main
Ray
Initial commit: component/tps7a4901dgnr
c0067ca
TPS7A4901DGNR
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · HVSSOP-8
TPS7A4901DGNR from Texas Instruments, in a HVSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Regulator output; a capacitor of at least 2.2 µF must be tied from this pin to ground to ensure stability. |
| 2 | FB | input | Input to the error amplifier; FB is used to set the output voltage of the device. |
| 3 | NC | unconnected | Not internally connected; this pin can either be left open or tied to GND. |
| 4 | GND | power_in | Ground connection for the device. |
| 5 | EN | input | Enable pin that turns the regulator on when VEN ≥ VEN(high) and off when VEN ≤ VEN(low); can be tied to IN if not used, and VEN must not exceed VIN. |
| 6 | NR/SS | passive | Noise-reduction/soft-start pin; an external capacitor connected here bypasses internal band-gap noise, reducing RMS output noise and setting the soft-start time. |
| 7 | DNC | unconnected | Do not connect; this pin must not be routed to any electrical net, including GND or IN. |
| 8 | IN | power_in | Input supply pin for the regulator. |
| 9 | PowerPAD | power_in | Exposed thermal pad; must either be left open or tied to ground, and should be soldered to the PCB ground plane to enhance thermal performance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HVSSOP-8 |
| Category | Power Management (PMIC) |
| Pins | 9 |
CAD (KiCad official)
- Symbol:
TPS7A4901DGNR - Footprint:
Package_SO:HVSSOP-8-1EP_3x3mm_P0.65mm_EP1.57x1.89mm - 3D model: HVSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.0 mm nominal HVSSOP height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
tps7a4901dgnr-etched.step/tps7a4901dgnr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps7a4901dgnr.step/tps7a4901dgnr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (39 pp, sha256
f69e957b22bcc2db, retrieved 2026-10-01, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TPS7A4901DGNR
**Texas Instruments** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · HVSSOP-8
TPS7A4901DGNR from Texas Instruments, in a HVSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Regulator output; a capacitor of at least 2.2 µF must be tied from this pin to ground to ensure stability. |
| 2 | FB | input | Input to the error amplifier; FB is used to set the output voltage of the device. |
| 3 | NC | unconnected | Not internally connected; this pin can either be left open or tied to GND. |
| 4 | GND | power_in | Ground connection for the device. |
| 5 | EN | input | Enable pin that turns the regulator on when VEN ≥ VEN(high) and off when VEN ≤ VEN(low); can be tied to IN if not used, and VEN must not exceed VIN. |
| 6 | NR/SS | passive | Noise-reduction/soft-start pin; an external capacitor connected here bypasses internal band-gap noise, reducing RMS output noise and setting the soft-start time. |
| 7 | DNC | unconnected | Do not connect; this pin must not be routed to any electrical net, including GND or IN. |
| 8 | IN | power_in | Input supply pin for the regulator. |
| 9 | PowerPAD | power_in | Exposed thermal pad; must either be left open or tied to ground, and should be soldered to the PCB ground plane to enhance thermal performance. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HVSSOP-8 |
| Category | Power Management (PMIC) |
| Pins | 9 |
## CAD (KiCad official)
- Symbol: `TPS7A4901DGNR`
- Footprint: `Package_SO:HVSSOP-8-1EP_3x3mm_P0.65mm_EP1.57x1.89mm`
- 3D model: HVSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.0 mm nominal HVSSOP height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files: `tps7a4901dgnr-etched.step` / `tps7a4901dgnr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps7a4901dgnr.step` / `tps7a4901dgnr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps7a49) (39 pp, sha256 `f69e957b22bcc2db`, retrieved 2026-10-01, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tps7a4901dgnr-datasheet.pdf)