main
History Download
Ray Initial commit: component/tps7a4533dcqt 9e07075

TPS7A4533DCQT

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223-6

TPS7A4533DCQT from Texas Instruments, in a SOT-223-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SHDN input Shutdown control; pull low to enter shutdown state; if unused, connect to VIN; typical shutdown current 3 μA; accepts 5V, 3V, or open-collector logic
2 IN power_in Power supply input; requires 1-10 μF bypass capacitor if located more than 6 inches from main filter; withstands ±20 V reverse voltage with <1 mA input current
3 GND power_in Ground reference
4 OUT power_out Regulated 3.3 V output; requires minimum 10 μF ceramic capacitor with ESR ≤ 3 Ω; maximum output current 1.5 A at 300 mV dropout; can supply up to 1 mA quiescent current
5 SENSE input Error amplifier feedback input for fixed-voltage mode; connect to OUT for local sensing or to load for remote Kelvin sensing to compensate parasitic PCB trace resistance; 600 μA bias current at rated output
6 GND power_in Ground connection; serves as exposed thermal pad in DCQ package and must be soldered to PCB for rated thermal performance

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-223-6
Category Power Management (PMIC)
Pins 6

CAD (KiCad official)

  • Symbol: TPS7A4533DCQT
  • Footprint: Package_TO_SOT_SMD:SOT-223-6
  • 3D model: SOT-223-6 (KiCad packages3D, STEP)
  • 3D model files: tps7a4533dcqt-etched.step / tps7a4533dcqt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps7a4533dcqt.step / tps7a4533dcqt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (38 pp, sha256 c8c2fe4b7b5bd34b, retrieved 2026-09-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF