component
TPS7A4515DCQR
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS7A4515DCQR
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223-6
TPS7A4515DCQR from Texas Instruments, in a SOT-223-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SHDN | input | SHDN puts the regulator into a low-power shutdown state when pulled low, can be driven by 5-V, 3-V or open-collector logic with a pullup, has VIH of 2 V minimum and VIL of 0.25 V maximum, and must be connected to VIN if unused. |
| 2 | IN | power_in | IN supplies power to the device with an input voltage range of VOUT + VDO to 20 V, is designed to withstand reverse voltages with respect to ground and OUT, and benefits from a 1-µF to 10-µF ceramic bypass capacitor when the device is more than six inches from the main input filter. |
| 3 | GND | power_in | Ground reference pin for the regulator; the exposed thermal pad that must be soldered to the PCB for rated thermal performance is specified for the KTT package, not the DCQ package. |
| 4 | OUT | power_out | OUT supplies power to the load and requires a minimum 10-µF ceramic output capacitor to prevent oscillations, with larger capacitors needed for large transient loads. |
| 5 | SENSE | input | SENSE is the error amplifier input for the fixed-voltage TPS7A4515 (1.5 V), should be connected to OUT for optimum regulation with a bias current of 600 µA at the rated output voltage, and can be pulled below ground in dual-supply systems. |
| 6 | GND | power_in | Ground pin, present on the DCQ package only. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-223-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| IN pin voltage (absolute maximum) | -20 | 20 | V | 4 | |||
| OUT pin voltage (absolute maximum) | -20 | 20 | V | 4 | |||
| Input-to-output differential (absolute maximum) | -20 | 20 | V | 4 | |||
| SENSE pin voltage (absolute maximum) | -20 | 20 | V | 4 | |||
| SHDN pin voltage (absolute maximum) | -20 | 20 | V | 4 | |||
| Maximum lead temperature (10-s soldering) | Tlead | 300 | °C | 10-s soldering time | 4 | ||
| Maximum junction temperature | TJMAX | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Input voltage range VIN | VIN | 20 | V | Minimum is VOUT + VDO (expression, not a number) | 4 | ||
| SHDN high-level input voltage | VIH | 2 | 20 | V | 4 | ||
| SHDN low-level input voltage | VIL | 0.25 | V | 4 | |||
| Recommended operating junction temperature range | TJ | -40 | 125 | °C | 4 | ||
| Regulated output voltage | VOUT | 1.485 | 1.5 | 1.515 | V | VIN = 2.21 V, ILOAD = 1 mA, TJ = 25°C | 5 |
| Regulated output voltage | VOUT | 1.447 | 1.5 | 1.545 | V | VIN = 2.5 V to 20 V, ILOAD = 1 mA to 1.5 A, TJ = full range | 5 |
| Minimum input voltage | VIN | 2.1 | 2.5 | V | ILOAD = 1.5 A, TJ = full range | 5 | |
| Line regulation | 2 | 6 | mV | VIN = 2.21 V to 20 V, ILOAD = 1 mA, TJ = full range | 5 | ||
| Load regulation | 2 | 9 | mV | VIN = 2.5 V, ILOAD = 1 mA to 1.5 A, TJ = 25°C | 6 | ||
| Load regulation | 18 | mV | VIN = 2.5 V, ILOAD = 1 mA to 1.5 A, TJ = full range | 6 | |||
| Dropout voltage | VDO | 0.02 | 0.05 | V | ILOAD = 1 mA, VIN = VOUT(NOMINAL), TJ = 25°C | 6 | |
| Dropout voltage | VDO | 0.06 | V | ILOAD = 1 mA, VIN = VOUT(NOMINAL), TJ = full range | 6 | ||
| Dropout voltage | VDO | 0.085 | 0.1 | V | ILOAD = 100 mA, VIN = VOUT(NOMINAL), TJ = 25°C | 6 | |
| Dropout voltage | VDO | 0.13 | V | ILOAD = 100 mA, VIN = VOUT(NOMINAL), TJ = full range | 6 | ||
| Dropout voltage | VDO | 0.17 | 0.18 | V | ILOAD = 500 mA, VIN = VOUT(NOMINAL), TJ = 25°C | 6 | |
| Dropout voltage | VDO | 0.25 | V | ILOAD = 500 mA, VIN = VOUT(NOMINAL), TJ = full range | 6 | ||
| Dropout voltage | VDO | 0.3 | 0.35 | V | ILOAD = 1.5 A, VIN = VOUT(NOMINAL), TJ = 25°C | 6 | |
| Dropout voltage | VDO | 0.45 | V | ILOAD = 1.5 A, VIN = VOUT(NOMINAL), TJ = full range | 6 | ||
| GND pin current | IGND | 1 | 1.5 | mA | ILOAD = 0 mA, TJ = full range | 6 | |
| GND pin current | IGND | 1.1 | 1.6 | mA | ILOAD = 1 mA, TJ = full range | 6 | |
| GND pin current | IGND | 3.3 | 3.5 | mA | ILOAD = 100 mA, VIN = VOUT(NOMINAL) + 1 V, TJ = full range | 6 | |
| GND pin current | IGND | 15 | 17 | mA | ILOAD = 500 mA, VIN = VOUT(NOMINAL) + 1 V, TJ = full range | 6 | |
| GND pin current | IGND | 80 | 90 | mA | ILOAD = 1.5 A, VIN = VOUT(NOMINAL) + 1 V, TJ = full range | 6 | |
| Shutdown threshold (OFF to ON) | 0.9 | 2 | V | VOUT = OFF to ON, TJ = full range | 6 | ||
| Shutdown threshold (ON to OFF) | 0.25 | 0.75 | V | VOUT = ON to OFF, TJ = full range | 6 | ||
| SHDN pin current | ISHDN | 0.01 | 1 | μA | VSHDN = 0 V, TJ = 25°C | 6 | |
| SHDN pin current | ISHDN | 3 | 20 | μA | VSHDN = 20 V, TJ = 25°C | 6 | |
| Quiescent current in shutdown | 0.01 | 1 | μA | VIN = 6 V, VSHDN = 0 V, TJ = 25°C | 6 | ||
| Current limit | ILIMIT | 1.6 | A | VIN = VOUT(NOMINAL) + 1 V, TJ = full range | 6 | ||
| Input reverse leakage current | IIL | 300 | μA | VIN = -20 V, VOUT = 0 V, TJ = full range | 6 | ||
| Reverse output current | IRO | 600 | 1000 | μA | VOUT = 1.5 V, VIN < 1.5 V, TJ = 25°C | 7 | |
| Junction-to-ambient thermal resistance (DCQ) | RθJA | 50.5 | °C/W | DCQ (SOT-223, 6-pin) package | 5 | ||
| Junction-to-case (top) thermal resistance (DCQ) | RθJC(top) | 31.1 | °C/W | DCQ (SOT-223, 6-pin) package | 5 | ||
| Junction-to-board thermal resistance (DCQ) | RθJB | 5.1 | °C/W | DCQ (SOT-223, 6-pin) package | 5 | ||
| Junction-to-top characterization parameter (DCQ) | ψJT | 1 | °C/W | DCQ (SOT-223, 6-pin) package | 5 | ||
| Junction-to-board characterization parameter (DCQ) | ψJB | 5 | °C/W | DCQ (SOT-223, 6-pin) package | 5 |
CAD (KiCad official)
- Symbol:
TPS7A4515DCQR - Footprint:
Package_TO_SOT_SMD:SOT-223-6 - 3D model: SOT-223-6 (KiCad packages3D, STEP)
- 3D model files:
tps7a4515dcqr-etched.step/tps7a4515dcqr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps7a4515dcqr.step/tps7a4515dcqr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (38 pp, sha256
c8c2fe4b7b5bd34b, retrieved 2026-10-10, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).