main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tps7a8801rtjr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tps7a8801rtjr: viewers · Ray
package.json tps7a8801rtjr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tps7a8801rtjr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/tps7a8801rtjr · Ray
tps7a8801rtjr-etched.fit.json tps7a8801rtjr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps7a8801rtjr-etched.glb tps7a8801rtjr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps7a8801rtjr-etched.step tps7a8801rtjr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps7a8801rtjr.glb Publish 0.1.0 · Ray
tps7a8801rtjr.kicad_mod Publish 0.1.0 · Ray
tps7a8801rtjr.kicad_sym Publish 0.1.0 · Ray
tps7a8801rtjr.lbr Publish 0.1.0 · Ray
tps7a8801rtjr.step Publish 0.1.0 · Ray

TPS7A8801RTJR

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · QFN-20-EP(4x4)

TPS7A8801RTJR from Texas Instruments, in a QFN-20-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN1 power_in Input pin for LDO1 requiring 10 µF or greater input capacitor for robust operation.
2 IN1 power_in Input pin for LDO1 requiring 10 µF or greater input capacitor for robust operation.
3 GND power_in Device ground connected to thermal pad for thermal performance.
4 IN2 power_in Input pin for LDO2 requiring 10 µF or greater input capacitor for robust operation.
5 IN2 power_in Input pin for LDO2 requiring 10 µF or greater input capacitor for robust operation.
6 EN2 input Enable pin for LDO2 that activates regulator when above 1.1 V and deactivates when below 0.4 V.
7 NR/SS2 passive Noise reduction and soft-start capacitor connection for LDO2 that reduces output RMS noise and sets output ramp rate.
8 SS_CTRL2 input Soft-start control pin for LDO2 that selects normal charging (6.2 µA typ) or fast charging (100 µA typ) of noise-reduction capacitor.
9 PG2 output Open-drain power-good indicator pin for LDO2 that pulls low when output voltage falls below 88.9% of target voltage.
10 FB2 input Feedback pin for LDO2 serving as input to control loop error amplifier and sets output voltage via external resistor divider.
11 OUT2 power_out Regulated output 2 requiring 10 µF or greater output capacitor to GND for stability.
12 OUT2 power_out Regulated output 2 requiring 10 µF or greater output capacitor to GND for stability.
13 GND power_in Device ground connected to thermal pad for thermal performance.
14 OUT1 power_out Regulated output 1 requiring 10 µF or greater output capacitor to GND for stability.
15 OUT1 power_out Regulated output 1 requiring 10 µF or greater output capacitor to GND for stability.
16 FB1 input Feedback pin for LDO1 serving as input to control loop error amplifier and sets output voltage via external resistor divider.
17 PG1 output Open-drain power-good indicator pin for LDO1 that pulls low when output voltage falls below 88.9% of target voltage.
18 SS_CTRL1 input Soft-start control pin for LDO1 that selects normal charging (6.2 µA typ) or fast charging (100 µA typ) of noise-reduction capacitor.
19 NR/SS1 passive Noise reduction and soft-start capacitor connection for LDO1 that reduces output RMS noise and sets output ramp rate.
20 EN1 input Enable pin for LDO1 that activates regulator when above 1.1 V and deactivates when below 0.4 V.
21 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package QFN-20-EP(4x4)
Category Power Management (PMIC)
Pins 21

CAD (KiCad official)

  • Symbol: TPS7A8801RTJR
  • Footprint: Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm
  • 3D model: QFN-20-EP(4x4) (KiCad packages3D, STEP)
  • 3D model files: tps7a8801rtjr-etched.step / tps7a8801rtjr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps7a8801rtjr.step / tps7a8801rtjr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (36 pp, sha256 322cb027ed338f57, retrieved 2026-09-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF