main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tps7a4700rgwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tps7a4700rgwr: viewers · Ray
package.json tps7a4700rgwr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tps7a4700rgwr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/tps7a4700rgwr · Ray
tps7a4700rgwr-etched.fit.json tps7a4700rgwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps7a4700rgwr-etched.glb tps7a4700rgwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps7a4700rgwr-etched.step tps7a4700rgwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps7a4700rgwr.glb Publish 0.1.0 · Ray
tps7a4700rgwr.kicad_mod Publish 0.1.0 · Ray
tps7a4700rgwr.kicad_sym Publish 0.1.0 · Ray
tps7a4700rgwr.lbr Publish 0.1.0 · Ray
tps7a4700rgwr.step Publish 0.1.0 · Ray

TPS7A4700RGWR

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · VQFN-20-EP(5x5)

TPS7A4700RGWR from Texas Instruments, in a VQFN-20-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Regulator output requiring ≥10µF capacitor to ground for stability and recommended 47µF ceramic capacitor for optimal AC performance.
2 NC unconnected No connect pin that may remain floating or connected to any voltage between GND and IN.
3 SENSE input SENSE pin for control loop that must be connected to OUT, preferably at load point for maximum accuracy.
4 6P4V2 input Adds 6.4V to 1.4V reference voltage when connected to GND; do not connect other voltages and leave open if unused.
5 6P4V1 input Adds 6.4V to 1.4V reference voltage when connected to GND; do not connect other voltages and leave open if unused.
6 3P2V input Adds 3.2V to 1.4V reference voltage when connected to GND; do not connect other voltages and leave open if unused.
7 GND power_in Ground connection providing reference for all signal and power pins.
8 1P6V input Adds 1.6V to 1.4V reference voltage when connected to GND; do not connect other voltages and leave open if unused.
9 0P8V input Adds 0.8V to 1.4V reference voltage when connected to GND; do not connect other voltages and leave open if unused.
10 0P4V input Adds 0.4V to 1.4V reference voltage when connected to GND; do not connect other voltages and leave open if unused.
11 0P2V input Adds 0.2V to 1.4V reference voltage when connected to GND; do not connect other voltages and leave open if unused.
12 0P1V input Adds 0.1V to 1.4V reference voltage when connected to GND; do not connect other voltages and leave open if unused.
13 EN input Enable pin that enables device when voltage exceeds V+EN(HI) threshold of 2.0V; connect to IN if always enabled is required.
14 NR input Noise reduction pin requiring ≥10nF capacitor to ground for stability and recommended 1µF for optimal AC performance and minimal noise.
15 IN power_in Input power supply pin requiring ≥1µF capacitor to ground for stability and recommended 10µF close to device for reduced PCB layout sensitivity.
16 IN power_in Input power supply pin requiring ≥1µF capacitor to ground for stability and recommended 10µF close to device for reduced PCB layout sensitivity.
17 NC unconnected No connect pin that may remain floating or connected to any voltage between GND and IN.
18 NC unconnected No connect pin that may remain floating or connected to any voltage between GND and IN.
19 NC unconnected No connect pin that may remain floating or connected to any voltage between GND and IN.
20 OUT output Regulator output requiring ≥10µF capacitor to ground for stability and recommended 47µF ceramic capacitor for optimal AC performance.
21 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-20-EP(5x5)
Category Power Management (PMIC)
Pins 21

CAD (KiCad official)

  • Symbol: TPS7A4700RGWR
  • Footprint: Package_DFN_QFN:QFN-20-1EP_5x5mm_P0.65mm_EP3.35x3.35mm
  • 3D model: VQFN-20-EP(5x5) (KiCad packages3D, STEP)
  • 3D model files: tps7a4700rgwr-etched.step / tps7a4700rgwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps7a4700rgwr.step / tps7a4700rgwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (31 pp, sha256 8abb7994a91c0d4e, retrieved 2026-09-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF