← Commit history

Initial commit: component/tps7a7200rgtr

Ray ·0657db3c92 ·
2 files changed +250
README.mdadded+53
@@ -0,0 +1,53 @@+# TPS7A7200RGTR++**Texas Instruments** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · VQFN-16-EP(3x3)++TPS7A7200RGTR from Texas Instruments, in a VQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SNS | input | Output voltage sense input pin connected to error amplifier. |+| 2 | FB | input | Output voltage feedback pin connected to error amplifier; requires 220-pF capacitor from pin to OUT. |+| 3 | PG | output | Active-high power-good open-drain output indicating when output voltage reaches 90% of target. |+| 4 | 50mV | input | Output voltage setting pin; connect to ground to increase output voltage by 50 mV or leave floating. |+| 5 | 100mV | input | Output voltage setting pin; connect to ground to increase output voltage by 100 mV or leave floating. |+| 6 | 200mV | input | Output voltage setting pin; connect to ground to increase output voltage by 200 mV or leave floating. |+| 7 | GND | power_in | Ground pin. |+| 8 | 400mV | input | Output voltage setting pin; connect to ground to increase output voltage by 400 mV or leave floating. |+| 9 | 800mV | input | Output voltage setting pin; connect to ground to increase output voltage by 800 mV or leave floating. |+| 10 | 1.6V | input | Output voltage setting pin; connect to ground to increase output voltage by 1.6 V or leave floating. |+| 11 | SS | input | Soft-start pin; leave open for default soft-start or connect capacitor to ground to enable RC-delay timing with integrated 50-kΩ resistor. |+| 12 | EN | input | Enable pin; drive high to enable device or low to disable device. |+| 13 | IN | power_in | Unregulated input supply pin; connect input capacitor; operates from 1.425 V to 6.5 V. |+| 14 | IN | power_in | Unregulated input supply pin; connect input capacitor; operates from 1.425 V to 6.5 V. |+| 15 | OUT | power_out | Regulated output pin; minimum 4.7-μF capacitance required for stability; supplies up to 2 A. |+| 16 | OUT | power_out | Regulated output pin; minimum 4.7-μF capacitance required for stability; supplies up to 2 A. |+| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-16-EP(3x3) |+| Category | Power Management (PMIC) |+| Pins | 17 |++## CAD (KiCad official)++- Symbol: `TPS7A7200RGTR`+- Footprint: `Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm`+- 3D model: VQFN-16-EP(3x3) (KiCad packages3D, STEP)+- 3D model files: `tps7a7200rgtr-etched.step` / `tps7a7200rgtr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps7a7200rgtr.step` / `tps7a7200rgtr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tps7a7200.pdf) (45 pp, sha256 `02a39262543199db`, retrieved 2026-09-23, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps7a7200rgtr-datasheet.pdf)
page.jsonadded+197
@@ -0,0 +1,197 @@+{+  "slug": "tps7a7200rgtr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, VQFN-16-EP(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "tps7a7200rgtr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tps7a7200rgtr.kicad_sym",+    "tps7a7200rgtr.kicad_mod",+    "tps7a7200rgtr.glb",+    "tps7a7200rgtr.step",+    "tps7a7200rgtr.lbr",+    "docs/hero.png",+    "docs/tps7a7200rgtr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TPS7A7200RGTR",+    "manufacturer": "Texas Instruments",+    "package": "VQFN-16-EP(3x3)",+    "pin_count": 17,+    "category": "Power Management (PMIC)",+    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+    "datasheet": "https://www.ti.com/lit/ds/symlink/tps7a7200.pdf",+    "parts": {+      "symbol": "tps7a7200rgtr.kicad_sym",+      "footprint": "tps7a7200rgtr.kicad_mod",+      "model_3d": "tps7a7200rgtr-etched.glb",+      "model_3d_plain": "tps7a7200rgtr.glb",+      "model_3d_step": "tps7a7200rgtr-etched.step",+      "model_3d_step_plain": "tps7a7200rgtr.step",+      "lbr": "tps7a7200rgtr.lbr"+    },+    "distributor_links": {+      "lcsc": "C180439"+    },+    "pins": [+      {+        "number": "1",+        "name": "SNS",+        "type": "input",+        "description": "Output voltage sense input pin connected to error amplifier."+      },+      {+        "number": "2",+        "name": "FB",+        "type": "input",+        "description": "Output voltage feedback pin connected to error amplifier; requires 220-pF capacitor from pin to OUT."+      },+      {+        "number": "3",+        "name": "PG",+        "type": "output",+        "description": "Active-high power-good open-drain output indicating when output voltage reaches 90% of target."+      },+      {+        "number": "4",+        "name": "50mV",+        "type": "input",+        "description": "Output voltage setting pin; connect to ground to increase output voltage by 50 mV or leave floating."+      },+      {+        "number": "5",+        "name": "100mV",+        "type": "input",+        "description": "Output voltage setting pin; connect to ground to increase output voltage by 100 mV or leave floating."+      },+      {+        "number": "6",+        "name": "200mV",+        "type": "input",+        "description": "Output voltage setting pin; connect to ground to increase output voltage by 200 mV or leave floating."+      },+      {+        "number": "7",+        "name": "GND",+        "type": "power_in",+        "description": "Ground pin."+      },+      {+        "number": "8",+        "name": "400mV",+        "type": "input",+        "description": "Output voltage setting pin; connect to ground to increase output voltage by 400 mV or leave floating."+      },+      {+        "number": "9",+        "name": "800mV",+        "type": "input",+        "description": "Output voltage setting pin; connect to ground to increase output voltage by 800 mV or leave floating."+      },+      {+        "number": "10",+        "name": "1.6V",+        "type": "input",+        "description": "Output voltage setting pin; connect to ground to increase output voltage by 1.6 V or leave floating."+      },+      {+        "number": "11",+        "name": "SS",+        "type": "input",+        "description": "Soft-start pin; leave open for default soft-start or connect capacitor to ground to enable RC-delay timing with integrated 50-kΩ resistor."+      },+      {+        "number": "12",+        "name": "EN",+        "type": "input",+        "description": "Enable pin; drive high to enable device or low to disable device."+      },+      {+        "number": "13",+        "name": "IN",+        "type": "power_in",+        "description": "Unregulated input supply pin; connect input capacitor; operates from 1.425 V to 6.5 V."+      },+      {+        "number": "14",+        "name": "IN",+        "type": "power_in",+        "description": "Unregulated input supply pin; connect input capacitor; operates from 1.425 V to 6.5 V."+      },+      {+        "number": "15",+        "name": "OUT",+        "type": "power_out",+        "description": "Regulated output pin; minimum 4.7-μF capacitance required for stability; supplies up to 2 A."+      },+      {+        "number": "16",+        "name": "OUT",+        "type": "power_out",+        "description": "Regulated output pin; minimum 4.7-μF capacitance required for stability; supplies up to 2 A."+      },+      {+        "number": "17",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "exposed pad 17 added from the footprint"+        ],+        "pages_sent": 45,+        "cost_usd": 0.4559,+        "at": "2026-09-23T03:25:54"+      },+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/tps7a7200.pdf",+        "pages": 45,+        "sha256": "02a39262543199db",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 17,+        "described": 17,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file