Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS7A7300RGWT

Texas Instruments · Linear Voltage Regulators (LDO) · VQFN-20-EP(5x5)

TPS7A7300RGWT from Texas Instruments, in a VQFN-20-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT power_out Regulated output pin; a 4.7-μF or larger capacitance is required for stability.
2 SNS input Output voltage sense input pin.
3 FB input Output voltage feedback pin connected to the error amplifier; connect a 220-pF ceramic capacitor from FB to OUT.
4 PG output Active-high open-drain power-good output that indicates when the output voltage reaches 90% of the target.
5 50mV input Output voltage setting pin; connect to ground to increase the output voltage by 50 mV, or leave floating when not in use.
6 100mV input Output voltage setting pin; connect to ground to increase the output voltage by 100 mV, or leave floating when not in use.
7 200mV input Output voltage setting pin; connect to ground to increase the output voltage by 200 mV, or leave floating when not in use.
8 GND power_in Ground pin.
9 400mV input Output voltage setting pin; connect to ground to increase the output voltage by 400 mV, or leave floating when not in use.
10 800mV input Output voltage setting pin; connect to ground to increase the output voltage by 800 mV, or leave floating when not in use.
11 1.6V input Output voltage setting pin; connect to ground to increase the output voltage by 1.6 V, or leave floating when not in use.
12 NC unconnected Not internally connected to any electrical node; the datasheet says to connect this pin and the thermal pad to a large-area ground plane.
13 SS passive Soft-start pin; leaving it open gives the default soft start, and an external capacitor to ground sets the soft-start time through an RC delay with the internal resistance.
14 EN input Enable pin; logic high enables the device and logic low disables it.
15 IN power_in Unregulated supply voltage pin (VIN 1.5 V to 6.5 V); connect an input capacitor to this pin.
16 IN power_in Unregulated supply voltage pin (VIN 1.5 V to 6.5 V); connect an input capacitor to this pin.
17 IN power_in Unregulated supply voltage pin (VIN 1.5 V to 6.5 V); connect an input capacitor to this pin.
18 GND power_in Ground pin.
19 OUT power_out Regulated output pin; a 4.7-μF or larger capacitance is required for stability.
20 OUT power_out Regulated output pin; a 4.7-μF or larger capacitance is required for stability.
21 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-20-EP(5x5)
Category Power Supply Chip
Pins 21

CAD (KiCad official)

  • Symbol: TPS7A7300RGWT
  • Footprint: Package_DFN_QFN:QFN-20-1EP_5x5mm_P0.65mm_EP3.35x3.35mm
  • 3D model: VQFN-20-EP(5x5) (KiCad packages3D, STEP)
  • 3D model files: tps7a7300rgwt-etched.step / tps7a7300rgwt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps7a7300rgwt.step / tps7a7300rgwt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (39 pp, sha256 92d782fe857c9db3, retrieved 2026-10-26, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF