TPS7A6650HQDGNRQ1

{
  "slug": "tps7a6650hqdgnrq1",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tps7a6650hqdgnrq1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps7a6650hqdgnrq1.kicad_sym",
    "tps7a6650hqdgnrq1.kicad_mod",
    "tps7a6650hqdgnrq1.glb",
    "tps7a6650hqdgnrq1.step",
    "tps7a6650hqdgnrq1.lbr",
    "docs/hero.png",
    "docs/tps7a6650hqdgnrq1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps7a6650hqdgnrq1-hero.glb",
    "tps7a6650hqdgnrq1-hero.overlay.json"
  ],
  "component": {
    "mpn": "TPS7A6650HQDGNRQ1",
    "manufacturer": "Texas Instruments",
    "package": "MSOP-8",
    "pin_count": 8,
    "category": "Power Management (PMIC)",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps7a6650h-q1",
    "parts": {
      "symbol": "tps7a6650hqdgnrq1.kicad_sym",
      "footprint": "tps7a6650hqdgnrq1.kicad_mod",
      "model_3d": "tps7a6650hqdgnrq1-hero.glb",
      "model_3d_plain": "tps7a6650hqdgnrq1.glb",
      "model_3d_step": "tps7a6650hqdgnrq1-etched.step",
      "model_3d_step_plain": "tps7a6650hqdgnrq1.step",
      "lbr": "tps7a6650hqdgnrq1.lbr"
    },
    "distributor_links": {
      "lcsc": "C2871232",
      "digikey": "296-TPS7A6650HQDGNRQ1TR-ND",
      "mouser": "595-PS7A6650HQDGNRQ1"
    },
    "distributor_check": {
      "checked_at": "2026-10-11T14:58:46Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-TPS7A6650HQDGNRQ1TR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-PS7A6650HQDGNRQ1",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "Vin",
        "type": "power_in",
        "description": "Input power-supply voltage with a recommended range of 4 V to 40 V, an absolute maximum of -0.3 V to 45 V, and a 45 V withstand for 200 ms."
      },
      {
        "number": "2",
        "name": "EN",
        "type": "input",
        "description": "Enable pin: holding it below 0.4 V puts the device in standby, and it must be above 1.7 V to enable the regulator, with a recommended range of 0 V to 40 V."
      },
      {
        "number": "3",
        "name": "NC",
        "type": "unconnected",
        "description": "Not-connected pin with no internal connection."
      },
      {
        "number": "4",
        "name": "CT",
        "type": "output",
        "description": "Reset-pulse delay adjustment pin, connected through a capacitor to GND, with a recommended capacitor range of 100 pF to 100 nF and a voltage limit of 0 V to 20 V (absolute maximum 25 V)."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "6",
        "name": "PG",
        "type": "output",
        "description": "Open-drain output-ready pin that must connect to Vout through an external resistor and is pulled low when Vout falls below threshold, with VOL of 0.4 V maximum at 0.5 mA and a recommended range of 0 V to 5.5 V."
      },
      {
        "number": "7",
        "name": "NU",
        "type": "unconnected",
        "description": "Not-used pin; make no external connection."
      },
      {
        "number": "8",
        "name": "Vout",
        "type": "power_out",
        "description": "Regulated 5 V fixed output with a recommended range of 1.5 V to 5.5 V, a 7 V absolute maximum, and up to 50 mA output current."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Package naming differs: the MPN's package is HVSSOP (DGN), 8 pins per the pin table and the ordering; Pin 7 (NU) is marked type I in the pin table, but the datasheet says 'make no external connection', ; Pin 4 (CT) is marked type O in the datasheet. It is mapped to output, but it functions as a capacito"
        ],
        "pages_sent": 20,
        "cost_usd": 0.0725,
        "at": "2026-10-11T14:58:31"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps7a6650h-q1",
        "pages": 20,
        "sha256": "1abb202ad700afb3",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps7a6650hqdgnrq1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "847c4c5023fe1603fbd36900a5dcc4bd3901ba473f71d42c9a469f0236eaadf3",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps7a6650hqdgnrq1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "0f36fc439231f62944bb1e9d11b5fd04aa2a274f41e13193e678e73a2e7b9416",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}