main
Ray Initial commit: component/tps7a8300argrr 4f86809

TPS7A8300ARGRR

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · VQFN-20-EP(3.5x3.5)

TPS7A8300ARGRR from Texas Instruments, in a VQFN-20-EP(3.5x3.5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Regulated output requiring 47-µF minimum ceramic capacitor to ground for stability.
2 SNS input Output voltage sense input connecting internal R1 resistor to output load side, use only with ANY-OUT feature or leave floating.
3 FB input Feedback pin connected to error amplifier; optional 10-nF feed-forward capacitor to OUT improves ac performance.
4 PG tri_state Open-drain power-good output indicating when output voltage reaches target threshold VIT(PG).
5 50mV input ANY-OUT programmable voltage setting input; connect to GND, SNS, or leave floating to select output voltage.
6 100mV input ANY-OUT programmable voltage setting input; connect to GND, SNS, or leave floating to select output voltage.
7 200mV input ANY-OUT programmable voltage setting input; connect to GND, SNS, or leave floating to select output voltage.
8 GND power_in Ground pin requiring low-impedance connection to thermal pad and other ground pins.
9 400mV input ANY-OUT programmable voltage setting input; connect to GND, SNS, or leave floating to select output voltage.
10 800mV input ANY-OUT programmable voltage setting input; connect to GND, SNS, or leave floating to select output voltage.
11 1.6V input ANY-OUT programmable voltage setting input; connect to GND, SNS, or leave floating to select output voltage.
12 BIAS power_in Bias supply input (3.0V to 6.5V) enabling low-input voltage operation; requires 1-µF minimum capacitor to ground.
13 NR/SS passive Noise-reduction and soft-start capacitor pin; external 10-nF minimum capacitor to ground reduces reference noise and enables soft-start.
14 EN input Enable input; logic high enables device, logic low disables; connect to IN or BIAS if unused.
15 IN power_in Input supply voltage pin (1.1V to 6.5V) requiring 10-µF minimum ceramic capacitor to ground for supply filtering.
16 IN power_in Input supply voltage pin (1.1V to 6.5V) requiring 10-µF minimum ceramic capacitor to ground for supply filtering.
17 IN power_in Input supply voltage pin (1.1V to 6.5V) requiring 10-µF minimum ceramic capacitor to ground for supply filtering.
18 GND power_in Ground pin requiring low-impedance connection to thermal pad and other ground pins.
19 OUT output Regulated output requiring 47-µF minimum ceramic capacitor to ground for stability.
20 OUT output Regulated output requiring 47-µF minimum ceramic capacitor to ground for stability.
21 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-20-EP(3.5x3.5)
Category Power Management (PMIC)
Pins 21

CAD (KiCad official)

  • Symbol: TPS7A8300ARGRR
  • Footprint: Package_DFN_QFN:QFN-20-1EP_3.5x3.5mm_P0.5mm_EP2x2mm
  • 3D model: VQFN-20-EP(3.5x3.5), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal QFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: tps7a8300argrr-etched.step / tps7a8300argrr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps7a8300argrr.step / tps7a8300argrr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (63 pp, sha256 4b23b1f5239092dc, retrieved 2026-10-01, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF