← Commit history
page.json+18−15@@ -38,13 +38,13 @@ "number": "1", "name": "IN1", "type": "power_in",- "description": "Input supply pin for LDO 1 requiring 10 \u00b5F or greater input capacitor located as close as practical."+ "description": "Input supply pin for LDO 1 requiring 10 µF or greater input capacitor located as close as practical." }, { "number": "2", "name": "IN1", "type": "power_in",- "description": "Input supply pin for LDO 1 requiring 10 \u00b5F or greater input capacitor located as close as practical."+ "description": "Input supply pin for LDO 1 requiring 10 µF or greater input capacitor located as close as practical." }, { "number": "3",@@ -56,25 +56,25 @@ "number": "4", "name": "IN2", "type": "power_in",- "description": "Input supply pin for LDO 2 requiring 10 \u00b5F or greater input capacitor located as close as practical."+ "description": "Input supply pin for LDO 2 requiring 10 µF or greater input capacitor located as close as practical." }, { "number": "5", "name": "IN2", "type": "power_in",- "description": "Input supply pin for LDO 2 requiring 10 \u00b5F or greater input capacitor located as close as practical."+ "description": "Input supply pin for LDO 2 requiring 10 µF or greater input capacitor located as close as practical." }, { "number": "6", "name": "EN2", "type": "input",- "description": "Enable pin for LDO 2; enables when VEN \u2265 1.1V, disables when VEN \u2264 0.4V; connect to IN2 if enable function not used."+ "description": "Enable pin for LDO 2; enables when VEN ≥ 1.1V, disables when VEN ≤ 0.4V; connect to IN2 if enable function not used." }, { "number": "7", "name": "NR/SS2", "type": "passive",- "description": "Noise-reduction and soft-start pin for LDO 2; capacitor value 10 nF to 10 \u00b5F recommended to reduce reference noise and enable soft-start function."+ "description": "Noise-reduction and soft-start pin for LDO 2; capacitor value 10 nF to 10 µF recommended to reduce reference noise and enable soft-start function." }, { "number": "8",@@ -86,7 +86,7 @@ "number": "9", "name": "PG2", "type": "tri_state",- "description": "Open-drain power-good indicator for LDO 2; requires 10 k\u03a9 to 100 k\u03a9 external pullup resistor; asserts when output \u2265 88.9% of target voltage."+ "description": "Open-drain power-good indicator for LDO 2; requires 10 kΩ to 100 kΩ external pullup resistor; asserts when output ≥ 88.9% of target voltage." }, { "number": "10",@@ -98,13 +98,13 @@ "number": "11", "name": "OUT2", "type": "output",- "description": "Regulated output for LDO 2 with range 0.8V to 5.2V; requires 10 \u00b5F or greater ceramic capacitor placed close to output."+ "description": "Regulated output for LDO 2 with range 0.8V to 5.2V; requires 10 µF or greater ceramic capacitor placed close to output." }, { "number": "12", "name": "OUT2", "type": "output",- "description": "Regulated output for LDO 2 with range 0.8V to 5.2V; requires 10 \u00b5F or greater ceramic capacitor placed close to output."+ "description": "Regulated output for LDO 2 with range 0.8V to 5.2V; requires 10 µF or greater ceramic capacitor placed close to output." }, { "number": "13",@@ -116,13 +116,13 @@ "number": "14", "name": "OUT1", "type": "output",- "description": "Regulated output for LDO 1 with range 0.8V to 5.2V; requires 10 \u00b5F or greater ceramic capacitor placed close to output."+ "description": "Regulated output for LDO 1 with range 0.8V to 5.2V; requires 10 µF or greater ceramic capacitor placed close to output." }, { "number": "15", "name": "OUT1", "type": "output",- "description": "Regulated output for LDO 1 with range 0.8V to 5.2V; requires 10 \u00b5F or greater ceramic capacitor placed close to output."+ "description": "Regulated output for LDO 1 with range 0.8V to 5.2V; requires 10 µF or greater ceramic capacitor placed close to output." }, { "number": "16",@@ -134,7 +134,7 @@ "number": "17", "name": "PG1", "type": "tri_state",- "description": "Open-drain power-good indicator for LDO 1; requires 10 k\u03a9 to 100 k\u03a9 external pullup resistor; asserts when output \u2265 88.9% of target voltage."+ "description": "Open-drain power-good indicator for LDO 1; requires 10 kΩ to 100 kΩ external pullup resistor; asserts when output ≥ 88.9% of target voltage." }, { "number": "18",@@ -146,13 +146,13 @@ "number": "19", "name": "NR/SS1", "type": "passive",- "description": "Noise-reduction and soft-start pin for LDO 1; capacitor value 10 nF to 10 \u00b5F recommended to reduce reference noise and enable soft-start function."+ "description": "Noise-reduction and soft-start pin for LDO 1; capacitor value 10 nF to 10 µF recommended to reduce reference noise and enable soft-start function." }, { "number": "20", "name": "EN1", "type": "input",- "description": "Enable pin for LDO 1; enables when VEN \u2265 1.1V, disables when VEN \u2264 0.4V; connect to IN1 if enable function not used."+ "description": "Enable pin for LDO 1; enables when VEN ≥ 1.1V, disables when VEN ≤ 0.4V; connect to IN1 if enable function not used." }, { "number": "21",@@ -238,5 +238,8 @@ "docs/tps7a8701rtjr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }