#17968 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17969 = PCURVE('',#16487,#17970);+#17970 = DEFINITIONAL_REPRESENTATION('',(#17971),#17975);+#17971 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17972,#17973,#17974),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17972 = CARTESIAN_POINT('',(0.172444080171,7.526564825149E-02));+#17973 = CARTESIAN_POINT('',(0.172444080171,9.660679408482E-02));+#17974 = CARTESIAN_POINT('',(0.161297142392,0.107849004836));+#17975 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17976 = ADVANCED_FACE('',(#17977),#17942,.F.);+#17977 = FACE_BOUND('',#17978,.F.);+#17978 = EDGE_LOOP('',(#17979,#17980,#18003,#18031));+#17979 = ORIENTED_EDGE('',*,*,#17926,.T.);+#17980 = ORIENTED_EDGE('',*,*,#17981,.T.);+#17981 = EDGE_CURVE('',#17904,#17982,#17984,.T.);+#17982 = VERTEX_POINT('',#17983);+#17983 = CARTESIAN_POINT('',(-0.229893682571,-9.908389136905E-03,0.975)+ );+#17984 = SURFACE_CURVE('',#17985,(#17989,#17996),.PCURVE_S1.);+#17985 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17986,#17987,#17988),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17986 = CARTESIAN_POINT('',(-0.191117582775,-2.724807012649E-02,0.975)+ );+#17987 = CARTESIAN_POINT('',(-0.202264520554,-1.6005859375E-02,0.975));+#17988 = CARTESIAN_POINT('',(-0.229893682571,-9.908389136905E-03,0.975)+ );+#17989 = PCURVE('',#17942,#17990);+#17990 = DEFINITIONAL_REPRESENTATION('',(#17991),#17995);+#17991 = LINE('',#17992,#17993);+#17992 = CARTESIAN_POINT('',(0.,-4.E-02));+#17993 = VECTOR('',#17994,1.);+#17994 = DIRECTION('',(1.,0.));+#17995 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17996 = PCURVE('',#16431,#17997);+#17997 = DEFINITIONAL_REPRESENTATION('',(#17998),#18002);+#17998 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17999,#18000,#18001),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17999 = CARTESIAN_POINT('',(0.161297142392,0.107849004836));+#18000 = CARTESIAN_POINT('',(0.150150204613,0.119091215588));+#18001 = CARTESIAN_POINT('',(0.122521042597,0.125188685826));+#18002 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18003 = ORIENTED_EDGE('',*,*,#18004,.F.);+#18004 = EDGE_CURVE('',#18005,#17982,#18007,.T.);+#18005 = VERTEX_POINT('',#18006);+#18006 = CARTESIAN_POINT('',(-0.229893682571,-9.908389136905E-03,1.015)+ );+#18007 = SURFACE_CURVE('',#18008,(#18012,#18019),.PCURVE_S1.);+#18008 = LINE('',#18009,#18010);+#18009 = CARTESIAN_POINT('',(-0.229893682571,-9.908389136905E-03,1.015)+ );+#18010 = VECTOR('',#18011,1.);+#18011 = DIRECTION('',(-0.,-0.,-1.));+#18012 = PCURVE('',#17942,#18013);+#18013 = DEFINITIONAL_REPRESENTATION('',(#18014),#18018);+#18014 = LINE('',#18015,#18016);+#18015 = CARTESIAN_POINT('',(1.,0.));+#18016 = VECTOR('',#18017,1.);+#18017 = DIRECTION('',(0.,-1.));+#18018 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18019 = PCURVE('',#18020,#18025);+#18020 = PLANE('',#18021);+#18021 = AXIS2_PLACEMENT_3D('',#18022,#18023,#18024);+#18022 = CARTESIAN_POINT('',(-0.229893682571,-9.908389136905E-03,1.015)+ );+#18023 = DIRECTION('',(0.225518272727,0.97423893818,0.));+#18024 = DIRECTION('',(-0.97423893818,0.225518272727,0.));+#18025 = DEFINITIONAL_REPRESENTATION('',(#18026),#18030);+#18026 = LINE('',#18027,#18028);+#18027 = CARTESIAN_POINT('',(0.,0.));+#18028 = VECTOR('',#18029,1.);+#18029 = DIRECTION('',(0.,-1.));+#18030 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18031 = ORIENTED_EDGE('',*,*,#18032,.F.);+#18032 = EDGE_CURVE('',#17927,#18005,#18033,.T.);+#18033 = SURFACE_CURVE('',#18034,(#18038,#18045),.PCURVE_S1.);+#18034 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18035,#18036,#18037),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18035 = CARTESIAN_POINT('',(-0.191117582775,-2.724807012649E-02,1.015)+ );+#18036 = CARTESIAN_POINT('',(-0.202264520554,-1.6005859375E-02,1.015));+#18037 = CARTESIAN_POINT('',(-0.229893682571,-9.908389136905E-03,1.015)+ );+#18038 = PCURVE('',#17942,#18039);+#18039 = DEFINITIONAL_REPRESENTATION('',(#18040),#18044);+#18040 = LINE('',#18041,#18042);+#18041 = CARTESIAN_POINT('',(0.,0.));+#18042 = VECTOR('',#18043,1.);+#18043 = DIRECTION('',(1.,0.));+#18044 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18045 = PCURVE('',#16487,#18046);+#18046 = DEFINITIONAL_REPRESENTATION('',(#18047),#18051);+#18047 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18048,#18049,#18050),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18048 = CARTESIAN_POINT('',(0.161297142392,0.107849004836));+#18049 = CARTESIAN_POINT('',(0.150150204613,0.119091215588));+#18050 = CARTESIAN_POINT('',(0.122521042597,0.125188685826));+#18051 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18052 = ADVANCED_FACE('',(#18053),#18020,.F.);+#18053 = FACE_BOUND('',#18054,.F.);+#18054 = EDGE_LOOP('',(#18055,#18056,#18079,#18109));+#18055 = ORIENTED_EDGE('',*,*,#18004,.T.);+#18056 = ORIENTED_EDGE('',*,*,#18057,.T.);+#18057 = EDGE_CURVE('',#17982,#18058,#18060,.T.);+#18058 = VERTEX_POINT('',#18059);+#18059 = CARTESIAN_POINT('',(-0.250472644624,-5.144740513393E-03,0.975)+ );+#18060 = SURFACE_CURVE('',#18061,(#18065,#18072),.PCURVE_S1.);+#18061 = LINE('',#18062,#18063);+#18062 = CARTESIAN_POINT('',(-0.229893682571,-9.908389136905E-03,0.975)+ );+#18063 = VECTOR('',#18064,1.);+#18064 = DIRECTION('',(-0.97423893818,0.225518272727,0.));+#18065 = PCURVE('',#18020,#18066);+#18066 = DEFINITIONAL_REPRESENTATION('',(#18067),#18071);+#18067 = LINE('',#18068,#18069);+#18068 = CARTESIAN_POINT('',(0.,-4.E-02));+#18069 = VECTOR('',#18070,1.);+#18070 = DIRECTION('',(1.,0.));+#18071 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18072 = PCURVE('',#16431,#18073);+#18073 = DEFINITIONAL_REPRESENTATION('',(#18074),#18078);+#18074 = LINE('',#18075,#18076);+#18075 = CARTESIAN_POINT('',(0.122521042597,0.125188685826));+#18076 = VECTOR('',#18077,1.);+#18077 = DIRECTION('',(-0.97423893818,0.225518272727));+#18078 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18079 = ORIENTED_EDGE('',*,*,#18080,.F.);+#18080 = EDGE_CURVE('',#18081,#18058,#18083,.T.);+#18081 = VERTEX_POINT('',#18082);+#18082 = CARTESIAN_POINT('',(-0.250472644624,-5.144740513393E-03,1.015)+ );+#18083 = SURFACE_CURVE('',#18084,(#18088,#18095),.PCURVE_S1.);+#18084 = LINE('',#18085,#18086);+#18085 = CARTESIAN_POINT('',(-0.250472644624,-5.144740513393E-03,1.015)+ );+#18086 = VECTOR('',#18087,1.);+#18087 = DIRECTION('',(-0.,-0.,-1.));+#18088 = PCURVE('',#18020,#18089);+#18089 = DEFINITIONAL_REPRESENTATION('',(#18090),#18094);+#18090 = LINE('',#18091,#18092);+#18091 = CARTESIAN_POINT('',(2.112311594937E-02,0.));+#18092 = VECTOR('',#18093,1.);+#18093 = DIRECTION('',(0.,-1.));+#18094 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18095 = PCURVE('',#18096,#18103);+#18096 = SURFACE_OF_LINEAR_EXTRUSION('',#18097,#18101);+#18097 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18098,#18099,#18100),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18098 = CARTESIAN_POINT('',(-0.250472644624,-5.144740513393E-03,1.015)+ );+#18099 = CARTESIAN_POINT('',(-0.290106201172,3.810918898809E-03,1.015));+#18100 = CARTESIAN_POINT('',(-0.308017519996,2.191278366815E-02,1.015));+#18101 = VECTOR('',#18102,1.);+#18102 = DIRECTION('',(0.,0.,1.));+#18103 = DEFINITIONAL_REPRESENTATION('',(#18104),#18108);+#18104 = LINE('',#18105,#18106);+#18105 = CARTESIAN_POINT('',(0.,0.));+#18106 = VECTOR('',#18107,1.);+#18107 = DIRECTION('',(0.,-1.));+#18108 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18109 = ORIENTED_EDGE('',*,*,#18110,.F.);+#18110 = EDGE_CURVE('',#18005,#18081,#18111,.T.);+#18111 = SURFACE_CURVE('',#18112,(#18116,#18123),.PCURVE_S1.);+#18112 = LINE('',#18113,#18114);+#18113 = CARTESIAN_POINT('',(-0.229893682571,-9.908389136905E-03,1.015)+ );+#18114 = VECTOR('',#18115,1.);+#18115 = DIRECTION('',(-0.97423893818,0.225518272727,0.));+#18116 = PCURVE('',#18020,#18117);+#18117 = DEFINITIONAL_REPRESENTATION('',(#18118),#18122);+#18118 = LINE('',#18119,#18120);+#18119 = CARTESIAN_POINT('',(0.,0.));+#18120 = VECTOR('',#18121,1.);+#18121 = DIRECTION('',(1.,0.));+#18122 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18123 = PCURVE('',#16487,#18124);+#18124 = DEFINITIONAL_REPRESENTATION('',(#18125),#18129);+#18125 = LINE('',#18126,#18127);+#18126 = CARTESIAN_POINT('',(0.122521042597,0.125188685826));+#18127 = VECTOR('',#18128,1.);+#18128 = DIRECTION('',(-0.97423893818,0.225518272727));+#18129 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18130 = ADVANCED_FACE('',(#18131),#18096,.F.);+#18131 = FACE_BOUND('',#18132,.F.);+#18132 = EDGE_LOOP('',(#18133,#18134,#18157,#18187));+#18133 = ORIENTED_EDGE('',*,*,#18080,.T.);+#18134 = ORIENTED_EDGE('',*,*,#18135,.T.);+#18135 = EDGE_CURVE('',#18058,#18136,#18138,.T.);+#18136 = VERTEX_POINT('',#18137);+#18137 = CARTESIAN_POINT('',(-0.308017519996,2.191278366815E-02,0.975));+#18138 = SURFACE_CURVE('',#18139,(#18143,#18150),.PCURVE_S1.);+#18139 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18140,#18141,#18142),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18140 = CARTESIAN_POINT('',(-0.250472644624,-5.144740513393E-03,0.975)+ );+#18141 = CARTESIAN_POINT('',(-0.290106201172,3.810918898809E-03,0.975));+#18142 = CARTESIAN_POINT('',(-0.308017519996,2.191278366815E-02,0.975));+#18143 = PCURVE('',#18096,#18144);+#18144 = DEFINITIONAL_REPRESENTATION('',(#18145),#18149);+#18145 = LINE('',#18146,#18147);+#18146 = CARTESIAN_POINT('',(0.,-4.E-02));+#18147 = VECTOR('',#18148,1.);+#18148 = DIRECTION('',(1.,0.));+#18149 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18150 = PCURVE('',#16431,#18151);+#18151 = DEFINITIONAL_REPRESENTATION('',(#18152),#18156);+#18152 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18153,#18154,#18155),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18153 = CARTESIAN_POINT('',(0.101942080543,0.129952334449));+#18154 = CARTESIAN_POINT('',(6.230852399554E-02,0.138907993862));+#18155 = CARTESIAN_POINT('',(4.439720517113E-02,0.157009858631));+#18156 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18157 = ORIENTED_EDGE('',*,*,#18158,.F.);+#18158 = EDGE_CURVE('',#18159,#18136,#18161,.T.);+#18159 = VERTEX_POINT('',#18160);+#18160 = CARTESIAN_POINT('',(-0.308017519996,2.191278366815E-02,1.015));+#18161 = SURFACE_CURVE('',#18162,(#18166,#18173),.PCURVE_S1.);+#18162 = LINE('',#18163,#18164);+#18163 = CARTESIAN_POINT('',(-0.308017519996,2.191278366815E-02,1.015));+#18164 = VECTOR('',#18165,1.);+#18165 = DIRECTION('',(-0.,-0.,-1.));+#18166 = PCURVE('',#18096,#18167);+#18167 = DEFINITIONAL_REPRESENTATION('',(#18168),#18172);+#18168 = LINE('',#18169,#18170);+#18169 = CARTESIAN_POINT('',(1.,0.));+#18170 = VECTOR('',#18171,1.);+#18171 = DIRECTION('',(0.,-1.));+#18172 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18173 = PCURVE('',#18174,#18181);+#18174 = SURFACE_OF_LINEAR_EXTRUSION('',#18175,#18179);+#18175 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18176,#18177,#18178),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18176 = CARTESIAN_POINT('',(-0.308017519996,2.191278366815E-02,1.015));+#18177 = CARTESIAN_POINT('',(-0.325928838821,4.00146484375E-02,1.015));+#18178 = CARTESIAN_POINT('',(-0.325928838821,7.050199962798E-02,1.015));+#18179 = VECTOR('',#18180,1.);+#18180 = DIRECTION('',(0.,0.,1.));+#18181 = DEFINITIONAL_REPRESENTATION('',(#18182),#18186);+#18182 = LINE('',#18183,#18184);+#18183 = CARTESIAN_POINT('',(0.,0.));+#18184 = VECTOR('',#18185,1.);+#18185 = DIRECTION('',(0.,-1.));+#18186 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18187 = ORIENTED_EDGE('',*,*,#18188,.F.);+#18188 = EDGE_CURVE('',#18081,#18159,#18189,.T.);+#18189 = SURFACE_CURVE('',#18190,(#18194,#18201),.PCURVE_S1.);+#18190 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18191,#18192,#18193),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18191 = CARTESIAN_POINT('',(-0.250472644624,-5.144740513393E-03,1.015)+ );+#18192 = CARTESIAN_POINT('',(-0.290106201172,3.810918898809E-03,1.015));+#18193 = CARTESIAN_POINT('',(-0.308017519996,2.191278366815E-02,1.015));+#18194 = PCURVE('',#18096,#18195);+#18195 = DEFINITIONAL_REPRESENTATION('',(#18196),#18200);+#18196 = LINE('',#18197,#18198);+#18197 = CARTESIAN_POINT('',(0.,0.));+#18198 = VECTOR('',#18199,1.);+#18199 = DIRECTION('',(1.,0.));+#18200 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18201 = PCURVE('',#16487,#18202);+#18202 = DEFINITIONAL_REPRESENTATION('',(#18203),#18207);+#18203 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18204,#18205,#18206),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18204 = CARTESIAN_POINT('',(0.101942080543,0.129952334449));+#18205 = CARTESIAN_POINT('',(6.230852399554E-02,0.138907993862));+#18206 = CARTESIAN_POINT('',(4.439720517113E-02,0.157009858631));+#18207 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18208 = ADVANCED_FACE('',(#18209),#18174,.F.);+#18209 = FACE_BOUND('',#18210,.F.);+#18210 = EDGE_LOOP('',(#18211,#18212,#18235,#18265));+#18211 = ORIENTED_EDGE('',*,*,#18158,.T.);+#18212 = ORIENTED_EDGE('',*,*,#18213,.T.);+#18213 = EDGE_CURVE('',#18136,#18214,#18216,.T.);+#18214 = VERTEX_POINT('',#18215);+#18215 = CARTESIAN_POINT('',(-0.325928838821,7.050199962798E-02,0.975));+#18216 = SURFACE_CURVE('',#18217,(#18221,#18228),.PCURVE_S1.);+#18217 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18218,#18219,#18220),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18218 = CARTESIAN_POINT('',(-0.308017519996,2.191278366815E-02,0.975));+#18219 = CARTESIAN_POINT('',(-0.325928838821,4.00146484375E-02,0.975));+#18220 = CARTESIAN_POINT('',(-0.325928838821,7.050199962798E-02,0.975));+#18221 = PCURVE('',#18174,#18222);+#18222 = DEFINITIONAL_REPRESENTATION('',(#18223),#18227);+#18223 = LINE('',#18224,#18225);+#18224 = CARTESIAN_POINT('',(0.,-4.E-02));+#18225 = VECTOR('',#18226,1.);+#18226 = DIRECTION('',(1.,0.));+#18227 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18228 = PCURVE('',#16431,#18229);+#18229 = DEFINITIONAL_REPRESENTATION('',(#18230),#18234);+#18230 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18231,#18232,#18233),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18231 = CARTESIAN_POINT('',(4.439720517113E-02,0.157009858631));+#18232 = CARTESIAN_POINT('',(2.648588634673E-02,0.1751117234));+#18233 = CARTESIAN_POINT('',(2.648588634673E-02,0.205599074591));+#18234 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18235 = ORIENTED_EDGE('',*,*,#18236,.F.);+#18236 = EDGE_CURVE('',#18237,#18214,#18239,.T.);+#18237 = VERTEX_POINT('',#18238);+#18238 = CARTESIAN_POINT('',(-0.325928838821,7.050199962798E-02,1.015));+#18239 = SURFACE_CURVE('',#18240,(#18244,#18251),.PCURVE_S1.);+#18240 = LINE('',#18241,#18242);+#18241 = CARTESIAN_POINT('',(-0.325928838821,7.050199962798E-02,1.015));+#18242 = VECTOR('',#18243,1.);+#18243 = DIRECTION('',(-0.,-0.,-1.));+#18244 = PCURVE('',#18174,#18245);+#18245 = DEFINITIONAL_REPRESENTATION('',(#18246),#18250);+#18246 = LINE('',#18247,#18248);+#18247 = CARTESIAN_POINT('',(1.,0.));+#18248 = VECTOR('',#18249,1.);+#18249 = DIRECTION('',(0.,-1.));+#18250 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18251 = PCURVE('',#18252,#18259);+#18252 = SURFACE_OF_LINEAR_EXTRUSION('',#18253,#18257);+#18253 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18254,#18255,#18256),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18254 = CARTESIAN_POINT('',(-0.325928838821,7.050199962798E-02,1.015));+#18255 = CARTESIAN_POINT('',(-0.325928838821,0.108611188616,1.015));+#18256 = CARTESIAN_POINT('',(-0.300300409226,0.131571974981,1.015));+#18257 = VECTOR('',#18258,1.);+#18258 = DIRECTION('',(0.,0.,1.));+#18259 = DEFINITIONAL_REPRESENTATION('',(#18260),#18264);+#18260 = LINE('',#18261,#18262);+#18261 = CARTESIAN_POINT('',(0.,0.));+#18262 = VECTOR('',#18263,1.);+#18263 = DIRECTION('',(0.,-1.));+#18264 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18265 = ORIENTED_EDGE('',*,*,#18266,.F.);+#18266 = EDGE_CURVE('',#18159,#18237,#18267,.T.);+#18267 = SURFACE_CURVE('',#18268,(#18272,#18279),.PCURVE_S1.);+#18268 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18269,#18270,#18271),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18269 = CARTESIAN_POINT('',(-0.308017519996,2.191278366815E-02,1.015));+#18270 = CARTESIAN_POINT('',(-0.325928838821,4.00146484375E-02,1.015));+#18271 = CARTESIAN_POINT('',(-0.325928838821,7.050199962798E-02,1.015));+#18272 = PCURVE('',#18174,#18273);+#18273 = DEFINITIONAL_REPRESENTATION('',(#18274),#18278);+#18274 = LINE('',#18275,#18276);+#18275 = CARTESIAN_POINT('',(0.,0.));+#18276 = VECTOR('',#18277,1.);+#18277 = DIRECTION('',(1.,0.));+#18278 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18279 = PCURVE('',#16487,#18280);+#18280 = DEFINITIONAL_REPRESENTATION('',(#18281),#18285);+#18281 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18282,#18283,#18284),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18282 = CARTESIAN_POINT('',(4.439720517113E-02,0.157009858631));+#18283 = CARTESIAN_POINT('',(2.648588634673E-02,0.1751117234));+#18284 = CARTESIAN_POINT('',(2.648588634673E-02,0.205599074591));+#18285 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18286 = ADVANCED_FACE('',(#18287),#18252,.F.);+#18287 = FACE_BOUND('',#18288,.F.);+#18288 = EDGE_LOOP('',(#18289,#18290,#18313,#18343));+#18289 = ORIENTED_EDGE('',*,*,#18236,.T.);+#18290 = ORIENTED_EDGE('',*,*,#18291,.T.);+#18291 = EDGE_CURVE('',#18214,#18292,#18294,.T.);+#18292 = VERTEX_POINT('',#18293);+#18293 = CARTESIAN_POINT('',(-0.300300409226,0.131571974981,0.975));+#18294 = SURFACE_CURVE('',#18295,(#18299,#18306),.PCURVE_S1.);+#18295 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18296,#18297,#18298),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18296 = CARTESIAN_POINT('',(-0.325928838821,7.050199962798E-02,0.975));+#18297 = CARTESIAN_POINT('',(-0.325928838821,0.108611188616,0.975));+#18298 = CARTESIAN_POINT('',(-0.300300409226,0.131571974981,0.975));+#18299 = PCURVE('',#18252,#18300);+#18300 = DEFINITIONAL_REPRESENTATION('',(#18301),#18305);+#18301 = LINE('',#18302,#18303);+#18302 = CARTESIAN_POINT('',(0.,-4.E-02));+#18303 = VECTOR('',#18304,1.);+#18304 = DIRECTION('',(1.,0.));+#18305 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18306 = PCURVE('',#16431,#18307);+#18307 = DEFINITIONAL_REPRESENTATION('',(#18308),#18312);+#18308 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18309,#18310,#18311),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18309 = CARTESIAN_POINT('',(2.648588634673E-02,0.205599074591));+#18310 = CARTESIAN_POINT('',(2.648588634673E-02,0.243708263579));+#18311 = CARTESIAN_POINT('',(5.211431594122E-02,0.266669049944));+#18312 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18313 = ORIENTED_EDGE('',*,*,#18314,.F.);+#18314 = EDGE_CURVE('',#18315,#18292,#18317,.T.);+#18315 = VERTEX_POINT('',#18316);+#18316 = CARTESIAN_POINT('',(-0.300300409226,0.131571974981,1.015));+#18317 = SURFACE_CURVE('',#18318,(#18322,#18329),.PCURVE_S1.);+#18318 = LINE('',#18319,#18320);+#18319 = CARTESIAN_POINT('',(-0.300300409226,0.131571974981,1.015));+#18320 = VECTOR('',#18321,1.);+#18321 = DIRECTION('',(-0.,-0.,-1.));+#18322 = PCURVE('',#18252,#18323);+#18323 = DEFINITIONAL_REPRESENTATION('',(#18324),#18328);+#18324 = LINE('',#18325,#18326);+#18325 = CARTESIAN_POINT('',(1.,0.));+#18326 = VECTOR('',#18327,1.);+#18327 = DIRECTION('',(0.,-1.));+#18328 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18329 = PCURVE('',#18330,#18337);+#18330 = SURFACE_OF_LINEAR_EXTRUSION('',#18331,#18335);+#18331 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18332,#18333,#18334),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18332 = CARTESIAN_POINT('',(-0.300300409226,0.131571974981,1.015));+#18333 = CARTESIAN_POINT('',(-0.274671979632,0.154532761347,1.015));+#18334 = CARTESIAN_POINT('',(-0.23218023391,0.154532761347,1.015));+#18335 = VECTOR('',#18336,1.);+#18336 = DIRECTION('',(0.,0.,1.));+#18337 = DEFINITIONAL_REPRESENTATION('',(#18338),#18342);+#18338 = LINE('',#18339,#18340);+#18339 = CARTESIAN_POINT('',(0.,0.));+#18340 = VECTOR('',#18341,1.);+#18341 = DIRECTION('',(0.,-1.));+#18342 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18343 = ORIENTED_EDGE('',*,*,#18344,.F.);+#18344 = EDGE_CURVE('',#18237,#18315,#18345,.T.);+#18345 = SURFACE_CURVE('',#18346,(#18350,#18357),.PCURVE_S1.);+#18346 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18347,#18348,#18349),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18347 = CARTESIAN_POINT('',(-0.325928838821,7.050199962798E-02,1.015));+#18348 = CARTESIAN_POINT('',(-0.325928838821,0.108611188616,1.015));+#18349 = CARTESIAN_POINT('',(-0.300300409226,0.131571974981,1.015));+#18350 = PCURVE('',#18252,#18351);+#18351 = DEFINITIONAL_REPRESENTATION('',(#18352),#18356);+#18352 = LINE('',#18353,#18354);+#18353 = CARTESIAN_POINT('',(0.,0.));+#18354 = VECTOR('',#18355,1.);+#18355 = DIRECTION('',(1.,0.));+#18356 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18357 = PCURVE('',#16487,#18358);+#18358 = DEFINITIONAL_REPRESENTATION('',(#18359),#18363);+#18359 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18360,#18361,#18362),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18360 = CARTESIAN_POINT('',(2.648588634673E-02,0.205599074591));+#18361 = CARTESIAN_POINT('',(2.648588634673E-02,0.243708263579));+#18362 = CARTESIAN_POINT('',(5.211431594122E-02,0.266669049944));+#18363 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18364 = ADVANCED_FACE('',(#18365),#18330,.F.);+#18365 = FACE_BOUND('',#18366,.F.);+#18366 = EDGE_LOOP('',(#18367,#18368,#18391,#18421));+#18367 = ORIENTED_EDGE('',*,*,#18314,.T.);+#18368 = ORIENTED_EDGE('',*,*,#18369,.T.);+#18369 = EDGE_CURVE('',#18292,#18370,#18372,.T.);+#18370 = VERTEX_POINT('',#18371);+#18371 = CARTESIAN_POINT('',(-0.23218023391,0.154532761347,0.975));+#18372 = SURFACE_CURVE('',#18373,(#18377,#18384),.PCURVE_S1.);+#18373 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18374,#18375,#18376),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18374 = CARTESIAN_POINT('',(-0.300300409226,0.131571974981,0.975));+#18375 = CARTESIAN_POINT('',(-0.274671979632,0.154532761347,0.975));+#18376 = CARTESIAN_POINT('',(-0.23218023391,0.154532761347,0.975));+#18377 = PCURVE('',#18330,#18378);+#18378 = DEFINITIONAL_REPRESENTATION('',(#18379),#18383);+#18379 = LINE('',#18380,#18381);+#18380 = CARTESIAN_POINT('',(0.,-4.E-02));+#18381 = VECTOR('',#18382,1.);+#18382 = DIRECTION('',(1.,0.));+#18383 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18384 = PCURVE('',#16431,#18385);+#18385 = DEFINITIONAL_REPRESENTATION('',(#18386),#18390);+#18386 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18387,#18388,#18389),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18387 = CARTESIAN_POINT('',(5.211431594122E-02,0.266669049944));+#18388 = CARTESIAN_POINT('',(7.774274553571E-02,0.28962983631));+#18389 = CARTESIAN_POINT('',(0.120234491257,0.28962983631));+#18390 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18391 = ORIENTED_EDGE('',*,*,#18392,.F.);+#18392 = EDGE_CURVE('',#18393,#18370,#18395,.T.);+#18393 = VERTEX_POINT('',#18394);+#18394 = CARTESIAN_POINT('',(-0.23218023391,0.154532761347,1.015));+#18395 = SURFACE_CURVE('',#18396,(#18400,#18407),.PCURVE_S1.);+#18396 = LINE('',#18397,#18398);+#18397 = CARTESIAN_POINT('',(-0.23218023391,0.154532761347,1.015));+#18398 = VECTOR('',#18399,1.);+#18399 = DIRECTION('',(-0.,-0.,-1.));+#18400 = PCURVE('',#18330,#18401);+#18401 = DEFINITIONAL_REPRESENTATION('',(#18402),#18406);+#18402 = LINE('',#18403,#18404);+#18403 = CARTESIAN_POINT('',(1.,0.));+#18404 = VECTOR('',#18405,1.);+#18405 = DIRECTION('',(0.,-1.));+#18406 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18407 = PCURVE('',#18408,#18415);+#18408 = SURFACE_OF_LINEAR_EXTRUSION('',#18409,#18413);+#18409 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18410,#18411,#18412),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18410 = CARTESIAN_POINT('',(-0.23218023391,0.154532761347,1.015));+#18411 = CARTESIAN_POINT('',(-0.215793282645,0.154532761347,1.015));+#18412 = CARTESIAN_POINT('',(-0.197691417876,0.15081711542,1.015));+#18413 = VECTOR('',#18414,1.);+#18414 = DIRECTION('',(0.,0.,1.));+#18415 = DEFINITIONAL_REPRESENTATION('',(#18416),#18420);+#18416 = LINE('',#18417,#18418);+#18417 = CARTESIAN_POINT('',(0.,0.));+#18418 = VECTOR('',#18419,1.);+#18419 = DIRECTION('',(0.,-1.));+#18420 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18421 = ORIENTED_EDGE('',*,*,#18422,.F.);+#18422 = EDGE_CURVE('',#18315,#18393,#18423,.T.);+#18423 = SURFACE_CURVE('',#18424,(#18428,#18435),.PCURVE_S1.);+#18424 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18425,#18426,#18427),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18425 = CARTESIAN_POINT('',(-0.300300409226,0.131571974981,1.015));+#18426 = CARTESIAN_POINT('',(-0.274671979632,0.154532761347,1.015));+#18427 = CARTESIAN_POINT('',(-0.23218023391,0.154532761347,1.015));+#18428 = PCURVE('',#18330,#18429);+#18429 = DEFINITIONAL_REPRESENTATION('',(#18430),#18434);+#18430 = LINE('',#18431,#18432);+#18431 = CARTESIAN_POINT('',(0.,0.));+#18432 = VECTOR('',#18433,1.);+#18433 = DIRECTION('',(1.,0.));+#18434 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18435 = PCURVE('',#16487,#18436);+#18436 = DEFINITIONAL_REPRESENTATION('',(#18437),#18441);+#18437 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18438,#18439,#18440),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18438 = CARTESIAN_POINT('',(5.211431594122E-02,0.266669049944));+#18439 = CARTESIAN_POINT('',(7.774274553571E-02,0.28962983631));+#18440 = CARTESIAN_POINT('',(0.120234491257,0.28962983631));+#18441 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18442 = ADVANCED_FACE('',(#18443),#18408,.F.);+#18443 = FACE_BOUND('',#18444,.F.);+#18444 = EDGE_LOOP('',(#18445,#18446,#18469,#18492));+#18445 = ORIENTED_EDGE('',*,*,#18392,.T.);+#18446 = ORIENTED_EDGE('',*,*,#18447,.T.);+#18447 = EDGE_CURVE('',#18370,#18448,#18450,.T.);+#18448 = VERTEX_POINT('',#18449);+#18449 = CARTESIAN_POINT('',(-0.197691417876,0.15081711542,0.975));+#18450 = SURFACE_CURVE('',#18451,(#18455,#18462),.PCURVE_S1.);+#18451 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18452,#18453,#18454),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18452 = CARTESIAN_POINT('',(-0.23218023391,0.154532761347,0.975));+#18453 = CARTESIAN_POINT('',(-0.215793282645,0.154532761347,0.975));+#18454 = CARTESIAN_POINT('',(-0.197691417876,0.15081711542,0.975));+#18455 = PCURVE('',#18408,#18456);+#18456 = DEFINITIONAL_REPRESENTATION('',(#18457),#18461);+#18457 = LINE('',#18458,#18459);+#18458 = CARTESIAN_POINT('',(0.,-4.E-02));+#18459 = VECTOR('',#18460,1.);+#18460 = DIRECTION('',(1.,0.));+#18461 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18462 = PCURVE('',#16431,#18463);+#18463 = DEFINITIONAL_REPRESENTATION('',(#18464),#18468);+#18464 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18465,#18466,#18467),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18465 = CARTESIAN_POINT('',(0.120234491257,0.28962983631));+#18466 = CARTESIAN_POINT('',(0.136621442522,0.28962983631));+#18467 = CARTESIAN_POINT('',(0.154723307292,0.285914190383));+#18468 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18469 = ORIENTED_EDGE('',*,*,#18470,.F.);+#18470 = EDGE_CURVE('',#18471,#18448,#18473,.T.);+#18471 = VERTEX_POINT('',#18472);+#18472 = CARTESIAN_POINT('',(-0.197691417876,0.15081711542,1.015));+#18473 = SURFACE_CURVE('',#18474,(#18478,#18485),.PCURVE_S1.);+#18474 = LINE('',#18475,#18476);+#18475 = CARTESIAN_POINT('',(-0.197691417876,0.15081711542,1.015));+#18476 = VECTOR('',#18477,1.);+#18477 = DIRECTION('',(-0.,-0.,-1.));+#18478 = PCURVE('',#18408,#18479);+#18479 = DEFINITIONAL_REPRESENTATION('',(#18480),#18484);+#18480 = LINE('',#18481,#18482);+#18481 = CARTESIAN_POINT('',(1.,0.));+#18482 = VECTOR('',#18483,1.);+#18483 = DIRECTION('',(0.,-1.));+#18484 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18485 = PCURVE('',#16401,#18486);+#18486 = DEFINITIONAL_REPRESENTATION('',(#18487),#18491);+#18487 = LINE('',#18488,#18489);+#18488 = CARTESIAN_POINT('',(0.,0.));+#18489 = VECTOR('',#18490,1.);+#18490 = DIRECTION('',(0.,-1.));+#18491 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18492 = ORIENTED_EDGE('',*,*,#18493,.F.);+#18493 = EDGE_CURVE('',#18393,#18471,#18494,.T.);+#18494 = SURFACE_CURVE('',#18495,(#18499,#18506),.PCURVE_S1.);+#18495 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18496,#18497,#18498),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18496 = CARTESIAN_POINT('',(-0.23218023391,0.154532761347,1.015));+#18497 = CARTESIAN_POINT('',(-0.215793282645,0.154532761347,1.015));+#18498 = CARTESIAN_POINT('',(-0.197691417876,0.15081711542,1.015));+#18499 = PCURVE('',#18408,#18500);+#18500 = DEFINITIONAL_REPRESENTATION('',(#18501),#18505);+#18501 = LINE('',#18502,#18503);+#18502 = CARTESIAN_POINT('',(0.,0.));+#18503 = VECTOR('',#18504,1.);+#18504 = DIRECTION('',(1.,0.));+#18505 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18506 = PCURVE('',#16487,#18507);+#18507 = DEFINITIONAL_REPRESENTATION('',(#18508),#18512);+#18508 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18509,#18510,#18511),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18509 = CARTESIAN_POINT('',(0.120234491257,0.28962983631));+#18510 = CARTESIAN_POINT('',(0.136621442522,0.28962983631));+#18511 = CARTESIAN_POINT('',(0.154723307292,0.285914190383));+#18512 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18513 = ADVANCED_FACE('',(#18514),#16401,.F.);+#18514 = FACE_BOUND('',#18515,.F.);+#18515 = EDGE_LOOP('',(#18516,#18517,#18538,#18539));+#18516 = ORIENTED_EDGE('',*,*,#18470,.T.);+#18517 = ORIENTED_EDGE('',*,*,#18518,.T.);+#18518 = EDGE_CURVE('',#18448,#16381,#18519,.T.);+#18519 = SURFACE_CURVE('',#18520,(#18524,#18531),.PCURVE_S1.);+#18520 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18521,#18522,#18523),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18521 = CARTESIAN_POINT('',(-0.197691417876,0.15081711542,0.975));+#18522 = CARTESIAN_POINT('',(-0.179589553106,0.147101469494,0.975));+#18523 = CARTESIAN_POINT('',(-0.159582228888,0.139670177641,0.975));+#18524 = PCURVE('',#16401,#18525);+#18525 = DEFINITIONAL_REPRESENTATION('',(#18526),#18530);+#18526 = LINE('',#18527,#18528);+#18527 = CARTESIAN_POINT('',(0.,-4.E-02));+#18528 = VECTOR('',#18529,1.);+#18529 = DIRECTION('',(1.,0.));+#18530 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18531 = PCURVE('',#16431,#18532);+#18532 = DEFINITIONAL_REPRESENTATION('',(#18533),#18537);+#18533 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18534,#18535,#18536),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18534 = CARTESIAN_POINT('',(0.154723307292,0.285914190383));+#18535 = CARTESIAN_POINT('',(0.172825172061,0.282198544457));+#18536 = CARTESIAN_POINT('',(0.19283249628,0.274767252604));+#18537 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18538 = ORIENTED_EDGE('',*,*,#16378,.F.);+#18539 = ORIENTED_EDGE('',*,*,#18540,.F.);+#18540 = EDGE_CURVE('',#18471,#16379,#18541,.T.);+#18541 = SURFACE_CURVE('',#18542,(#18546,#18553),.PCURVE_S1.);+#18542 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18543,#18544,#18545),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18543 = CARTESIAN_POINT('',(-0.197691417876,0.15081711542,1.015));+#18544 = CARTESIAN_POINT('',(-0.179589553106,0.147101469494,1.015));+#18545 = CARTESIAN_POINT('',(-0.159582228888,0.139670177641,1.015));+#18546 = PCURVE('',#16401,#18547);+#18547 = DEFINITIONAL_REPRESENTATION('',(#18548),#18552);+#18548 = LINE('',#18549,#18550);+#18549 = CARTESIAN_POINT('',(0.,0.));+#18550 = VECTOR('',#18551,1.);+#18551 = DIRECTION('',(1.,0.));+#18552 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18553 = PCURVE('',#16487,#18554);+#18554 = DEFINITIONAL_REPRESENTATION('',(#18555),#18559);+#18555 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18556,#18557,#18558),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18556 = CARTESIAN_POINT('',(0.154723307292,0.285914190383));+#18557 = CARTESIAN_POINT('',(0.172825172061,0.282198544457));+#18558 = CARTESIAN_POINT('',(0.19283249628,0.274767252604));+#18559 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18560 = ADVANCED_FACE('',(#18561),#16487,.T.);+#18561 = FACE_BOUND('',#18562,.F.);+#18562 = EDGE_LOOP('',(#18563,#18564,#18565,#18566,#18567,#18568,#18569,+ #18570,#18571,#18572,#18573,#18574,#18575,#18576,#18577,#18578,+ #18579,#18580,#18581,#18582,#18583,#18584,#18585,#18586,#18587,+ #18588,#18589,#18590));+#18563 = ORIENTED_EDGE('',*,*,#16473,.T.);+#18564 = ORIENTED_EDGE('',*,*,#16556,.T.);+#18565 = ORIENTED_EDGE('',*,*,#16634,.T.);+#18566 = ORIENTED_EDGE('',*,*,#16712,.T.);+#18567 = ORIENTED_EDGE('',*,*,#16790,.T.);+#18568 = ORIENTED_EDGE('',*,*,#16868,.T.);+#18569 = ORIENTED_EDGE('',*,*,#16944,.T.);+#18570 = ORIENTED_EDGE('',*,*,#17022,.T.);+#18571 = ORIENTED_EDGE('',*,*,#17100,.T.);+#18572 = ORIENTED_EDGE('',*,*,#17178,.T.);+#18573 = ORIENTED_EDGE('',*,*,#17256,.T.);+#18574 = ORIENTED_EDGE('',*,*,#17334,.T.);+#18575 = ORIENTED_EDGE('',*,*,#17412,.T.);+#18576 = ORIENTED_EDGE('',*,*,#17488,.T.);+#18577 = ORIENTED_EDGE('',*,*,#17566,.T.);+#18578 = ORIENTED_EDGE('',*,*,#17644,.T.);+#18579 = ORIENTED_EDGE('',*,*,#17722,.T.);+#18580 = ORIENTED_EDGE('',*,*,#17800,.T.);+#18581 = ORIENTED_EDGE('',*,*,#17878,.T.);+#18582 = ORIENTED_EDGE('',*,*,#17956,.T.);+#18583 = ORIENTED_EDGE('',*,*,#18032,.T.);+#18584 = ORIENTED_EDGE('',*,*,#18110,.T.);+#18585 = ORIENTED_EDGE('',*,*,#18188,.T.);+#18586 = ORIENTED_EDGE('',*,*,#18266,.T.);+#18587 = ORIENTED_EDGE('',*,*,#18344,.T.);+#18588 = ORIENTED_EDGE('',*,*,#18422,.T.);+#18589 = ORIENTED_EDGE('',*,*,#18493,.T.);+#18590 = ORIENTED_EDGE('',*,*,#18540,.T.);+#18591 = ADVANCED_FACE('',(#18592),#16431,.F.);+#18592 = FACE_BOUND('',#18593,.T.);+#18593 = EDGE_LOOP('',(#18594,#18595,#18596,#18597,#18598,#18599,#18600,+ #18601,#18602,#18603,#18604,#18605,#18606,#18607,#18608,#18609,+ #18610,#18611,#18612,#18613,#18614,#18615,#18616,#18617,#18618,+ #18619,#18620,#18621));+#18594 = ORIENTED_EDGE('',*,*,#16415,.T.);+#18595 = ORIENTED_EDGE('',*,*,#16503,.T.);+#18596 = ORIENTED_EDGE('',*,*,#16581,.T.);+#18597 = ORIENTED_EDGE('',*,*,#16659,.T.);+#18598 = ORIENTED_EDGE('',*,*,#16737,.T.);+#18599 = ORIENTED_EDGE('',*,*,#16815,.T.);+#18600 = ORIENTED_EDGE('',*,*,#16893,.T.);+#18601 = ORIENTED_EDGE('',*,*,#16969,.T.);+#18602 = ORIENTED_EDGE('',*,*,#17047,.T.);+#18603 = ORIENTED_EDGE('',*,*,#17125,.T.);+#18604 = ORIENTED_EDGE('',*,*,#17203,.T.);+#18605 = ORIENTED_EDGE('',*,*,#17281,.T.);+#18606 = ORIENTED_EDGE('',*,*,#17359,.T.);+#18607 = ORIENTED_EDGE('',*,*,#17437,.T.);+#18608 = ORIENTED_EDGE('',*,*,#17513,.T.);+#18609 = ORIENTED_EDGE('',*,*,#17591,.T.);+#18610 = ORIENTED_EDGE('',*,*,#17669,.T.);+#18611 = ORIENTED_EDGE('',*,*,#17747,.T.);+#18612 = ORIENTED_EDGE('',*,*,#17825,.T.);+#18613 = ORIENTED_EDGE('',*,*,#17903,.T.);+#18614 = ORIENTED_EDGE('',*,*,#17981,.T.);+#18615 = ORIENTED_EDGE('',*,*,#18057,.T.);+#18616 = ORIENTED_EDGE('',*,*,#18135,.T.);+#18617 = ORIENTED_EDGE('',*,*,#18213,.T.);+#18618 = ORIENTED_EDGE('',*,*,#18291,.T.);+#18619 = ORIENTED_EDGE('',*,*,#18369,.T.);+#18620 = ORIENTED_EDGE('',*,*,#18447,.T.);+#18621 = ORIENTED_EDGE('',*,*,#18518,.T.);+#18622 = MANIFOLD_SOLID_BREP('',#18623);+#18623 = CLOSED_SHELL('',(#18624,#18744,#18820,#18896,#18972,#19048,+ #19119,#19166,#19176));+#18624 = ADVANCED_FACE('',(#18625),#18639,.F.);+#18625 = FACE_BOUND('',#18626,.F.);+#18626 = EDGE_LOOP('',(#18627,#18662,#18690,#18718));+#18627 = ORIENTED_EDGE('',*,*,#18628,.T.);+#18628 = EDGE_CURVE('',#18629,#18631,#18633,.T.);+#18629 = VERTEX_POINT('',#18630);+#18630 = CARTESIAN_POINT('',(-9.098568870908E-02,0.116995210193,1.015));+#18631 = VERTEX_POINT('',#18632);+#18632 = CARTESIAN_POINT('',(-9.098568870908E-02,0.116995210193,0.975));+#18633 = SURFACE_CURVE('',#18634,(#18638,#18650),.PCURVE_S1.);+#18634 = LINE('',#18635,#18636);+#18635 = CARTESIAN_POINT('',(-9.098568870908E-02,0.116995210193,1.015));+#18636 = VECTOR('',#18637,1.);+#18637 = DIRECTION('',(-0.,-0.,-1.));+#18638 = PCURVE('',#18639,#18644);+#18639 = PLANE('',#18640);+#18640 = AXIS2_PLACEMENT_3D('',#18641,#18642,#18643);+#18641 = CARTESIAN_POINT('',(-9.098568870908E-02,0.116995210193,1.015));+#18642 = DIRECTION('',(1.,0.,0.));+#18643 = DIRECTION('',(0.,1.,0.));+#18644 = DEFINITIONAL_REPRESENTATION('',(#18645),#18649);+#18645 = LINE('',#18646,#18647);+#18646 = CARTESIAN_POINT('',(0.,0.));+#18647 = VECTOR('',#18648,1.);+#18648 = DIRECTION('',(0.,-1.));+#18649 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18650 = PCURVE('',#18651,#18656);+#18651 = PLANE('',#18652);+#18652 = AXIS2_PLACEMENT_3D('',#18653,#18654,#18655);+#18653 = CARTESIAN_POINT('',(4.525466192336E-02,0.116995210193,1.015));+#18654 = DIRECTION('',(0.,1.,0.));+#18655 = DIRECTION('',(-1.,0.,0.));+#18656 = DEFINITIONAL_REPRESENTATION('',(#18657),#18661);+#18657 = LINE('',#18658,#18659);+#18658 = CARTESIAN_POINT('',(0.136240350632,0.));+#18659 = VECTOR('',#18660,1.);+#18660 = DIRECTION('',(0.,-1.));+#18661 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18662 = ORIENTED_EDGE('',*,*,#18663,.T.);+#18663 = EDGE_CURVE('',#18631,#18664,#18666,.T.);+#18664 = VERTEX_POINT('',#18665);+#18665 = CARTESIAN_POINT('',(-9.098568870908E-02,0.149388020833,0.975));+#18666 = SURFACE_CURVE('',#18667,(#18671,#18678),.PCURVE_S1.);+#18667 = LINE('',#18668,#18669);+#18668 = CARTESIAN_POINT('',(-9.098568870908E-02,0.116995210193,0.975));+#18669 = VECTOR('',#18670,1.);+#18670 = DIRECTION('',(0.,1.,0.));+#18671 = PCURVE('',#18639,#18672);+#18672 = DEFINITIONAL_REPRESENTATION('',(#18673),#18677);+#18673 = LINE('',#18674,#18675);+#18674 = CARTESIAN_POINT('',(0.,-4.E-02));+#18675 = VECTOR('',#18676,1.);+#18676 = DIRECTION('',(1.,0.));+#18677 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18678 = PCURVE('',#18679,#18684);+#18679 = PLANE('',#18680);+#18680 = AXIS2_PLACEMENT_3D('',#18681,#18682,#18683);+#18681 = CARTESIAN_POINT('',(-0.117471575056,-0.135097074963,0.975));+#18682 = DIRECTION('',(0.,0.,1.));+#18683 = DIRECTION('',(1.,0.,0.));+#18684 = DEFINITIONAL_REPRESENTATION('',(#18685),#18689);+#18685 = LINE('',#18686,#18687);+#18686 = CARTESIAN_POINT('',(2.648588634673E-02,0.252092285156));+#18687 = VECTOR('',#18688,1.);+#18688 = DIRECTION('',(0.,1.));+#18689 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18690 = ORIENTED_EDGE('',*,*,#18691,.F.);+#18691 = EDGE_CURVE('',#18692,#18664,#18694,.T.);+#18692 = VERTEX_POINT('',#18693);+#18693 = CARTESIAN_POINT('',(-9.098568870908E-02,0.149388020833,1.015));+#18694 = SURFACE_CURVE('',#18695,(#18699,#18706),.PCURVE_S1.);+#18695 = LINE('',#18696,#18697);+#18696 = CARTESIAN_POINT('',(-9.098568870908E-02,0.149388020833,1.015));+#18697 = VECTOR('',#18698,1.);+#18698 = DIRECTION('',(-0.,-0.,-1.));+#18699 = PCURVE('',#18639,#18700);+#18700 = DEFINITIONAL_REPRESENTATION('',(#18701),#18705);+#18701 = LINE('',#18702,#18703);+#18702 = CARTESIAN_POINT('',(3.239281063988E-02,0.));+#18703 = VECTOR('',#18704,1.);+#18704 = DIRECTION('',(0.,-1.));+#18705 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18706 = PCURVE('',#18707,#18712);+#18707 = PLANE('',#18708);+#18708 = AXIS2_PLACEMENT_3D('',#18709,#18710,#18711);+#18709 = CARTESIAN_POINT('',(-9.098568870908E-02,0.149388020833,1.015));+#18710 = DIRECTION('',(0.,-1.,0.));+#18711 = DIRECTION('',(1.,0.,0.));+#18712 = DEFINITIONAL_REPRESENTATION('',(#18713),#18717);+#18713 = LINE('',#18714,#18715);+#18714 = CARTESIAN_POINT('',(0.,0.));+#18715 = VECTOR('',#18716,1.);+#18716 = DIRECTION('',(0.,-1.));+#18717 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18718 = ORIENTED_EDGE('',*,*,#18719,.F.);+#18719 = EDGE_CURVE('',#18629,#18692,#18720,.T.);+#18720 = SURFACE_CURVE('',#18721,(#18725,#18732),.PCURVE_S1.);+#18721 = LINE('',#18722,#18723);+#18722 = CARTESIAN_POINT('',(-9.098568870908E-02,0.116995210193,1.015));+#18723 = VECTOR('',#18724,1.);+#18724 = DIRECTION('',(0.,1.,0.));+#18725 = PCURVE('',#18639,#18726);+#18726 = DEFINITIONAL_REPRESENTATION('',(#18727),#18731);+#18727 = LINE('',#18728,#18729);+#18728 = CARTESIAN_POINT('',(0.,0.));+#18729 = VECTOR('',#18730,1.);+#18730 = DIRECTION('',(1.,0.));+#18731 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18732 = PCURVE('',#18733,#18738);+#18733 = PLANE('',#18734);+#18734 = AXIS2_PLACEMENT_3D('',#18735,#18736,#18737);+#18735 = CARTESIAN_POINT('',(-0.117471575056,-0.135097074963,1.015));+#18736 = DIRECTION('',(0.,0.,1.));+#18737 = DIRECTION('',(1.,0.,0.));+#18738 = DEFINITIONAL_REPRESENTATION('',(#18739),#18743);+#18739 = LINE('',#18740,#18741);+#18740 = CARTESIAN_POINT('',(2.648588634673E-02,0.252092285156));+#18741 = VECTOR('',#18742,1.);+#18742 = DIRECTION('',(0.,1.));+#18743 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18744 = ADVANCED_FACE('',(#18745),#18707,.F.);+#18745 = FACE_BOUND('',#18746,.F.);+#18746 = EDGE_LOOP('',(#18747,#18748,#18771,#18799));+#18747 = ORIENTED_EDGE('',*,*,#18691,.T.);+#18748 = ORIENTED_EDGE('',*,*,#18749,.T.);+#18749 = EDGE_CURVE('',#18664,#18750,#18752,.T.);+#18750 = VERTEX_POINT('',#18751);+#18751 = CARTESIAN_POINT('',(8.812749953497E-02,0.149388020833,0.975));+#18752 = SURFACE_CURVE('',#18753,(#18757,#18764),.PCURVE_S1.);+#18753 = LINE('',#18754,#18755);+#18754 = CARTESIAN_POINT('',(-9.098568870908E-02,0.149388020833,0.975));+#18755 = VECTOR('',#18756,1.);+#18756 = DIRECTION('',(1.,0.,0.));+#18757 = PCURVE('',#18707,#18758);+#18758 = DEFINITIONAL_REPRESENTATION('',(#18759),#18763);+#18759 = LINE('',#18760,#18761);+#18760 = CARTESIAN_POINT('',(0.,-4.E-02));+#18761 = VECTOR('',#18762,1.);+#18762 = DIRECTION('',(1.,0.));+#18763 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18764 = PCURVE('',#18679,#18765);+#18765 = DEFINITIONAL_REPRESENTATION('',(#18766),#18770);+#18766 = LINE('',#18767,#18768);+#18767 = CARTESIAN_POINT('',(2.648588634673E-02,0.284485095796));+#18768 = VECTOR('',#18769,1.);+#18769 = DIRECTION('',(1.,0.));+#18770 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18771 = ORIENTED_EDGE('',*,*,#18772,.F.);+#18772 = EDGE_CURVE('',#18773,#18750,#18775,.T.);+#18773 = VERTEX_POINT('',#18774);+#18774 = CARTESIAN_POINT('',(8.812749953497E-02,0.149388020833,1.015));+#18775 = SURFACE_CURVE('',#18776,(#18780,#18787),.PCURVE_S1.);+#18776 = LINE('',#18777,#18778);+#18777 = CARTESIAN_POINT('',(8.812749953497E-02,0.149388020833,1.015));+#18778 = VECTOR('',#18779,1.);+#18779 = DIRECTION('',(-0.,-0.,-1.));+#18780 = PCURVE('',#18707,#18781);+#18781 = DEFINITIONAL_REPRESENTATION('',(#18782),#18786);+#18782 = LINE('',#18783,#18784);+#18783 = CARTESIAN_POINT('',(0.179113188244,0.));+#18784 = VECTOR('',#18785,1.);+#18785 = DIRECTION('',(0.,-1.));+#18786 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18787 = PCURVE('',#18788,#18793);+#18788 = PLANE('',#18789);+#18789 = AXIS2_PLACEMENT_3D('',#18790,#18791,#18792);+#18790 = CARTESIAN_POINT('',(8.812749953497E-02,0.149388020833,1.015));+#18791 = DIRECTION('',(-1.,0.,0.));+#18792 = DIRECTION('',(0.,-1.,0.));+#18793 = DEFINITIONAL_REPRESENTATION('',(#18794),#18798);+#18794 = LINE('',#18795,#18796);+#18795 = CARTESIAN_POINT('',(0.,0.));+#18796 = VECTOR('',#18797,1.);+#18797 = DIRECTION('',(0.,-1.));+#18798 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18799 = ORIENTED_EDGE('',*,*,#18800,.F.);+#18800 = EDGE_CURVE('',#18692,#18773,#18801,.T.);+#18801 = SURFACE_CURVE('',#18802,(#18806,#18813),.PCURVE_S1.);+#18802 = LINE('',#18803,#18804);+#18803 = CARTESIAN_POINT('',(-9.098568870908E-02,0.149388020833,1.015));+#18804 = VECTOR('',#18805,1.);+#18805 = DIRECTION('',(1.,0.,0.));+#18806 = PCURVE('',#18707,#18807);+#18807 = DEFINITIONAL_REPRESENTATION('',(#18808),#18812);+#18808 = LINE('',#18809,#18810);+#18809 = CARTESIAN_POINT('',(0.,0.));+#18810 = VECTOR('',#18811,1.);+#18811 = DIRECTION('',(1.,0.));+#18812 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18813 = PCURVE('',#18733,#18814);+#18814 = DEFINITIONAL_REPRESENTATION('',(#18815),#18819);+#18815 = LINE('',#18816,#18817);+#18816 = CARTESIAN_POINT('',(2.648588634673E-02,0.284485095796));+#18817 = VECTOR('',#18818,1.);+#18818 = DIRECTION('',(1.,0.));+#18819 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18820 = ADVANCED_FACE('',(#18821),#18788,.F.);+#18821 = FACE_BOUND('',#18822,.F.);+#18822 = EDGE_LOOP('',(#18823,#18824,#18847,#18875));+#18823 = ORIENTED_EDGE('',*,*,#18772,.T.);+#18824 = ORIENTED_EDGE('',*,*,#18825,.T.);+#18825 = EDGE_CURVE('',#18750,#18826,#18828,.T.);+#18826 = VERTEX_POINT('',#18827);+#18827 = CARTESIAN_POINT('',(8.812749953497E-02,0.133001069568,0.975));+#18828 = SURFACE_CURVE('',#18829,(#18833,#18840),.PCURVE_S1.);+#18829 = LINE('',#18830,#18831);+#18830 = CARTESIAN_POINT('',(8.812749953497E-02,0.149388020833,0.975));+#18831 = VECTOR('',#18832,1.);+#18832 = DIRECTION('',(0.,-1.,0.));+#18833 = PCURVE('',#18788,#18834);+#18834 = DEFINITIONAL_REPRESENTATION('',(#18835),#18839);+#18835 = LINE('',#18836,#18837);+#18836 = CARTESIAN_POINT('',(0.,-4.E-02));+#18837 = VECTOR('',#18838,1.);+#18838 = DIRECTION('',(1.,0.));+#18839 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18840 = PCURVE('',#18679,#18841);+#18841 = DEFINITIONAL_REPRESENTATION('',(#18842),#18846);+#18842 = LINE('',#18843,#18844);+#18843 = CARTESIAN_POINT('',(0.205599074591,0.284485095796));+#18844 = VECTOR('',#18845,1.);+#18845 = DIRECTION('',(0.,-1.));+#18846 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18847 = ORIENTED_EDGE('',*,*,#18848,.F.);+#18848 = EDGE_CURVE('',#18849,#18826,#18851,.T.);